Form some reason (and because of my fault), vf_format converts image
formats, but nothing else. For example, setting the "colormatrix"
sub-parameter would not convert it to the new value, but instead
overwrite the metadata (basically "reinterpreting" the image data
without changing it).
Make the historical mistake worse, and go all the way and extend it such
that it can perform a conversion. For compatibility reasons, this needs
to be requested explicitly. (Maybe this would deserve a separate filter
to begin with, but things are messed up anyway. Feel free to suggest an
elegant and simple solution.)
This demonstrates how zimg can properly perform some conversions which
swscale cannot (see examples added to vf.rst).
Stupidly this requires 2 code paths, one for conversion, and one for
overriding the parameters.
Due to the filter bullshit (what was I thinking), this requires quite
some acrobatics that would not be necessary without these abstractions.
On the other hand, it'd definitely be more of a mess without it. Oh
whatever.
f_reset, which is called on seeks, was a good place for resetting the
warning flag (so the warning would be print again). Except some other
code abused f_reset when all metadata was read (in both cases you want
to clear the metadata). Instead of spending more time on getting this
flag reset correctly, just never reset it.
There's 2 stupid things here that need to be fixed. First of all,
vulkan wasn't actually using presentation time because somehow the
get_vsync function in context.c disappeared. Secondly, if the mpv window
was hidden it was updating the ust time based on the refresh_usec but
really it should simply just not feed any information to the vsync info
structure. So this adds some logic to assume whether or not a window is
hidden.
Normally, input and output are orthogonal. But zimg may gain image
formats not supported by FFmpeg, which means the conversion will only
work if zimg is used at all. This on the other hand, depends on whether
the other format is also supported by zimg. (For example, a later commit
adds RGB30 output to zimg. libswscale does not support this format. But
if you have P010 as input, which the zimg wrapper does not support at
all, the conversion won't work.)
This makes such a function needed; so add it.
The FFmpeg version was last bumped a long time ago, except in commit
1638fa7b46, where it was used for some obscure pixel
format.
This is pretty annoying, so make it optional.
The RGB pack/unpack code in theory supports packed, non-subsampled YUV,
although in practice FFmpeg defines no such formats. (Only one with
alpha, but all alpha input is rejected by the current code.)
This would in theory have failed, because we would have selected a GBRP
format (instead of YUV), which makes no sense and would either have been
rejected by zimg (inconsistent parameters), or lead to broken output
(wrong permutation of planes).
Select the correct format and don't permute the planes in the YUV case.
As suggested by the zimg author. This is mostly related to XYZ support.
It's unclear whether this works. Using the only XYZ test sample we know,
and the next commits to consume the pixfmt, it looks wrong.
According to the zimg author, YUV->GREY conversion does not even read
the chroma planes, as long as no matrix conversion is involved. Since we
try to avoid the latter anyway by forcing the source parameters on the
target image, passing only the Y plane will not help with anything.
An unscientific test seems to confirm this, so remove this.
This would probably help with libswscale (I didn't test this), but on
the other hand, libswscale will rarely be used in cases where we can
extract the Y plane. (Except nv12, which should probably be added to the
zimg wrapper's unpacking.)
And update the comment both explaining why this defaulting matters and
why we use BT.2020 instead.
tl;dr BT.709 clips even the one test file we *do* have, so if we don't
handle XYZ "natively" in vo_gpu we might as well at least handle it in a
way that runs less risk of clipping
This no longer hard-codes BT.709, it converts to whatever primaries are
tagged in the same metadata struct. The actual BT.709 defaulting comes
from `mp_image_params_guess_csp`.
This will perform conversion and scaling of video with zimg, if
--sws-allow-zimg is used.
The performance probably depends on how well the compiler optimizes the
RGB pack code in zimg.c, which is written in C.
Awful shit. I probably wouldn't accept this code from someone else, just
so you know.
The idea is that a sws_utils user can automatically use zimg without
large code changes. Basically, laziness. Since zimg support is still
very new, and I don't want that anything breaks just because zimg was
enabled at build time, an option needs to be set to enable it. (I have
especially especially obscure stuff in mind, which is all what
libswscale is used in mpv.)
This _still_ doesn't cause zimg to be used anywhere, because the
sws_utils user has to opt-in by setting allow_zimg. This is because some
users depend on certain libswscale features.
This provides a very similar API to sws_utils.h, which can be used to
convert and scale from one mp_image to another.
This commit adds only the code, but does not use it anywhere.
The code is quite preliminary and barely tested. It supports only a few
pixel formats, and will return failure for many others. (Unlike
libswscale, which tries to support anything that FFmpeg knows.)
zimg itself accepts only planar formats. Supporting other formats
requires manual packing/unpacking. (Compared to libswscale, the zimg API
is generally lower level, but allows for more flexibility.) Only BGR0
output was actually tested. It appears to work.
This used to be needed for the "GPU memcpy" (shitty Intel methods to
deal with certain uncached memory types). This is now done in FFmpeg,
and the code in mp_image.c was just unnecessarily convoluted.
The plane pointer checking assert() triggered at least on gray8, because
that has a "pseudo palettes" in ffmpeg, which mpv refuses to allocate.
Remove a strange duplicated printf().
Log the component type where available.
(Why is this even here, I hate it when there are commented test programs
in source files.)
This was obviously missing from the recent commit, which probably broke
10 bit decoding. The original commit didn't test this for lack of
working hardware; this commit isn't tested either.
Fixes: a1c7d61393
This was speculatively added 2 years ago in preparation for something
that apparently never happened. The D3D code was added as an "example",
but this too was never used/finished.
No reason to keep this.
This syscall avoids the need to guess an unused filename in /dev/shm and
allows seals to be placed on it. We immediately return if no fd got
returned, as there isn’t anything we can do otherwise.
Seals especially allow the compositor to drop the SIGBUS protections,
since the kernel promises the fd won’t ever shrink.
This removes support for any platform but Linux from this vo.
vo_wayland was removed during the wayland rewrite done in 0.28. However,
it is still useful for systems that do not have OpenGL.
The new wayland_common code makes vo_wayland much simpler, and
eliminates many of the issues the previous vo_wayland had.
With the previous commit, this is dead code.
This also makes the f_autoconvert.c code for this dead code
(fortunately). Will probably remove this later.
2 years ago, ANGLE removed the old NV12-specific extension, and added
a new one that supports a number of formats, including P010. Actually
they just renamed it and removed their initial annoying and obvious
design error (bravo, Google).
Since it broke 2 years ago, nobody should give a shit about this code,
and it should just be removed. But for some reason I still dived the
shit-tank (Windows development).
I guess Intel code monkeys can't write drivers (or maybe the issue is
because we're doing zero-copy, which probably maybe is not actually
allowed by D3D11 due to array textures, see --d3d11va-zero-copy), so
the P010 path is completely untested. It doesn't work, I'll delete all
this ANGLE hwdec code.
Fixes: #7054
Query information on the system output most linked to the swap chain,
and either utilize a user-configured format, or either 8bit
RGBA or 10bit RGB with 2bit alpha depending on the system output's
bit depth.
The old way of using wayland in mpv relied on an external renderloop for
semi-accurate timings. This had multiple issues though. Display sync
would break whenever the window was hidden (since the frame callback
stopped being executed) which was really annoying. Also the entire
external renderloop logic was kind of fragile and didn't play well with
mpv's internal structure (i.e. using presentation time in that old
paradigm breaks stats.lua).
Basically the problem is that swap buffers blocks on wayland which is
crap whenever you hide the mpv window since it looks up the entire
player. So you have to make swap buffers not block, but this has a
different problem. Timings will be terrible if you use the unblocked
swap buffers call.
Based on some discussion in #wayland, the trick here is relatively
simple and works well enough for our purposes. Instead we basically
build a way to block with a timeout in the wayland buffer swap
functions.
A bool is set in the frame callback function that indicates whether or
not mpv is waiting for a frame to be displayed. In the actual buffer
swap function, we enter into a while loop waiting for this flag to be
set. At the same time, the wl_display is polled to block the thread and
wakeup if it receives any events from the compositor. This loop only
breaks if enough time has passed or if the frame callback bool is
received.
In the near future, it is better to set whether or not frame a frame has
been displayed in the presentation feedback. However as a first pass,
doing it in the frame callback is more than good enough.
The "downside" is that we render frames that aren't actually shown on
screen when the player is hidden (it seems like wayland people don't
like that). But who cares. Accurate timings are way more important. It's
probably not too hard to add that behavior back in the player though.
The externally driven renderloop was originally added for the wayland
context (to make display sync somewhat work), but it has a lot of issues
with mpv's internal structure. A different approach should be used.
This reverts commit a743fef837.
This affects hwdec_dxva2dxgi, which uses ra_d3d11_wrap_tex to wrap RGB
video frames that are shared with a D3D9 device. Without it, mpv uses
nearest instead of bilinear scaling with --scale=bilinear (the default)
and --hwdec=dxva2. It's kind of hard to believe this bug has gone
unnoticed for almost two years, but that seems to have been the case.
Fixes: #7042
all the get_property_* usages were removed because in some circumstances
they can lead to deadlocks. they were replaced by accessing the vo and
mp_vo_opts structs directly, like on other vos.
additionally the mpv helper was split into a mpv and libmpv helper, to
differentiate between private and public APIs and for future changes
like a macOS vulkan context for vo=gpu.
This is the proper fix to the memory leak @wm4 pointed out. It turns out
that when you autoprobe opengl and vo_wayland_init returns false,
vo_wayland_uninit is never actually executed. So you have a leftover
pointer. The vulkan context does this correctly which was why my old,
dumb "fix" broke it.
Dumb idea. The correct thing to do is to fix the preinit and context
creation so that the uninit is correctly executed when probing fails
(and then everything gets freed).
This reverts commit defc8f359c.
wm4 mentioned that the wayland autoprobe leaked. A simple oversight in
the wayland_common code forgot to free the vo_wayland_state if
vo_wayland_init returned false.
Leaks the entire zimg state on filter deinit. Not sure what I was
thinking; with some luck, I just didn't give a shit about this case, but
most likely I was thinking the same thing as always: nothing.
dudemanguy
wm4
Niklas Haas
Emmanuel Gil Peyrot
Michael Forney
Jan Ekström
James Ross-Gowan
der richter