This removes all GPL only code from it, and that's the whole purpose.
Also happens to be much simpler.
The "deinterlace" option still sort of exists, but only as runtime
changeable option. The main change in behavior is that the property will
not report back the actual deint state. Or in other words, if inserting
or initializing the filter fails, the deinterlace property will still
return "yes". This is in line with most recent behavior changes to
properties and options.
This replaces `vo-performance` by `vo-passes`, bringing with it a number
of changes and improvements:
1. mpv users can now introspect the vo_opengl passes, which is something
that has been requested multiple times.
2. performance data is now measured per-pass, which helps both
development and debugging.
3. since adding more passes is cheap, we can now report information for
more passes (e.g. the blit pass, and the osd pass). Note: we also
switch to nanosecond scale, to be able to measure these passes
better.
4. `--user-shaders` authors can now describe their own passes, helping
users both identify which user shaders are active at any given time
as well as helping shader authors identify performance issues.
5. the timing data per pass is now exported as a full list of samples,
so projects like Argon-/mpv-stats can immediately read out all of the
samples and render a graph without having to manually poll this
option constantly.
Due to gl_timer's design being complicated (directly reading performance
data would block, so we delay the actual read-back until the next _start
command), it's vital not to conflate different passes that might be
doing different things from one frame to another. To accomplish this,
the actual timers are stored as part of the gl_shader_cache's sc_entry,
which makes them unique for that exact shader.
Starting and stopping the time measurement is easy to unify with the
gl_sc architecture, because the existing API already relies on a
"generate, render, reset" flow, so we can just put timer_start and
timer_stop in sc_generate and sc_reset, respectively.
The ugliest thing about this code is that due to the need to keep pass
information relatively stable in between frames, we need to distinguish
between "new" and "redrawn" frames, which bloats the code somewhat and
also feels hacky and vo_opengl-specific. (But then again, this entire
thing is vo_opengl-specific)
This introduces (yet another..) mp_colorspace members, an enum `light`
(for lack of a better name) which basically tells us whether we're
dealing with scene-referred or display-referred light, but also a bit
more metadata (in which way is the scene-referred light expected to be
mapped to the display?).
The addition of this parameter accomplishes two goals:
1. Allows us to actually support HLG more-or-less correctly[1]
2. Allows people playing back direct “camera” content (e.g. v-log or
s-log2) to treat it as scene-referred instead of display-referred
[1] Even better would be to use the display-referred OOTF instead of the
idealized OOTF, but this would require either native HLG support in
LittleCMS (unlikely) or more communication between lcms.c and
video_shaders.c than I'm remotely comfortable with
That being said, in principle we could switch our usage of the BT.1886
EOTF to the BT.709 OETF instead and treat BT.709 content as being
scene-referred under application of the 709+1886 OOTF; which moves that
particular conversion from the 3dlut to the shader code; but also allows
a) users like UliZappe to turn it off and b) supporting the full HLG
OOTF in the same framework. But I think I prefer things as they are
right now.
List of changes:
1. Kill nom_peak, since it's a pointless non-field that stores nothing
of value and is _always_ derived from ref_white anyway.
2. Kill ref_white/--target-brightness, because the only case it really
existed for (PQ) actually doesn't need to be this general: According
to ITU-R BT.2100, PQ *always* assumes a reference monitor with a
white point of 100 cd/m².
3. Improve documentation and comments surrounding this stuff.
4. Clean up some of the code in general. Move stuff where it belongs.
Before this, options with co->data==NULL (i.e. no storage) were not
added to the bridge (except alias options). There are a few options
which might make sense to allow via the bridge ("profile" and
"include"). So allow them.
In command_init(), we merely remove the co->data check, the rest of the
diff is due to switching the if/else branches for convenience.
We also must explicitly error on M_PROPERTY_GET if co->data==NULL. All
other cases check it in some way.
Explicitly exclude options from the property bridge, which would be
added due this, and the result would be pointless.
And also change input.conf to make all screenshots async. (Except the
every-frame mode, which always uses synchronous mode and ignores the
flag.) By default, the "screenshot" command is still asynchronous,
because scripts etc. might depend on this behavior.
This is only partially async. The code for determining the filename is
still always run synchronously. Only encoding the screenshot and writing
it to disk is asynchronous. We explicitly document the exact behavior as
undefined, so it can be changed any time.
Some of this is a bit messy, because I wanted to avoid duplicating the
message display code between sync and async mode. In async mode, this is
called from a worker thread, which is not safe because showing a message
accesses the thread-unsafe OSD code. So the core has to be locked during
this, which implies accessing the core and all that. So the code has
weird locking calls, and we need to do core destruction in a more
"controlled" manner (thus the outstanding_async field).
(What I'd really want would be the OSD simply showing log messages
instead.)
This is pretty untested, so expect bugs.
Fixes#4250.
Obviously, this has no effect on commands which do not support this
explicitly. A later commit will enable this for screenshots.
Also add some wording on mpv_command_async(), which has nothing to do
with this. Having a more elegant, unified behavior would be nice. But
the API function was not created for this - it's merely for running
commands _synchronously_ on the core, but without blocking the client
API caller (if the API user consistently uses only async functions).
"@name:!" becomes simply "@name". This is actually slightly more complex
to parse, but makes for a much simpler syntax and will be less weird to
the user. Suggested by haasn.
The old syntax is now rejected with an error.
Also add some more explicit error checks, instead of e.g. allowing empty
filter names and erroring only when it's not found.
It should default to true, but setting the filter list via mpv_node
(relevant for client API and Lua scripting) left it to false.
Also "document" the flag.
Basically, see the example in input.rst.
This is better than the "old" vf-toggle method, because it doesn't
require the user to duplicate the filter string in mpv.conf and
input.conf.
Some aspects of this changes are untested, so enjoy your alpha testing.
Requested. The property semantics are a bit muddy due to lack of effort.
Anticipated use is different display of cache status, so it should not
matter anyway.
This was excessively useless, and I want my time back that was needed to
explain users why they don't want to use it.
It captured the byte stream only, and even for types of streams it was
designed for (like transport streams), it was rather questionable.
As part of the removal, un-inline demux_run_on_thread() (which has only
1 call-site now), and sort of reimplement --stream-dump to write the
data directly instead of using the removed capture code.
(--stream-dump is also very useless, and I struggled coming up with an
explanation for it in the manpage.)
"drop-frame-count" -> "decoder-frame-drop-count"
"vo-drop-frame-count" -> "frame-drop-count"
This gets rid of the backwards "drop-frame" part in the name.
Maybe calling the new property "frame-drops" would be better, but there
are already a bunch of similar properties that end in "-count".
Introduce the --opengl-hwdec-interop option, which replaces
--hwdec-preload. The new option allows explicit selection of the interop
backend.
This is relatively complex, and I would have preferred not to add this,
but it's probably useful to debug certain problems. In exchange, the
"new" option documents that pretty much any but the simplest use of it
will not be forward compatible.
As threatened by the API changes document.
We can actually keep the deprecated --playlist-pos and --cache options,
since they are aliases and not used by the corresponding properties.
They are inconsistent, but do no harm. Keep them for now for the sake of
the command line user.
mpv_identify.sh partially stopped working, because it was never updated.
The shell magic can't deal with property names that contain "/", so we
can't replace "samplerate" with "audio-params/samplerate" - just remove
these properties. (How about you use ffprobe?)
Use the device name as fallback. This is ugly, but still better than
skipping the description entirely. This can be an issue on ALSA, where
the API can return entries without proper description.
"seek -10 absolute" will seek to 10 seconds before the end. This more or less
matches the --start option and negative seeks were otherwise useless (they just
clipped to 0).
This should make display-names usable on Windows. It returns a list of
GDI monitor names like "\\.\DISPLAY1". Since it may be useful to get the
monitor that Windows considers associated with the window (with
MonitorFromWindow,) this will always be returned as the first argument.
This monitor is the one used for display-fps and icc-profile-auto.
The intention is to give libmpv users as much flexibility to load
scripts as using mpv from CLI, but without restricting libmpv users from
having to decide everything on creation time, or having to go through
hacks like recreating the libmpv context to update state.
This is the actual decoder output, with no overrides applied. (Maybe
video-params shouldn't contain the overrides in the first place, but
damage done.)
For audio files, this is identical to time-pos (except read-only).
For audio-video files, this returns the audio position. Unlike
time-pos, this is not quantized to a video frame.
For video-only files, this property is unavailable.
Some properties had a different type from their equivalent options (such
as mute, volume, deinterlace, edition). This wasn't really sane, as raw
option values should be always within their bounds. On the other hand,
these properties use a different type to reflect runtime limits (such as
range of available editions), or simply to improve the "UI" (you don't
want to cycle throuhg the completely useless "auto" value when cycling
the "mute" property).
Handle this by making them always return the option type, but also
allowing them to provide a "constricted" type, which is used for UI
purposes. All M_PROPERTY_GET_CONSTRICTED_TYPE changes are related to
this.
One consequence is that you can set the volume property to arbitrary
high values just like with the --volume option, but using the "add"
command it still restricts it to the --volume-max range.
Also deprecate --chapter, as it is grossly incompatible to the chapter
property. We pondered renaming it to --chapters, or introducing a more
powerful --range option, but concluded that --start --end is actually
enough.
These changes appear to take care of the last gross property/option
incompatibilities, although there might still be a few lurking.
For some odd reason, value ranges for the window-scale option and
property are different, and the property has a more narrow range. Change
it to the option range.
Also store the window-scale value into the option value when setting the
property, so it will be persistent if the window is closed and reopened.
Conflicts with the "playlist-pos" property. They're really a bit too
different, and since the --playlist-pos option is relatively new and
obscure, just rename it to get this out of the way.
All option write accesses are now put through the property interface,
which means runtime option value verification and runtime updates are
applied. This is done even for command line arguments and config files.
This has many subtle and not-so-subtle consequences. The potential for
unintended and intended subtle or not-subtle behavior changes is very
large.
Architecturally, this is us literally jumping through hoops. It really
should work the other way around, with options being able to have
callbacks for value verification and applying runtime updates. But this
would require rewriting the entirety of command.c. This change is more
practical, and if anything will at least allow incremental changes.
Some options are too incompatible for this to work - these are excluded
with an explicit blacklist.
This change fixes many issues caused by the mismatch between properties
and options. For example, this fixes#3281.
With the recent vo_opengl changes it doesn't do anything anymore.
I don't think a deprecation period is necessary, because the command
was always marked as experimental.
The --cache option and cache property conflict, so one of them has to be
renamed. The option is probably used frequently, so initiate
deprecation/rename of the property.
Make some existing properties behave more like options. This mostly
means they don't deny access if the associated component is not active,
but redirects to the option.
One kind of fishy change is that we apply --brightness etc. only if
they're not set to the default value. This won't necessarily work with
--vo=xv, but affects only cases where 1. the Xv adapter has been changed
to non-defaults, and 2. the user tries to reset them with mpv by passing
e.g. --brightness=0. We don't care about Xv, and the noted use-case is
dumb, so this change is acceptable.
These conflict with options of the same name, and prevent a "full"
unification. Not addressed is the "cache" property, and possibly a few
properties that behave differently from their equivalent options.
Now options are accessible through the property list as well, which
unifies them to a degree.
Not all options support runtime changes (meaning affected components
need to be restarted for the options to take effects). Remove from the
manpage those properties which are cleanly mapped to options anyway.
From the user-perspective they're just options available through the
property interface.
mixer.c didn't really deserve to be separate anymore, as half of its
contents were unnecessary glue code after recent changes. It also
created a weird split between audio.c and af.c due to the fact that
mixer.c could insert audio filters. With the code being in audio.c
directly, together with other code that unserts filters during runtime,
it will be possible to cleanup this code a bit and make it work like the
video filter code.
As part of this change, make the balance code work like the volume code,
and add an option to back the current balance value. Also, since the
balance semantics are unexpected for most users (panning between the
audio channels, instead of just changing the relative volume), and there
are some other volumes, formally deprecate both the old property and the
new option.
Old-style commands using _ as separator (e.g. show_progress) were still
used in some places, including documentation and configuration files.
This commit updates all such instances to the new style (show-progress)
so that commands are easier to find in the manual.
Since it turns out that knowing what exactly a file was tagged with can
be useful for debugging purposes, expose this as a property so I can
check it more easily.
This is mostly useful for sig-peak (since nom-peak is currently entirely
calculated by us), but I added both for consistency.
Drop the code for switching the volume options and properties between
af_volume and AO volume controls. interface-changes.rst mentions the
changes in detail.
Do this because this was exceedingly complex and had other problems as
well. It was also very hard to test. It's just not worth the trouble.
Some leftovers like AOCONTROL_HAS_PER_APP_VOLUME will be removed at a
later point.
Fixes#3322.
Working towards refcounted sub images, and also for removing bitmap
packers from VOs.
I'm not sure why we even have this overlay-add command. It was sort of
"needed" before opengl-cb was introduced, and before Lua scripts could
put ASS drawings on OSD without conflicting with the OSC. But now trying
to use it doesn't make too much sense anymore.
Still keep it because we're trying to be nice, but throw performance out
of the window. Now image data is copied 2 more times before displaying
it. This also makes using the command a bit simpler.
Instead of having 9 different properties, requiring 18 different
VOCTRLs to read them all, they are now exposed as a single property.
This is not only cleaner (since they're all together) but also allows
querying all 9 of them with only a single VOCTRL (by using
mp.get_property_native).
(The extra factor of 2 was due to an extra query being needed to get the
type, which is now also unnecessary)
This makes it much easier to access performance metrics from within a
lua script, and also makes it easier to just show a readable, formatted
version via show-text.
This is plumbed through a new VOCTRL, VOCTRL_PERFORMANCE_DATA, and
exposed as properties render-time-last, render-time-avg etc.
All of these numbers are in microseconds, which gives a good precision
range when just outputting them via show-text. (Lua scripts can
obviously still do their own formatting etc.)
Signed-off-by: wm4 <wm4@nowhere>
This has often been requested for use on OSD. I don't really like having
such "special" properties, but whatever. Hopefully this will be the only
case.
Untested because I'm too damn lazy.
Fixes#2828.
Add --taskbar-progress command line option and property which controls taskbar
progress indication rendering in Windows 7+. This option is on by default and
can be toggled during playback.
This option does not affect the creation process of ITaskbarList3. When the
option is turned off the progress bar is just hidden with TBPF_NOPROGRESS.
Closes#2535
Introduce hwdec-current and hwdec-interop properties.
Deprecate hwdec-detected, which never made a lot of sense, and which is
replaced by the new properties. hwdec-active also becomes useless, as
hwdec-current is a superset, so it's deprecated too (for now).
Commit 382bafcb changed the behavior for ab-loop-a. This commit changes
ab-loop-b so that the behavior is symmetric.
Adjust the OSD rendering accordingly to the two changes.
Also fix mentions of the "ab_loop" command to the now preferred
"ab-loop".
Should reflect I/O speed.
This could go into the terminal status line. But I'm not sure how to put
it there, since it already uses too much space, so it's not there yet.
Changing the byte stream position without cooperation of the demuxer
seems a bit insane, and is certainly useless. A user should do factor
seeks instead. For formats like ts, this will actually translate to byte
seeks, while treating the rest of the playback chain a bit more
gracefully. With this argument, remove write access to this property.
If someone really complains, proper byte seeks could be added as seek
mode (although I'm going to need a convincing argument for this).
Read access changes too, but in a more subtle way.
Was only available via --vd=help and --ad=help (i.e. not at all via
client API). Not bothering with separating audio and video codecs, since
this list isn't all that useful anyway in general. If someone complains,
a type field could be added.
Export a number of container fields, which may or may not be useful in
some scenarios. They are explicitly marked as originating from the
demuxer, in order to make it explicit that they might be unreliable.
I'd actually like to remove all other cases where container information
is exported, but those numerous cases are going to be somewhat hard to
deprecate.
Also, not directly related, export the description of the currently
active decoder. (This has been requested before.)
This seems generally easier when using libmpv (and was already requested
and implemented before: see commit 327a779a; it was reverted some time
later).
With the weird internal logic we have to deal with, in particular the
--softvol=no case (using system volume), and using the audio API's mixer
(--softvol=auto on some systems), we still can't avoid all glitches and
corner cases that complicate this issue so much. The API user is either
recommended to use --softvol=yes or auto, or to watch the new
mixer-active property, and assume the volume/mute properties have
significant values if the mixer is active.
Remaining glitches:
- changing the volume/mute properties has no effect if no internal mixer
is used (--softvol=no) and the mixer is not active; the actual mixer
controls do not change, only the property values
- --volume/--mute do not have an effect on the volume/mute properties
before mixer initialization (the options strictly are only applied
during mixer init)
- volume-max is 100 while the mixer is not active
The "script-binding" command is used by the Lua scripting wrapper to
register key bindings on the fly. It's also the only way to get fine-
grained information about key events (such as separate key up/down
events). This information is sent via a "key-binding" message when the
state of a key changes.
Extend it to send name of the mapped key itself. Previously, it was
assumed that the user just uses an unique identifier for the binding's
name, so it wasn't needed. With this change, a user can map exactly the
same command to multiple keys, which is useful especially with the next
commit.
Part of #2612.
This is simply the average refresh rate. Including "bad" samples is
actually an advantage, because the property exists only for
informational purposes, and will reflect problems such as the driver
skipping a vsync.
Also export the standard deviation of the vsync frame duration
(normalized to the range 0-1) as vsync-jitter property.
Most of this is explained in the DOCS additions.
This gives us slightly more sanity, because there is less interaction
between the various parts. The goal is getting rid of the video_offset
entirely.
The simplification extends to the user API. In particular, we don't need
to fix missing parts in the API, such as the lack for a seek command
that seeks relatively to the start time. All these things are now
transparent.
(If someone really wants to know the real timestamps/start time, new
properties would have to be added.)
This is very "illustrative", unlike the video-speed-correction
property, and thus useful. It can also be used to observe scheduling
errors, which are not detected by the core. (These happen due to
rounding errors; possibly not evne our fault, but coming from
files with rounded timestamps and so on.)
"Missed" implies the frame was dropped, but what really happens is that
the following frame will be shown later than intended (due to the
current frame skipping a vsync).
(As of this commit, this property is still inactive and always
returns 0. See git blame for details.)
Has the same function as setting the option.
This commit changes the property in a bunch of other ways. For example
if the VO is not created, it will return the option value.
Useless. Sometimes it might be useful to make some extremely broken
files work, but on the other hand --no-correct-pts is sufficient for
these cases.
While we still need some of the code for AVI, the "auto" mode in
particular inflated the size of the code.
The vf_format suboption is replaced with --video-output-levels (a global
option and property). In particular, the parameter is removed from
mp_image_params. The mechanism is moved to the "video equalizer", which
also handles common video output customization like brightness and
contrast controls.
The new code is slightly cleaner, and the top-level option is slightly
more user-friendly than as vf_format sub-option.
This causes weirdness with the "cache-size" property and option. Only
the read handler of the property included the backbuffer, while all
others did not. Make it consistent, and subtract the backbuffer size
from the cache size.
Fixes#2305.
Provides a simplistic way to seek without having to care about weird
situations like timestamp vs. playback time. This is good, because the
seek command is currently timestamp based, so when using the seek
command the user _does_ have to care.
If this mode is enabled, the player tries to strictly synchronize video
to display refresh. It will adjust playback speed to match the display,
so if you play 23.976 fps video on a 24 Hz screen, playback speed is
increased by approximately 1/1000. Audio wll be resampled to keep up
with playback.
This is different from the default sync mode, which will sync video to
audio, with the consequence that video might skip or repeat a frame once
in a while to make video keep up with audio.
This is still unpolished. There are some major problems as well; in
particular, mkv VFR files won't work well. The reason is that Matroska
is terrible and rounds timestamps to milliseconds. This makes it rather
hard to guess the framerate of a section of video that is playing. We
could probably fix this by just accepting jittery timestamps (instead
of explicitly disabling the sync code in this case), but I'm not ready
to accept such a solution yet.
Another issue is that we are extremely reliant on OS video and audio
APIs working in an expected manner, which of course is not too often
the case. Consequently, the new sync mode is a bit fragile.
For video sync, we want separate playback speed controls for user-
requested speed and the "correction" speed for video timing. Further, we
use this separation to make sure only a resampler is inserted if
playback speed is only changed for video sync correction.
As of this commit, this is basically inactive code. It's just
preparation for the video sync code (the following commit).
Removes some more internal API calls from the Lua scripting backend.
Which is good, because ideally the scripting backend would use libmpv
functions only.
One awkwardness is that mouse sections are still not supported by the
public commands (and probably will never), so flags like allow-hide-
cursor make no sense to an outside user.
Also, the way flags are passed to the Lua function changes. But that's
ok, because they're only undocumented internal functions, and not
supposed to be used by script users. osc.lua only does due to historical
reasons.
This was requested. It was more or less present internally already and
used for Lua scripting. Lua will switch to the "public" functions in
the following commits.
Nobody wanted to restore this, so it gets the boot.
If anyone still wants to volunteer to restore menu support, this would
be welcome. (I might even try it myself if I feel masochistic and like
wasting a lot of time for nothing.) But if it does get restored, it
should be done differently. There were many stupid things about how it
was done. For example, it somehow tried to pull mp_nav_events through
all the layers (including needing to "buffer" them in the demuxer),
which was needlessly complicated. It could be done simpler.
This code was already inactive, so this commit actually changes nothing.
Also keep in mind that normal DVD/BD playback still works.
At least Matroska files have a "forced" flag (in addition to the
"default" flag). Export this flag. Treat it almost like the default
flag, but with slightly higher priority.
This command has been deprecated in the 0.8.x and 0.9.x releases - get
rid of it. Its only point ever was MPlayer compatibility, which broke
years ago anyway.
Wnile it seems quite logical to me that commands use _ as word
separator, while properties use -, I can't really explain the
difference, and it tends to confuse users as well. So always
prefer - as separator for everything.
Using _ still works, and will probably forever. Not doing so would
probably create too much chaos and confusion.
Also replace their implementation with the recently introduced
properties. One significant difference is that audio-channels using OSD
formatting does not print the channel layout. The user can just use the
replacement property instead.
Now --volume takes an absolute volume, meaning it doesn't depend on
--softvol-max. 0 is still silence, and 100 now always means unchanged
volume. The OSD and the "volume" property are changed accordingly.
Also raise the minimum value of --softvol-max. A value below 100 makes
no sense and breaks the OSD.
Only absolute percentage seeking was permitted first. It is now also
possible to seek by relative percentage.
MPSEEK_FACTOR is used as seek_type.
Fixes#1950.
Signed-off-by: wm4 <wm4@nowhere>
Now the rescan_external_files command will by default reselect the audio
and subtitle streams. This should be more intuitive.
Client API users and Lua scripts might break, but can be fixed in a
backward-compatible way by setting the mode explicitly.
Approximate time of video buffered in the demuxer, in seconds. Same as
`demuxer-cache-duration` but returns the last timestamp of bufferred
data in demuxer.
Signed-off-by: wm4 <wm4@nowhere>
Remove the old implementation for these properties. It was never very
good, often returned very innaccurate values or just 0, and was static
even if the source was variable bitrate. Replace it with the
implementation of "packet-video-bitrate". Mark the "packet-..."
properties as deprecated. (The effective difference is different
formatting, and returning the raw value in bits instead of kilobits.)
Also extend the documentation a little.
It appears at least some decoders (sipr?) need the
AVCodecContext.bit_rate field set, so this one is still passed through.
The old behavior does not make too much sense after all. If you don't
want to file to be overwritten, the user can check this manually.
This is a change in behavior - let's hope nobody actually relied on it.
Requested change in behavior.
Note that we set the assumed "infinite" display_fps to 1e6, which
conveniently lets vo_get_vsync_interval() return a dummy value of 1,
which can be easily checked against, and still avoids doing math with
float INFs.
This gets rid of the need for a second (or more) parameters; instead it
can be all in one parameter. The (now) redundant parameter is still
parsed for compatibility, though.
The way the flags make each other conflict is a bit tricky: they have
overlapping bits, and the option parser disallows setting already set
bits.
Now --ass-use-margins doesn't apply to normal subtitles anymore. This is
probably the inverse from the mpv behavior users expected so far, and
thus a breaking change, so rename the option, that the user at least has
a chance to lookup the option and decide whether the new behavior is
wanted or not.
The basic idea here is:
- plain text subtitles should have a certain useful defalt behavior,
like actually using margins
- ASS subtitles should never be broken by default
- ASS subtitles should look and behave like plaintext subtitles if
the --ass-style-override=force option is used
This also subtly changes --sub-scale-with-window and adds the --ass-
scale-with-window option. Since this one isn't so important, don't
bother with compatibility.
Not very important for the command line player; but GUI applications
will want to know about this.
This only adds the internal API; support for specific audio outputs
comes later.
This reuses the ao struct as context for the hotplug event listener,
similar to how the "old" device listing API did. This is probably a bit
unclean and confusing. One argument got reusing it is that otherwise
rewriting parts of ao_pulse would be required (because the PulseAudio
API requires so damn much boilerplate). Another is that --ao-defaults is
applied to the hotplug dummy ao struct, which automatically applies such
defaults even to the hotplug context.
Notification works through the property observation mechanism in the
client API. The notification chain is a bit complicated: the AO notifies
the player, which in turn notifies the clients, which in turn will
actually retrieve the device list. (It still has the advantage that it's
slightly cleaner, since the AO stuff doesn't need to know about client
API issues.)
The weird handling of atomic flags in ao.c is because we still don't
require real atomics from the compiler. Otherwise we'd just use atomic
bitwise operations.
This shouldn't exist and for the most part is meant to be used by the
ytdl Lua script, but let's document it anyway. Since the Lua API handles
all the details, it's considered much more "stable" than the raw API,
which is why the raw API wasn't documented.
These commands are counterparts of sub_add/sub_remove/sub_reload which
work for external audio file.
Signed-off-by: wm4 <wm4@nowhere>
(minor simplification)
This is somewhat imperfect, because detection of hw decoding APIs is
mostly done on demand, and often avoided if not necessary. (For example,
we know very well that there are no hw decoders for certain codecs.)
This also requires every hwdec backend to identify itself (see hwdec.h
changes).
If a file is unseekable (consider e.g. a http server without resume
functionality), but the stream cache is active, the player will enable
seeking anyway. Until know, client API user couldn't know that this
happens, and it has implications on how well seeking will work. So add a
property which exports whether this situation applies.
Fixes#1522.
New command `mouse <x> <y> [<button> [single|double]]` is introduced.
This will update mouse position with given coordinate (`<x>`, `<y>`),
and additionally, send single-click or double-click event if `<button>`
is given.
Repurpose demuxer->filetype for this. It used to be used to print a
human readable format description; change it to a symbolic format name
and export it as property.
Unfortunately, libavformat has its own weird conventions, which are
reflected through the new property, e.g. the .mp4 case mentioned in the
manpage.
Fixes#1504.
The "\\" escape was rendered as "\" on the website. I'm hoping quoting
this in ``...`` will render it correctly.
Also add an example for show_text, which awkwardly does not require
escaping the "\".
Make their meaning more exact, and don't pretend that there's a
reasonable definition for "bits-per-pixel". Also make unset fields
unavailable.
average_depth still might be inconsistent: for example, 10 bit 4:2:0 is
identified as 24 bits, but RGB 4:4:4 as 12 bits. So YUV formats
seemingly drop the per-component padding, while RGB formats do not.
Internally it's consistent though: 10 bit YUV components are read as
16 bit, and the padding must be 0 (it's basically like an odd fixed-
point representation, rather than a bitfield).
bpp(bits-per-pixel) and depth(bit-depth for color component) can
be calculated from pixelformat technically but it requires massive
informations to be implemented in client side.
These subproperties are provided for convenience.
Do so by using mp_subprocess(). Although this uses completely different
code on Unix too, you shouldn't notice a difference. A less ncie thing
is that this reserves an entire thread while the command is running
(which wastes some memory for stack, at least). But this is probably
still the simplest way, and the fork() trick is apparently not
implementable with posix_subprocess().
Essentially, don't make it the mmap() argument, and just add it to the
memory address. This hides tricky things like alignment reequirements
from the user.
Strictly speaking, this is not entirely backwards compatible: this adds
the regression that you can't access past 2 or 4 GB of a file on 32 bit
systems anymore. But I doubt anyone cared about this.
In theory, we could be clever, and just align the offset manually and
pass that to mmap(). This would also be transparent to the user, but
minimally more effort, so this is left as exercise to the reader.
Makes all of overlay_add work on windows/mingw.
Since we now don't explicitly check for mmap() anymore (it's always
present), this also requires us to make af_export.c compile, but I
haven't tested it.
This was requested.
It seems libdvdread can't get the duration for titlesets other than the
currently opened title. The data structures contain dangling pointers
for these, and MPlayer works this around by opening every title
separately for the purpose of dumping the title list.
By now, input.conf is actually just a small part of input handling.
Rename the section to something else ("command interface" was the
first reasonable thing that came to mind).
Also fix a minor typo further down.
The fact that it's a generic command prefix that is parsed even when
using the client API is a bit unclean (because this flag makes sense
for actual key-bindings only), but it's less code this way.
This command was actually requested on IRC ages ago, but I forgot about
it.
The main purpose is that the decoding state can be reset without issuing
a seek, in particular in situations where you can't seek.
This restarts decoding from the middle of the packet stream; since it
discards the packet buffer intentionally, and the decoder will typically
not output "incomplete" frames until it has recovered, it can skip a
large amount of data.
It doesn't clear the byte stream cache - I'm not sure if it should.
Probably needs to be polished a bit more. Also, might require a key
binding that can set/clear the loop points in a more intuitive way.
For now, something like this can be put into input.conf to use it:
ctrl+y set ab-loop-a ${time-pos} # set A
ctrl+x set ab-loop-b ${time-pos} # set B
ctrl+c set ab-loop-a no # clear (mostly)
Fixes#1241.
Due to the current code structure, the "current" entry and the entry
which is playing can be different. This is probably silly, but still
try to mark the entries correctly.
Refs #1260.
This actually doesn't even write/return the new sub-property, because
I dislike the idea of dumping that field for every single playlist
entry, even though it's "needed" only for one.
Fixes#1260.
This might be interesting for GUIs and such.
It's probably still a little bit insufficient. For example, the filter
and audio/video output lists are not available through this.
Call VOCTRL_GET_DISPLAY_NAMES it when the property is
requested. The vo should return the names of the displays that the mpv
window is covering. For example, with x11 vos, xrandr names LVDS1,
HDMI1, etc.
No development activity (or even any sign of life) for almost a year.
A replacement based on youtube-dl will probably be provided before the
next mpv release. Ask on the IRC channel if you want to test.
Simplify the Lua check too: libquvi linking against a different Lua
version than mpv was a frequent issue, but with libquvi gone, no
direct dependency uses Lua, and such a clash is rather unlikely.
So a client API user can know when a window is created or destroyed.
Also might be useful for the OSC: it could disable itself if video is
disabled.
Before this commit, there were only indirect ways of detecting this.
The behavior of reverse cycling (with the "!reverse" magic value) was a
bit weird and acted with a "delay". This was because the command set the
value the _next_ command should use. Change this and make each command
invocation select and use the next command directly. This requires an
"uninitialized" special index in the counter, but that is no problem at
all.
Allows properly changing/updating the cursor state. Useful for client
API window embedding, because the host application may not want the mpv
window to grab mouse input, and this has to manually handle the cursor.
Changing the cursor of foreign windows is usually not sane.
It might make sense to allow changing the cursor icon, but that would be
much more complicated, so I won't add it unless someone actually
requests it.
Whether you consider the semantics weird or not depends on your use
case, but I suppose it's a bit confusing anyway. At this point, we keep
MPV_EVENT_PAUSE/UNPAUSE for compatibility only.
Make the "core-idle" property somewhat more useful in this context.
For the sake of libmpv. Might make things much easier for the user,
especially on Windows. On the other hand, it's a bit sketchy that a
command exists that makes the player access arbitrary memory regions.
(But do note that input commands are not meant to be "secure" and never
were - for example, there's the "run" command, which obviously allows
running random shell commands.)
Use percent-pos instead, which is exactly the same, except with the
range 0.0-100.0.
I'm not sure how this got there; it was probably introduced and then
removed again as percent-pos got more precise.
CC: @mpv-player/stable
We don't allow this by default, because it would be silly if random
external data (like filenames or file tags) could accidentally trigger
them.
Add a property that magically disables this ASS tag escaping.
Note that malicious input could still disable ASS tag escaping by
itself. This would be annoying but harmless.
This means they get special handling for asynchronously aborting
playback, even if the player is "stuck".
Also document "stop". It seems somewhat useful for client API users
(although that will be implemented properly only in the following
commits.)
In particular, use the note markup. The issue about rounded timestamps
is mostly with respect to Matroska (which usually rounds them to
milliseconds), which somewhat adds to the reliability issue.
This mostly uses the same idea as with vo_vdpau.c, but much simplified.
On X11, it tries to get the display framerate with XF86VM, and limits
the frequency of new video frames against it. Note that this is an old
extension, and is confirmed not to work correctly with multi-monitor
setups. But we're using it because it was already around (it is also
used by vo_vdpau).
This attempts to predict the next vsync event by using the time of the
last frame and the display FPS. Even if that goes completely wrong,
the results are still relatively good.
On other systems, or if the X11 code doesn't return a display FPS, a
framerate of 1000 is assumed. This is infinite for all practical
purposes, and means that only frames which are definitely too late are
dropped. This probably has worse results, but is still useful.
"--framedrop=yes" is basically replaced with "--framedrop=decoder". The
old framedropping mode is kept around, and should perhaps be improved.
Dropping on the decoder level is still useful if decoding itself is too
slow.
The client API exports this state via events already, but maybe it's
better to explicitly provide this property in order to facilitate use on
OSD and similar cases.
Handle --term-playing-msg at a better place.
Move MPV_EVENT_TICK hack into a separate function. Also add some words
to the client API that you shouldn't use it. (But better leave breaking
it for later.)
Handle --frames and frame_step differently. Remove the mess from the
playloop, and do it after frame display. Give up on the weird semantics
for audio-only mode (they didn't make sense anyway), and adjust the
manpage accordingly.
"loadfile filename append-play" will now always append the file to the
playlist, and if nothing is playing yet, start playback. I don't want to
change the semantics of "append" mode, so a new mode is needed.
Probably fixes issue #950.
