If either of them is not defined, the old behavior is used:
- the colormatrix is guessed based on resolution.
- the color range is assumed to be tv aka limited range.
This was done with the help of callcatcher [1]. Only functions which
are statically known to be unused are removed.
Some unused functions are not removed yet, because they might be needed
in the near future (such as open_output_stream for the encode branch).
There is one user visible change: the --subcc option did nothing, and is
removed with this commit.
[1] http://www.skynet.ie/~caolan/Packages/callcatcher.html
Most of these demuxers and decoders are provided in better form by
libav, while the mplayer builtin ones are essentially unmaintained. The
only legimitate use case for not using the libav ones was working around
libav bugs or bugs related to the way mplayer uses libav. Instead of
trying to keep dead code alive, development effort should go into
improving libav or the mplayer libav glue code.
Note that the libav demuxer have been preferred over the mplayer builtin
ones for a while in mplayer2. There were some exceptions: playing DVDs
with dvdnav or playing network sources. (That's because some stream
modules and network.c requested explicit file formats, such as
DEMUXER_TYPE_MPEG_PS, which mapped to builtin demuxers.) With this
commit, they are switched to use libav. One caveat is that the requested
format is not passed to libavformat, instead we rely on the auto probing
to select the correct libav demuxer (see code in demux_open_stream()).
The code used for benchmarking and showing CPU stats in the status line
was inaccurate, misleading and fragile. The final nail in the coffin is
the fact that many libav decoders are multithreaded now, and mplayer
couldn't possibly measure the CPU time consumed by them.
Add the --untimed option. This makes the video untimed, just like
--benchmark did (still requires disabling audio synchronization).
Ancient AMD specific enhancement to the MMX instruction set. Officually
discontinued by AMD.
Note that support for this was already disabled in the previous commit.
This commit removes the actual code.
Add support for using libavcodec decoders that do not have entries in
codecs.conf. This is currently only used with demux_lavf, and the
codec selection is based on codec_id returned by libavformat. Also
modify codec-related terminal output somewhat to make it use
information from libavcodec and avoid excessively long default output.
The new any-lavc-codec support is implemented with codecs.conf entries
that invoke vd_ffmpeg/ad_ffmpeg without directly specifying any
libavcodec codec name. In this mode, the decoders now instead select
the libavcodec codec based on codec_id previously set by demux_lavf
(if any). These new "generic" codecs.conf entries specify "status
buggy", so that they're tried after any specific entries with
higher-priority status.
Add new directive "anyinput" to codecs.conf syntax. This means the
entry will always match regardless of fourcc. This is used for the
above new codecs.conf entries (so the driver always gets to decide
whether to accept the input, and will fail init() if it can't find a
suitable codec in libavcodec). Remove parsing support for the obsolete
codecs.conf directive "cpuflags". This directive has not had any
effect and has not been used in default codecs.conf since many years
ago.
Shorten codec-related terminal output. When using libavcodec decoders,
show the libavcodec long_name field rather than codecs.conf "info"
field as the name of the codec. Stop showing the codecs.conf entry
name and "vfm/afm" name by default, as these are rarely needed;
they're now in verbose output only. Show "VIDEO:" line at VO
initialization rather than at demuxer open. This didn't really belong
in demuxer code; the new location may show more accurate values (known
after decoder has been opened) and works right if video track is
changed after initial demuxer open.
The vd.c changes (primarily done for terminal output changes) remove
round-to-even behavior from code setting dimensions based on aspect
ratio. I hope nothing depended on this; at least the even values were
not consistently guaranteed anyway, as the rounding code did not run
if the video file did not specify a nonzero aspect value.
Previously the core sent VFCTRL_REDRAW_OSD to change OSD contents over
the current frame. Change this to VFCTRL_REDRAW_FRAME followed by
normal EOSD and OSD drawing calls, then vo_flip_page(). The new
version supports changing EOSD contents for libass-rendered subtitles
and simplifies the redraw support code needed per VO. vo_xv doesn't
support EOSD changes because it relies on vf_ass to render EOSD
contents earlier in the filter chain.
vo_xv logic is additionally simplified because the previous commit
removed the need to track the status of current and next images
separately (now each frame is guaranteed to become "visible" soon
after we receive it as "next", with no VO code running in the interval
between).
The implementation of the switch_ratio command was hacky and called
mpcodecs_config_vo() to reconfigure the filter/VO chain from under an
existing decoder. This call no longer worked properly with vd_ffmpeg
after that started using mpcodec_config_vo2(). Add new video decoder
control command VDCTRL_RESET_ASPECT and use this to tell vd_ffmpeg to
reinitialize the output chain properly.
Codec selection for audio and video decoding had a "dynamic plugin"
feature that tried to load a shared library for any codec that had not
been enabled at compilation (disabled by default, but could be enabled
with --enable-dynamic-plugins configure switch; for unknown reasons
some distro packages have enabled it). The implementation was buggy
and could cause normal codec selection fallback to fail if the feature
was enabled. I'm not aware of any real uses of such dynamic plugins
and the feature seems questionable anyway (there are no ABI guarantees
that would make it safe to use). Remove the buggy feature.
Rewrite control of the colorspace and input/output level parameters
used in YUV-RGB conversions, replacing VO-specific suboptions with new
common options and adding configuration support to more cases.
Add new option --colormatrix which selects the colorspace the original
video is assumed to have in YUV->RGB conversions. The default
behavior changes from assuming BT.601 to colorspace autoselection
between BT.601 and BT.709 using a simple heuristic based on video
size. Add new options --colormatrix-input-range and
--colormatrix-output-range which select input YUV and output RGB range.
Disable the previously existing VO-specific colorspace and level
conversion suboptions in vo_gl and vo_vdpau. Remove the
"yuv_colorspace" property and replace it with one named "colormatrix"
and semantics matching the new option. Add new properties matching the
options for level conversion.
Colorspace selection is currently supported by vo_gl, vo_vdpau, vo_xv
and vf_scale, and all can change it at runtime (previously only
vo_vdpau and vo_xv could). vo_vdpau now uses the same conversion
matrix generation as vo_gl instead of libvdpau functionality; the main
functional difference is that the "contrast" equalizer control behaves
somewhat differently (it scales the Y component around 1/2 instead of
around 0, so that contrast 0 makes the image gray rather than black).
vo_xv does not support level conversion. vf_scale supports range
setting for input, but always outputs full-range RGB.
The value of the slave properties is the policy setting used for
conversions. This means they can be set to any value regardless of
whether the current VO supports that value or whether there currently
even is any video. Possibly separate properties could be added to
query the conversion actually used at the moment, if any.
Because the colorspace and level settings are now set with a single
VF/VO control call, the return value of that is no longer used to
signal whether all the settings are actually supported. Instead code
should set all the details it can support, and ignore the rest. The
core will use GET_YUV_COLORSPACE to check which colorspace details
have been set and which not. In other words, the return value for
SET_YUV_COLORSPACE only signals whether any kind of YUV colorspace
conversion handling exists at all, and VOs have to take care to return
the actual state with GET_YUV_COLORSPACE instead.
To be changed in later commits: add missing option documentation.
Pass the libavformat packet side_data field from demux_lavf to
vd_ffmpeg. Libavcodec/libavformat use this field for palette data, and
passing it is required for the playback of some paletted video codecs.
The implementation works by giving vd_ffmpeg a copy of the struct
demux_packet used to store the video packet (from which it can access
the avpacket field). The definition of struct demux_packet is moved to
new file demux_packet.h so that vd_ffmpeg.c can use it without
including all of demuxer.h.
Note that r30455 is wrong, that commit does not in fact change the
default behavior as claimed in the commit message. It only breaks
"-af-adv force=0", which was already pretty much useless though.
scattered all over the place with half of it forgotten in some places.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@30420 b3059339-0415-0410-9bf9-f77b7e298cf2
Add a mode where libavcodec's reordered_opaque feature is used to
associate container packet timestamps with decoded frames. This should
improve behavior at least for MPEG files with interlaced h264; the
previous code does not cope well with the libavformat demuxer
producing two field packets with separate timestamps but the
libavcodec h264 decoder only producing a single output frame for those
two packets (so half the timestamps have no associated output frame).
The current libavformat mpeg demuxer seems to finally work with
interlaced h264 files and produce valid timestamps which are useful
with a mode like this.
By default MPlayer now selects between this new mode and the old one
automatically based on the number of timestamp problems they cause; by
default the new mode is used if both seem to work. The new option
-pts-association-mode can be used to force a particular mode. If
correct-pts mode is disabled this has no effect on timing.
Also remove the "EXPERIMENTAL" marker from the manpage description of
-correct-pts.
below the OSD and document possible issues when this is changed.
Patch by Uoti (though originally intended for a different issue) with extra comment by me.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@28841 b3059339-0415-0410-9bf9-f77b7e298cf2
Convert vo_x11_border (used in vo_gl/gl2 though the vo_gl_border
macro) to use a wrapper macro in old-style VOs which do not provide a
VO object argument. Before this function had an explicit global_vo
argument in vo_gl/gl2. New vo_vdpau uses it too so use the same
mechanism as most other functions.
and #ifdef HAVE_MMX etc -> #if HAVE_MMX.
There might be still more that need to be fixed.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@28325 b3059339-0415-0410-9bf9-f77b7e298cf2
Move the OSD drawing calls from filter_video() to higher-level code to
ensure that VOs will draw the OSD also in filter-added frames, which
are displayed without a separate call to filter_video().
When OSD contents change while paused, try to change the OSD drawn in
the currently visible frame. If such OSD updates are not supported
then advance by one frame and draw the OSD normally. Add some support
for OSD redrawing to vo xv.
The new xv code makes a copy of the original frame contents before
drawing the OSD if MPlayer is already paused when the frame is drawn.
If such a copy of the current frame exists then the frame contents can
be restored and a different OSD drawn on top of the same frame.
vo gl generates bitmaps for EOSD content (libass subtitles) when
DRAW_EOSD is called but actual drawing of both EOSD and OSD is done in
draw_osd(). Since draw_osd() was called first it drew the EOSD content
from the previous frame, so the subtitles were always one frame late.
As a simple workaround update EOSD content first, then normal OSD.
This makes vo gl work correctly and should have no effect on anything
else.
We were using an inconsistent mix of the three variants and 'volatile' should
be the most correct and portable variant.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@27791 b3059339-0415-0410-9bf9-f77b7e298cf2
Neither variant is valid C99 syntax, but __asm__ is the most portable variant.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@27788 b3059339-0415-0410-9bf9-f77b7e298cf2
Replace all USE_ prefixes by CONFIG_ prefixes to indicate
options which are configurable.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@27373 b3059339-0415-0410-9bf9-f77b7e298cf2
This commit creates the struct and passes it to some functions that
needs to access OSD state but does not yet move much data from globals
to it.
vf_expand accesses the OSD state for rendering purposes outside of the
normal OSD draw time. The way this currently works is suboptimal, but
I did not attempt to clean it up now. To keep things working the same
way vf_expand needs to know the address of the state object to be able
to access the data even in the functions that should normally not need
it. For that purpose this commit adds a VFCTRL to tell vf_expand the
address of the object.
Remove the global variable mpvdec and move the video decoder pointer
to struct sh_video field vd_driver. Audio already had a similar
ad_driver field from before.
"indent -kr -l79 -nut dec_video.c --ignore-newlines dec_video.c", fix
some "unknown_typedef * arg" in parameter lists by hand to
"unrecognized_typedef *arg".
an almost-trivial implementation.
This allows making the builtin codec structs const, and it also makes
clearer that this "selected" status is not used outside the init functions.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@25689 b3059339-0415-0410-9bf9-f77b7e298cf2
