This overlay support specifically skips the OpenGL rendering chain, and
uses GL rendering only for OSD/subtitles. This is for devices which
don't have performant GL support.
hwdec_rpi.c contains code ported from vo_rpi.c. vo_rpi.c is going to be
deprecated. I left in the code for uploading sw surfaces (as it might
be slightly more efficient for rendering sw decoded video), although
it's dead code for now.
Just another corner-caseish potential issue. Unlike unreffing the image
manually, unref_current_image() also takes care of properly unmapping
hwdec frames. (The corner-case part of this is that it's probably never
mapped at this point, but it's apparently not entirely guaranteed.)
The " || vimg->mpi" part virtually never seems to trigger, but on the
other hand could possibly create unintended corner cases (for example by
trying to upload a NULL image, which would then be marked as an error
and render a blue screen).
I guess it's a leftover from over times, where a NULL image meant
"redraw the current frame". This is now handled by actually passing
along the current frame.
Instead of copying the options around... just don't. video.c now has
full control over when options are updated. (It still gets notified from
outside, but it decides when the updated options are copied: when
m_config_cache_update() is called.) So there's no need for tricky
stuff, and it can be simplified a bit.
Also change lcms.c. We could do it like video.c, and get the options
from the global config store. But it seems simpler to just provide a
pointer to an option struct, which is arbitrarily mutated from the
outside (from the perspective of lcms.c).
Setting --icc-profile had no effect, until a vo_opengl option was
changed at runtime. We must initialize the renderer for the initial
option state too.
For some reason, the ICC profile gets loaded twice. The next commit
happens to fix this.
vo_opengl sub-option were always rather annoying to handle. It seems
better to make them global options instead. This is simpler and easier
to use. The only disadvantage we are aware of is that it's not clear
that many/all of these new global options work with vo_opengl only.
--vo=opengl-hq is also deprecated.
There is extensive compatibility with the old behavior. One exception is
that --vo-defaults will not apply to opengl-hq (though with opengl it
still works). vo-cmdline is also dysfunctional and will be removed in a
following commit.
These changes also affect opengl-cb.
The update mechanism is still rather inefficient: it requires syncing
with the VO after each option change, rather than batching updates.
There's also no granularity (video.c just updates "everything", and if
auto-ICC profiles are enabled, vo_opengl.c will fetch them on each
update).
Most of the manpage changes were done by Niklas Haas <git@haasn.xyz>.
Reduce accesses to the renderer opts in vo_opengl.c, and instead add
accessors for them to video.c.
I suppose gamma and maybe icc-auto could be moved to vo_opengl.c
options. Also, the output colorspace could probably be adjusted to what
is really used, not just the options (although it's possible that this
commit changes this, due to video.c mutating its own copy of the options
according to actual renderer capapbilities).
But don't deal with this now.
Deprecated in favor of user-shaders, which are functionally equivalent
but superior. (Except in the case of scaler-shader, which has no direct
replacement, but it turned out to be a very unpopular feature either way
- most custom scalers don't fit into the mpv kernel infrastructure and
are therefore implemented as user shaders either way)
Signed-off-by: wm4 <wm4@nowhere>
It seems like many GL implementations (including Mesa) choke on this,
while others are fine. We still think that this use of the GL API is
allowed by the standard (at least in the Mesa case), so to reduce
confusion, explicitly check the "controversial" calls, and use an
appropriate error message.
This requires changing the pixel upload alignment because the odd sizes
might not be aligned to multiples of 4.
Anyway, the restriction has no real benefit and the sizes in between 32
and 64 might be worth using, so just drop it.
This code had the exact same texture indexing bug that the original
scaler code had before the introduction of the LUT_POS macro to fix it.
We can re-use this same macro here, and the performance drop is
virtually entirely negligible. The benefit is greatly improved LUT
accuracy as the 3DLUT size decreases - in particular, the old LUT
started introducing more and more black crush the lower your LUT size is
(because the error was essentially an over-contrast bias, with a
magnitude linearly related to the lut size).
The new code improves black stability as the LUT size decreases, and
only at very low values (16 and below) do black levels start noticeably
getting affected (due to crude linearization of the nonlinear response
curve).
The default value of 3dlut-size is definitely generous enough for this
to make no difference out of the box, but it also causes no performance
drop at all on my machine so I see no harm in improving the logic.
Furthermore, this means we could easily decrease the default 3dlut size
in a future commit, perhaps even down to 64x64x64 as a default. (But
more testing is warranted here)
This uses GLSL mix() instead of going through an indirect texture
access. Easy to implement and might require less resources on some
devices, since the oversample code was already essentially just a
special case of this.
Could be made the new default (as per issue #2685), but that should be
done in a separate commit.
This can for example happen with vo_opengl_cb, if it is used with a GL
implementation that does not supports FBOs. (mpv itself should never
attempt to use FBOs if they're not available.)
Without this check it would trigger an assert() in our dummy
glBindFramebuffer wrapper.
Suspected cause of #3308, although it's still unlikely.
This moves some of the bulky user-shader specific logic into the file
dedicated to it. Rather than expose video.c state, variable lookup is
now done via a simulated closure.
This involves multiple changes:
1. Brightness metadata is split into nominal peak and signal peak.
For a quick and dirty explanation: nominal peak is the brightest value
that your color space can represent (i.e. the brightness of an encoded
1.0), and signal peak is the brightest value that actually occurs in
the video (i.e. the brightest thing that's displayed).
2. vo_opengl uses a new decision logic to figure out the right nom_peak
and sig_peak for all situations. It also does a better job of picking
the right target gamut/colorspace to use for the OSD. (Which still is
and still should be treated as sRGB). This change in logic also
fixes#3293 en passant.
3. Since it was growing rapidly, the logic for auto-guessing / inferring
the right colorimetry configuration (in pass_colormanage) was split from
the logic for actually performing the adaptation (now pass_color_map).
Right now, the new logic doesn't do a whole lot since HDR metadata is
still ignored (but not for long).
This has two reasons:
1. I tend to add new fields to this metadata, and every time I've done
so I've consistently forgotten to update all of the dozens of places in
which this colorimetry metadata might end up getting used. While most
usages don't really care about most of the metadata, sometimes the
intend was simply to “copy” the colorimetry metadata from one struct to
another. With this being inside a substruct, those lines of code can now
simply read a.color = b.color without having to care about added or
removed fields.
2. It makes the type definitions nicer for upcoming refactors.
In going through all of the usages, I also expanded a few where I felt
that omitting the “young” fields was a bug.
Commit 883d3114 seems to have (accidentally?) dropped the FBOTEX_FUZZY
from the output_fbo resize, which means that current master will keep
resizing and resizing the FBO as you change the window size, introducing
severe memory leaking after a while. (Not sure why that would cause
memory leaks, but I blame nvidia)
Either way, it's bad for performance too, so it's worth fixing.
GL generally does not support flipping the image on upload, meaning
negative strides are not supported. vo_opengl handles this by flipping
rendering if the stride is inverted, and gl_pbo_upload() "ignores"
negative strides by uploading without flipping the image.
If individual planes had strides with different signs, this broke. The
flipping affected the entire image, and only the sign of the first plane
was respected.
This is just a crazy corner case that will never happen, but it turns
out this is quite simple to support, and actually improves the code
somewhat.
This introduces a gl_pbo_upload_tex() function, which works almost like
our gl_upload_tex() glTexSubImage2D() wrapper, except it takes a struct
which caches the PBO handles. It also takes the full texture size (to
make allocating an ideal buffer size easier), and a parameter to disable
PBOs (so that the caller doesn't have to duplicate the gl_upload_tex()
call if PBOs are disabled or unavailable).
This also removes warnings and fallbacks on PBO failure. We just
silently try using PBOs on every frame, and if that fails at some point,
revert to normal texture uploads. Probably doesn't matter.
Instead of hard-coding a big list, move some of the functionality
to csputils. Affects both the auto-guess blacklist and the peak
estimation.
Also update the comments.
Too many "exceptions" these days, it's easier to just hard-code a
whitelist instead of a blacklist. And besides, it only really makes
sense to avoid adaptation for BT.601 specifically, since that's the one
we auto-guess based on the resolution.
I'm not even sure why we ever consulted *_src to begin with, since that
just describes the current image format - and not the original metadata.
(And in fact, we specifically had logic to work around the impliciations
this had on linear scaling)
image_params is *the* authoritative source on the intended (i.e.
reference) image metadata, whereas *_src may be changed by previous
passes already. So only consult image_params for picking auto-generated
values.
Also, add some more missing "wide gamut" and "non-gamma" curves to the
autoconfig blacklist. (Maybe it would make sense to move this list to
csputils in the future? Or perhaps even auto-detect it based on the
associated primaries)
User request and not that hard. Closes#3157.
Note that FFmpeg doesn't support this and there's no signalling in HEVC
etc., so the only way users can access it is by using vf_format
manually.
Mind: This encoding uses full range values, not TV range.
This HDR function is unique in that it's still display-referred, it just
allows for values above the reference peak (super-highlights). The
official standard doesn't actually document this very well, but the
nominal peak turns out to be exactly 12.0 - so we normalize to this
value internally in mpv. (This lets us preserve the property that the
textures are encoded in the range [0,1], preventing clipping and making
the best use of an integer texture's range)
This was grouped together with SMPTE ST2084 when checking libavutil
compatibility since they were added in the same release window, in a
similar timeframe.
Until now, we've always converted vdpau video surfaces to RGB, and then
mapped the resulting RGB texture. Change this so that the surface is
mapped as NV12 plane textures.
The reason this wasn't done until now is because vdpau surfaces are
mapped in an "interlaced" way as separate fields, even for progressive
video. This requires messy reinterleraving. It turns out that even
though it's an extra processing step, the result can be faster than
going through the video mixer for RGB conversion.
Other than some potential speed-gain, doing this has multiple other
advantages. We can apply our own color conversion, which is important in
more complex cases. We can correctly apply debanding and potentially
other processing that requires chroma-specific or in-YUV handling.
If deinterlacing is enabled, this switches back to the old RGB
conversion method. Until we have at least a primitive deinterlacer in
vo_opengl, this will stay this way. The d3d11 and vaapi code paths are
similar. (Of course these don't require any crazy field reinterleaving.)
The OpenGL 3.0+ and ES specs are quite clear on what values are
accepted for the attachment object name parameter. And there's no
overlap for the default framebuffer. Sigh.
Probably fixes Mesa raising an error in this case and might fix#3251.
Regression by the previous vo_opengl change.
Until now, we've used system-specific API (GLX, EGL, etc.) to retrieve
the depth of the default framebuffer. (We equal this to display depth
and use the determined depth for dithering.)
We can actually retrieve this value through standard GL API, and it
works everywhere (except GLES 2 of course). This simplifies everything a
great deal.
egl_helpers.c is empty now. But I expect that some EGL boilerplate will
be moved to it, so don't remove it yet.
This is mainly for the nnedi3 user shader. With all whose NN weights
hardcoded into the shader source code, the shader file could be as
large as 300 kB.
User hooks can now use an extra WHEN expression to specify when the
shader should be run. For example, this can be used to only run a chroma
scaling shader `WHEN CHROMA.w LUMA.w <`.
There's a slight semantics change to user shaders: When trying to bind a
texture that does not exist, a shader will now be silently skipped
(similar to when the condition is false) instead of generating an error.
This allows shader stages to depend on an optional earlier stage without
having to copy/paste the same condition everywhere.
(In other words: there's an implicit condition on all of the bound
textures existing)
The default behavior of vo_opengl has pretty much always been 'show the
source colors as-is, without caring to adapt it to the target device'.
This decision is mostly based on the fact that if we do anything else,
lots of people will complain.
With the rise of content like BT.2020, however, it turns out more people
complain about this content being very desaturated than people complain
about this content not matching VLC - so let's just map ultra-wide gamut
content back down to standard gamut by default.
Instead of measuring the actual upload time, this instead measures the
time needed to render + map the texture via vdpau. These numbers are
still useful, since they're part of the critical path.
This is plumbed through a new VOCTRL, VOCTRL_PERFORMANCE_DATA, and
exposed as properties render-time-last, render-time-avg etc.
All of these numbers are in microseconds, which gives a good precision
range when just outputting them via show-text. (Lua scripts can
obviously still do their own formatting etc.)
Signed-off-by: wm4 <wm4@nowhere>
To avoid blocking the CPU, we use 8 time objects and rotate through
them, only blocking until the last possible moment (before we need
access to them on the next iteration through the ring buffer). I tested
it out on my machine and 4 query objects were enough to guarantee
block-free querying, but the extra margin shouldn't hurt.
Frame render times are just output at the end of each frame, via MP_DBG.
This might be improved in the future. (In particular, I want to expose
these numbers as properties so that users get some more visible feedback
about render times)
Currently, we measure pass_render_frame and pass_draw_to_screen
separately because the former might be called multiple times due to
interpolation. Doing it this way gives more faithful numbers. Same goes
for frame upload times.
Enable m_sub_options_copy() to copy nested sub-options, and also enable
it to create an option struct from defaults. We can get rid of most of
the crap in assign_options() now.
Calling handle_scaler_opt() to get a static allocation for scaler name
is still needed. It's moved to reinit_scaler(), which seems to be a
better place for it. Without it, dangling pointers could be created when
options are changed. (And in fact, this fixes possible dangling pointers
for window.name.) In theory we could create a dynamic copy, but that
seemed even more messy.
Chance of regressions.
Commit 026b75e7 actually enabled changing icc options at runtime (via
vo_cmdline), but it didn't quite work. In particular, changing the icc-
profile option just kept the old profile, because it was cached
accordingly.
As part of this, change gl_lcms.opts from a struct to a pointer to a
struct. We properly copy it, instead of allowing possibly dangling
strings, like it was done in a working but unclean way before.
Also, reinit the whole rendering chain when the auto icc profile
changes, just like it's done when icc options are changed.
Passing the bstr thing as pointer makes no sense. Everywhere else bstr
structs are passed by value because they're so small. Only when it's
supposed to receive a return value they're not.
Originally, video.c did not access any CMS things (other than lut3d
being set on it), but this has changed. In practice, almost all accesses
to it have moved to video.c. vo_opengl only created it, and set the auto
icc profile path.
Complete the move.
Some things wrt. option handling are a bit fishy. (But when is this not
the case.)
icc-profile-auto was not tested, but the distributed human CI will take
care of it.
