Set the flag CODEC_FLAG_OUTPUT_CORRUPT by default. Note that there is
also CODEC_FLAG2_SHOW_ALL, which is older, but this seems to be ffmpeg
only.
Note that whether you want this enabled depends on the user. Some might
prefer that only good frames are output, while others want the decoder
to try as hard as possible to output _anything_. Since mplayer/mpv is
rather the kind of player that tries hard instead of being "clever", set
the new default to override libavcodec's default.
A nice way to test this is switching video tracks. Since mpv doesn't
wait for the next key frame, it'll start feeding the decoder with a
packet from the middle of the stream.
This ended up a little bit messy. In order to get a mp_log everywhere,
mostly make use of the fact that va_surface already references global
state anyway.
In my opinion, config.h inclusions should be kept to a minimum. MPlayer
code really liked including config.h everywhere, though, even in often
used header files. Try to reduce this.
Since m_option.h and options.h are extremely often included, a lot of
files have to be changed.
Moving path.c/h to options/ is a bit questionable, but since this is
mainly about access to config files (which are also handled in
options/), it's probably ok.
The tmsg stuff was for the internal gettext() based translation system,
which nobody ever attempted to use and thus was removed. mp_gtext() and
set_osd_tmsg() were also for this.
mp_dbg was once enabled in debug mode only, but since we have log level
for enabling debug messages, it seems utterly useless.
This code tried to pass a still monotonic (even if not strictly
monotonic) PTS to the player, but as a result it remained stuck on
the PTS before a reset (since the PTS was lower).
Until now, the player didn't care to drain frames on video reconfig.
Instead, the VO was reconfigured (i.e. resized) before the queued frames
finished displaying. This can for example be observed by passing
multiple images with different size as mf:// filename. Then the window
would resize one frame before image with the new size is displayed. With
--vo=vdpau, the effect is worse, because this VO queues more than 1
frame internally.
Fix this by explicitly draining buffered frames before video reconfig.
Raise the display time of the last frame. Otherwise, the last frame
would be shown for a very short time only. This usually doesn't matter,
but helps when playing image files. This is a byproduct of frame
draining, because normally, video timing is based on the frames queued
to the VO, and we can't do that with frames of different size or format.
So we pretend that the frame before the change is the last frame in
order to time it. This code is incorrect though: it tries to use the
framerate, which often doesn't make sense. But it's good enough to test
this code with mf://.
This should help fixing some issues (like not draining video frames
correctly on reinit), as well as decoupling the decoder, filter chain,
and VO code.
I also wanted to make the hardware video decoding fallback work properly
if software-only video filters are inserted. This currently has the
issue that the fallback is too violent, and throws away a bunch of
demuxer packets needed to restart software decoding properly. But
keeping "backup" packets turned out as too hacky, so I'm not doing this,
at least not yet.
This adds vf_chain, which unlike vf_instance refers to the filter chain
as a whole. This makes the filter API less awkward, and will allow
handling format negotiation better.
The --flip option flipped the image upside-down, by trying to use VO
support, or if not available, by inserting a video filter. I'm not sure
why it existed. Maybe it was important in ancient times when VfW based
decoders output an image this way (but even then, flipping an image is a
free operation by negating the stride).
One nice thing about this is that it provided a possible path for
implementing video orientation, which is a feature we should probably
support eventually. The important part is that it would be for free for
VOs that support it, and would work even with hardware decoding.
But for now get rid of it. It's useless, trivial, stands in the way, and
supporting video orientation would require solving other problems first.
If the timebase is set, it's used for converting the packet timestamps.
Otherwise, the previous method of reinterpret-casting the mpv style
double timestamps to libavcodec style int64_t timestamps is used.
Also replace the kind of awkward mp_get_av_frame_pkt_ts() function by
mp_pts_from_av(), which simply converts timestamps in a way the old
function did. (Plus it takes a timebase parameter, similar to the
addition to mp_set_av_packet().)
Note that this should not change anything yet. The code in ad_lavc.c and
vd_lavc.c passes NULL for the timebase parameters. We could set
AVCodecContext.pkt_timebase and use that if we want to give libavcodec
"proper" timestamps.
This could be important for ad_lavc.c: some codecs (opus, probably mp3
and aac too) have weird requirements about doing decoding preroll on the
container level, and thus require adjusting the audio start timestamps
in some cases. libavcodec doesn't tell us how much was skipped, so we
either get shifted timestamps (by the length of the skipped data), or we
give it proper timestamps. (Note: libavcodec interprets or changes
timestamps only if pkt_timebase is set, which by default it is not.)
This would require selecting a timebase though, so I feel uncomfortable
with the idea. At least this change paves the way, and will allow some
testing.
The harder work was done in the previous commits. After that this feature comes
out almost for free.
The only problem is I can't get the textures created with CGLTexImageIOSurface2D
to download properly, thus the code performs download using some CoreVideo APIs.
If someone knows why download of textures created with CGLTexImageIOSurface2D
doesn't work please contact me :)
PIX_FMT_* -> AV_PIX_FMT_* (except some pixdesc constants)
enum PixelFormat -> enum AVPixelFormat
Losen some version checks in certain newer pixel formats.
av_pix_fmt_descriptors -> av_pix_fmt_desc_get
This removes support for FFmpeg 1.0.x, which is even older than
Libav 9.x. Support for it probably was already broken, and its
libswresample was rejected by our build system anyway because it's
broken.
Mostly untested; it does compile with Libav 9.9.
The old ffmpeg vdpau support code uses separate vdpau pixel formats for
each decoder (pretty much because mplayer's architecture sucked), which
just gets into the way. Force the old decoder's output to IMGFMT_VDPAU,
and remove IMGFMT_IS_VDPAU() where we can remove it.
This should completely remove the differences betwene the old and new
vdpau decoder outside of the decoder.
PIX_FMT_VDA_VLD and PIX_FMT_VAAPI_VLD were never used anywhere. I'm not
sure why they were even added, and they sound like they are just for
compatibility with XvMC-style decoding, which sucks anyway.
Now that there's only a single vaapi format, remove the
IMGFMT_IS_VAAPI() macro. Also get rid of IMGFMT_IS_VDA(), which was
unused.
pthreads should be available anywhere. Even if not, for environment
without threads a pthread wrapper could be provided that can't actually
start threads, thus disabling features that require threads.
Make pthreads mandatory in order to simplify build dependencies and to
reduce ifdeffery. (Admittedly, there wasn't much complexity, but maybe
we will use pthreads more in the future, and then it'd become a real
bother.)
So, FFmpeg/Libav requires us to figure out video timestamps ourselves
(see last 10 commits or so), but the methods it provides for this aren't
even sufficient. In particular, everything that uses AVI-style DTS (avi,
vfw-muxed mkv, possibly mpeg4-in-ogm) with a codec that has an internal
frame delay is broken. In this case, libavcodec will shift the packet-
to-image correspondence by the codec delay, meaning that with a delay=1,
the first AVFrame.pkt_dts is not 0, but that of the second packet. All
timestamps will appear shifted. The start time (e.g. the time displayed
when doing "mpv file.avi --pause") will not be exactly 0.
(According to Libav developers, this is how it's supposed to work; just
that the first DTS values are normally negative with formats that use
DTS "properly". Who cares if it doesn't work at all with very common
video formats? There's no indication that they'll fix this soon,
either. An elegant workaround is missing too.)
Add a hack to re-enable the old PTS code for AVI and vfw-muxed MKV.
Since these timestamps are not reorderd, we wouldn't need to sort them,
but it's less code this way (and possibly more robust, should a demuxer
unexpectedly output PTS).
The original intention of all the timestamp changes recently was
actually to get rid of demuxer-specific hacks and the old timestamp
sorting code, but it looks like this didn't work out. Yet another case
where trying to replace native MPlayer functionality with FFmpeg/Libav
led to disadvantages and bugs. (Note that the old PTS sorting code
doesn't and can't handle frame dropping correctly, though.)
Bug reports:
https://trac.ffmpeg.org/ticket/3178https://bugzilla.libav.org/show_bug.cgi?id=600
Using --start with files that use DTS only, or which simply have broken
PTS timestamps, would incorrectly drop frames and possibly not execute
the seek correctly.
Add yet another heuristic to detect this. The intent is that --start and
hr-seeks in general should work correctly, but in order to keep things
fast, we still want to allow frame dropping during hr-seek if there are
no problems doing so. Do this by disabling frame dropping by default,
but re-enabling it if there are no problems found for a while. As a
consequence, --start might be somewhat slower, but normal user
interaction should remain as fast as before.
Note that there's something subtle about the added code: the
has_broken_packet_pts field is checked even before the first packet is
fed to dec_video.c, so the field must not be set to 0 right on start.
It's not initially set to 0 anyway, because the heuristic requires
decoding some images before enabling frame drop anyway.
Note 2: it's not clear whether frame dropping during hr-seek really
helps; I didn't benchmark it.
The d_video->pts field was a bit strange. The code overwrote it multiple
times (on decoding, on filtering, then once again...), and it wasn't
really clear what purpose this field had exactly. Replace it with the
mpctx->video_next_pts field, which is relatively unambiguous.
Move the decreasing PTS check to dec_video.c. This means it acts on
decoder output, not on filter output. (Just like in the previous commit,
assume the filter chain is sane.) Drop the jitter vs. reset semantics;
the dec_video.c determined PTS never goes backwards, and demuxer
timestamps don't "jitter".
Also get rid of the PTS check _after_ filters. This means if there's a
video filter which unsets PTS, no warning will be printed. But we assume
that all filters are well-behaved enough by now.
Refactor the PTS handling code to make it cleaner, and to separate the
bits that use PTS sorting.
Add a heuristic to fall back to DTS if the PTS us non-monotonic. This
code is based on what FFmpeg/Libav use for ffplay/avplay and also
best_effort_timestamp (which is only in FFmpeg). Basically, this 1. just
uses the DTS if PTS is unset, and 2. ignores PTS entirely if PTS is non-
monotonic, but DTS is sorted.
The code is pretty much the same as in Libav [1]. I'm not sure if all of
it is really needed, or if it does more than what the paragraph above
mentions. But maybe it's fine to cargo-cult this.
This heuristic fixes playback of mpeg4 in ogm, which returns packets
with PTS==DTS, even though the PTS timestamps should follow codec
reordering. This is probably a libavformat demuxer bug, but good luck
trying to fix it.
The way vd_lavc.c returns the frame PTS and DTS to dec_video.c is a bit
inelegant, but maybe better than trying to mess the PTS back into the
decoder callback again.
[1] https://git.libav.org/?p=libav.git;a=blob;f=cmdutils.c;h=3f1c667075724c5cde69d840ed5ed7d992898334;hb=fa515c2088e1d082d45741bbd5c05e13b0500804#l1431
These used the suffix _resync_stream, which is a bit misleading. Nothing
gets "resynchronized", they really just reset state.
(Some audio decoders actually used to "resync" by reading packets for
resuming playback, but that's not the case anymore.)
Also move the function in dec_video.c to the top of the file.
This means the code that tries to figure out the timestamp from
demuxer and decoder output is now all in dec_video.c. We set the
final timestamp on the returned image (mp_image.pts), as well as
the d_video->pts field.
The way the player uses d_video->pts field is still a bit messy. Maybe
this could be cleaned up later.
It appears PTS sorting was useful only for avi files (and VfW-muxed
mkv). Maybe it was historically also important for decoders with broken
or non-existent PTS reordering (win32 codecs?). But now that we handle
demuxers which outputs DTS only correctly, it just seems dead weight.
Disable it by default. The --pts-association-mode option is now forced
to always use the decoder's PTS value. You can still enable the old
default (auto) or force sorting. But we will probably remove this option
entirely at some point.
Make demux_mkv export timestamps at DTS when it's in VfW mode. This is
needed to get correct timestamps with the new default mode. demux_lavf
already does that.
Having the DTS directly can be useful for restoring PTS values.
The avi file format doesn't actually store PTS values, just DTS. An
older hack explicitly exported the DTS as PTS (ignoring the [I assume]
genpts generated non-sense PTS), which is not necessary anymore due to
this change.
Now the --no-correct-pts mode is like the normal mode, just with
different timestamp calculations. The semantics should be about the
same as before this commit.
Before this commit, this mode estimated the frame time by subtracting
successive packet PTS values. This is complete non-sense for video
codecs which use reordering. The code compensated frame times for these
non-sense using the FPS value, but confused the rest of the player with
non-sense jumping around timestamps. So, all in all this mode is not
very useful.
Repurpose this mode for fixed frame rate playback. This gives almost the
same behavior as the old mode with forced framerate (--fps option). The
result is simpler and often more robust.
Instead of passing the PTS as separate field, pass it as part of the
usual data structures. Basically, this removes strange artifacts from
the API. (It's not finished, though: the final decoded PTS goes through
strange paths, and filter_video() finally overwrites the decoded
mp_image's pts field with it.)
We also stop using libavcodec's reordered_opaque fields, and use
AVPacket.pts and AVFrame.pkt_pts. This is slightly unorthodox, because
these pts fields are not "really" opaque anymore, yet we treat them as
such. But the end result should be the same, and reordered_opaque is
marked as partially deprecated (it's not clear whether it's really
deprecated).
When mpv is started with some video filters set (--vf is used), and
hardware decoding is requested, and hardware decoding would be possible,
but is prevented due to video filters that accept software formats only,
the fallback didn't work properly sometimes.
This fallback works rather violently: it tries to initialize the filter
chain, and if it fails it throws away the frame decoded using the
hardware, and retries with software. The case that didn't work was when
decoding the current packet didn't immediately lead to a new frame. Then
the filter chain wouldn't be reinitialized, and the playloop would stop
playback as soon as it encounters the error flag.
Fix this by resetting the filter error flag (back to "uninitialized"),
which is a rather violent, but somewhat working solution.
The fallback in general should perhaps be cleaned up later.
If the --fps option was given (MPOpts->force_fps), the demuxer FPS value
was overwritten with the forced value. This was fine, since the demuxer
value wasn't needed anymore. But with the recent changes not to write to
the demuxer stream headers, we don't want to do this anymore. So
maintain the (forced/updated) FPS value in dec_video->fps.
The removed code in loadfile.c is probably redundant, and an artifact
from past refactorings.
Note that sub.c will now always use the demuxer FPS value, instead of
the user override value. I think this is fine, because it used the
demuxer's video size values too. (And it's rare that these values are
used at all.)
Now the actual decoder doesn't need to care about this anymore, and it's
handled in generic code instead. This simplifies vd_lavc.c, and in
particular we don't need to detect format changes in the old way
anymore.
The only reason why these structs were dynamically allocated was to
avoid recursive includes in stheader.h, which is (or was) a very central
file included by almost all other files. (If a struct is referenced via
a pointer type only, it can be forward referenced, and the definition of
the struct is not needed.) Now that they're out of stheader.h, this
difference doesn't matter anymore, and the code can be simplified.
Also sneak in some sanity checks.
wm4
Stefano Pigozzi