This affects only the "new" VO API. The config() title argument was barely
used, and it's hardcoded to "MPlayer" in vf_vo.c. The X11 and the Cocoa
GUI backends, which are the only ones properly supporting window titles,
ignored this argument. Remove the title argument.
Add the vo_get_window_title function. All GUI VOs are supposed to use it
for the window title.
Remove code refreshing window contents after events such as resize
from vo_vdpau, vo_gl and vo_xv. Instead have them simply set a flag
indicating that a refresh is needed, and have the player core perform
that refresh by doing an OSD redraw. Also add support for updating the
OSD contents over existing frames during slow-but-not-paused playback.
The VOs now also request a refresh if parameters affecting the picture
change (equalizer settings, colormatrix, VDPAU deinterlacing setting).
Even previously the picture was typically redrawn with the new
settings while paused because new OSD messages associated with setting
changes triggered a redraw, but this did not happen if OSD was turned
off.
A minor imperfection is that now window system events can trigger a
single one-frame step forward when using vo_xv after pausing so that
vo_xv does not yet have a copy of the current image. This could be
fixed but I think it's not important enough to bother.
Previously the core sent VFCTRL_REDRAW_OSD to change OSD contents over
the current frame. Change this to VFCTRL_REDRAW_FRAME followed by
normal EOSD and OSD drawing calls, then vo_flip_page(). The new
version supports changing EOSD contents for libass-rendered subtitles
and simplifies the redraw support code needed per VO. vo_xv doesn't
support EOSD changes because it relies on vf_ass to render EOSD
contents earlier in the filter chain.
vo_xv logic is additionally simplified because the previous commit
removed the need to track the status of current and next images
separately (now each frame is guaranteed to become "visible" soon
after we receive it as "next", with no VO code running in the interval
between).
Caveat: the OSD will be included in the screenshots when the screenshot is
taken during normal playback. This doesn't happen when a screenshot is
taken while playback is paused.
Fixing this would introduce a small performance reduction during normal
playback, which is unacceptable for a possibly rarely used optional
feature.
Due to the nature of the Xv API, taking a screenshot of the scaled video
isn't possible either.
Rewrite control of the colorspace and input/output level parameters
used in YUV-RGB conversions, replacing VO-specific suboptions with new
common options and adding configuration support to more cases.
Add new option --colormatrix which selects the colorspace the original
video is assumed to have in YUV->RGB conversions. The default
behavior changes from assuming BT.601 to colorspace autoselection
between BT.601 and BT.709 using a simple heuristic based on video
size. Add new options --colormatrix-input-range and
--colormatrix-output-range which select input YUV and output RGB range.
Disable the previously existing VO-specific colorspace and level
conversion suboptions in vo_gl and vo_vdpau. Remove the
"yuv_colorspace" property and replace it with one named "colormatrix"
and semantics matching the new option. Add new properties matching the
options for level conversion.
Colorspace selection is currently supported by vo_gl, vo_vdpau, vo_xv
and vf_scale, and all can change it at runtime (previously only
vo_vdpau and vo_xv could). vo_vdpau now uses the same conversion
matrix generation as vo_gl instead of libvdpau functionality; the main
functional difference is that the "contrast" equalizer control behaves
somewhat differently (it scales the Y component around 1/2 instead of
around 0, so that contrast 0 makes the image gray rather than black).
vo_xv does not support level conversion. vf_scale supports range
setting for input, but always outputs full-range RGB.
The value of the slave properties is the policy setting used for
conversions. This means they can be set to any value regardless of
whether the current VO supports that value or whether there currently
even is any video. Possibly separate properties could be added to
query the conversion actually used at the moment, if any.
Because the colorspace and level settings are now set with a single
VF/VO control call, the return value of that is no longer used to
signal whether all the settings are actually supported. Instead code
should set all the details it can support, and ignore the rest. The
core will use GET_YUV_COLORSPACE to check which colorspace details
have been set and which not. In other words, the return value for
SET_YUV_COLORSPACE only signals whether any kind of YUV colorspace
conversion handling exists at all, and VOs have to take care to return
the actual state with GET_YUV_COLORSPACE instead.
To be changed in later commits: add missing option documentation.
Set background color only when using ck-method=background. In the
other cases clearing of the non-video image area should be done
manually. Not drawing on the video image area prevents flickering
(visible when resizing).
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@33522 b3059339-0415-0410-9bf9-f77b7e298cf2
vo_xv set the "use_fs" parameter to vo_x11_clearwindow_part(). This
meant it always used the whole screen size to calculate the area to
clear. I can't see why overriding the vo->dwidth/dheight values would
ever be the right thing to do (if in fullscreen they should be set to
match that), so remove the use_fs parameter and always use the
dwidth/dheight values in the function. Also delete code drawing back
borders in vo_xv_draw colorkey. That should already happen in
vo_x11_clearwindow_part(); if it doesn't then things need to be fixed
anyway because colorkey code only ran in fullscreen mode (but borders
must work in window mode too).
Register the X11 connection fd in the input system so that
mp_input_get_cmd() can immediately wake up and handle keyboard or
other X events. The callback calls vo_check_events() and tells the
input system to handle any input possibly recorded during that. Before
this was done for vo_xv only; this commit generalizes it to all VOs
that call vo_x11_create_vo_window() - those are hopefully ones that
will handle all X events in check_events().
The callback is only kept registered while the vo is properly
configured. At other times calling check_events() would not clear
pending input and so could lead to a busy loop.
For some reason commit e306174952, which
replaced translation macro names with the corresponding English
strings, also collapsed multiple consecutive space characters into
one. Change most of these back. In a couple of cases the amount of
whitespace is important for alignment, and for the rest it at least
keeps the strings closer to the existing translations.
Add a property to select YUV colorspace. Currently implemented only in
vo_vdpau and vo_xv. Allows switching between BT.601, BT.709 and
SMPTE-240M (vdpau only).
The xv support uses the "XV_ITURBT_709" attribute. At least my NVIDIA
card supports that; I don't know whether other xv implementations do.
Bind the colorspace switch to the 'c' key by default. 'c' is currently
used by vo_sdl for some fullscreen mode change thing, but at the moment
that does not conflict and if it will in the future then vo_sdl can
change.
VDPAU part based on a patch from Lauri Mylläri <lauri.myllari@gmail.com>
* vdpau: (22 commits)
VO: Prefer vo_vdpau over vo_xv again
vo_vdpau: Fix X event handling bugs
vo_vdpau: Fix memory corruption bug with MP_IMGTYPE_NUMBERED
core/VO: Allow VO drivers to add/modify frames
video_out.h: Cosmetics
VO interface: Remove obsolete draw_frame() from new interface
vo_vdpau: Support recovering from VDPAU display preemption
vo_vdpau: Support updating OSD while paused
vo_vdpau.c: Reindent control() switch statement
vo_vdpau: Allocate one large surface for EOSD content
vo_vdpau.c: cosmetics
vo_vdpau: reindent after GUI code removal
vo_vpdau: Clean up uninit logic
vo_vdpau: Make CHECK_ST macro safer
vo_vdpau: Move all remaining static/global variables to context
vo_vdpau: Move things to context struct
vo_vdpau: Make info struct const
vo_vdpau: Replace global function table with context variable
vo_vdpau: Move VDPAU interface pointers into one struct
vo_vdpau: Add template file for VDPAU functions
...
The GUI is badly designed and too closely coupled to the internal
details of other code. The GUI code is in bad shape and unmaintained
for years. There is no indication that anyone would maintain it in the
future either. Even if someone did volunteer to implement a better
integrated GUI having the current code in the tree probably wouldn't
help much. So get rid of it.
Many VOs kept track of pause status, but reset the value when their
config() function was called. However it can be called while playback
stays in pause mode. Modify the VOs to not change anything in
config(). Also send the VO either VOCTRL_PAUSE or VOCTRL_RESUME when
the playback of a new file is starting to make sure they have the
right status.
Convert vo_x11_border (used in vo_gl/gl2 though the vo_gl_border
macro) to use a wrapper macro in old-style VOs which do not provide a
VO object argument. Before this function had an explicit global_vo
argument in vo_gl/gl2. New vo_vdpau uses it too so use the same
mechanism as most other functions.
which part of the video source must be scaled onto which part of the window.
Direct3D and (future) VDPAU need this, for XvMC it makes it easier to add
cropping support and Xv is changed to keep the diff to XvMC small.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@28546 b3059339-0415-0410-9bf9-f77b7e298cf2
The libdvdread4 and libdvdnav directories, which are externals in the
svn repository, are at least for now not included in any form. I added
configure checks to automatically disable internal libdvdread and
libdvdnav if the corresponding directories are not present; if they're
added manually then things work the same as in svn.
If the main image buffer was not altered for OSD then allow updating
OSD even if no separate OSD-less copy was made. The code now makes a
copy at that time (another possibility would be to not make a copy and
disallow further updates).
When OSD contents change while paused, try to change the OSD drawn in
the currently visible frame. If such OSD updates are not supported
then advance by one frame and draw the OSD normally. Add some support
for OSD redrawing to vo xv.
The new xv code makes a copy of the original frame contents before
drawing the OSD if MPlayer is already paused when the frame is drawn.
If such a copy of the current frame exists then the frame contents can
be restored and a different OSD drawn on top of the same frame.
It is useless because with the new API enabled by VOCTRL_UPDATE_SCREENINFO it
is not necessary because it is already done in video_out.c:config_video_out.
Secondly, the removal of the aspect_save_prescale triggered a regression because of
it, with -wid the window would not be filled completely initially.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@27978 b3059339-0415-0410-9bf9-f77b7e298cf2
Uoti Urpala
wm4
iive
Clément Bœsch
Uoti Urpala
reimar
Anton Khirnov
Amar Takhar
diego
cehoyos