The ytdl wrapper can resolve web links to playlists. This playlist is
passed as big memory:// blob, and will contain further quite normal web
links. When playback of one of these playlist entries starts, ytdl is
called again and will resolve the web link to a media URL again.
This didn't work if playlist entries resolved to EDL URLs. Playback was
rejected with a "potentially unsafe URL from playlist" error. This was
completely weird and unexpected: using the playlist entry directly on
the command line worked fine, and there isn't a reason why it should be
different for a playlist entry (both are resolved by the ytdl wrapper
anyway). Also, if the only EDL URL was added via audio-add or sub-add,
the URL was accessed successfully.
The reason this happened is because the playlist entries were marked as
STREAM_SAFE_ONLY, and edl:// is not marked as "safe". Playlist entries
passed via command line directly are not marked, so resolving them to
EDL worked.
Fix this by making the ytdl hook set load-unsafe-playlists while the
playlist is parsed. (After the playlist is parsed, and before the first
playlist entry is played, file-local options are reset again.) Further,
extend the load-unsafe-playlists option so that the playlist entries are
not marked while the playlist is loaded.
Since playlist entries are already verified, this should change nothing
about the actual security situation.
There are now 2 locations which check load_unsafe_playlists. The old one
is a bit redundant now. In theory, the playlist loading code might not
be the only code which sets these flags, so keeping the old code is
somewhat justified (and in any case it doesn't hurt to keep it).
In general, the security concept sucks (and always did). I can for
example not answer the question whether you can "break" this mechanism
with various combinations of archives, EDL files, playlists files,
compromised sites, and so on. You probably can, and I'm fully aware that
it's probably possible, so don't blame me.
Originally, vo_gpu/vo_opengl considered the case of Nvidia proprietary
drivers, which required vdpau/GLX, and Intel open source drivers, which
require vaapi/EGL. Since window creation and GPU context creation are
inseparable in mpv's internal API, it had to pick the correct API very
early, or hardware decoding wouldn't work. "x11probe" was introduced for
this reason. It created a GLX context (without showing the window yet),
and checked whether vdpau was available. If yes, it used GLX, if not, it
continued probing x11/EGL. (Obviously it couldn't always fail on GLX
without vdpau, which is why it was a separate "probe" backend.)
Years passed, and now the situation is different. Vdpau is dead. Nvidia
drivers and libavcodec now provide CUDA interop, which requires EGL, and
fixes some of the vdpau problems. AMD drivers now provide vaapi, which
generally works better than vdpau. Intel didn't change.
In particular, vaapi provides working HEVC Main10 support. In theory, it
should work on vdpau too, with quality reduction (no 10 bit surfaces),
but I couldn't get it to work.
So always prefer EGL. And suddenly hardware decoding works. This is
actually rather important, because HEVC is unfortunately on the rise,
despite shitty encoders and unoptimized decoders. The latter may mean
that hardware decoding works better than libavcodec.
This should have been done a long, long time ago.
The "program" property could switch between TS programs. It was rather
complex and rather obscure (even if you deal with TS captures, you
usually don't need it). If anyone actually needs it (did anyone ever
attempt to even use it?), it should be rewritten. The demuxer should
export a program list, and the frontend should handle the "cycling"
logic.
Linux analog TV support (via tv://) was excessively complex, and
whenever I attempted to use it (cameras or loopback devices), it didn't
work well, or would have required some major work to update it. It's
very much stuck in the analog past (my favorite are the frequency tables
in frequencies.c for analog TV channels which don't exist anymore).
Especially cameras and such work fine with libavdevice and better than
tv://, for example:
mpv av://v4l2:/dev/video0
(adding --profile=low-latency --untimed even makes it mostly realtime)
Adding a new input layer that targets such "modern" uses would be
acceptable, if anyone is interested in it. The old TV code is just too
focused on actual analog TV.
DVB is rather obscure, but has an active maintainer, so don't remove it.
However, the demux/stream ctrl layer must go, so remove controls for
channel switching. Most of these could be reimplemented by using the
normal method for option runtime changes.
This removes anything related to DVD/BD/CD that negatively affected the
core code. It includes trying to rewrite timestamps (since DVDs and
Blurays do not set packet stream timestamps to playback time, and can
even have resets mid-stream), export of chapters, stream languages,
export of title/track lists, and all that.
Only basic seeking is supported. It is very much possible that seeking
completely fails on some discs (on some parts of the timeline), because
timestamp rewriting was removed.
Note that I don't give a shit about optical media. If you want to watch
them, rip them. Keeping some bare support for DVD/BD is the most I'm
going to do to appease the type of lazy, obnoxious users who will care.
There are other players which are better at optical discs.
stream_dvd.c contained large amounts of ancient, unmaintained code,
which has been historically moved to libdvdnav. Basically, it's full of
low level parsing of DVD on-disc structures.
Kill it for good. Users can use the remaining dvdnav support (which
basically operates in non-menu mode). Users have reported that
libdvdread sometimes works better, but this is just libdvdnav's problem
and not ours.
This is a straightforward parallel implementation of error diffusion
algorithms in compute shader. Basically we use single work group with
maximal possible size to process the whole image. After a shift
mapping we are able to process all pixels column by column.
A large ring buffer are allocated in shared memory to speed things up.
However the size of required shared memory depends linearly on the
height of video window (or screen height in fullscreen mode). In case
there is no enough shared memory, it will fallback to `--dither=fruit`.
The maximal allowed work group size is hardcoded as 1024. Ideally we
could query `GL_MAX_COMPUTE_WORK_GROUP_INVOCATIONS`. But for whatever
reason, it seems most high end card from nvidia and amd support only
the minimal required value, so I guess we can stick to it for now.
I assume (but cannot confirm) that VA-AP-API is in fact a typo, because
most if not all search engine results related to it are from mpv's manual
page.
By changing this to VA-API and clarifying that this requires VA-API support
on a system to use it, we can hopefully make it clear to unsuspecting
Windows users that this is not the filter they're looking for.
Concerns #6690.
This allows to select the drm mode using a string specification. You
can either select the the preferred mode, the mode with the highest
resolution, by specifying WxH[@R] or by its index in the list of modes
as before.
This was implemented by using OPT_STRING_VALIDATE for drm-mode,
instead of OPT_INT. Using a string here also prepares for future
additions to drm-mode that aim to allow specifying a mode by its
resolution.
It is useful when debugging to be able to force atomic off, or as a
workaround if atomic breaks for some user. Legacy modesetting is less
likely to break by virtue of being a less complex API.
half of the materials we used were deprecated with macOS 10.14, broken
and not supported by run time changes of the macOS theme. furthermore
our styling names were completely inconsistent with the actually look
since macOS 10.14, eg ultradark got a lot brighter and couldn't be
considered ultradark anymore.
i decided to drop the old option --macos-title-bar-style and rework
the whole mechanism to allow more freedom. now materials and appearance
can be set separately. even if apple changes the look or semantics in
the future the new options can be easily adapted.
Manual changes done:
* Merged the interface-changes under the already master'd changes.
* Moved the hwdec-related option changes to video/decode/vd_lavc.c.
Rather than the linear cd/m^2 units, these (relative) logarithmic units
lend themselves much better to actually detecting scene changes,
especially since the scene averaging was changed to also work
logarithmically.
In theory our "eye adaptation" algorithm works in both ways, both
darkening bright scenes and brightening dark scenes. But I've always
just prevented the latter with a hard clamp, since I wanted to avoid
blowing up dark scenes into looking funny (and full of noise).
But allowing a tiny bit of over-exposure might be a good thing. I won't
change the default just yet (better let users test), but a moderate
value of 1.2 might be better than the current 1.0 limit. Needs testing
especially on dark scenes.
The previous approach of using an FIR with tunable hard threshold for
scene changes had several problems:
- the FIR involved annoying hard-coded buffer sizes, high VRAM usage,
and the FIR sum was prone to numerical overflow which limited the
number of frames we could average over. We also totally redesign the
scene change detection.
- the hard scene change detection was prone to both false positives and
false negatives, each with their own (annoying) issues.
Scrap this entirely and switch to a dual approach of using a simple
single-pole IIR low pass filter to smooth out noise, while using a
softer scene change curve (with tunable low and high thresholds), based
on `smoothstep`. The IIR filter is extremely simple in its
implementation and has an arbitrarily user-tunable cutoff frequency,
while the smoothstep-based scene change curve provides a good, tunable
tradeoff between adaptation speed and stability - without exhibiting
either of the traditional issues associated with the hard cutoff.
Another way to think about the new options is that the "low threshold"
provides a margin of error within which we don't care about small
fluctuations in the scene (which will therefore be smoothed out by the
IIR filter).
Instead of desaturating towards luma, we desaturate towards the
per-channel tone mapped version. This essentially proves a smooth
roll-off towards the "hollywood"-style (non-chromatic) tone mapping
algorithm, which works better for bright content, while continuing to
use the "linear" style (chromatic) tone mapping algorithm for primarily
in-gamut content.
We also split up the desaturation algorithm into strength and exponent,
which allows users to use less aggressive desaturation settings without
affecting the overall curve.
Too many broken hardware decoders. Noticed wrong decoding of a video
file encoded with x262 on RX Vega when using VAAPI (Mesa 18.3.2).
Looks fine with swdec and a cheap hardware BD player.
Reverts 017f3d0674
--record-file is nice, but only sometimes. If you watch some sort of
livestream which you want to record, it's actually much nicer not to
record what you're currently "seeing", but anything you're receiving.
This option has been deprecated upstream for a long time, probably
doesn't even work anymore, and won't work moving forwards as we replace
the vulkan code by libplacebo wrappers.
I haven't removed the option completely yet since in theory we could
still add support for e.g. a native glslang wrapper in the future. But
most likely the future of this code is deletion.
As an aside, fix an issue where the man page didn't mention d3d11.
This commit bumps the libmpv version to 1.102
drm-osd-plane -> drm-draw-plane
drm-video-plane -> drm-drmprime-video-plane
drm-osd-size -> drm-draw-surface-size
"draw plane", as in the plane that OpenGL draws to, whether it be
video + OSD or just OSD.
"drmprime video plane", as in the plane used for hwdec video imported
via drmprime.
"draw surface size", as in the size of the surface used for the draw plane
The new names are invariant whether or not hwdec_drmprime_drm is being
used or not. The original naming was very confusing, as when doing
regular rendering (swdec or vaapi) the video would be displayed on the
"OSD plane", and the "Video plane" would remain unused.
Add general primary/overlay plane option to drm-osd-plane-id and
drm-video-plane-id, so that the user can just request any usable
primary or overlay plane for either of these two options. This should
be somewhat more user-friendly (especially as neither of these two
options currently have a useful help function), as usually you would
only be interested in the type of the plane, and not exactly which
plane gets picked.
Despite their place in the tree, hwdecs can be loaded and used just
fine by the vulkan GPU backend.
In this change we add Vulkan interop support to the cuda/nvdec hwdec.
The overall process is mostly straight forward, so the main observation
here is that I had to implement it using an intermediate Vulkan buffer
because the direct VkImage usage is blocked by a bug in the nvidia
driver. When that gets fixed, I will revist this.
Nevertheless, the intermediate buffer copy is very cheap as it's all
device memory from start to finish. Overall CPU utilisiation is pretty
much the same as with the OpenGL GPU backend.
Note that we cannot use a single intermediate buffer - rather there
is a pool of them. This is done because the cuda memcpys are not
explicitly synchronised with the texture uploads.
In the basic case, this doesn't matter because the hwdec is not
asked to map and copy the next frame until after the previous one
is rendered. In the interpolation case, we need extra future frames
available immediately, so we'll be asked to map/copy those frames
and vulkan will be asked to render them. So far, harmless right? No.
All the vulkan rendering, including the upload steps, are batched
together and end up running very asynchronously from the CUDA copies.
The end result is that all the copies happen one after another, and
only then do the uploads happen, which means all textures are uploaded
the same, final, frame data. Whoops. Unsurprisingly this results in
the jerky motion because every 3/4 frames are identical.
The buffer pool ensures that we do not overwrite a buffer that is
still waiting to be uploaded. The ra_buf_pool implementation
automatically checks if existing buffers are available for use and
only creates a new one if it really has to. It's hard to say for sure
what the maximum number of buffers might be but we believe it won't
be so large as to make this strategy unusable. The highest I've seen
is 12 when using interpolation with tscale=bicubic.
A future optimisation here is to synchronise the CUDA copies with
respect to the vulkan uploads. This can be done with shared semaphores
that would ensure the copy of the second frames only happens after the
upload of the first frame, and so on. This isn't trivial to implement
as I'd have to first adjust the hwdec code to use asynchronous cuda;
without that, there's no way to use the semaphore for synchronisation.
This should result in fewer intermediate buffers being required.
Since linear downscaling makes sense to handle independently from
linear/sigmoid upscaling, we split this option up. Now,
linear-downscaling is its own option that only controls linearization
when downscaling and nothing more. Likewise, linear-upscaling /
sigmoid-upscaling are two mutually exclusive options (the latter
overriding the former) that apply only to upscaling and no longer
implicitly enable linear light downscaling as well.
The old behavior was very confusing, as evidenced by issues such
as #6213. The current behavior should make much more sense, and only
minimally breaks backwards compatibility (since using linear-scaling
directly was very uncommon - most users got this for free as part of
gpu-hq and relied only on that).
Closes#6213.
Someone on IRC pointed out that the default stats bindings weren't
documented in the interactive control section of the manual, so
let's add them with a short mention and a reference to the STATS
section of the manual.
by default the pixel format creation falls back to software renderer
when everything fails. this is mostly needed for VMs. additionally one
can directly request an sw renderer or exclude it entirely.
The demuxer cache is the only cache now. Might need another change to
combat seeking failures in mp4 etc. The only bad thing is the loss of
cache-speed, which was sort of nice to have.
