libass had an API to configure this since 2013. mpv always used
ASS_FONTPROVIDER_AUTODETECT, because usually there's little reason to
use anything else. The intention of the now added option is to allow
users to disable use of system fonts.
I didn't consider it worth the trouble to add the coretext and
directwrite enum items from ASS_DefaultFontProvider. The "auto" choice
will have the same effect if they're available. Also, the part of the
code which defines the option does not necessarily have libass available
(it's still optional!), so defining all enum items as choices is icky. I
still added fontconfig, since that may be nice to emulate a nostalgic
2010 feeling of mpv freezing on fontconfig.
The option for OSD is even less useful. (But you get it for free, and
why pass up a chance to add yet another useless option?)
This is not quite what was requested in #6947, but as close as it gets.
We default to EGL instead of GLX now, which means vdpau only works
if we explicitly specify that we want a GLX context, as vdpau lacks
interop for EGL.
Update the hwdec documentation to reflect this.
Concerns #6980.
The question came up on how a client would figure out where
screenshot-directory saved its screenshots if it contained
mpv-specific expansions. This command should remedy the situation
by providing a way for the client to ask mpv to do an expansion.
This flag makes mpv continue using the PulseAudio driver even if the
sink is suspended.
This can be useful if JACK is running with PulseAudio in bridge mode and
the sink-input assigned to mpv is the one JACK controls, thus being
suspended.
By forcing mpv to still use PulseAudio in this case, the user can now
adjust the sink to an unsuspended one.
Replace the "+" with "/". The "+" was supposed to imply that the cache
is the sum of the time (demuxer cache) and the size in bytes (stream
cache). We could not provide something nicer, because we had no idea how
many seconds of media was buffered in the stream cache.
Now the stream cache is done, and both the duration and byte size show
the amount buffered in the demuxer cache. Hopefully "/" is better to
imply this properly. Update the manpage explanations too.
skip-logo.lua is just what I wanted to have. Explanations are on the top
of that file. As usual, all documentation threatens to remove this stuff
all the time, since this stuff is just for me, and unlike a normal user
I can afford the luxuary of hacking the shit directly into the player.
vf_fingerprint is needed to support this script. It needs to scale down
video frames as part of its operation. For that, it uses zimg. zimg is
much faster than libswscale and generates more correct output. (The
filter includes a runtime fallback, but it doesn't even work because
libswscale fucks up and can't do YUV->Gray with range adjustment.)
Note on the algorithm: seems almost too simple, but was suggested to me.
It seems to be pretty effective, although long time experience with
false positives is missing. At first I wanted to use dHash [1][2], which
is also pretty simple and effective, but might actually be worse than
the implemented mechanism. dHash has the advantage that the fingerprint
is smaller. But exact matching is too unreliable, and you'd still need
to determine the number of different bits for fuzzier comparison. So
there wasn't really a reason to use it.
[1] https://pypi.org/project/dhash/
[2] http://www.hackerfactor.com/blog/index.php?/archives/529-Kind-of-Like-That.html
Helper for the ab-loop-dump-cache command, see manpage additions.
This is kind of shit. Not only is this a very "special" feature, but it
also vomits more messy code into the big and already bloated demux.c,
and the implementation is sort of duplicated with the dump-cache code.
(Except it's different.) In addition, the results sort of depend what a
video player would do with the dump-cache output, or what the user wants
(for example, a user might be more interested in the range of output
audio, instead of the video).
But hey, I don't actually need to justify it. I'm only justifying it for
fun.
But don't tell the reader which those APIs are. Hope the user will just
search for "async" in the Lua section (lua.rst). But of course, nobody
will ever care about anything related to this.
That's right, and it's probably not the end of it. I'll just claim that
I have no idea how to create a proper user interface for this, so I'm
creating multiple partially-orthogonal, of which some may work better in
each of its special use cases.
Until now, there was --record-file. You get relatively good control
about what is muxed, and it can use the cache. But it sucks that it's
bound to playback. If you pause while it's set, muxing stops. If you
seek while it's set, the output will be sort-of trashed, and that's by
design.
Then --stream-record was added. This is a bit better (especially for
live streams), but you can't really control well when muxing stops or
ends. In particular, it can't use the cache (it just dumps whatever the
underlying demuxer returns).
Today, the idea is that the user should just be able to select a time
range to dump to a file, and it should not affected by the user seeking
around in the cache. In addition, the stream may still be running, so
there's some need to continue dumping, even if it's redundant to
--stream-record.
One notable thing is that it uses the async command shit. Not sure
whether this is a good idea. Maybe not, but whatever. Also, a user can
always use the "async" prefix to pretend it doesn't.
Much of this was barely tested (especially the reinterleaving crap),
let's just hope it mostly works. I'm sure you can tolerate the one or
other crash?
Until now, the following could happen: if you set a 1GB forward cache,
and a 1GB backward cache, and you opened a 2GB file, it would prune away
the data cached at the start as playback progressed past the 50% mark.
With this commit, nothing gets pruned, because the total memory usage
will still be 2GB, which equals the total allowed memory usage of 1GB +
1GB.
There are no explicit buffers (every packet is malloc'ed and put into a
linked list), so it all comes down to buffer size computations. Both
reader and prune code use these sizes to decide whether a new packet
should be read / an old packet discarded. So just add the remaining free
"space" from the forward buffer to the available backward buffer. Still
respect if the back buffer is set to 0 (e.g. unseekable cache where it
doesn't make sense to keep old packets).
We need to make sure that the forward buffer can always append, as long
as the forward buffer doesn't exceed the set size, even if the back
buffer "borrows" free space from it. For this reason, always keep 1 byte
free, which is enough to allow it to read a new packet. Also, it's now
necessary to call pruning when adding a packet, to get back "borrowed"
space that may need to be free'd up after a packet has been added.
I refrained from doing the same for forward caching (making forward
cache use unused backward cache). This would work, but has a
disadvantage. Assume playback starts paused. Demuxing will stop once the
total allowed low total cache size is reached. When unpausing, the
forward buffer will slowly move to the back buffer. That alone will not
change the total buffer size, so demuxing remains stopped. Playback
would need to pass over data of the size of the back buffer until
demuxing resume; consider this unacceptable. Live playback would break
(or rather, would not resume in unintuitive ways), even normal streaming
may break if the server invalidates the URL due to inactivity. As an
alternative implementation, you could prune the back buffer immediately,
so the forward buffer can grow, but then the back buffer would never
grow. Also makes no sense.
As far as the user interface is concerned, the idea is that the limits
on their own aren't really meaningful, the purpose is merely to vaguely
restrict the cache memory usage. There could be just a single option to
set the total allowed memory usage, but the separate backward cache
controls the default ratio of backward/forward cache sizes. From that
perspective, it doesn't matter if the backward cache uses more of the
total buffer than assigned, if the forward buffer is complete.
Make most of the demuxer options runtime-changeable. This includes the
cache options and stream recording. The manpage documents some of the
possibly weird issues related to this.
In particular, the disk cache isn't shuffled around if the setting
changes at runtime.
I once created this because someone wanted to use vapoursynth without
the Python dependency. No idea if anyone ever actually used it. It's
sort of icky (it calls itself "lazy" to preempt complaints about how
much it sucks), and complicates the build process. Kill it.
It seems much more promising to have something like this:
https://github.com/vapoursynth/vapoursynth/issues/386
This would either solve the build distribution problem by relaxing the
Python dependency, and/or allow a Lua backend to be included without
pain.
This filter wasn't referenced anywhere and thus was dead code. It should
have been in the audio filter list in user_filters.c. This was intended
as compatibility wrapper (to avoid breaking old command lines and config
files), and has no real use. Apparently I forgot to add it to the filter
list (did I even test this shit?), and so it was rotting around for 1.5
years doing nothing (just like myself).
Note that users can just use the libavfilter provided filter to force
resampling, just that it has a different name and different options.
There's also af_format to force inserting auto conversion through the
internal f_swsresample filter.
Normally I use the OSC like this: not at all, but have a key binding
that does "cycle osc" to show it. And in that case, I don't really want
it to overlap the damn video.
I could use the zoom/pan options to move the video out of the way, but
this is also sort of annoying. Likewise, you could write a script or so
which does this automatically if the OSC appears, but that's still
annoying, and computing values for these options such that the video is
moved correctly is tricky.
So I added a bunch of options that set explicit video borders (previous
commit), and a option for the OSC to use them (this commit).
Disabled by default, since I'm afraid this is too awkward and
unpolished, especially with OSC default settings.
I'm also using "osc-visibility=always". Effectively, making the OSC
appear will box the video, and making it disappear (by unloading
osc.lua) will restore the video back to normal.
Semantics a bit questionable. This is done for the OSC (next commit),
and a comment added the manpage explicitly states this. Meaning this is
probably garbage and needs to revisit when the OSC changes and/or
someone wants to use this margin feature for something else.
Not sure about the subtitle thing. It's imaginable that someone uses
these options to create empty borders for subtitles on the bottom, so
subtitles should be located there. On the other hand, this gives a
rather unpolished user experience when using the (later added) OSC
feature to not overlap with the video. There's not much of a point if
the OSC still overlaps the video. However, I'm too lazy to think about
this, so it stays like it is.
Somewhat similar to the old --cache-file, except for the demuxer cache.
Instead of keeping packet data in memory, it's written to disk and read
back when needed.
The idea is to reduce main memory usage, while allowing fast seeking in
large cached network streams (especially live streams). Keeping the
packet metadata on disk would be rather hard (would use mmap or so, or
rewrite the entire demux.c packet queue handling), and since it's
relatively small, just keep it in memory.
Also for simplicity, the disk cache is append-only. If you're watching
really long livestreams, and need pruning, you're probably out of luck.
This still could be improved by trying to free unused blocks with
fallocate(), but since we're writing multiple streams in an interleaved
manner, this is slightly hard.
Some rather gross ugliness in packet.h: we want to store the file
position of the cached data somewhere, but on 32 bit architectures, we
don't have any usable 64 bit members for this, just the buf/len fields,
which add up to 64 bit - so the shitty union aliases this memory.
Error paths untested. Side data (the complicated part of trying to
serialize ffmpeg packets) untested.
Stream recording had to be adjusted. Some minor details change due to
this, but probably nothing important.
The change in attempt_range_joining() is because packets in cache
have no valid len field. It was a useful check (heuristically
finding broken cases), but not a necessary one.
Various other approaches were tried. It would be interesting to list
them and to mention the pros and cons, but I don't feel like it.
Some OGG web radio streams use timestamp resets when a new song starts
(you can find those Xiph's directory - other streams there don't show
this behavior). Basically, the OGG stream behaves like concatenated OGG
files, and "of course" the timestamps will start at 0 again when the
song changes. This is very inconvenient, and breaks the seekable demuxer
cache. In fact, any kind of seeking will break
This is more time wasted in Xiph's bullshit. No, having timestamp resets
by design is not reasonable, and fuck you. I much prefer the awful
ICY/mp3 streaming mess, even if that's lower quality and awful. Maybe it
wouldn't be so bad if libavformat could tell us WHERE THE FUCK THE RESET
HAPPENS. But it doesn't, and the randomly changing timestamps is the
only thing we get from its API.
At this point, demux_lavf.c is like 90% hacks. But well, if libavformat
applies this strange mixture of being clever for us vs. giving us
unfiltered garbage (while pretending it abstracts everything, and hiding
_useful_ implementation/low level details), not much we can do.
This timestamp linearizing would, in general, probably be better done
after the decoder, because then we wouldn't need to deal with timestamp
resets. But the main purpose of this change is to fix seeking within the
demuxer cache, so we have to do it on the lowest level.
This can probably be applied to other containers and video streams too.
But that is untested. Some further caveats are explained in the manpage.
Until now, this usually passed a single audio frame to the decoder, and
then did a backstep operation (cache seek + frame search) again. This is
probably not very efficient, especially considering it has to search the
packet queue from the "start" every time again.
Also, with most audio codecs, an additional "preroll" frame was passed
first. In these cases, the preroll frame would make up 50% of audio
decoding time. Also not very efficient.
Attempt to fix this by returning multiple frames at once. This reduces
the number of backstep operations and the ratio the preoll frames. In
theory, this should help efficiency. I didn't test it though, why would
I do this? It's just a pain. Set it to unscientific 10 frames.
(Actually, these are 10 keyframes, so it's much more for codecs like
TrueHD. But I don't care about TrueHD.)
This commit changes some other implementation details. Since we can
return more than 1 non-preroll keyframe to the decoder, some new state
is needed to remember how much. The resume packet search is adjusted to
find N ("total") keyframe packets in general, not just preroll frames.
I'm removing the special case for 1 preroll packet; audio used this, but
doesn't anymore, and it's premature optimization anyway.
Expose the new mechanism with 2 new options. They're almost completely
pointless, since nobody will try them, and if they do, they won't
understand what these options truly do. And if they actually do, they
most likely would be capable of editing the source code, and we could
just hardcode the parameters. Just so you know that I know that the
added options are pointless.
The following two things are truly unrelated to this commit, and more
like general refactoring, but fortunately nobody can stop me.
Don't set back_seek_pos in dequeue_packet() anymore. This was sort of
pointless, since it was set in find_backward_restart_pos() anyway (using
some of the same packets). The latter function tries to restrict this to
the first keyframe range though, which is an optimization that in theory
might break with broken files (duh), but in these cases a lot of other
things would be broken anyway.
Don't set back_restart_* in dequeue_packet(). I think this is an
artifact of the old restart code (cf. ad9e473c55). It can be done
directly in find_backward_restart_pos() now. Although this adds another
shitty packet search loop, I prefer this, because clearer what's
actually happening.
Before this commit, there was a single process_decoded_frame() function.
It handled various aspects of dealing with a newly decoded frame. Move
some of these to a separate process_output_frame() function.
This new function is called in the order the frames are returned to the
playback core. Some correct_audio_pts() (was process_audio_frame())
becomes slightly less awkward due to this, and the timestamp smoothing
can actually work in backward playback mode now (thus moving p->pts out
of reset_decoder()).
Behavior for normal playback also changes subtly. This shouldn't matter
in sane cases, but if you mix broken files, --no-correct-pts, and
timeline stuff, differences in behavior might be visible.
Timeline clipping (EDL/ordered chapters) works now, because it's done
before "transforming" the timestamps. Audio timestamp smoothing happens
after it, which is a behavior change, but should be more correct. This
still runs crazy_video_pts_stuff() before everything else. On the pther
hand, --no-correct-pts or missing timestamp processing is done last. But
these things didn't really work with timeline before.
And add simpler aliases for the modes.
I'm not sure how to name things, and the option list is in general full
of different conventions. Some names are shortened, some are explicit
and long.
I guess options that have a chance to be used normally (i.e. not obscure
tuning or debugging) should have a short and convenient names.
In this specific case, play-direction is like a mixture of both. It
should be either playback-direction or play-dir, not shorten one word
but not the other.
The convenience aliases are because I got sick of typing out "backward".
I guess "back" would also do it, but there's no proper antonym (and
maybe it's "wrong" in the strict sense of the word).
Together with the previous commit, this seems to make backward playback
work in files with vorbis and mp3 audio codecs.
For Vorbis (with libavcodec's decoder, didn't test libvorbis), the first
packet was just always completely discarded. This happened even though
we tell libavcodec that we do discarding of padding manually. It simply
happened inside the codec, not libavcodec's general initial padding
handling. In addition, the first output decoded frame seems to contain
partial data. (Unlike the opus decoder, it doesn't report any padding at
all.)
The Opus decoder (again libavcodec only tested) reports an initial
padding, but it appears to be too small, and it sounds right only with 2
packets discarded. So its status doesn't change.
I'm not sure why I need 2 frames for mp3, but with that value I had
success on the samples I tested.
Clarify existing semantics for the --start/--end/--length options.
De-emphasize the difference between absolute and relative timestamps,
since they've not been different by default since mpv 0.14.
Document a bug, that also happens to work as a feature: if the option
value begins with spaces, the code for checking for relative timestamps
is inactive, and they're always considered absolute. The check is done
on the first character of the string - so even a negative timestamp will
be treated as absolute.)
Yes, this is useful in extremely rare situations, such as when you
really want send a specific timestamp (even a negative one) to the
demuxer.
This changes the behavior of the --ab-loop-a/b options. In addition, it
makes it work with backward playback mode.
The most obvious change is that the both the A and B point need to be
set now before any looping happens. Unlike before, unset points don't
implicitly use the start or end of the file. I think the old behavior
was a feature that was explicitly added/wanted. Well, it's gone now.
This is because of 2 reasons:
1. I never liked this feature, and it always got in my way (as user).
2. It's inherently annoying with backward playback mode.
In backward playback mode, the user wants to set A/B in the wrong order.
The ab-loop command will first set A, then B, so if you use this command
during backward playback, A will be set to a higher timestamps than B.
If you switch back to forward playback mode, the loop would stop
working. I want the loop to just continue to work, and the chosen
solution conflicts with the removed feature.
The order issue above _could_ be fixed by also switching the AB-loop
user option values around on direction switch. But there are no other
instances of option changes magically affecting other options, and doing
this would probably lead to unexpected misery (dying from corner cases
and such).
Another solution is sorting the A/B points by timestamps after copying
them from the user options. Then A/B options set in backward mode will
work in forward mode. This is the chosen solution. If you sort the
points, you don't know anymore whether the unset point is supposed to
signify the end or the start of the file.
The AB-loop code is slightly better abstracted now, so it should be easy
to restore the removed feature. It would still require coming up with a
solution for backwards playback, though.
A minor change is that if one point is set and the other is unset, I'm
rendering both the chapter markers and the marker for the set point.
Why? I don't know. My test file had chapters, and I guess I decided this
looked better.
This commit also fixes some subtle and obvious issues that I already
forgot about when I wrote this commit message. It cleans up some minor
code duplication and nonsense too.
Regarding backward playback, the code uses an unsanitary mix of internal
("transformed") and user timestamps. So the play_dir variable appears
more than usual.
To mention one unfixed issue: if you set an AB-loop that is completely
past the end of the file, it will get stuck in an infinite seeking loop
once playback reaches the end of the file. Fixing this reliably seemed
annoying, so the fix is "just don't do this". It's not a hard freeze
anyway.
Has been deprecated for almost 3 years. Manpage didn't mention the
deprecation, but CLI and release notes did. It wouldn't be much effort
to keep this option working, but I just don't see the damn point.
--start/--end can specify chapters using special syntax, which is
equivalent.
This commit generally fixes backward playing in wav, at least in most
PCM cases.
libavformat's wav demuxer (and actually all other raw PCM based
demuxers) have a specific behavior that breaks backward demuxing. The
same thing also breaks persistent seek ranges in the demuxer cache,
although that's less critical (it just means some cached data gets
discarded). The backward demuxing issue is fatal, will log the message
"Demuxer not cooperating.", and then typically stop doing anything.
Unlike modern media formats, these formats don't organize media data in
packets, but just wrap a monolithic byte stream that is described by a
header. This is good enough for PCM, which uses fixed frames (a single
sample for all audio channels), and for which it would be too expensive
to have per frame headers.
libavformat (and mpv) is heavily packet based, and using a single packet
for each PCM frame causes too much overhead. So they typically "bundle"
multiple frames into a single packet. This packet size is obviously
arbitrary, and in libavformat's case hardcoded in its source code.
The problem is that seeking doesn't respect this arbitrary packet
boundary. Seeking is sample accurate. You can essentially seek inside a
packet. The resulting packets will not be aligned with previously
demuxed packets. This is normally OK.
Backward seeking (and some other demuxer layer features) expect that
demuxing an earlier demuxed file position eventually results in the same
packets, regardless of the seeks that were done to get there. I like to
call this "deterministic" demuxing. Backward demuxing in particular
requires this to avoid overlaps, which would make it rather hard to get
continuous output.
Fix this issue by detecting wav and hopefully other raw audio formats
with a heuristic (even PCM needs to be detected as heuristic). Then, if
a seek is requested, align the seek timestamps on the guessed number of
samples in the audio packets returned by the demuxer.
The heuristic excludes files with multiple streams. (Except "attachment"
video streams, which could be an ID3 tag. Yes, FFmpeg allows ID3 tags on
WAV files.) Such files will inherently use the packet concept in some
way.
We don't know how the demuxer chooses the internal packet size, but we
assume that it's fixed and aligned to PCM frame sizes. The frame size is
most likely given by block_align (the native wav frame size, according
to Microsoft). We possibly need to explicitly read and discard a packet
if the seek is done without reading anything before that. We ignore any
subsequent packet sizes; we need to avoid the very last packet, which
likely has a different size.
This hack should be rather benign. In the worst case, it will "round"
the seek target a little, but the maximum rounding amount is bounded.
Maybe we _could_ round up if SEEK_FORWARD is specified, but I didn't
bother.
An earlier commit fixed the same issue for mpv's demux_raw.
An alternative, and probably much better solution would be clipping
decoded data by timestamp. demux.c could allow the type of overlap the
wav demuxer introduces, and instruct the decoder to clip the output
against the last decoded timestamp. There's already an infrastructure
for this (demux_packet.end field) used by EDL/ordered chapters.
Although this sounds like a good solution, mpv unfortunately uses floats
for timestamps. The rounding errors break sample accuracy. Even if you
used integers, you'd need a timebase that is sample accurate (not always
easy, since EDL can merge tracks with different sample rates).
As well as other filtering. I was writing this with the assumption that
timestamps go backwards (which I first planned to do). But in fact,
timestamps go forward, frame durations are positive, and adding a frame
duration to a timestamp yields the correct result. The only strange
thing is that timestamps are negative.
Also, media of course goes backwards. In other possible implementation,
filters would see normal forward playback, interrupted by seeks or
discontinuities. It turns out the current implementation of providing a
continuous backward media stream is probably better for filters.
Even deinterlacing seems to work. libavcodec always outputs fields in as
interleaved frames (i.e. fields are not reversed), and making up
timestamps for the new frames (when doubling the framerate) works
exactly like like in the forward case.
Actually the previous paragraph was a lie, and libavcodec does not
output fields as interleaved frames in rare cases. Sometimes AVFrame
contains single fields. In this case you'd need to inverse the field
dominance for deinterlacing filters to work correctly.
The way backward playback is implemented doesn't break basic assumptions
about timestamps after the decoder, so I guess all the encoding mode
needs to do is to adjust for the start offset, which it already does.
Though I might be wrong and my test was possibly flawed.
Stream recording on the other hand will fail immediately with
--record-file, and --stream-record will probably yield unexpected
results if any backstep seeks are done.
Make --audio-backward-overlap default to 2 for Opus. I have no idea why
this is needed. It seems to fix backward decoding though (going purely
by listening).
Normally, this should not be needed, since initial padding is completely
contained within the first packet (normally, and in the case I tested).
So the 2nd packet/frame should be fine, but for some unknown reason it
works only with the 3rd.
The only reasonable solution to this is probably to make discarding of
preroll frames based on timestmaps, instead of frame/packet count. But
then you get issues with video and its dumb timestamp reordering. So for
now, fuck it.
This seems more useful in general. This change also happens to fix a
miscounting of preroll packets when some of them were "rounded" away,
and which could make it stuck.
Also a simple intra-refresh encode with x264 (and muxed to mkv by it)
seems to work now. I guess I misinterpreted earlier results.
Just "mpv file.mkv --play-direction=backward" did not work, because
backward demuxing from the very end was not implemented. This is another
corner case, because the resume mechanism so far requires a packet
"position" (dts or pos) as reference. Now "EOF" is another possible
reference.
Also, the backstep mechanism could cause streams to find different
playback start positions, basically leading to random playback start
(instead of what you specified with --start). This happens only if
backstep seeks are involved (i.e. no cached data yet), but since this is
usually the case at playback start, it always happened. It was racy too,
because it depended on the order the decoders on other threads requested
new data. The comment below "resume_earlier" has some more blabla.
Some other details are changed.
I'm giving up on the "from_cache" parameter, and don't try to detect the
situation when the demuxer does not seek properly. Instead, always seek
back, hopefully some more.
Instead of trying to adjust the backstep seek target by a random value
of 1.0 seconds. Instead, always rely on the random value provided by the
user via --demuxer-backward-playback-step. If the demuxer should really
get "stuck" and somehow miss the seek target badly, or the user sets the
option value to 0, then the demuxer will not make any progress and just
eat CPU. (Although due to backward seek semantics used for backstep
seeks, even a very small seek step size will work. Just not 0.)
It seems this also fixes backstepping correctly when the initial seek
ended at the last keyframe range. (The explanation above was about the
case when it ends at EOF. These two cases are different. In the former,
you just need to step to the previous keyframe range, which was broken
because it didn't always react correctly to reaching EOF. In the latter,
you need to do a separate search for the last keyframe.)
Simple enough to do. May have mixed results. Typically, bitmap subtitles
will have a tight bounding box around the rendered text. But if for
example there is text on the top and bottom, it may be a single big
bitmap with a large transparent area between top and bottom. In
particular, DVD subtitles are really just a single screen-sized
RLE-encoded bitmap, though libavcodec will crop off transparent areas.
Like with sd_ass, you can't move subtitles _down_ if they are already in
their origin position. This could probably be improved, but I don't want
to deal with that right now.
Not specifying a --start or using --start=100% with
--play-direction=backward usually does not work. The demuxer gets no
packets and immediately enters EOF state, which then hangs because
backward playback mode neither considers this mode, nor propagates the
EOF.
As far as demuxer implementations are concerned, this behavior is OK and
even wanted. Seeking near the end with SEEK_FORWARD set is allowed not
to return any packets (so a normal relative forward seek as done by the
user would end playback). Seeking exactly to the end or past it without
SEEK_FORWARD set is probably also sane.
Another vaguely related issue is that a backward seek during playback
start does not "establish" the demux position correctly: if stream A
hits the next keyframe and seeks back, while stream B has not had a
chance to read a packet yet, then stream B will never try to read from
the old position. The effect is that stream B (and thus playback) will
effectively miss the seek target. This is "random" because it depends on
the order and number of packet read calls made by the decoders.
Fixing this is probably hard, and requires extending the already complex
state machine with more states, so turn the manpage into a TODO list for
now.
Raw audio formats can be accessed sample-wise, and logically audio
packets demuxed from it would contain only 1 sample. This is
inefficient, so raw audio demuxers typically "bundle" multiple samples
in one packet.
The problem for the demuxer cache and backward playback is that they
need properly aligned packets to make seeking "deterministic". The
requirement is that if you read some packets, and then seek back, you
eventually see the same packets again. demux_raw basically allowed to
seek into the middle of a previously returned packet, which makes it
impossible to make the transition seamless. (Unless you'd be aware of
the packet data format and cut them to make it seamless, which is too
complex for such a use case.)
Solve this by always aligning seeks to packet boundaries. This reduces
the seek accuracy to the arbitrarily chosen packet size. But you can use
hr-seek to fix this. The gain from not making raw audio an awful special
case pays in exchange for this "stupid" suggestion to use hr-seek.
It appears this also fixes that it could and did seek into the middle of
the frame (not sure if this code was ever tested - it goes back to
removing the code duplication between the former demux_rawaudio.c and
demux_rawvideo.c).
If you really cared, you could introduce a seek flag that controls
whether the seek is aligned or not. Then code which requires
"deterministic" demuxing could set it. But this isn't really useful for
us, and we'd always set the flag anyway, unless maybe the caching were
forced disabled.
libavformat's wav demuxer exhibits the same issue. We can't fix it (it
would require the unpleasant experience of contributing to FFmpeg), so
document this in otions.rst. In theory, this also affects seek range
joining, but the only bad effect should be that cached data is
discarded.
See manpage additions. This is a huge hack. You can bet there are shit
tons of bugs. It's literally forcing square pegs into round holes.
Hopefully, the manpage wall of text makes it clear enough that the whole
shit can easily crash and burn. (Although it shouldn't literally crash.
That would be a bug. It possibly _could_ start a fire by entering some
sort of endless loop, not a literal one, just something where it tries
to do work without making progress.)
(Some obvious bugs I simply ignored for this initial version, but
there's a number of potential bugs I can't even imagine. Normal playback
should remain completely unaffected, though.)
How this works is also described in the manpage. Basically, we demux in
reverse, then we decode in reverse, then we render in reverse.
The decoding part is the simplest: just reorder the decoder output. This
weirdly integrates with the timeline/ordered chapter code, which also
has special requirements on feeding the packets to the decoder in a
non-straightforward way (it doesn't conflict, although a bugmessmass
breaks correct slicing of segments, so EDL/ordered chapter playback is
broken in backward direction).
Backward demuxing is pretty involved. In theory, it could be much
easier: simply iterating the usual demuxer output backward. But this
just doesn't fit into our code, so there's a cthulhu nightmare of shit.
To be specific, each stream (audio, video) is reversed separately. At
least this means we can do backward playback within cached content (for
example, you could play backwards in a live stream; on that note, it
disables prefetching, which would lead to losing new live video, but
this could be avoided).
The fuckmess also meant that I didn't bother trying to support
subtitles. Subtitles are a problem because they're "sparse" streams.
They need to be "passively" demuxed: you don't try to read a subtitle
packet, you demux audio and video, and then look whether there was a
subtitle packet. This means to get subtitles for a time range, you need
to know that you demuxed video and audio over this range, which becomes
pretty messy when you demux audio and video backwards separately.
Backward display is the most weird (and potentially buggy) part. To
avoid that we need to touch a LOT of timing code, we negate all
timestamps. The basic idea is that due to the navigation, all
comparisons and subtractions of timestamps keep working, and you don't
need to touch every single of them to "reverse" them.
E.g.:
bool before = pts_a < pts_b;
would need to be:
bool before = forward
? pts_a < pts_b
: pts_a > pts_b;
or:
bool before = pts_a * dir < pts_b * dir;
or if you, as it's implemented now, just do this after decoding:
pts_a *= dir;
pts_b *= dir;
and then in the normal timing/renderer code:
bool before = pts_a < pts_b;
Consequently, we don't need many changes in the latter code. But some
assumptions inhererently true for forward playback may have been broken
anyway. What is mainly needed is fixing places where values are passed
between positive and negative "domains". For example, seeking and
timestamp user display always uses positive timestamps. The main mess is
that it's not obvious which domain a given variable should or does use.
Well, in my tests with a single file, it suddenly started to work when I
did this. I'm honestly surprised that it did, and that I didn't have to
change a single line in the timing code past decoder (just something
minor to make external/cached text subtitles display). I committed it
immediately while avoiding thinking about it. But there really likely
are subtle problems of all sorts.
As far as I'm aware, gstreamer also supports backward playback. When I
looked at this years ago, I couldn't find a way to actually try this,
and I didn't revisit it now. Back then I also read talk slides from the
person who implemented it, and I'm not sure if and which ideas I might
have taken from it. It's possible that the timestamp reversal is
inspired by it, but I didn't check. (I think it claimed that it could
avoid large changes by changing a sign?)
VapourSynth has some sort of reverse function, which provides a backward
view on a video. The function itself is trivial to implement, as
VapourSynth aims to provide random access to video by frame numbers (so
you just request decreasing frame numbers). From what I remember, it
wasn't exactly fluid, but it worked. It's implemented by creating an
index, and seeking to the target on demand, and a bunch of caching. mpv
could use it, but it would either require using VapourSynth as demuxer
and decoder for everything, or replacing the current file every time
something is supposed to be played backwards.
FFmpeg's libavfilter has reversal filters for audio and video. These
require buffering the entire media data of the file, and don't really
fit into mpv's architecture. It could be used by playing a libavfilter
graph that also demuxes, but that's like VapourSynth but worse.
The ytdl wrapper can resolve web links to playlists. This playlist is
passed as big memory:// blob, and will contain further quite normal web
links. When playback of one of these playlist entries starts, ytdl is
called again and will resolve the web link to a media URL again.
This didn't work if playlist entries resolved to EDL URLs. Playback was
rejected with a "potentially unsafe URL from playlist" error. This was
completely weird and unexpected: using the playlist entry directly on
the command line worked fine, and there isn't a reason why it should be
different for a playlist entry (both are resolved by the ytdl wrapper
anyway). Also, if the only EDL URL was added via audio-add or sub-add,
the URL was accessed successfully.
The reason this happened is because the playlist entries were marked as
STREAM_SAFE_ONLY, and edl:// is not marked as "safe". Playlist entries
passed via command line directly are not marked, so resolving them to
EDL worked.
Fix this by making the ytdl hook set load-unsafe-playlists while the
playlist is parsed. (After the playlist is parsed, and before the first
playlist entry is played, file-local options are reset again.) Further,
extend the load-unsafe-playlists option so that the playlist entries are
not marked while the playlist is loaded.
Since playlist entries are already verified, this should change nothing
about the actual security situation.
There are now 2 locations which check load_unsafe_playlists. The old one
is a bit redundant now. In theory, the playlist loading code might not
be the only code which sets these flags, so keeping the old code is
somewhat justified (and in any case it doesn't hurt to keep it).
In general, the security concept sucks (and always did). I can for
example not answer the question whether you can "break" this mechanism
with various combinations of archives, EDL files, playlists files,
compromised sites, and so on. You probably can, and I'm fully aware that
it's probably possible, so don't blame me.
Originally, vo_gpu/vo_opengl considered the case of Nvidia proprietary
drivers, which required vdpau/GLX, and Intel open source drivers, which
require vaapi/EGL. Since window creation and GPU context creation are
inseparable in mpv's internal API, it had to pick the correct API very
early, or hardware decoding wouldn't work. "x11probe" was introduced for
this reason. It created a GLX context (without showing the window yet),
and checked whether vdpau was available. If yes, it used GLX, if not, it
continued probing x11/EGL. (Obviously it couldn't always fail on GLX
without vdpau, which is why it was a separate "probe" backend.)
Years passed, and now the situation is different. Vdpau is dead. Nvidia
drivers and libavcodec now provide CUDA interop, which requires EGL, and
fixes some of the vdpau problems. AMD drivers now provide vaapi, which
generally works better than vdpau. Intel didn't change.
In particular, vaapi provides working HEVC Main10 support. In theory, it
should work on vdpau too, with quality reduction (no 10 bit surfaces),
but I couldn't get it to work.
So always prefer EGL. And suddenly hardware decoding works. This is
actually rather important, because HEVC is unfortunately on the rise,
despite shitty encoders and unoptimized decoders. The latter may mean
that hardware decoding works better than libavcodec.
This should have been done a long, long time ago.
The "program" property could switch between TS programs. It was rather
complex and rather obscure (even if you deal with TS captures, you
usually don't need it). If anyone actually needs it (did anyone ever
attempt to even use it?), it should be rewritten. The demuxer should
export a program list, and the frontend should handle the "cycling"
logic.
Linux analog TV support (via tv://) was excessively complex, and
whenever I attempted to use it (cameras or loopback devices), it didn't
work well, or would have required some major work to update it. It's
very much stuck in the analog past (my favorite are the frequency tables
in frequencies.c for analog TV channels which don't exist anymore).
Especially cameras and such work fine with libavdevice and better than
tv://, for example:
mpv av://v4l2:/dev/video0
(adding --profile=low-latency --untimed even makes it mostly realtime)
Adding a new input layer that targets such "modern" uses would be
acceptable, if anyone is interested in it. The old TV code is just too
focused on actual analog TV.
DVB is rather obscure, but has an active maintainer, so don't remove it.
However, the demux/stream ctrl layer must go, so remove controls for
channel switching. Most of these could be reimplemented by using the
normal method for option runtime changes.
This removes anything related to DVD/BD/CD that negatively affected the
core code. It includes trying to rewrite timestamps (since DVDs and
Blurays do not set packet stream timestamps to playback time, and can
even have resets mid-stream), export of chapters, stream languages,
export of title/track lists, and all that.
Only basic seeking is supported. It is very much possible that seeking
completely fails on some discs (on some parts of the timeline), because
timestamp rewriting was removed.
Note that I don't give a shit about optical media. If you want to watch
them, rip them. Keeping some bare support for DVD/BD is the most I'm
going to do to appease the type of lazy, obnoxious users who will care.
There are other players which are better at optical discs.
stream_dvd.c contained large amounts of ancient, unmaintained code,
which has been historically moved to libdvdnav. Basically, it's full of
low level parsing of DVD on-disc structures.
Kill it for good. Users can use the remaining dvdnav support (which
basically operates in non-menu mode). Users have reported that
libdvdread sometimes works better, but this is just libdvdnav's problem
and not ours.
This is a straightforward parallel implementation of error diffusion
algorithms in compute shader. Basically we use single work group with
maximal possible size to process the whole image. After a shift
mapping we are able to process all pixels column by column.
A large ring buffer are allocated in shared memory to speed things up.
However the size of required shared memory depends linearly on the
height of video window (or screen height in fullscreen mode). In case
there is no enough shared memory, it will fallback to `--dither=fruit`.
The maximal allowed work group size is hardcoded as 1024. Ideally we
could query `GL_MAX_COMPUTE_WORK_GROUP_INVOCATIONS`. But for whatever
reason, it seems most high end card from nvidia and amd support only
the minimal required value, so I guess we can stick to it for now.
I assume (but cannot confirm) that VA-AP-API is in fact a typo, because
most if not all search engine results related to it are from mpv's manual
page.
By changing this to VA-API and clarifying that this requires VA-API support
on a system to use it, we can hopefully make it clear to unsuspecting
Windows users that this is not the filter they're looking for.
Concerns #6690.
This allows to select the drm mode using a string specification. You
can either select the the preferred mode, the mode with the highest
resolution, by specifying WxH[@R] or by its index in the list of modes
as before.
This was implemented by using OPT_STRING_VALIDATE for drm-mode,
instead of OPT_INT. Using a string here also prepares for future
additions to drm-mode that aim to allow specifying a mode by its
resolution.
It is useful when debugging to be able to force atomic off, or as a
workaround if atomic breaks for some user. Legacy modesetting is less
likely to break by virtue of being a less complex API.
half of the materials we used were deprecated with macOS 10.14, broken
and not supported by run time changes of the macOS theme. furthermore
our styling names were completely inconsistent with the actually look
since macOS 10.14, eg ultradark got a lot brighter and couldn't be
considered ultradark anymore.
i decided to drop the old option --macos-title-bar-style and rework
the whole mechanism to allow more freedom. now materials and appearance
can be set separately. even if apple changes the look or semantics in
the future the new options can be easily adapted.
Manual changes done:
* Merged the interface-changes under the already master'd changes.
* Moved the hwdec-related option changes to video/decode/vd_lavc.c.
Rather than the linear cd/m^2 units, these (relative) logarithmic units
lend themselves much better to actually detecting scene changes,
especially since the scene averaging was changed to also work
logarithmically.
In theory our "eye adaptation" algorithm works in both ways, both
darkening bright scenes and brightening dark scenes. But I've always
just prevented the latter with a hard clamp, since I wanted to avoid
blowing up dark scenes into looking funny (and full of noise).
But allowing a tiny bit of over-exposure might be a good thing. I won't
change the default just yet (better let users test), but a moderate
value of 1.2 might be better than the current 1.0 limit. Needs testing
especially on dark scenes.
The previous approach of using an FIR with tunable hard threshold for
scene changes had several problems:
- the FIR involved annoying hard-coded buffer sizes, high VRAM usage,
and the FIR sum was prone to numerical overflow which limited the
number of frames we could average over. We also totally redesign the
scene change detection.
- the hard scene change detection was prone to both false positives and
false negatives, each with their own (annoying) issues.
Scrap this entirely and switch to a dual approach of using a simple
single-pole IIR low pass filter to smooth out noise, while using a
softer scene change curve (with tunable low and high thresholds), based
on `smoothstep`. The IIR filter is extremely simple in its
implementation and has an arbitrarily user-tunable cutoff frequency,
while the smoothstep-based scene change curve provides a good, tunable
tradeoff between adaptation speed and stability - without exhibiting
either of the traditional issues associated with the hard cutoff.
Another way to think about the new options is that the "low threshold"
provides a margin of error within which we don't care about small
fluctuations in the scene (which will therefore be smoothed out by the
IIR filter).
Instead of desaturating towards luma, we desaturate towards the
per-channel tone mapped version. This essentially proves a smooth
roll-off towards the "hollywood"-style (non-chromatic) tone mapping
algorithm, which works better for bright content, while continuing to
use the "linear" style (chromatic) tone mapping algorithm for primarily
in-gamut content.
We also split up the desaturation algorithm into strength and exponent,
which allows users to use less aggressive desaturation settings without
affecting the overall curve.
Too many broken hardware decoders. Noticed wrong decoding of a video
file encoded with x262 on RX Vega when using VAAPI (Mesa 18.3.2).
Looks fine with swdec and a cheap hardware BD player.
Reverts 017f3d0674
--record-file is nice, but only sometimes. If you watch some sort of
livestream which you want to record, it's actually much nicer not to
record what you're currently "seeing", but anything you're receiving.
This option has been deprecated upstream for a long time, probably
doesn't even work anymore, and won't work moving forwards as we replace
the vulkan code by libplacebo wrappers.
I haven't removed the option completely yet since in theory we could
still add support for e.g. a native glslang wrapper in the future. But
most likely the future of this code is deletion.
As an aside, fix an issue where the man page didn't mention d3d11.
This commit bumps the libmpv version to 1.102
drm-osd-plane -> drm-draw-plane
drm-video-plane -> drm-drmprime-video-plane
drm-osd-size -> drm-draw-surface-size
"draw plane", as in the plane that OpenGL draws to, whether it be
video + OSD or just OSD.
"drmprime video plane", as in the plane used for hwdec video imported
via drmprime.
"draw surface size", as in the size of the surface used for the draw plane
The new names are invariant whether or not hwdec_drmprime_drm is being
used or not. The original naming was very confusing, as when doing
regular rendering (swdec or vaapi) the video would be displayed on the
"OSD plane", and the "Video plane" would remain unused.
Add general primary/overlay plane option to drm-osd-plane-id and
drm-video-plane-id, so that the user can just request any usable
primary or overlay plane for either of these two options. This should
be somewhat more user-friendly (especially as neither of these two
options currently have a useful help function), as usually you would
only be interested in the type of the plane, and not exactly which
plane gets picked.
Despite their place in the tree, hwdecs can be loaded and used just
fine by the vulkan GPU backend.
In this change we add Vulkan interop support to the cuda/nvdec hwdec.
The overall process is mostly straight forward, so the main observation
here is that I had to implement it using an intermediate Vulkan buffer
because the direct VkImage usage is blocked by a bug in the nvidia
driver. When that gets fixed, I will revist this.
Nevertheless, the intermediate buffer copy is very cheap as it's all
device memory from start to finish. Overall CPU utilisiation is pretty
much the same as with the OpenGL GPU backend.
Note that we cannot use a single intermediate buffer - rather there
is a pool of them. This is done because the cuda memcpys are not
explicitly synchronised with the texture uploads.
In the basic case, this doesn't matter because the hwdec is not
asked to map and copy the next frame until after the previous one
is rendered. In the interpolation case, we need extra future frames
available immediately, so we'll be asked to map/copy those frames
and vulkan will be asked to render them. So far, harmless right? No.
All the vulkan rendering, including the upload steps, are batched
together and end up running very asynchronously from the CUDA copies.
The end result is that all the copies happen one after another, and
only then do the uploads happen, which means all textures are uploaded
the same, final, frame data. Whoops. Unsurprisingly this results in
the jerky motion because every 3/4 frames are identical.
The buffer pool ensures that we do not overwrite a buffer that is
still waiting to be uploaded. The ra_buf_pool implementation
automatically checks if existing buffers are available for use and
only creates a new one if it really has to. It's hard to say for sure
what the maximum number of buffers might be but we believe it won't
be so large as to make this strategy unusable. The highest I've seen
is 12 when using interpolation with tscale=bicubic.
A future optimisation here is to synchronise the CUDA copies with
respect to the vulkan uploads. This can be done with shared semaphores
that would ensure the copy of the second frames only happens after the
upload of the first frame, and so on. This isn't trivial to implement
as I'd have to first adjust the hwdec code to use asynchronous cuda;
without that, there's no way to use the semaphore for synchronisation.
This should result in fewer intermediate buffers being required.
Since linear downscaling makes sense to handle independently from
linear/sigmoid upscaling, we split this option up. Now,
linear-downscaling is its own option that only controls linearization
when downscaling and nothing more. Likewise, linear-upscaling /
sigmoid-upscaling are two mutually exclusive options (the latter
overriding the former) that apply only to upscaling and no longer
implicitly enable linear light downscaling as well.
The old behavior was very confusing, as evidenced by issues such
as #6213. The current behavior should make much more sense, and only
minimally breaks backwards compatibility (since using linear-scaling
directly was very uncommon - most users got this for free as part of
gpu-hq and relied only on that).
Closes#6213.
Someone on IRC pointed out that the default stats bindings weren't
documented in the interactive control section of the manual, so
let's add them with a short mention and a reference to the STATS
section of the manual.
by default the pixel format creation falls back to software renderer
when everything fails. this is mostly needed for VMs. additionally one
can directly request an sw renderer or exclude it entirely.
The demuxer cache is the only cache now. Might need another change to
combat seeking failures in mp4 etc. The only bad thing is the loss of
cache-speed, which was sort of nice to have.
duration is parsed as an integer, and the default value is used if ```-1``` is passed. Passing ```-``` as described here causes a parameter value error.
The only effective difference is that the former explicitly checks
whether the JSON value type is string, and errors out if not. The rest
is exactly the same (mpv_set_property_string is mpv_set_property with
MPV_FORMAT_STRING).
It seems silly to keep this, so just remove it.
Until now, stopping playback aborted the demuxer and I/O layer violently
by signaling mp_cancel (bound to libavformat's AVIOInterruptCB
mechanism). Change it to try closing them gracefully.
The main purpose is to silence those libavformat errors that happen when
you request termination. Most of libavformat barely cares about the
termination mechanism (AVIOInterruptCB), and essentially it's like the
network connection is abruptly severed, or file I/O suddenly returns I/O
errors. There were issues with dumb TLS warnings, parsers complaining
about incomplete data, and some special protocols that require server
communication to gracefully disconnect.
We still want to abort it forcefully if it refuses to terminate on its
own, so a timeout is required. Users can set the timeout to 0, which
should give them the old behavior.
This also removes the old mechanism that treats certain commands (like
"quit") specially, and tries to terminate the demuxers even if the core
is currently frozen. This is for situations where the core synchronized
to the demuxer or stream layer while network is unresponsive. This in
turn can only happen due to the "program" or "cache-size" properties in
the current code (see one of the previous commits). Also, the old
mechanism doesn't fit particularly well with the new one. We wouldn't
want to abort playback immediately on a "quit" command - the new code is
all about giving it a chance to end it gracefully. We'd need some sort
of watchdog thread or something equally complicated to handle this. So
just remove it.
The change in osd.c is to prevent that it clears the status line while
waiting for termination. The normal status line code doesn't output
anything useful at this point, and the code path taken clears it, both
of which is an annoying behavior change, so just let it show the old
one.
Before this change, only 1 command or so had named arguments. There is
no reason why other commands can't have them, except that it's a bit of
work to add them.
Commands with variable number of arguments are inherently incompatible
to named arguments, such as the "run" command. They still have dummy
names, but obviously you can't assign multiple values to a single named
argument (unless the argument has an array type, which would be
something different). For now, disallow using named argument APIs with
these commands. This might change later.
2 commands are adjusted to not need a separate default value by changing
flag constants. (The numeric values are C only and can't be set by
users.)
Make the command syntax in the manpage more consistent. Now none of the
allowed choice/flag names are in the command header, and all arguments
are shown with their proper name and quoted with <...>.
Some places in the manpage and the client.h doxygen are updated to
reflect that most commands support named arguments. In addition, try to
improve the documentation of the syntax and need for escaping etc. as
well.
(Or actually most uses of the word "argument" should be "parameter".)
This affects async commands started by client API, commands with async
capability run in a sync way by client API (think mpv_command_node()
with "subprocess"), and detached async work.
Since scripts might want to do some cleanup work (that might involve
launching processes, don't ask), we don't unconditionally kill
everything on exit, but apply an arbitrary timeout of 2 seconds until
async commands are aborted.
I wanted to put all commands through mpv_command_node_async() instead of
mpv_command_node(). Using synchronous commands over a synchronous
transport doesn't make sense anyway.
This would have used the request_id field in IPC requests as reply ID
for the async commands. But the latter need to be [u]int64, while the
former can be any type. To avoid that we need an extra lookup table for
mapping reply IDs to request_id values, we now require that request_id
fields are integers.
Since this would be an incompatible change, just deprecate non-integers
for now, and plan the change for a later time.
The only effective difference is that the former explicitly checks
whether the JSON value type is string, and errors out if not. The rest
is exactly the same (mpv_set_property_string is mpv_set_property with
MPV_FORMAT_STRING).
It seems silly to keep this, so just remove it.
The "run" command is old. I'm not sure why the separate Lua
implementation was added. But maybe it as because the "run" command used
to be limited to a small number of arguments. This limit has been
removed a while ago. In any case, the old implementation is not needed
anymore.
We keep mp.subprocess() with roughly the same semantics for
compatibility with scripts (including the internal ytdl script).
Seems to work with rhe ytdl wrapper. Not tested further.
This supports named arguments. It benefits from the infrastructure of
async commands.
The plan is to reimplement Lua's utils.subprocess() on top of it.
Named arguments should make it easier to have long time compatibility,
even if command arguments get added or removed. They're also much nicer
for commands with a large number of arguments, especially if many
arguments are optional.
As of this commit, this can not be used, because there is no command yet
which supports them. See the following commit.
Basically reimplement the async behavior on top of the async command
code. With this, all screenshot commands are async, and the "async"
prefix basically does nothing. The prefix now behaves exactly like with
other commands that use spawn_thread.
This also means using the prefix in the preset input.conf is pointless
(without effect) and misleading, so remove that.
The each_frame mode was actually particularly painful in making this
change, since the player wants to block for it when writing a
screenshot, and generally doesn't fit into the new infrastructure. It
was still relatively easy to reimplement by copying the original command
and then repeating it on each frame. The waiting is reentrant now, so
move the call in video.c to a "safer" spot.
One way to observe how the new semantics interact with everything is
using the mpv repl script and sending a screenshot command through it.
Without async flag, the script will freeze while writing the screenshot
(while playback continues), while with async flag it continues.
Pretty trivial, since commands can be async now, and the common code
even provides convenience like running commands on a worker thread.
The only ugly thing is that mp_add_external_file() needs an extra flag
for locking. This is because there's still some code which calls this
synchronously from the main thread, and unlocking the core makes no
sense there.
This enables two types of command behavior:
1. Plain async behavior, like "loadfile" not completing until the file
is fully loaded.
2. Running parts of the command on worker threads, e.g. for I/O, such as
"sub-add" doing network accesses on a thread while the core
continues.
Both have no implementation yet, and most new code is actually inactive.
The plan is to implement a number of useful cases in the following
commits.
The most tricky part is handling internal keybindings (input.conf) and
the multi-command feature (concatenating commands with ";"). It requires
a bunch of roundabout code to make it do the expected thing in
combination with async commands.
There is the question how commands should be handled that come in at a
higher rate than what can be handled by the core. Currently, it will
simply queue up input.conf commands as long as memory lasts. The client
API is limited by the size of the reply queue per client. For commands
which require a worker thread, the thread pool is limited to 30 threads,
and then will queue up work in memory. The number is completely
arbitrary.
With the advent of actual HDR devices, my real measured ICC profile has
an "infinite" contrast, since the display is completely off on pure
black inputs. 100k:1 might not be enough, so let's just bump it up to
1m:1 to be safe.
Also, improve the logging in the case that the detected contrast is too
high by default.
With the internal change from stringlist to keyvaluelist, these
sub-options stop working. I don't really care enough to bring them
back. (Order doesn't matter, -del always seemed annoying.)
We are currently using primary / overlay planes drm objects, assuming that primary plane is osd and overlay plane is video.
This commit is doing two things :
- replace the primary / overlay planes members with osd and video planes member without the assumption
- Add two more options to determine which one of the primary / overlay is associated to osd / video.
- It will default osd to overlay and video to primary if unspecified
That new API was introduced and allows to have several native resources.
Thisuses that mechanisma for drm resources rather than the deprecated
opengl-cb structs.
This patch therefore add two structs that can be used with the drm atomic interop.
- mpv_opengl_drm_params : which will hold all the drm handles
- mpv_opengl_drm_osd_size : which will hold osd layer size
This commit adds a drm-osd-size=WxH parameter to commandline which
allows to define the OSD plane dimension. OSD can be upscaled to
screen resolution when having OSD at video resolution is too heavy.
This is especially useful for UHD modes on embedded devices where
the GPU cannot handle UHD modes at a decent framerate.
Instead of using an internal counter to keep track of the value that was
set last, attempt to find the current value of the property/option in
the value list, and then set the next value in the list.
There are some potential problems. If a property refuses to accept a
specific value, the cycle-values command will fail, and start from the
same position again. It can't know that it's supposed to skip the next
value. The same can happen to properties which behave "strangely", such
as the "aspect" property, which will return the current aspect if you
write "-1" to it. As a consequence, cycle-values can appear to get
"stuck".
I still think the new behavior is what users expect more, and which is
generally more useful. We won't restore the ability to get the old
behavior, unless we decide to revert this commit entirely.
Fixes#5772, and hopefully other complaints.
The main change is that we wait with opening the muxer ("writing
headers") until we have data from all streams. This fixes race
conditions at init due to broken assumptions in the old code.
This also changes a lot of other stuff. I found and fixed a few API
violations (often things for which better mechanisms were invented, and
the old ones are not valid anymore). I try to get away from the public
mutex and shared fields in encode_lavc_context. For now it's still
needed for some timestamp-related fields, but most are gone. It also
removes some bad code duplication between audio and video paths.
Fundamentally, scripts are loaded asynchronously, but as a feature,
there was code to wait until a script is loaded (for a certain arbitrary
definition of "loaded"). This was done in scripting.c with the
wait_loaded() function.
This called mp_idle(), and since there are commands to load/unload
scripts, it meant the player core loop could be entered recursively. I
think this is a major complication and has some problems. For example,
if you had a script that does 'os.execute("sleep inf")', then every time
you ran a command to load an instance of the script would add a new
stack frame of mp_idle(). This would lead to some sort of reentrancy
horror that is hard to debug. Also misc/dispatch.c contains a somewhat
tricky mess to support such recursive invocations. There were also some
bugs due to this and due to unforeseen interactions with other messes.
This scripting stuff was the only thing making use of that reentrancy,
and future commands that have "logical" waiting for something should be
implemented differently. So get rid of it.
Change the code to wait only in the player initialization phase: the
only place where it really has to wait is before playback is started,
because scripts might want to set options or hooks that interact with
playback initialization. Unloading of builtin scripts (can happen with
e.g. "set osc no") is left asynchronous; the unloading wasn't too robust
anyway, and this change won't make a difference if someone is trying to
break it intentionally. Note that this is not in mp_initialize(),
because mpv_initialize() uses this by locking the core, which would have
the same problem.
In the future, commands which logically wait should use different
mechanisms. Originally I thought the current approach (that is removed
with this commit) should be used, but it's too much of a mess and can't
even be used in some cases. Examples are:
- "loadfile" should be made blocking (needs to run the normal player
code and manually unblock the thread issuing the command)
- "add-sub" should not freeze the player until the URL is opened (needs
to run opening on a separate thread)
Possibly the current scripting behavior could be restored once new
mechanisms exist, and if it turns out that anyone needs it.
With this commit there should be no further instances of recursive
playloop invocations (other than the case in the following commit),
since all mp_idle()/mp_wait_events() calls are done strictly from the
main thread (and not commands/properties or libmpv client API that
"lock" the main thread).
Until recently, the AO was reinitialized strictly only on decoder format
changes. But the commit for simplifying audio format negotiation removed
this. Now the AO is recreated for any format change.
This is sort of annoying if you change playback speed. The
insertion/removal of af_scaletempo can change the sample format. For
example, the acompressor filter will convert output to double, so
toggling scaletempo will force the format back to float. This recreates
the AO under the --gapless-audio=weak default. This likely affects a lot
of other filters too.
Work this around by allowing sample format changes, and keeping the
current AO format in these cases. This is probably not a big problem.
Most audio APIs force the output format to float anyway.
This means you actually have to worry about what the default gapless
mode does to your audio. If you start with a file that uses 8 bit per
sample, and then continue playing a 24 bit FLAC, it will be converted
down to 8 bit per sample. (Assuming they are played in a way that uses
the gapless logic.)
One can now set the number of buffers and the buffer size.
This can reduce the CPU usage and the total latency stays mostly the same.
As there are sync mechanisms the A/V sync continue intact and working.
It also modifies 6.1 channel order, as per OpenAL spec
and add AOPLAY_FINAL_CHUNK support
Uses OpenAL Soft's AL_DIRECT_CHANNELS_SOFT extension and can be controlled through
a new CLI option, --openal-direct-channels.
This allows one to send the audio data direrctly to the desired channel without
effects applied.
Due to earlier misinterpretation of the Lua docs as if mp.register_idle
registers a one-shot callback, the JS docs suggested to use setTimeout.
But the behavior and Lua docs are such that it's a repeating callback
which fires just before the script thread goes to sleep.
Implement it for JS too.
As it turns out, there are multiple libmpv users who saw a need to
use the hook API. The API is kind of shitty and was never meant to be
actually public (it was mostly a hack for the ytdl script).
Introduce a proper API and deprecate the old one. The old one will
probably continue to work for a few releases, but will be removed
eventually.
There are some slight changes to the old API, but if a user followed
the manual properly, it won't break.
Mostly untested. Appears to work with ytdl_hook.
This adds key bindings for some semi-popular features. It also tries to
cleanup some old bindings. For example w/e for panscan is now changed to
w/W. In all cases, the old bindings are still kept and work, though.
Part of an ongoing attempt to cleanup the default key bindings.
See #973 for some context.
The playback start logic explicitly waits until the first frame has been
displayed. Usually this will introduce a wait of 1 vsync. For normal
playback this doesn't matter, but with respect to low latency needs,
this only leads to additional data getting queued up in the demuxer or
network buffers.
Another thing is that the timing logic decodes 1 frame ahead (= 1 frame
extra latency) to determine the exact duration of a frame.
To be fair, there doesn't really seem to be a hard reason why this is
needed. With the current code, enabling the option does lead to A/V
desync sometimes (if the demuxer FPS is too inaccurate), and also frame
drops at playback start in some situations. But this all seems to be
avoidable, if the timing logic were to be rewritten completely, which
should probably happen in the future. Thus the new option comes with the
warning that it can be removed any time. This is also why the option has
"hack" in the name.
Well I guess it doesn't help that much.
Also add some stuff that might help to the manpage.
The fundamental problem with some "live" sources (e.g. x11grab) is
actually that the player gets behind initially, and never thinks it has
to catch up. This is also why --untimed can help.
The purpose of the new API is to make it useable with other APIs than
OpenGL, especially D3D11 and vulkan. In theory it's now possible to
support other vo_gpu backends, as well as backends that don't use the
vo_gpu code at all.
This also aims to get rid of the dumb mpv_get_sub_api() function. The
life cycle of the new mpv_render_context is a bit different from
mpv_opengl_cb_context, and you explicitly create/destroy the new
context, instead of calling init/uninit on an object returned by
mpv_get_sub_api().
In other to make the render API generic, it's annoyingly EGL style, and
requires you to pass in API-specific objects to generic functions. This
is to avoid explicit objects like the internal ra API has, because that
sounds more complicated and annoying for an API that's supposed to never
change.
The opengl_cb API will continue to exist for a bit longer, but
internally there are already a few tradeoffs, like reduced
thread-safety.
Mostly untested. Seems to work fine with mpc-qt.
the title bar is now within the window bounds instead of outside. same
as QuickTime Player. it supports several standard styles, two dark and
two light ones. additionally we have properly rounded corners now and
the borderless window also has the proper window shadow.
Also make the earliest supported macOS version 10.10.
Fixes#4789, #3944
This introduces the option --drm-format (currently used only by
context_drm_egl, vo_drm implementation is pending) which allows you to
pick between a xrgb8888 or a xrgb2101010 visual for --gpu-context=drm.
Requires a recent mesa (18.0.0_rc4 or later) to work.
This also fixes a bug when using --gpu-context=drm on a 30bpp-enabled
mesa (allow_rgb10_configs set to true). Previously it would've set up
an XRGB8888 format at the DRM/GBM level, while a 30bpp EGLConfig would
be picked, resulting in a garbled image.
Do this because retrying reading on higher levels (like the demuxer)
usually causes tons of problems. A hack like this is simpler and could
allow to remove some of the higher level retry behavior.
This works by trying to detect whether the file is appended. If we reach
EOF, check if the file size changed compared to the initial value. If it
did, it means the file was appended at least once, and we set the
p->appending flag. If that flag is set, we simply retry reading more
data every time we encounter EOF. The only way to do this is polling,
and we poll for at most 10 times, after waiting for 200ms every time.
This solves a number of problems simultaneously:
1. When outputting HLG, this allows tuning the OOTF based on the display
characteristics.
2. When outputting PQ or other HDR curves, this allows soft-limiting the
output brightness using the tone mapping algorithm.
3. When outputting SDR, this allows HDR-in-SDR style output, by
controlling the output brightness directly.
Closes#5521
Usable for uniquely identifying mpv instances from
subprocesses, controlling mpv with AppleScript, ...
Adds a new mp_getpid() wrapper for cross-platform reasons.
This switches the default away from "bob" to the best algorithm reported
as supported by the driver. This is convenient for users, and there is
no reason to use something worse by default.
Untested.
Before this, we made deinterlacing dependent on the video codec metadata
(AVFrame.interlaced_frame for libavcodec). So even if --deinterlace=yes
was set, we skipped deinterlacing if the flag wasn't set. This is very
unreliable and there are many streams with flags incorrectly set.
The potential problem is that this might upset people who alwase enabled
deinterlace and hoped it worked. But it's likely these people were
screwed by this setting anyway. The new behavior is less tricky and
easier to understand, and this preferable. Maybe one day we could
introduce a --deinterlace=auto, which does the right thing, but of
course this would be hard to implement (esecially with hwdec).
Fixes#5219.
this is meant to replace the old and not properly working vo_gpu/opengl
cocoa backend in the future. the problems are various shortcomings of
Apple's opengl implementation and buggy behaviour in certain
circumstances that couldn't be properly worked around. there are also
certain regressions on newer macOS versions from 10.11 onwards.
- awful opengl performance with a none layer backed context
- huge amount of dropped frames with an early context flush
- flickering of system elements like the dock or volume indicator
- double buffering not properly working with a none layer backed context
- bad performance in fullscreen because of system optimisations
all the problems were caused by using a normal opengl context, that
seems somewhat abandoned by apple, and are fixed by using a layer backed
opengl context instead. problems that couldn't be fixed could be
properly worked around.
this has all features our old backend has sans the wid embedding,
the possibility to disable the automatic GPU switching and taking
screenshots of the window content. the first was deemed unnecessary by
me for now, since i just use the libmpv API that others can use anyway.
second is technically not possible atm because we have to pre-allocate
our opengl context at a time the config isn't read yet, so we can't get
the needed property. third one is a bit tricky because of deadlocking
and it needed to be in sync, hopefully i can work around that in the
future.
this also has at least one additional feature or eye-candy. a properly
working fullscreen animation with the native fs. also since this is a
direct port of the old backend of the parts that could be used, though
with adaptions and improvements, this looks a lot cleaner and easier to
understand.
some credit goes to @pigoz for the initial swift build support which
i could improve upon.
Fixes: #5478, #5393, #5152, #5151, #4615, #4476, #3978, #3746, #3739,
#2392, #2217
early flushing only caused problems on macOS, which includes:
- performance problems and huge amount of dropped frames
- problems with playing back video files with fps close to the display
refresh rate
- rendering at twice the rate of the video fps
- not properly detected display refresh rate
we always deactivate any early flush for macOS to fix these problems.
Disable by default.
This feature was added in 7eb342757, which allowed stream selection
in runtime. Problem with this atm is that FFmpeg will try to demux
every first packet of every track leading to noticeable delay opening
the URL.
This option can be changed to enabled by default or removed when
HLS/DASH demuxers are improved upstream.
Using the GL renderer for color conversion will make sure screenshots
will use the same conversion as normal video rendering. It can do this
for all types of screenshots.
The logic when to write 16 bit PNGs changes. To approximate the old
behavior, we decide by looking whether the source video format has more
than 8 bits per component. We apply this logic even for window
screenshots. Also, 16 bit PNGs now always include an unused alpha
channel. The reason is that FFmpeg has RGB48 and RGBA64 formats, but no
RGB064. RGB48 is 3 bytes and usually not supported by GPUs for
rendering, so we have to use RGBA64, which forces an alpha channel.
Will break for users who use --target-trc and similar options.
I considered creating a new gl_video context, but it could double GPU
memory use, so I didn't.
This uses FBOs instead of glGetTexImage(), because that increases the
chance it could work on GLES (e.g. ANGLE). Untested. No support for the
Vulkan and D3D11 backends yet.
Fixes#5498. Also fixes#5240, because the code for reading back is not
used with the new code path.
The current peak detection algorithm was very bugged (which contributed
to the excessive cross-frame flicker without long normalization) and
also didn't take into account the frame average brightness level.
The new algorithm both takes into account frame average brightness (in
addition to peak brightness), and also computes the values in a more
stable/correct way. (The old path was basically undefined behavior)
In addition to improving the algorithm, we also switch to hable tone
mapping by default, and try to enable peak computation automatically
whever possible (compute shaders + SSBOs supported). We also make the
desaturation milder, after extensive testing during libplacebo
development.
I also had to compensate a bit for the representational differences
between mpv and libplacebo (libplacebo treats 1.0 as the reference peak,
but mpv treats it as the nominal peak), but it shouldn't have caused any
problems.
This is still not quite the same as libplacebo, since libplacebo also
allows tagging the desired scene average brightness on the output, and
it also supports reading the scene average brightness from static
metadata (MaxFALL) where available. But those changes are a bit more
involved. It's possible we could also read this from metadata in the
future, but we have problems communicating with AVFrames as it is and I
don't want to touch the mpv colorimetry structs for the time being.
Similar to the previous commit, and for the same reasons. Unlike with
af_scaletempo, resampling does not have a natural frame size, so we set
an arbitrary size limit on output frames. We add a new option to control
this size, although I'm not sure whether anyone will use it, so mark it
for testing only.
Note that we go through some effort to avoid buffering data in
libswresample itself. One reason is that we might have to reinitialize
the resampler completely when changing speed, which drops the buffered
data. Another is that I'm not sure whether the resampler will do the
right thing when applying dynamic speed changes.
MPlayer used this to distinguish multiple decoder wrappers (such as
libavcodec vs. binary codec loader vs. builtin decoders). It lost
meaning in mpv as non-libavcodec things were dropped. Now it doesn't
serve any purpose anymore.
Parsing was removed quite a while ago, and the recent filter change
removed any use of the internal family field. Get rid of it.
FFmpeg only suppports http proxies and ignores it if
the resulting url is https. Also, no SOCKS.
Use it like `--ytdl-raw-options=proxy=[http://127.0.0.1:3128]` so
it doesn't confuse mpv because of the colons.
You need to pass it as an option because youtube-dl doesn't give
us the proxy.
Or just set `http_proxy` environment variable as recommended before.
Added example using -append, which doesn't need escaping.
Get rid of the old vf.c code. Replace it with a generic filtering
framework, which can potentially handle more than just --vf. At least
reimplementing --af with this code is planned.
This changes some --vf semantics (including runtime behavior and the
"vf" command). The most important ones are listed in interface-changes.
vf_convert.c is renamed to f_swscale.c. It is now an internal filter
that can not be inserted by the user manually.
f_lavfi.c is a refactor of player/lavfi.c. The latter will be removed
once --lavfi-complex is reimplemented on top of f_lavfi.c. (which is
conceptually easy, but a big mess due to the data flow changes).
The existing filters are all changed heavily. The data flow of the new
filter framework is different. Especially EOF handling changes - EOF is
now a "frame" rather than a state, and must be passed through exactly
once.
Another major thing is that all filters must support dynamic format
changes. The filter reconfig() function goes away. (This sounds complex,
but since all filters need to handle EOF draining anyway, they can use
the same code, and it removes the mess with reconfig() having to predict
the output format, which completely breaks with libavfilter anyway.)
In addition, there is no automatic format negotiation or conversion.
libavfilter's primitive and insufficient API simply doesn't allow us to
do this in a reasonable way. Instead, filters can use f_autoconvert as
sub-filter, and tell it which formats they support. This filter will in
turn add actual conversion filters, such as f_swscale, to perform
necessary format changes.
vf_vapoursynth.c uses the same basic principle of operation as before,
but with worryingly different details in data flow. Still appears to
work.
The hardware deint filters (vf_vavpp.c, vf_d3d11vpp.c, vf_vdpaupp.c) are
heavily changed. Fortunately, they all used refqueue.c, which is for
sharing the data flow logic (especially for managing future/past
surfaces and such). It turns out it can be used to factor out most of
the data flow. Some of these filters accepted software input. Instead of
having ad-hoc upload code in each filter, surface upload is now
delegated to f_autoconvert, which can use f_hwupload to perform this.
Exporting VO capabilities is still a big mess (mp_stream_info stuff).
The D3D11 code drops the redundant image formats, and all code uses the
hw_subfmt (sw_format in FFmpeg) instead. Although that too seems to be a
big mess for now.
f_async_queue is unused.
Restores behaviour prior to aef2ed5dc1.
That change was apparently unpopular. However, given the amount of
complaining over how hard it is to change the defaults by rebinding every
key, I think the extra option introduced by this commit is justified.
Technically not all behaviour is restored, because now --no-osd-bar will
not instead display the msg text on seek. I think that feature was a
little weird and is now easy enough to remedy with the --osd-on-seek
option.
This reverts commit 9812e276aa.
This was apparently unpopular. I still think the pause OSD should be the
same as seek even if it's not visible by default, but it seems that
whether to display a given property change is currently conflated with
what to display.
The reverted behaviour can be restored by adding something like the
following to input.conf:
SPACE cycle pause; show_progress
Requested. See manpage additions.
The main reason why this goes through the trouble to keep the
action/operation parameter separate is so that we don't expose some
option parser implementation details to the command (although that is a
relatively weak reason), and also to make it more different from the
"set" command, which can't support this type of option as it goes
through the property layer.
Fixes#5435.
And use it for 2 demuxer options. It could be used for more options
later. (Though the --cache options can not use this, because they use KB
as base unit.)
This commit introduces the multiply-pitch af-command. Users may bind
keys to this command in order to incrementally adjust the pitch of a
track. This will probably mostly be useful for musicians trying to
transpose up and down by semi tones without having to calculate
the correct ratio beforehand.
As an example, here is an input.conf to test this feature:
{ af-command all multiply-pitch 0.9438743126816935
} af-command all multiply-pitch 1.059463094352953
The future direction might be not having such a user-visible filter at
all, similar to how vf_scale went away (or actually, redirects to
libavfilter's vf_scale).
This is part of trying to get rid of --af-defaults, and the af
resample filter.
It requires a complicated mechanism to set the defaults on the resample
filter for backwards compatibility.
With the recent changes to the script it does not incur a startup delay
by default due to starting youtube-dl and waiting for it. This was the
main reason for making libmpv have a different default.
Starting sub processes from a library can still be a bit fishy, but I
think it's ok. Still mention it in the libmpv header. There were already
other cases where libmpv would start its own processes, such as the X11
backend calling xdg-screensaver. (The reason why this is fishy is
because UNIX process management sucks: SIGCHLD and the wait() syscall
make sub processes non-transparent and could potentially introduce
conflicts with code trying to use them.)
Previously, toggling pause would generate no osd response, and changing
that wasn't even configurable. This was surprising to users who
generally expect to see *where* pause / unpause is taking place (#3028).
The previous default was osd-bar (unless the user specified
--no-osd-bar, in which case case it was osd-msg). Aside from requiring
some twisted logic to implement, this surprised users since osd-msg3
wasn't displayed when seeking with the keyboard (#3028), so the time
seeked to was never displayed.
Before this commit, some autoselection of tracks coming from files
loaded with --external-files was still done. This commit removes all of
it, and the only way to select a track is via the explicit stream
selection options like --vid/--sid/--aid.
I think this was always the original intention. The change could in
theory still unintentionally surprise some users, so add a changelog
entry.
This does not affect --audio-file/--sub-file, even if these contain
mismatching track types. E.g. if audio files passed to --audio-file
contain subtitles, these should still be selected. Past feature requests
indicate that users want this.
This enables DXVA2 hardware decoding with ra_d3d11. It should be useful
for Windows 7, where D3D11VA is not available. Images are transfered
from D3D9 to D3D11 using D3D9Ex surface sharing[1].
Following Microsoft's recommendations, it uses a queue of shared
surfaces, similar to Microsoft's ISurfaceQueue. This will hopefully
prevent surface sharing from impacting parallelism and allow multiple
D3D11 frames to be in-flight at once.
[1]: https://msdn.microsoft.com/en-us/library/windows/desktop/ee913554.aspx
Reasons why you'd want this see manpage additions. Disabled by default,
because it would increase latency of live streams by default. (Or well,
at least it would be another problem when trying getting lower latency.)
This tried to be clever by waiting for a longer time each time the
buffer was underrunning, or shorter if it was getting better. I think
this was pretty weird behavior and makes no sense. If the user really
wants the stream to buffer longer, he/she/it can just pause the player
(the network caches will continue to be filled until they're full).
Every time I actually noticed this code triggering in my own use, I
didn't find it helpful. Apart from that it was pretty hard to test.
Some waiting is needed to avoid that the player just plays the available
data as fast as possible (to compensate for late frames and underrunning
audio). Just use a fixed wait time, which can now be controlled by the
new --cache-pause-wait option.
Was only available with --demuxer-lavf-format=help and the demuxer
needed to be used for it to actually print the list.
This can be used in the future to check if 'dash' support was compiled
with FFmpeg so ytdl_hook can use it instead. For now, dashdec is too
rudimentary to be used right away.
Uses the EGL width/height by default when the user fails to set
the android-surface-width/android-surface-height options.
This means the vo-resize command is optional, and does not need to
be implemented on android devices which do not support rotation.
Signed-off-by: Aman Gupta <aman@tmm1.net>
Technically, the user could just use --vd-lavc-o with the same result.
But I find it better to make this an explicit option, so we can document
the ups and downs, and also avoid setting it for non-h264.
This commit introduces a new --oset-metadata key-value-list option,
allowing the user to specify output metadata when encoding
(eg. --oset-metadata=title="Hello",comment="World").
A second option --oremove-metadata is added to exclude existing metadata
from the output file (assuming --ocopy-metadata is enabled).
Not all output formats support all tags, but luckily libavcodec
simply discards unsupported keys.
--copy-metadata describes the result of the option better, (copying metadata
from the source file to the output file). Marks the old --no-ometadata
OPT_REMOVED with a suggestion for the new --no-ocopy-metadata.
Async compute in particular seems to cause problems on some drivers, and
even when supprted the benefits are not that massive from the tests I
have seen, so it's probably safe to keep off by default.
Async transfer on the other hand seems to work better and offers a more
substantial improvement, so it's kept on.
Instead of using a single primary queue, we generate multiple
vk_cmdpools and pick the right one dynamically based on the intent.
This has a number of immediate benefits:
1. We can use async texture uploads
2. We can use the DMA engine for buffer updates
3. We can benefit from async compute on AMD GPUs
Unfortunately, the major downside is that due to the lack of QF
ownership tracking, we need to use CONCURRENT sharing for all resources
(buffers *and* images!). In theory, we could try figuring out a way to
get rid of the concurrent sharing for buffers (which is only needed for
compute shader UBOs), but even so, the concurrent sharing mode doesn't
really seem to have a significant impact over here (nvidia). It's
possible that other platforms may disagree.
Our deadlock-avoidance strategy is stupidly simple: Just flush the
command every time we need to switch queues, and make sure all
submission and callbacks happen in FIFO order. This required lifting the
cmds_pending and cmds_queued out from vk_cmdpool to mpvk_ctx, and some
functions died/got moved as a result, but that's a relatively minor
change.
On my hardware this is a fairly significant performance boost, mainly
due to async transfers. (Nvidia doesn't expose separate compute queues
anyway). On AMD, this should be a performance boost as well due to async
compute.
This uses the new vk_signal mechanism to order all access to textures.
This has several advantageS:
1. It allows real synchronization of image access across multiple frames
when using multiple queues for parallelism.
2. It allows using events instead of pipeline barriers, which is a
finer-grained synchronization primitive that allows for more
efficient layout transitions over longer durations.
This commit also restructures some of the implicit transition code for
renderpasses to be more flexible and correct. (Note: this technically
drops the ability to transition the image out of undefined layout when
not blending, but that was a bug anyway and needs to be done properly)
vo_gpu: vulkan: remove no-longer-true optimization
The change to the output_tex format makes this no longer true, and it
actually seems to hurt performance now as well. So just don't do it
anymore. I also realized it hurts performance when drawing an OSD, so
it's probably not a good idea anyway.
I don't want to add another field to display stream and demuxer cache
separately, so just add them up. This strangely makes sense, since the
forward buffered stream cache amount consists of data not read by the
demuxer yet. (If the demuxer cache has buffered the full stream, the
forward buffered stream cache amount is 0.)
Reduce it from 75MB in both directions (forward/backwards) to 10MB each.
The stream cache is kind of becoming useless in favor of the demuxer
cache. Using both doesn't make much sense, because they will contain
duplicated data for no reason.
Still leave it at 10MB, which may help with mp4 a bit. libavformat's mp4
demuxer tends to seek too much, so we try to avoid triggering network
level seeks by having some caching in the stream layer.
