The angles should be set and queried only if a valid title is
selected. Also, in navigation mode, there are some limitations
which make it impossible to query current title/angle.
This commit introduces new stream protocols: bdnav(and others).
bdnav stream shares lots of codes with original bluray stream, so
it's not separated in different source file.
Major difference from bluray is that bdnav does not support longest
title because there is no way to query that information.
bdnav://menu and bdnav://first correspond to top menu title and
first play title respectively, though they often point same title.
Also, binary position based seeking has been removed, because it
didn't have no point.
This was actually supposed to be removed with pull reuqest #671, but
I accidentally re-added it with a rebasing mistake.
This probably also coincidentally fixes compilation with older
libbluray (issue #672).
Use bd_get_playlist_info() instead of bd_get_title_info(). The
previous implementation couldn't query current playlist and this
made it impossible to call bd_get_playlist_info() which is more
desirable than bd_get_title_info() because, for Blu-rays, playlist
is the unit of playback not title. This commit fixes that.
The cost of calling bd_get_title_info() is quite expensive and
requires lots of CPU usage. Using BD_EVENT_PLAYLIST and
BD_EVENT_TITLE, it's possible to cache BLURAY_TITLE_INFO object for
current title and BD_EVENT_ANGLE handler caches current angle. In
my test case, with this commit, CPU usage can be saved about 15-20%.
demux_mf.c explicitly checks for the stream type to check whether images
are opened via pattern (mf://..., i.e. stream_mf.c) or directly. Of
course the stream type is not set to STREAMTYPE_MF if the stream is
wrapped through the cache, so it tried to open the pattern directly as
file, which failed.
Fix this by disabling caching for mf://. The cache doesn't make sense
here anyway, because each file is opened and closed every frame (perhaps
to avoid memory bloat).
This cd_info_t struct was practically unused. The only thing it did was
storing the track name of the form "Track %d" in a very roundabout way.
Remove it. (It made more sense when there was still CDDB support.)
Don't use an integer division to get the time, since that would round on
second boundaries. Also round up the time by sector size. Seeking rounds
down due to alignment constraints, but if we round up the time, we can
make it land on the exact destination sector.
This fixes that the track change code printed the previous track when
seeking by chapter.
dvdnav.c did not handle event in regular sequence. Usually this
does not make any trouble except around MP_NAV_EVENT_RESET_ALL.
Those events should be handled in regular sequence. If they're
mixed, it can make wrong result.
For instance, MP_NAV_EVENT_HIGHLIGHT right after
MP_NAV_EVENT_RESET_ALL should not be ignored but it might be
because MP_NAV_EVENT_RESET_ALL makes the demuxer reloaded and osd
hidden.
Stream-level chapters (like DVD etc.) did potentially not have
timestamps for each chapter, so STREAM_CTRL_SEEK_TO_CHAPTER and
STREAM_CTRL_GET_CURRENT_CHAPTER were needed to navigate chapters. We've
switched everything to use timestamps and that seems to work, so we can
simplify the code and remove this old mechanism.
Report the time for each chapter (tracks are treated as chapters). This
allows us to get rid of the "old" chapter mechanism, and also behaves
better with the frontend.
This makes assumptions about the audio formats, but that format is
hardcoded anyway in the rawaudio demuxer defaults (and always was).
The title for stream_bluray DID start from 1 and I misunderstood
that it started from 0 because mpv accepted bd://0 as a proper
argument. In fact, 0 title was an alias for the longest title but
it was not handled as a special value. This commit fixes these
behavious. 'disc-title' property for Blu-ray now starts from 0 and
the default title can be specified by 'longest' title just like
stream_dvdnav: bd://longest. Of course, 'longest' can be omitted.
This commit makes 'disc-title' property writable using
STREAM_CTRL_SET_CURRENT_TITLE. This commit also contains
implementation of STREAM_CTRL_SET_CURRENT_TITLE for stream_bluray.
Currently, 'disc-title' is writable only for stream_dvdnav and
stream_bluray and stream_dvd is not supported.
This commit makes 'disc-title' properties for DVDs start from 0.
There was an inconsistency around 'disc-title' property between
DVDs (from 1) and Blu-rays (from 0). This fixes#648.
Signed-off-by: wm4 <wm4@nowhere>
This commit provides impelmentation of STREAM_CTRL_GET_NUM_TITLES
for dvdnav stream. Other streams for DVD or Blu-ray are already
provide STREAM_CTRL_GET_NUM_TITLES.
Detected 'protocols' are AFP, nfs, smb and webdav. This can be extended on
request.
This is currently only implemented for BSD systems (using fstatfs). This
addresses issue #558 on the above platforms.
Note that this still happens in the stream level, so we can't have
nice highlevel behavior restricting seeking. Instead, if a seek leads
to the demuxer requesting data outside of the cached range, the seek
will simply fail. This might confuse the demuxer, and the resulting
behavior is not necessarily useful.
Note that this also doesn't try to skip data on a forward seek. This
would just freeze the stream with slow unseekable streams.
One nice thing is that stream.h has a separate function for merely
skipping data (separate from seeking forward), which is pretty useful
in this case: we want skipping of data to work, even if we reject
seeking forward by skipping data as too expensive. This probably is
or will be useful for demux_mkv.c.
This is probably ok. Probing could hit this case very often, since it'll
mean running this function on potentially binary data, but on the other
hand, probing usually uses a memory stream (to limit the amount of data
read), and memory streams have s->log silenced (details see
open_memory_stream()).
This simplifies the implementation and should make it more robust. For
example, we return an error if a line is longer than the provided buffer
(instead of splitting the line).
The code is much shorter, because now finding the new line and reading
characters is done in one go.
Doesn't affect the generated code, but avoids confusion
in both humans and newer Coverity versions.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@36623 b3059339-0415-0410-9bf9-f77b7e298cf2
The struct we need to copy is actually a cdrom_msf0, not cdrom_msf.
Even though the kernel for no good reason reads it in as a
cdrom_msf struct, but only uses the part shared with cdrom_msf0 -
this is probably a kernel bug.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@36622 b3059339-0415-0410-9bf9-f77b7e298cf2
Starting a network stream could stall by executing uncacheable stream
control requests (STREAM_CTRL_GET_LANG and STREAM_CTRL_GET_DVD_INFO).
Being uncacheable means the player has to wait until the cache is done
reading the current block of data. These requests can't be cached
because they're too complicated, so the only way to avoid them is
special casing the DVD and Bluray streams (which are the only things
which need these requests), and not doing them in other cases.
(This is kind of inelegant, but so is the rest of the DVD/BD code.)
This fixes two things:
1. Dropping files on the VO window will auto-load subtitles (since most
drag & drop code prefixes the filenames with 'file://', and the
subtitle auto-load code considers 'file://' non-local)
2. Fix behavior of the %x screenshot filename template (similar problem)
One could force all that code to special-case 'file://' URLs, but just
replacing the filename on playback start is simpler.
Streams like CDDA have special requirements in what quantities data can
be read: you can only read a sector at once, not more and not less. The
stream_peek() function didn't respect that and set less (used internal
buffer size of 2048 bytes, instead of CD sector size of 2352 bytes), so
no data was read and EOF was accidentally set, making playback with
cdda:// fail.
This is a regression since commit 9a723f, but that commit merely exposed
the issue (the redundant seek would clear the EOF flag).
There's a single mp_msg() in path.c, but all path lookup functions seem
to depend on it, so we get a rat-tail of stuff we have to change. This
is probably a good thing though, because we can have the path lookup
functions also access options, so we could allow overriding the default
config path, or ignore the MPV_HOME environment variable, and such
things.
Also take the chance to consistently add talloc_ctx parameters to the
path lookup functions.
Also, this change causes a big mess on configfiles.c. It's the same
issue: everything suddenly needs a (different) context argument. Make it
less wild by providing a mp_load_auto_profiles() function, which
isolates most of it to configfiles.c.
The TV code pretends to be part of stream/, but it's actually demuxer
code too. The audio_in code is shared between the TV code and
stream_radio.c, so stream_radio.c needs a small hack until stream.c is
converted.
Always pass around mp_log contexts in the option parser code. This of
course affects all users of this API as well.
In stream.c, pass a mp_null_log, because we can't do it properly yet.
This will be fixed later.
In my opinion, config.h inclusions should be kept to a minimum. MPlayer
code really liked including config.h everywhere, though, even in often
used header files. Try to reduce this.
Since m_option.h and options.h are extremely often included, a lot of
files have to be changed.
Moving path.c/h to options/ is a bit questionable, but since this is
mainly about access to config files (which are also handled in
options/), it's probably ok.
The tmsg stuff was for the internal gettext() based translation system,
which nobody ever attempted to use and thus was removed. mp_gtext() and
set_osd_tmsg() were also for this.
mp_dbg was once enabled in debug mode only, but since we have log level
for enabling debug messages, it seems utterly useless.
Before this, they were displayed forever. Since some dvd screens seem
not to allow escaping from the still frame using the menu, this could
get you stuck forever.
On dvdnav, caching kind of works but not really. (Not our fault, at
least not fully. It's due to libdvdnav being slightly misdesigned; see
previous commit for some explanations.)
The TV code is implemented in the demuxer, and the stream implementation
is just a wrapper, so caching makes no sense here.
No idea why this was disabled. It was in the original MPlayer code,
which doesn't make much sense to me, because using the MPlayer stream
cache seems 100% broken due to design issues.
EOF is a special case. Normally, the reader will block until the cache
thread has new data. Obviously we don't want to do this on EOF, because
we'd potentially block forever. On the other hand, EOF will put the
cache thread into a waiting state, so if EOF recovers, this will happen
at a "later" point. This is bad if there is some kind of external event
that ends the EOF condition. In this case, a steram_read() call would
still return EOF. Make it so that the reader waits at least for one
iteration of the cache trying to rad a new block.
Also adjust some debug messages to not print file positions in hex.
There was already something similar in the code that did the actual
seek, but I think seeking to the same position could still trigger an
actual seek due to weid interaction with the buffer.
This readds a more or less completely new dvdnav implementation, though
it's based on the code from before commit 41fbcee. Note that this is
rather basic, and might be broken or not quite usable in many cases.
Most importantly, navigation highlights are not correctly implemented.
This would require changes in the FFmpeg dvdsub decoder (to apply a
different internal CLUT), so supporting it is not really possible right
now. And in fact, I don't think I ever want to support it, because it's
a very small gain for a lot of work. Instead, mpv will display fake
highlights, which are an approximate bounding box around the real
highlights.
Some things like mouse input or switching audio/subtitles stream using
the dvdnav VM are not supported.
Might be quite fragile on transitions: if dvdnav initiates a transition,
and doesn't give us enough mpeg data to initialize video playback, the
player will just quit.
This is added only because some users seem to want it. I don't intend to
make mpv a good DVD player, so the very basic minimum will have to do.
How about you just convert your DVD to proper video files?
Uncompressed rar archives can be transparently opened, but the filename
the player doesn't have the direct filename (but something starting
with rar://... instead). This will lead to external subtitles not
being loaded.
This doesn't handle multi-volume rar files, but in that cases just use
the --autosub-match=fuzzy option.
Fixes#397 on github.
This is needed so that new processes (created with fork+exec) don't
inherit open files, which can be important for a number of reasons.
Since O_CLOEXEC is relatively new (POSIX.1-2008, before that Linux
specific), we #define it to 0 in io.h to prevent compilation errors on
older/crappy systems. At least this is the plan.
input.c creates a pipe. For that, add a mp_set_cloexec() function (which
is based on Weston's code in vo_wayland.c, but more correct). We could
use pipe2() instead, but that is Linux specific. Technically, we have a
race condition, but it won't matter.
pthreads should be available anywhere. Even if not, for environment
without threads a pthread wrapper could be provided that can't actually
start threads, thus disabling features that require threads.
Make pthreads mandatory in order to simplify build dependencies and to
reduce ifdeffery. (Admittedly, there wasn't much complexity, but maybe
we will use pthreads more in the future, and then it'd become a real
bother.)
This used to be needed to access the generic stream header from the
specific headers, which in turn was needed because the decoders had
access only to the specific headers. This is not the case anymore, so
this can finally be removed again.
Also move the "format" field from the specific headers to sh_stream.
The priv struct is now allocated by talloc in stream.c. It doesn't need
to be manually freed, and using free() instead of talloc_free() probably
crashes.
Slightly simplifies memory management. This might make adding a demuxer
cache wrapper easier at a later point, because you can just copy the
complete stream header, without worrying that the wrapper will free the
individual stream header fields.
This used to be needed for teletext support. Teletext commit has been
removed (see commit ebaaa41f), and it appears this code is inactive.
It was just forgotten with the removal. Get rid of it completely.
Untested. (Like all changes to the TV code.)
Signed-off-by: wm4 <wm4@nowhere>
Significant modifications over the original patch by not overriding
syscalls with macros ("#define open v4l2open") for fallback, but the
other way around ("#define v4l2open open"). As consequence, the calls
have to be replaced throughout the file.
Untested, although the original patch probably was tested.
Apparently this is not portable to FreeBSD. It turns out that we
(probably) don't use any symbols defined by this header directly, so
the includes are not needed.
This member was redundant. sh_audio->sample_format indicates the sample
size already.
The TV code is a bit strange: the redundant sample size was part of the
internal TV interface. Assume it's really redundant and not something
else. The PCM decoder ignores the sample size anyway.
The configure followed 5 different convetions of defines because the next guy
always wanted to introduce a new better way to uniform it[1]. For an
hypothetic feature 'hurr' you could have had:
* #define HAVE_HURR 1 / #undef HAVE_DURR
* #define HAVE_HURR / #undef HAVE_DURR
* #define CONFIG_HURR 1 / #undef CONFIG_DURR
* #define HAVE_HURR 1 / #define HAVE_DURR 0
* #define CONFIG_HURR 1 / #define CONFIG_DURR 0
All is now uniform and uses:
* #define HAVE_HURR 1
* #define HAVE_DURR 0
We like definining to 0 as opposed to `undef` bcause it can help spot typos
and is very helpful when doing big reorganizations in the code.
[1]: http://xkcd.com/927/ related
Never check s->seek (except in init), because it'd have to check
s->flags anyway. Also, for fast skippable streams (like pipes), don't
set the bit that indicates support for seek forward.
Make sure s->end_pos is always 0 for unseekable streams. Lots of code
outside of stream.c uses this to check seeking support.
This one really did bite me hard (see previous commit), so enable it by
default.
Fix some cases of shadowing throughout the codebase. None of these
change behavior, and all of these were correct code, and just tripped up
the warning.
It's true that ALSA uses alloca() in some of its API functions, but
since this is hidden behind macros in the ALSA headers, we have no
reason to include alloca.h ourselves.
Might help with portability (FreeBSD).
Now that talloc has been removed, the license can be switched back to
GPLv2+. Actually, there never was a GPLv2+ licensed MPlayer (fork or
not) until now, but removal of some GPLv2-only code makes this possible
now. Rewrite the Copyright file to explain the reasons for the licenses
MPlayer and forks use. The old Copyright file didn't contain anything
interesting anymore, and all information it contained is available at
other places in the source tree.
The reason for the license change itself is that it should improve
interoperability with differently licensed code in general.
This essentially reverts commit 1752808.
The problem with DVD/BD and playback resume is that most often, the
filename is just "dvd://", while the actual path to the DVD disk image
is given with --dvd-device. But playback resume works on the filename
only.
Add a pretty bad hack that includes the path to the disk image if the
filename starts with dvd://, and the same for BD respectively. (It's a
bad hack, but I want to go to bed, so here we go. I might revert or
improve it later, depending on user feedback.)
We have to cleanup the global variable mess around the dvd_device.
Ideally, this should go into MPOpts, but it isn't yet. Make the code
paths in mplayer.c take MPOpts anyway.
By default, libavformat uses UDP for rtsp playback. This doesn't work
very well. Apparently the reason is that the buffer sizes libavformat
chooses for UDP are way too small, and switching to TCP gets rid of this
issue entirely (thanks go to Reimar Döffinger for figuring this out).
In theory, you can set buffer sizes as libavformat options, but that
doesn't seem to help.
Add an option to select the rtsp transport, and make TCP the default.
Also remove an outdated comment from stream.c.
Mainly for debugging. Usually, we just set options for all possible
protocols, and we can't really know whether a certain protocol is used
beforehand. That's also the reason why avio_open2() takes a dictionary,
instead of letting the user set options directly with av_opt_set(). Or
in other words, we don't know whether an option that could be set is an
error or not, thus we print the messages only at verbose level.
I have a sample where some final chapters are missing. This was causing a
segmentation fault when trying to fetch chapter times for them.
This makes the code ignore those chapters.
MPlayer handles this correctly, because MPlayer still has the FourCC
codec dispatch (codecs.conf). We need to handle this case specially,
because the libavformat rawvideo decoder will of course not eat mjpeg.
mjpeg is the only supported format, though. (Even MPlayer needs to
convert between V4L2 formats and MPlayer FourCCs, and mjpeg is the only
non-raw format.)
Until now, stream_peek() read only the bare minimum it had to read from
the stream. But this could cause problems, such as being very
inefficient when peeking a lot, or conflicting with ability to seek
back. (The latter issue can be caused by peeking a few bytes, and then
doing a stream_read() with a size that is 1 byte longer: this would read
the peeked data, then call stream_fill_buffer(), which throws away the
previously peeked bytes - so you can't seek back anymore. This is
mitigated by a hack in demux_open(): it peeks a full buffer, to avoid
that peeking/reading during demuxer probing [or before that, in a stream
filter] can cause the buffer to be dropped.)
Apparently, it is popular to store large files in uncompressed rar
archives. Extracting files is not practical, and some media players
suport playing directly from uncompressed rar (at least VLC and some
DirectShow components).
Storing or accessing files this way is completely idiotic, but it is
a common practice, and the ones subjected to this practice can't do
much to change this (at least that's what I assume/hope). Also, it's
a feature request, so we say yes.
This code is mostly taken from VLC (commit f6e7240 from their git tree).
We also copy the way this is done: opening a rar file by itself yields
a playlist, which contains URLs to the actual entries in the rar file.
Compressed entries are simply skipped.
Add a stream filter concept, in which streams can be opened on top of
an underlying "source" stream. Change the open code to make this
easier, and also to account for some mechanisms that will be needed
for this.
The following commit will add stream_rar, which contains such a stream
filter.
This is really not needed. While we really can't take a loaded buffer
over to the cache, there's no reason why the cache couldn't read this
buffer normally.
On the other hand, this code could cause trouble when probing from a
stream before the cache has been enabled.
The way the url_options field was handled was not entirely sane: it's
actually a flexible array member, so it points to garbage for streams
which do not initialize this member (it just points to the data right
after the struct, which is garbage in theory and practice). This was
not actually a problem, since the field is only used if priv_size is
set (due to how this stuff is used). But it doesn't allow setting
priv_size only, which might be useful in some cases.
Also, make the protocols array not a fixed size array. Most stream
implementations have only 1 protocol prefix, but stream_lavf.c has
over 10 (whitelists ffmpeg protocols). The high size of the fixed
size protocol array wastes space, and it is _still_ annoying to
add new prefixes to stream_lavf (have to bump the maximum length),
so make it arbitrary length.
The two changes (plus some more cosmetic changes) arte conflated into
one, because it was annoying going over all the stream implementations.
Modeled after the old playlist_parser.c, but actually new code, and it
works a bit differently.
Demuxers (and sometimes streams) are the component that should be used
to open files and to determine the file format. This was already done
for subtitles, but playlists still use a separate code path.
Instead of always skipping in STREAM_BUFFER_SIZE blocks, allow an
arbitrary size. This allows - in theory - faster forward seeking in
pipes.
(Maybe not a very significant change, but it reduces the number of
things that depend on STREAM_BUFFER_SIZE for no good reason. Though
we still use that value as minimum read size.)
stream_file.c contains some code meant for forward seeking with pipes.
This simply reads data until the seek position is reached. Move this
code to stream.c. This stops stream_file from doing strange things
(messing with stream internals), and removes the code duplication too.
We also make stream_seek_long() use the new skip code. This is shorter
and much easier to follow than the old code, which basically did strange
things.
Using the radio set/step channel commands would have crashed (that was
broken for about a year, nobody ever noticed). The "capture" part of
a radio:// URI was incorrectly passed (this was broken quite recently).
Still couldn't test it fully. I have no radio device. I suspect nobody
uses this feature or will ever use it again.
So for example "file:///file%20name.mkv" will open "file name.mkv".
I'm not sure whether we want/need this. The old code didn't do it.
Also, it's not really clear whether this is handled correctly. It
seems the corresponding freedesktop.org "standard" allows a (useless)
hostname part, which we should skip in theory. The number of slashes
is not really clear either. We can open relative filenames (by removing
one of the slashes from the example above), which is perhaps an
unneeded feature. How does this even work with Windows paths?
This issues can probably be corrected later.
The URL unescape code is based on code from m_option.c removed with
a recent commit.
Move the URL parsing code from m_option.c to stream.c, and simplify it
dramatically. This code originates from times when http code used this,
but now it's just relict from other stream implementations reusing this
code. Remove the unused bits and simplify the rest.
stream_vcd is insane, and the priv struct is different on every
platform, so drop the URL parsing. This means you can't specify a track
anymore, only the device. (Does anyone use stream_vcd? Not like this
couldn't be fixed, but it doesn't seem worth the effort, especially
because it'd require potentially touching platform specific code.)
The URL option parser only accesses certain fields. Remove the fields
that are not accessed, and thus are completely unused and inaccessible.
Historically, these fields were supposed to be settable using an extra
list of options passed to open_stream(). Commit f518cf7 removed these
extra options. Apparently nothing ever actually used this facility.
In general, this warning can hint to actual bugs. We don't enable it
yet, because it would conflict with some unmerged code, and we should
check with clang too (this commit was done by testing with gcc).
These were printed only with -v. Most streams had them set to useless
or redundant values, so it's just badly maintained bloat.
Since we remove the "author" field too, and since this may have
copyright implications, we add the contents of the author fields to
the file headers, except if the name is already part of the file header.
Stream implementations could set this to a unix file descriptor. The
generic stream code could use it as fallback for a few things. This
was confusing and insane. In most cases, the stream implementations
defined all callbacks, so setting the fd member didn't have any
advantages, other than avoiding defining a private struct to store it.
It appears that even if the stream implementation used close() on the
fd (or something equivalent), stream.c would close() it a second time
(and on windows, even would call closesocket()), which should be proof
for the insanity of this code.
For stream_file.c, additionally make sure we don't close stdin or
stdout if "-" is used as filename.
For stream_vcd.c, remove the control() code. This code most likely
didn't make the slightest sense, because it used a different type
for stream->priv. It also leaked memory. Maybe it worked, but it's
incorrect and insignificant anyway, so kill it. This code was added
with commit 9521c19 (svn commit 31019).
Untested for all protocols other than stream_file.c.
Get rid of the strange and messy reliance on DEMUXER_TYPE_ constants.
Instead of having two open functions for the demuxer callbacks (which
somehow are both optional, but you can also decide to implement both...),
just have one function. This function takes a parameter that tells the
demuxer how strictly it should check for the file headers. This is a
nice simplification and allows more flexibility.
Remove the file extension code. This literally did nothing (anymore).
Change demux_lavf so that we check our other builtin demuxers first
before libavformat tries to guess by file extension.
This removes the dependency on DEMUXER_TYPE_* and the file_format
parameter from the stream open functions.
Remove some of the playlist handling code. It looks like this was
needed only for loading linked mov files with demux_mov (which was
removed long ago).
Delete a minor bit of dead network-related code from stream.c as well.
Generally remove all accesses to demux_stream from all the code, except
inside of demux.c. Make it completely private to demux.c.
This simplifies the code because it removes an extra concept. In demux.c
it is reduced to a simple packet queue. There were other uses of
demux_stream, but they were removed or are removed with this commit.
Remove the extra "ds" argument to demux fill_buffer callback. It was
used by demux_avi and the TV pseudo-demuxer only.
Remove usage of d_video->last_pts from the no-correct-pts code. This
field contains the last PTS retrieved after a packet that is not NOPTS.
We can easily get this value manually because we read the packets
ourselves. Reuse sh_video->last_pts to store the packet PTS values. It
was used only by the correct-pts code before, and like d_video->last_pts,
it is reset on seek. The behavior should be exactly the same.
Currently, all demuxer fill_buffer functions have a demux_stream
parameter. We want to remove that, but the TV code still depends on
it. Add a hack to remove that dependency.
The problem with the TV code is that reading video and audio frames
blocks, so in order to avoid a deadlock, you should read either of
them only if the decoder actually requests new data.
This is not directly related to the handling of format changes itself,
but playing audio normally after the change. This was broken: the output
byte rate was not recalculated, so audio-video sync was simply broken.
Fix this by calculating the byte rate on the fly, instead of storing it
in sh_audio.
Format changes are relatively common (switches between stereo and 5.1
in TV recordings), so this fixes a somewhat critical bug.
Add this option, which lets users set the cache size without forcing it
even when playing from the local filesystem.
Also document the default value explicitly.
The Matroska linked segments case is slightly simplified: they can
never come from network (mostly because it'd be insane, and we can't
even list files from network sources), so the cache will never be
enabled automatically.
This is a regression caused by 854303a. This commit removed the include of
`sys/time.h` which was included in `cache.c` through a chain of recurvive
includes.
These separate arrays were used by the old demuxers and are not needed
anymore. We can simplify track switching as well.
One interesting thing is that stream/tv.c (which is a demuxer) won't
respect --no-audio anymore. It will probably work as expected, but it
will still open an audio device etc. - this is because track selection
is now always done with the runtime track switching mechanism. Maybe
the TV code could be updated to do proper runtime switching, but I
can't test this stuff.
Delete demux_avi, demux_asf, demux_mpg, demux_ts. libavformat does
better than them (except in rare corner cases), and the demuxers have
a bad influence on the rest of the code. Often they don't output
proper packets, and require additional audio and video parsing. Most
work only in --no-correct-pts mode.
Remove them to facilitate further cleanups.
Commit 7b16d4b changed some stream implementations to check the buffer
size passed to them. This made stream_cdda stop working, because the
default buffer size is smaller than the CDIO frame size. So pass the
sector size instead of the (arbitrary) default buffer size.
Seeking to position 0 meant to try reconnecting with some streams,
actually just the internal http implementation. This has been removed,
so we don't need the special handling anymore.
This means we don't have to be stuck in a retry loop if the stream
doesn't even support reconnect.
stream_vstream.c in particular was actually dependent on the network
code, and didn't compile anymore.
Cleanup the protocol list in mpv.rst, and add some missing ones
supported by libavformat to stream_lavf.c.
This was an old leftover from an earlier cleanup (which happened in
2003), and which used "special" stuff for streams that could be only
forward-seeked.
Also, don't add mode flags to s->flags; they're supposed to be in
s->mode instead.
This was under CONFIG_NETWORKING, so in theory it should have been save
to remove. But actually this disables forward skipping when reading
from a pipe. (Still a questionable feature, because it doesn't behave
well with libavformat - but it was not supposed to be changed.)
This commit removes the "old" networking code in favor of libavformat's
code.
The code was still used for mp_http, udp, ftp, cddb. http has been
mapped to libavformat's http support since approximately 6 months ago.
udp and ftp have support in ffmpeg (though ftp was added only last
month). cddb support is removed with this commit - it's probably not
important and rarely used if at all, so we don't care about it.
When reading something successfully, the eof flag should never be 1, so
clear it in these situations. The eof flag will be set properly on the
next read call.
STREAM_CTRL_GET_METADATA will be used to poll for streamcast metadata.
Also add DEMUXER_CTRL_UPDATE_INFO, which could in theory be used by
demux_lavf.c. (Unfortunately, libavformat is too crappy to read metadata
mid-stream for mp3 or ogg, so we don't implement it.)
stream_read_unbuffered() can sometimes return negative values on error.
Change that to return 0 - the negative values are nowhere used anyway.
If distinguishing errors and EOF is really needed, a flag could be added
instead.
This also fixes the stream_read_partial() call in cache.c, which assumes
the return values is always >= 0.
Querying this caused the cache to block and wait. Some parts of the
frontend (like progress bar) call this very often, so cache performance
was ruined in these cases.
Also print a message in -v mode when the cache is blocked for a
STREAM_CTRL. This should make debugging similar issues easier.
Seems like a completely unnecessary complication. Instead, always add a
1 byte padding (could be extended if a caller needs it), and clear it.
Also add some documentation. There was some, but it was outdated and
incomplete.
Or rather, keep hacking it until it somehow works. The problem here was
that trying to avoid calling STREAM_CTRL_GET_CURRENT_TIME too often
didn't really work, so the cache sometimes returned incorrect times.
Also try to avoid the situation that looking up the time with an
advanced read position doesn't really work, as well as when trying to
look it up when EOF or cache end has been reached. In that case we have
read_filepos == max_filepos, which is "outside" of the cache, but
querying the time is still valid.
Should also fix the issue that demuxing streams with demux_lavf and if
STREAM_CTRL_GET_CURRENT_TIME is not supported messed up the reported
playback position.
This stuff is still not sane, but the way the player tries to fix the
playback time and how the DVD/BD stream inputs return the current time
based on the current byte position isn't sane to begin with. So, let's
leave it at bad hacks.
The two changes that touch s->eof are unrelated and basically of
cosmetic nature (separate commit would be too noisy.)
This is useless on the cache side. The sector is needed only to deal
with stream implementations which are not byte addressable, and the
cache is always byte addressable.
Also set a default read_chunk value. (This value is never used unless
you chain multiple caches, but it's cleaner.)
DVD and bluray packet streams carry (essentially) random timestamps,
which don't start at 0, can wrap, etc. libdvdread and libbluray provide
a linear timestamp additionally. This timestamp can be retrieved with
STREAM_CTRL_GET_CURRENT_TIME.
The problem is that this timestamp is bound to the current raw file
position, and the stream cache can be ahead of playback by an arbitrary
amount. This is a big problem for the user, because the displayed
playback time and actual time don't match (depending on cache size),
and relative seeking is broken completely.
Attempt to fix this by saving the linear timestamp all N bytes (where
N = BYTE_META_CHUNK_SIZE = 16 KB). This is a rather crappy hack, but
also very effective.
A proper solution would probably try to offset the playback time with
the packet PTS, but that would require at least knowing how the PTS can
wrap (e.g. how many bits is the PTS comprised of, and what are the
maximum and reset values). Another solution would be putting the cache
between libdvdread and the filesystem/DVD device, but that can't be done
currently. (Also isn't that the operating system's responsibility?)
This was probably done this way to ensure that after a successful seek,
the reported stream position is the same as the requested seek position.
But it doesn't make too much sense, since both stream->pos and the
stream implementation's internal position will go out of sync.
The stream EOF flag should only be set when trying to read past the end
of the file (relatively similar to unix files). Always clear the EOF
flag on seeking. Trying to set it "properly" (depending whether data is
available at seek destination or not) might be an ok idea, but would
require attention to too many special cases. I suspect before this
commit (and in MPlayer etc. too), the EOF flag wasn't handled
consistently when the stream position was at the end of the file.
Fix one special case in ebml.c and stream_skip(): this function couldn't
distinguish between at-EOF and past-EOF either.
EOF should be set when reading more data fails. The stream
implementations have nothing to say here and should behave correctly
when trying to read when EOF was actually read.
Even when seeking, a correct EOF flag should be guaranteed. stream_seek()
(or actually stream_seek_long()) calls stream_fill_buffer() at least
once, which also updates the EOF flag.
This function was called in various places. Most time, it was used
before a seek. In other cases, the purpose was apparently resetting
the EOF flag. As far as I can see, this makes no sense anymore. At
least the stream_reset() calls paired with stream_seek() are completely
pointless. A seek will either seek inside the buffer (and reset the
EOF flag), or do an actual seek and reset all state.
This happens with something like "mpv https://www.youtube.com/watch".
The URL is obviously not valid, but the stream layer tries to reconnect.
This commit at least allows to use the terminal to abort gracefully.
(Other than killing the process.)
Basically rewrite all the code supporting the cache (i.e. anything other
than the ringbuffer logic). The underlying design is untouched.
Note that the old cache2.c (on which this code is based) already had a
threading implementation. This was mostly unused on Linux, and had some
problems, such as using shared volatile variables for communication and
uninterruptible timeouts, instead of using locks for synchronization.
This commit does use proper locking, while still retaining the way the
old cache worked. It's basically a big refactor.
Simplify the code too. Since we don't need to copy stream ctrl args
anymore (we're always guaranteed a shared address space now), lots of
annoying code just goes away. Likewise, we don't need to care about
sector sizes. The cache uses the high-level stream API to read from
other streams, and sector sizes are handled transparently.
demux_lavf probes up to 2 MB of data in the worst case. When the ffmpeg
demuxer is actually opened, the stream is seeked back to 0, and the
previously read data is thrown away.
This wasn't a problem for playback of local files, but it's less than
ideal for playing from slow media (like web streams), and breaks
completely if the media is not seekable (pipes, some web streams).
This new function is intended to allow fixing this. demux_lavf will use
it to put the read probe data back into the buffer.
The simplest way of implementing this function is by making it
transparently extend the normal stream buffer. This makes sure no
existing code is broken by new weird special cases. For simplicity
and to avoid possible performance loss due to extra dereferencing
when accessing the buffer, we just extend the static buffer from
8 KB to 2 MB. Normally, most of these 2 MB will stay uncommitted, so
there's no associated waste of memory. If demux_lavf really reads all
2 MB, the memory will be committed and stay unused, though.
Before this commit, the cache was franken-hacked on top of the stream
API. You had to use special functions (like cache_stream_fill_buffer()
instead of stream_fill_buffer()), which would access the stream in a
cached manner.
The whole idea about the previous design was that the cache runs in a
thread or in a forked process, while the cache awa functions made sure
the stream instance looked consistent to the user. If you used the
normal functions instead of the special ones while the cache was
running, you were out of luck.
Make it a bit more reasonable by turning the cache into a stream on its
own. This makes it behave exactly like a normal stream. The stream
callbacks call into the original (uncached) stream to do work. No
special cache functions or redirections are needed. The only different
thing about cache streams is that they are created by special functions,
instead of being part of the auto_open_streams[] array.
To make things simpler, remove the threading implementation, which was
messed into the code. The threading code could perhaps be kept, but I
don't really want to have to worry about this special case. A proper
threaded implementation will be added later.
Remove the cache enabling code from stream_radio.c. Since enabling the
cache involves replacing the old stream with a new one, the code as-is
can't be kept. It would be easily possible to enable the cache by
requesting a cache size (which is also much simpler). But nobody uses
stream_radio.c and I can't even test this thing, and the cache is
probably not really important for it either.
These assumed that the buffer provided with fill_buffer() was at least
sector sized, instead of checking the size parameter.
This is just a cleanup, since every caller made sure to align everything
on sector sizes, if a stream has the sector size set.
Of course all of stream_dvd.c (as well as libdvdread) is completely
insane, but at least this hack for ancient broken compilers on really
obscure platforms should be safe to remove.
Some code in mplayer.c did stuff like accessing (dvd_priv_t *)st->priv.
Do this indirectly by introducing STREAM_CTRL_GET_DVD_INFO. This is
extremely specific to DVD, so it's not worth abstracting this further.
This is a preparation for turning the cache into an actual stream, which
simply wraps the cached stream. There are other streams which are
accessed in the way DVD was, at least TV/radio/DVB. We assume these
can't be used with the cache. The code doesn't look thread-safe or fork
aware.
Internally, stream_dvd.c returned DEMUXER_TYPE_MPEG_PS, and the same
value was hardcoded to enforced usage of demux_lavf in demux.c. But
"-demuxer mpegps" basically did the same, so that switch was broken
for this format. Undo this and don't request a demuxer in stream_dvd.c.
demux_lavf.c is (probably) good enough to probe correctly with DVD.
Otherwise, we'd actually have to do something completely different to
force the libavformat demuxer.
Tests with demux_mkv show that the speed doesn't change (or actually,
it seems to be faster after this change). In any case, there is not
the slightest reason why these should be inline. Functions for which
this will (probably) actually matter, like stream_read_char, are
still left inline.
This was tested with demux_mkv's indexing. For broken files without
index, demux_mkv creates an on-the-fly index. If you seek to a later
part of the file, all data has to be read and parsed until the wanted
position is found. This means demux_mkv will do mostly I/O, calling
stream_read_char() and stream_read(). This should be the most I/O
intensive non-deprecated part of mpv that uses the stream interface.
(demux_lavf has its own buffering.)
GetTimer() is generally replaced with mp_time_us(). Both calls return
microseconds, but the latter uses int64_t, us defined to never wrap,
and never returns 0 or negative values.
GetTimerMS() has no direct replacement. Instead the other functions are
used.
For some code, switch to mp_time_sec(), which returns the time as double
float value in seconds. The returned time is offset to program start
time, so there is enough precision left to deliver microsecond
resolution for at least 100 years. Unless it's casted to a float
(or the CPU reduces precision), which is why we still use mp_time_us()
out of paranoia in places where precision is clearly needed.
Always switch to the correct time. The whole point of the new timer
calls is that they don't wrap, and storing microseconds in unsigned int
variables would negate this.
In some cases, remove wrap-around handling for time values.
This helps passing the channel layout correctly from decoder to audio
filter chain. (Because that part "reuses" the demuxer level codec
parameters, which is very disgusting.)
Note that ffmpeg stuff already passed the channel layout via
mp_copy_lav_codec_headers(). So other than easier dealing with the
demuxer/decoder parameters mess, there's no real advantage to doing
this.
Make the --channels option accept a channel map. Since simple numbers
map to standard layouts with the given number of channels, this is
downwards compatible. Likewise for demux_rawaudio.
Uses the same mechanisms as stream_dvd to report the virtual playback
time as known by libdvdread/libbluray, instead of the raw demuxer
output.
This should solve many problems with BD playback, like correct display
of playback time and duration.
On the other hand, this causes some new problems. For example, the
reported stream time has a rather low resolution (1-2 seconds), so
doing precise seeking on it is near impossible.
Allow the stream layer to report chapter times. Extend stream_dvd to do
this. I'm not 100% sure whether the re-used code is bug-free (because it
was used for slave-mode and/or debugging only).
MAke the frontend do time-based seeks when switching DVD chapters. I'm
not sure if there's a real reason STREAM_CTRL_SEEK_TO_CHAPTER exists
(maybe/hopefully not), but we will see.
Note that querying chapter times in demuxer_chapter_time() with the new
STREAM_CTRL_GET_CHAPTER_TIME could be excessively slow, especially with
the cache enabled. The frontend likes to query chapter times very often.
Additionally, stream_dvd uses some sort of quadratic algorithm to list
times for all chapters. For this reason, we try to query all chapters on
start (after the demuxer is opened), and add the chapters to the demuxer
chapter list. demuxer_chapter_time() will get the time from that list,
instead of asking the stream layer over and over again.
This assumes stream_dvd knows the list of chapters at the start, and
also that the list of chapters never changes during playback. This
seems to be true, and the only exception, switching DVD titles, is not
supported at runtime (and doesn't need to be supported).
These were found by the cppcheck and scan-build static analyzers. Most
of these aren't interesting (the 2 previous commits fix some interesting
cases found by these analyzers), and they don't nearly fix all warnings.
(Most of the unfixed warnings are spam, things MPlayer never cared
about, or false positives.)
Commit 4d14a42, a seemingly harmless change, introduced very bad cache
behavior when the cache isn't forked, such as on Windows, where it uses
threads. Apparently the cache code was designed for forking, and an
unknown obscure condition causes severe performance degradation if a
STREAM_CTRL is sent to the cache on every frame.
Since the cache code is literally insane (uses shared memory + fork(),
and has hacks to make it work with threads, is messed into the stream
code in extra-hacky ways), we just fix it by caching the STREAM_CTRL in
question.
This is also done for some other STREAM_CTRLs that are called on each
frame, such as playback duration. This indicates that the cache code has
some inherent problem with answering such requests in a timely matter,
and that there's no easy way around this.
(Even if the cache is eventually rewritten, these things will probably
have to be cached, otherwise you'd have to forcibly block until the
stream implementation is done with a blocking read. The real question
is why it worked fine with the forked cache, though.)
Will be needed to override the demuxer's start time reporting. We could
be lazy and special-case it since the result is always 0 for the streams
that care, but doing it properly is better.
DVD playback uses a demuxer that signals to the frontend that timestamp
resets are possible. This made the frontend calculate the OSD playback
position based on the byte position and the total size of the stream.
This actually broke DVD playback position display. Since DVD reports a
a linear playback position, we don't have to rely on the demuxer
reported position, so disable this functionality in case of DVD
playback. This reverts the OSD behavior with DVD to the old behavior.
br://: Fix querying current chapter.
This also fixes specifying an end chapter via -chapter.
Based on patch by Olivier Rolland [billl users.sourceforge.net]
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@36173 b3059339-0415-0410-9bf9-f77b7e298cf2
Remove the "object settings" based track range parsing (needed by
stream_cdda only), and make stream_cdda use CONF_TYPE_INT_PAIR.
This makes the -vf parsing code completely independent from other
options. A bit of that code was used by the mechanism removed with
this commit.
ntddcdrm.h is no longer under the 'ddk' directory in MinGW-w64,
and since MPV focuses on it instead of the old MinGW32, there's no
reason to keep that dir prefix, as it stops VCD support from being
built at all for Windows.
Handle the severely broken headers QuickTime Streaming Server sends.
Instead of ending the header with \r\n\r\n it ends with
\r\n<4 byte MP3 header>\r\n.
And programs like wget just silently accept this without even
printing a warning!!
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35988 b3059339-0415-0410-9bf9-f77b7e298cf2
Note: see previous commit.
Support broken icy-metaint response from QuickTime Streaming Server.
The full version string is "QuickTime Streaming Server 6.1.0/532".
It sends a HTTP response header that contains an MP3 header!
Fixes bug #2133.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35987 b3059339-0415-0410-9bf9-f77b7e298cf2
Note that in mpv, "http://" is mapped to ffmpeg currently, and this
code is unused by default.
Clean up ifdefs so they make sense even if none or multiple are defined.
Also choose Linux as fallback case instead of failing, this
allows the code to compile e.g. on Android.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35971 b3059339-0415-0410-9bf9-f77b7e298cf2
clang printed warnings like:
stream/stream.c:692:65: warning: if statement has empty body [-Wempty-body]
GET_UTF16(c, src < end - 1 ? get_le16_inc(&src) : 0,;
This macro expands to "if(cond) ;". Replace it with an empty statement
that doesn't lead to a clang warning.
SHOUTcast bans "Mozilla" in the user-agent, Vimeo bans "Lavf" (part of
the libavformat normal user-agent). "MPlayer 1.1-..." seems to work
everywhere, and is close to the intented use (mpv is based on MPlayer,
after all).
Use codec names instead of FourCCs to identify codecs. Rewrite how
codecs are selected and initialized. Now each decoder exports a list
of decoders (and the codec it supports) via add_decoders(). The order
matters, and the first decoder for a given decoder is preferred over
the other decoders. E.g. all ad_mpg123 decoders are preferred over
ad_lavc, because it comes first in the mpcodecs_ad_drivers array.
Likewise, decoders within ad_lavc that are enumerated first by
libavcodec (using av_codec_next()) are preferred. (This is actually
critical to select h264 software decoding by default instead of vdpau.
libavcodec and ffmpeg/avconv use the same method to select decoders by
default, so we hope this is sane.)
The codec names follow libavcodec's codec names as defined by
AVCodecDescriptor.name (see libavcodec/codec_desc.c). Some decoders
have names different from the canonical codec name. The AVCodecDescriptor
API is relatively new, so we need a compatibility layer for older
libavcodec versions for codec names that are referenced internally,
and which are different from the decoder name. (Add a configure check
for that, because checking versions is getting way too messy.)
demux/codec_tags.c is generated from the former codecs.conf (minus
"special" decoders like vdpau, and excluding the mappings that are the
same as the mappings libavformat's exported RIFF tables). It contains
all the mappings from FourCCs to codec name. This is needed for
demux_mkv, demux_mpg, demux_avi and demux_asf. demux_lavf will set the
codec as determined by libavformat, while the other demuxers have to do
this on their own, using the mp_set_audio/video_codec_from_tag()
functions. Note that the sh_audio/video->format members don't uniquely
identify the codec anymore, and sh->codec takes over this role.
Replace the --ac/--vc/--afm/--vfm with new --vd/--ad options, which
provide cover the functionality of the removed switched.
Note: there's no CODECS_FLAG_FLIP flag anymore. This means some obscure
container/video combinations (e.g. the sample Film_200_zygo_pro.mov)
are played flipped. ffplay/avplay doesn't handle this properly either,
so we don't care and blame ffmeg/libav instead.
Playing vimeo links using quvi support didn't work, even though clive
could. clive is using quvi and curl to download videos from streaming
sites, so if clive works mpv should always work as well. It didn't, and
it turned out that it was due to the user agent. Change the default
from whatever Lavf sends to what clive and cclive use. This will
probably always work, as c(c)live are by the same author as libquvi,
and there's a high chance it has been tested with all the supported
sites.
This didn't work properly for HTTP with libavformat. The builtin HTTP
implementation reconnects automatically on its own, while libavformat
doesn't. Fix this by adding explicit reconnection support to
stream_lavf.c, which simply destroys and recreates the AVIO context.
It mostly works, though sometimes it mysteriously fails, spamming crap
all over the terminal and feeding broken data to the decoders. This is
probably due to itneractions with the cache. Also, reconnecting to
unseekable HTTP streams will make it read the entire stream until the
previous playback position is reached again.
It's not known whether this change makes behavior with "strange"
protocols like RTP better or worse.
The "http:" protocol has been switched to use ffmpeg's HTTP
implementation some time ago. One problem with this was that many HTTP
specific options stopped working, because they were obviously
implemented for the internal HTTP implementation only.
Add the missing things. Note that many options will work for ffmpeg
only, as Libav's HTTP implementation is missing these. They will
silently be ignored on Libav.
Some options we can't fix:
--ipv4-only-proxy, --prefer-ipv4, --prefer-ipv6
As far as I can see, not even libavformat internals distinguish
between ipv4 and ipv6.
--user, --passwd
ffmpeg probably supports specifying these in the URL directly.
mplayer's video chain traditionally used FourCCs for pixel formats. For
example, it used IMGFMT_YV12 for 4:2:0 YUV, which was defined to the
string 'YV12' interpreted as unsigned int. Additionally, it used to
encode information into the numeric values of some formats. The RGB
formats had their bit depth and endian encoded into the least
significant byte. Extended planar formats (420P10 etc.) had chroma
shift, endian, and component bit depth encoded. (This has been removed
in recent commits.)
Replace the FourCC mess with a simple enum. Remove all the redundant
formats like YV12/I420/IYUV. Replace some image format names by
something more intuitive, most importantly IMGFMT_YV12 -> IMGFMT_420P.
Add img_fourcc.h, which contains the old IDs for code that actually uses
FourCCs. Change the way demuxers, that output raw video, identify the
video format: they set either MP_FOURCC_RAWVIDEO or MP_FOURCC_IMGFMT to
request the rawvideo decoder, and sh_video->imgfmt specifies the pixel
format. Like the previous hack, this is supposed to avoid the need for
a complete codecs.cfg entry per format, or other lookup tables. (Note
that the RGB raw video FourCCs mostly rely on ffmpeg's mappings for NUT
raw video, but this is still considered better than adding a raw video
decoder - even if trivial, it would be full of annoying lookup tables.)
The TV code has not been tested.
Some corrective changes regarding endian and other image format flags
creep in.
xylosper
wm4
Philip Sequeira
James Ross-Gowan
Stefano Pigozzi
reimar
Andre D
Miro Hrončok
bugmen0t
Christian Neukirchen
Noble Huang
Diogo Franco (Kovensky)
Jonathan Yong
Martin Herkt
Stephen Hutchinson
Uoti Urpala