GetTimer() is generally replaced with mp_time_us(). Both calls return
microseconds, but the latter uses int64_t, us defined to never wrap,
and never returns 0 or negative values.
GetTimerMS() has no direct replacement. Instead the other functions are
used.
For some code, switch to mp_time_sec(), which returns the time as double
float value in seconds. The returned time is offset to program start
time, so there is enough precision left to deliver microsecond
resolution for at least 100 years. Unless it's casted to a float
(or the CPU reduces precision), which is why we still use mp_time_us()
out of paranoia in places where precision is clearly needed.
Always switch to the correct time. The whole point of the new timer
calls is that they don't wrap, and storing microseconds in unsigned int
variables would negate this.
In some cases, remove wrap-around handling for time values.
The ALSA device was not closed when initialization failed.
The ALSA error handler (set with snd_lib_error_set_handler()) was not
unset when closing ao_alsa. If this is not done, the handler will still
be called when other libraries using ALSA cause errors, even though
ao_alsa was long closed. Since these messages were prefixed with
"[AO_ALSA]", they were misleading and implying ao_alsa was still used.
For some reason, our error handler is still called even after doing
snd_lib_error_set_handler(NULL), which should be impossible. Checking
with the debuggers, inserting printf(), as well as the alsa-lib source
code all suggest our error handler should not be called, but it still
happens. It's a complete mystery.
Mostly copied from vf_lavfi. The parts that could be shared are minor,
because most code is about setting up audio and video, which are too
different.
This won't work with Libav. I used ffplay.c as guide, and noticed too
late that their setup methods are incompatible with Libav's. Trying to
make it work with both would be too much effort. The configure test for
av_opt_set_int_list() should disable af_lavfi gracefully when compiling
with Libav.
Due to option parser chaos, you currently can't have a "," as part of
the filter graph string - not even with quoting or escaping. This will
probably be fixed later.
The audio filter chain is not PTS aware. So we have to do some hacks
to make up a fake PTS, and we have to map the output PTS back to the
filter chain's method of tracking PTS changes and buffering, by
adjusting af->delay.
FFmpeg (as well as Libav) have two layouts called "6.1":
AV_CH_LAYOUT_6POINT1 and AV_CH_LAYOUT_6POINT1_BACK. We call them "6.1"
and "6.1(back)". Change the default layout for 7 channels as well to
return the same layout as av_get_default_channel_layout(). (Looks a bit
questionable, but for now it's better to follow FFmpeg.)
It turns out that ALSA's 4 channel layout is different from mpv's and
ffmpeg's 4.0 layout. Thus trying to do 4 channel output led to incorrect
remixing via lib{av,sw}resample.
Fix the default layouts for the internal filter chain as well, although
I'm not sure if it matters at all.
The libavresample version of the current Libav stable release lacks the
avresample_set_channel_mapping() function. (FFmpeg's libswresample seems
to be fine, because they added swr_set_channel_mapping() first.)
Add a cheap/slow workaround to do channel reordering on our own. We
don't use the recently removed MPlayer code (see commit 586b75a),
because that is not generic enough.
The functionality should be the same as with full-featured
libavresample, and any differences are bugs. It's probably slower,
though.
af_reinit() is responsible for inserting automatic conversion filters
for channel remixing, format conversion, and resampling. We don't
require that a single filter can do all these (even though
af_lavrresample does nearly all of this, sometimes af_format has to be
used instead for format conversions). This makes setting up the chain
more complicated, and a way is needed to prevent endless appending of
conversion filters if a conversion is not possible.
Until now, this used a stupidly simple yet robust static retry limit to
detect failure. This is perfectly fine, and the limit (20) was good
enough to handle about ~5 filters. But with more filters, and if each
filter requires 3 additional conversion filters, this would fail. So
raise the limit to 4 retries per filter. This is still stupidly simple
and robust, but won't arbitrarily fail if the filter count is too large.
To make this easier, get rid of the direct mapping of the
AF_FORMAT_BITS_MASK bit field to number of bytes. This way we can throw
away the unused AF_FORMAT_48BIT and don't have to add ..._56BIT.
The snd_pcm_hw_params_test_format() call actually crashes in alsa-lib if
called with SND_PCM_FORMAT_UNKNOWN, so the already existing fallback
code won't work in this case.
Make all AOs use what has been introduced in the previous commit.
Note that even AOs which can handle all possible layouts (like ao_null)
use the new functions. This might be important if in the future
ao_select_champ() possibly honors global user options about downmixing
and so on.
The point is selecting a minimal fallback. The AOs will call this
through the AO API, so it will be possible to add options affecting
the general channel layout selection.
It provides the following mechanism to AOs:
- forcing the correct channel order
- downmixing to stereo if no layout is available
- allow 5.1 <-> 5.1(side) fallback
- handling "unknown" channel layouts
This is quite weak and lots of code/complexity for little gain. All AOs
already made sure the channel order was correct, and the fallback is of
little value, and could perhaps be done in the frontend instead, like
stereo downmixing with --channels=2 is handled. But I'm not really sure
how this stuff should _really_ work, and the new code will hopefully
provides enough flexibility to make radical changes to channel layout
negotiation easier.
If one of the input or output is an unknown layout, but the other is
known, it can still happen that channels are remixed randomly. Avoid
this by forcing default layouts in this case. (Doesn't work if the
channel counts are different.)
Now mpv's channel map is used to map each channel to a speaker. This
allows in theory for playback of any layout for which ao_openal
actually has a speaker defined. Also add the back-center (BC) speaker,
which allows playback of 6.0 audio. Enabling more layouts by adding
other speakers would be possible, but I'm not sure about the speaker
positions.
This allows supporting 5 channel audio (which can be eother 5.0 or 4.1).
Fallback doesn't work yet. It will do nonsense if the channel layout
doesn't match perfectly, even though it's similar.
Add a CHECK_ALSA_ERROR macro to report ALSA errors. This is similar to
what vo_vdpau does. This removes lots of boiler plate, it almost gives
me the feeling the ao_alsa initialization code is now readable. This
change is squashed with the reformatting, because both changes are
just as noisy and useless.
Using demux_rawaudio and the --rawaudio-channels option is useful for
testing channel map stuff. The libavcodec PCM decoder normalizes the
channel map to ffmpeg order, though. Prevent this by forcing the
original channel map when using the mp-pcm pseudo decoder entry (used by
demux_rawaudio and stream/tv.c only).
Like most other AOs, ao_pulse set the channel count only, always using a
default layout. Try to set the exact layout.
For this, we need a big lookup table to map waveex/lavc/mpv speaker
position to PulseAudio's, since PA_CHANNEL_POSITION_ is apparently not
compatible to waveext, and I haven't seen any API functions that would
help mapping them.
Completely untested. (Let's leave that to someone else...)
This helps passing the channel layout correctly from decoder to audio
filter chain. (Because that part "reuses" the demuxer level codec
parameters, which is very disgusting.)
Note that ffmpeg stuff already passed the channel layout via
mp_copy_lav_codec_headers(). So other than easier dealing with the
demuxer/decoder parameters mess, there's no real advantage to doing
this.
Make the --channels option accept a channel map. Since simple numbers
map to standard layouts with the given number of channels, this is
downwards compatible. Likewise for demux_rawaudio.
This is done in af_lavrresample now, and as part of format negotiation.
Also remove the remaining reorder_channel calls. They were redundant
and did nothing.
This actually breaks audio for 5/6/8 channels. There's no reordering
done yet. The actual reordering will be done inside of af_lavrresample
and has to be made part of the format negotiation.
mp_audio has some redundant fields. Setters like mp_audio_set_format()
initialize these properly.
Also move the mp_audio struct to a the file audio.c.
We can remove a mysterious line of code from af.c:
in.format |= af_bits2fmt(in.bps * 8);
I'm not sure if this was ever actually needed, or if it was some kind of
"make it work" quick-fix that works against the way things were supposed
to work. All filters etc. now set the format correctly, so if there ever
was a need for this code, it's definitely gone.
Schedule mpv's playloop as a high frequency timer inside the main Cocoa event
loop. This has the benefit to allow accessing menus as well as resizing the
window without the playback being blocked and allows to remove countless hacks
from the code that involved manually pumping the event loop as well simulating
manually some of the Cocoa default behaviours.
A huge improvement consists in removing NSApplicationLoad. This is a C function
defined in the Cocoa header and implements a minimal OSX application under ther
hood so that you can use the Cocoa GUI toolkit from C/C++ without having to
respect the Cocoa standards in terms of application initialization. This was
bad because the behaviour implemented by NSApplicationLoad was hard to customize
and had several gotchas especially in the menu department.
mpv was changed to be just a nib-less application. All the Cocoa part is still
generated in code but the event handling is now not dissimilar to what is
present in a stock Mac application.
As a part of reviewing the initialization process, I also removed all of
`osdep/macosx_finder_args`. The useful parts of the code were moved to
`osdep/macosx_appication` which has the broaded responsibility of managing the
full lifecycle of the Cocoa application. By consequence the
`--enable-macosx-finder` configure switch was killed as well, as this feature
is always enabled.
Another change the users will notice is that when using a bundle the `--quiet`
option will be inserted much earlier in the initializaion process. This results
in mpv not spamming mpv.log anymore with all the initialization outputs.
Add dummy input and output filters to remove special cases in the format
negotiation code (af_fix_format_conversion() etc.). The output of the
filter chain is now negotiated in exactly the same way as normal
filters.
Negotiate setting the sample rate in the same way as other audio
parameters. As a side effect, the resampler is inserted at the start of
the filter chain instead of the end, but that shouldn't matter much,
especially since conversion and channel mixing are conflated into the
same filter (due to libavresample's API).
Anything this option did has been removed in the preceding 3 commits.
Note that even though these options sounded like a good idea (like
setting accuracy vs. speed tradeoffs), they were not really properly
implemented.
wm4
eng
Stefano Pigozzi
Rudolf Polzer