Since the display FPS is currently detected on X11 only (and even there
it's known to be wrong on certain setups), it seems like a good idea to
make this user-configurable.
This mostly uses the same idea as with vo_vdpau.c, but much simplified.
On X11, it tries to get the display framerate with XF86VM, and limits
the frequency of new video frames against it. Note that this is an old
extension, and is confirmed not to work correctly with multi-monitor
setups. But we're using it because it was already around (it is also
used by vo_vdpau).
This attempts to predict the next vsync event by using the time of the
last frame and the display FPS. Even if that goes completely wrong,
the results are still relatively good.
On other systems, or if the X11 code doesn't return a display FPS, a
framerate of 1000 is assumed. This is infinite for all practical
purposes, and means that only frames which are definitely too late are
dropped. This probably has worse results, but is still useful.
"--framedrop=yes" is basically replaced with "--framedrop=decoder". The
old framedropping mode is kept around, and should perhaps be improved.
Dropping on the decoder level is still useful if decoding itself is too
slow.
The previous commit broke these things, and fixing them is separate in
this commit in order to reduce the volume of changes.
Move the image queue from the VO to the playback core. The image queue
is a remnant of the old way how vdpau was implemented, and increasingly
became more and more an artifact. In the end, it did only one thing:
computing the duration of the current frame. This was done by taking the
PTS difference between the current and the future frame. We keep this,
but by moving it out of the VO, we don't have to special-case format
changes anymore. This simplifies the code a lot.
Since we need the queue to compute the duration only, a queue size
larger than 2 makes no sense, and we can hardcode that.
Also change how the last frame is handled. The last frame is a bit of a
problem, because video timing works by showing one frame after another,
which makes it a special case. Make the VO provide a function to notify
us when the frame is done, instead. The frame duration is used for that.
This is not perfect. For example, changing playback speed during the
last frame doesn't update the end time. Pausing will not stop the clock
that times the last frame. But I don't think this matters for such a
corner case.
The VO is run inside its own thread. It also does most of video timing.
The playloop hands the image data and a realtime timestamp to the VO,
and the VO does the rest.
In particular, this allows the playloop to do other things, instead of
blocking for video redraw. But if anything accesses the VO during video
timing, it will block.
This also fixes vo_sdl.c event handling; but that is only a side-effect,
since reimplementing the broken way would require more effort.
Also drop --softsleep. In theory, this option helps if the kernel's
sleeping mechanism is too inaccurate for video timing. In practice, I
haven't ever encountered a situation where it helps, and it just burns
CPU cycles. On the other hand it's probably actively harmful, because
it prevents the libavcodec decoder threads from doing real work.
Side note:
Originally, I intended that multiple frames can be queued to the VO. But
this is not done, due to problems with OSD and other certain features.
OSD in particular is simply designed in a way that it can be neither
timed nor copied, so you do have to render it into the video frame
before you can draw the next frame. (Subtitles have no such restriction.
sd_lavc was even updated to fix this.) It seems the right solution to
queuing multiple VO frames is rendering on VO-backed framebuffers, like
vo_vdpau.c does. This requires VO driver support, and is out of scope
of this commit.
As consequence, the VO has a queue size of 1. The existing video queue
is just needed to compute frame duration, and will be moved out in the
next commit.
With software decoding, images were uploaded to vdpau surfaces as they
were queued to the VO. This makes it slightly more complicated
(especially later on), and has no advantages - so stop doing it.
The only reason why this was done explicitly was due to attempts to keep
the code equivalent (instead of risking performance regressions). The
original code did this naturally for certain reasons, but now that we
can measure that it has no advantages and just requires extra code, we
can just drop it.
Follow up on commit 760548da. Mouse handling is a bit confusing, because
there are at least 3 coordinate systems associated with it, and it
should be cleaned up. But that is hard, so just apply a hack which gets
the currently-annoying issue (VO backends needing access to the VO) out
of the way.
VO backends which are or will run in their own thread have a problem
with vo_mouse_movement() calling vo_control(). Restrict this to VOs
which actually need this.
Until now, failure to allocate image data resulted in a crash (i.e.
abort() was called). This was intentional, because it's pretty silly to
degrade playback, and in almost all situations, the OOM will probably
kill you anyway. (And then there's the standard Linux overcommit
behavior, which also will kill you at some point.)
But I changed my opinion, so here we go. This change does not affect
_all_ memory allocations, just image data. Now in most failure cases,
the output will just be skipped. For video filters, this coincidentally
means that failure is treated as EOF (because the playback core assumes
EOF if nothing comes out of the video filter chain). In other
situations, output might be in some way degraded, like skipping frames,
not scaling OSD, and such.
Functions whose return values changed semantics:
mp_image_alloc
mp_image_new_copy
mp_image_new_ref
mp_image_make_writeable
mp_image_setrefp
mp_image_to_av_frame_and_unref
mp_image_from_av_frame
mp_image_new_external_ref
mp_image_new_custom_ref
mp_image_pool_make_writeable
mp_image_pool_get
mp_image_pool_new_copy
mp_vdpau_mixed_frame_create
vf_alloc_out_image
vf_make_out_image_writeable
glGetWindowScreenshot
Let the VOs draw the OSD on their own, instead of making OSD drawing a
separate VO driver call. Further, let it be the VOs responsibility to
request subtitles with the correct PTS. We also basically allow the VO
to request OSD/subtitles at any time.
OSX changes untested.
While I'm not very fond of "const", it's important for declarations
(it decides whether a symbol is emitted in a read-only or read/write
section). Fix all these cases, so we have writeable global data only
when we really need.
Playing a video and then an audio file with cover art kept displaying
the last frame of the video. This was because the hasframe flag was set,
perhaps due to redrawing the last video frame before the cover art image
is decoded.
Until recently, the VO was an unavoidable part of the seeking code path.
This was because vdpau deinterlacing could double the framerate, and hr-
seek and framestepping etc. all had to "see" the additional frames. But
we've removed the frame doubling from the vdpau VO and moved it into a
video filter (vf_vdpaupp), and there's no reason left why the VO should
participate in seeking.
Instead of queuing frames to the VO during seek and skipping them
afterwards, drop the frames early.
This actually might make seeking with vo_vdpau and software decoding
faster, although I haven't measured it.
Currently, vo_reconfig() calculates the requested window size and sets
the vo->dwidth/dheight fields _if_ VOCTRL_UPDATE_SCREENINFO is
implemented by the VO or the windowing backend. The window size can be
different from the display size if e.g. the --geometry option is used.
It will also set the vo->dx/dy fields and read vo->xinerama_x/y.
It turned out that this is very backwards and actually requires the
windowing backends to workaround these things. There's also
MPOpts.screenwidth/screenheight, which used to map to actual options,
but is now used only to communicate the screen size to the vo.c code
calculating the window size and position.
Change this by making the window geometry calculations available as
separate functions. This commit doesn't change any VO code yet, and just
emulates the old way using the new functions. VO code will remove its
usage of VOCTRL_UPDATE_SCREENINFO and use the new functions directly.
Commit 433161 actually broke vo_opengl (and maybe others), because
config_ok is not necessarily set correctly yet _during_ reconfig. So a
vo_get_src_dst_rects() call during reconfig did nothing.
When the VO was not initialized with vo_reconfig(), or if the last
vo_reconfig() failed, changing panscan would cause a crash due to
vo_get_src_dst_rects() dereferencing vo->params (NULL if not
configured).
Just do nothing if that happens, as there is no video that could be
displayed anyway.
Doesn't really seem to be much of use. Get rid of the remaining uses of
it.
Concerning vo_opengl_old, it seems uninitGl() works fine even if called
before initialization.
Change how the video decoding loop works. The structure should now be a
bit easier to follow. The interactions on format changes are (probably)
simpler. This also aligns the decoding loop with future planned changes,
such as moving various things to separate threads.
Remove the special casing of vo_vdpau vs. other VOs. Replace the
complicated interaction between vo.c and vo_vdpau.c with a simple queue
in vo.c. VOs other than vdpau are handled by setting the length of the
queue to 1 (this is essentially what waiting_mpi was).
Note that vo_vdpau.c seems to have buffered only 1 or 2 frames into the
future, while the remaining 3 or 4 frames were past frames. So the new
code buffers 2 frames (vo_vdpau.c requests this queue length by setting
vo->max_video_queue to 2). It should probably be investigated why
vo_vdpau.c kept so many past frames.
The field vo->redrawing is removed. I'm not really sure what that would
be needed for; it seems pointless.
Future directions include making the interface between playloop and VO
simpler, as well as making rendering a frame a single operation, as
opposed to the weird 3-step sequence of rendering, drawing OSD, and
flipping.
Add the event FD after preinit, remove it before destroy. There's no
need to do it on vo_config, and there's no need to remove the event
FD when vo_config fails.
Unfortunately, if a VO can't display something as intended, we can just
complain to the user, and leave it at it. But it's still better than
silently displaying things differently with different VOs.
For now, this is used for rotation only. Other things that we should
check includes colorspace and colorlevels stuff.
For rotation, we assume that the source image will be rotated within the
VO, so the aspect/panscan code needs to calculate its param using
rotated coordinates. VOs which support rotation natively can use this.
Reduce most dependencies on struct mp_csp_details, which was a bad first
attempt at dealing with colorspace stuff. Instead, consistently use
mp_image_params.
Code which retrieves colorspace matrices from csputils.c still uses this
type, though.
The main difference between the old and new callbacks is that the old
callbacks required passing the window size, which is and always was very
inconvenient and confusing, since the window size is already in
vo->dwidth and vo->dheight.
Rename vo_get_src_dst_rects() to mp_get_src_dst_rects() and make it
independent from the VO (it takes a comical amount of parameters now to
pass all required state). Add a convenience wrapper with the name
vo_get_src_dst_rects() to vo.c. Replace all aspdat and vo usages with
immediate parameters.
Functionally, nothing should change, except that the window size is
clamped to a minimum of size 1 much earlier, and some log messages
change the prefix (don't bother with vo.vo_log stuff).
The plan is to make all the code in aspect.c independent from vo.c,
which should make the code easier to understand, will allow removal of
vo->aspdat, and reduces the amount of code that accesses weird mutable
struct vo fields.
For some reason, this made all VO backends both set the screen
resolution in opts->screenwidth/height, and call
aspect_save_screenres(). Remove the latter. Move the code to calculate
the PAR-corrected window size from aspect.c to vo.c, and make it so that
the monitor PAR is recalculated when it makes sense.
Note that we don't try to be clever about detecting the files as
subtitles: we just check the file extension. We could go all the way and
check the files by opening them with a demuxer, but that would probably
do more bad than good.
How embarrassing...
This code is inactive for all VOs other than vo_vdpau. For vo_vdpau,
this caused various issues, such as stuttering after about an hour of
running mpv; see github issue #403.
Always pass around mp_log contexts in the option parser code. This of
course affects all users of this API as well.
In stream.c, pass a mp_null_log, because we can't do it properly yet.
This will be fixed later.
Until now, there were two functions to add input sources (stuff like
stdin input, slave mode, lirc, joystick). Unify them to a single
function (mp_input_add_fd()), and make sure the associated callbacks
always have a context parameter.
Change the lirc and joystick code such that they take store their state
in a context struct (probably worthless), and use the new mp_msg
replacements (the point of this refactoring).
Additionally, get rid of the ugly USE_FD0_CMD_SELECT etc. ifdeffery in
the terminal handling code.
Since m_option.h and options.h are extremely often included, a lot of
files have to be changed.
Moving path.c/h to options/ is a bit questionable, but since this is
mainly about access to config files (which are also handled in
options/), it's probably ok.
Use the scaled video size (i.e. as shown on the window) as reference for
zoom. This is the easiest way to fix different width/height scale
factors as they happen when zooming video with a pixel aspect ratio
other than 1:1.
Also fix the unscaled mode, so that it 1. doesn't scale even with
--video-zoom, and 2. doesn't scale by small amounts when the video is
cropped by making the window smaller than the video.
There are some use cases for this. For example, you can use it to set
defaults of automatically inserted filters (like af_lavrresample). It's
also useful if you have a non-trivial VO configuration, and want to use
--vo to quickly change between the drivers without repeating the whole
configuration in the --vo argument.
This is not needed anymore, because we decided that the PAR of the
decoded video matters, and not the PAR of the filtered video that
arrives at the VO.
The configure followed 5 different convetions of defines because the next guy
always wanted to introduce a new better way to uniform it[1]. For an
hypothetic feature 'hurr' you could have had:
* #define HAVE_HURR 1 / #undef HAVE_DURR
* #define HAVE_HURR / #undef HAVE_DURR
* #define CONFIG_HURR 1 / #undef CONFIG_DURR
* #define HAVE_HURR 1 / #define HAVE_DURR 0
* #define CONFIG_HURR 1 / #define CONFIG_DURR 0
All is now uniform and uses:
* #define HAVE_HURR 1
* #define HAVE_DURR 0
We like definining to 0 as opposed to `undef` bcause it can help spot typos
and is very helpful when doing big reorganizations in the code.
[1]: http://xkcd.com/927/ related
Keep track of the default values directly, instead of creating a new
instance of the option struct just to get the defaults.
Also get rid of the special handling of m_obj_desc.init_options.
Instead, handle it purely by the option parser. Originally, I wanted to
handle --vo=opengl-hq and --vo=direct3d_shaders with this (by making
them aliases to the real VOs with a different preset), but since --vo
=opengl-hq=help prints the wrong values (as consequence of the
simplification), I'm not doing that, and instead use something
different.
Was disabled by default, was never used, internal support was
inconsistent and poor, and there has been virtually no interest in
creating translations.
And I don't even think that a terminal program should be translated.
This is something for (hypothetical) GUIs.
Reverts a small change made in commit ed9295c. This is needed, because
otherwise mplayer.c/update_video_attached_pic() thinks it never has to
update the picture after initialization. (Maybe there would be more
elegant ways to handle this, but not without adding extra state.)
This commit adds the --force-window option, which will cause mpv always
to create a window when started. This can be useful when pretending that
mpv is a GUI application (which it isn't, but users pretend anyway), and
playing audio files would run mpv in the background without giving a
window to control it.
This doesn't actually create the window immediately: it only does so
only after initializing playback and when it is clear that there won't
be any actual video. This could be a problem when starting slow or
completely stuck network streams (mpv would remain frozen in the
background), or if video initialization somehow is stuck forever in
an in-between state (like when the decoder doesn't output a video
frame, but doesn't return an error either). Well, we can pretend only
so much that mpv is a GUI application.
Before, a VO could easily refuse to respond to VOCTRL_REDRAW_FRAME,
which means the VO wouldn't redraw OSD and window contents, and the
player would appear frozen to the user. This was a bit stupid, and makes
dealing with some corner cases much harder (think of --keep-open, which
was hard to implement, because the VO gets into this state if there are
no new video frames after a seek reset).
Change this, and require VOs to always react to VOCTRL_REDRAW_FRAME.
There are two aspects of this: First, behavior after a (successful)
vo_reconfig() call, but before any video frame has been displayed.
Second, behavior after a vo_seek_reset().
For the first issue, we define that sending VOCTRL_REDRAW_FRAME after
vo_reconfig() should clear the window with black. This requires minor
changes to some VOs. In particular vaapi makes this horribly
complicated, because OSD rendering is bound to a video surface. We
create a black dummy surface for this purpose.
The second issue is much simpler and works already with most VOs: they
simply redraw whatever has been uploaded previously. The exception is
vdpau, which has a complicated mechanism to track and filter video
frames. The state associated with this mechanism is completely cleared
with vo_seek_reset(), so implementing this to work as expected is not
trivial. For now, we just clear the window with black.
Until now, mouse positions were just passed to the core as-is, even if
the mouse coordinates didn't map to any useful coordinate space, like
OSD coordinates. Lua scripting (used by the OSC, the only current user
of mouse input) had to translate mouse coordinates manually to OSD space
using mp_get_osd_mouse_pos(). This actually didn't work correctly in
cases mouse coordinates didn't map to OSD (like vo_xv): the mouse
coordinates the OSC got were correct, but input.c was still expecting
"real" mosue coordinates for mouse areas.
Fix this by converting to OSD coordinates before passing the mouse
position to the core.
A wayland output based on shared memory. This video output is useful for x11
free systems, because the current libGL in mesa provides GLX symbols. It is also
useful for embedded systems where the wayland backend for EGL is not
implemented like the raspberry pi.
At the moment only rgb formats are supported, because there is still no
compositor which supports planar formats like yuv420p. The most used compositor
at the moment, weston, supports only BGR0, BGRA and BGR16 (565).
The BGR16 format is the fastest to convert and render without any noticeable
differences to the BGR32 formats. For this reason the current (very basic)
auto-detection code will prefer the BGR16 format. Also the weston source code
indicates that the preferred format is BGR16 (RGB565).
There are 2 options:
* default-format (yes|no) Which uses the BGR32 format
* alpha (yes|no) For outputting images and videos with transparencies
Until now, video output levels (obscure feature, like using TV screens
that require RGB output in limited range, similar to YUY) still required
handling of VOCTRL_SET_YUV_COLORSPACE. Simplify this, and use the new
mp_image_params code. This gets rid of some code. VOCTRL_SET_YUV_COLORSPACE
is not needed at all anymore in VOs that use the reconfig callback. The
result of VOCTRL_GET_YUV_COLORSPACE is now used only used for the
colormatrix related properties (basically, for display on OSD). For
other VOs, VOCTRL_SET_YUV_COLORSPACE will be sent only once after config
instead of twice.
This affects VOs which just reuse the mp_image from draw_image() to
return screenshots. The aspect of these images is never different
from the aspect the screenshots should be, so there's no reason to
adjust the aspect in these cases.
Other VOs still need it in order to restore the original image
attributes.
This requires some changes to the video filter code to make sure that
the aspect in the passed mp_images is consistent.
The changes in mplayer.c and vd_lavc.c are (probably) not strictly
needed for this commit, but contribute to consistency.
Add --video-align-x/y, --video-pan-x/y, --video-scale options and
properties. See the additions to the manpage for description and
semantics.
These transformations are intentionally done on top of panscan. Unlike
the (now removed) --panscanrange option, this doesn't affect the default
panscan behavior. (Although panscan itself becomes kind of useless if
the new options are used.)
This is based on the MPlayer VA API patches. To be exact it's based on
a very stripped down version of commit f1ad459a263f8537f6c from
git://gitorious.org/vaapi/mplayer.git.
This doesn't contain useless things like benchmarking hacks and the
demo code for GLX interop. Also, unlike in the original patch, decoding
and video output are split into separate source files (the separation
between decoding and display also makes pixel format hacks unnecessary).
On the other hand, some features not present in the original patch were
added, like screenshot support.
VA API is rather bad for actual video output. Dealing with older libva
versions or the completely broken vdpau backend doesn't help. OSD is
low quality and should be rather slow. In some cases, only either OSD
or subtitles can be shown at the same time (because OSD is drawn first,
OSD is prefered).
Also, libva can't decide whether it accepts straight or premultiplied
alpha for OSD sub-pictures: the vdpau backend seems to assume
premultiplied, while a native vaapi driver uses straight. So I picked
straight alpha. It doesn't matter much, because the blending code for
straight alpha I added to img_convert.c is probably buggy, and ASS
subtitles might be blended incorrectly.
Really good video output with VA API would probably use OpenGL and the
GL interop features, but at this point you might just use vo_opengl.
(Patches for making HW decoding with vo_opengl have a chance of being
accepted.)
Despite these issues, decoding seems to work ok. I still got tearing
on the Intel system I tested (Intel(R) Core(TM) i3-2350M). It was also
tested with the vdpau vaapi wrapper on a nvidia system; however this
was rather broken. (Fortunately, there is no reason to use mpv's VAAPI
support over native VDPAU.)
This is in theory more correct with respect to hardware decoding. With
hardware decoding, the VOs play the role of the video surface allocator,
and nothing is allowed to reference surfaces past the VO lifetime. But
in theory waiting_mpi could be a reference to a HW video surface, so it
should be relased before the VO is uninitialized.
Nothing should change from user perspective.
mpv --vo=opengl:help now works.
Remove the vo_opengl inline help text. The new code can list option
names for you, but that's it. Refer to the manpage if you have trouble.
Instead of handling colorspaces with VFCTRLs/VOCTRLs, make them part of
the normal video format negotiation. The colorspace is passed down like
other video params with config/reconfig calls.
Forcing colorspaces (via the --colormatrix options and properties) is
handled differently too: if it's changed, completely reinit the video
chain. This is slower and requires a precise seek to the same position
to perform an update, but it's simpler and less bug-prone. Considering
switching the colorspace at runtime by user-interaction is a rather
obscure feature, this is a good change.
The colorspace VFCTRLs and VOCTRLs are still kept. The VOs rely on it,
and would have to be changed to get rid of them. We'll do that later,
and convert them incrementally instead of in one go.
Note that controlling the output range now always works on VO level.
Basically, this means you can't get vf_scale to output full-range YUV
for whatever reason. If that is really wanted, it should be a vf_scale
option. the previous behavior didn't make too much sense anyway.
This commit fixes a few bugs (such as playing RGB video and converting
that to YUV with vf_scale - a recent commit broke this and forced the
VO to display YUV as RGB if possible), and might introduce some new
ones.
For some reason mp_fifo specifically handled double clicks, and other
than that was a pointless wrapper around input.c functionality.
Move the double click handling into input.c, and get rid of mp_fifo. Add
some compatibility wrappers, because so much VO code uses these
functions. Where struct mp_fifo is still used it's just a casted
struct input_ctx.
Before this commit, mouse movement events emitted a special command
("set_mouse_pos"), which was specially handled in command.c. This was
once special-cased to the dvdnav and menu code, and did nothing after
libmenu and dvdnav were removed.
Change it so that mouse movement triggers a pseudo-key ("MOUSE_MOVE"),
which then can be bound to an arbitrary command. The mouse position is
now managed in input.c. A command which actually needs the mouse
position can use either mp_input_get_mouse_pos() or mp_get_osd_mouse_pos()
to query it. The former returns raw window-space coordinates, while the
latter returns coordinates transformed to OSD- space. (Both are the same
for most VOs, except vo_xv and vo_x11, which can't render OSD in
window-space. These require extra code for mapping mouse position.)
As of this commit, there is still nothing that uses mouse movement, so
MOUSE_MOVE is mapped to "ignore" to silence warnings when moving the
mouse (much like MOUSE_BTN0).
Extend the concept of input sections. Allow multiple sections to be
active at once, and organize them as stack. Bindings from the top of
the stack are preferred to lower ones.
Each section has a mouse input section associated, inside which mouse
events are associated with the bindings. If the mouse pointer is
outside of a section's mouse area, mouse events will be dispatched to
an input section lower on the stack of active sections. This is intended
for scripting, which is to be added later. Two scripts could occupy
different areas of the screen without conflicting with each other. (If
it turns out that this mechanism is useless, we'll just remove it
again.)
The filter chain and the video ouputs have config() functions. They are
strictly limited to transfering the video size and format. Other
parameters (like color levels) have to be transferred separately.
Improve upon this by introducing a separate set of reconfig() functions,
which use mp_image_params to carry format parameters. This struct
contains all image format related parameters from config(), plus
additional parameters such as colorspace.
Change vf_rotate to use it, as well as vo_opengl. vf_rotate is just
an example/test case, but vo_opengl will need it later.
The intention is also to get rid of VOCTRL_SET_YUV_COLORSPACE. This
information is now handed to the VOs via reconfig(). The getter,
VOCTRL_GET_YUV_COLORSPACE, will still be needed though.
This code calculates the source/display video rectangle for scaling with
most VOs. It's responsible for clipping the display rectangle against
the screen and adjusting the source rectangle accordingly.
Until now, it assumed that the video was centered on the screen. Change
this so that any rectangle is possible. Basically, the clipping is
extended to two sides (e.g. left and right), instead of handling both at
the same time.
The rounding behavior slightly changes. It seems to be slightly better
than before. On the other hand, the video is not strictly centered
anymore (due to different rounding on either side). When using panscan
controls, the video can "jitter" by 1 or 2 pixels around the center as
the panscan value is changed.
This was used by some VOs to do timing of cursor autohiding, but we
recently moved that out of the VOs. Even though this mechanism might
be a good idea and could be needed again in future (but for what?),
it's unused now. So better just get rid of it.
Use VOCTRL_CHECK_EVENTS instead. Change the remaining VOs to use it.
Only vo_sdl and vo_caca actually need this, and vo_null, vo_lavc, and
vo_image had stubs only.
Instead of having separate callbacks for each backend-handled feature
(like MPGLContext.fullscreen, MPGLContext.border, etc.), pass the
VOCTRL responsible for this directly to the backend. This allows
removing a bunch of callbacks, that currently must be set even for
optional/lesser features (like VOCTRL_BORDER).
This requires changes to all VOs using gl_common, as well as all
backends that support gl_common.
Also introduce VOCTRL_CHECK_EVENTS. vo.check_events is now optional.
VO backends can use VOCTRL_CHECK_EVENTS instead to implementing
check_events. This has the advantage that the event handling code in
VOs doesn't have to be duplicated if vo_control() is used.
gl_video.c contains all rendering code, gl_lcms.c the .icc loader and
creation of 3D LUT (and all LittleCMS specific code). vo_opengl.c is
reduced to interfacing between the various parts.
If that's what the user asked for, there's no reason to introduce
special cases to ignore it on fullscreen.
The old behavior is perhaps accidentally due to the fact that aspect
calculations used to be disabled in windowed mode, rather than a
deliberate decision.
Remove lots of weird logic and dead code.
The only difference is that when specifying a monitor aspect ratio, it
will always upscale and never downscale.
Separate the video output options from the big MPOpts structure and also only
pass the new mp_vo_opts structure to the vo backend.
Move video_driver_list into mp_vo_opts
Removes almost every global variabel in vo.h and puts them in a special struct
in MPOpts for video output related options.
Also we completly remove the options/globals pts and refresh rate because
they were unused.
When paused, --cursor-autohide worked with a precision of 500ms, which
is the main loop's default sleep time when paused. Cursor hiding is
polled in x11_common, and the main loop never called the X11 code at
the right time. Fix this by allowing the VO to set a time when it
should be called next.
VFCAP_OSD was used to determine at runtime whether the VO supports OSD
rendering. This was mostly unused. vo_direct3d had an option to disable
OSD (was supposed to allow to force auto-insertion of vf_ass, but we
removed that anyway). vo_opengl_old could disable OSD rendering when a
very old OpenGL version was detected, and had an option to explicitly
disable it as well.
Remove VFCAP_OSD from everything (and some associated logic). Now the
vo_driver.draw_osd callback can be set to NULL to indicate missing OSD
support (important so that vo_null etc. don't single-step on OSD
redraw), and if OSD support depends on runtime support, the VO's
draw_osd should just do nothing if OSD is not available.
Also, do not access vo->want_redraw directly. Change the want_redraw
reset logic for this purpose, too. (Probably unneeded, vo_flip_page
resets it already.)
This allowed making the player switch the monitor video mode when
creating the video window. This was a questionable feature, and with
today's LCD screens certainly not useful anymore. Switching to a random
video mode (going by video width/height) doesn't sound too useful
either.
I'm not sure about the win32 implementation, but the X part had several
bugs. Even in mplayer-svn (where x11_common.c hasn't been receiving any
larger changes for a long time), this code is buggy and doesn't do the
right thing anyway. (And what the hell _did_ it do when using multiple
physical monitors?)
If you really want this, write a shell script that calls xrandr before
and after calling mpv.
vo_sdl still can do mode switching, because SDL has native support for
it, and using it is trivial. Add a new sub-option for this.
You can just use --wid=0 if you really want this.
This only worked/works for X11, and even then it might interact badly
with most desktop environments. All the option did was setting --wid to
0, and the property did nothing.
mpv -ao help and mpv -vo help shouldn't show the encoding outputs (named
"lavc" on both cases). Also make it impossible to select these manually
when not encoding.
Basically, move vo_opengl above the other VOs (except vo_vdpau). This
changes preferences on Windows and Linux.
Move vo_opengl_old further down and make it the last fallback (before
vo_x11).
vo_caca is crap (no pun intended), and should never be autoprobed.
-x/-y were rather useless and obscure. The only use I can see is
forcing a specific aspect ratio without having to calculate the aspect
ratio float value (although --aspect takes values of the form w:h).
This can be also done with --geometry and --no-keepaspect. There was
also a comment that -x/-y is useful for -vm, although I don't see how
this is useful as it still messes up aspect ratio.
-xy is mostly obsolete. It does two things: a) set the window width to
a pixel value, b) scale the window size by a factor. a) is already done
by --autofit (--autofit=num does exactly the same thing as --xy=num, if
num >= 8). b) is not all that useful, so we just drop that
functionality.
--autofit=WxH sets the window size to a maximum width and/or height,
without changing the window's aspect ratio.
--autofit-larger=WxH does the same, but only if the video size is
actually larger than the window size that would result when using
the --autofit=WxH option with the same arguments.
This also means the option is verified on program start, not when the VO
is created. The actual code becomes a bit more complex, because the
screen width/height is not available at program start.
The actual parsing code is still the same, with its unusual sscanf()
usage.
Now the calculations of the final display size are done after the filter
chain. This makes the difference between display aspect ratio and window
size a bit more clear, especially in the -xy case.
With an empty filter chain, the behavior of the options should be the
same, except that they don't affect vo_image and vo_lavc anymore.
Change the entire filter API to use reference counted images instead
of vf_get_image().
Remove filter "direct rendering". This was useful for vf_expand and (in
rare cases) vf_sub: DR allowed these filters to pass a cropped image to
the filters before them. Then, on filtering, the image was "uncropped",
so that black bars could be added around the image without copying. This
means that in some cases, vf_expand will be slower (-vf gradfun,expand
for example).
Note that another form of DR used for in-place filters has been replaced
by simpler logic. Instead of trying to do DR, filters can check if the
image is writeable (with mp_image_is_writeable()), and do true in-place
if that's the case. This affects filters like vf_gradfun and vf_sub.
Everything has to support strides now. If something doesn't, making a
copy of the image data is required.
Slices allowed filtering or drawing video in horizontal bands or
blocks. This allowed working on the video in smaller units. In theory,
this could bring a performance win by lowering cache pressure, as you
didn't have to keep the whole video frame in cache while filtering,
only the slice.
In practice, the slice code path was barely used for the following
reasons:
- Multithreaded decoding with ffmpeg didn't use slices. The ffmpeg
slice callback was disabled, because it can be called from another
thread, and the mplayer video chain is not thread-safe.
- There was nothing that would turn "full" images into appropriate
slices, so slices were rarely used.
- Most filters didn't actually support slices.
On the other hand, supporting slices lead to code duplication and more
complex code in general. I made some experiments and didn't find any
actual measurable performance improvements when using slices. Even
ffmpeg removed slices based filtering from libavfilter in favor of
simpler code.
The most broken thing about the slices code path is that slices can't
be queued, like it is done for images in vo.c.
Remove VOCTRL_DRAW_IMAGE and always set vo_driver.draw_image in VOs.
Make draw_image mandatory: change some VOs (like vo_x11) to support it,
and remove the image-to-slices fallback in vf_vo.
Remove vo_driver.is_new. This member indicated whether draw_image is
supported unconditionally, which is now always the case.
draw_image_pts is a hack until the video filter chain is changed to
include the PTS as field in mp_image. Then vo_vdpau and vo_lavc will
be changed to use draw_image.
This mainly serves as a fallback for platforms where nothing better is
available; also as a debugging help. Both the audio and video driver are
not first class - the audio driver lacks delay detection, and the video
driver only supports a single YUV color space.
Configure options: --disable-sdl2 to disable SDL 2.0+ detection,
--disable-sdl to disable SDL 1.2+ detection. Both options need to be
specified to turn off SDL support entirely.
Finish renaming directories and moving files. Adjust all include
statements to make the previous commit compile.
The two commits are separate, because git is bad at tracking renames
and content changes at the same time.
Also take this as an opportunity to remove the separation between
"common" and "mplayer" sources in the Makefile. ("common" used to be
shared between mplayer and mencoder.)
Tis drops the silly lib prefixes, and attempts to organize the tree in
a more logical way. Make the top-level directory less cluttered as
well.
Renames the following directories:
libaf -> audio/filter
libao2 -> audio/out
libvo -> video/out
libmpdemux -> demux
Split libmpcodecs:
vf* -> video/filter
vd*, dec_video.* -> video/decode
mp_image*, img_format*, ... -> video/
ad*, dec_audio.* -> audio/decode
libaf/format.* is moved to audio/ - this is similar to how mp_image.*
is located in video/.
Move most top-level .c/.h files to core. (talloc.c/.h is left on top-
level, because it's external.) Park some of the more annoying files
in compat/. Some of these are relicts from the time mplayer used
ffmpeg internals.
sub/ is not split, because it's too much of a mess (subtitle code is
mixed with OSD display and rendering).
Maybe the organization of core is not ideal: it mixes playback core
(like mplayer.c) and utility helpers (like bstr.c/h). Should the need
arise, the playback core will be moved somewhere else, while core
contains all helper and common code.
wm4
Martin Herkt
Stefano Pigozzi
Alexander Preisinger
Rudolf Polzer