It seems libsmbclient has been GPLv3 for years. Also, it's certainly not
LGPL (unlike some of its support libs like talloc). Thus, mpv built with
Samba support is GPLv3.
Disable it by default, so we don't have to go through the trouble to
indicate the correct license in our output, and we don't trick people
into distributing stuff under the wrong license.
This causes the cache to be enabled with --cache=auto. It was not done
previously because the small cache size 320k actually led to worse
performance. However, with the current default cache size of 25000kb,
caching notably improves performance.
While I'm not very fond of "const", it's important for declarations
(it decides whether a symbol is emitted in a read-only or read/write
section). Fix all these cases, so we have writeable global data only
when we really need.
For some reason, we support writeable streams. (Only encoding uses that,
and the use of it looks messy enough that I want to replace it with FILE
or avio today.)
It's a chaos: most streams do not actually check the mode parameter like
they should. Simplify it, and let streams signal availability of write
mode by setting a flag in the stream info struct.
Stop using it in most places, and prefer STREAM_CTRL_GET_SIZE. The
advantage is that always the correct size will be used. There can be no
doubt anymore whether the end_pos value is outdated (as it happens often
with files that are being downloaded).
Some streams still use end_pos. They don't change size, and it's easier
to emulate STREAM_CTRL_GET_SIZE using end_pos, instead of adding a
STREAM_CTRL_GET_SIZE implementation to these streams.
Make sure int64_t is always used for STREAM_CTRL_GET_SIZE (it was
uint64_t before).
Remove the seek flags mess, and replace them with a seekable flag. Every
stream must set it consistently now, and an assertion in stream.c checks
this. Don't distinguish between streams that can only be forward or
backwards seeked, since we have no such stream types.
Previous to this commit, read_chunk was not set in stream_smb. The
cache was therefore filled in small 8K chunks. This resulted in poor
performance when compared to, for example, smbnetfs on the same
network.
The value of 128k is chosen both because it is emperically
the "levelling off point" for throughput into mpv's cache, and because
it is the value chosen by smbnetfs when serving smb shares to
mpv.
Note that this change has no effect unless --cache is explicitly
specified as smb:// streams do not activate cache by default. This is
because the default cache size of 320K is so small it actually makes
smb:// perfomance worse. For best results use at least --cache=1024.
I hate tabs.
This replaces all tabs in all source files with spaces. The only
exception is old-makefile. The replacement was made by running the
GNU coreutils "expand" command on every file. Since the replacement was
automatic, it's possible that some formatting was destroyed (but perhaps
only if it was assuming that the end of a tab does not correspond to
aligning the end to multiples of 8 spaces).
Since m_option.h and options.h are extremely often included, a lot of
files have to be changed.
Moving path.c/h to options/ is a bit questionable, but since this is
mainly about access to config files (which are also handled in
options/), it's probably ok.
The tmsg stuff was for the internal gettext() based translation system,
which nobody ever attempted to use and thus was removed. mp_gtext() and
set_osd_tmsg() were also for this.
mp_dbg was once enabled in debug mode only, but since we have log level
for enabling debug messages, it seems utterly useless.
The way the url_options field was handled was not entirely sane: it's
actually a flexible array member, so it points to garbage for streams
which do not initialize this member (it just points to the data right
after the struct, which is garbage in theory and practice). This was
not actually a problem, since the field is only used if priv_size is
set (due to how this stuff is used). But it doesn't allow setting
priv_size only, which might be useful in some cases.
Also, make the protocols array not a fixed size array. Most stream
implementations have only 1 protocol prefix, but stream_lavf.c has
over 10 (whitelists ffmpeg protocols). The high size of the fixed
size protocol array wastes space, and it is _still_ annoying to
add new prefixes to stream_lavf (have to bump the maximum length),
so make it arbitrary length.
The two changes (plus some more cosmetic changes) arte conflated into
one, because it was annoying going over all the stream implementations.
Move the URL parsing code from m_option.c to stream.c, and simplify it
dramatically. This code originates from times when http code used this,
but now it's just relict from other stream implementations reusing this
code. Remove the unused bits and simplify the rest.
stream_vcd is insane, and the priv struct is different on every
platform, so drop the URL parsing. This means you can't specify a track
anymore, only the device. (Does anyone use stream_vcd? Not like this
couldn't be fixed, but it doesn't seem worth the effort, especially
because it'd require potentially touching platform specific code.)
These were printed only with -v. Most streams had them set to useless
or redundant values, so it's just badly maintained bloat.
Since we remove the "author" field too, and since this may have
copyright implications, we add the contents of the author fields to
the file headers, except if the name is already part of the file header.
Stream implementations could set this to a unix file descriptor. The
generic stream code could use it as fallback for a few things. This
was confusing and insane. In most cases, the stream implementations
defined all callbacks, so setting the fd member didn't have any
advantages, other than avoiding defining a private struct to store it.
It appears that even if the stream implementation used close() on the
fd (or something equivalent), stream.c would close() it a second time
(and on windows, even would call closesocket()), which should be proof
for the insanity of this code.
For stream_file.c, additionally make sure we don't close stdin or
stdout if "-" is used as filename.
For stream_vcd.c, remove the control() code. This code most likely
didn't make the slightest sense, because it used a different type
for stream->priv. It also leaked memory. Maybe it worked, but it's
incorrect and insignificant anyway, so kill it. This code was added
with commit 9521c19 (svn commit 31019).
Untested for all protocols other than stream_file.c.
This removes the dependency on DEMUXER_TYPE_* and the file_format
parameter from the stream open functions.
Remove some of the playlist handling code. It looks like this was
needed only for loading linked mov files with demux_mov (which was
removed long ago).
Delete a minor bit of dead network-related code from stream.c as well.
EOF should be set when reading more data fails. The stream
implementations have nothing to say here and should behave correctly
when trying to read when EOF was actually read.
Even when seeking, a correct EOF flag should be guaranteed. stream_seek()
(or actually stream_seek_long()) calls stream_fill_buffer() at least
once, which also updates the EOF flag.
Update endpos each time libavformat asks for it.
Fixes playback of still downloading files to not stop before we
really reached the end.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35107 b3059339-0415-0410-9bf9-f77b7e298cf2
Conflicts:
libmpdemux/demux_lavf.c
Change STREAM_CTRL_GET_SIZE argument type from off_t to
uint64_t.
Also fix the incorrect type of the uint64_res variable.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@35360 b3059339-0415-0410-9bf9-f77b7e298cf2
Conflicts:
libmpdemux/demux_lavf.c
libmpdemux/muxer_lavf.c
Note: also merges the "forgotten" cache support from r35107.
Finish renaming directories and moving files. Adjust all include
statements to make the previous commit compile.
The two commits are separate, because git is bad at tracking renames
and content changes at the same time.
Also take this as an opportunity to remove the separation between
"common" and "mplayer" sources in the Makefile. ("common" used to be
shared between mplayer and mencoder.)
None of the calling sites to stream_write_buffer were checking the
return value to see if all bytes got written (nothing in current code
actually calls it any more after MEncoder was removed).
This was causing (very occasionally) problems with mencoder when using
output pipes AND running under a sandbox or when being straced (ptrace
is the culprit). Theoretically this problem can happen without pipes
or ptrace.
Only stream_file, stream_smb and stream_ffmpeg implement
write_buffer and ffmpeg already handles this internally.
Original patch by Sang-Uok Kum.
Signed-off-by: Tobias Diedrich <ranma@google.com>
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@32881 b3059339-0415-0410-9bf9-f77b7e298cf2
name clashes, in particular with Windows headers (which define STREAM_SEEK as an enum type).
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@29962 b3059339-0415-0410-9bf9-f77b7e298cf2
wm4
Marcin Kurczewski
Kevin Mitchell
Stefano Pigozzi
reimar
Uoti Urpala
Clément Bœsch
ranma
Uoti Urpala
diego
Amar Takhar
lorenm
nicodvb
ben