Purpose uncertain. I guess it's slightly better, maybe.
The move of the sws/zimg options from VO opts (vo_opt_list) to the
top-level option list is tricky. VO opts have some helper code in vo.c,
that sends VOCTRL_SET_PANSCAN to the VO on every VO opts change. That's
because updating certain VO options used to be this way (and not just
the panscan option). This isn't needed anymore for sws/zimg options, so
explicitly move them away.
This provides a very similar API to sws_utils.h, which can be used to
convert and scale from one mp_image to another.
This commit adds only the code, but does not use it anywhere.
The code is quite preliminary and barely tested. It supports only a few
pixel formats, and will return failure for many others. (Unlike
libswscale, which tries to support anything that FFmpeg knows.)
zimg itself accepts only planar formats. Supporting other formats
requires manual packing/unpacking. (Compared to libswscale, the zimg API
is generally lower level, but allows for more flexibility.) Only BGR0
output was actually tested. It appears to work.
The justification for this is the fact that the `video-aspect` property
doesn't work well with `cycle_values` commands that include the value
"-1".
The "video-aspect" property has effectively no change in behavior, but
we may want to make it read-only in the future. I think it's probably
fine to leave as-is, though.
Fixes#6068.
Semantics a bit questionable. This is done for the OSC (next commit),
and a comment added the manpage explicitly states this. Meaning this is
probably garbage and needs to revisit when the OSC changes and/or
someone wants to use this margin feature for something else.
Not sure about the subtitle thing. It's imaginable that someone uses
these options to create empty borders for subtitles on the bottom, so
subtitles should be located there. On the other hand, this gives a
rather unpolished user experience when using the (later added) OSC
feature to not overlap with the video. There's not much of a point if
the OSC still overlaps the video. However, I'm too lazy to think about
this, so it stays like it is.
Somewhat similar to the old --cache-file, except for the demuxer cache.
Instead of keeping packet data in memory, it's written to disk and read
back when needed.
The idea is to reduce main memory usage, while allowing fast seeking in
large cached network streams (especially live streams). Keeping the
packet metadata on disk would be rather hard (would use mmap or so, or
rewrite the entire demux.c packet queue handling), and since it's
relatively small, just keep it in memory.
Also for simplicity, the disk cache is append-only. If you're watching
really long livestreams, and need pruning, you're probably out of luck.
This still could be improved by trying to free unused blocks with
fallocate(), but since we're writing multiple streams in an interleaved
manner, this is slightly hard.
Some rather gross ugliness in packet.h: we want to store the file
position of the cached data somewhere, but on 32 bit architectures, we
don't have any usable 64 bit members for this, just the buf/len fields,
which add up to 64 bit - so the shitty union aliases this memory.
Error paths untested. Side data (the complicated part of trying to
serialize ffmpeg packets) untested.
Stream recording had to be adjusted. Some minor details change due to
this, but probably nothing important.
The change in attempt_range_joining() is because packets in cache
have no valid len field. It was a useful check (heuristically
finding broken cases), but not a necessary one.
Various other approaches were tried. It would be interesting to list
them and to mention the pros and cons, but I don't feel like it.
And add simpler aliases for the modes.
I'm not sure how to name things, and the option list is in general full
of different conventions. Some names are shortened, some are explicit
and long.
I guess options that have a chance to be used normally (i.e. not obscure
tuning or debugging) should have a short and convenient names.
In this specific case, play-direction is like a mixture of both. It
should be either playback-direction or play-dir, not shorten one word
but not the other.
The convenience aliases are because I got sick of typing out "backward".
I guess "back" would also do it, but there's no proper antonym (and
maybe it's "wrong" in the strict sense of the word).
Has been deprecated for almost 3 years. Manpage didn't mention the
deprecation, but CLI and release notes did. It wouldn't be much effort
to keep this option working, but I just don't see the damn point.
--start/--end can specify chapters using special syntax, which is
equivalent.
See manpage additions. This is a huge hack. You can bet there are shit
tons of bugs. It's literally forcing square pegs into round holes.
Hopefully, the manpage wall of text makes it clear enough that the whole
shit can easily crash and burn. (Although it shouldn't literally crash.
That would be a bug. It possibly _could_ start a fire by entering some
sort of endless loop, not a literal one, just something where it tries
to do work without making progress.)
(Some obvious bugs I simply ignored for this initial version, but
there's a number of potential bugs I can't even imagine. Normal playback
should remain completely unaffected, though.)
How this works is also described in the manpage. Basically, we demux in
reverse, then we decode in reverse, then we render in reverse.
The decoding part is the simplest: just reorder the decoder output. This
weirdly integrates with the timeline/ordered chapter code, which also
has special requirements on feeding the packets to the decoder in a
non-straightforward way (it doesn't conflict, although a bugmessmass
breaks correct slicing of segments, so EDL/ordered chapter playback is
broken in backward direction).
Backward demuxing is pretty involved. In theory, it could be much
easier: simply iterating the usual demuxer output backward. But this
just doesn't fit into our code, so there's a cthulhu nightmare of shit.
To be specific, each stream (audio, video) is reversed separately. At
least this means we can do backward playback within cached content (for
example, you could play backwards in a live stream; on that note, it
disables prefetching, which would lead to losing new live video, but
this could be avoided).
The fuckmess also meant that I didn't bother trying to support
subtitles. Subtitles are a problem because they're "sparse" streams.
They need to be "passively" demuxed: you don't try to read a subtitle
packet, you demux audio and video, and then look whether there was a
subtitle packet. This means to get subtitles for a time range, you need
to know that you demuxed video and audio over this range, which becomes
pretty messy when you demux audio and video backwards separately.
Backward display is the most weird (and potentially buggy) part. To
avoid that we need to touch a LOT of timing code, we negate all
timestamps. The basic idea is that due to the navigation, all
comparisons and subtractions of timestamps keep working, and you don't
need to touch every single of them to "reverse" them.
E.g.:
bool before = pts_a < pts_b;
would need to be:
bool before = forward
? pts_a < pts_b
: pts_a > pts_b;
or:
bool before = pts_a * dir < pts_b * dir;
or if you, as it's implemented now, just do this after decoding:
pts_a *= dir;
pts_b *= dir;
and then in the normal timing/renderer code:
bool before = pts_a < pts_b;
Consequently, we don't need many changes in the latter code. But some
assumptions inhererently true for forward playback may have been broken
anyway. What is mainly needed is fixing places where values are passed
between positive and negative "domains". For example, seeking and
timestamp user display always uses positive timestamps. The main mess is
that it's not obvious which domain a given variable should or does use.
Well, in my tests with a single file, it suddenly started to work when I
did this. I'm honestly surprised that it did, and that I didn't have to
change a single line in the timing code past decoder (just something
minor to make external/cached text subtitles display). I committed it
immediately while avoiding thinking about it. But there really likely
are subtle problems of all sorts.
As far as I'm aware, gstreamer also supports backward playback. When I
looked at this years ago, I couldn't find a way to actually try this,
and I didn't revisit it now. Back then I also read talk slides from the
person who implemented it, and I'm not sure if and which ideas I might
have taken from it. It's possible that the timestamp reversal is
inspired by it, but I didn't check. (I think it claimed that it could
avoid large changes by changing a sign?)
VapourSynth has some sort of reverse function, which provides a backward
view on a video. The function itself is trivial to implement, as
VapourSynth aims to provide random access to video by frame numbers (so
you just request decreasing frame numbers). From what I remember, it
wasn't exactly fluid, but it worked. It's implemented by creating an
index, and seeking to the target on demand, and a bunch of caching. mpv
could use it, but it would either require using VapourSynth as demuxer
and decoder for everything, or replacing the current file every time
something is supposed to be played backwards.
FFmpeg's libavfilter has reversal filters for audio and video. These
require buffering the entire media data of the file, and don't really
fit into mpv's architecture. It could be used by playing a libavfilter
graph that also demuxes, but that's like VapourSynth but worse.
Linux analog TV support (via tv://) was excessively complex, and
whenever I attempted to use it (cameras or loopback devices), it didn't
work well, or would have required some major work to update it. It's
very much stuck in the analog past (my favorite are the frequency tables
in frequencies.c for analog TV channels which don't exist anymore).
Especially cameras and such work fine with libavdevice and better than
tv://, for example:
mpv av://v4l2:/dev/video0
(adding --profile=low-latency --untimed even makes it mostly realtime)
Adding a new input layer that targets such "modern" uses would be
acceptable, if anyone is interested in it. The old TV code is just too
focused on actual analog TV.
DVB is rather obscure, but has an active maintainer, so don't remove it.
However, the demux/stream ctrl layer must go, so remove controls for
channel switching. Most of these could be reimplemented by using the
normal method for option runtime changes.
stream_dvd.c contained large amounts of ancient, unmaintained code,
which has been historically moved to libdvdnav. Basically, it's full of
low level parsing of DVD on-disc structures.
Kill it for good. Users can use the remaining dvdnav support (which
basically operates in non-menu mode). Users have reported that
libdvdread sometimes works better, but this is just libdvdnav's problem
and not ours.
The demuxer cache is the only cache now. Might need another change to
combat seeking failures in mp4 etc. The only bad thing is the loss of
cache-speed, which was sort of nice to have.
The currently-displayed tags make sense for music files, but similar
information for video is more commonly - or at least should be - put
under other tags, while the audio-related tags are often used for
other information on video files (particularly with youtube-dl's
output).
The --hwdec* options are a good fit for the vd_lavc local option
struct. This annoyingly requires manual prefixing of most of these
options with --vd-lavc (could be avoided by using more sub-struct
craziness, but let's not).
Until now, stopping playback aborted the demuxer and I/O layer violently
by signaling mp_cancel (bound to libavformat's AVIOInterruptCB
mechanism). Change it to try closing them gracefully.
The main purpose is to silence those libavformat errors that happen when
you request termination. Most of libavformat barely cares about the
termination mechanism (AVIOInterruptCB), and essentially it's like the
network connection is abruptly severed, or file I/O suddenly returns I/O
errors. There were issues with dumb TLS warnings, parsers complaining
about incomplete data, and some special protocols that require server
communication to gracefully disconnect.
We still want to abort it forcefully if it refuses to terminate on its
own, so a timeout is required. Users can set the timeout to 0, which
should give them the old behavior.
This also removes the old mechanism that treats certain commands (like
"quit") specially, and tries to terminate the demuxers even if the core
is currently frozen. This is for situations where the core synchronized
to the demuxer or stream layer while network is unresponsive. This in
turn can only happen due to the "program" or "cache-size" properties in
the current code (see one of the previous commits). Also, the old
mechanism doesn't fit particularly well with the new one. We wouldn't
want to abort playback immediately on a "quit" command - the new code is
all about giving it a chance to end it gracefully. We'd need some sort
of watchdog thread or something equally complicated to handle this. So
just remove it.
The change in osd.c is to prevent that it clears the status line while
waiting for termination. The normal status line code doesn't output
anything useful at this point, and the code path taken clears it, both
of which is an annoying behavior change, so just let it show the old
one.
On machines with multiple GPUs, /dev/dri/renderD128 isn't guaranteed
to point to a valid vaapi device. This just adds the option to specify
what path to use.
The old fallback /dev/dri/card0 is gone but that's not a loss as its
a legacy interface no longer accepted as valid by libva.
Fixes#4320
Removes the awkward notification through VO_EVENT_WIN_STATE.
Unfortunately, some awkwardness remains in mp_property_display_fps(),
because the property has conflicting semantics with the option.
The playback start logic explicitly waits until the first frame has been
displayed. Usually this will introduce a wait of 1 vsync. For normal
playback this doesn't matter, but with respect to low latency needs,
this only leads to additional data getting queued up in the demuxer or
network buffers.
Another thing is that the timing logic decodes 1 frame ahead (= 1 frame
extra latency) to determine the exact duration of a frame.
To be fair, there doesn't really seem to be a hard reason why this is
needed. With the current code, enabling the option does lead to A/V
desync sometimes (if the demuxer FPS is too inaccurate), and also frame
drops at playback start in some situations. But this all seems to be
avoidable, if the timing logic were to be rewritten completely, which
should probably happen in the future. Thus the new option comes with the
warning that it can be removed any time. This is also why the option has
"hack" in the name.
the title bar is now within the window bounds instead of outside. same
as QuickTime Player. it supports several standard styles, two dark and
two light ones. additionally we have properly rounded corners now and
the borderless window also has the proper window shadow.
Also make the earliest supported macOS version 10.10.
Fixes#4789, #3944
Use the decoder wrapper that was introduced for video. This removes all
code duplication the old audio decoder wrapper had with the video code.
(The audio wrapper was copy pasted from the video one over a decade ago,
and has been kept in sync ever since by the power of copy&paste. Since
the original copy&paste was possibly done by someone who did not answer
to the LGPL relicensing, this should also remove all doubts about
whether any of this code is left, since we now completely remove any
code that could possibly have been based on it.)
There is some complication with spdif handling, and a minor behavior
change (it will restrict the list of codecs to spdif if spdif is to be
used), but there should not be any difference in practice.
Get rid of the old vf.c code. Replace it with a generic filtering
framework, which can potentially handle more than just --vf. At least
reimplementing --af with this code is planned.
This changes some --vf semantics (including runtime behavior and the
"vf" command). The most important ones are listed in interface-changes.
vf_convert.c is renamed to f_swscale.c. It is now an internal filter
that can not be inserted by the user manually.
f_lavfi.c is a refactor of player/lavfi.c. The latter will be removed
once --lavfi-complex is reimplemented on top of f_lavfi.c. (which is
conceptually easy, but a big mess due to the data flow changes).
The existing filters are all changed heavily. The data flow of the new
filter framework is different. Especially EOF handling changes - EOF is
now a "frame" rather than a state, and must be passed through exactly
once.
Another major thing is that all filters must support dynamic format
changes. The filter reconfig() function goes away. (This sounds complex,
but since all filters need to handle EOF draining anyway, they can use
the same code, and it removes the mess with reconfig() having to predict
the output format, which completely breaks with libavfilter anyway.)
In addition, there is no automatic format negotiation or conversion.
libavfilter's primitive and insufficient API simply doesn't allow us to
do this in a reasonable way. Instead, filters can use f_autoconvert as
sub-filter, and tell it which formats they support. This filter will in
turn add actual conversion filters, such as f_swscale, to perform
necessary format changes.
vf_vapoursynth.c uses the same basic principle of operation as before,
but with worryingly different details in data flow. Still appears to
work.
The hardware deint filters (vf_vavpp.c, vf_d3d11vpp.c, vf_vdpaupp.c) are
heavily changed. Fortunately, they all used refqueue.c, which is for
sharing the data flow logic (especially for managing future/past
surfaces and such). It turns out it can be used to factor out most of
the data flow. Some of these filters accepted software input. Instead of
having ad-hoc upload code in each filter, surface upload is now
delegated to f_autoconvert, which can use f_hwupload to perform this.
Exporting VO capabilities is still a big mess (mp_stream_info stuff).
The D3D11 code drops the redundant image formats, and all code uses the
hw_subfmt (sw_format in FFmpeg) instead. Although that too seems to be a
big mess for now.
f_async_queue is unused.
Restores behaviour prior to aef2ed5dc1.
That change was apparently unpopular. However, given the amount of
complaining over how hard it is to change the defaults by rebinding every
key, I think the extra option introduced by this commit is justified.
Technically not all behaviour is restored, because now --no-osd-bar will
not instead display the msg text on seek. I think that feature was a
little weird and is now easy enough to remedy with the --osd-on-seek
option.
This is part of trying to get rid of --af-defaults, and the af
resample filter.
It requires a complicated mechanism to set the defaults on the resample
filter for backwards compatibility.
Reasons why you'd want this see manpage additions. Disabled by default,
because it would increase latency of live streams by default. (Or well,
at least it would be another problem when trying getting lower latency.)
This tried to be clever by waiting for a longer time each time the
buffer was underrunning, or shorter if it was getting better. I think
this was pretty weird behavior and makes no sense. If the user really
wants the stream to buffer longer, he/she/it can just pause the player
(the network caches will continue to be filled until they're full).
Every time I actually noticed this code triggering in my own use, I
didn't find it helpful. Apart from that it was pretty hard to test.
Some waiting is needed to avoid that the player just plays the available
data as fast as possible (to compensate for late frames and underrunning
audio). Just use a fixed wait time, which can now be controlled by the
new --cache-pause-wait option.
Remove them from the big MPOpts struct and move them to their sub
structs. In the places where their fields are used, create a private
copy of the structs, instead of accessing the semi-deprecated global
option struct instance (mpv_global.opts) directly.
This actually makes accessing these options finally thread-safe. They
weren't even if they should have for years. (Including some potential
for undefined behavior when e.g. the OSD font was changed at runtime.)
This is mostly transparent. All options get moved around, but most users
of the options just need to access a different struct (changing sd.opts
to a different type changes a lot of uses, for example).
One thing which has to be considered and could cause potential
regressions is that the new option copies must be explicitly updated.
sub_update_opts() takes care of this for example.
Another thing is that writing to the option structs manually won't work,
because the changes won't be propagated to other copies. Apparently the
only affected case is the implementation of the sub-step command, which
tries to change sub_delay. Handle this one explicitly (osd_changed()
doesn't need to be called anymore, because changing the option triggers
UPDATE_OSD, and updates the OSD as a consequence). The way the option
value is propagated is rather hacky, but for now this will do.
--copy-metadata describes the result of the option better, (copying metadata
from the source file to the output file). Marks the old --no-ometadata
OPT_REMOVED with a suggestion for the new --no-ocopy-metadata.
A release has been made, so drop options deprecated for that release.
Also drop some options which have been deprecated a much longer time
before.
Also fix a typo in client-api-changes.rst.
Some old crap which nobody needs and which probably nobody uses.
This relies on a GCC extension: using "## __VA_ARGS__" to remove the
comma from the argument list if the va args are empty. It's supported
by clang, and there's some chance newer standards will introduce a
proper way to do this. (Even if it breaks somewhere, it will be a
problem only for 1 release, since I want to drop the deprecated
properties immediately.)
Change it from explicit metadata about every hwaccel method to trying to
get it from libavcodec. As shown by add_all_hwdec_methods(), this is a
quite bumpy road, and a bit worse than expected.
This will probably cause a bunch of regressions. In particular I didn't
check all the strange decoder wrappers, which all cause some sort of
special cases each. You're volunteering for beta testing by using this
commit.
One interesting thing is that we completely get rid of mp_hwdec_ctx in
vd_lavc.c, and that HWDEC_* mostly goes away (some filters still use it,
and the VO hwdec interops still have a lot of code to set it up, so it's
not going away completely for now).
Make the VO<->decoder interface capable of supporting multiple hwdec
APIs at once. The main gain is that this simplifies autoprobing a lot.
Before this change, it could happen that the VO loaded the "wrong" hwdec
API, and the decoder was stuck with the choice (breaking hw decoding).
With the change applied, the VO simply loads all available APIs, so
autoprobing trickery is left entirely to the decoder.
In the past, we were quite careful about not accidentally loading the
wrong interop drivers. This was in part to make sure autoprobing works,
but also because libva had this obnoxious bug of dumping garbage to
stderr when using the API. libva was fixed, so this is not a problem
anymore.
The --opengl-hwdec-interop option is changed in various ways (again...),
and renamed to --gpu-hwdec-interop. It does not have much use anymore,
other than debugging. It's notable that the order in the hwdec interop
array ra_hwdec_drivers[] still matters if multiple drivers support the
same image formats, so the option can explicitly force one, if that
should ever be necessary, or more likely, for debugging. One example are
the ra_hwdec_d3d11egl and ra_hwdec_d3d11eglrgb drivers, which both
support d3d11 input.
vo_gpu now always loads the interop lazily by default, but when it does,
it loads them all. vo_opengl_cb now always loads them when the GL
context handle is initialized. I don't expect that this causes any
problems.
It's now possible to do things like changing between vdpau and nvdec
decoding at runtime.
This is also preparation for cleaning up vd_lavc.c hwdec autoprobing.
It's another reason why hwdec_devices_request_all() does not take a
hwdec type anymore.
These couldn't be relicensed, and won't survive the LGPL transition. The
other existing filters are mostly LGPL (except libaf glue code).
This remove the deprecated pan option. I guess it could be restored by
inserting a libavfilter filter (if there's one), but for now let it be
gone.
This temporarily breaks volume control (and things related to it, like
replaygain).
The internal stereo3d filter was removed due to being GPL only, and due
to being a mess that somehow used libavfilter's filter. Without this
filter, it's hard to remove our internal stereo3d image attribute, so
even using libavfilter's stereo3d filter would not work too well (unless
someone fixes it and makes it able to use AVFrame metadata, which we
then could mirror in mp_image).
This was never well thought-through anyway, so just drop it. I think
some "downsampling" support would still make sense, maybe that can be
readded later.
Like the manual says, this is technically undefined behaviour. See:
https://msdn.microsoft.com/en-us/library/windows/desktop/ff476085.aspx
In particular, MSDN says texture arrays created with the BIND_DECODER
flag cannot be used with CreateShaderResourceView, which means they
can't be sampled through SRVs like normal Direct3D textures. However,
some programs (Google Chrome included) do this anyway for performance
and power-usage reasons, and it appears to work with most drivers.
Older AMD drivers had a "bug" with zero-copy decoding, but this appears
to have been fixed. See #3255, #3464 and http://crbug.com/623029.
This is a new RA/vo_gpu backend that uses Direct3D 11. The GLSL
generated by vo_gpu is cross-compiled to HLSL with SPIRV-Cross.
What works:
- All of mpv's internal shaders should work, including compute shaders.
- Some external shaders have been tested and work, including RAVU and
adaptive-sharpen.
- Non-dumb mode works, even on very old hardware. Most features work at
feature level 9_3 and all features work at feature level 10_0. Some
features also work at feature level 9_1 and 9_2, but without high-bit-
depth FBOs, it's not very useful. (Hardware this old is probably not
fast enough for advanced features anyway.)
Note: This is more compatible than ANGLE, which requires 9_3 to work
at all (GLES 2.0,) and 10_1 for non-dumb-mode (GLES 3.0.)
- Hardware decoding with D3D11VA, including decoding of 10-bit formats
without truncation to 8-bit.
What doesn't work / can be improved:
- PBO upload and direct rendering does not work yet. Direct rendering
requires persistent-mapped PBOs because the decoder needs to be able
to read data from images that have already been decoded and uploaded.
Unfortunately, it seems like persistent-mapped PBOs are fundamentally
incompatible with D3D11, which requires all resources to use driver-
managed memory and requires memory to be unmapped (and hence pointers
to be invalidated) when a resource is used in a draw or copy
operation.
However it might be possible to use D3D11's limited multithreading
capabilities to emulate some features of PBOs, like asynchronous
texture uploading.
- The blit() and clear() operations don't have equivalents in the D3D11
API that handle all cases, so in most cases, they have to be emulated
with a shader. This is currently done inside ra_d3d11, but ideally it
would be done in generic code, so it can take advantage of mpv's
shader generation utilities.
- SPIRV-Cross is used through a NIH C-compatible wrapper library, since
it does not expose a C interface itself.
The library is available here: https://github.com/rossy/crossc
- The D3D11 context could be made to support more modern DXGI features
in future. For example, it should be possible to add support for
high-bit-depth and HDR output with DXGI 1.5/1.6.
See manpage additions.
(In ffmpeg-mpv and Libav, this is still called "cuvid". Libav won't work
yet, because it has no frame params support yet, but this could get
fixed soon.)
This commit allows to use the AV_PIX_FMT_DRM_PRIME newly introduced
format in ffmpeg that allows decoders to provide an AVDRMFrameDescriptor
struct.
That struct holds dmabuf fds and information allowing zerocopy rendering
using KMS / DRM Atomic.
This has been tested on RockChip ROCK64 device.
Mostly an obscure option for testing. But --videotoolbox-format can be
deprecated, as it becomes redundant.
We rely on the libavutil hwcontext implementation to reject invalid
pixfmts, or not to blow up if they are incompatible.
Signed-off-by: wm4 <wm4@nowhere>
Rename --stats to --load-stats-overlay and add an entry to options.rst
over the original commit.
Signed-off-by: wm4 <wm4@nowhere>
In addition to the built-in nvidia compiler, we now also support a
backend based on libshaderc. shaderc is sort of like glslang except it
has a C API and is available as a dynamic library.
The generated SPIR-V is now cached alongside the VkPipeline in the
cached_program. We use a special cache header to ensure validity of this
cache before passing it blindly to the vulkan implementation, since
passing invalid SPIR-V can cause all sorts of nasty things. It's also
designed to self-invalidate if the compiler gets better, by offering a
catch-all `int compiler_version` that implementations can use as a cache
invalidation marker.
This time based on ra/vo_gpu. 2017 is the year of the vulkan desktop!
Current problems / limitations / improvement opportunities:
1. The swapchain/flipping code violates the vulkan spec, by assuming
that the presentation queue will be bounded (in cases where rendering
is significantly faster than vsync). But apparently, there's simply
no better way to do this right now, to the point where even the
stupid cube.c examples from LunarG etc. do it wrong.
(cf. https://github.com/KhronosGroup/Vulkan-Docs/issues/370)
2. The memory allocator could be improved. (This is a universal
constant)
3. Could explore using push descriptors instead of descriptor sets,
especially since we expect to switch descriptors semi-often for some
passes (like interpolation). Probably won't make a difference, but
the synchronization overhead might be a factor. Who knows.
4. Parallelism across frames / async transfer is not well-defined, we
either need to use a better semaphore / command buffer strategy or a
resource pooling layer to safely handle cross-frame parallelism.
(That said, I gave resource pooling a try and was not happy with the
result at all - so I'm still exploring the semaphore strategy)
5. We aggressively use pipeline barriers where events would offer a much
more fine-grained synchronization mechanism. As a result of this, we
might be suffering from GPU bubbles due to too-short dependencies on
objects. (That said, I'm also exploring the use of semaphores as a an
ordering tactic which would allow cross-frame time slicing in theory)
Some minor changes to the vo_gpu and infrastructure, but nothing
consequential.
NOTE: For safety, all use of asynchronous commands / multiple command
pools is currently disabled completely. There are some left-over relics
of this in the code (e.g. the distinction between dev_poll and
pool_poll), but that is kept in place mostly because this will be
re-extended in the future (vulkan rev 2).
The queue count is also currently capped to 1, because of the lack of
cross-frame semaphores means we need the implicit synchronization from
the same-queue semantics to guarantee a correct result.
This is done in several steps:
1. refactor MPGLContext -> struct ra_ctx
2. move GL-specific stuff in vo_opengl into opengl/context.c
3. generalize context creation to support other APIs, and add --gpu-api
4. rename all of the --opengl- options that are no longer opengl-specific
5. move all of the stuff from opengl/* that isn't GL-specific into gpu/
(note: opengl/gl_utils.h became opengl/utils.h)
6. rename vo_opengl to vo_gpu
7. to handle window screenshots, the short-term approach was to just add
it to ra_swchain_fns. Long term (and for vulkan) this has to be moved to
ra itself (and vo_gpu altered to compensate), but this was a stop-gap
measure to prevent this commit from getting too big
8. move ra->fns->flush to ra_gl_ctx instead
9. some other minor changes that I've probably already forgotten
Note: This is one half of a major refactor, the other half of which is
provided by rossy's following commit. This commit enables support for
all linux platforms, while his version enables support for all non-linux
platforms.
Note 2: vo_opengl_cb.c also re-uses ra_gl_ctx so it benefits from the
--opengl- options like --opengl-early-flush, --opengl-finish etc. Should
be a strict superset of the old functionality.
Disclaimer: Since I have no way of compiling mpv on all platforms, some
of these ports were done blindly. Specifically, the blind ports included
context_mali_fbdev.c and context_rpi.c. Since they're both based on
egl_helpers, the port should have gone smoothly without any major
changes required. But if somebody complains about a compile error on
those platforms (assuming anybody actually uses them), you know where to
complain.
This code could not be relicensed. The intention was to write new filter
code (which could handle both audio and video), but that's a bit of
work. Write some code that can do audio conversion (resampling,
downmixing, etc.) without the old audio filter chain code in order to
speed up the LGPL relicensing.
If you build with --disable-libaf, nothing in audio/filter/* is compiled
in. It breaks a few features, such as --volume, --af, pitch correction
on speed changes, replaygain.
Most likely this adds some bugs, even if --disable-libaf is not used.
(How the fuck does EOF notification work again anyway?)
This mechanism uses system() and shouldn't even exist. x11_common.c has
its own solution for the original problem (disabling Linux DE
screensavers without MPlayer/mpv having to link a dbus lib). If that is
not sufficient, you can create a simple Lua script.
Incidentally fixes#4888.
Some people use very wide display modes such as 3840x240 with their CRT
televisions because it lessens scaling artifacts in video game
emulators. When using a 3840x240 display mode on a 4:3 CRT television,
the pixel aspect ratio is 1:12, so in order to watch a video with mpv on
the same television without changing the display mode, the user should
use --monitorpixelaspect=1:12.
Unfortunately, 1:12 (or 0.083) was out of range for the
--monitorpixelaspect option. There was no good reason for this, so
extend the range of the option to 1:32-32:1 (0.03125-32,) which should
be more than enough to support "super-wide" display modes like these.
This is related to #4483, but it doesn't fix the issue (which was to do
with subtitle rendering.)
This removes all GPL only code from it, and that's the whole purpose.
Also happens to be much simpler.
The "deinterlace" option still sort of exists, but only as runtime
changeable option. The main change in behavior is that the property will
not report back the actual deint state. Or in other words, if inserting
or initializing the filter fails, the deinterlace property will still
return "yes". This is in line with most recent behavior changes to
properties and options.
I really wouldn't care much about this, but some parts of the core code
are under HAVE_GPL, so there's some need to get rid of it. Simply turn
the video equalizer from its current fine-grained handling with vf/vo
fallbacks into global options. This makes updating them much simpler.
This removes any possibility of applying video equalizers in filters,
which affects vf_scale, and the previously removed vf_eq. Not a big
loss, since the preferred VOs have this builtin.
Remove video equalizer handling from vo_direct3d, vo_sdl, vo_vaapi, and
vo_xv. I'm not going to waste my time on these legacy VOs.
vo.eq_opts_cache exists _only_ to send a VOCTRL_SET_EQUALIZER, which
exists _only_ to trigger a redraw. This seems silly, but for now I feel
like this is less of a pain. The rest of the equalizer using code is
self-updating.
See commit 96b906a51d for how some video equalizer code was GPL only.
Some command line option names and ranges can probably be traced back to
a GPL only committer, but we don't consider these copyrightable.
So far, we had a thread-safe way to read options, but no option update
notification mechanism. Everything was funneled though the main thread's
central mp_option_change_callback() function. For example, if the
panscan options were changed, the function called vo_control() with
VOCTRL_SET_PANSCAN to manually notify the VO thread of updates. This
worked, but's pretty inconvenient. Most of these problems come from the
fact that MPlayer was written as a single-threaded program.
This commit works towards a more flexible mechanism. It adds an update
callback to m_config_cache (the thing that is already used for
thread-safe access of global options).
This alone would still be rather inconvenient, at least in context of
VOs. Add another mechanism on top of it that uses mp_dispatch_queue, and
takes care of some annoying synchronization issues. We extend
mp_dispatch_queue itself to make this easier and slightly more
efficient.
As a first application, use this to reimplement certain VO scaling and
renderer options. The update_opts() function translates these to the
"old" VOCTRLs, though.
An annoyingly subtle issue is that m_config_cache's destructor now
releases pending notifications, and must be released before the
associated dispatch queue. Otherwise, it could happen that option
updates during e.g. VO destruction queue or run stale entries, which is
not expected.
Rather untested. The singly-linked list code in dispatch.c is probably
buggy, and I bet some aspects about synchronization are not entirely
sane.
Tends to be somewhat glitchy if subtitles are enabled, and you enable
and disable tracks.
On error, this will disable --lavfi-complex, which will result in
whatever behavior.
This does two separate rather intrusive things:
1. Make the hwdec context (which does initialization, provides the
device to the decoder, and other basic state) and frame mapping
(getting textures from a mp_image) separate. This is more
flexible, and you could map multiple images at once. It will
help removing some hwdec special-casing from video.c.
2. Switch all hwdec API use to ra. Of course all code is still
GL specific, but in theory it would be possible to support other
backends. The most important change is that the hwdec interop
returns ra objects, instead of anything GL specific. This removes
the last dependency on GL-specific header files from video.c.
I'm mixing these separate changes because both requires essentially
rewriting all the glue code, so better do them at once. For the same
reason, this change isn't done incrementally.
hwdec_ios.m is untested, since I can't test it. Apart from superficial
mistakes, this also requires dealing with Apple's texture format
fuckups: they force you to use GL_LUMINANCE[_ALPHA] instead of GL_RED
and GL_RG. We also need to report the correct format via ra_tex to
the renderer, which is done by find_la_variant(). It's unknown whether
this works correctly.
hwdec_rpi.c as well as vo_rpi.c are still broken. (I need to pull my
RPI out of a dusty pile of devices and cables, so, later.)
Remove this code because it could be argued that it contains GPL-only
code (see commit 642e963c86 for details).
The remaining aspect methods appear to work just as well, are
potentially more compatible to other players, and the code becomes much
simpler.
This partially reverts the change from a longer time ago to always build
DXVA2 and D3D11VA together.
To make it simpler, we change the following:
- building with ANGLE headers is now required to build D3D hwaccels
- if DXVA2 is enabled, D3D11VA is still forcibly built
- the CLI vo_opengl ANGLE backend is now under --egl-angle-win32
This is done to reduce the dependency mess slightly.
The changes to path list options is basically getting rid of the need to
pass multiple paths to a single option. Instead, you can use the option
multiple times. The old behavior can be used by using the -set suffix
with the option.
Change some options to path lists. For example --script is now append by
default, and if you use --script-set, you need to use ":"/";" as
separator instead of ",".
--sub-paths/--audio-file-paths is a deprecated alias now, and will break
if the user tries to pass multiple paths to it. I'm assuming that if
these are used, most users will pass only 1 path anyway.
--opengl-shaders has more compatibility handling, since it's probably
rather common that users pass multiple options to it.
Also document all that in the manpage.
I'll probably regret this later, as it somewhat increases the complexity
of the option parser, rather than increasing it.
I noticed that the previous default, bitstream, actually breaks with
some shitty anamorphic DVD rips that signal square pixel aspect in the
bitstream. So I think the "container" method is a better default.
In a bunch of cases, we emulate highly platform specific APIs on a
higher level across all OSes, such as IPC, terminal, subprocess
handling, and more. We have source files for each OS, and they implement
all the same mpv internal API.
Selecting which source file to use on an OS can be tricky, because there
is partially overlapping and emulated APIs (consider Cygwin on Windows).
Add a pick_first_matching_dep() function to make this slightly easier
and more structured.
Also add dummy backends in some cases, to deal with APIs not being
available.
Clarify the Windows dependency identifiers, as these are the most
confusing.
This affects options like --vf or --display-tags. These used a "*"
suffix to match all options starting with a specific name, and handled
the rest in the option parser. Change this to remove the "*" special
case, and require every option parser to declare a list of allowed
suffixes via m_option_type.actions.
The new way is conceptually simpler, because we don't have to account
for the "*" in a bunch of places anymore, and instead everything is
centrally handled in the CLI part of the option parser, where it's
actually needed.
It automatically enables suffixes like -add for a bunch of other
stringlist options.
This was an annoying option type. And still is. But at least it's on the
same level as m_option_type_print_fn now, and can probably cleaned up
further like it. Both types are for options that are only on the command
line, always have special handling (i.e. do something with them in
parse_commandline.c before passing them to the generic
m_config.c/m_option.c layers), and are m_options only for --list-options
and (oddly) the split_opt_silent() function.
This was especially grating because it causes problems with the
option/property unification, uses as only thing OPT_FLAG_STORE, and
behaves weird with the client API or scripts.
It can be reimplemented in a much simpler way, although it needs
slightly more code. (Simpler because less special cases.)
These files have all in common that they were fully or mostly taken from
mplayer.c. (mplayer.c was a huge file that contains almost all of the
playback core, until it was split into multiple parts.) This was
probably the hardest part to relicense, because so much code was moved
around all the time.
player/audio.c still does not compile. We'll have to redo audio
filtering. Once that is done, we can probably actually provide an
actual LGPL configure switch.
Here is a relatively detailed list of potential issues:
8d190244: author did not reply, parts were made GPL-only in a previous
commit.
7882ea9b: author could not be reached, but the code is gone. wscript
still has --datadir switch, but I don't think this is relevant to
copyright.
f197efd5: unclear origin, but I consider the code gone anyway (replaced
with generic OSD mechanisms).
8337d9c2: author did not reply, but only the option still exists (under
a different name), other code was removed.
d8fd7131: did not reply. Disabled in a previous commit.
05258251: same author as above. Both fields actually seem to have
vanished (even when tracking renames), so no action taken.
d459e644, 268b2c1a: author did not reply, but we reuse only the options
(with different names and slightly or fully different semantics, and
completely different implementations), so I don't think this is relevant
for copyright.
09e742fe, 17c39c4e: same as above.
e8a173de, bff4b3ee: author could not be reached. The commands were
reworked to properties, and the code outside of the TV code were moved
back to the TV code. So I don't think copyright applies to the current
command.c parts (mp_property_tv_color, mp_property_tv_freq,
mp_property_tv_scan). The TV parts remain GPL.
0810e427: could not be reached. Disabled in a previous commit.
43744a2d: unknown author, but this was replaced by dynamic alloc (if the
change is even copyrightable).
116ca0c7: unknown author; reasoning see input.c relicensing commit.
e7e4d1d8: these semantics still exist, but as generic code, and this
code was fully removed.
f1175cd9: the author of the cited patch is unknown, and upon inspection
it turns out that I was only using the idea to pause the player on EOF,
so I claim it's not copyright relevant.
25affdcc: author could not be reached (yet) - but it's only a function
rename, not copyrightable.
5728504c was committed by Arpi (who agreed), but hints that it might be
by a different author. In fact it seems to be mostly this patch:
http://lists.mplayerhq.hu/pipermail/mplayer-dev-eng/2001-November/002041.html
The author did not respond, but it all seems to have been removed later.
It's a terrible mess though. Arpi reverted the A-V sync code at first,
but left the RTC code for a while. The following commits remove these
changes 100%: 14b35442, 7181a091, 31482783, 614f8475, df58e822.
cehoyos did explicitly not agree to LGPL, but was involved in the
following changes:
c99d8fc8: applied a patch and didn't modify it, the original author
agreed.
40ac0d31: author could not be reached, but all code is gone anyway. The
"af" command has a similar function, but works completely different and
actually reuses a mechanism older than this patch.
54350436: applied a patch, but didn't modify it, except for adding a
German translation, which was removed later.
a2dda036: same situation as above
240b743e: this was made GPL-only in a previous commit
7b25afd7: same as above (for now)
kirijua could not be reached, but was a regular patch contributor:
c2c997fd: video equalizer code move; probably not copyrightable. Is GPL
due to Nick anyway.
be54f481: technically, this became the audio track property later. But
all what is left is the fact that you pass a track ID to it, so consider
the original coypright non-relevant.
2f376d1b: this was rewritten in b7052b43, but for now we can afford to
be careful, so this was marked as GPL only in a previous commit.
43844d09: remaining parts in main.c were reverted in a previous commit.
anders has mostly disagreed with the LGPL relicensing. Does not want
libaf to become LGPL, but made some concessions. In particular, he
granted us permission to relicense 4943e9c52c and 242aa6ebd4. We also
consider some of his changes remaining in mpv not relevant for copyright
(such as 735de602 - we won't remove the this option completely). We will
completely remove his other contributions, including the entire audio
filter chain. For now, this stuff is marked as GPL only. The remaining
question is how much code in player/audio.c (based on the former
mplayer.c and dec_audio.c) is under his copyright. I made claims about
this in a previous commit.
Nick(ols) Kurshev, svn username "nick" and "nickols_k", could not be
reached. He had a lot of changes in early MPlayer. It seems all of that
was removed, at least in mpv. His main work, like VIDIX or libswscale
work, does not exist in mpv anymore, but the changes to mplayer.c and
other core parts still deserve attention:
a4119f6b, fb927549, ad3529b8, e11b23dc, 5f2178be, 93c371d5: removed in
b43d67e0, d1628d12, 24ed01fe, df58e822.
0a83c6ec, 104c125e, 4e067f62, aec5dcc8, b587a3d6, f3de6e6b: DR, VAA, and
"tune" stuff was fully removed later on or replaced with other
mechanisms.
340183b0: screenshots were redone later (the VOCTRL was even removed,
with an independent implementation using the same VOCTRL a few years
later), so not relevant anymore. Basically only the 's' shortcut remains
(but not its implementation).
92c5c274, bffd4007, 555c6766: for now marked as GPL only in a previous
commit.
Might contain some trace amounts of "michael"'s copyright, who agreed to
LGPL only once the core is relicensed. This will still be respected, but
I don't think it matters at this in this case. (Some code touched by him
was merged into mplayer.c, and then disappeared after heavy
refactoring.)
I tried to be as careful and as complete as possible. It can't be
excluded that amends to this will be made later.
This does not make the player LGPL yet.
Commit d8fd7131 changes this. "tibcu" did not reply. While I'm not sure
whether copyrightable code remains, I'd tend towards saying yes (the
basic idea is still intact after years of refactoring), so make it
GPL-only for now.
Nick and kiriuja could not be reached, and created/changed this in
92c5c274, 6441a5ad, bffd4007, 555c6766, c2c997fd. The video equalizer
stuff was redone fully later, but there are still parts that look too
similar and basically use the same approach. I'm more comfortable with
declaring it GPL only for now.
I plan to redo them later in a way that will remove copyright.
cehoyos, who did not agree to the LGPL relicensing, added this in commit
240b743e. The actual implementation of it is already guarded with
HAVE_GPL. The field_dominance field in the option struct won't be
guarded.
We won't keep GPL-only core code forever, so deprecate it as well. To
apply forced deinterlacing, a libavfilter filter can probably be
removed, or we merge this functionality into the --deinterlace option
(without using copyrighted stuff).
If they are copyrightable, iive's changes (commits listed in cache.c)
would make them LGPL 3+. To avoid that options.c becoming LGPL 3, move
the option declarations to cache.c. struct mp_cache_opts is still in
options.h, but we consider that irrelevant, and options.h will become
LGPL 2.1+ later.
"Almost" because this might contain copyright by michael, who agreed
with LGPL, but only once the core is LGPL. This is preparation for that
to happen.
Apart from that, the usual remarks apply. In particular, dec_video.c
started out quite chaotic with no modularization, but was later
basically gutted, and in general rewritten a bunch of times. Not going
to give a history lesson.
Special attention needs to be given to 3 patches by cehosos, who did not
agree to the relicensing:
240b743ebd: --field-dominance
e32cbbf7dc: reinit VO if aspect ratio changes
306f6243fd: use container aspect if codec aspect unset (?)
The first patch is pretty clearly still in the current code, and needs
to be disabled for LGPL.
The functionality of the second patch is still active, but implemented
completely different, and as part of general frame parameter changes (at
the time of the patch, MPlayer already reinitialized the VO on frame
size and pixel format changes - all this was merged into a single check
for changing image parameters).
The third patch makes me a bit more uncomfortable. It appears the code
was moved to dec_video.c in de68b8f23c, and further changed in
82f0d373, 0a0bb905, and bf13bd0d. You could claim that cehoyos'
copyright still sticks. Fortunately, we implement alternative aspect
detection, which is simpler and probably preferable, and which arguably
contains none of the original code and logic, and thus should be fully
safe.
While I don't know if cehoyos' copyright actually still applies, I'm
more comfortable with making the code GPL-only for now. Also change the
default to use the (in future) plain LGPL code, and deprecate the one
associated with the GPL code, so we can eventually remove the GPL code.
But it's also possible we decide that the copyright doesn't apply, and
undo the deprecation and GPL guards.
I expect that users won't notice anything. If you ask me, the old aspect
method was probably an accidental bug instead of intentional behavior.
Although, the new aspect method was broken too, so I had to fix it.
Before this, options with co->data==NULL (i.e. no storage) were not
added to the bridge (except alias options). There are a few options
which might make sense to allow via the bridge ("profile" and
"include"). So allow them.
In command_init(), we merely remove the co->data check, the rest of the
diff is due to switching the if/else branches for convenience.
We also must explicitly error on M_PROPERTY_GET if co->data==NULL. All
other cases check it in some way.
Explicitly exclude options from the property bridge, which would be
added due this, and the result would be pointless.
Certain options, such as --profile, --help, and many others require
special-handling, because they don't fit conceptually into the option
and property model. They don't store data, but perform actions.
This caused the situation that profiles could not be set when using
libmpv in encoding mode (although you should probably not used libmpv in
encoding mode). Using libmpv always ends up in calling
m_config_set_option_raw_direct(), while --profile was handled in
m_config_parse_option().
Solve this by moving the handling of this from m_config_parse_option()
to m_config_set_option_raw_direct(). Actually we just stuff most of this
into m_config_handle_special_options(), which is only called by the
aforementioned function.
Strangely this also means that the --h/--help option declarations need
to be changed, because they used OPT_PRINT, and now the option "parser"
is always invoked before the special code. Thus, make them a string.
Them being OPT_PRINT was apparently always redundant. (The other option
declarations are moved for cosmetic purposes only.)
The most weird change is how co->data==NULL is handled. We now allow
passing down involved options to m_config_set_option_raw_direct(). The
thing is that we don't want them to error if the command line parser is
using them (with special handling done there), while all other code
paths should raise an error. We try using M_SETOPT_FROM_CMDLINE to
distinguish these cases.
Note that normal libmpv users are supposed to use the "apply-profile"
command instead.
This probably contains a bunch of bugs, which you should report.
Implements JS with almost identical API to the Lua support.
Key differences from Lua:
- The global mp, mp.msg and mp.utils are always available.
- Instead of returning x, error, return x and expose mp.last_error().
- Timers are JS standard set/clear Timeout/Interval.
- Supports CommonJS modules/require.
- Added at mp.utils: getenv, read_file, write_file and few more.
- Global print and dump (expand objects) functions.
- mp.options currently not supported.
See DOCS/man/javascript.rst for more details.
List of changes:
1. Rename `signfs` to `scale`, to better match what it actually does
(force --sub-scale to apply to ASS subtitles), and fix the blatantly
wrong documentation (it actually specifically does *not* apply to
signs)
2. Rename `--sub-ass-style-override` to `--sub-ass-override` to help
reduce confusion between it and `--sub-ass-force-style`, as well as
pointing out that it doesn't necessarily actually override styles.
(The new `scale` option, for example, only sets
ASS_OVERRIDE_BIT_FONT_SIZE, but not ASS_OVERRIDE_BIT_STYLE)
3. Mention that `--sub-ass-override` is generally sort of smart about
only overriding dialog, not signs.
In a multi GPU scenario, it may be desirable to use different GPUs
for decode and display responsibilities. For example, if a secondary
GPU has better video decoding capabilities.
In such a scenario, we need to initialise a separate context for each
GPU, and use the display context in hwdec_cuda, while passing the
decode context to avcodec.
Once that's done, the actually hand-off between the two GPUs is
transparent to us (It happens during the cuMemcpy2D operation which
copies the decoded frame from a cuda buffer to the OpenGL texture).
In the end, the bulk of the work is around introducing a new
configuration option to specify the decode device.
af_volume is deprecated, and so are its replaygain sub-options. To make
it possible to use replaygain without deprecated options (and of course
to make it available at all after af_volume is dropped), reintroduce
them as top-level options.
This also means that they are easily changeable at runtime by using them
as properties. Change the "volume" property to use the new update
mechanism as well.
We don't actually bother sharing the implementation between new and
deprecated mechanisms, as the deprecated one will simply be deleted.
For the from_dB() functions, we mention anders' copyright, although I'm
not sure if a mere formula is copyrightable. This will have to be
determined later.
This whole change is mostly untested. Our distributed human CI will take
care of it.
Instead of pausing if --keep-open is active, stop
at end but continue playing if seeking backwards.
And then stop again when end is reached.
Signed-off-by: wm4 <wm4@nowhere>
Over the PR, the option was renamed, and the manpage additions were
slightly changed/enhanced.
Also "announce" the plans to undeprecate it with changed semantics
later. The deprecation period is needed to warn script authors and
client API users (etc.) of the change.
This is done because everyone seems to expect --loop to loop the current
file, not the playlist. Even in cases when only 1 file is on the
playlist, the --loop-file semantics seem to be preferred.
Add subtitle filter to remove additions for deaf or hard-of-hearing
(SDH). This is for English, but may in part work for others too.
This is an ASS filter and the intention is that it can always be
enabled as it by default do not remove parts that may be normal text.
Harder filtering can be enabled with an additional option.
Signed-off-by: wm4 <wm4@nowhere>
since there are different views on what ontop is, we make the ontop
window level modifiable. at the moment only support for macOS was added.
the default for macOS was changed from 'system' to 'window' since this
fixes an unwanted behaviour in fullscreen and in general causes less
issues with expected behaviour.
Fixes#2376#3974
To make it easier for the eyes, multi line subtitles should
be left justified (for most languages).
This adds an option to define how subtitles are to be justified
inpendently of how they are aligned.
Also add option to enable --sub-justify to be applied on ASS subtitles.
This was excessively useless, and I want my time back that was needed to
explain users why they don't want to use it.
It captured the byte stream only, and even for types of streams it was
designed for (like transport streams), it was rather questionable.
As part of the removal, un-inline demux_run_on_thread() (which has only
1 call-site now), and sort of reimplement --stream-dump to write the
data directly instead of using the removed capture code.
(--stream-dump is also very useless, and I struggled coming up with an
explanation for it in the manpage.)
vo_opengl used to have it as sub-option, which made it very hard to pass
down option values to backends in a generic way (even if these options
were completely backend-specific). For --opengl-dcomposition we used a
VOFLAG to deal with this. Fortunately, sub-options are gone, and we can
just add it as global option.
Move the option to context_angle.c and add it as global option. I
thought about adding a mechanism to let backends declare options, which
would get magically picked up my m_config instead of having to add them
to the global option list manually (similar to VO vo_driver.options),
but decided against this complexity just for 1 or 2 backends. Likewise,
it could have been added as a single option to avoid the boilerplate of
an option struct, but then again there are probably going to be more
angle suboptions, and it's cleaner.
Since for mpv CLI, the player state is a singleton, full prefetching is
a bit tricky. We do it only on the demuxer layer.
The implementation reuses the old "open thread". This means there is
significant potential for regressions even if the new option is not
used. This is made worse by the fact that I barely tested this code.
The generic mpctx_run_reentrant() wrapper is also removed - this was its
only user, and its remains become part of the new implementation.
Introduce the --opengl-hwdec-interop option, which replaces
--hwdec-preload. The new option allows explicit selection of the interop
backend.
This is relatively complex, and I would have preferred not to add this,
but it's probably useful to debug certain problems. In exchange, the
"new" option documents that pretty much any but the simplest use of it
will not be forward compatible.
Remove ad_spdif from the normal codec list, and select it explicitly.
One goal was to decouple this from the normal codec selection, so
they're less entangled and the decoder selection code can be simplified
in the far future. This means spdif codec selection is now done
explicitly via select_spdif_codec(). We can also remove the weird
requirements on "dts" and "dts-hd" for the --audio-spdif option, and it
can just do the right thing.
Now both video and audio codecs consist of a single codec family each,
vd_lavc and ad_lavc.
this replaces the old fullscreen with the native
macOS fullscreen. additional the
--fs-black-out-screens was removed since the new
API doesn't support it in a way the old one did.
it can possibly be re-added if done manually.
Fixes#2857#3272#1352#2062#3864
Long planned. Leads to some sanity.
There still are some rather gross things. Especially g_groups is ugly,
and a hack that can hopefully be removed. (There is a plan for it, but
whether it's implemented depends on how much energy is left.)
Deactivating this options makes it possible to
circumvent the default OS X behavior of using
points. Windows on HiDPI resolutions won't open
in double the size anymore and videos are display
in their native resolution when windowed.
Fixes#3716
Just that actually changing it at runtime won't do anything.
This deals with a nasty initialization order issue with encoding.
Encoding is initialized after options have initialized, but before
--load-scripts is checked and executed. Encoding initialization accesses
FFmpeg API, thus it has to run after FFmpeg is initialized (which also
implies it's initialized after options/logging init). On the other hand,
it sets the encoding builtin profile, which possibly sets --load-scripts
to "no". That failed at this point because --load-scripts was marked as
fixed.
Just marking it as not fixed gets rid of the headache, even if it's not
perfectly orthodox.
At this point, all other hwaccels provide -copy modes, and vdpau is the
exception with not having one. Although there is vf_vdpaurb, it's less
convenient in certain situations, and exposes some issues with the
filter chain code as well.
- Change connector selection to accept human readable names (such as
eDP-1, HDMI-A-2) rather than arbitrary numbers.
- Change GPU selection to accept GPU number rather than device paths.
- Merge connector and GPU selection into one --drm-connector.
- Add support for --drm-connector=help.
- Add support for --drm-* in EGL backend.
- Refactor KMS; reduce state sharing across drm_common.
Don't require special property code for handling updates, and simply use
the UPDATE_AUDIO flag instead. Also make runtime changes to
--audio-client-name take effect.
Rename the text subtitle options from --sub-text- to --sub-
and --ass- options to --sub-ass-.
The intention is to common sub options to prefixed --sub-
and special ASS option be seen as a special version of sub options.
The OSD options that work like the --sub- options are still named
--osd-.
Man page updated including a short note about renamed --sub-text-*
and --ass-* options to --sub-* and --sub-ass-*.
Move the screensaver enable/disable determination to a central place,
and call it if the stop-screensaver property is changed.
Also, do not stop the screensaver when in idle mode (i.e. no file is
loaded).
Fixes#3615.
I'm not sure if this option affects anything or if it's a placebo,
especially since the VO thread is now registered with MMCSS. Still, I
think --priority=high may have helped back when I used mplayer2 on a
netbook. It's also possible that encoding-mode users would want to set
--priority=idle.
Anyway, it was one of the last M_OPT_FIXED options, so fix that.
The intention of M_OPT_FIXED is to make options not runtime-changeable,
so trying to set them at runtime will always error. This is not wanted
for --profile and --include, for which there is no reason to block them
at runtime.
Fixes#3581.
Seems like this confused users quite often.
Instead of --profile=pseudo-gui, --player-operation-mode=pseudo-gui now
has to be used to invoke pseudo GUI mode. The old way still works, and
still behaves in the old way.
If one of the audio output format options is set, brually reinit the
audio chain.
Since the audio-channels property is still mapped to the deprecated
read-only property, "options/audio-channels" currently has to be used,
e.g. "cycle-values options/audio-channels 2 7.1".
With the merging of options and properties, the mpv_set_option()
function is close to being useless, and mpv_set_property() can be used
for everything instead. There are certain conflicts remaining, which are
explained in depth in the docs. For now, none of this should affect
existing code using the client API.
Make mpv_set_property() redirect to mpv_set_option() before
initialization.
Remove some options marked as M_OPT_FIXED. The "pause" and "speed"
options cannot be written anymore without the playloop being notified by
it, so the M_OPT_FIXED does nothing. For "vo-mmcss-profile", the problem
was lack of synchronization, which has been added. I'm not sure what the
problem was with "frames" - I think it was only marked as M_OPT_FIXED
because changing it during playback will have no effect. Except for
pause/speed, these changes are needed to make them writable as
properties after mpv_initialize().
Also replace all remaining uses of CONF_GLOBAL with M_OPT_FIXED.
Use the new mechanism, instead of wrapped properties. As usual, extend
the update handling to some options that were forgotten/neglected
before. Rename video_reset_aspect() to video_reset_params() to make it
more "general" (and we can amazingly include write access to
video-aspect as well in this).
A recent change merged the window-scaler option and property, but forgot
that the option is float for some reason, while the property uses
double. This led to undefined behavior. Fix it by changing the option
to double too.
Setting the osc or ytdl properties will now load/unload the associated
scripts. (For ytdl this does not mean the currently played URL will be
reloaded.)
Also add a changelog entry for this, which also covers the preceding
work for --terminal.
Remove wrapper properties for OSD and video position updates, use the
new mechanism for them. We can mark the options directly. Update
behavior will work for more options (since I've casually marked more
affected options than the old less direct mechanism covered).
So client API users don't have to care about whether to set this before
or after mpv_initialize().
We still don't enable terminal at any point before mpv_initialize(),
because reasons.
This also subtly changes some behavior how terminal options are applied
while parsing. This essentially reverts the behavior as it was reported
in issue #2588. Originally, I was hoping to get rid of the pre-parse
option pass, but it seems this is absolutely not possible due to the way
config and command line parsing are entangled. Command line options take
priority over configfile options, so they have to be applied later - but
we also want to apply logging and terminal options as specified on the
command-line, but _before_ parsing the config files. It has to be this
way to see config file error messages on the terminal, or to hide them
if --no-terminal is used. libmpv considerations also factor into this.
Extend the flag-based notification mechanism that was used via
M_OPT_TERM. Make the vo_opengl update mechanism use this (which, btw.,
also fixes compilation with OpenGL renderers forcibly disabled).
While this adds a 3rd mechanism and just seems to further the chaos, I'd
rather have a very simple mechanism now, than actually furthering the
mess by mixing old and new update mechanisms. In particular, we'll be
able to remove quite some property implementations, and replace them
with much simpler update handling. The new update mechanism can also
more easily refactored once we have a final mechanism that handles
everything in an uniform way.
--quiet can be always set - the playloop checks it whenever rendering
the status line. Nothing special about it.
The ytdl- options are simply refetched by the Lua script every time a
stream is opened, so it makes sense to be able to change them at runtime
as well.
The VO options don't have a real reason to be marked with it anymore.
Some properties had a different type from their equivalent options (such
as mute, volume, deinterlace, edition). This wasn't really sane, as raw
option values should be always within their bounds. On the other hand,
these properties use a different type to reflect runtime limits (such as
range of available editions), or simply to improve the "UI" (you don't
want to cycle throuhg the completely useless "auto" value when cycling
the "mute" property).
Handle this by making them always return the option type, but also
allowing them to provide a "constricted" type, which is used for UI
purposes. All M_PROPERTY_GET_CONSTRICTED_TYPE changes are related to
this.
One consequence is that you can set the volume property to arbitrary
high values just like with the --volume option, but using the "add"
command it still restricts it to the --volume-max range.
Also deprecate --chapter, as it is grossly incompatible to the chapter
property. We pondered renaming it to --chapters, or introducing a more
powerful --range option, but concluded that --start --end is actually
enough.
These changes appear to take care of the last gross property/option
incompatibilities, although there might still be a few lurking.
Conflicts with the "playlist-pos" property. They're really a bit too
different, and since the --playlist-pos option is relatively new and
obscure, just rename it to get this out of the way.
This meant "cannot be used as per-file option" (wrt. playlist items).
Doesn't make too much sense anymore, especially given how obscure
per-file options are.
This also lets you just do "mpv --hwdec file.mkv", with the minor caveat
that the legacy syntax "--hwdec val" or "-hwdec val" (without "=") does
not work as expected anymore.
Move the embedded string with the builtin profiles to a separate
builtin.conf file. This makes it easier to read and edit, and you can
also check it for errors with --include=etc/builtin.conf. (Normally
errors are hidden intentionally, because there's no way to output error
messages this early, and because some options might not be present on
all platforms or with all configurations.)
The cuvid decoder already knows how to copy back to system memory
if NV12 frames are requested, and this will happen if the decoder
is used without the hwdec.
For convenience, let's add a wrapper hwdec so people don't have
to explicitly pick the cuvid decoder if they want this behaviour.
Nvidia's "NvDecode" API (up until recently called "cuvid" is a cross
platform, but nvidia proprietary API that exposes their hardware
video decoding capabilities. It is analogous to their DXVA or VDPAU
support on Windows or Linux but without using platform specific API
calls.
As a rule, you'd rather use DXVA or VDPAU as these are more mature
and well supported APIs, but on Linux, VDPAU is falling behind the
hardware capabilities, and there's no sign that nvidia are making
the investments to update it.
Most concretely, this means that there is no VP8/9 or HEVC Main10
support in VDPAU. On the other hand, NvDecode does export vp8/9 and
partial support for HEVC Main10 (more on that below).
ffmpeg already has support in the form of the "cuvid" family of
decoders. Due to the design of the API, it is best exposed as a full
decoder rather than an hwaccel. As such, there are decoders like
h264_cuvid, hevc_cuvid, etc.
These decoders support two output paths today - in both cases, NV12
frames are returned, either in CUDA device memory or regular system
memory.
In the case of the system memory path, the decoders can be used
as-is in mpv today with a command line like:
mpv --vd=lavc:h264_cuvid foobar.mp4
Doing this will take advantage of hardware decoding, but the cost
of the memcpy to system memory adds up, especially for high
resolution video (4K etc).
To avoid that, we need an hwdec that takes advantage of CUDA's
OpenGL interop to copy from device memory into OpenGL textures.
That is what this change implements.
The process is relatively simple as only basic device context
aquisition needs to be done by us - the CUDA buffer pool is managed
by the decoder - thankfully.
The hwdec looks a bit like the vdpau interop one - the hwdec
maintains a single set of plane textures and each output frame
is repeatedly mapped into these textures to pass on.
The frames are always in NV12 format, at least until 10bit output
supports emerges.
The only slightly interesting part of the copying process is that
CUDA works by associating PBOs, so we need to define these for
each of the textures.
TODO Items:
* I need to add a download_image function for screenshots. This
would do the same copy to system memory that the decoder's
system memory output does.
* There are items to investigate on the ffmpeg side. There appears
to be a problem with timestamps for some content.
Final note: I mentioned HEVC Main10. While there is no 10bit output
support, NvDecode can return dithered 8bit NV12 so you can take
advantage of the hardware acceleration.
This particular mode requires compiling ffmpeg with a modified
header (or possibly the CUDA 8 RC) and is not upstream in ffmpeg
yet.
Usage:
You will need to specify vo=opengl and hwdec=cuda.
Note that hwdec=auto will probably not work as it will try to use
vdpau first.
mpv --hwdec=cuda --vo=opengl foobar.mp4
If you want to use filters that require frames in system memory,
just use the decoder directly without the hwdec, as documented
above.
Don't access MPOpts directly, and always use the new m_config.h
functions for accessing them in a thread-safe way.
The goal is eventually removing the mpv_global.opts field, and the
demuxer/stream-layer specific hack that copies MPOpts to deal with
thread-safety issues.
This moves around a lot of options. For one, we often change the
physical storage location of options to make them more localized,
but these changes are not user-visible (or should not be). For
shared options on the other hand it's better to do messy direct
access, which is worrying as in that somehow renaming an option
or changing its type would break code reading them manually,
without causing a compilation error.
And introduce a global option which does this. Or more precisely, this
deprecates the global wasapi and coreaudio options, and adds a new one
that merges their functionality. (Due to the way the sub-option
deprecation mechanism works, this is simpler.)
Instead of requiring each VO or AO to manually add members to MPOpts and
the global option table, make it possible to register them automatically
via vo_driver/ao_driver.global_opts members. This avoids modifying
options.c/options.h every time, including having to duplicate the exact
ifdeffery used to enable a driver.
Whitelisting supported codecs is (probably) still better than just
allowing everything, given the weird FFmpeg API. I'm also assuming
Libav doesn't even have the codec ID, but I didn't check.
Also add a --teletext-page option, since otherwise it decodes every
teletext page and shows them in succession.
And yes, we can't use av_opt_set_int() - instead we have to set it as
string. Because FFmpeg's option system is terrible.
With the conversion from sub-options to global options, this becomes
useless. This change also comes slightly too soon, because not all VOs
have been changed yet.
vo_opengl sub-option were always rather annoying to handle. It seems
better to make them global options instead. This is simpler and easier
to use. The only disadvantage we are aware of is that it's not clear
that many/all of these new global options work with vo_opengl only.
--vo=opengl-hq is also deprecated.
There is extensive compatibility with the old behavior. One exception is
that --vo-defaults will not apply to opengl-hq (though with opengl it
still works). vo-cmdline is also dysfunctional and will be removed in a
following commit.
These changes also affect opengl-cb.
The update mechanism is still rather inefficient: it requires syncing
with the VO after each option change, rather than batching updates.
There's also no granularity (video.c just updates "everything", and if
auto-ICC profiles are enabled, vo_opengl.c will fetch them on each
update).
Most of the manpage changes were done by Niklas Haas <git@haasn.xyz>.
This is still rather basic.
run_reconfig() and run_control() update the options because it's needed
for panscan (and other video scaling options), and fullscreen, border,
ontop updates. In the old model, these options could be accessed only
while both playback thread and VO threads were locked (i.e. during
synchronous calls like vo_control()), so this should be sufficient in
order not to miss any updates. In the future, a more fine-grained update
mechanism could be added to handle these updates "exactly".
x11_common.c contains an evil hack, as I see no reasonable way to handle
this properly. The VO thread can't "lock" the main thread, so this is
not simple.
Make some existing properties behave more like options. This mostly
means they don't deny access if the associated component is not active,
but redirects to the option.
One kind of fishy change is that we apply --brightness etc. only if
they're not set to the default value. This won't necessarily work with
--vo=xv, but affects only cases where 1. the Xv adapter has been changed
to non-defaults, and 2. the user tries to reset them with mpv by passing
e.g. --brightness=0. We don't care about Xv, and the noted use-case is
dumb, so this change is acceptable.
Now options are accessible through the property list as well, which
unifies them to a degree.
Not all options support runtime changes (meaning affected components
need to be restarted for the options to take effects). Remove from the
manpage those properties which are cleanly mapped to options anyway.
From the user-perspective they're just options available through the
property interface.
Instead, add a hacky OPT_ASPECT option type, which only exists to accept
a "no" parameter, which in combination with the "--no-..." handling code
makes --no-video-aspect work again.
We can also remove the code in m_config.c, which only existed to make
"--no-aspect" (a deprecated alias) to work.
OPT_ALIAS redirects the options at a higher level, instead of
introducing "duplicate" options with different name but same backing
storage. This uses the OPT_REPLACED mechanisms - only the deprecation
warning had to be made conditional. Note that e.g. --no-video still
works, because the "--no-..." redirection and OPT_ALIAS are orthogonal.
The deprecated --sub -> --sub-file alias had to be dropped, because it
essentially conflicts with --no-sub. If anyone complains, this could
probably still be undone by letting m_config_find_negation_opt do a
special mapping for --no-sub. (Which would be dumb, but simple and
effective.)
Just a minor refactor along the planned option change. This commit will
make it easier to update (i.e. copy) the VO options without copying
_all_ options. For now, behavior should be equivalent, though.
(The VO options were put into a separate struct quite early - when all
global variables were removed from the source code. It wasn't clear
whether the separate struct would have any actual purpose, but it seems
it will now. Awesome, huh.)
Normally, OSD can be disabled with --osd-level=0. But this also disables
terminal OSD, and some users want _only_ the terminal OSD. Add
--video-osd=no, which essentially disables the video OSD.
Ideally, it should probably be possible to control terminal and video
OSD levels independently, but that would require separate OSD timers
(and other state) for both components, so don't do it. But because the
current situation isn't too ideal, add a threat to the manpage that
might be changed in the future.
Fixes#3387.
The --image-display-duration option controls how long an image is
displayed. It's also possible to display the image forever (until manual
user interaction stops playback).
With this, the core drops the old method to "drain" video (i.e. waiting
for the last frame duration on end of playback). Instead, we reuse
MPContext.time_frame. The old mechanism was disabled for non-images
anyway.
Fixes#3425.
This commit adds an --audio-channel=auto-safe mode, and makes it the
default. This mode behaves like "auto" with most AOs, except with
ao_alsa. The intention is to allow multichannel output by default on
sane APIs. ALSA is not sane as in it's so low level that it will e.g.
configure any layout over HDMI, even if the connected A/V receiver does
not support it. The HDMI fuckup is of course not ALSA's fault, but other
audio APIs normally isolate applications from dealing with this and
require the user to globally configure the correct output layout.
This will help with other AOs too. ao_lavc (encoding) is changed to the
new semantics as well, because it used to force stereo (perhaps because
encoding mode is supposed to produce safe files for crap devices?).
Exclusive mode output on Windows might need to be adjusted accordingly,
as it grants the same kind of low level access as ALSA (requires more
research).
In addition to the things mentioned above, the --audio-channels option
is extended to accept a set of channel layouts. This is supposed to be
the correct way to configure mpv ALSA multichannel output. You need to
put a list of channel layouts that your A/V receiver supports.
mixer.c didn't really deserve to be separate anymore, as half of its
contents were unnecessary glue code after recent changes. It also
created a weird split between audio.c and af.c due to the fact that
mixer.c could insert audio filters. With the code being in audio.c
directly, together with other code that unserts filters during runtime,
it will be possible to cleanup this code a bit and make it work like the
video filter code.
As part of this change, make the balance code work like the volume code,
and add an option to back the current balance value. Also, since the
balance semantics are unexpected for most users (panning between the
audio channels, instead of just changing the relative volume), and there
are some other volumes, formally deprecate both the old property and the
new option.
Drop the code for switching the volume options and properties between
af_volume and AO volume controls. interface-changes.rst mentions the
changes in detail.
Do this because this was exceedingly complex and had other problems as
well. It was also very hard to test. It's just not worth the trouble.
Some leftovers like AOCONTROL_HAS_PER_APP_VOLUME will be removed at a
later point.
Fixes#3322.
This uses the normal autoprobing rules like "auto", but rejects anything
that isn't flagged as copying data back to system memory.
The chunk in command.c was dead code, so remove it instead of updating
it.
Add --taskbar-progress command line option and property which controls taskbar
progress indication rendering in Windows 7+. This option is on by default and
can be toggled during playback.
This option does not affect the creation process of ITaskbarList3. When the
option is turned off the progress bar is just hidden with TBPF_NOPROGRESS.
Closes#2535
The "fs-only" choice sets the _NET_WM_BYPASS_COMPOSITOR to 1 if the
window is fullscreened, and 0 otherwise. (0 is specified to be the
implicit default - i.e. no change is requested in windowed mode.)
In particular, change the default to "fs-only".
Fixes#2582.
Flag that is set by default. Reseting it will result in mpv trying to fit
client area with video instead of the whole window with border and
decorations on the screen.
Marked as (Windows only) for now until it's implemented on other platforms.
--sub-ass=no / --ass=no still work, but --ass-style-override=strip is
preferred now. With this change, --ass-style-override can control all
the types of style overriding.
This uses ID3D11VideoProcessor to convert the video to a RGBA surface,
which is then bound to ANGLE. Currently ANGLE does not provide any way
to bind nv12 surfaces directly, so this will have to do.
ID3D11VideoContext1 would give us slightly more control about the
colorspace conversion, though it's still not good, and not available
in MinGW headers yet.
The video processor is created lazily, because we need to have the coded
frame size, of which AVFrame and mp_image have no concept of. Doing the
creation lazily is less of a pain than somehow hacking the coded frame
size into mp_image.
I'm not really sure how ID3D11VideoProcessorInputView is supposed to
work. We recreate it on every frame, which is simple and hopefully
doesn't affect performance.
