When stats.lua is used without a video window then it uses the terminal.
On Windows, however, so far it disabled ansi escape sequences and used
plaintext unless ANSICON env is set.
It's unclear why it's disabled on windows, because at the time it was
added it only used bold by default and mpv ansi emulation on windows
already supported bold at that time.
We can guess that it was disabled because if the same config is used on
both linux and Windows, and it had complex escape sequences for
stats.lue, then it would be emulated incorrectly on Windows.
This shouldn't be an issue anymore, as the last two commits both enhance
the emulation to be quite complete (and graceful where it's not), and
also enable the much-more complete native VT terminal when possible
(Windows 10).
Just remove this windows exception at stats.lua.
It is more consistent for editions/chapters to go below either
the title or filename. They are all descriptive strings about
the media itself and not file metadata like filesize.
Suggested by Argon-
Edition information is conditional based on there being more than
one edition present. It is printed on the same line as Chapters to
save vertical space.
Keys and lines-to-scroll are configurabe, and the scroll keys are only
bound on pages which support scrolling (currently only page 4) - also
during oneshot (like the page-switching keys).
Scroll offset is reset for all pages on any key - except scroll keys, so
that entering or switching to a page resets the scroll, as well as when
"re-entering" the same page or "re-activating" the stats oneshot view.
TODO: print_page(..) is highly associated with extending the oneshot
timer if required. The timer handling can probably move into print_page
and removed from all the places which boilerplate its management.
This used 1 MB due to building the complete command and property list
when starting the script. These are needed only for auto-completion, so
build them only on demand. Since building them is fast enough, rebuild
them every time.
The key bindings table is not that much, but saves some KBs. Oddly, the
code to build it uses less memory than the table at runtime (???), so
build it at runtime as well.
Add 2 tactic collectgarbage() calls as well. This frees unused heap when
it is known that the script is going to be completely inactive until
re-enabled by the user.
In this case, init_buffers() was not called, and the unrelated cache
sample buffers were not initialized. It appears they are indeed
completely unrelated, so move their initialization away. Not sure what
exactly the purpose of calling init_buffers() is, maybe clearing old
data when displaying stats again. The new place for initializing the
cache sample buffers should achieve the same anyway.
Fixes: #7597
Add an infrastructure for collecting performance-related data, use it in
some places. Add rendering of them to stats.lua.
There were two main goals: minimal impact on the normal code and normal
playback. So all these stats_* function calls either happen only during
initialization, or return immediately if no stats collection is going
on. That's why it does this lazily adding of stats entries etc. (a first
iteration made each stats entry an API thing, instead of just a single
stats_ctx, but I thought that was getting too intrusive in the "normal"
code, even if everything gets worse inside of stats.c).
You could get most of this information from various profilers (including
the extremely primitive --dump-stats thing in mpv), but this makes it
easier to see the most important information at once (at least in
theory), partially because we know best about the context of various
things.
Not very happy with this. It's all pretty primitive and dumb. At this
point I just wanted to get over with it, without necessarily having to
revisit it later, but with having my stupid statistics.
Somehow the code feels terrible. There are a lot of meh decisions in
there that could be better or worse (but mostly could be better), and it
just sucks but it's also trivial and uninteresting and does the job. I
guess I hate programming. It's so tedious and the result is always shit.
Anyway, enjoy.
I think that makes more sense.
And also remove the graph from the total cache usage, since that wasn't
very interesting. So there's still a total of 2 graphs.
Lua changed behavior for this specific event. I considered the change
minor enough that it would not need to go through deprecation, but
someone hit it immediately and ask on the -dev channel.
It's probably better to restore the behavior. But mark it as deprecated,
since it's problematic (mismatch with the C API). Unfortunately, no
automatic warning is possible. (Or maybe it is, by playing sophisticated
Lua tricks such as setting a metatable and overriding indexing, but
let's not.)
The message_timeout field was basically polled. But ever since the OSC
was changed to work more event based, this didn't quite work. It was
quite visible when switching subtitle or audio tracks while paused (and
with caching disabled, since the cache update triggered some extra
redrawing).
Fix by using a proper timer.
I noticed that changing tracks with the message call commented didn't
redraw properly either, but, uh, I guess the message is always triggered
anyway, and happens to take care of this.
This is more or less a minimal hack to make _some_ text measurement
functionality available to scripts. Since libass does not support such a
thing, this simply uses the bounding box of the rendered text.
This is far from ideal. Problems include:
- using a bitmap bounding box
- additional memory waste and/or flushing caches
- dependency on window size
- odd small deviations with different window sizes (run osd-test.lua and
resize the window after each timer update; the bounding boxes aren't
adjusted in an overly useful way)
- inability to query the size _after_ actual rendering
But I guess it's a start. Since I'm aware that it's crap, add a threat
to the manpage that this may be changed/removed again. For now, I'm
interested whether anyone will have use for it in its current form, as
it's an often requested feature.
The "seekbarkeyframes" option is now interpreted such if it's true, the
player default is used. Too lazy to make this a choice option or
whatever; the Lua option parser doesn't have support for that anyway.
Someone who cares can adjust this.
This was obviously nonsense. In Lua 5.1 this appeared to work correctly,
but it really turned "\." into "." (making the pattern accept any
character). The proper way is using "%" for escaping.
In all_formats mode, we've ignored what --ytdl-format did so far, since
we've converted the full format list, instead of just the formats
selected by youtube-dl.
But we can easily restore --ytdl-format behavior: just mark the selected
tracks as default tracks.
vbr and abr are the video and audio bitrates. Sometimes there is a weird
mix of any of them available, but in these cases, it's not good to fall
back to tbr if a specific track has no vbr/abr.
For example, the alphabetic site provides tbr only for the muxed
fallback stream, but using tbr would make the primitive mpv hls_bitrate
selection pick the compatibility stream for audio, because it appears to
have a higher bitrate than the other audio-only streams (because the
bitrate includes video). So we must not use tbr in this case.
On the other hand, formats coming from youtube-dl HLS master playlist
use will only have tbr set.
So as a heuristic, use the tbr only if it's the only bitrate available
in any track entry.
I don't think the skip_muxed option was overlay useful. While it was
nice to filter out the low quality muxed versions (as it happens on the
alphabetic site, I suspect it's compatibility stuff), it's not really
necessary, and just makes for another tricky and rarely used
configuration option. (This was different before muxed tracks were also
delay-loaded, and including the muxed versions slowed down loading.)
Add the force_all_formats option instead, which handles the HLS case.
Set it to true because they are also delay-loaded now, and don't slow
down startup as much.
If all streams were delay loaded, there was actually no duration present
at all in the EDL metadata. So the length was considered unknown by the
player frontend.
See manpage additions. We would have to extend delay_open to support
multiple sub-tracks (for audio and video), and we'd still don't know (?)
whether it might contain more than one stream each (thinking of HLS
master streams). And if it's a true interleaved file (such as a "normal"
mp4 file provided as fallback for more primitive players), we'd either
have to signal such "bundled" tracks, or waste bandwidth.
This restructures a lot. The if/else tree in add_single_video for format
selection was a bit annoying, so it's split into separate if blocks,
where it checks each time whether a URL was determined yet.
If a "format" has both audio and video codec set, it might contain both
audio and video. all_format assumes that each format is just a quality
variant containing a single track.
This seems to happen with sites that provide a HLS master URL.
youtube-dl tends to "butcher" it, and the result isn't very ideal. I
guess HLS "renditions" simply don't map well to youtube-dl's output
format and what mpv expects. Playing master HLS directly is also less
than ideal, because of libavformat's stupid probing.
Fix this by not using the delay-opening mechanism if it appears like we
detected such a case. Add a metadata override to set the track titles to
"muxed-N", to indicate that they form a single unit. (Mostly helpful for
testing.)
Pretty worthless I guess. I only tested one site (and 2 videos), it's
somewhat likely that it will break with other sites. Even if you leave
the option disabled (the default).
Slightly related to #3548. This will allows you to use the bitrate
stream selection mechanism, that was added for HLS, with normal videos.
Uses the infrastructure added in the previous commits. This is
admittedly a bit weird (constructing EDL URLs and such). But on the
other hand, adding this as "first class" mechanism directly to the
sub-add command or so would increase weirdness and unexpected behavior
in other places, or at least that's what I think.
To reduce confusion, this goes through the effort of mapping the webvtt
codec, so it's shown "properly" in the codec list. Without this it would
show "null", but still work. In particular, any non-webvtt codecs should
still work if libavcodec supports it.
Not sure if I should remove the --all-subs hack from the code. But I
guess it does no harm.
While mpv normally uses the text a key produces (as opposed to physical
key mappings), this is different with the keypad. This is for the sake
of making it possible to distinguish between these keys and the normal
number keys on the left side of a full size keyboard.
There were complaints that the keypad doesn't interact with console.lua,
so manually map them. This ignores numlock (behaves as if it's always
on), and maps KP_DEC to "." (even though it's mapped to "," on some
keyboards). The /*-+ keys produce ASCII on mpv (at least with X11) as an
inexplicable inconsistency, so there are no mappings for these.
Fixes: #7431
The script was set up to only call on_update when the changelist
was non-empty. However, since the size operator does not operate
on dicts, it always returned 0 (which is truthy), thus on_update
would always be called when the script-opts property changed.
When switching between having a video visible or not,
stats.lua now picks up the required formatting changes
for the cache stats page to display correctly.
this deprecates the old cocoa backend only option and moves it to the
general macos ones. add support for the new option in the cocoa-cb
layer creation and use the new option in the olde cocoa backend.
Fixes#7272
Cache display updates, especially when it's bigger than few minute,
could have been be very infrequent to the point that one is not sure
if it updates at all.
Reduce the 10% change-threshold to 5% and add another threshold of 5s.
There are two improvements here:
1) Correct the right-side padding on the title box. This was messed
up previously because I was passing the title box width when I
should be passing the x coordinate. I've also increased the
spacing to separate the title from the window controls more
clearly.
2) I'ved added a mouse tracking area over the title bar so that the
osc doesn't disappear if you hover over the title box. This didn't
work previously because the input area only covers the actual
window controls. The implementation here is simplified in that
it's only a mouse area and not an input area. This is enough to
keep the osc visible, but it won't stop the mouse pointer
disappearing. Fixing that requires a full input area which, for
now, I will say isn't worth the effort.
It's a bit unintuitive today when you use the un-maximise control
while fullscreened. Depending on the VO in use, this might silently
change the maximise state without any visible effect, or it might
do nothing. It's less surprising if the control exits the fullscreen
state.
Note that the exact behaviour is still VO dependent. If the window
was maximised before being fullscreened, it might exit fullscreen
back to maximised or back to regular window mode.
I thought about trying to explicitly control that behaviour but
it makes the osc code weird and probably wouldn't work all the time.
The idea is that if the player is resized, we do not delay redrawing
(which is normally done to limit the redraw rate to something
reasonable).
Not sure if this even does anything. For one, reacting to osd-dimensions
changes is cleaner than just polling the screen size with the next tick
event, and hoping that resizes generate tick events for whatever
logically unrelated reasons.
See previous commit.
A nice side-effect is that mp.get_osd_margins() is not a special
Lua-only thing anymore. I didn't test whether this function still works
as expected, though.
Currently, the activation and deactivation of input handling is done
inside the render() loop, but this does not run when the osc mode is
`never` - which does make sense.
That means that if you are cycling the visibility mode, the input
state will be whatever it was at the time of the mode change. And,
as our modes are ordered `auto` -> `always` -> `never`, the input
state will be enabled when you cycle to `never`.
There are various ways you can imagine fixing this, and in this
change I propose we reset the input state to disabled on a mode
change, and then let render() re-enable input if that's appropriate.
Fixes#7298.