vf_vdpaupp crashed on certain files (with --hwdec=vdpau --deinterlace).
This happened for example with mpeg2 files, which for some reason
typically contain some AVFrame side data. It turns out the last change
in 55c88fdb8f was not quite clean, and forgot the special cases in
mp_image_new_dummy_ref(). This function is supposed to copy all metadata
from the argument passed, except buffer refs. But there were new buffer
refs, that were not cleared properly. Also, the ff_side_data pointer
must be cleared, or the new mp_image would try to free it on
destruction.
The bottom line is that mp_image_new_dummy_ref() is a pretty bad idea,
and I suppose all callers with non-NULL arguments should be changed to
create a blank mp_image, and copy frame properties as needed (this
includes callers of mp_image_new_custom_ref()).
Fixes#5630.
Useful for libavfilter. Somewhat risky, because we can't ensure the
consistency of the unknown side data (but this is a general problem with
side data, and libavfilter filters will usually get it wrong too _if_
there are conflict cases).
Fixes#5569.
We must not create new references herem because mp_image_new_ref() is
called later, and actually creates new references (including doing
actual error checking). Blame C, not me.
This is preparation for a change in vd_lavc.c: it should not have to
access the demuxer (to pass along closed captions), so the idea is to
make them part of mp_image, and to let the layer above vd_lavc propagate
the buffer.
Don't bother with preserving them for mp_image->AVFrame, because we
don't need this.
Reduce the trivial but still annoying code duplication in
mp_image_new_ref(), which has to create new buffer references and deal
with possible failure of creating them. The tricky part is that if
creating a reference fails, we must set the target to NULL, so that
unreferencing the failed new mp_image reference does not release the
buffer references of the original mp_image. For the same reason, the
code can't jump to error handling when it can't create a new reference,
and has to set a flag instead.
This fixes that AVFrames passing through libavfilter (such as with
--lavfi-complex) implicitly stripped some fields. I'm not actually sure
what to do with the mp_image_params.color.light field here (what happens
if the colorspace changed?) - there is no equivalent in AVFrame or
FFmpeg at all.
It did not affect the old --vf code, because it doesn't allow
libavfilter to change the metadata.
Also log the .light field in verbose mode.
This is where it should be. It only wasn't because of an old libavcodec
bug, that returned the side data only on every IDR. This required some
sort of caching, which is now dropped. (mp_image wouldn't have been able
to do this kind of caching, because this code is stateless.) We don't
support these old libavcodec versions anymore, which is why this is not
needed anymore.
Also move initialization of rotation/stereo stuff to dec_video.c.
The mechanism introduced in b135af6842 assumed AVHWFramesContext would
be enough. Apparently it's not - the intended use with Rockchip (not
Rokchip btw.) requires accessing actual frame data in order to access
the AVDRMFrameDescriptor struct.
Just pass the entire mp_image to the new function. This is more
flexible, although it slightly worries me that it will be less reusable
for things which require setting up mp_image_params before any real
frames are processed (such as filters).
The same should happen with any other side data that matters to mpv,
otherwise filters will drop it.
(No, don't try to argue that mpv should use AVFrame. That won't work.)
ffmpeg_garbage() is copy&paste from frame_new_side_data() in FFmpeg
(roughly feed201849b8f91), because it's not public API. The name
reflects my opinion about FFmpeg's API.
In mp_image_to_av_frame(), change the too-fragile
*new_ref = (struct mp_image){0};
into explicitly zeroing out the fields that are "transferred" to the
created AVFrame.
Merge mp_image_copy_fields_to_av_frame() into mp_image_from_av_frame(),
same for the other direction.
There isn't any good reason to keep them separate, and the refcounting
handling makes it only more awkward.
It seems this will be useful for Rokchip DRM hwcontext integration.
DRM hwcontexts have additional internal structure which can be different
depending on the decoder, and which is not part of the generic hwcontext
API. Rockchip has 1 layer, which EGL interop happens to translate to a
RGB texture, while VAAPI (mapped as DRM hwcontext) will use multiple
layers. Both will use sw_format=nv12, and thus are indistinguishable on
the mp_image_params level. But this is needed to initialize the EGL
mapping and the vo_gpu video renderer correctly.
We hope that the layer count is enough to tell whether EGL will
translate the data to a RGB texture (vs. 2 texture resembling raw nv12
data). For that we introduce MP_IMAGE_HW_FLAG_OPAQUE.
This commit adds the flag, infrastructure to set it, and an "example"
for D3D11.
The D3D11 addition is quite useless at this point. But later we want to
get rid of d3d11_update_image_attribs() anyway, while we still need a
way to force d3d11vpp filter insertion, so maybe it has some
justification (who knows). In any case it makes testing this easier.
Obviously it also adds some basic support for triggering the opaque
format for decoding, which will use a driver-specific format, but which
is not supported in shaders. The opaque flag is not used to determine
whether d3d11vpp needs to be inserted, though.
If the chroma location is missing, vo_gpu will use centered chroma.
Select a better chroma location by default: normally, it will always be
MPEG video chroma location. If full levels are used, use JPEG chroma
location, because that sort of sounds like it could make sense as it
might coincide with JPEG being decoded.
See e.g. #4804.
Now you need FFmpeg git, or something.
This also gets rid of the last real use of gpu_memcpy(). libavutil does
that itself. (vaapi.c still used it, but it was essentially unused,
because the code path isn't really in use anymore. It wasn't even
included due to the d3d-hwaccel dependency in wscript.)
See "Copyright" file for caveats.
This changes the remaining "almost LGPL" files to LGPL, because we think
that the conditions the author set for these was finally fulfilled.
This is "wrong", because you might want mp_image_copy_attributes() to
preserve the information that the colorspace parameters are unknown.
This is important for hwdec -copy modes, which call this function before
fix_image_params() and mp_colorspace_merge() are called.
Instead, just wipe the colorspace attributes if the pixel format changes
in an apparently incompatible way. Use mp_image_params_guess_csp() logic
for this and factor that into its own function.
mp_image_set_attributes() attempts to do something similar, so change
that in the same way. Also, mp_image_params_guess_csp() just returned if
the imgfmt was invalid or unset - just remove that part, because it
annoyingly doesn't fit into the new code, and had little reason to exist
to begin with. (Probably.)
I see no reason not to do this. I think the check comes from the time
when mp_image stored the image aspect ratio, instead of the pixel aspect
ratio, where the logic might have made more sense.
It was noticed that -copy hwdec modes typically dropped the
chroma_location field. This happened because the attributes on hw
download are copied with mp_image_copy_attributes(), which tries to copy
these parameters only if src and dst were both YUV (in an attempt to
copy parameters only if it makes sense).
But hardware formats did not have the YUV flag set (anymore?), and code
shouldn't attempt to check the flag in this way anyway. Drop the check,
and always copy the whole color metadata struct. There is a call to
mp_image_params_guess_csp() below, which tries to unset nonsense
metadata if it was copied from a YUV format to RGB. This function would
also do the right thing for hw formats (although for the cited bug only
the software case matters).
Fixes#4804.
This is needed for HAVE_SSE4_INTRINSICS. config.h used to be included as
a transitive dependency of vf.h, but the include statement was removed
from vf.h in 8f2ccba71b.
Also silence an unused variable warning that was introduced in the same
commit.
This adds handling of spherical video metadata: retrieving it from
demux_lavf and demux_mkv, passing it through filters, and adjusting it
with vf_format. This does not include support for rendering this type of
video.
We don't expect we need/want to support the other projection types like
cube maps, so we don't include that for now. They can be added later as
needed.
Also raise the maximum sizes of stringified image params, since they
can get really long.
Since these need to be refcounted, we throw them directly into struct
mp_image instead of being part of mp_colorspace. Even though they would
semantically make more sense in mp_colorspace, having them there is
really awkward because mp_colorspace is passed around and stored a lot,
and this way their lifetime is exactly tied to the lifetime of the
mp_image associated with it.
Refactor the image allocation code, and expose part of it as helper
code. This aims towards allowing callers to easily allocate mp_image
references from custom-allocated linear buffers. This is exposing only
as much as what should be actually required.
Slightly cleaner, possibly slightly more correct. (The last case should
be dead code now. In general, we can't know the implied colorspace from
a AV_PIX_FMT, at least not if FFmpeg adds a new one.)
Another legacy annoyance. The only place where packed YUV is still
important is slightly older Apple hardware or drivers, which require
it for efficient hardware decoding.
For HLG, due to the usage of a reference OOTF configured for 1000 cd/m²,
the default sig_peak of =nom_peak was suboptimal. We can go down to
1000/100 (=10.0), since that's the true dynamic range of the output
signal after it passes through the OOTF.
This introduces (yet another..) mp_colorspace members, an enum `light`
(for lack of a better name) which basically tells us whether we're
dealing with scene-referred or display-referred light, but also a bit
more metadata (in which way is the scene-referred light expected to be
mapped to the display?).
The addition of this parameter accomplishes two goals:
1. Allows us to actually support HLG more-or-less correctly[1]
2. Allows people playing back direct “camera” content (e.g. v-log or
s-log2) to treat it as scene-referred instead of display-referred
[1] Even better would be to use the display-referred OOTF instead of the
idealized OOTF, but this would require either native HLG support in
LittleCMS (unlikely) or more communication between lcms.c and
video_shaders.c than I'm remotely comfortable with
That being said, in principle we could switch our usage of the BT.1886
EOTF to the BT.709 OETF instead and treat BT.709 content as being
scene-referred under application of the 709+1886 OOTF; which moves that
particular conversion from the 3dlut to the shader code; but also allows
a) users like UliZappe to turn it off and b) supporting the full HLG
OOTF in the same framework. But I think I prefer things as they are
right now.
List of changes:
1. Kill nom_peak, since it's a pointless non-field that stores nothing
of value and is _always_ derived from ref_white anyway.
2. Kill ref_white/--target-brightness, because the only case it really
existed for (PQ) actually doesn't need to be this general: According
to ITU-R BT.2100, PQ *always* assumes a reference monitor with a
white point of 100 cd/m².
3. Improve documentation and comments surrounding this stuff.
4. Clean up some of the code in general. Move stuff where it belongs.
Since michael was somewhat involved in it, wait with the actual license
change until the core is relicensed. Thus mark it as "Almost LGPL.".
The worrisome part about mp_image.c is that it was created by cehoyos
(which disagreed with LGPL) in commit f2dee327b2. But it turns out it
was a patch by someone else (who agreed with LGPL).
For some reason, the patch was actually slightly modified by cehoyos for
no reason (messed with the include statements), so we mess them back,
just to be sure.
Other than this, there were some commits that added support for new
IMGFMTs over the years. Some of these were by people we didn't ask or we
didn't get permission from. But since the original mp_image code was
replaced by more generic code using FFmpeg pixdesc, none of these
changes are left anyway.
One additional change by cehoyos (115bfb9762) has been removed as well
(when "direct rendering" was dropped from the filter chain).
If imgfmt is a hwaccel format, hw_subfmt will contain the CPU equivalent
of the data stored in the hw frames.
Strictly speaking, not doing this was a bug, but since hwaccel formats
were tagged with MP_IMGFLAG_YUV, it didn't have much of an impact.
Preparation for enabling hw filters. mp_image_params can't have an
AVHWFramesContext reference (because it can't hold any allocations, and
isn't meant to hold "active" data in the first place.
So just use a mp_image. It has all real data removed, because that would
essentially leak 1 frame once the decoder or renderer don't need it
anymore.
Mostly affects conversion of the colorimetric parameters.
Not changing AV_FRAME_DATA_MASTERING_DISPLAY_METADATA handling - that's
too messy, as decoders typically output it for keyframes only, and would
require weird caching that can't even be done on the level of the frame
rewrapping functions.
This fixes direct rendering with hwdec_vaegl.c.
The code duplication between update_image_params() and
mp_image_copy_fields_from_av_frame() is quite annoying,
bit will have to be resolved in another commit.
Helps with gif, probably does unwanted things with other formats.
This doesn't handle --end quite correctly, but this could be added
later.
Fixes#3924.
The hw_subfmt field roughly corresponds to the field
AVHWFramesContext.sw_format in ffmpeg. The ffmpeg one is of the type
AVPixelFormat (instead of the underlying hardware format), so it's a
good idea to switch to this too for preparation.
Now the hw_subfmt field is an mp_imgfmt instead of an opaque/API-
specific number. VDPAU and Direct3D11 already used mp_imgfmt, but
Videotoolbox and VAAPI had to be switched.
One somewhat user-visible change is that the verbose log will now always
show the hw_subfmt as image format, instead of as nonsensical number.
(In the end it would be good if we could switch to AVHWFramesContext
completely, but the upstream API is incomplete and doesn't cover
Direct3D11 and Videotoolbox.)
This involves multiple changes:
1. Brightness metadata is split into nominal peak and signal peak.
For a quick and dirty explanation: nominal peak is the brightest value
that your color space can represent (i.e. the brightness of an encoded
1.0), and signal peak is the brightest value that actually occurs in
the video (i.e. the brightest thing that's displayed).
2. vo_opengl uses a new decision logic to figure out the right nom_peak
and sig_peak for all situations. It also does a better job of picking
the right target gamut/colorspace to use for the OSD. (Which still is
and still should be treated as sRGB). This change in logic also
fixes#3293 en passant.
3. Since it was growing rapidly, the logic for auto-guessing / inferring
the right colorimetry configuration (in pass_colormanage) was split from
the logic for actually performing the adaptation (now pass_color_map).
Right now, the new logic doesn't do a whole lot since HDR metadata is
still ignored (but not for long).
This has two reasons:
1. I tend to add new fields to this metadata, and every time I've done
so I've consistently forgotten to update all of the dozens of places in
which this colorimetry metadata might end up getting used. While most
usages don't really care about most of the metadata, sometimes the
intend was simply to “copy” the colorimetry metadata from one struct to
another. With this being inside a substruct, those lines of code can now
simply read a.color = b.color without having to care about added or
removed fields.
2. It makes the type definitions nicer for upcoming refactors.
In going through all of the usages, I also expanded a few where I felt
that omitting the “young” fields was a bug.
User request and not that hard. Closes#3157.
Note that FFmpeg doesn't support this and there's no signalling in HEVC
etc., so the only way users can access it is by using vf_format
manually.
Mind: This encoding uses full range values, not TV range.
Instead of doing HDR tone mapping on an ad-hoc basis inside
pass_colormanage, the reference peak of an image is now part of the
image params (alongside colorspace, gamma, etc.) and tone mapping is
done whenever peak_src != peak_dst.
To get sensible behavior when mixing HDR and SDR content and displays,
target-brightness is a generic filler for "the assumed brightness of SDR
content".
This gets rid of the weird display_scaled hack, sets the framework
for multiple HDR functions with difference reference peaks, and allows
us to (in a future commit) autodetect the right source peak from
the HDR metadata.
(Apart from metadata, the source peak can also be controlled via
vf_format. For HDR content this adjusts the overall image brightness,
for SDR content it's like simulating a different exposure)
No reason to do so. See also commit 240ba92b.
Since now many mp_images will never have a pixel aspect ratio set,
redefine a 0/0 aspect ratio to "undefined" instead invalid. This also
brings it more in line with how decoder vs. container aspect ratios are
handled.
Most callers seem to be fine with the new behavior.
mp_image_params_valid() in particular has to be adjusted, or some things
stop working due to mp_images not becoming valid after setting size and
format.
wm4
Akemi
James Ross-Gowan
Niklas Haas
Niklas Haas