When performing the scaling calculations, the window scale properties do
not bother checking for potential monitor par. The vo keeps track of
this via vo->monitor_par. Simply multiply/divide the video's width or
height depending on the value of monitor_par. We also clamp the values
to avoid the values running away to infinity in extreme cases.
The vo currently handles rotations in 90 degree steps and some VOs set
this via VO_CAP_ROTATE90. When the rotation exactly hits either 90 or
270 degrees, this causes the values of dwidth and dheight to perfectly
swap like one would expect. However, the mp_image_params_get_dsize
function call in both of the window scale functions do not take this
special case into account. So the width/height values returned will be
incorrectly flipped in the 90 and 270 degree cases if the vo driver does
implement VO_CAP_ROTATE90 (like vo=gpu). Fortunately, the
mp_image_params struct keeps track of the rotation for us. So all we
need to do is check if the image is rotated at 90 or 270 degrees and
check that the current vo driver supports VO_CAP_ROTATE90. If so, then
swap vid_w and vid_h to their true, correct values.
Based on a small patch originally written by @avih. Instead of
duplicating the window-scale logic in update_window_scale, just call the
mp_property_current_window_scale function with the M_PROPERTY_SET action
and a NULL property.
The window-scale property mirrors the respective option (not the
effective scale derived from the current window size), and as such
setting its value to the same value it had before has no effect.
Specifically - the window will not resize.
This is consistent as far as property-option bridge behavior goes,
but we do end up with an issue that we can't set an arbitrary scale
and expect the window to always resize accordingly.
We do also have a current-window-scale property which does reflect
the actual window size, however, it's been read-only till now.
This commit makes current-window-scale RW so that it's now always
possible to set an arbitrary scale and expect the window to resize
accordingly (without affecting window-scale - like manual resize).
Also, mention window-scale no-effect-if-not-changed at the docs.
Based on code by @Dudemanguy from commit 873ae0d, with same effect.
This reverts commit 873ae0de2a.
The next commit will restore this functionality, with the
following differences from the reverted commit:
- Smaller and simpler code change.
- On bad scale: use "Invalid value" (compared to "no such property").
- Doesn't combine the docs for window-scale and current-window-scale.
- Doesn't remove the docs for window-scale behavior prior to 0.31.0.
Somewhat confusingly, mpv has both a window-scale option and a
current-window-scale property. The documentation lists window-scale
under properties (and it is technically is one), but at its core it is
actually an option which means it behaves subtly different. Options in
mpv are runtime-configurable, but they only change anything if the value
of the option itself changes. window-scale is an option and not meant to
keep track of the actual scale of the window (intended behavior
introduced by d07b7f0). This causes window-scale to do nothing in
certain cases (ex: the window is manually resized and window-scale is
set to 1.00 again). This is logical and consistent with the behavior of
the rest of the mpv options, but it also makes it a poor candidate for
setting the mpv window scale dynamically.
As a remedy, we can just make current-window-scale writeable instead.
current-window-scale is intended to always report the actual scale of
the window and keep track of any window size changes made by the user.
By making this property also writeable, it allows the user to have more
intuitive behavior (i.e. setting current-window-scale to 1.00 always
sets the window to a scale of 1). Additionally, the default input.conf
is changed to use current-window-scale instead of window-scale. The
window-scale documentation under property list is removed since it is
already documented under options and users should probably set the
current-window-scale property instead in most cases.
When changing image-display-duration at runtime, make the new value take
effect immediately, rather than from the next playlist-position change.
This allows toggling the slideshow mode while viewing images (without
hacks like executing playlist-play-index current afterwards).
All the conditions are just to be safe since even if you set time_frame
while playing a video, it's immediately overwritten by the next value.
Modifies the sub-seek and sub-step commands with a second <flags>
argument to specify whether to seek/step on the primary or secondary
subtitles. The flag is used to index into the current_track array in
cmd_sub_step_seek.
Adds secondary-sub-start and secondary-sub-end properties by setting
the current_track index in the m_property's priv variable which later
gets accessed in get_times. Also adds a test of the secondary subtitle
time properties in tests/subtimes.js bound to 'T'.
For some reason, this never existed before. Add VOCTRL_GET_DISPLAY_RES
and use it to obtain the current display's resolution from each
vo/windowing backend if applicable. Users can then access the current
display resolution as display-width and display-height as per the client
api. Note that macOS/cocoa was not attempted in this commit since the
author has no clue how to write swift.
Some subproperties in osd-dimensions were returned as doubles despite
actually being integers. Additionally, correct a highly misleading line
in the osd-width/osd-height documentation.
Now loading cover art through mp_add_external_file requires an
additional argument to be set to true. This way not all video-add
commands end up being marked as cover art when they move through
mp_add_external_file, as originally changed in 55d7f9ded1 .
Additionally, this lets us clean up some logic that would otherwise be
duplicated between open_external_files and autoload_external_files, if
the logic had been kept split from mp_add_external_file.
Fixes#8358
Previously the mouse command never ended up in enter/leave keypresses
for the default section even when logically required, because input.c
does not know the area of the default section and relies on something
feeding it ENTER/LEAVE presses - which the VO typically does but the
mouse command didn't.
Now the mouse command feeds it ENTER/LEAVE if required.
It's possible to handle it differently and more consistently by:
1. reverting this commit.
2. Updating the default section area whenever the osd dimensions change.
3. Always ignore MOUSE_ENTER keys because the position is not known yet
(but MOSE_MOVE typically follows right away).
4. On mouse move: first generate ENTER/LEAVE if required.
That would guarantee consistency between mouse position and enter/leave
events but could be more sensitive to manage (the default section has
"infinite" area which is used to capture any event outside of specific
section areas), while this commit keeps consistency same as before and
depending on correct external feeding - which we now do better, even if
still not optimally (like before, it's still technically possible that
a script recieves MOUSE_ENTER and then reads the position before it got
updated after the ENTER).
Add a third field: "hover", which is updated from input.c after input
keys MP_KEY_MOUSE_LEAVE and MP_KEY_MOUSE_ENTER - which are typically
sent by the VO.
It's part of mouse-pos and not a new property because it's highly tied
to mouse-pos - it makes x/y invalid while the cursor doesn't hover the
window.
Unike mouse-move, no dummy command was generated, so we add dummy
command in order for observer notification to work even while nothing
is bound.
Like mouse-pos, clients could not detect whether the mouse pointer
hovers the window because the OSC force-binds the MOUSE_LEAVE key, and
now they can using the hover field.
The lua mp.get_mouse_pos() wrapper still returns only x, y because
that's what osc.lua needs. Other clients can simply read the property.
This is a read-only MPV_NODE value with integer fields: x, y.
The values are unmodified from mp_input_get_mouse_pos(...).
Observer notification of this property is tied to the INPUT_PROCESSED
event, which fires after mouse move even if no command is bound
(dummy commands are generated if nothing is bound to ensure that
mp_input_get_mouse_pos returns the latest values - see ac927e39 ).
This allows clients such as JSON IPC to observe mouse position even
while the OSC is enabled - the OSC force-binds mouse move for most
of the window area, making it impossible for other clients to bind
mouse move without breaking the OSC.
This introduces the delete-watch-later-config command, to complement
write-watch-later-config. This is an alternative to #8141.
The general problem that this change is attempting to help solve has
been described in #336, #3169 and #6574. Though persistent playback
position of a single file is generally a solved problem, this is not
the case for playlists, as described in #8138.
The motivation is facilitating intermittent playback of very large
playlists, consisting of hundreds of entries each many hours
long. Though the current "watch later" mechanism works well - provided
that the files each occur only once in that playlist, and are played
only via that playlist - the biggest issue is that the position is
lost completely should mpv exit uncleanly (e.g. due to a power
failure). Existing workarounds (in the form of Lua scripts which call
write-watch-later-config periodically) fail in the playlist case, due
to the mechanism used by mpv to determine where within a playlist to
resume playback from.
The missing puzzle piece needed to allow scripts to implement a
complete solution to this problem is simply a way to clean up the
watch-later configuration that the script asked mpv to write using
write-watch-later-config. With that in place, scripts can then
register an end-file event listener, check the stop playback reason,
and in the "eof" and "stop" case, invoke delete-watch-later-config to
delete any saved positions written by write-watch-later-config. The
script can then proceed to immediately write a new one when the next
file is loaded, which altogether allows mpv to resume from the correct
playlist and file position upon next startup.
Because events are delivered and executed asynchronously,
delete-watch-later-config takes an optional filename argument, to
allow scripts to clear watch-later configuration for files after mpv
had already moved on from playing them and proceeded to another file.
A Lua script which makes use of this change can be found here:
https://gist.github.com/CyberShadow/2f71a97fb85ed42146f6d9f522bc34ef
(A modification of the one written by @Hakkin, in that this one takes
advantage of the new command, and also saves the state immediately
when a new file is loaded.)
Pause can be changed during a file change, such as with for example
--reset-on-next-file=pause, or in hooks, or by being quick, and in this
case the AO's pause state was not updated correctly. mpctx->ao_chain is
only set if playback is fully initialized, while the AO itself in
mpctx->ao can be reused across files.
Fix this by always running set_pause_state() if the pause option is
changed. Could cause new bugs since running this used to be explicitly
avoided outside of the loaded state. The handling of time_frame is
potentially worrisome.
Regression due to recent audio refactor; before that, the AO didn't have
a separate/persistent pause state.
Fixes: #8079
Add a property that returns whether the window is focused, currently
only for X11 and Wayland.
My use cause for this is having an equivalent of pause-when-minimize.lua
for tiling window managers: make mpv play only while it's in the current
workspace or is focused (I'm fine with either one but prefer focus).
On X I do this by observing display-names, which is empty when the
rectangles of the display and mpv don't intersect, but on Wayland its
value doesn't change when mpv leaves the current workspace (and the same
check doesn't work since the geometries still intersect).
This could later be made writable as requested in #6252.
Note that on Wayland se shouldn't consider an unactivated window with
keyboard input focused.
The wlroots compositors I tested set activated after changing the
keyboard focus, so if you set wl->focused only in
keyboard_handle_enter() and keyboard_handle_leave() to avoid adding the
"has_keyboard_input" member, focused isn't set to true when first
opening mpv until you focus another window and focus mpv again.
Conversely, if that order can't be assumed for all compositors, we
should toggle wl->focused when necessary in keyboard_handle_enter() and
keyboard_handle_leave() as well as in handle_toplevel_config().
Make it possible to feed a string to stdin of a subprocess. Out of
laziness, it can't be an arbitrary byte string. (Would require adding an
option type that takes in a Lua byte string.)
Do not set stdin of a subprocess to fd 0 (i.e. mpv's stdin) anymore,
because it makes things more consistent. Enabling stdin didn't make too
much sense in the first place, so this behavior change seems
justifiable.
win32 support missing.
Fixes: #8003
Options like --sub-ass-force-style and others could not be changed at
runtime (the changes didn't take any effect). Fix this by using the
brutal approach, and completely reinit the subtitle state when this
happens. Maybe a bit clunky, but for now I'd rather not put more effort
into this.
Fixes: #7689
Requested. Should be good for simple use cases. "sub2" is technically
inconsistent (since the option is called --secondary-sid), but fuck the
consistent name.
Make it possible to restore from profiles by backing up the option
values before profile application. This is sort of like unapplying a
profile. Since there might be multiple ways to do this, a profile needs
to explicitly provide the "profile-restore" option, which specifies how
exactly this should be done.
This is a big mess. There is not natural way to do this. Profile
application is "destructive" and simply changes the values of the
options. Maybe one could argue that the option system should have
hierarchical "overlays" of profiles instead, where unset options will
use the value of the lower profiles. Options set interactively by the
user would be the top profile. Default values would be in the lowest
profile. You could unapply a profile by simply removing it from this
overlay stack.
But uh, let's not, so here's something stupid. It reuses some code used
for file local options to reduce code size. At least the overlay idea
would still be possible in theory, and could be added as another
profile-restore mode.
This is used by the following commit.
Add env and detach arguments. This means the command.c code must use the
"new" mp_subprocess2(). So also take this as an opportunity to clean up.
win32 support gets broken by it, because it never made the switch to the
newer function.
The new detach parameter makes the "run" command fully redundant, but I
guess we'll keep it for simplicity. But change its implementation to use
mp_subprocess2() (couldn't do this earlier, because win32).
Privately, I'm going to use the "env" argument to add a key binding that
starts a shell with a FILE environment variable set to the currently
playing file, so this is very useful to me.
Note: breaks windows, so for example youtube-dl on windows will not work
anymore. mp_subprocess2() has to be implemented. The old functions are
gone, and subprocess-win.c is not built anymore. It will probably work
on Cygwin.
Commit 9d32d62b61 broke this when it changed OPT_TIME. I simply forgot
to adjust the command definition. The effect was that "no" was not
accepted as value.
Execution of "stop" command in the case when idle mode was not enabled
resulted in player termination scenario not honoring user setting
"save-position-on-quit" from config file. This patch addresses the
issue by checking for "save-position-on-quit" in cmd_stop and saving
state when idle mode is not enabled.
Remove the vaguely defined plane_bits and component_bits fields from
struct mp_imgfmt_desc. Add weird replacements for existing uses. Remove
the bytes[] field, replace uses with bpp[].
Fix some potential alignment issues in existing code. As a compromise,
split mp_image_pixel_ptr() into 2 functions, because I think it's a bad
idea to implicitly round, but for some callers being slightly less
strict is convenient.
This shouldn't really change anything. In fact, it's a 100% useless
change. I'm just cleaning up what I started almost 8 years ago (see
commit 00653a3eb0). With this I've decided to keep mp_imgfmt_desc,
just removing the weird parts, and keeping the saner parts.
See manpage additions. This was requested, sort of. Although what has
been requested might be something completely different. So this is
speculative.
This also changes sub_get_text() to return an allocated copy, because
the buffer shit was too damn messy.
Making OSD/subtitle bitmaps refcounted was planend a longer time ago,
e.g. the sub_bitmaps.packed field (which refcounts the subtitle bitmap
data) was added in 2016. But nothing benefited much from it, because
struct sub_bitmaps was usually stack allocated, and there was this weird
callback stuff through osd_draw().
Make it possible to get actually refcounted subtitle bitmaps on the OSD
API level. For this, we just copy all subtitle data other than the
bitmaps with sub_bitmaps_copy(). At first, I had planned some fancy
refcount shit, but when that was a big mess and hard to debug and just
boiled to emulating malloc(), I made it a full allocation+copy. This
affects mostly the parts array. With crazy ASS subtitles, this parts
array can get pretty big (thousands of elements or more), in which case
the extra alloc/copy could become performance relevant. But then again
this is just pure bullshit, and I see no need to care. In practice, this
extra work most likely gets drowned out by libass murdering a single
core (while mpv is waiting for it) anyway. So fuck it.
I just wanted this so draw_bmp.c requires only a single call to render
everything. VOs also can benefit from this, because the weird callback
shit isn't necessary anymore (simpler code), but I haven't done anything
about it yet. In general I'd hope this will work towards simplifying the
OSD layer, which is prerequisite for making actual further improvements.
I haven't tested some cases such as the "overlay-add" command. Maybe it
crashes now? Who knows, who cares.
In addition, it might be worthwhile to reduce the code duplication
between all the things that output subtitle bitmaps (with repacking,
image allocation, etc.), but that's orthogonal.
Apparently, this was a bit of a mess, which caused the bug fixed by
commit ec7f2388af. Try to improve this, and only use track selection
entries that exist.
Edition title is already exposed in demux_edition, it was just never
added to the display. If no edition title exists it will fall back
to the edition number.
While --input-file was removed for justified reasons, wanting to pass
down socket FDs this way is legitimate, useful, and easy to implement.
One odd thing is that
Fixes: #7592
