This makes ICY title changes show up at approximately the correct time,
even if the demuxer buffer is huge. (It'll still be wrong if the stream
byte cache contains a meaningful amount of data.)
It should have the same effect for mid-stream metadata changes in e.g.
OGG (untested).
This is still somewhat fishy, but in parts due to ICY being fishy, and
FFmpeg's metadata change API being somewhat fishy. For example, what
happens if you seek? With FFmpeg AVFMT_EVENT_FLAG_METADATA_UPDATED and
AVSTREAM_EVENT_FLAG_METADATA_UPDATED we hope that FFmpeg will correctly
restore the correct metadata when the first packet is returned.
If you seke with ICY, we're out of luck, and some audio will be
associated with the wrong tag until we get a new title through ICY
metadata update at an essentially random point (it's mostly inherent to
ICY). Then the tags will switch back and forth, and this behavior will
stick with the data stored in the demuxer cache. Fortunately, this can
happen only if the HTTP stream is actually seekable, which it usually is
not for ICY things. Seeking doesn't even make sense with ICY, since you
can't know the exact metadata location. Basically ICY metsdata sucks.
Some complexity is due to a microoptimization: I didn't want additional
atomic accesses for each packet if no timed metadata is used. (It
probably doesn't matter at all.)
This includes codec/muxer/demuxer iteration (different iteration
function, registration functions deprecated), and the renaming of
AVFormatContext.filename to url (plus making it a malloced string).
Libav doesn't have the new API yet, so it will break. I hope they will
add the new APIs too.
MPlayer used this to distinguish multiple decoder wrappers (such as
libavcodec vs. binary codec loader vs. builtin decoders). It lost
meaning in mpv as non-libavcodec things were dropped. Now it doesn't
serve any purpose anymore.
Parsing was removed quite a while ago, and the recent filter change
removed any use of the internal family field. Get rid of it.
Use the decoder wrapper that was introduced for video. This removes all
code duplication the old audio decoder wrapper had with the video code.
(The audio wrapper was copy pasted from the video one over a decade ago,
and has been kept in sync ever since by the power of copy&paste. Since
the original copy&paste was possibly done by someone who did not answer
to the LGPL relicensing, this should also remove all doubts about
whether any of this code is left, since we now completely remove any
code that could possibly have been based on it.)
There is some complication with spdif handling, and a minor behavior
change (it will restrict the list of codecs to spdif if spdif is to be
used), but there should not be any difference in practice.
Get rid of the old vf.c code. Replace it with a generic filtering
framework, which can potentially handle more than just --vf. At least
reimplementing --af with this code is planned.
This changes some --vf semantics (including runtime behavior and the
"vf" command). The most important ones are listed in interface-changes.
vf_convert.c is renamed to f_swscale.c. It is now an internal filter
that can not be inserted by the user manually.
f_lavfi.c is a refactor of player/lavfi.c. The latter will be removed
once --lavfi-complex is reimplemented on top of f_lavfi.c. (which is
conceptually easy, but a big mess due to the data flow changes).
The existing filters are all changed heavily. The data flow of the new
filter framework is different. Especially EOF handling changes - EOF is
now a "frame" rather than a state, and must be passed through exactly
once.
Another major thing is that all filters must support dynamic format
changes. The filter reconfig() function goes away. (This sounds complex,
but since all filters need to handle EOF draining anyway, they can use
the same code, and it removes the mess with reconfig() having to predict
the output format, which completely breaks with libavfilter anyway.)
In addition, there is no automatic format negotiation or conversion.
libavfilter's primitive and insufficient API simply doesn't allow us to
do this in a reasonable way. Instead, filters can use f_autoconvert as
sub-filter, and tell it which formats they support. This filter will in
turn add actual conversion filters, such as f_swscale, to perform
necessary format changes.
vf_vapoursynth.c uses the same basic principle of operation as before,
but with worryingly different details in data flow. Still appears to
work.
The hardware deint filters (vf_vavpp.c, vf_d3d11vpp.c, vf_vdpaupp.c) are
heavily changed. Fortunately, they all used refqueue.c, which is for
sharing the data flow logic (especially for managing future/past
surfaces and such). It turns out it can be used to factor out most of
the data flow. Some of these filters accepted software input. Instead of
having ad-hoc upload code in each filter, surface upload is now
delegated to f_autoconvert, which can use f_hwupload to perform this.
Exporting VO capabilities is still a big mess (mp_stream_info stuff).
The D3D11 code drops the redundant image formats, and all code uses the
hw_subfmt (sw_format in FFmpeg) instead. Although that too seems to be a
big mess for now.
f_async_queue is unused.
Was only available with --demuxer-lavf-format=help and the demuxer
needed to be used for it to actually print the list.
This can be used in the future to check if 'dash' support was compiled
with FFmpeg so ytdl_hook can use it instead. For now, dashdec is too
rudimentary to be used right away.
Now macosx_menubar.m and mpv.rc (win32) use the same copyright string.
(This is a bit roundabout, because mpv.rc can't use C constants. Also
the C code wants to avoid rebuilding real source files if only version.h
changed, so only version.c includes version.h.)
This commit introduces a new --oset-metadata key-value-list option,
allowing the user to specify output metadata when encoding
(eg. --oset-metadata=title="Hello",comment="World").
A second option --oremove-metadata is added to exclude existing metadata
from the output file (assuming --ocopy-metadata is enabled).
Not all output formats support all tags, but luckily libavcodec
simply discards unsupported keys.
--copy-metadata describes the result of the option better, (copying metadata
from the source file to the output file). Marks the old --no-ometadata
OPT_REMOVED with a suggestion for the new --no-ocopy-metadata.
I've decided that MP_TRACE means “noisy spam per frame”, whereas
MP_DBG just means “more verbose debugging messages than MSGL_V”.
Basically, MSGL_DBG shouldn't create spam per frame like it currently
does, and MSGL_V should make sense to the end-user and provide mostly
additional informational output.
MP_DBG is basically what I want to make the new default for --log-file,
so the cut-off point for MP_DBG is if we probably want to know if for
debugging purposes but the user most likely doesn't care about on the
terminal.
Also, the debug callbacks for libass and ffmpeg got bumped in their
verbosity levels slightly, because being external components they're a
bit less relevant to mpv debugging, and a bit too over-eager in what
they consider to be relevant information.
I exclusively used the "try it on my machine and remove messages from
MSGL_* until it does what I want it to" approach of refactoring, so
YMMV.
Seems like they finally got rid of this. It was the first lavc vdpau
API, and mpv stopped supporting it in favor of newer APIs a long time
ago, causing confusion to users who tried to enable vdpau decoding by
forcing the decoders (MPlayer style).
Apparently some people want this. Actually making it compile is still
their problem, though, and I expect that build with FFmpeg upstream will
occasionally be broken (as it is right now). This is because mpv also
relies on API provided by Libav, and if FFmpeg hasn't merged that yet,
it's not our problem - we provide a version of FFmpeg upstream with
those changes merged, and it's called ffmpeg-mpv.
Also adjust the README which still talked about FFmpeg releases.
The same should happen with any other side data that matters to mpv,
otherwise filters will drop it.
(No, don't try to argue that mpv should use AVFrame. That won't work.)
ffmpeg_garbage() is copy&paste from frame_new_side_data() in FFmpeg
(roughly feed201849b8f91), because it's not public API. The name
reflects my opinion about FFmpeg's API.
In mp_image_to_av_frame(), change the too-fragile
*new_ref = (struct mp_image){0};
into explicitly zeroing out the fields that are "transferred" to the
created AVFrame.
But --msg-level can only raise the log level used for --log-file,
because the original idea with --log-file was that it'd log verbose
messages to disk even if terminal logging is lower than -v or fully
disabled.
See "Copyright" file for caveats.
This changes the remaining "almost LGPL" files to LGPL, because we think
that the conditions the author set for these was finally fulfilled.
Commit 0e0b87b6f3 fixed that dropped packets did not trigger further
work correctly. But it also made trivial --lavfi-complex freeze. The
reason is that the meaning if DATA_AGAIN was overloaded: the decoders
meant that they should be called again, while lavfi.c meant that other
outputs needed to be checked again. Rename the latter meaning to
DATA_STARVE, which means that the current input will deliver no more
data, until "other" work has been done (like reading other outputs, or
feeding input).
The decoders never return DATA_STARVE, because they don't get input from
the player core (instead, they get it from the demuxer directly, which
is why they still can return DATA_WAIT).
Also document the DATA_* semantics in the enum.
Fixes#4746.
Move multiple GL-specific things from the renderer to other places like
vo_opengl.c, vo_opengl_cb.c, and ra_gl.c.
The vp_w/vp_h parameters to gl_video_resize() make no sense anymore, and
are implicitly part of struct fbodst.
Checking the main framebuffer depth is moved to vo_opengl.c. For
vo_opengl_cb.c it always assumes 8. The API user now has to override
this manually. The previous heuristic didn't make much sense anyway.
The only remaining dependency on GL is the hwdec stuff, which is harder
to change.
Seems like I really like this C99 idiom. No reason not to generalize it
do snprintf(). Introduce mp_tprintf(), which basically this idiom to
snprintf(). This macro looks like it returns a string that was allocated
with alloca() on the caller site, except it's portable C99/C11. (And
unlike alloca(), the result is valid only within block scope.)
Use it in 2 places in the vo_opengl code. But it has the potential to
make a whole bunch of weird looking code look slightly nicer.
This API isn't deprecated (yet?), but it's still inferior and harder to
use than avcodec_free_context().
Leave the call only in 1 case in af_lavcac3enc.c, where we apparently
seriously close and reopen the encoder for whatever reason.
This affects options like --vf or --display-tags. These used a "*"
suffix to match all options starting with a specific name, and handled
the rest in the option parser. Change this to remove the "*" special
case, and require every option parser to declare a list of allowed
suffixes via m_option_type.actions.
The new way is conceptually simpler, because we don't have to account
for the "*" in a bunch of places anymore, and instead everything is
centrally handled in the CLI part of the option parser, where it's
actually needed.
It automatically enables suffixes like -add for a bunch of other
stringlist options.
This was especially grating because it causes problems with the
option/property unification, uses as only thing OPT_FLAG_STORE, and
behaves weird with the client API or scripts.
It can be reimplemented in a much simpler way, although it needs
slightly more code. (Simpler because less special cases.)
If --log-file was used in config files, this could be missing due to the
exact timing when the messages are print, and when the options are
applied. Fix this by always dumping the version again when a log file is
opened.
msg.c is "partial" due to "michael", whose work can be changed to LGPL
only once the core is LGPL. It's explained in the Copyright file. I
prefer to do the relicensing incrementally (due to the overwhelming
workload). Changing the license before that happens would be legally
questionable, but nothing can stop us from essentially marking it as
"will be LGPL".
All authors have agreed to LGPL, with the following exceptions:
9df11ee8bf: the author (probably) didn't agree, but the line that is
added is later fully removed.
35e90f1556: was not asked, but all iconv code was 100% removed from the
mp_msg mechanism (we alwas require UTF-8 now).
4e4f3f806e: the change by michael.
50a86fcc34: the identify variable was move, and completely removed the
latest in commit 48bd03dd91.
1f6c494641: did not agree, but due to a major mp_msg change the added
line became unnecessary and was removed.
da63498bf9: was not reachable, but the MPlayer GUI is gone from mpv
anyway (also commit fc4d6e617d removed these specific additions a long
time ago).
The only definitions from MPlayer code are the CONTROL_* defines (added
in 7a2eec4b as part of libao2 - not part of libao), and MP_NOPTS_VALUE,
which was added in e6338c58. The latter is by "michael", who has agreed
under the condition that the core is LGPL, which has not happened yet,
but considering the macro definition used to be different, has the same
value and similar name to libavformat's AV_NOPTS_VALUE (which existed
first, and as LGPL), and that this almost certainly not copyrightable,
I'm assuming that this is fine.
In a first pass, we check whether libavcodec is present.
Then we try to compile a snippet and check for FFmpeg vs. Libav. (This
could probably also be done by somehow checking the pkgconfig version.
But pkg-config can't deal with that idiotic FFmpeg idea that a micro
version number >= 100 identifies FFmpeg vs. Libav.)
After that we check the project-specific version numbers. This means it
can no longer happen that we accidentally allow older, unsupported
versions of FFmpeg, just because the Libav version numbers are somehow
this way.
Also drop the resampler checks. We hardcode which resampler to each with
each project. A user can no longer force use of libavresample with
FFmpeg.
avcodec_parameters_to_context() overwrites codec_type and codec_id. But
we already set these by passing the selected AVCodec to
avcodec_alloc_context3(). It's entirely possible that at least codec_id
is different when forcing codecs with --ad/--vd. It's probably better
not to cause confusion by overwriting them. It might even trigger
undefined behavior in libavcodec (how it behaves or whether codec_id is
supposed to be strictly set is unknown, though).
This can be useful in other contexts.
Note that we end up setting AVCodecContext.width/height instead of
coded_width/coded_height now. AVCodecParameters can't set coded_width,
but this is probably more correct anyway.
This attempted to pass through double float timestamps in a bit exact
way by reinterpret casting them to int64_t. This usually worked, because
libavcodec (in decoding mode) is mostly not allowed to interpret
timestamps. libavcodec doesn't even know the unit of the timestamps,
unless the API user sets a timebase.
We've stopped doing this, and always set a timebase. Only ad_spdif.c
still used this (indirectly through mp_set_av_packet()), but doesn't
actually need timestamps on the packet. In fact, it's already explicitly
setting the packet timestamp fields to 0 before passing it to FFmpeg
API.
This code is unused, and the passthrough method wasn't terribly elegant
to begin with. Drop this code. Arbitrarily use AV_TIME_BASE_Q as
fallback in situations the passthrough was used.
wm4
Ricardo Constantino
TheAMM
Kevin Mitchell
Niklas Haas
Nicolas F
Rudolf Polzer
Philip Sequeira
wang-bin