If cache was enabled, using ordered chapters could easily crash. The
reason is that enable_cache() reopens the demuxer and closes the old
one. The code after that (reading m->ordered_chapters etc.) then
accessed freed data.
This commit also avoids enabling cache for files which are not used
(which would make opening much slower).
Implement MP_GROW_ARRAY using MP_TARRAY_GROW. MP_GROW_ARRAY is basically
the earlier version of MP_TARRAY_GROW, and had different semantics. When
I added MP_TARRAY_GROW, I didn't dare to change it, but I think all code
that relied on the exact semantics of MP_GROW_ARRAY is gone now, or the
difference doesn't matter anyway. The semantic change is that now
(n+1)*2 elements are preallocated instead of n*2.
Also, implement MP_TARRAY_GROW using MP_RESIZE_ARRAY, which saves 1 line
of code.
In future, these macros should be part of TA.
Was disabled by default, was never used, internal support was
inconsistent and poor, and there has been virtually no interest in
creating translations.
And I don't even think that a terminal program should be translated.
This is something for (hypothetical) GUIs.
This adds support for ChapterSegmentEditionUID (pull request #258),
and also fixes issue #278 (pull request #292).
In fact, this is a straight merge of pr/292, which also contains pr/258.
When adding or removing frames to avoid 1-frame seeks on chapter
boundaries, the end of the chapter needs to be pushed or pulled by the
same amount to keep the intended end frame the same.
Now you can pretend the config file is quite literally command line
values dumped into a file, e.g.
--option1=value
--option2=value
...
although the underlying mechanisms are quite different.
Until now it used both char[] and bstr variants in the same code, which
was nasty. For example, the next commit would have additionally required
using memmove() to remove the prefix from the char[] string.
This fixes handling of e.g. "--vf=lavfi=[ noise ]" when used with
playback resume functionality. The spaces made it bug out, and there are
more cases where it could potentially break.
We could always escape for simplicity, but for now make old and new mpv
builds somewhat interoperable and use this new escaping only if needed.
This parses "%len%string" escapes, where string can contain any
characters. This method of escaping has also been used in other parts
of mplayer and mpv, so it's not a new idea.
(Also, don't confuse with URL encoding.)
Needed by the following commit.
Also change what the FFmpeg version info looks like, and additionally
dump lavfi/lavr/lswr versions. (Don't bother with libavdevice and
libpostproc, they're not important enough.)
Unfortunately, there's no "single" FFmpeg/Libav version due to fatal
braindeath on the FFmpeg/Libav side. We can't map the versions to
releases either (it simply isn't accessible anywhere).
The mouse area that covers the OSC is now only activated when the OSC is actually visible, to make sure the mouse still hides if it happens to be parked in the OSC area without making the OSC show up.
vo_image didn't handle OSD redrawing correctly anymore after OSD
redrawing behavior was changed in commit ed9295c (or maybe it has been a
problem for a longer time, and only showed up now). Basically, flip_page
was called unexpectedly and when no image was stored, which made it
crash trying to access the image. This could happen when for example
provoking OSD redrawing by pausing while using --vo=image, or by using
this command line: mpv --vo=image '-vf=lavfi="select=not(mod(n\,3))"'
Fix by removing the code that pretends vo_image can redraw OSD, and by
removing the framestepping fallback, which could make bad things happen
if the VO didn't support OSD redrawing. By now, there aren't any real
VOs that can't redraw the OSD properly, so this code is not needed and
just complicates things like vo_image.
This change likely will also be useful for vo_lavc (encoding).
Libass is technically an optional dependency, but in practice users
tend to disable libass accidentally or for the hell of it to get
something "minimal", without being aware of the consequences.
The deadzone-size is now by default zero, so movement on the entire window will make the OSC show up. To avoid it showing up by randomly moving mice, the option 'minmousemove' controls how many pixels movement (default: 1) between ticks (frames) are necessary to make the OSC show up.
The deadzone can be reenabeled by setting the option 'deadzonesize' (default: 0 = no deadzone, 1 = entire area between OSC and opposite window border), to restore the old behavior, set it to ~0.92.
The OSC will hide immediately when leaving the window or entering the deadzone (if existing) or after the time specified with 'hidetimeout' (default: 500ms) passed without any new movement. Set to negative value to disabling auto-hide (thus restoring old behavior). The OSC will never hide if hovered by the mouse.
Change talloc destructor so that they can never signal failure, and
don't return a status code. This makes our talloc copy even more
incompatible to upstream talloc, but on the other hand this is
preparation for getting rid of talloc entirely.
(The talloc replacement in the next commit won't allow the talloc_free
equivalent to fail, and the destructor return value would be useless.
But I don't want to change any mpv code either; the idea is that the
talloc replacement commit can be reverted for some time in order to
test whether the talloc replacement introduced a regression.)
Before this, they were shown on terminal only. Now they use the OSD
mechanism, which shows them on the video window or the terminal,
depending on settings and what's available.
Changing volume when audio is disabled was a feature request (github
issue #215), and was introduced with commit 327a779.
But trying to fix github issue #280 (volume is not correct in no-audio
mode, and if audio is re-enabled, the volume set in no-audio mode isn't
set), I concluded that it's not worth the trouble and the current
implementation is questionable all around. (For example, you can't
change the real volume in no-audio mode, even if the AO is open - this
could happen with gapless audio.) It's hard to get right, and the
current mixer code is already hilariously overcomplicated. (Virtually
all of mixer.c is an amalgamation of various obscure corner cases.)
So just remove this feature again.
Note that "options/volume" and "options/mute" still can be used in
idle mode to adjust the volume used next time, though these properties
can't be used during playback and thus not in audio-only mode.
Querying the volume still "works" in audio-only mode, though it can
return bogus values.
The argument or this change is that --loop should set how often the
file is played, not the number of additional repeats.
Based on pull request 277, with additions to the manpage and removal
of "--loop=0".
Signed-off-by: wm4 <wm4@nowhere>
The primary effect of this commit is that it fixes playback resume if
libquvi 0.9 and German locale are used, and libkdecore is on the system.
(See github issue #279.)
libquvi uses libproxy to determine system-wide proxy settings. libproxy
in turn loads libkdecore (if present) to determine KDE proxy settings.
libkdecore has a global constructor, which calls setlocale(LC_ALL, ""),
switching the current locale from "C" to what the user's settings. This
breaks some basic C string processing functions. Note that the locale
won't be set on program start, but only when libproxy calls dlopen() on
its config_kde module, which actually causes libkdecore to be loaded and
initialized.
In particular, with German locale, snprintf() would use "," instead of
"." when formatting float values, which in combination with playback
resume, would lead to parse errors the next time mpv was started, which
is how this issue was found.
I'd consider this a bug with libkdecore or at least libproxy. No library
should ever even touch locale: it might break basic expectations on C
string handling functions, might override program settings, and it's not
thread-safe. But this is so nasty and severe, that a quick hack to fix
it hurts less.
See github issue #279 and KDE bug #325902.
Before this patch, those will cause a crash:
mpv -playlist /dev/null
mpv -playlist <(bla) # if the result of bla is empty
Signed-off-by: Mohammad Alsaleh <CE.Mohammad.AlSaleh@gmail.com>
Signed-off-by: Stefano Pigozzi <stefano.pigozzi@gmail.com>
previously, mp_ring_read_cb() would allow reading past the end of the
ringbuffer when buffered > available. mp_ring_read() had logic for
splitting the read into two, which I duplicated into mp_ring_read_cb().
Since ordered editions can reference external files, when an ordered
chapter references another ordered edition, we have to go and figure out
what is is referencing as well.
When playing a Matroska file with ordered chapters, it may reference
another file by edition uid. When this edition is also ordered, it may
reference other files. When this occurs, the new segment/edition pair is
added to the list of sources to search for.
To support edition references in matroska chapters, editions need to be
remembered for each chapter and source. To facilitate easier management
of these now-paired uids, a single structure is used.
First, don't try to seek if the result is 0 (i.e. nothing found, or
subtitle event happens to be exactly on spot).
Second, since we never can make sure that we actually seek to the exact
subtitle PTS (seeking "snaps" to video PTS), offset the seek by 10ms.
Since most subtitle events are longer than 10ms, this should work fine.
The OSC will now display cache fill status between the timecodes, but only if it's below 48% to not clutter the interface with erratically changing values.
By default, the displayed value is multiplied by 2 to not confuse users who are unfamillar with the inner workings of the caching system. This can be disabled using the iAmAProgrammer=true setting.
You couldn't jump to the first entry in the playlist, if that entry was
marked as "too short". But this is usually fine, because it doesn't get
into the way of the user. (This feature is meant to allow being able to
jump backwards through the playlist even if a file immediately stops
playback right after initialization, not to prevent playing these files
at all.)
Also, apply the skip logic when wrapping around the playlist when going
backwards. This happens with --loop, because looping pretends the
playlist is infinitely repeated forwards and backwards (as long as the
playlist_prev/next commands are concerned).
Also add some comments.
When for example switching off the video stream, and --force-window is
used, forcefully reconfigure the VO. This will reset the size, and will
clear the window with black.
Needed some effort, because you don't always want to clear the window
on "discontinuity" points like going to a next file: this would
introduce some flicker.
Didn't handle VO events, didn't handle OSD message management.
There is probably still some strangeness left. --idle mode was never
made for direct interaction.
We can render subtitles if a VO is open. Whether we're decoding video
(i.e. if mpctx->sh_video is set) doesn't really matter.
Subtitle display with --force-window still doesn't quite work yet,
because there's nothing to actually force redrawing of subtitles in this
mode.
This commit adds the --force-window option, which will cause mpv always
to create a window when started. This can be useful when pretending that
mpv is a GUI application (which it isn't, but users pretend anyway), and
playing audio files would run mpv in the background without giving a
window to control it.
This doesn't actually create the window immediately: it only does so
only after initializing playback and when it is clear that there won't
be any actual video. This could be a problem when starting slow or
completely stuck network streams (mpv would remain frozen in the
background), or if video initialization somehow is stuck forever in
an in-between state (like when the decoder doesn't output a video
frame, but doesn't return an error either). Well, we can pretend only
so much that mpv is a GUI application.
Seeking normally resets the VO and throws away the currently displayed
frame, so if you seek outside the video with --keep-open enabled, the
window would normally be "stuck" and not redraw properly, because there
is no source video frame that could be redrawn. To deal with this, a
precise seek to the position of the last displayed video frame was
issued.
This usually worked, but it can fail for formats where seeking is broken
or not possible (consider reading from a pipe).
Fix this by changing the semantics for vo_seek_reset(): now the video
frame is remembered even after seeking.
Note that this changes behavior a little when trying to seek outside of
a file with --keep-open enabled. Since no actual seek is done anymore,
the video will remain "frozen" on the previous position, and you can't
unpause or framestep to see the video between current position and
actual end of the video. If users complain, I might revert this commit.
Commit 884c179 attempted to make it possible to skip backwards through
the playlist, even for files which fail to intitialize, or play for a
very short time. This was also used to prevent mpv from looping forever
and doing nothing if --loop=inf is used, and no file in the playlist is
playable.
This broke looping of very short files, because mpv was assuming that
this case happened. But there are legitimate use cases.
Fix this by making the looping case special. Instead of checking whether
playback was "very short", check whether something could be decoded and
displayed/played. If yes, allow looping.
Until now, mouse positions were just passed to the core as-is, even if
the mouse coordinates didn't map to any useful coordinate space, like
OSD coordinates. Lua scripting (used by the OSC, the only current user
of mouse input) had to translate mouse coordinates manually to OSD space
using mp_get_osd_mouse_pos(). This actually didn't work correctly in
cases mouse coordinates didn't map to OSD (like vo_xv): the mouse
coordinates the OSC got were correct, but input.c was still expecting
"real" mosue coordinates for mouse areas.
Fix this by converting to OSD coordinates before passing the mouse
position to the core.
Do this so that MOUSE_LEAVE can't be combined with other keys. (E.g.
keep 'w' pressed, then move the mouse outside of the mpv window; it will
print a warning what w-MOUSE_LEAVE is not mapped.)
It appears the last run missed all mp_tmsg().
Since the command parser also prints messages, it needs a new parameter
to pass a log context. We go the easy way and just require the input_ctx
to be passed, and use its mp_log.
There is uninitialized memory access if the actual size isn't passed
along. In the worst case, this can cause a source to be loaded against
the uninitialized memory, causing a false count of found versus required
sources, preventing the "Failed to find ordered chapter part" message.
Nothing really accesses it. Subtitle initialization actually does in a
somewhat meaningful way, but there container size is probably fine, as
subtitles were always initialized before the first video frame was
decoded.
Now writing -1 to the 'aspect' property resets the video to the auto
aspect ratio. Returning the aspect from the property becomes a bit more
complicated, because we still try to return the container aspect ratio
if no frame has been decoded yet.
This is preliminary. There are still tons of issues, and any aspect
of scripting may change in the future. I decided to merge this
(preliminary) work now because it makes it easier to develop it, not
because it's done. lua.rst is clear enough about it (plus some
sarcasm).
This requires linking to Lua. Lua has no official pkg-config file, but
there are distribution specific .pc files, all with different names.
Adding a non-pkg-config based configure test was considered, but we'd
rather not.
One major complication is that libquvi links against Lua too, and if
the Lua version is different from mpv's, you will get a crash as soon
as libquvi uses Lua. (libquvi by design always runs when a file is
opened.) I would consider this the problem of distros and whoever
builds mpv, but to make things easier for users, we add a terrible
runtime test to the configure script, which probes whether libquvi
will crash. This is disabled when cross-compiling, but in that case
we hope the user knows what he is doing.
This time it broke because I didn't actually test compiling vo_vaapi.c,
and it was using a macro from mp_image.h, which implicitly assumed
FFALIGN was available. Screw that too, and copy the definition of
ffmpeg's FFALIGN to MP_ALIGN_UP, and move these macros to mp_comnon.h.
The code using FFSWAP was moved from vo_vaapi.c to vaapi.c, which didn't
include libavutil/common.h anymore, just libavutil/avutil.h. The header
avutil.h doesn't include common.h recursively in Libav, so it broke
there.
Add FFSWAP as MPSWAP in mp_common.h (copy pasted from ffmpeg) to make
sure this doesn't happen again. (This kind of stuff happens all too
often, so screw libavutil.)
This code is actually quite inefficient: it reuses the (slow, simple)
screenshot code. It uses an inefficient method to read the image
(vaGetImage() instead of vaDeriveImage()), allocates new memory for
each frame that is read, and it tries all image formats again each
time.
Also, in my tests it always picked NV12 as image format, which is not
ideal if you actually want to filter the video, and vo_xv can't handle
this format without conversion either.
However, a user confirmed that it worked for him, so everything is fine.
Merged from pull request #246 by xylosper. Minor cosmetic changes, some
adjustments (compatibility with older libva versions), and manpage
additions by wm4.
Signed-off-by: wm4 <wm4@nowhere>
This wasn't enough and could lead to a cut off message shown on OSD.
Just make it dynamic, since we already use dynamic memory allocation
at this point anyway.
The problem with DVD/BD and playback resume is that most often, the
filename is just "dvd://", while the actual path to the DVD disk image
is given with --dvd-device. But playback resume works on the filename
only.
Add a pretty bad hack that includes the path to the disk image if the
filename starts with dvd://, and the same for BD respectively. (It's a
bad hack, but I want to go to bed, so here we go. I might revert or
improve it later, depending on user feedback.)
We have to cleanup the global variable mess around the dvd_device.
Ideally, this should go into MPOpts, but it isn't yet. Make the code
paths in mplayer.c take MPOpts anyway.
By default, libavformat uses UDP for rtsp playback. This doesn't work
very well. Apparently the reason is that the buffer sizes libavformat
chooses for UDP are way too small, and switching to TCP gets rid of this
issue entirely (thanks go to Reimar Döffinger for figuring this out).
In theory, you can set buffer sizes as libavformat options, but that
doesn't seem to help.
Add an option to select the rtsp transport, and make TCP the default.
Also remove an outdated comment from stream.c.
This is for properties that normally show a bar, and thus do not show an
OSD message (as per classic mplayer behavior). Setting an extra_msg
allows showing an OSD message anyway, except if OSD messages are
explicitly suppressed.
This refactors the whole show_property_osd() function a bit, and
replaces the weird sep field with a more general method.
Allows for example: --status-msg='${?pause==yes:(Paused) } ...' to
emulate the normal terminal status line. It's useful in other situations
too.
I'm a bit worried about extending this mini-DSL, and sure hope nobody
will implement a generic formula evaluator at some point in the future.
But for now we're probably safe.
In most cases, it's better if deinterlacing happens before any other
filtering, so prepend the filter to the user's filter list, instead
of appending it.
Instead of hardcoding a single filter. This might be helpful for
modeling the vaapi deinterlacer as a video filter. The idea is that a
software deinterlacer would be tried first, and if that fails (because
vaapi hardware decoding uses HW surfaces, which a software deinterlacer
does not accept), the vaapi filter would be tried.
The volume is set as soon as the audio chain is created again. This
works only in softvol mode. For system wide volume or otherwise
externally user controllable volume, this code is intentionally
disabled. It would be extremely weird if changing volume (while audio is
not initialized) would do nothing, and then suddenly change it when the
audio chain is created.
There's another odd corner case: the user-set volume will be thrown away
if it's set before the _first_ audio chain initialization. This is
because the volume restore logic recognizes a change from nothing to
softvol or an AO, and circumventing that would require additional code.
Also, we don't even know the start volume before that point.
Forcing the volume with --volume will can override the volume set during
no-audio mode, depending on the situation.
Note that this is intentionally never done if the AO or softvolume is
different, or if the current volume control method is thought to control
system wide volume (such as ALSA) or otherwise user controllable (such
as PulseAudio). The intention is to keep things robust and to avoid
messing with the user's audio settings as far as possible, while still
providing the ability to resume volume if it makes sense.
Refactor how mixer.c does volume/mute restoration and initialization.
Move to handling of --volume and --mute to mixer.c. Simplify the
implementation of these and hopefully fix bugs/strange behavior related
to using them as file-local options (this uses a somewhat dirty trick:
the option values are reverted to "auto" after initialization). Put most
code related to initialization and volume restoring in probe_softvol()
and restore_volume(). Having this code all in one place is less
confusing.
Instead of trying to detect whether to use softvol at runtime, detect it
at initialization time using AOCONTROL_GET_VOLUME (same with mute,
AOCONTROL_GET_MUTE). This implies we expect SET_VOLUME/SET_MUTE to work
if the GET variants work. Hopefully this is always the case.
This is also preparation for being able to change volume/mute settings
if audio is disabled, and for allowing restoring value with playback
resume.
It's quite unlikely, but functions like mp_find_user_config_file() can
return NULL, e.g. if $HOME is unset.
Fix all the code that didn't check for this correctly yet.
Remove the ifdef hell from mp_find_user_config_file(). Move the win32
specific code (for MinGW and Cygwin) to path-win.c. The behavior should
be about the same, but I can't be sure due to lack of testing and
because the old path.c code was hard to follow. (I expect those who care
about windows will fix things, should issues pop up - sorry.)
One difference is that the new code will always force MPV_HOME. It looks
like the old code preferred the mpv config dir in the exe dir if it
exists.
Also, make sure MP_PATH_MAX has enough space, even if the equivalent
wchar_t string is not 0-terminated with PATH_MAX (because apparently the
winapi doesn't require this). (Actually, maybe we should just kill all
uses of PATH_MAX/MP_PATH_MAX.)
