Remove keybindings for properties that have been removed because they
can no longer be used even if you restore them.
Replace dvb-channel-name with dvbin-channel-switch-offset.
Fix the L keybinding: it was bound to cycle-values loop when loop was an
alias for loop-playlist, but now it's an alias for loop-file.
"osd" was a command that cycles osd-level from 0 to 3.
Keep only the newest I show-text "${filename}" from mpv 0.26, the mpv
0.5 line for it is a mistake because it was bound to that in input.conf
from a749c61437 (2012) until 2e84934be7 (2017), while mpv 0.5 is from
2014.
I removed the previous WHEEL_UP and WHEEL_DOWN bindings because they are
duplicate, and it appears that they were already bound to seek 10 before
7897f79217.
There was a discrepancy in what the keybind was advertised to do in the
manual, and what the comment in input.conf described it to be doing. It
makes very little sense to add a keybind that changes the default and
doesn't allow you to get back to the default. This keybind is much more
useful if it toggles between yes/force instead of no/force.
ac725764ec originally added these to
prevent those profiles from having auto as a value. However the auto
value was removed in 53d032374d later. So
having these lines here no longer serves any purpose since the default
value for slang is NULL once again (vlang/alang were never needed here).
The goal is to provide simple to understand quality/performance level
profiles for the users.
Instead of default and gpu-hq profile. There main profiles were added:
- fast: can run on any hardware
- default: balanced profile between quality and performance
- high-quality: out of the box high quality experience. Intended
mostly for dGPU.
Summary of three profiles, including default one:
[fast]
scale=bilinear
cscale=bilinear (implicit)
dscale=bilinear
dither=no
correct-downscaling=no
linear-downscaling=no
sigmoid-upscaling=no
hdr-compute-peak=no
[default] (implicit mpv defaults)
scale=lanczos
cscale=lanczos
dscale=mitchell
dither-depth=auto
correct-downscaling=yes
linear-downscaling=yes
sigmoid-upscaling=yes
hdr-compute-peak=yes
[high-quality] (inherits default options)
scale=ewa_lanczossharp
cscale=ewa_lanczossharp (implicit)
hdr-peak-percentile=99.995
hdr-contrast-recovery=0.30
allow-delayed-peak-detect=no
deband=yes
scaler-lut-size=8
We were over-enthusiastic when introducing --no-config into the
autocompletions. When autocompleting profiles, you actually need the
config, because that's where the profiles come from.
zsh is untested - I don't use it.
Prevents transient brightness spikes on scene transitions at the cost of
sometimes forcing an extra indirect pass (in particular, when
downscaling). But on GPUs powerful enough to run gpu-hq, the extra
indirect pass shouldn't matter too much. This option mostly exists for
weak iGPUs.
Wheel being seek by default is very unintuitive and surprising to a lot
of users. It seems to be one of the things most consistently complained
about in the default UI. I change this on all of my devices, and so do
many others.
It's trivial for users who like the old behavior to change it back.
The old name is pretty bad and users mistakenly think it has something
to do with selecting forced subtitles (that would be
--subs-fallback-forced). Instead of giving it such a generic name, make
it clearer that this has to do specifically with forced sub events
which is only relevant for a small minority of subtitles.
This is higher quality but comes with a slight performance hit,
especially for weaker iGPUs, so I don't want to enable it out of the box
even when --hdr-compute-peak=auto.
This only existed as essentially a workaround for meson's behavior and
to maintain compatibility with the waf build. Since waf put everything
in a generated subdirectory, we had to put make a subdirectory called
"generated" in the source for meson so stuff could go to the right
place. Well now we don't need to do that anymore. Move the meson.build
files around so they go in the appropriate place in the subdirectory of
the source tree and change the paths of the headers accordingly. A
couple of important things to note.
1. mpv.com now gets made in build/player/mpv.com (necessary because of
a meson limitation)
2. The macos icon generation path is shortened to
TOOLS/osxbundle/icon.icns.inc.
Reading the config when we're just interested in the option list
(not sure why mpv does that anyway) only has the potential to mess
this process up when it prints errors or the user has funny options
like msg-level or log-file set, so avoid doing so.
It has been odd that ctrl+h toggles `auto` for hwdecs even though we
always recommend people start with `auto-safe`, and `auto` will attempt
various hwdecs that can fail so badly we can't fall back to software
decoding.
With the change to more exhaustively attempt to use hwdecs, it is now
easier to get into situations where these fragile hwdecs will get
attempted in basic scenarios, like pressing ctrl+h.
So it is high time to default to `auto-safe`.
Treat them as http:// and https:// respectively. This allows to play files
on webdav archives directly on KDE, avoiding the (extremely slow) local
copying performed by kio.
This reverts commit 04f0b0abe4.
It's not a good idea to unify the names only for visibility, while
keeping secondary-* for everything else.
This needs a bit more thought before we allow secondary sub to be
visible on its own.
Adds --sub-visibility choices 'primary-only' for only displaying the
primary subtitle track, and 'secondary-only' for only displaying
secondary subtitle track.
Removes --secondary-sub-visibility and displays a message telling the
user to use --sub-visibility=yes/primary-only instead.
These changes make it so that the default 'sub-visibility' bind 'v'
cycles through all the 'sub-visibility' choices, 'no', 'yes',
'primary-only', and 'secondary-only'.
If bash_completion wasn't installed, _filedir wouldn't be defined which
led to all filename-based completions to error out. Specifically
autocompletion would fail when a filename was expected and when
bash_completion wasn't installed. Now we fall back to `compgen -f` if
_filedir fails. According to _filedir's comments, compgen doesn't
handle files with spaces well, but it is still better to complete most
files than none.
Without this entry, when starting mpv as a flatpak application on
elementaryOS, the Dock icon would get duplicated, as if the application
was detached from its launcher. This entry fixes that by allowing the
dock to associate the app's window with the desktop entry.
Fixes#9109
The window-scale property mirrors the respective option (not the
effective scale derived from the current window size), and as such
setting its value to the same value it had before has no effect.
Specifically - the window will not resize.
This is consistent as far as property-option bridge behavior goes,
but we do end up with an issue that we can't set an arbitrary scale
and expect the window to always resize accordingly.
We do also have a current-window-scale property which does reflect
the actual window size, however, it's been read-only till now.
This commit makes current-window-scale RW so that it's now always
possible to set an arbitrary scale and expect the window to resize
accordingly (without affecting window-scale - like manual resize).
Also, mention window-scale no-effect-if-not-changed at the docs.
Based on code by @Dudemanguy from commit 873ae0d, with same effect.
This reverts commit 873ae0de2a.
The next commit will restore this functionality, with the
following differences from the reverted commit:
- Smaller and simpler code change.
- On bad scale: use "Invalid value" (compared to "no such property").
- Doesn't combine the docs for window-scale and current-window-scale.
- Doesn't remove the docs for window-scale behavior prior to 0.31.0.
Somewhat confusingly, mpv has both a window-scale option and a
current-window-scale property. The documentation lists window-scale
under properties (and it is technically is one), but at its core it is
actually an option which means it behaves subtly different. Options in
mpv are runtime-configurable, but they only change anything if the value
of the option itself changes. window-scale is an option and not meant to
keep track of the actual scale of the window (intended behavior
introduced by d07b7f0). This causes window-scale to do nothing in
certain cases (ex: the window is manually resized and window-scale is
set to 1.00 again). This is logical and consistent with the behavior of
the rest of the mpv options, but it also makes it a poor candidate for
setting the mpv window scale dynamically.
As a remedy, we can just make current-window-scale writeable instead.
current-window-scale is intended to always report the actual scale of
the window and keep track of any window size changes made by the user.
By making this property also writeable, it allows the user to have more
intuitive behavior (i.e. setting current-window-scale to 1.00 always
sets the window to a scale of 1). Additionally, the default input.conf
is changed to use current-window-scale instead of window-scale. The
window-scale documentation under property list is removed since it is
already documented under options and users should probably set the
current-window-scale property instead in most cases.
When trying to use completion for mpv binaries specified with some shell
glob, e.g. ~/dev/mpv/build/mpv, the current code doesn't substitute the
homedir prefix into the path name, resulting in runtime errors about
the file '~/dev/mpv/build/mpv' not being found.
The simple fixed is to use $~var instead of $var whenever expanding the
filename, which performs the same globbing that would otherwise be
performed when executing the command.
The generate_xxx() helpers, once defined, would appear as
user-visible functions; this would lead to unexpected and
confusing completion suggestions for gene<tab> after having
once run mpv in that shell.
This PR adds the prefix '_mpv_' to all completion functions
as a convention to make them less user-visible and less likely
to collide with other packages.
The bash completion seems to be working decently at this point, so I
feel comfortable caching the options output to improve the performance
of the completion.
Right now we are generating the fully option list before doing
anything else. That makes filename completion significantly slower
than it was before, for no gain. It's easy to only generate the
option list when it's actually needed.
I also know I could additionally cache the option list across
invocations, but I'm not doing that yet to make testing easier.
While we've had a zsh completion script for a while, we haven't had
one for bash. This one is reasonably comprehensive, although there are
improvements one could imagine for certain options.
Guido Cella
llyyr
Niklas Haas
Dudemanguy
Kacper Michajłow
Philip Langdale
James Cuzella
sfan5
rcombs
OlesyaGerasimenko
Alby
Vitaly Zaitsev
The-head-obamid
Oğuz Ersen
Avi Halachmi (:avih)
Ripose
Arthur Williams
Stan Janssen
Zsolt Vadasz
soredake
Alexandre Iooss
Ed Santiago
wm4
der richter