In ancient times, this was needed because it was not default, and many
VOs had problems with it. But it was always default in mpv, and all VOs
are required to deal with it. Also, running --fixed-vo=no is not useful
and just creates weird corner cases. Get rid of it.
These commands are counterparts of sub_add/sub_remove/sub_reload which
work for external audio file.
Signed-off-by: wm4 <wm4@nowhere>
(minor simplification)
Opening the stream and opening the demuxer are both done asynchronously,
meaning the player reacts to client API requests. They also can
potentially take a while. Thus it's better to process outstanding
property changes, so that change events are sent for properties that
were changed during opening.
mpctx->audio_delay always has the same value as opts->audio_delay. (This
was not the case a long time ago, when the audio-delay property didn't
actually write to opts->audio_delay. I think.)
This is for the ordered chapters case only. In theory this could have
resulted in initial audio, video or subs missing, although it didn't
happen in practice (because no streams were selected, thus the demuxer
thread didn't actually try to read anything). It's still better to make
this explicit.
Also, timeline_set_part() can be private to loadfile.c.
mpv needs at least an audio or video track to play something. If the
track selection is basically insufficient, the player will immediately
skip to the next file (or quit).
One slightly annoying thing might be that trying to play a subtitle file
will close the VO window, and then go to the next file immediately (so
"mpv 1.mkv 2.srt 3.mkv" would flash the video window when 2.srt is
skipped). Move the check to before the video window is possibly closed.
This is a minor cosmetic issue; one can use --force-window to avoid
closing the video window at all.
Fixes#1459.
Enable asynchronous reading for external files. This excludes subtitle
files (so it's effectively enabled for audio files only), because most
subtitle files are fully read on loading, and running a thread for them
would just cause slowdowns and increase resource usage, without having
any advantages.
In theory, an external file could provide multiple tracks from the same
demuxer, but demux_start_thread() is idempotent, so the code can be
kept simple.
Should help with playing DASH with ytdl_hook.
This attempts to increase user-friendliness by excluding useless tags.
It should be especially helpful with mp4 files, because the FFmpeg mp4
demuxer adds tons of completely useless information to the metadata.
Fixes#1403.
Until now, these options took effect only at program start. This could
be confusing when e.g. doing "mpv list.m3u --shuffle". Make them always
take effect when a playlist is loaded either via a playlist file, or
with the "loadlist" command.
The code in the demuxer etc. was changed to update all metadata/tags at
once, instead of changing each metadata field. As a consequence,
printing of the tags to the terminal was also changed to print
everything on each change.
Some users didn't like this. Add a very primitive way to avoid printing
fields with the same value again if metadata is marked as changed. This
is not always correct (could print unchanged fields anyway), but usually
works.
(In general, a rather roundabout way to reflect a changed title with ICY
streaming...)
Fixes#813 (let's call it a "policy change").
The player thinks an error happened because no audio or video was played
after finishing the file, but this obviously makes no sense with stream
dumping. (error_playing follows the client API convention that negative
values are errors.)
Ordered chapter EOF was handled as special-case of ending the last
segment. This broke --kee-open, because it set AT_END_OF_FILE in an
"inconvenient" place (after checking for --keep-open, and before the
code that exits playback if EOF is reached).
We don't actually need to handle the last segment specially. Instead, we
remain in the same segment if it ends. The normal playback logic will
recognize EOF, because the end of the segment "cuts off" the file.
Now timeline_set_from_time() never "fails", and we can remove the old
segment EOF handling code in mp_seek().
libass won't use embedded fonts, unless ass_set_fonts() (called by
mp_ass_configure_fonts()) is called. However, we call this function when
the ASS_Renderer is initialized, which is long before the .ass file is
actually loaded. (I'm not sure why it tries to keep 1 ASS_Renderer, but
it always did this.)
Fix by calling mp_ass_configure_fonts() after loading them. This also
means this function will be called multiple times - hopefully this is
harmless (it will reinit fontconfig every time, though).
While we're at it, also initialize the ASS_Renderer lazily.
Fixes#1244.
The purpose of temporarily setting stop_play was to make the audio
uninit code to explicitly drain audio if needed. This was the only way
to do it before ao_drain() was made a separate function; now we can just
do it explicitly instead.
Instead of defining a separate data structure in the core.
For some odd reason, demux_chapter exported the chapter time in
nano-seconds. Change that to the usual timestamps (rename the field
to make any code relying on this to fail compilation), and also remove
the unused chapter end time.
Note that you can't pass .cue or .edl files to it, at least not yet.
Requested in context of allowing to specify custom chapters. For that
to work well, we probably need to add some sort of chapter metadata
pseudo-demuxer.
If you played e.g. an audio-only file and something bad happened that
interrupted playback, the exit message could say "No files played".
This was awkward, so show a different message in this case.
Also overhaul how the exit status is reported in order to make this
easier. This includes things such as not reporting a playback error
when loading playlists (playlists contain no video or audio, which
was considered an error).
Not sure if I'm happy with this, but for now it seems like a slight
improvement.
This is probably what libmpv users want; and it also improves error
reporting (or we'd have to add a way to communicate such mid-playback
failures as events).
This was probably done incorrectly in cases when the currently selected
channel had no data. I'm not sure if this codepath is functional at all,
though. Maybe not.
Untested due to lack of DVB hardware.
Using magic integer values was an attempt to keep the API less verbose.
But it was probably not a good idea.
Reason 1 (restart) is not made explicit, because it is not used anymore
starting with the previous commit. For ABI compatibility, the value is
left as a hole in the enum.
Use the codepath that is normally used for DVD/BD title switching and
DVB channel switching. Removes some extra artifacts from the client API:
now MPV_EVENT_END_FILE will never be called on reloads (and neither is
MPV_EVENT_START_FILE).
No development activity (or even any sign of life) for almost a year.
A replacement based on youtube-dl will probably be provided before the
next mpv release. Ask on the IRC channel if you want to test.
Simplify the Lua check too: libquvi linking against a different Lua
version than mpv was a frequent issue, but with libquvi gone, no
direct dependency uses Lua, and such a clash is rather unlikely.
Apparently using the stream index is the best way to refer to the same
streams across multiple FFmpeg-using programs, even if the stream index
itself is rarely meaningful in any way.
For Matroska, there are some possible problems, depending how FFmpeg
actually adds streams. Normally they seem to match though.
This was probably commented as an oversight. Since the subtitle renderer
was uninitialized on reinitialization anyway, this had no negative
consequences, except a memory on exit.
A vague idea to get something similar what libquvi did.
Undocumented because it might change a lot, or even be removed. To give
an idea what it does, a Lua script could do the following:
-- type ID priority
mp.commandv("hook_add", "on_load", 0, 0)
mp.register_script_message("hook_run", function(param, param2)
-- param is "0", the user-chosen ID from the hook_add command
-- param2 is the magic value that has to be passed to finish
-- the hook
mp.resume_all()
-- do something, maybe set options that are reset on end:
mp.set_property("file-local-options/name", "value")
-- or change the URL that's being opened:
local url = mp.get_property("stream-open-filename")
mp.set_property("stream-open-filename", url .. ".png")
-- let the player (or the next script) continue
mp.commandv("hook_ack", param2)
end)
This reverts commit 45c8b97efb.
Some else complained (github issue #1163).
The feature requested in #1148 will be implemented differently in
the following commit.
Now any action that stops playback of a file (even playlist navigation)
will save the position. Normal EOF is of course excluded from this, as
well as commands that just reload the current file.
The option name is now slightly off, although you could argue what the
word "quit" means.
Fixes#1148 (or at least this is how I understood it).
Run opening the stream and opening the demuxer in a separate thread.
This should remove the last code paths in which the player can normally
get blocked on network.
When the stream is opened, the player will still react to input and so
on. Commands to abort opening can also be handled properly, instead of
using some of the old hacks in input.c. The only thing the user can
really do is aborting loading by navigating the playlist or quitting.
Whether playback abort works depends on the stream implementation; with
normal network, this will depend on what libavformat (via "interrupt"
callback) does.
Some pain is caused by DVD/BD/DVB. These want to reload the demuxer
sometimes. DVB wants it in order to discard old, inactive streams.
DVD/BD for the same reason, and also for reloading stream languages
and similar metadata. This means the stream and the demuxer have to
be loaded separately.
One minor detail is that we now need to copy all global options. This
wasn't really needed before, because the options were accessed on
opening only, but since opening is now on a separate thread, this
obviously becomes a necessity.
Also recreate ASS_Library on every file played. This means we can move
the code out of main.c as well.
Recreating the ASS_Library object has no disadvantages, because it
literally stores only the message callback, the (per-file) font
attachment as byte arrays, and the set of style overrides. Hopefully
this thing can be removed from the libass API entirely at some point.
The only reason why the player core creates the ASS_Renderer, instead
of the subtitle renderer, is because we want to cache the loaded fonts
across ordered chapter transitions, so this probably still has to stay
around for now.
Each subsystem (or similar thing) had an INITIALIZED_ flag assigned. The
main use of this was that you could pass a bitmask of these flags to
uninit_player(). Except in some situations where you wanted to
uninitialize nearly everything, this wasn't really useful. Moreover, it
was quite annoying that subsystems had most of the code in a specific
file, but the uninit code in loadfile.c (because that's where
uninit_player() was implemented).
Simplify all this. Remove the flags; e.g. instead of testing for the
INITIALIZED_AO flag, test whether mpctx->ao is set. Move uninit code
to separate functions, e.g. uninit_audio_out().
This mechanism originates from MPlayer's way of dealing with blocking
network, but it's still useful. On opening and closing, mpv waits for
network synchronously, and also some obscure commands and use-cases can
lead to such blocking. In these situations, the stream is asynchronously
forced to stop by "interrupting" it.
The old design interrupting I/O was a bit broken: polling with a
callback, instead of actively interrupting it. Change the direction of
this. There is no callback anymore, and the player calls
mp_cancel_trigger() to force the stream to return.
libavformat (via stream_lavf.c) has the old broken design, and fixing it
would require fixing libavformat, which won't happen so quickly. So we
have to keep that part. But everything above the stream layer is
prepared for a better design, and more sophisticated methods than
mp_cancel_test() could be easily introduced.
There's still one problem: commands are still run in the central
playback loop, which we assume can block on I/O in the worst case.
That's not a problem yet, because we simply mark some commands as being
able to stop playback of the current file ("quit" etc.), so input.c
could abort playback as soon as such a command is queued. But there are
also commands abort playback only conditionally, and the logic for that
is in the playback core and thus "unreachable". For example,
"playlist_next" aborts playback only if there's a next file. We don't
want it to always abort playback.
As a quite ugly hack, abort playback only if at least 2 abort commands
are queued - this pretty much happens only if the core is frozen and
doesn't react to input.
The purpose is making accessing the current playlist entry saner when
commands are executed during initialization, termination, or after
playlist navigation commands.
For example, the "playlist_remove current" command will invalidate
playlist->current - but some things still access the playlist entry even
on uninit. Until now, checking stop_play implicitly took care of it, so
it worked, but it was still messy.
Introduce the mpctx->playing field, which points to the current playlist
entry, even if the entry was removed and/or the playlist's current entry
was moved (e.g. due to playlist navigation).
Continues commit 348dfd93. Replace other places where input was manually
fetched with common code.
demux_was_interrupted() was a weird function; I'm not entirely sure
about its original purpose, but now we can just replace it with simpler
code as well. One difference is that we always look at the command
queue, rather than just when cache initialization failed. Also, instead
of discarding all but quit/playlist commands (aka abort command), run
all commands. This could possibly lead to unwanted side-effects, like
just ignoring commands that have no effect (consider pressing 'f' for
fullscreen right on start: since the window is not created yet, it would
get discarded). But playlist navigation still works as intended, and
some if not all these problems already existed before that in some
forms, so it should be ok.
Somehow, there was a larger misunderstanding in the code: ao_buffer
does not need to be preserved over audio reinit for proper support of
gapless audio. The actual AO internal buffer takes care of this.
In fact, preserving ao_buffer just breaks audio resync. In the ordered
chapter case, end_pts is used, which means not all audio data in the
buffer is played, thus some data is left over when audio decoding
resumes on the next segment. This triggers some code that aborts resync
if there's "audio decoded" (ao_buffer contains something), but no PTS
is known (nothing was actually decoded yet).
Simplify, and always bind the output buffer to the decoder.
CC: @mpv-player/stable (maybe)
--hls-bitrate=min/max lets you select the min or max bitrate. That's it.
Something more sophisticated might be possible, but is probably not even
worth the effort.
Because that might be a bad idea.
Note that remote playlists still can use any protocol marked with
is_safe and is_network, because the case of http-hosted playlists
containing URLs using other streaming protocols is not unusual.
Until now, you had to use --load-unsafe-playlists or --playlist to get
playlists loaded. Change this and always load playlists by default.
This still attempts to reject unsafe URLs. For example, trying to invoke
libavdevice pseudo-demuxer is explicitly prevented. Local paths and any
http links (and some more) are always allowed.
In theory, timestamps can be negative, so we shouldn't just return -1
as special value.
Remove the separate code for clearing decode buffers; use the same code
that is used for normal seek reset.
sub_reset() was called on cycling subtitle tracks and on seeking. Since
we don't want that subtitles disppear on cycling, sd_lavc.c didn't clear
its internal subtitle queue on reset, which meant that seeking with PGS
subtitles could leave the subtitle on screen (PGS subtitles usually
don't have a duration set).
Call it only on seeking, so we can also strictly clear the subtitle
queue in sd_lavc.
(This still can go very wrong if you disable a subtitle, seek, and
enable it again - for example, if used with libavformat that uses "SSA"
style demuxed ASS subtitle packets. That shouldn't happen with newer
libavformat versions, and the user can "correct" it anyway by executing
a seek while the subtitle is selected.)
The previous commit broke these things, and fixing them is separate in
this commit in order to reduce the volume of changes.
Move the image queue from the VO to the playback core. The image queue
is a remnant of the old way how vdpau was implemented, and increasingly
became more and more an artifact. In the end, it did only one thing:
computing the duration of the current frame. This was done by taking the
PTS difference between the current and the future frame. We keep this,
but by moving it out of the VO, we don't have to special-case format
changes anymore. This simplifies the code a lot.
Since we need the queue to compute the duration only, a queue size
larger than 2 makes no sense, and we can hardcode that.
Also change how the last frame is handled. The last frame is a bit of a
problem, because video timing works by showing one frame after another,
which makes it a special case. Make the VO provide a function to notify
us when the frame is done, instead. The frame duration is used for that.
This is not perfect. For example, changing playback speed during the
last frame doesn't update the end time. Pausing will not stop the clock
that times the last frame. But I don't think this matters for such a
corner case.
This also reduces some code duplication with other parts of the code.
The changfe is mostly cosmetic, although there are also some subtle
changes in behavior. At least one change is that the big desync message
is now printed after every seek.
Regression since commit 261506e3. Internally speaking, playback was
often not properly terminated, and the main part of handle_keep_open()
was just executed once, instead of any time the user tries to seek. This
means playback_pts was not set, and the "current time" was determined by
the seek target PTS.
So fix this aspect of video EOF handling, and also remove the now
unnecessary eof_reached field.
The pause check before calling pause_player() is a lazy workaround for
a strange event feedback loop that happens on EOF with --keep-open.
If you for example use --audio-file, disable the external track, seek,
and enable the external track again, the playback position of the
external file was off, and you would get major A/V desync. This was
actually supposed to work, but broke at some time ago (probably commit
2b87415f). It didn't work, because it attempted to seek the stream if it
was already selected, which was always true due to
reselect_demux_streams() being called before that.
Fix by putting the initial selection and the seek together.
This commit makes audio decoding non-blocking. If e.g. the network is
too slow the playloop will just go to sleep, instead of blocking until
enough data is available.
For video, this was already done with commit 7083f88c. For audio, it's
unfortunately much more complicated, because the audio decoder was used
in a blocking manner. Large changes are required to get around this.
The whole playback restart mechanism must be turned into a statemachine,
especially since it has close interactions with video restart. Lots of
video code is thus also changed.
(For the record, I don't think switching this code to threads would
make this conceptually easier: the code would still have to deal with
external input while blocked, so these in-between states do get visible
[and thus need to be handled] anyway. On the other hand, it certainly
should be possible to modularize this code a bit better.)
This will probably cause a bunch of regressions.
Broken by commit 1301a907. This commit added demuxer threading, and
changed some other things to make them simpler and more orthogonal. One
of these things was ntofications about streams that appear during
playback. That's an obscure corner case, but the change made handling of
it as natural as normal initialization.
This didn't work for two reasons:
1. When playing an ordered chapters file where the initial segment was
not from the main file, its streams were added to the track list. So
they were printed twice, and switching to the next segment didn't work,
because the right streams were not selected.
2. EDL, CUE, as well as possibly certain Matroska files don't have any
data or tracks in the "main" demuxer, so normally the first segment is
picked for the track list. This was simply broken.
Fix by sprinkling the code with various hacks.
Instead of blocking on the demuxer when reading a packet, let packets be
read asynchronously. Basically, it polls whether a packet is available,
and if not, the playloop goes to sleep until the demuxer thread wakes it
up.
Note that the player will still block for I/O, because audio is still
read synchronously. It's much harder to do the same change for audio
(because of the design of the audio decoding path and especially
initialization), so audio will have to be done later.
This adds a thread to the demuxer which reads packets asynchronously.
It will do so until a configurable minimum packet queue size is
reached. (See options.rst additions.)
For now, the thread is disabled by default. There are some corner cases
that have to be fixed, such as fixing cache behavior with webradios.
Note that most interaction with the demuxer is still blocking, so if
e.g. network dies, the player will still freeze. But this change will
make it possible to remove most causes for freezing.
Most of the new code in demux.c actually consists of weird caches to
compensate for thread-safety issues (with the previously single-threaded
design), or to avoid blocking by having to wait on the demuxer thread.
Most of the changes in the player are due to the fact that we must not
access the source stream directly. the demuxer thread already accesses
it, and the stream stuff is not thread-safe.
For timeline stuff (like ordered chapters), we enable the thread for the
current segment only. We also clear its packet queue on seek, so that
the remaining (unconsumed) readahead buffer doesn't waste memory.
Keep in mind that insane subtitles (such as ASS typesetting muxed into
mkv files) will practically disable the readahead, because the total
queue size is considered when checking whether the minimum queue size
was reached.
The final goal is all mp_msg calls produce complete lines. We want this
because otherwise, race conditions could corrupt the terminal output,
and it's inconvenient for the client API too. This commit works towards
this goal. There's still code that has this not fixed yet, though.
No reason to wait until the audio has been played. This isn't a problem
with gapless audio disabled, and since gapless is now default, this
behavior might be perceived as regression.
CC: @mpv-player/stable
DVD and Bluray (and to some extent cdda) require awful hacks all over
the codebase to make them work. The main reason is that they act like
container, but are entirely implemented on the stream layer. The raw
mpeg data resulting from these streams must be "extended" with the
container-like metadata transported via STREAM_CTRLs. The result were
hacks all over demux.c and some higher-level parts.
Add a "disc" pseudo-demuxer, and move all these hacks and special-cases
to it.
While I'm not very fond of "const", it's important for declarations
(it decides whether a symbol is emitted in a read-only or read/write
section). Fix all these cases, so we have writeable global data only
when we really need.
Convert all these commands to properties. (Except tv_last_channel, not
sure what to do with this.) Also, internally, don't access stream
details directly, but dispatch commands with stream ctrls.
Many of the new properties are a bit strange, because they're write-
only. Also remove some OSD output these commands produced, because I
couldn't be bothered to port these.
In general, this makes everything much cleaner, and will also make it
easier to e.g. move the demuxer to its own thread.
Don't bother updating input.conf, but changes.rst documents how old
commands map to the new ones.
Mostly untested, due to lack of hardware.
Basically, this allows gapless playback with similar files (including
the ordered chapter case), while still being robust in general.
The implementation is quite simplistic on purpose, in order to avoid
all the weird corner cases that can occur when creating the filter
chain. The consequence is that it might do not-gapless playback in
more cases when needed, but if that bothers you, you still can use
the normal gapless mode.
Just using "--gapless-audio" or "--gapless-audio=yes" selects the old
mode.
stream.start_pos was needed for optical media only, and (apparently) not
for very good reasons. Just get rid of it.
For stream_dvd, we don't need to do anything. Byte seeking was already
removed from it earlier.
For stream_cdda and stream_vcd, emulate the start_pos by offsetting the
stream pos as seen by the rest of mpv.
The bits in discnav.c and loadfile.c were for dealing with the code
seeking back to the start in demux.c. Handle this differently by
assuming the demuxer is always initialized with the stream at start
position, and instead seek back if initializing the demuxer fails.
Remove the --sb option, which worked by modifying stream.start_pos. If
someone really wants this option, it could be added back by creating a
"slice" stream (actually ffmpeg already has such a thing).
Some options change from percentages to number of kilobytes; there are
no cache options using percentages anymore.
Raise the default values. The cache is now 25000 kilobytes, although if
your connection is slow enough, the maximum is probably never reached.
(Although all the memory will still be used as seekback-cache.)
Remove the separate --audio-file-cache option, and use the cache default
settings for it.
Also remove MSGL_SMODE and friends.
Note: The indent in options.rst was added to work around a bug in
ReportLab that causes the PDF manual build to fail.
The interrupt callback will can be called from another thread if the
cache is enabled, and the stream disconnects. Then stream_reconnect()
will call this function from within the cache thread.
mp_input_check_interrupt() is not thread-safe due to read_events() not
being thread-safe. It will call input callbacks added with
mp_input_add_fd() - these callbacks lead to code not protected by locks,
such as reading X11 events.
Solve this by adding a stupid hack, which checks whether the calling
thread is the main playback thread (i.e. calling the input callbacks
will be safe). We can remove this hack later, but it requires at least
moving the VO to its own thread first.
And slightly adjust the semantics of MPV_EVENT_PAUSE/MPV_EVENT_UNPAUSE.
The real pause state can now be queried with the "core-idle" property,
the user pause state with the "pause" property, whether the player is
paused due to cache with "paused-for-cache", and the keep open event can
be guessed with the "eof-reached" property.
This property is set to "yes" if playback was paused due to --keep-open.
The change notification might not always be perfect; maybe that should
be improved.
Otherwise, the client API user could not know why playback was stopped.
Regarding the fact that 0 is used both for normal EOF and EOF on error:
this is because mplayer traditionally did not distinguish these, and in
general it's hard to tell the real reason. (There are various weird
corner cases which make it hard.)
And consistently use MP_NOPTS_VALUE as error value for the users of this
function. This is better than using -1, especially because negative
values can be valid timestamps.
Instead of comparing the current chapter every time, set the playback
end timestamp to the chapter end. Likewise, don't execute an extra seek
for the start chapter.
Maybe we could also use the timeline facility to restrict playback to
the given chapter range, but this would be strange when using
--chapter=N to start playback at a given chapter. Then you couldn't seek
back, which is possibly not what the user wants.
Instead, always use the mpctx->chapters array. Before this commit, this
array was used only for ordered chapters and such, but now it's always
populated if there are chapters.
Instead of parsing the ASS file in demux_libass.c and trying to pass the
ASS_Track to the subtitle renderer, just read all file data in
demux_libass.c, and let the subtitle renderer pass the file contents to
ass_process_codec_private(). (This happens to parse full files too.)
Makes the code simpler, though it also relies harder on the (messy)
probe logic in demux_libass.c.
Remove the ao_buffer_playable_samples field. This contained the number
of samples that fill_audio_out_buffers() wanted to write to the AO (i.e.
this data was supposed to be played at some point), but ao_play()
rejected it due to partial fill.
This could happen with many AOs, notably those which align all written
data to an internal period size (often called "outburst" in the AO
code), and the accepted number of samples is rounded down to period
boundaries. The left-over samples at the end were still kept in
mpctx->ao_buffer, and had to be played later.
The reason ao_buffer_playable_samples had to exist was to make sure that
at EOF, the correct number of left-over samples was played (and not
possibly other data in the buffer that had to be sliced off due to
endpts in fill_audio_out_buffers()). (You'd think you could just slice
the entire buffer, but I suspect this wasn't done because the end time
could actually change due to A/V sync changes. Maybe that was the reason
it's so complicated.)
Some commits ago, ao.c gained internal buffering, and ao_play() will
never return partial writes - as long as you don't try to write more
samples than ao_get_space() reports. This is always the case. The only
exception is filling the audio buffers while paused. In this case, we
decode and play only 1 sample in order to initialize decoding (e.g. on
seeking). Actually playing this 1 sample is in fact a bug, but even of
the AO doesn't have period size alignment, you won't notice it. In
summary, this means we can safely remove the code.
