If we want to be able to handle conversion between hw formats in filter
chains, then we need to be able to load hwdec_interops from filters, as
the VO is only ever going to initialise one interop, based on its
configuration. That means that in almost all situations, only one of
the required interops will be loaded at the time the filter is
initialised.
The existing code has some assumptions that new hwdec_interops will not
be loaded after the vo has picked one to use. This change fixes two
instances:
* Refusing to load a new hwdec_interop if there is at least one
loaded already.
* Not recalculating the set of formats known to the autoconvert
filter when a new output format shows up. This leads to autoconvert
not knowing that a new format is supported when the hwdec interop is
lazily loaded.
It turns out that it's generally more useful to look up hwdecs by image
format, rather than device type. In the situations where we need to
find one, we generally know the image format we're dealing with. Doing
this avoids us having to create mappings from image format to device
type.
The most significant part of this change is filling in the image format
for the various hw interops. There is a hw_imgfmt field today today, but
only a couple of the interops fill it in, and that seems to be because
we've never actually used this piece of metadata before. Well, now we
have a good use for it.
In the confusing landscape of hardware video decoding APIs, we have had
a long standing support gap for the v4l2 based APIs implemented for the
various SoCs from Rockship, Amlogic, Allwinner, etc. While VAAPI is the
defacto default for desktop GPUs, the developers who work on these SoCs
(who are not the vendors!) have preferred to implement kernel APIs
rather than maintain a userspace driver as VAAPI would require.
While there are two v4l2 APIs (m2m and requests), and multiple forks of
ffmpeg where support for those APIs languishes without reaching
upstream, we can at least say that these APIs export frames as DRMPrime
dmabufs, and that they use the ffmpeg drm hwcontext.
With those two constants, it is possible for us to write a
hwdec-interop without worrying about the mess underneath - for the most
part.
Accordingly, this change implements a hwdec-interop for any decoder
that produces frames as DRMPrime dmabufs. The bulk of the heavy
lifting is done by the dmabuf interop code we already had from
supporting vaapi, and which I refactored for reusability in a previous
set of changes.
When we combine that with the fact that we can't probe for supported
formats, the new code in this change is pretty simple.
This change also includes the hwcontext_fns that are required for us to
be able to configure the hwcontext used by `hwdec=drm-copy`. This is
technically unrelated, but it seemed a good time to fill this gap.
From a testing perspective, I have directly tested on a RockPRO64,
while others have tested with different flavours of Rockchip and on
Amlogic, providing m2m coverage.
I have some other SoCs that I need to spin up to test with, but I don't
expect big surprises, and when we inevitably need to account for new
special cases down the line, we can do so - we won't be able to support
every possible configuration blindly.
When I introduced the concept of lazy loading of hwdecs by img format,
I did not propagate the probing flag correctly, leading to the new
normal loading path not runnng with probing set, meaning that any
errors would show up, creating unnecessary noise.
This change fixes this regression.
Historically, we have treated hwdec interop loading as a completely
separate step from loading the hwdecs themselves. Some hwdecs need an
interop, and some don't, and users generally configure the exact
hwdec they want, so interops that aren't relevant for that hwdec
shouldn't be loaded to save time and avoid warning/error spam.
The basic approach here is to recognise that interops are tied to
hwdecs by imgfmt. The hwdec outputs some format, and an interop is
needed to get that format to the vo without read back.
So, when we try to load an hwdec, instead of just blindly loading all
interops as we do today, let's pass the imgfmt in and only load
interops that work for that format. If more than one interop is
available for the format, the existing logic (whatever it is) will
continue to be used to pick one.
We also have one callsite in filters where we seem to pre-emptively
load all the interops. It's probably possible to trace down a specific
format but for now I'm just letting it keep loading all of them; it's
no worse than before.
You may notice there is no documentation update - and that's because
the current docs say that when the interop mode is `auto`, the interop
is loaded on demand. So reality now reflects the docs. How nice.
In the distant past, the cuviddec backed copy hwaccel could be
configured directly using lavc options. However, since that time,
we gained support for automatic hw ctx creation which ended up
bypassing the lavc options.
Rather than trying to find a way to pass those options again, a
better idea is to make the 'cuda-decode-device' option, used by
the interop hwaccels, work for the copy hwaccels too.
And that's pretty simple: we have to add a create function that
checks the option and passes it on to ffmpeg.
Note that this does require a slight re-jig to the configuration
flags, as we now have a scenario where we want to build with support
for the cuda copy hwaccels but not the interop ones. So we need
a distinct configuration flag for that combination.
Fixes#7295.
Get rid of the old vf.c code. Replace it with a generic filtering
framework, which can potentially handle more than just --vf. At least
reimplementing --af with this code is planned.
This changes some --vf semantics (including runtime behavior and the
"vf" command). The most important ones are listed in interface-changes.
vf_convert.c is renamed to f_swscale.c. It is now an internal filter
that can not be inserted by the user manually.
f_lavfi.c is a refactor of player/lavfi.c. The latter will be removed
once --lavfi-complex is reimplemented on top of f_lavfi.c. (which is
conceptually easy, but a big mess due to the data flow changes).
The existing filters are all changed heavily. The data flow of the new
filter framework is different. Especially EOF handling changes - EOF is
now a "frame" rather than a state, and must be passed through exactly
once.
Another major thing is that all filters must support dynamic format
changes. The filter reconfig() function goes away. (This sounds complex,
but since all filters need to handle EOF draining anyway, they can use
the same code, and it removes the mess with reconfig() having to predict
the output format, which completely breaks with libavfilter anyway.)
In addition, there is no automatic format negotiation or conversion.
libavfilter's primitive and insufficient API simply doesn't allow us to
do this in a reasonable way. Instead, filters can use f_autoconvert as
sub-filter, and tell it which formats they support. This filter will in
turn add actual conversion filters, such as f_swscale, to perform
necessary format changes.
vf_vapoursynth.c uses the same basic principle of operation as before,
but with worryingly different details in data flow. Still appears to
work.
The hardware deint filters (vf_vavpp.c, vf_d3d11vpp.c, vf_vdpaupp.c) are
heavily changed. Fortunately, they all used refqueue.c, which is for
sharing the data flow logic (especially for managing future/past
surfaces and such). It turns out it can be used to factor out most of
the data flow. Some of these filters accepted software input. Instead of
having ad-hoc upload code in each filter, surface upload is now
delegated to f_autoconvert, which can use f_hwupload to perform this.
Exporting VO capabilities is still a big mess (mp_stream_info stuff).
The D3D11 code drops the redundant image formats, and all code uses the
hw_subfmt (sw_format in FFmpeg) instead. Although that too seems to be a
big mess for now.
f_async_queue is unused.
Finally get rid of all the HWDEC_* things, and instead rely on the
libavutil equivalents. vdpau still uses a shitty hack, but fuck the
vdpau code.
Remove all the now unneeded remains. The vdpau preemption thing was not
unused anymore; if someone cares this could probably be restored.
With the recent changes, mpv's internal mechanisms got synced to
libavcodec's once more. Some things are still needed for filters (until
the mechanism gets replaced), but there's no need to require other hwdec
methods to use these fields. So remove them where they are unnecessary.
Also fix some minor leaks in the dxva2 backends, and set the driver_name
field in the Apple ones. Untested on Apple crap.
Change it from explicit metadata about every hwaccel method to trying to
get it from libavcodec. As shown by add_all_hwdec_methods(), this is a
quite bumpy road, and a bit worse than expected.
This will probably cause a bunch of regressions. In particular I didn't
check all the strange decoder wrappers, which all cause some sort of
special cases each. You're volunteering for beta testing by using this
commit.
One interesting thing is that we completely get rid of mp_hwdec_ctx in
vd_lavc.c, and that HWDEC_* mostly goes away (some filters still use it,
and the VO hwdec interops still have a lot of code to set it up, so it's
not going away completely for now).
Lots of shit code for nothing. We probably could just use libavutil's
code for all of this. But for now go with this, since it tends to
prevent stupid terminal messages during probing (libavutil has no
mechanism to selectively suppress errors specifically during probing).
Ignores the "emulated" API flag (for avoiding vaapi/vdpau wrappers), but
it doesn't matter that much for -copy anyway.
Make the VO<->decoder interface capable of supporting multiple hwdec
APIs at once. The main gain is that this simplifies autoprobing a lot.
Before this change, it could happen that the VO loaded the "wrong" hwdec
API, and the decoder was stuck with the choice (breaking hw decoding).
With the change applied, the VO simply loads all available APIs, so
autoprobing trickery is left entirely to the decoder.
In the past, we were quite careful about not accidentally loading the
wrong interop drivers. This was in part to make sure autoprobing works,
but also because libva had this obnoxious bug of dumping garbage to
stderr when using the API. libva was fixed, so this is not a problem
anymore.
The --opengl-hwdec-interop option is changed in various ways (again...),
and renamed to --gpu-hwdec-interop. It does not have much use anymore,
other than debugging. It's notable that the order in the hwdec interop
array ra_hwdec_drivers[] still matters if multiple drivers support the
same image formats, so the option can explicitly force one, if that
should ever be necessary, or more likely, for debugging. One example are
the ra_hwdec_d3d11egl and ra_hwdec_d3d11eglrgb drivers, which both
support d3d11 input.
vo_gpu now always loads the interop lazily by default, but when it does,
it loads them all. vo_opengl_cb now always loads them when the GL
context handle is initialized. I don't expect that this causes any
problems.
It's now possible to do things like changing between vdpau and nvdec
decoding at runtime.
This is also preparation for cleaning up vd_lavc.c hwdec autoprobing.
It's another reason why hwdec_devices_request_all() does not take a
hwdec type anymore.
It seems this will be useful for Rokchip DRM hwcontext integration.
DRM hwcontexts have additional internal structure which can be different
depending on the decoder, and which is not part of the generic hwcontext
API. Rockchip has 1 layer, which EGL interop happens to translate to a
RGB texture, while VAAPI (mapped as DRM hwcontext) will use multiple
layers. Both will use sw_format=nv12, and thus are indistinguishable on
the mp_image_params level. But this is needed to initialize the EGL
mapping and the vo_gpu video renderer correctly.
We hope that the layer count is enough to tell whether EGL will
translate the data to a RGB texture (vs. 2 texture resembling raw nv12
data). For that we introduce MP_IMAGE_HW_FLAG_OPAQUE.
This commit adds the flag, infrastructure to set it, and an "example"
for D3D11.
The D3D11 addition is quite useless at this point. But later we want to
get rid of d3d11_update_image_attribs() anyway, while we still need a
way to force d3d11vpp filter insertion, so maybe it has some
justification (who knows). In any case it makes testing this easier.
Obviously it also adds some basic support for triggering the opaque
format for decoding, which will use a driver-specific format, but which
is not supported in shaders. The opaque flag is not used to determine
whether d3d11vpp needs to be inserted, though.
hw_vaapi.c didn't do much interesting anymore. Other than the function
to create a device for decoding with vaapi-copy, everything can be done
by generic code. Other libavcodec hwaccels are planned to provide the
same API as vaapi. It will be possible to drop the other hw_ files in
the future. They will use this generic code instead.
The main change is with video/hwdec.h. mp_hwdec_info is made opaque (and
renamed to mp_hwdec_devices). Its accessors are mainly thread-safe (or
documented where not), which makes the whole thing saner and cleaner. In
particular, thread-safety rules become less subtle and more obvious.
The new internal API makes it easier to support multiple OpenGL interop
backends. (Although this is not done yet, and it's not clear whether it
ever will.)
This also removes all the API-specific fields from mp_hwdec_ctx and
replaces them with a "ctx" field. For d3d in particular, we drop the
mp_d3d_ctx struct completely, and pass the interfaces directly.
Remove the emulation checks from vaapi.c and vdpau.c; they are
pointless, and the checks that matter are done on the VO layer.
The d3d hardware decoders might slightly change behavior: dxva2-copy
will not use the VO device anymore if the VO supports proper interop.
This pretty much assumes that any in such cases the VO will not use any
form of exclusive mode, which makes using the VO device in copy mode
unnecessary.
This is a big refactor. Some things may be untested and could be broken.
Philip Langdale
wm4