With the previous commit, we can just access option values directly now
and avoid a lot of complication. Note that the mp_read_option_raw call
for edition requires calling mp_get_config_group since that option needs
to live in MPOpts.
This exposes whether a video track is detected as an image, which is
useful for profile conditions, property expansion and lavfi-complex.
The lavf demuxer sets image to true when the existing check detects an
image.
When the lavf demuxer fails, the mf one guesses if the file is an image
by its extension, so sh->image is set to true when the mf demuxer
succeds and there's only one file.
The mkv demuxer just sets image to true for any attached picture.
The timeline demuxer just copies the value of image from source to
destination. This sets image to true for attached pictures, standalone
images and images added with !new_stream in EDL playlists, but it is
imperfect since you could concatenate multiple images in an EDL playlist
(which should be done with the mf demuxer anyway). This is good enough
anyway since the comment of the modified function already says it is
"Imperfect and arbitrary".
Unfortunately, this functionality in large part based on a struct
member that was made private in FFmpeg/FFmpeg@7489f63281
in May. Unfortunately, this was not noticed during review.
This reverts commit 0862664ac9.
This exposes whether a video track is detected as an image. This is
useful for profile conditions, property expansion and lavfi-complex, and
is more accurate than any detection even Lua scripts can perform, since
they can't differentiate between images and videos without container-fps
and audio and with duration 1 (which is the duration set by the mf
demuxer with the default --mf-fps=1).
The lavf demuxer image check is moved to where the number of frames is
available for comparison, and is modified to check the number of frames
and duration instead of the video codec. This doesn't misdetect videos
in a codec commonly used for images (e.g. mjpeg) as images, and can
detect images in a codec commonly used for videos (e.g. 1-frame gifs).
pix files are also now detected as images, while before they weren't
since the condition was checking if the AVInputFormat name ends with
_pipe, and alias_pix doesn't.
Both nb_frames and codec_info_nb_frames are checked because nb_frames is
0 for some video codecs (hevc, av1, vc1, mpeg1video, vp9 if forcing
--demuxer=lavf), and codec_info_nb_frames is 1 for others (mpeg, mpeg4,
wmv3).
The duration is checked as well because for some uncommon codecs and
containers found in FFMpeg's FATE suite, libavformat returns nb_frames =
0 and codec_info_nb_frames = 1. For some of them it even returns
duration = 0, so they are blacklisted in order to never be considered
images.
The extra codecs that would have to be blacklisted without checking the
duration are AV_CODEC_ID_4XM, AV_CODEC_ID_BINKVIDEO,
AV_CODEC_ID_DSICINVIDEO, AV_CODEC_ID_ESCAPE130, AV_CODEC_ID_MMVIDEO,
AV_CODEC_ID_NUV, AV_CODEC_ID_RL2, AV_CODEC_ID_SMACKVIDEO and
AV_CODEC_ID_XAN_WC3, while the containers are film-cpk, ivf and ogg.
The lower limit for duration is 10 because that's the duration of
1-frame gifs.
Streams with codec_info_nb_frames 0 are not considered images because
vp9 and av1 have nb_frames = 0 and codec_info_nb_frames = 0, and we
can't rely on just the duration to detect them because they could be
livestreams without an initial duration, and actually even if we could
for these codecs libavformat returns huge negative durations like
-9223372036854775808.
Some more images in the FATE suite that are really frames cut from a
video in an uncommon codec and container, like cine/bayer_gbrg8.cine,
could be detected by allowing codec_info_nb_frames = 0, but then any
present and future video codec with nb_frames = 0 and
codec_info_nb_frames = 0 would need to be added to the blacklist. Some
even have duration > 10, so to detect these images the duration check
would have to be removed, and all the previously mentioned extra codecs
and containers would have to be added added to the blacklists, which
means that images that use them (if they exist anywhere) will never be
detected. These FATE images aren't detected as such by mediainfo either
anyway, nor can a Lua script reliably detect them as images since they
have container-fps and duration > 0 and != 1, and you probably will
never see files like them anywhere else.
For attached pictures the lavf demuxer always set image to true, which
is necessary because they have duration > 10. There is a minor change in
behavior for which audio with attached pictures now has mf-fps as
container-fps instead of unavailable, but this makes it consistent with
external cover art, which was already being assigned mf-fps.
When the lavf demuxer fails, the mf one guesses if the file is an image
by its extension, so sh->image is set to true when the mf demuxer
succeds and there's only one file.
Even if you add a video's file type to --mf-type and open it with the mf
protocol, only the first frame is used, so setting image to true is
still accurate.
When converting an image to the extensions listed in demux/demux_mf.c,
tga and pam files are currently the only ones detected by the mf demuxer
rather than lavf. Actually they are detected with the image2 format, but
it is blacklisted; see d0fee0ac33.
The mkv demuxer just sets image to true for any attached picture.
The timeline demuxer just copies the value of image from source to
destination. This sets image to true for attached pictures, standalone
images and images added with !new_stream in EDL playlists, but it is
imperfect since you could concatenate multiple images in an EDL playlist
(which should be done with the mf demuxer anyway). This is good enough
anyway since the comment of the modified function already says it is
"Imperfect and arbitrary".
Before this commit, the user could specify a printf format string
which wasn't verified, and could result in:
- Undefined behavior due to missing or non-matching arguments.
- Buffer overflow due to untested result length.
The offending code was added at commit 103a9609 (2002, mplayer svn):
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@4566 b3059339-0415-0410-9bf9-f77b7e298cf2
It moved around but was not modified meaningfully until now.
Now we reject all conversion specifiers at the format except %%
and a simple subset of the valid specifiers. Also, we now use
snprintf to avoid buffer overflow.
The format string is provided by the user as part of mf:// URI.
Report and initial patch by Stefan Schiller.
Patch reviewed by @jeeb, @sfan5, Stefan Schiller.
Well, whatever. Only results in an error message being printed, because
there is no other error reporting mechanism, and the general policy is
to keep trying with the rest of the data (i.e. not report EOF).
mf:// has an obscure feature that lets you pass a list of filenames
separated by newlines. Who knows whether anyone is using that. It opened
these listfiles with fopen(), so the recent stream origin bullshit
doesn't operate on it. Fix this by using the mpv internal stream API
instead. Unfortunately there is no fgets(), so write an ad-hoc one. (An
implementation of line reading via "stream" is still in demux_playlist,
but it's better to keep it quarantined there.)
mpv has a very weak and very annoying policy that determines whether a
playlist should be used or not. For example, if you play a remote
playlist, you usually don't want it to be able to read local filesystem
entries. (Although for a media player the impact is small I guess.)
It's weak and annoying as in that it does not prevent certain cases
which could be interpreted as bad in some cases, such as allowing
playlists on the local filesystem to reference remote URLs. It probably
barely makes sense, but we just want to exclude some other "definitely
not a good idea" things, all while playlists generally just work, so
whatever.
The policy is:
- from the command line anything is played
- local playlists can reference anything except "unsafe" streams
("unsafe" means special stream inputs like libavfilter graphs)
- remote playlists can reference only remote URLs
- things like "memory://" and archives are "transparent" to this
This commit does... something. It replaces the weird stream flags with a
slightly clearer "origin" value, which is now consequently passed down
and used everywhere. It fixes some deviations from the described policy.
I wanted to force archives to reference only content within them, but
this would probably have been more complicated (or required different
abstractions), and I'm too lazy to figure it out, so archives are now
"transparent" (playlists within archives behave the same outside).
There may be a lot of bugs in this.
This is unfortunately a very noisy commit because:
- every stream open call now needs to pass the origin
- so does every demuxer open call (=> params param. gets mandatory)
- most stream were changed to provide the "origin" value
- the origin value needed to be passed along in a lot of places
- I was too lazy to split the commit
Fixes: #7274
If SEEK_FORWARD is set, a demuxer should skip to the next frame if the
timestamp does not fall on the start of a frame. If that flag is not
set, it should always seek to the first frame before the target
timestamp (or the first frame in the file).
iive agreed to relicense things that are still in mpv to LGPLv2.1. So
change the licenses of the affected files, and rename the configure
switch for LGPL mode to --enable-preliminary-lgpl2.
(The "preliminary" part will probably be removed from the configure
switch soon as well.)
Also player/main.c hasn't had GPL parts since a few commits ago.
This currently is only limited to Android. Its stdlib contains the
things that mpv's POSIX check checks for, but unfortunately not
glob().
This fixes Android compilation broken in 70a70b9da .
cehoyos, who did not agree to the relicensing, added bcb5c78ce3. If
there was copyright, we consider it gone, because the table changed. It
does not map file extension to a FourCC anymore, and codecs.conf is
gone. The new mapping is a libavcodec codec name (happens to be the same
as the file extension).
The same applies to commits 60ecafec, b749836b, 5b3e3be1. None of these
authors were contacted. These were before the code was replaced with a
table (in d0326807). The parts outside of demux_mf.c were removed a long
time ago. Like in the previous comment, we don't think any copyright
applies at least to the new code (at least after the FourCC removal).
iive authored 0aa37a0d, which is probably still left in some form, and
makes demux_mf.c "LGPL 3 or later".
stream_avdevice.c (unrelated) has been marked as LGPL before.
Similar purpose as f34e1a0dee.
Somehow this is much more natural too, and needs less code.
This breaks runtime updates to duration. This could easily be fixed, but
no important demuxer does this anyway. Only demux_raw and demux_disc
might (the latter for BD/DVD). For the latter it might actually have
some importance when changing titles at runtime (I guess?), but guess
what, I don't care.
This is more uniform, and potentially gets rid of some past copyrights.
It might be that this subtly changes caching behavior (it seems before
this, it synced to the demuxer if the length was unknown, which is not
what we want.)
Because it's kind of dumb. (But not sure if it was worth the trouble.)
For stream_file.c, we add new explicit fields. The rest are rather
special uses and can be killed by comparing the stream impl. name.
The changes to DVD/BD/CD/TV are entirely untested.
Don't access MPOpts directly, and always use the new m_config.h
functions for accessing them in a thread-safe way.
The goal is eventually removing the mpv_global.opts field, and the
demuxer/stream-layer specific hack that copies MPOpts to deal with
thread-safety issues.
This moves around a lot of options. For one, we often change the
physical storage location of options to make them more localized,
but these changes are not user-visible (or should not be). For
shared options on the other hand it's better to do messy direct
access, which is worrying as in that somehow renaming an option
or changing its type would break code reading them manually,
without causing a compilation error.
Instead of passing through double float timestamps opaquely, pass real
timestamps. Do so by always setting a valid timebase on the
AVCodecContext for audio and video decoding.
Specifically try not to round timestamps to a too coarse timebase, which
could round off small adjustments to timestamps (such as for start time
rebasing or demux_timeline). If the timebase is considered too coarse,
make it finer.
This gets rid of the need to do this specifically for some hardware
decoding wrapper. The old method of passing through double timestamps
was also a bit questionable. While libavcodec is not supposed to
interpret timestamps at all if no timebase is provided, it was
needlessly tricky. Also, it actually does compare them with
AV_NOPTS_VALUE. This change will probably also reduce confusion in the
future.
Ever since a change in mplayer2 or so, relative seeks were translated to
absolute seeks before sending them to the demuxer in most cases. The
only exception in current mpv is DVD seeking.
Remove the SEEK_ABSOLUTE flag; it's not the implied default. SEEK_FACTOR
is kept, because it's sometimes slightly useful for seeking in things
like transport streams. (And maybe mkv files without duration set?)
DVD seeking is terrible because DVD and libdvdnav are terrible, but
mostly because libdvdnav is terrible. libdvdnav does not expose seeking
with seek tables. (Although I know xbmc/kodi use an undocumented API
that is not declared in the headers by dladdr()ing it - I think the
function is dvdnav_jump_to_sector_by_time().) With the current mpv
policy if not giving a shit about DVD, just revert our half-working seek
hacks and always use dvdnav_time_search(). Relative seeking might get
stuck sometimes; in this case --hr-seek=always is recommended.
This is mainly a refactor. I'm hoping it will make some things easier
in the future due to cleanly separating codec metadata and stream
metadata.
Also, declare that the "codec" field can not be NULL anymore. demux.c
will set it to "" if it's NULL when added. This gets rid of a corner
case everything had to handle, but which rarely happened.
The demuxer infrastructure was originally single-threaded. To make it
suitable for multithreading (specifically, demuxing and decoding on
separate threads), some sort of tripple-buffering was introduced. There
are separate "struct demuxer" allocations. The demuxer thread sets the
state on d_thread. If anything changes, the state is copied to d_buffer
(the copy is protected by a lock), and the decoder thread is notified.
Then the decoder thread copies the state from d_buffer to d_user (again
while holding a lock). This avoids the need for locking in the
demuxer/decoder code itself (only demux.c needs an internal, "invisible"
lock.)
Remove the streams/num_streams fields from this tripple-buffering
schema. Move them to the internal struct, and protect them with the
internal lock. Use accessors for read access outside of demux.c.
Other than replacing all field accesses with accessors, this separates
allocating and adding sh_streams. This is needed to avoid race
conditions. Before this change, this was awkwardly handled by first
initializing the sh_stream, and then sending a stream change event. Now
the stream is allocated, then initialized, and then declared as
immutable and added (at which point it becomes visible to the decoder
thread immediately).
This change is useful for PR #2626. And eventually, we should probably
get entirely of the tripple buffering, and this makes a nice first step.
There's no reason why parts of this demuxer would be in a separate
source file. The existence of this code is already somewhat questionable
anyway, so it may as well be dumped into a single file.
Even stranger that demux.c included mf.h for no reason (it was an
artifact from 2002 when the architecture was uncleaner).
The TV code pretends to be part of stream/, but it's actually demuxer
code too. The audio_in code is shared between the TV code and
stream_radio.c, so stream_radio.c needs a small hack until stream.c is
converted.
This used to be needed to access the generic stream header from the
specific headers, which in turn was needed because the decoders had
access only to the specific headers. This is not the case anymore, so
this can finally be removed again.
Also move the "format" field from the specific headers to sh_stream.
Instead of having each demuxer do it (only demux_mkv actually did...),
let generic code determine whether the file is seekable. This requires
adding exceptions to demuxers where the stream is not seekable, but the
demuxer is.
Sort-of try to improve handling of unseekable files in the player. Exit
early if the file is determined to be unseekable, instead of resetting
all decoders and then performing a pointless seek.
Add an exception to allow seeking if the file is not seekable, but the
stream cache is enabled. Print a warning in this case, because seeking
outside the cache (which we can't prevent since the demuxer is not aware
of this problem) still messes everything up.
Pointless, using stream->start_pos/end_pos instead.
demux_mf was the only place where this was used specially, but we can
rely on timestamps instead for this case.
Dudemanguy
Guido Cella
Jan Ekström
sfan5
Paul B Mahol
Avi Halachmi (:avih)
wm4
Dmitrij D. Czarkoff
Marcin Kurczewski