Don't print the URL that is opened twice. stream.c and stream_lavf.c
each printed it once. Remove the logging from stream_lavf.c, and move
the log call to a more interesting point.
The libavformat rtmp protocol's "timeout" option has two problems:
1) Unlike all other protocols, it's in seconds and not microseconds
2) It enables "listen" mode, which breaks playback
Make the --network-timeout do nothing in the rtmp case.
Fixes#1704.
Fix return types and return values to make them more consistent. Some
reformatting and making code more concise.
In stream_reconnect(), avoid the additional mp_cancel_test() call by
moving the "connection lost" message below the mp_cancel_wait() call,
which effectively leads to the same behavior when the stream was already
canceled. (The goal is not to show the message in this case.)
Merge stream_seek_long() into stream_seek(). It was the only caller.
Always clear the eof flag on seeks.
Reduce access to stream internals in cache.c and stream_lavf.c.
In my opinion, libavformat should be doing this. But a patch handling a
very safe case rejected, so I suppose we have to do it manually. (This
patch was only escaping spaces, which can never work because they break
the basic syntax of the HTTP protocol.)
This commit attempts to do 2 things:
- Try to guess whether libavformat will use the URL for http. This is
not always trivial, because some protocols will recursively pass part
of the user URL to http in some way.
- Try to fix invalid URLs. We fix only the simplest case: only
characters that are never valid are escaped. This excludes invalid
escape codes, which happen with freestanding '%' characters.
Fixes#1495.
Basically, this will mark the demuxer as seekable with rtmp* and mmsh
protocols. These protocols have network-level time seeking, and whether
you can seek on the byte level does not matter.
Until now, seeking was typically only enabled because of the cache, and
a (nonsensical) warning was shown accordingly.
It still could happen that the server doesn't actually support thse
requests (or simply rejects them), so this is somewhat imperfect.
Normally, we pass libavformat demuxers a wrapped mpv stream. But in some
cases, such as HLS and RTSP, we let libavformat open the stream itself.
In these cases, set typical network properties like useragent according
to the mpv options.
(We still don't set it for the cases where libavformat opens other
streams on its own, e.g. when opening the companion .sub file for .idx
files - not sure if we maybe should always set these options.)
Apparently there's an use for this; see #1178.
I won't redocument obscure FFmpeg features, so add a hint to the
manpage that some protocols are documented in FFmpeg instead.
This mechanism originates from MPlayer's way of dealing with blocking
network, but it's still useful. On opening and closing, mpv waits for
network synchronously, and also some obscure commands and use-cases can
lead to such blocking. In these situations, the stream is asynchronously
forced to stop by "interrupting" it.
The old design interrupting I/O was a bit broken: polling with a
callback, instead of actively interrupting it. Change the direction of
this. There is no callback anymore, and the player calls
mp_cancel_trigger() to force the stream to return.
libavformat (via stream_lavf.c) has the old broken design, and fixing it
would require fixing libavformat, which won't happen so quickly. So we
have to keep that part. But everything above the stream layer is
prepared for a better design, and more sophisticated methods than
mp_cancel_test() could be easily introduced.
There's still one problem: commands are still run in the central
playback loop, which we assume can block on I/O in the worst case.
That's not a problem yet, because we simply mark some commands as being
able to stop playback of the current file ("quit" etc.), so input.c
could abort playback as soon as such a command is queued. But there are
also commands abort playback only conditionally, and the logic for that
is in the playback core and thus "unreachable". For example,
"playlist_next" aborts playback only if there's a next file. We don't
want it to always abort playback.
As a quite ugly hack, abort playback only if at least 2 abort commands
are queued - this pretty much happens only if the core is frozen and
doesn't react to input.
Because that might be a bad idea.
Note that remote playlists still can use any protocol marked with
is_safe and is_network, because the case of http-hosted playlists
containing URLs using other streaming protocols is not unusual.
Until now, you had to use --load-unsafe-playlists or --playlist to get
playlists loaded. Change this and always load playlists by default.
This still attempts to reject unsafe URLs. For example, trying to invoke
libavdevice pseudo-demuxer is explicitly prevented. Local paths and any
http links (and some more) are always allowed.
bstr.c doesn't really deserve its own directory, and compat had just
a few files, most of which may as well be in osdep. There isn't really
any justification for these extra directories, so get rid of them.
The compat/libav.h was empty - just delete it. We changed our approach
to API compatibility, and will likely not need it anymore.
Don't reconnect to the cache (since the cached stream already handles
reconnection). This is necessary, because since commit 0b428e44 the
"streaming" field (which also controls whether attempting to reconnect
makes sense at all) is inherited to the cache stream wrapper.
Also, let the stream reset its own position on reconnect. This removes
some assumptions and messy handling from the reconnect function.
Make sure the cache is dropped on reconnect. This takes care of
readjusting the stream position if necessary. (Also drop the cache on
DVB channel switching commands.)
Use OPT_KEYVALUELIST() for all places where AVOptions are directly set
from mpv command line options. This allows escaping values, better
diagnostics (also no more "pal"), and somehow reduces code size.
Remove the old crappy option parser (av_opts.c).
This didn't work, because the timebase was wrong. According to the
ffmpeg doxygen, if the stream index is -1 (which is what we used), the
timebase is AV_TIME_BASE. But this didn't work, and it really expected
the stream's timebase. Quite "surprising", since this feature
(avio_seek_time) is used by rtmp only.
Fixing this properly is too hard, so hack-fix our way around it.
STREAM_CTRL_SEEK_TO_TIME is also used by DVD/BD, so a new
STREAM_CTRL_AVSEEK is added. We simply pass-through the request
verbatim.
(Again.)
This time, we simply make it event-based, as it should be. This is done
for both demuxer metadata and stream metadata.
For some ogg-over-icy streams, 2 updates are reported on stream start.
This is because libavformat reports an update right on start, while
including the same info in the "static" metadata. I don't know if that's
a bug or a feature.
While I'm not very fond of "const", it's important for declarations
(it decides whether a symbol is emitted in a read-only or read/write
section). Fix all these cases, so we have writeable global data only
when we really need.
For some reason, we support writeable streams. (Only encoding uses that,
and the use of it looks messy enough that I want to replace it with FILE
or avio today.)
It's a chaos: most streams do not actually check the mode parameter like
they should. Simplify it, and let streams signal availability of write
mode by setting a flag in the stream info struct.
Stop using it in most places, and prefer STREAM_CTRL_GET_SIZE. The
advantage is that always the correct size will be used. There can be no
doubt anymore whether the end_pos value is outdated (as it happens often
with files that are being downloaded).
Some streams still use end_pos. They don't change size, and it's easier
to emulate STREAM_CTRL_GET_SIZE using end_pos, instead of adding a
STREAM_CTRL_GET_SIZE implementation to these streams.
Make sure int64_t is always used for STREAM_CTRL_GET_SIZE (it was
uint64_t before).
Remove the seek flags mess, and replace them with a seekable flag. Every
stream must set it consistently now, and an assertion in stream.c checks
this. Don't distinguish between streams that can only be forward or
backwards seeked, since we have no such stream types.
Since m_option.h and options.h are extremely often included, a lot of
files have to be changed.
Moving path.c/h to options/ is a bit questionable, but since this is
mainly about access to config files (which are also handled in
options/), it's probably ok.
Mainly for debugging. Usually, we just set options for all possible
protocols, and we can't really know whether a certain protocol is used
beforehand. That's also the reason why avio_open2() takes a dictionary,
instead of letting the user set options directly with av_opt_set(). Or
in other words, we don't know whether an option that could be set is an
error or not, thus we print the messages only at verbose level.
The way the url_options field was handled was not entirely sane: it's
actually a flexible array member, so it points to garbage for streams
which do not initialize this member (it just points to the data right
after the struct, which is garbage in theory and practice). This was
not actually a problem, since the field is only used if priv_size is
set (due to how this stuff is used). But it doesn't allow setting
priv_size only, which might be useful in some cases.
Also, make the protocols array not a fixed size array. Most stream
implementations have only 1 protocol prefix, but stream_lavf.c has
over 10 (whitelists ffmpeg protocols). The high size of the fixed
size protocol array wastes space, and it is _still_ annoying to
add new prefixes to stream_lavf (have to bump the maximum length),
so make it arbitrary length.
The two changes (plus some more cosmetic changes) arte conflated into
one, because it was annoying going over all the stream implementations.
Move the URL parsing code from m_option.c to stream.c, and simplify it
dramatically. This code originates from times when http code used this,
but now it's just relict from other stream implementations reusing this
code. Remove the unused bits and simplify the rest.
stream_vcd is insane, and the priv struct is different on every
platform, so drop the URL parsing. This means you can't specify a track
anymore, only the device. (Does anyone use stream_vcd? Not like this
couldn't be fixed, but it doesn't seem worth the effort, especially
because it'd require potentially touching platform specific code.)
These were printed only with -v. Most streams had them set to useless
or redundant values, so it's just badly maintained bloat.
Since we remove the "author" field too, and since this may have
copyright implications, we add the contents of the author fields to
the file headers, except if the name is already part of the file header.
This removes the dependency on DEMUXER_TYPE_* and the file_format
parameter from the stream open functions.
Remove some of the playlist handling code. It looks like this was
needed only for loading linked mov files with demux_mov (which was
removed long ago).
Delete a minor bit of dead network-related code from stream.c as well.
Dmitrij D. Czarkoff
wm4
Joschka Tillmanns
Marcin Kurczewski
Stefano Pigozzi