This affects "pull" AOs only: ao_alsa, ao_pulse, ao_openal, ao_pcm,
ao_lavc. There are changes to the other AOs too, but that's only about
renaming ao_driver.resume to ao_driver.start.
ao_openal is broken because I didn't manage to fix it, so it exits with
an error message. If you want it, why don't _you_ put effort into it? I
see no reason to waste my own precious lifetime over this (I realize the
irony).
ao_alsa loses the poll() mechanism, but it was mostly broken and didn't
really do what it was supposed to. There doesn't seem to be anything in
the ALSA API to watch the playback status without polling (unless you
want to use raw UNIX signals).
No idea if ao_pulse is correct, or whether it's subtly broken now. There
is no documentation, so I can't tell what is correct, without reverse
engineering the whole project. I recommend using ALSA.
This was supposed to be just a simple fix, but somehow it expanded scope
like a train wreck. Very high chance of regressions, but probably only
for the AOs listed above. The rest you can figure out from reading the
diff.
This simply printf()s a concatenation of the provided string and the
relevant escape sequences. No idea what exactly defines this escape
sequence (is it just a xterm thing that is now supported relatively
widely?), and this simply uses information provided on the linked github
issue.
Not much of an advantage over --term-status-msg, though at least this
can have a lower update frequency. Also I may consider setting a default
value, and then it shouldn't conflict with the status message.
Fixes: #1725
This mode drops or repeats audio data to adapt to video speed, instead
of resampling it or such. It was added to deal with SPDIF. The
implementation was part of fill_audio_out_buffers() - the entire
function is something whose complexity exploded in my face, and which I
want to clean up, and this is hopefully a first step.
Put it in a filter, and mess with the shitty glue code. It's all sort of
roundabout and illogical, but that can be rectified later. The important
part is that it works much like the resample or scaletempo filters.
For PCM audio, this does not work on samples anymore. This makes it much
worse. But for PCM you can use saner mechanisms that sound better. Also,
something about PTS tracking is wrong. But not wasting more time on
this.
Can be useful to force it to adapt to extreme speed changes, while a
higher limit would just use a fraction closer to the original video
speed.
Probably useful for testing only.
Remove the vaguely defined plane_bits and component_bits fields from
struct mp_imgfmt_desc. Add weird replacements for existing uses. Remove
the bytes[] field, replace uses with bpp[].
Fix some potential alignment issues in existing code. As a compromise,
split mp_image_pixel_ptr() into 2 functions, because I think it's a bad
idea to implicitly round, but for some callers being slightly less
strict is convenient.
This shouldn't really change anything. In fact, it's a 100% useless
change. I'm just cleaning up what I started almost 8 years ago (see
commit 00653a3eb0). With this I've decided to keep mp_imgfmt_desc,
just removing the weird parts, and keeping the saner parts.
Before this, we pretty much guaranteed that --mpv-ipc-fd=3 would be
passed. The FD was hardcoded, so scripts started by this mechanism
didn't need to actually parse the argument. Change this to using a
mostly random FD number instead.
I decided to do this because posix_spawnp() and the current replacement
cannot "guarantee" a FD layout. posix_spawn_file_actions_adddup2() just
runs dup2() calls, so it may be hard to set FD 3/4 if they are already
used by something else. For example imagine trying to map:
{.fd = 3, .src_fd = 4},
{.fd = 4, .src_fd = 3},
Then it'd do dup2(4, 3), dup2(3, 4) (reminder: dup2(src, dst)), and the
end result is that FD 4 really maps to the original FD 4.
While this was not a problem in the present code, it's too messy that I
don't want to pretend it can always done this way without an unholy
mess. So my assumption is that FDs 0-2 can be freely assigned because
they're never closed (probably...), while for all other FDs only
pass-through is reasonable.
See manpage additions. This was requested, sort of. Although what has
been requested might be something completely different. So this is
speculative.
This also changes sub_get_text() to return an allocated copy, because
the buffer shit was too damn messy.
As discussed in the referenced issue. This is quite a behavior change,
bit since this option is new, and not included in any releases yet, I
think it's OK.
Fixes: #7648
This isn't useful anymore. We have a much better d3d11 renderer in
vo_gpu. D3D11 is available in all supported Windows versions. The
StretchRect path might still be useful for someone (???), and leaving it
at least evades conflict about users who want to keep using this VO for
inexplicable reasons. (Low power usage might be a justified reason, but
still, no.)
Also fuck the win32 platform, it's a heap of stinky shit. Microsoft is
some sort of psycho clown software company. Granted, maybe still better
than much of the rest of Silly Con Valley.
By default --sub-auto uses "exact". This was far from an "exact" match,
because it added anything that started with the video filename (without
extension), and seemed to end in something that looked like a language
code.
Make this stricter. "exact" still tolerate a language code, but the
video's filename must come before it without any unknown extra
characters. This may not load subtitles in some situations where it
previously did, and where the user might think that the naming
convention is such that it should be considered an exact match.
The subtitle priority sorting seems a bit worthless. I suppose it may
have some value in higher "fuzz" modes (like --sub-auto=fuzzy).
Also remove the mysterious "prio += prio;" line. I probably shouldn't
have checked, but it goes back to commit f16fa9d31 (2003), where someone
wanted to "refine" the priority without changing the rest of the code or
something.
Mostly untested, so have fun.
Fixes: #7702
This is mostly for testing. It adds passing through the metadata through
the video chain. The metadata can be manipulated with vf_format. Support
for zimg alpha conversion (if built with zimg after it gained alpha
support) is implemented. Support premultiplied input in vo_gpu.
Some things still seem to be buggy.
Consider e.g. --aid=2 with a file that has only 1 track. Then it would
fall back to selecting track 1. Stop doing this. If no matching track is
found, this will not select any track now.
Note that the fingerprint stuff (track_layout_hash in the source)
prevents softens the impact of this change. Without the fingerprint,
playing a dual-audio file with the second track selected, and then a
single-audio file, would play the second file without audio. But the
fingerprint resets it due to differences in the track list.
Try to exhaustively document this and tricky interactions between the
other features. What a damn mess, I think it's simply cursed. Of course
it's still my fault.
See: #7608
Some time ago, properties and options were mostly unified. However, the
track selection properties/options semantics are incompatible to this
change. I'm still trying to handle the fallout.
There are two things that are in the way:
1. Track properties somehow return the runtime selection, not the option
value (all while properties are supposed to be aliases to options
with the same name).
2. The user's track options are not supposed to be changed without
interaction. If a track is auto-selected, the property should return
its ID, but the option value should remain at "auto". Only if the
user actually writes to the property the option should change. E.g.
playing e.g. an audio-only file and then a normal video file not play
the video file with --vid=no just because the audio file had no video
track.
In addition to each of them being in conflict with the property/option
unification, attempt to fix one of them breaks the other one.
Today, we're trying to fix parts of this and avoiding an unfortunate
case where you can get a conflicting option/property value, and where
trying to select a track does nothing if the track to select has the
same ID as the option value.
This breaks 2. from above in certain situations. See manpage additions.
See: #7608
This sucks, but is helpful for testing.
Obviously, it would be much nicer if there were a way to specify _all_
scaler options per filter (if the user wanted), instead of always using
the global options. But this is "too hard" for now. For testing, it is
extremely convenient to select the scaler backend, so add this option,
but make clear that it could go away. We'd delete it once there is a
better mechanism for this.
Keys and lines-to-scroll are configurabe, and the scroll keys are only
bound on pages which support scrolling (currently only page 4) - also
during oneshot (like the page-switching keys).
Scroll offset is reset for all pages on any key - except scroll keys, so
that entering or switching to a page resets the scroll, as well as when
"re-entering" the same page or "re-activating" the stats oneshot view.
TODO: print_page(..) is highly associated with extending the oneshot
timer if required. The timer handling can probably move into print_page
and removed from all the places which boilerplate its management.
While --input-file was removed for justified reasons, wanting to pass
down socket FDs this way is legitimate, useful, and easy to implement.
One odd thing is that
Fixes: #7592
Add an infrastructure for collecting performance-related data, use it in
some places. Add rendering of them to stats.lua.
There were two main goals: minimal impact on the normal code and normal
playback. So all these stats_* function calls either happen only during
initialization, or return immediately if no stats collection is going
on. That's why it does this lazily adding of stats entries etc. (a first
iteration made each stats entry an API thing, instead of just a single
stats_ctx, but I thought that was getting too intrusive in the "normal"
code, even if everything gets worse inside of stats.c).
You could get most of this information from various profilers (including
the extremely primitive --dump-stats thing in mpv), but this makes it
easier to see the most important information at once (at least in
theory), partially because we know best about the context of various
things.
Not very happy with this. It's all pretty primitive and dumb. At this
point I just wanted to get over with it, without necessarily having to
revisit it later, but with having my stupid statistics.
Somehow the code feels terrible. There are a lot of meh decisions in
there that could be better or worse (but mostly could be better), and it
just sucks but it's also trivial and uninteresting and does the job. I
guess I hate programming. It's so tedious and the result is always shit.
Anyway, enjoy.
That's where it comes from after all. The other property does not have
much of a reason to exist anymore, but there's no real reason to remove
it either.
Ancient Linux audio output. Apparently it survived until now, because
some BSDs (but not all) had use of this. But these should work with
ao_sdl or ao_openal too (that's why these AOs exist after all). ao_oss
itself has the problem that it's virtually unmaintainable from my point
of view due to all the subtle (or non-subtle) difference. Look at the
ifdef mess and the multiple code paths (that shouldn't exist) in the
removed source code.
I wonder what this even is. I've never heard of anyone using it, and
can't find a corresponding library that actually builds with it. Good
enough to remove.
It was always marked as "experimental", and had inherent problems that
were never fixed. It was disabled by default, and I don't think anyone
is using it.
May or may not help when dealing with playlist loading in scripts. It's
supposed to help with the mean fact that loading a recursive playlist
will essentially edit the playlist behind the API user's back.
Scripts such as the OSC can be loaded and unloaded at runtime by
toggling the option that enables them. (It even works, although normally
it's only used to control initial loading.)
Unloading was racy because it used the client name; fix this.
The load-script change is an accidental feature. And probably useless.
Lua changed behavior for this specific event. I considered the change
minor enough that it would not need to go through deprecation, but
someone hit it immediately and ask on the -dev channel.
It's probably better to restore the behavior. But mark it as deprecated,
since it's problematic (mismatch with the C API). Unfortunately, no
automatic warning is possible. (Or maybe it is, by playing sophisticated
Lua tricks such as setting a metatable and overriding indexing, but
let's not.)
Move some parts that can be generic to the client API code. It turns out
lua.c doesn't need anything special.
This adds the "id" field. I think this was actually missing from the
JSON IPC code (i.e. it's a very recent regression that is fixed with
this commit).
Both Lua and the JSON IPC code need to convert the mpv_event struct (and
everything it points to) to Lua tables or JSON.
I was getting sick of having to make the same changes to Lua and IPC. Do
what has been done everywhere else, and let the core handle this by
going through mpv_node (which is supposed to serve both Lua tables and
JSON, and potentially other scripting language backends). Expose it as
new libmpv API function.
The new API is still a bit "rough" and support for other event types
might be added in the future.
This silently adds support for the playlist_entry_id fields to both Lua
and JSON IPC.
There is a small API change for Lua; I don't think this matters, so I
didn't care about compatibility. The new code in client.c is mashed up
from the Lua and the IPC code. The manpage additions are moved from the
Lua docs, and made slightly more "general".
Some danger for unintended regressions both in Lua and IPC. Also damn
these node functions suck, expect crashes due to UB.
Not sure why this became more code instead of less compared to before
(according to the diff stat), even though some code duplication across
Lua and IPC was removed. Software development sucks.
Should give a good deal more explicit control and insight over the
player state.
Some feel a bit pointless, and/or expose internal weirdness. However,
it's not like the existing weirdness didn't exist before, or can be made
go away. (In part, the weirdness is because certain in-between states
are visible. Hiding them would make things simpler, but less flexible.)
Maybe this actually gives users a better idea how the API _should_ look
like, too.
On a side note, this tries to really guarantee that mpctx->playing is
set between playback start/end. For that, the loadfile.c changes assume
that mpctx->playing is set (guaranteed by code above the change), and
that playing->filename is set (probably could never be false; was broken
before and actually would have crashed if that could ever happen; in any
case, also add an assert to playlist.c for this).
playlist_entry_to_index() now tolerates playlist_entrys that are not
part of the playlist. This is also needed for mpctx->playing.
It's odd that this state is observable, but is made implicit by making
the property unavailable. It's also odd that an API user cannot directly
put the player into such a state.
Just allow reading/writing -1 (or in fact, any out of bounds index) for
this case.
I'm also refraining from using OPT_CHOICE for the "no selection" case,
because although that would be cleaner in theory, it would cause only
problems to API users due to the more complex property type (worse is
better).
One reason for not restricting the integer range on the input property
anymore is that if there are no playlist elements, the range would
contain only 1 integer, which cannot be represented anymore since the
recent m_option change. This was actually broken with 1 element
playlists before (and still is, with the constricted type for OSD and
the add/cycle commands). Doesn't matter too much.
When the current file changes (or rather, when starting/finishing
playback of a playlist entry), clients tend to have the problem that
it's hard to tell whether a property change notification (via
mpv_observe_property() and mechanisms layered on top of it) is from the
previous or new playlist entry. The previous commit probably helps, but
all the asynchronity is still a bit unhelpful.
Try to make this better by adding new hooks, that are run before/after
playback init/deinit. This is similar to the existing hooks, except
they're outside of "initialized" playback, which excludes that you might
accidentally get an overlap between the current and the previous/next
playlist entry.
That still doesn't seem quite enough, since normally, property change
notifications come after the hook event. So basically a client would
have to explicitly "drain" the event queue within the hook, and make the
hook continue only after that is done. Knowing when property
notifications are done is another asynchronous nightmare (how exactly it
works keeps changing within client.c, and an API user probably can't
tell anymore when all pending properties are truly done). So introduce
another guarantee: properties that were changed before the hook happens
will be returned before the hook event is returned. That means the
client will have received all pending property notifications from the
previous playlist entry (or whatever) before the hook is entered.
As another minor complication, we shouldn't just keep the hook pending
until _all_ property notifications are done, since the client's hook
could produce new ones. (Or just consider things like the demuxer thread
hammering the client with cache update events, while the "on_preloaded"
hook is run.) So there is some extra untested, fragile logic in client.c
to handle this (the waiting_for_hook flag).
This probably works, but was barely tested. Not sure if this helps
anyone, but I think it's fine for my own purposes. (I really hated this
aspect of the API whenever I used it myself.)
This is more or less a minimal hack to make _some_ text measurement
functionality available to scripts. Since libass does not support such a
thing, this simply uses the bounding box of the rendered text.
This is far from ideal. Problems include:
- using a bitmap bounding box
- additional memory waste and/or flushing caches
- dependency on window size
- odd small deviations with different window sizes (run osd-test.lua and
resize the window after each timer update; the bounding boxes aren't
adjusted in an overly useful way)
- inability to query the size _after_ actual rendering
But I guess it's a start. Since I'm aware that it's crap, add a threat
to the manpage that this may be changed/removed again. For now, I'm
interested whether anyone will have use for it in its current form, as
it's an often requested feature.
wm4
Julian
RealDolos
Emanuele Torre
James Ross-Gowan
Avi Halachmi (:avih)