Allow DR to work with reget_buffer when no buffer_hints are set.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@33287 b3059339-0415-0410-9bf9-f77b7e298cf2
Allow reget_buffer to somewhat work after direct rendering failure.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@33286 b3059339-0415-0410-9bf9-f77b7e298cf2
Do not try to set up the FS segment when using quicktime to decode,
it makes no sense to do that.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@33259 b3059339-0415-0410-9bf9-f77b7e298cf2
Fix artefacts at right border of scaled bitmap subtitles by clearing
the destination to 0 first if the width is not a multiple of 8.
This is necessary because some of the optimized sub drawing functions
always draw pixels in multiples of 8, so we cannot rely on any "dirt"
in the "unused" borders being ignored.
Note that due to the way rendering works, both alpha and the image need
to be cleared.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@33230 b3059339-0415-0410-9bf9-f77b7e298cf2
Add dummy -shuffle and -noshuffle options so they appear in
-list-options output. These features are not implemented as options;
rather they're features of the command line parser.
Also add the CONF_NOCFG flag to the existing playlist option, which is
a similar placeholder for a command line parser feature.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@33147 b3059339-0415-0410-9bf9-f77b7e298cf2
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@33148 b3059339-0415-0410-9bf9-f77b7e298cf2
Ensure we always pass a buffer of at least sector size to the read
function. This is never an issue with streams that have actual
sectors, as the reads will always return a multiple of sector size and
the cache is always used in blocks of sector size. However the rtp
protocol misuses this so it can just assume it always has a
sufficiently large buffer available and thus fails without this extra
hack.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@33120 b3059339-0415-0410-9bf9-f77b7e298cf2
Change MP_IMGFLAG_ACCEPT_STRIDE to MP_IMGFLAG_ACCEPT_ALIGNED_STRIDE in
get_buffer() as various FFmpeg assembly routines assume aligned input.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@33097 b3059339-0415-0410-9bf9-f77b7e298cf2
VDPAU hardware decoding does not support colorspaces other than 4:2:0.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@33096 b3059339-0415-0410-9bf9-f77b7e298cf2
Add the various decoders to codecs.conf and increase the maximum
number of buffered pts in stheader.h (apparently CrystalHD can have
very high decoder lag).
Patch by Philip Langdale, philipl overt org
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@33095 b3059339-0415-0410-9bf9-f77b7e298cf2
Support 'lpcm' in mov files, has audible (clipping?) artefacts on some
systems.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@33075 b3059339-0415-0410-9bf9-f77b7e298cf2
Support 32bit big endian float pcm in aiff.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@33076 b3059339-0415-0410-9bf9-f77b7e298cf2
Audio with all codec tags other than 0x2000 was byte-swapped, while
only "dnet" should be.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@33028 b3059339-0415-0410-9bf9-f77b7e298cf2
Libavcodec has no parser that would work on byte-swapped AC3, but at
least don't run the normal AC-3 one which would only break things.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@33026 b3059339-0415-0410-9bf9-f77b7e298cf2
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@33027 b3059339-0415-0410-9bf9-f77b7e298cf2
Support audio in Leitch/Harris' VR native stream format (LXF).
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@32990 b3059339-0415-0410-9bf9-f77b7e298cf2
Support dvvideo in Leitch/Harris' VR native stream format (LXF).
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@32991 b3059339-0415-0410-9bf9-f77b7e298cf2
Add ID_DVD_TITLE_x_CHAPTERS and ID_DVD_CURRENT_TITLE to the output of
dvdnav:// -identify.
Patch by Mike Castle, dalgoda+mplayer A gmail
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@32982 b3059339-0415-0410-9bf9-f77b7e298cf2
When reading from a stream fails, try one more time after a reset.
This should re-establish for example timed-out network connections.
Fixes bug #1841.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@32954 b3059339-0415-0410-9bf9-f77b7e298cf2
100l, fix incorrect len when retrying read.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@32957 b3059339-0415-0410-9bf9-f77b7e298cf2
Improve stream reset on read error, should now fix bug #1841 in more
cases, e.g. also with -cache.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@32977 b3059339-0415-0410-9bf9-f77b7e298cf2
Add ugly hack to compensate DVDNAV's ugly hacks and fix seeking.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@33122 b3059339-0415-0410-9bf9-f77b7e298cf2
The "gamma" setting only changed red gamma. Fix it to change all of
red, green and blue gamma.
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@32895 b3059339-0415-0410-9bf9-f77b7e298cf2
At least for Wing Commander 4 files, -demuxer lavf is needed to
play XAN DPCM audio (while Wing Commander 3 avi plays fine with
-demuxer avi, although it also contains the video codec we call "XAN
wc4").
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@32894 b3059339-0415-0410-9bf9-f77b7e298cf2
None of the calling sites to stream_write_buffer were checking the
return value to see if all bytes got written (nothing in current code
actually calls it any more after MEncoder was removed).
This was causing (very occasionally) problems with mencoder when using
output pipes AND running under a sandbox or when being straced (ptrace
is the culprit). Theoretically this problem can happen without pipes
or ptrace.
Only stream_file, stream_smb and stream_ffmpeg implement
write_buffer and ffmpeg already handles this internally.
Original patch by Sang-Uok Kum.
Signed-off-by: Tobias Diedrich <ranma@google.com>
git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@32881 b3059339-0415-0410-9bf9-f77b7e298cf2
Add option -osd-fractions which enables display of fractional seconds
when showing the current playback time on OSD.
Based on a patch from Christian <herr.mitterlehner@gsmpaaiml.com> but
with several modifications.
libavformat returns nonsense per-stream bitrate values for some MPEG
files (0 or many times higher than the overall bitrate of the file),
which triggered the heuristic to enable byte-based seeking in
demux_lavf and then made the byte-based seeks wildly inaccurate.
Disable the support for byte-based seeks. This will avoid problems
with files that have consistent timestamps, but on the other hand will
completely break seeking in MPEG files that have timestamp resets.
I'll probably add at least an option to manually enable byte-based
seeking later.
After creating a video window the common X code waited for a MapNotify
event before proceeding. This meant that if the window was opened on
another workspace the player would be stuck until the user switched to
that workspace and the window could become actually visible. Remove
this waiting code. I don't know why it was there or if it was actually
beneficial/needed for some setup (at least common uses seem to work
fine without it); it comes from the earliest MPlayer versions visible
in VCS history.
Remove code that tries to select audio track during demuxer
initialization from demux_mkv and demux_lavf. Just leave audio
disabled at that point; the higher-level select_audio() function will
call the demuxer to switch track later anyway.
Removing this unneeded code also fixes use of these demuxers as the
main demuxer with -audiofile. Before the automatic track selection
would have enabled an audio track (if the file had any); as the main
demuxer was not used for audio the unused packets from this enabled
track would accumulate until they reached queue size limits.
The select_audio() call was done on the main demuxer, not -audiofile
one (the "if (mpctx->num_sources)" test in the previous code was
always true). Call it on the -audiofile demuxer instead. The
-audiofile stuff still needs a proper cleanup later though.
Remove --with-glib-config, --with-gtk-config, --enable-gui,
--disable-gui, --enable-gtk1, --disable-gtk1. The only one of these
that still had any effect was --enable-gui which printed a warning
about GUI removal and exited. The --with options were still shown in
help output, the rest had already been deleted from that.
Commit de42015a97 ("demux_mkv: read tags") added code that
failed to initialize a loop variable. Fix. No visible problems caused
by the bug have been reported.
Delete mp3lib which has been the default mp3 decoder until now. In
addition to being an unnecessary embedded library it now fails to
compile correctly with the new gcc-4.6, producing noise.
After the deletion the default decoder priority for mp3 will be first
libmpg123 (a newer version of the code that mp3lib was based on) if
available, then ffmp3float which should be available in all normal
compiles. I think that some tweaking may be required as these decoder
alternatives get wider testing, but any problems should be solvable
and there should be no need for mp3lib.
Reordering to libavcodec channel order was broken with libavcodec
versions using float input to the ac3 encoder because the reordering
code still assumed int16 sample size. Fix.
Duration may now be set for packet types other than subtitles; as far
as I can tell nothing should care. A check requiring valid duration
values for subtitles is removed, because duration may not be properly
set for all bitmap subtitle types; hopefully this doesn't make the
behavior with (already broken) subtitles without duration worse.
