This was excessively useless, and I want my time back that was needed to
explain users why they don't want to use it.
It captured the byte stream only, and even for types of streams it was
designed for (like transport streams), it was rather questionable.
As part of the removal, un-inline demux_run_on_thread() (which has only
1 call-site now), and sort of reimplement --stream-dump to write the
data directly instead of using the removed capture code.
(--stream-dump is also very useless, and I struggled coming up with an
explanation for it in the manpage.)
Since for mpv CLI, the player state is a singleton, full prefetching is
a bit tricky. We do it only on the demuxer layer.
The implementation reuses the old "open thread". This means there is
significant potential for regressions even if the new option is not
used. This is made worse by the fact that I barely tested this code.
The generic mpctx_run_reentrant() wrapper is also removed - this was its
only user, and its remains become part of the new implementation.
As preparation for file prefetching, we basically have to get rid of
using mpctx->playback_abort for the main demuxer (i.e. the thing that
can be prefetched). It can't be changed on a running demuxer, and always
using the same cancel handle would either mean aborting playback would
also abort prefetching, or that playback can't be aborted anymore.
Make this more flexible with some refactoring.
Thi is a quite shitty solution if you ask me, but YOLO.
This does 3 kinds of changes:
- change sleeptime=x to mp_set_timeout()
- change sleeptime=0 to mp_wakeup_core() calls (to be more explicit)
- change commands etc. to call mp_wakeup_core() if they do changes that
require the playloop to be rerun
This is preparation for the following changes. The goal is to process
client API requests without having to rerun the playloop every time. As
of this commit, the changes should not change behavior. In particular,
the playloop is still implicitly woken up on every command.
Currently, calling mp_input_wakeup() will wake up the core thread (also
called the playloop). This seems odd, but currently the core indeed
calls mp_input_wait() when it has nothing more to do. It's done this way
because MPlayer used input_ctx as central "mainloop".
This is probably going to change. Remove direct calls to this function,
and replace it with mp_wakeup_core() calls. ao and vo are changed to use
opaque callbacks and not use input_ctx for this purpose. Other code
already uses opaque callbacks, or has legitimate reasons to use
input_ctx directly (such as sending actual user input).
This has all been made unnecessary recently. The change not to copy the
global option struct in particular can be made because now nothing
accesses the global options anymore in the demux and stream layers.
Some code that was accidentally added/changed in commit 5e30e7a0 is also
removed, because it was simply committed accidentally, and was never
used.
The way option runtime changes are handled is pretty bad in the current
codebase. There's a big option struct (MPOpts), which contains almost
everything, and for which no synchronization mechanism exists. This was
handled by either making some options read-only after initialization,
duplicating the option struct, using sub-options (in the VO), and so on.
Introduce a mechanism that creates a copy of the global options (or
parts of it), and provides a well-defined way to update them in a
thread-safe way.
Most code can remain the same, just that all the component glue code has
to explicitly make use of it first.
There is still lots of room for improvement. For example, the update
mechanism could be better.
If the win32 taskbar progress update is sent before the VO window is
created, then w32_common.c will ignore it because the actual taskbar
object was not created yet. (At least this is what I suspect happens.
The window is already created at this point, but not mapped.)
Hopefully fix this is fixed by creating until after the window is
created, i.e. the VO has been configured at least once.
Untested (who wants to boot into Windows just to wait until it has
applied all of its stupid updates).
Also not explicit is whether update_vo_playback_state() will actually be
called soon enough in all cases. It probably is.
Probably fixes#3482.
Just a minor refactor along the planned option change. This commit will
make it easier to update (i.e. copy) the VO options without copying
_all_ options. For now, behavior should be equivalent, though.
(The VO options were put into a separate struct quite early - when all
global variables were removed from the source code. It wasn't clear
whether the separate struct would have any actual purpose, but it seems
it will now. Awesome, huh.)
Doing this required synchronizing with the VO thread, which could lead
to audio dropouts if the VO was frozen (which can happen in practice if
e.g. an opengl_cb user is not doing what the API demands).
Add a way to send asynchronous VOCTRLs, and use that for the playback
state. In theory, it would be better to make this status update a
several function and to "merge" several queued update, but that would be
slightly more effort/code, and the update is so infrequent that the
merging would never happen anyway.
The change to vo_destroy() is to make sure all queued asynchronous
reuqests are finished before making the vo_thread exit.
Even though it's only used on MS Windows, it's run on any platform with
any VO, which makes this worse.
This affects A-B loops and --loop-file, and audio. Instead of dropping
audio by resetting the AO, try to make it seamless by not sending data
after the loop point, and after the seek send new data without a reset.
Assume you use a large value like --audio-delay=20. Then until now the
player would just have seeked normally to a "too late" position, and
played silence for about 20 seconds until audio in the correct time
range is coming again.
Change this by offsetting seeks by the right amount. This works for both
external and muxed files. If a seek isn't precise, then it works only
for external files.
This might cause issues with very large delay options. Hr-seek skipping
could take a lot of time (especially because it affects video too), the
demuxer queue could overflow, and other weird corner cases could appear.
But we just try this on best-effort basis, and if the user uses extreme
values we don't guarantee good behavior.
Add --taskbar-progress command line option and property which controls taskbar
progress indication rendering in Windows 7+. This option is on by default and
can be toggled during playback.
This option does not affect the creation process of ITaskbarList3. When the
option is turned off the progress bar is just hidden with TBPF_NOPROGRESS.
Closes#2535
Instead of having a separate for each, which also requires separate
additional caching in the demuxer. (The demuxer adds an indirection,
since STREAM_CTRLs are not thread-safe.)
Since this includes the cache speed, this should fix#3003.
track can't be NLUL at this point, so the if is redundant. Remove it and
unindent the block. Also, make the function check whether the track is
selected at all, which makes it safer and idempotent.
This covers source files which were added in mplayer2 and mpv times
only, and where all code is covered by LGPL relicensing agreements.
There are probably more files to which this applies, but I'm being
conservative here.
A file named ao_sdl.c exists in MPlayer too, but the mpv one is a
complete rewrite, and was added some time after the original ao_sdl.c
was removed. The same applies to vo_sdl.c, for which the SDL2 API is
radically different in addition (MPlayer supports SDL 1.2 only).
common.c contains only code written by me. But common.h is a strange
case: although it originally was named mp_common.h and exists in MPlayer
too, by now it contains only definitions written by uau and me. The
exceptions are the CONTROL_ defines - thus not changing the license of
common.h yet.
codec_tags.c contained once large tables generated from MPlayer's
codecs.conf, but all of these tables were removed.
From demux_playlist.c I'm removing a code fragment from someone who was
not asked; this probably could be done later (see commit 15dccc37).
misc.c is a bit complicated to reason about (it was split off mplayer.c
and thus contains random functions out of this file), but actually all
functions have been added post-MPlayer. Except get_relative_time(),
which was written by uau, but looks similar to 3 different versions of
something similar in each of the Unix/win32/OSX timer source files. I'm
not sure what that means in regards to copyright, so I've just moved it
into another still-GPL source file for now.
screenshot.c once had some minor parts of MPlayer's vf_screenshot.c, but
they're all gone.
Makes the next commit simpler. It's probably a bad idea to add more
fields to the global state, but on the other hand the client API state
is pretty much per-instance anyway. It also will help with things like
the proposed libmpv custom stream API.
This slightly changes behavior when seeking with external audio/subtitle
tracks if transport streams and mpeg files are played, as well as
behavior when seeking with such external tracks.
get_main_demux_pts() is evil because it always blocks on the demuxer (if
there isn't already a packet queued). Thus it could lock up the player,
which is a shame because all other possible causes have been removed.
The reduced "precision" when seeking in the ts/mpeg cases (where
SEEK_FACTOR is used, resulting in byte seeks instead of timestamp seeks)
might lead to issues. We should probably drop this heuristic. (It was
introduced because there is no other way to seek in files with PTS
resets with libavformat, but its value is still questionable.)
The demuxer infrastructure was originally single-threaded. To make it
suitable for multithreading (specifically, demuxing and decoding on
separate threads), some sort of tripple-buffering was introduced. There
are separate "struct demuxer" allocations. The demuxer thread sets the
state on d_thread. If anything changes, the state is copied to d_buffer
(the copy is protected by a lock), and the decoder thread is notified.
Then the decoder thread copies the state from d_buffer to d_user (again
while holding a lock). This avoids the need for locking in the
demuxer/decoder code itself (only demux.c needs an internal, "invisible"
lock.)
Remove the streams/num_streams fields from this tripple-buffering
schema. Move them to the internal struct, and protect them with the
internal lock. Use accessors for read access outside of demux.c.
Other than replacing all field accesses with accessors, this separates
allocating and adding sh_streams. This is needed to avoid race
conditions. Before this change, this was awkwardly handled by first
initializing the sh_stream, and then sending a stream change event. Now
the stream is allocated, then initialized, and then declared as
immutable and added (at which point it becomes visible to the decoder
thread immediately).
This change is useful for PR #2626. And eventually, we should probably
get entirely of the tripple buffering, and this makes a nice first step.
Use the demux_set_ts_offset() added in the previous commit to base each
timeline segment to use timestamps according to its relative position
within the overall timeline. As a consequence we don't need to care
about these timestamps anymore, and everything becomes simpler.
(Another minor but delicious nugget of sanity.)
Most of this is explained in the DOCS additions.
This gives us slightly more sanity, because there is less interaction
between the various parts. The goal is getting rid of the video_offset
entirely.
The simplification extends to the user API. In particular, we don't need
to fix missing parts in the API, such as the lack for a seek command
that seeks relatively to the start time. All these things are now
transparent.
(If someone really wants to know the real timestamps/start time, new
properties would have to be added.)
This adds support for the progress indicator taskbar extension
that was introduced with Windows 7 and Windows Server 2008 R2.
I don’t like this solution because it keeps its own state and
introduces another VOCTRL, but I couldn’t come up with anything
less messy.
closes#2399
This is a real pain: if a quit command is received, it's set to PT_QUIT.
And then other code could overwrite it, making it not quit. The annoying
bit is that stop_play is written and read in many places. Just not
overwriting it unconditionally seems to be the best course of action.
The final goal is making opening the demuxer and opening the stream the
same operation.
Stream dumping is a rather uninteresting feature, but has a small
number of vocal users, and it's easy to keep.
These functions do blocking work on a separate thread, but wait until
they return. So they are not async or non-blocking. But they do react to
user-input and client API accesses, which makes them reentrant.
This is probably what libmpv users want; and it also improves error
reporting (or we'd have to add a way to communicate such mid-playback
failures as events).
The player was supposed to exit playback if both video and audio failed
to initialize (or if one of the streams was not selected when the other
stream failed). This didn't work; for one this check was missing from
one of the failure paths. And more importantly, both checked the
current_track array incorrectly.
Fix these issues, and move the failure handling code into a common
function.
CC: @mpv-player/stable
Especially with other components (libavcodec, OSX stuff), the thread
list can get quite populated. Setting the thread name helps when
debugging.
Since this is not portable, we check the OS variants in waf configure.
old-configure just gets a special-case for glibc, since doing a full
check here would probably be a waste of effort.
Run opening the stream and opening the demuxer in a separate thread.
This should remove the last code paths in which the player can normally
get blocked on network.
When the stream is opened, the player will still react to input and so
on. Commands to abort opening can also be handled properly, instead of
using some of the old hacks in input.c. The only thing the user can
really do is aborting loading by navigating the playlist or quitting.
Whether playback abort works depends on the stream implementation; with
normal network, this will depend on what libavformat (via "interrupt"
callback) does.
Some pain is caused by DVD/BD/DVB. These want to reload the demuxer
sometimes. DVB wants it in order to discard old, inactive streams.
DVD/BD for the same reason, and also for reloading stream languages
and similar metadata. This means the stream and the demuxer have to
be loaded separately.
One minor detail is that we now need to copy all global options. This
wasn't really needed before, because the options were accessed on
opening only, but since opening is now on a separate thread, this
obviously becomes a necessity.
Continues commit 348dfd93. Replace other places where input was manually
fetched with common code.
demux_was_interrupted() was a weird function; I'm not entirely sure
about its original purpose, but now we can just replace it with simpler
code as well. One difference is that we always look at the command
queue, rather than just when cache initialization failed. Also, instead
of discarding all but quit/playlist commands (aka abort command), run
all commands. This could possibly lead to unwanted side-effects, like
just ignoring commands that have no effect (consider pressing 'f' for
fullscreen right on start: since the window is not created yet, it would
get discarded). But playlist navigation still works as intended, and
some if not all these problems already existed before that in some
forms, so it should be ok.
Apparently users prefer this behavior.
It was used for subtitles too, so move the code to calculate the video
offset into a separate function. Seeking also needs to be fixed.
Fixes#1018.
The VO is run inside its own thread. It also does most of video timing.
The playloop hands the image data and a realtime timestamp to the VO,
and the VO does the rest.
In particular, this allows the playloop to do other things, instead of
blocking for video redraw. But if anything accesses the VO during video
timing, it will block.
This also fixes vo_sdl.c event handling; but that is only a side-effect,
since reimplementing the broken way would require more effort.
Also drop --softsleep. In theory, this option helps if the kernel's
sleeping mechanism is too inaccurate for video timing. In practice, I
haven't ever encountered a situation where it helps, and it just burns
CPU cycles. On the other hand it's probably actively harmful, because
it prevents the libavcodec decoder threads from doing real work.
Side note:
Originally, I intended that multiple frames can be queued to the VO. But
this is not done, due to problems with OSD and other certain features.
OSD in particular is simply designed in a way that it can be neither
timed nor copied, so you do have to render it into the video frame
before you can draw the next frame. (Subtitles have no such restriction.
sd_lavc was even updated to fix this.) It seems the right solution to
queuing multiple VO frames is rendering on VO-backed framebuffers, like
vo_vdpau.c does. This requires VO driver support, and is out of scope
of this commit.
As consequence, the VO has a queue size of 1. The existing video queue
is just needed to compute frame duration, and will be moved out in the
next commit.
If you for example use --audio-file, disable the external track, seek,
and enable the external track again, the playback position of the
external file was off, and you would get major A/V desync. This was
actually supposed to work, but broke at some time ago (probably commit
2b87415f). It didn't work, because it attempted to seek the stream if it
was already selected, which was always true due to
reselect_demux_streams() being called before that.
Fix by putting the initial selection and the seek together.
This adds a thread to the demuxer which reads packets asynchronously.
It will do so until a configurable minimum packet queue size is
reached. (See options.rst additions.)
For now, the thread is disabled by default. There are some corner cases
that have to be fixed, such as fixing cache behavior with webradios.
Note that most interaction with the demuxer is still blocking, so if
e.g. network dies, the player will still freeze. But this change will
make it possible to remove most causes for freezing.
Most of the new code in demux.c actually consists of weird caches to
compensate for thread-safety issues (with the previously single-threaded
design), or to avoid blocking by having to wait on the demuxer thread.
Most of the changes in the player are due to the fact that we must not
access the source stream directly. the demuxer thread already accesses
it, and the stream stuff is not thread-safe.
For timeline stuff (like ordered chapters), we enable the thread for the
current segment only. We also clear its packet queue on seek, so that
the remaining (unconsumed) readahead buffer doesn't waste memory.
Keep in mind that insane subtitles (such as ASS typesetting muxed into
mkv files) will practically disable the readahead, because the total
queue size is considered when checking whether the minimum queue size
was reached.
Stop using it in most places, and prefer STREAM_CTRL_GET_SIZE. The
advantage is that always the correct size will be used. There can be no
doubt anymore whether the end_pos value is outdated (as it happens often
with files that are being downloaded).
Some streams still use end_pos. They don't change size, and it's easier
to emulate STREAM_CTRL_GET_SIZE using end_pos, instead of adding a
STREAM_CTRL_GET_SIZE implementation to these streams.
Make sure int64_t is always used for STREAM_CTRL_GET_SIZE (it was
uint64_t before).
Remove the seek flags mess, and replace them with a seekable flag. Every
stream must set it consistently now, and an assertion in stream.c checks
this. Don't distinguish between streams that can only be forward or
backwards seeked, since we have no such stream types.
wm4
maniak1349
Dmitrij D. Czarkoff
James Ross-Gowan
Martin Herkt
Marcin Kurczewski
Andrey Morozov
Tsukasa OMOTO