If the graphics driver doesn't provide its own OpenGL implementation,
applications get Microsoft's OpenGL emulation. Even if it should be the
case that it's not strictly a software renderer, it provides OpenGL 1.1
only, no shaders in any form, and has other limitations that make it
almost completely useless for mplayer.
vo_gl will now fail at initialization if a software renderer is
detected. This is the same behavior as vo_gl_nosw. Making this the
default behavior is preferable, because it will simplify positioning
vo_gl in the VO autoprobe list (video_out_drivers[]). Also, vo_gl_nosw
exists only if X11 support is configured.
Move gl in place of gl_nosw. Add the "sw" suboption to vo_gl to allow
using vo_gl even if a software renderer is detected.
vo_gl_nosw is now completely equivalent to vo_gl. It is kept in order
not to break too many user configurations, but should be considered
deprecated.
Modify the YUV->RGB conversion matrix to take into account the
difference between the same color value being x/255 in a 8-bit texture
and x*256/65535 in a 16-bit texture (actually things are stored as
x*4/65535 for 10-bit color, but that can be ignored here). This 0.4 %
difference in the shader float value could make shades of gray in
10-bit (or generally more than 8 bit) YUV produce RGB values with
green slightly higher than red/blue.
The "backend" suboption allows selecting the GUI backend used by vo_gl.
Normally, it's auto-selected, but sometimes it's desireable to explicitly
select it.
Remove the gl_sdl VO. This can now be done by using: --vo=gl:backend=sdl
This is based on svn commit 34438, and tries to be compatible with it. The
undocumented numeric backend names serve this purpose. (They are
undocumented because names are preferred.)
Fix spelling.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@34006 b3059339-0415-0410-9bf9-f77b7e298cf2
Fix disabled code.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@34007 b3059339-0415-0410-9bf9-f77b7e298cf2
Remove pointless pointer indirection for shader program strings.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@34016 b3059339-0415-0410-9bf9-f77b7e298cf2
Remove usage of glColor3f, there is not really a point in it.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@34149 b3059339-0415-0410-9bf9-f77b7e298cf2
This is an experiment.
The change probably doesn't matter much.
One issue with the old code was that "large" images caused each sub-image
to be created and rendered as a new texture. "Large" in this case means
larger than 32x32 pixels, which actually isn't very large with screen
sizes beyond 1500x1000 pixels. This means rendering a simple subtitle for
a fullscreened video may allocate many small textures, one for each glyph.
On the other hand, the old code could be fixed by tuning the texture sizes
for "modern" work loads.
Also, the new code uses less deprecated OpenGL features and draws all
sub-images in one batch.
There are two possible issues the new code could cause:
- Drivers could have performance issues with the larger texture sizes and
the number of glTexSubImage2D calls on it
- There is only one EOSD texture, which could become full (it's enlarged
on demand, but restricted by driver texture size limitations)
It has been reported that this is faster on OSX with ATI GPUs than the old
code.
This affects only the "new" VO API. The config() title argument was barely
used, and it's hardcoded to "MPlayer" in vf_vo.c. The X11 and the Cocoa
GUI backends, which are the only ones properly supporting window titles,
ignored this argument. Remove the title argument.
Add the vo_get_window_title function. All GUI VOs are supposed to use it
for the window title.
Remove code refreshing window contents after events such as resize
from vo_vdpau, vo_gl and vo_xv. Instead have them simply set a flag
indicating that a refresh is needed, and have the player core perform
that refresh by doing an OSD redraw. Also add support for updating the
OSD contents over existing frames during slow-but-not-paused playback.
The VOs now also request a refresh if parameters affecting the picture
change (equalizer settings, colormatrix, VDPAU deinterlacing setting).
Even previously the picture was typically redrawn with the new
settings while paused because new OSD messages associated with setting
changes triggered a redraw, but this did not happen if OSD was turned
off.
A minor imperfection is that now window system events can trigger a
single one-frame step forward when using vo_xv after pausing so that
vo_xv does not yet have a copy of the current image. This could be
fixed but I think it's not important enough to bother.
Previously the core sent VFCTRL_REDRAW_OSD to change OSD contents over
the current frame. Change this to VFCTRL_REDRAW_FRAME followed by
normal EOSD and OSD drawing calls, then vo_flip_page(). The new
version supports changing EOSD contents for libass-rendered subtitles
and simplifies the redraw support code needed per VO. vo_xv doesn't
support EOSD changes because it relies on vf_ass to render EOSD
contents earlier in the filter chain.
vo_xv logic is additionally simplified because the previous commit
removed the need to track the status of current and next images
separately (now each frame is guaranteed to become "visible" soon
after we receive it as "next", with no VO code running in the interval
between).
The GL_LUMINANCE16 texture format had only 8 bit precision on Mesa
based drivers. This caused heavy degradation of the image when playing
formats with more than 8 bits per pixel, such as 10 bit h264. Use
GL_R16 instead, which at least Mesa and Nvidia drivers actually
implement as 16 bit textures. Since sampling from this texture format
doesn't return anything meaningful in the other color components
(unlike luminance textures), the shader code has to be slightly
changed.
GL_R16 requires the GL_ARB_texture_rg extension. Check for it, and fall
back to the old texture format if it's not available.
The low precision of the GL_LUMINANCE16 format has just been fixed in
upstream Mesa, but it'll take a while before that fix is available in
distros.
Some functionality provided by the windowing backend (such as x11,
win32) is optional. The function pointers in MPGLContext are NULL if
the functionality is not implemented. Check them before calling them,
instead of crashing. This happened at least on Windows with the
"vo_ontop" command.
The register combiner color conversion is broken and seems to use a
slightly incorrect color matrix (the image looks gray-ish). Completely
remove all code related to nVidia register combiners.
Unless you have an ancient nVidia GPU, there's no reason to prefer register
combiners over fragment shaders. Users with ancient GPUs without fragment
shader support can just use -vo xv.
Passing yuv=1 (register combiners) as sub option will print a warning and
use yuv=2 (fragment shaders) instead.
Using the ati-hack and force-pbo suboptions (both can be enabled
automatically when particular ATI drivers are detected) could lead to
segfaults due to incorrect length calculation.
The problem is that width*((bpp+7)/8) == width*(bpp+7)/8 doesn't hold
true in general. The old code used bpp/8, because bpp was always
guaranteed to be divisible by 8. When commit 20256a8a64 fixed bugs
around 10 bit pixel formats, this assumption was broken, and resulted
in out of bounds memory accesses.
Additionally, the color values that were used to clear image borders
were incorrect and showed up as pink borders on the right/bottom sides
of the video when playing 10 bit content. Make the clear value
approximately correct; the borders are still filled with a single byte
value even though formats with 9-16 bits should be cleared with 2-byte
values with the low byte 0.
This commit also contains some other minor cleanups with no functional
changes.
Now all windowing specific code is in gl_common.c.
init_mpglcontext() used to set dummy callbacks for non-optional windowing
callbacks. Remove these, as they only lead to confusion.
The actual work is done by the existing SDL code. This commit merely
makes it possible to explicitly select the SDL backend ("gl" alone
uses SDL only if the X11 and win32 backends are not available, while
the new "gl_sdl" always forces use of SDL).
Also disable YUV conversion method autodetection when SDL is used.
This gets rid of a temporary window that appears for a moment and is
immediately closed again. SDL can't deal with the VOFLAG_HIDDEN flag,
which is needed to create an invisible GL context (when the
autodetection is run, the video size isn't yet known to the VO, and
creating a window then resizing would cause problems with window
placement). Instead always pick the fragment program method by default
(yuv=2). This change affects the normal "gl" VO too if it chooses the
SDL backend.
Apparently this is fully redundant given the global "noaspect" option.
Refuse this suboption, and output an error message suggesting the
correct option.
Reformat vo_gl.c, gl_common.c, gl_common.h.
Remove all global variables and move them into a context struct (the
Windows and SDL backends still refer to global_vo though).
Change vo_gl.c to use the "new" VO API.
Rewrite control of the colorspace and input/output level parameters
used in YUV-RGB conversions, replacing VO-specific suboptions with new
common options and adding configuration support to more cases.
Add new option --colormatrix which selects the colorspace the original
video is assumed to have in YUV->RGB conversions. The default
behavior changes from assuming BT.601 to colorspace autoselection
between BT.601 and BT.709 using a simple heuristic based on video
size. Add new options --colormatrix-input-range and
--colormatrix-output-range which select input YUV and output RGB range.
Disable the previously existing VO-specific colorspace and level
conversion suboptions in vo_gl and vo_vdpau. Remove the
"yuv_colorspace" property and replace it with one named "colormatrix"
and semantics matching the new option. Add new properties matching the
options for level conversion.
Colorspace selection is currently supported by vo_gl, vo_vdpau, vo_xv
and vf_scale, and all can change it at runtime (previously only
vo_vdpau and vo_xv could). vo_vdpau now uses the same conversion
matrix generation as vo_gl instead of libvdpau functionality; the main
functional difference is that the "contrast" equalizer control behaves
somewhat differently (it scales the Y component around 1/2 instead of
around 0, so that contrast 0 makes the image gray rather than black).
vo_xv does not support level conversion. vf_scale supports range
setting for input, but always outputs full-range RGB.
The value of the slave properties is the policy setting used for
conversions. This means they can be set to any value regardless of
whether the current VO supports that value or whether there currently
even is any video. Possibly separate properties could be added to
query the conversion actually used at the moment, if any.
Because the colorspace and level settings are now set with a single
VF/VO control call, the return value of that is no longer used to
signal whether all the settings are actually supported. Instead code
should set all the details it can support, and ignore the rest. The
core will use GET_YUV_COLORSPACE to check which colorspace details
have been set and which not. In other words, the return value for
SET_YUV_COLORSPACE only signals whether any kind of YUV colorspace
conversion handling exists at all, and VOs have to take care to return
the actual state with GET_YUV_COLORSPACE instead.
To be changed in later commits: add missing option documentation.
vo_gl.c hardcoded the assumption that YUV formats always use 1 byte per
component. This corrupted the output when playing 10 bit h264 video.
Only the PBO code path was affected. PBOs are normally unused, unless ATI
is detected, or the force-pbo option is used.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@33502 b3059339-0415-0410-9bf9-f77b7e298cf2
Fix clear/border color of chroma texture for 9- and 10-bit formats.
Avoids pink borders for those formats.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@33504 b3059339-0415-0410-9bf9-f77b7e298cf2
Make mp_get_chroma_shift() simpler/more generic and add an argument
to get the per-component bit depth.
Use this to check more properly for supported formats in
gl and gl2 vos (only 8 and 16 bit are supported, 9 and 10 are not).
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@33452 b3059339-0415-0410-9bf9-f77b7e298cf2
The "gamma" setting only changed red gamma. Fix it to change all of
red, green and blue gamma.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@32895 b3059339-0415-0410-9bf9-f77b7e298cf2
llvmpipe, while only slow instead of insanely slow, is a software
renderer. Recognize it as such and disable -vo gl_nosw on it.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@32719 b3059339-0415-0410-9bf9-f77b7e298cf2
Select a stereo pixel format for window when Quadbuffer OpenGL was
selected as 3D mode.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@32620 b3059339-0415-0410-9bf9-f77b7e298cf2
Independent tests indicate that GLX_STEREO is working fine on
supported hardware.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31647 b3059339-0415-0410-9bf9-f77b7e298cf2
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31648 b3059339-0415-0410-9bf9-f77b7e298cf2
Move declaration to where it is actually used.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31636 b3059339-0415-0410-9bf9-f77b7e298cf2
Use a more sensible variable name.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31637 b3059339-0415-0410-9bf9-f77b7e298cf2
Dual-license gl_common and vo_gl under the LGPL v2.1 or later as
an alternative to the GPL license.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31375 b3059339-0415-0410-9bf9-f77b7e298cf2
Allow LGPL for csputils as well, they were previously part of gl_common
and are still an important part of it.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@31376 b3059339-0415-0410-9bf9-f77b7e298cf2
wm4
Uoti Urpala
reimar
Uoti Urpala
cboesch
cehoyos