There are some use cases for this. For example, you can use it to set
defaults of automatically inserted filters (like af_lavrresample). It's
also useful if you have a non-trivial VO configuration, and want to use
--vo to quickly change between the drivers without repeating the whole
configuration in the --vo argument.
The AF control commands used an elaborate and unnecessary organization
for the command constants. Get rid of all that and convert the
definitions to a simple enum. Also remove the control commands that
were not really needed, because they were not used outside of the
filters that implemented them.
And by "cleanup", I mean "remove". Actually, only remove the parts that
are redundant and doxygen noise. Move useful parts to the comment above
the function's implementation in the C source file.
Commit 22b3f522 not only redid major aspects of audio decoding, but also
attempted to fix audio format change handling. Before that commit, data
that was already decoded but not yet filtered was thrown away on a
format change. After that commit, data was supposed to finish playing
before rebuilding filters and so on.
It was still buggy, though: the decoder buffer was initialized to the
new format too early, triggering an assertion failure. Move the reinit
call below filtering to fix this.
ad_mpg123.c needs to be adjusted so that it doesn't decode new data
before the format change is actually executed.
Add some more assertions to af_play() (audio filtering) to make sure
input data and configured format don't mismatch. This will also catch
filters which don't set the format on their output data correctly.
Regression due to planar_audio branch.
Before this commit, the af_instance->mul/delay values were in bytes.
Using bytes is confusing for non-interleaved audio, so switch mul to
samples, and delay to seconds. For delay, seconds are more intuitive
than bytes or samples, because it's used for the latency calculation.
We also might want to replace the delay mechanism with real PTS
tracking inside the filter chain some time in the future, and PTS
will also require time-adjustments to be done in seconds.
For most filters, we just remove the redundant mul=1 initialization.
(Setting this used to be required, but not anymore.)
Allocate af_instance->data in generic code before filter initialization.
Every filter needs af->data (since it contains the output
configuration), so there's no reason why every filter should allocate
and free it.
Remove RESIZE_LOCAL_BUFFER(), and replace it with mp_audio_realloc_min().
Interestingly, most code becomes simpler, because the new function takes
the size in samples, and not in bytes. There are larger change in
af_scaletempo.c and af_lavcac3enc.c, because these had copied and
modified versions of the RESIZE_LOCAL_BUFFER macro/function.
Based on earlier work by Stefano Pigozzi.
There are 2 changes:
1. Instead of mp_audio.audio, mp_audio.planes[0] must be used.
2. mp_audio.len used to contain the size of the audio in bytes. Now
mp_audio.samples must be used. (Where 1 sample is the smallest unit
of audio that covers all channels.)
Also, some filters need changes to reject non-interleaved formats
properly.
Nothing uses the non-interleaved features yet, but this is needed so
that things don't just break when doing so.
My main problem with this is that the output format will be incorrect.
(This doesn't matter right, because there are no samples output.)
This assumes all audio filters can deal with len==0 passed in for
filtering (though I wouldn't see why not).
A filter can still signal an error by returning NULL.
af_lavrresample has to be fixed, since resampling 0 samples makes
libavresample fail and return a negative error code. (Even though it's
not documented to return an error code!)
This should allow to make format negotiation much simpler, since it
takes the responsibility to compare actual input and accepted input
formats from the filters. It's also backwards compatible. Filters which
have expensive initialization still can use the old method.
It's probably better if all auto-inserted filters are removed when doing
an af_add operation. If they're really needed, they will be
automatically re-added.
Fix the error message. It used to be for an actual internal error, but
now it happens when format negotiation fails, e.g. when trying to use
spdif and real audio filters.
The configure followed 5 different convetions of defines because the next guy
always wanted to introduce a new better way to uniform it[1]. For an
hypothetic feature 'hurr' you could have had:
* #define HAVE_HURR 1 / #undef HAVE_DURR
* #define HAVE_HURR / #undef HAVE_DURR
* #define CONFIG_HURR 1 / #undef CONFIG_DURR
* #define HAVE_HURR 1 / #define HAVE_DURR 0
* #define CONFIG_HURR 1 / #define CONFIG_DURR 0
All is now uniform and uses:
* #define HAVE_HURR 1
* #define HAVE_DURR 0
We like definining to 0 as opposed to `undef` bcause it can help spot typos
and is very helpful when doing big reorganizations in the code.
[1]: http://xkcd.com/927/ related
Roughly follows MPlayer svn commits 36492 and 36493. We also remove
the volume peak reporting. (There are much better libavfilter filters
for this, I think.)
af_format is the old audio conversion filter. It could do all possible
conversions supported by the audio chain. However, ever since the
addition of af_lavrresample, most conversions are done by
libav/swresample, and af_format is used as fallback.
Separate out the fallback cases and remove af_format. af_convert24 does
24 bit <-> 32 bit conversions, while af_convertsignendian does sign and
endian conversions. Maybe the way the conversions are split sounds a bit
odd. But the former changes the size of the audio data, while the latter
is fully in-place, so there's at least different buffer management.
This requires a quite complicated algorithm to make sure all these
"partial" conversion filters can actually get from one format to
another. E.g. s24le->s32be always requires convertsignendian and
convert24, but af.c has no idea what the intermediate format should
be. So I added a graph search (trying every possible format and
filter) to determine required format and filter. When I wrote this,
it seemed this was still better than messing everything into
af_lavrresample, but maybe this is overkill and I'll change my
opinion. For now, it seems nice to get rid of af_format though.
The AC3->IEC61937 conversion isn't supported anymore, but I don't think
this is needed anywhere. Most AOs test all formats explicitly, or use
the AF_FORMAT_IS_IEC61937() macro (which includes AC3).
One positive consequence of this change is that conversions always
include dithering (done by libav/swresample), instead of possibly going
through af_format, which doesn't do anything fancy.
Rename af_force to af_format. It's essentially compatible with command
line uses of af_format. We retain a compatibility alias for af_force.
Calling them separately doesn't really make sense, and all existing
calls to them usually combined them. One subtitle difference was that
af_init() didn't wipe the filter chain if initialization of the chain
itself failed, but that didn't really make sense anyway.
Also remove af_init() from the code for setting balance in mixer.c. The
mixer should be in the initialized state only if audio is fully
initialized, so the af_init() call made no sense.
Note that the filter "editing" code in command.c doesn't really do a
nice job of handling errors in case recreating an _old_ (known to work)
filter chain unexpectedly fails, and this obscure/rare case might be
differently handled after this change.
In general, this warning can hint to actual bugs. We don't enable it
yet, because it would conflict with some unmerged code, and we should
check with clang too (this commit was done by testing with gcc).
Make the VF/VO/AO option parser available to audio filters. No audio
filter uses this yet, but it's still a quite intrusive change.
In particular, the commands for manipulating filters at runtime
completely change. We delete the old code, and use the same
infrastructure as for video filters. (This forces complete
reinitialization of the filter chain, which hopefully isn't a problem
for any use cases. The old code forced reinitialization too, but it
could potentially allow a filter to cache things; e.g. consider loaded
ladspa plugins and such.)
This code is supposed to run if dynamic filter insertion (such as when
inserting a volume filter in mixer.c) fails. Then it removes all filters
and recreates the default list of filters. But the code just blew up and
entered an endless loop, because it removed even the sentinel in/out
filters. This could happen when trying to use softvol controls while
using spdif, but also other situations. Fix it by calling the correct
code.
Also remove these obnoxious yoda-conditions.
Mostly copied from vf_lavfi. The parts that could be shared are minor,
because most code is about setting up audio and video, which are too
different.
This won't work with Libav. I used ffplay.c as guide, and noticed too
late that their setup methods are incompatible with Libav's. Trying to
make it work with both would be too much effort. The configure test for
av_opt_set_int_list() should disable af_lavfi gracefully when compiling
with Libav.
Due to option parser chaos, you currently can't have a "," as part of
the filter graph string - not even with quoting or escaping. This will
probably be fixed later.
The audio filter chain is not PTS aware. So we have to do some hacks
to make up a fake PTS, and we have to map the output PTS back to the
filter chain's method of tracking PTS changes and buffering, by
adjusting af->delay.
af_reinit() is responsible for inserting automatic conversion filters
for channel remixing, format conversion, and resampling. We don't
require that a single filter can do all these (even though
af_lavrresample does nearly all of this, sometimes af_format has to be
used instead for format conversions). This makes setting up the chain
more complicated, and a way is needed to prevent endless appending of
conversion filters if a conversion is not possible.
Until now, this used a stupidly simple yet robust static retry limit to
detect failure. This is perfectly fine, and the limit (20) was good
enough to handle about ~5 filters. But with more filters, and if each
filter requires 3 additional conversion filters, this would fail. So
raise the limit to 4 retries per filter. This is still stupidly simple
and robust, but won't arbitrarily fail if the filter count is too large.
mp_audio has some redundant fields. Setters like mp_audio_set_format()
initialize these properly.
Also move the mp_audio struct to a the file audio.c.
We can remove a mysterious line of code from af.c:
in.format |= af_bits2fmt(in.bps * 8);
I'm not sure if this was ever actually needed, or if it was some kind of
"make it work" quick-fix that works against the way things were supposed
to work. All filters etc. now set the format correctly, so if there ever
was a need for this code, it's definitely gone.
Add dummy input and output filters to remove special cases in the format
negotiation code (af_fix_format_conversion() etc.). The output of the
filter chain is now negotiated in exactly the same way as normal
filters.
Negotiate setting the sample rate in the same way as other audio
parameters. As a side effect, the resampler is inserted at the start of
the filter chain instead of the end, but that shouldn't matter much,
especially since conversion and channel mixing are conflated into the
same filter (due to libavresample's API).
Anything this option did has been removed in the preceding 3 commits.
Note that even though these options sounded like a good idea (like
setting accuracy vs. speed tradeoffs), they were not really properly
implemented.
All this option did was deciding whether the resample filter was to be
insert at the beginning or end of the filter chain. Always do what the
option set for accuracy did. I doubt it makes much of a difference.
libavresample does most things in just one go anyway, so it won't
matter.
Dangerous and misleading. If it turns out that this is actually needed
to make certain setups work right, it should be added back in a better
way (in a way it doesn't cause random crashes).
The only thing this option did was changing the behavior of af_volume.
The option decided what sample format af_volume would use, but only if
the sample format was not already float. If the option was set, it would
default to float, otherwise to S16.
Remove use of the option and all associated code, and make af_volume
always use float (unless a af_volume specific sub-option is set).
Silence maximum value tracking. This message is printed when the filter
is destroyed, and it's slightly annoying. Was enabled due to enabling
float by default.
Switch the internal channel order to libavcodec's. If the channel number
mismatches at some point, use libavresample for up- or downmixing.
Remove the old af_pan automatic downmixing.
The libavcodec channel order should be equivalent to WAVEFORMATEX order,
at least nowadays. reorder_ch.h assumes that WAVEFORMATEX and libavcodec
might be different, but all defined channels have the same mappings.
Remove the downmixing with af_pan as well as the channel conversion with
af_channels from af.c, and prefer af_lavrresample for this. The
automatic downmixing behavior should be the same as before (if the
--channels option is set to 2, which is the default, the audio output
is forced to 2 channels, and libavresample does all downmixing).
Note that mpv still can't do channel layouts. It will pick the default
channel layout according to the channel count. This will be fixed later
by passing down the channel layout as well.
af_hrtf depends on the order of the input channels, so reorder to ALSA
(for which this code was written). This is better than changing the
filter code, which is more risky.
ao_pulse can accept waveext order directly, so set that as channel
mapping.
If format negotiation fails, and additional filters are inserted to fix
this, don't try to reinitialize the filter immediately. Instead, correct
the audio format, and let the caller retry.
Add a retry counter to af_reinit() to ensure that misbehaving filters
can't put the format negotiation into an endless loop.
Refactor to remove the duplicated format filter insertion code. Allow
other format converting filters to be inserted on format mismatches.
af_info.test_conversion checks whether conversion between two formats
would work with the given filter; do this to avoid having to insert
multiple conversion filters at once and such things. (Although this
isn't ideal: what if we want to avoid af_format for some conversions?
What if we want to split af_format in endian-swapping filters etc.?)
Prefer af_lavrresample for conversions that it supports natively,
otherwise let af_format handle the full conversion.
Make sure automatically inserted filters are removed on full reinit
(they are re-added later if they are really needed). Automatically
inserted filters were never explicitly removed, instead, it was
expected that redundant conversion filters detach themselves. This
didn't work if there were several chained format conversion filters,
e.g. s16le->floatle->s16le, which could result from repeated filter
insertion and removal. (format filters detach only if input format and
output format are the same.)
Further, the dummy filter (which exists only because af.c can't handle
an empty filter chain for some reason) could introduce bad conversions
due to how the format negotiation works. Change the code so that the
dummy filter never takes part on format negotiation. (It would be better
to fix format negotiation, but that would be much more complicated and
would involving fixing all filters.)
Simplify af_reinit() and remove the start audio filter parameter. This
means format negotiation and filter initialization is run more often,
but should be harmless.
The change in af_scaletempo actually fixes a memory leak. af->data
contained a pointer to an allocated buffer, which was overwritten
during format negotiation. Set the format explicitly instead.
Remove `af_resample` and `af_lavcresample`. The former is a mess while the
latter uses an API that was long deprecated in libavcodec and is now removed.
`af_lavrresample` rougly has the same features and structure of
`af_lavcresample`.
libswresample fallback by wm4.
The previous name of this filter was misleading, because it doesn’t actually
normalize volume levels. What it does is closer to performing low-quality
dynamic range compression, hence it is now called af_drc.
This function sucks and apparently is not very portable (at least on
mingw, the configure check fails). Also remove the emulation of that
function from osdep/strsep*, and remove the configure check.
Tis drops the silly lib prefixes, and attempts to organize the tree in
a more logical way. Make the top-level directory less cluttered as
well.
Renames the following directories:
libaf -> audio/filter
libao2 -> audio/out
libvo -> video/out
libmpdemux -> demux
Split libmpcodecs:
vf* -> video/filter
vd*, dec_video.* -> video/decode
mp_image*, img_format*, ... -> video/
ad*, dec_audio.* -> audio/decode
libaf/format.* is moved to audio/ - this is similar to how mp_image.*
is located in video/.
Move most top-level .c/.h files to core. (talloc.c/.h is left on top-
level, because it's external.) Park some of the more annoying files
in compat/. Some of these are relicts from the time mplayer used
ffmpeg internals.
sub/ is not split, because it's too much of a mess (subtitle code is
mixed with OSD display and rendering).
Maybe the organization of core is not ideal: it mixes playback core
(like mplayer.c) and utility helpers (like bstr.c/h). Should the need
arise, the playback core will be moved somewhere else, while core
contains all helper and common code.