Actually rewrite most of the option management code. This affects how
options are allocated, and how thread-safe access to them is done.
One thing that is nicer is that creating m_config_cache does not need to
ridiculously recreate and store the entire option list again. Instead,
option metadata and option storage are now separated. m_config contains
the metadata, and m_config_data all or parts of the actual option
values. (m_config_cache simply uses the metadata part of m_config, which
is immutable after creation.)
The mentioned hack was introduced in commit 1a2319f3e4, and is the
global state around g_group_mutex. Although it was "benign" global
state, it's good that it's finally removed.
For some reason shadow_offset is a int16_t variable (to save some space
or something), which means the static part of the entire option list
must be below 32KB. This is fine, but still add a check against
overflows. (Currently it's 3.6KB. This does not include dynamic
allocations like strings.)
Until now, stopping playback aborted the demuxer and I/O layer violently
by signaling mp_cancel (bound to libavformat's AVIOInterruptCB
mechanism). Change it to try closing them gracefully.
The main purpose is to silence those libavformat errors that happen when
you request termination. Most of libavformat barely cares about the
termination mechanism (AVIOInterruptCB), and essentially it's like the
network connection is abruptly severed, or file I/O suddenly returns I/O
errors. There were issues with dumb TLS warnings, parsers complaining
about incomplete data, and some special protocols that require server
communication to gracefully disconnect.
We still want to abort it forcefully if it refuses to terminate on its
own, so a timeout is required. Users can set the timeout to 0, which
should give them the old behavior.
This also removes the old mechanism that treats certain commands (like
"quit") specially, and tries to terminate the demuxers even if the core
is currently frozen. This is for situations where the core synchronized
to the demuxer or stream layer while network is unresponsive. This in
turn can only happen due to the "program" or "cache-size" properties in
the current code (see one of the previous commits). Also, the old
mechanism doesn't fit particularly well with the new one. We wouldn't
want to abort playback immediately on a "quit" command - the new code is
all about giving it a chance to end it gracefully. We'd need some sort
of watchdog thread or something equally complicated to handle this. So
just remove it.
The change in osd.c is to prevent that it clears the status line while
waiting for termination. The normal status line code doesn't output
anything useful at this point, and the code path taken clears it, both
of which is an annoying behavior change, so just let it show the old
one.
Don't allow it to freeze everything when loading a playlist from network
(although you definitely shouldn't do that, but whatever).
This also affects the really obscure --ordered-chapters-files option.
The --playlist option on the other hand has no choice but to freeze the
shit, because there's no concept of aborting the player during command
line parsing.
This supports named arguments. It benefits from the infrastructure of
async commands.
The plan is to reimplement Lua's utils.subprocess() on top of it.
Removes a good hunk of weird code.
This loses qscale "emulation", some logging, and the fact that duplicate
keys for values starting with +/- were added with AV_DICT_APPEND. I
don't assign those any importance, even if they are user-visible
changes.
The new M_OPT_ flag is just so that nothing weird happens for other
key-value options, which do not interpret a "help" key specially.
On machines with multiple GPUs, /dev/dri/renderD128 isn't guaranteed
to point to a valid vaapi device. This just adds the option to specify
what path to use.
The old fallback /dev/dri/card0 is gone but that's not a loss as its
a legacy interface no longer accepted as valid by libva.
Fixes#4320
I think this will help with reducing code duplication (see following
commit). The error messages loses the multiplication factor, but the
error message will be replaced by a generic one in the following commit
anyway.
Removes the awkward notification through VO_EVENT_WIN_STATE.
Unfortunately, some awkwardness remains in mp_property_display_fps(),
because the property has conflicting semantics with the option.
The playback start logic explicitly waits until the first frame has been
displayed. Usually this will introduce a wait of 1 vsync. For normal
playback this doesn't matter, but with respect to low latency needs,
this only leads to additional data getting queued up in the demuxer or
network buffers.
Another thing is that the timing logic decodes 1 frame ahead (= 1 frame
extra latency) to determine the exact duration of a frame.
To be fair, there doesn't really seem to be a hard reason why this is
needed. With the current code, enabling the option does lead to A/V
desync sometimes (if the demuxer FPS is too inaccurate), and also frame
drops at playback start in some situations. But this all seems to be
avoidable, if the timing logic were to be rewritten completely, which
should probably happen in the future. Thus the new option comes with the
warning that it can be removed any time. This is also why the option has
"hack" in the name.
the title bar is now within the window bounds instead of outside. same
as QuickTime Player. it supports several standard styles, two dark and
two light ones. additionally we have properly rounded corners now and
the borderless window also has the proper window shadow.
Also make the earliest supported macOS version 10.10.
Fixes#4789, #3944
Most options starting with --no-<name> are automatically translated to
--<name>=no. Make the code slightly nicer by using a flag instead of
explicitly comparing option types. Also fix an issue that made the
option parser print nonsense error messages for if --no-... was used for
options which don't support it.
--vf=help will now list libavfilter filters, and e.g. --vf=yadif=help
will list libavfilter filter options.
The latter is rather bare, because the AVOption API is really awful
(holy shit how is it so bad), and would require us to handle _every_
option type manually.
Alternatively we could call av_opt_show2(), which ffmpeg uses for help
output in its CLI tools and which is much more detailed. But it's rather
foreign and forces output through av_log(), so I don't really want to
use it.
Use the decoder wrapper that was introduced for video. This removes all
code duplication the old audio decoder wrapper had with the video code.
(The audio wrapper was copy pasted from the video one over a decade ago,
and has been kept in sync ever since by the power of copy&paste. Since
the original copy&paste was possibly done by someone who did not answer
to the LGPL relicensing, this should also remove all doubts about
whether any of this code is left, since we now completely remove any
code that could possibly have been based on it.)
There is some complication with spdif handling, and a minor behavior
change (it will restrict the list of codecs to spdif if spdif is to be
used), but there should not be any difference in practice.
Get rid of the old vf.c code. Replace it with a generic filtering
framework, which can potentially handle more than just --vf. At least
reimplementing --af with this code is planned.
This changes some --vf semantics (including runtime behavior and the
"vf" command). The most important ones are listed in interface-changes.
vf_convert.c is renamed to f_swscale.c. It is now an internal filter
that can not be inserted by the user manually.
f_lavfi.c is a refactor of player/lavfi.c. The latter will be removed
once --lavfi-complex is reimplemented on top of f_lavfi.c. (which is
conceptually easy, but a big mess due to the data flow changes).
The existing filters are all changed heavily. The data flow of the new
filter framework is different. Especially EOF handling changes - EOF is
now a "frame" rather than a state, and must be passed through exactly
once.
Another major thing is that all filters must support dynamic format
changes. The filter reconfig() function goes away. (This sounds complex,
but since all filters need to handle EOF draining anyway, they can use
the same code, and it removes the mess with reconfig() having to predict
the output format, which completely breaks with libavfilter anyway.)
In addition, there is no automatic format negotiation or conversion.
libavfilter's primitive and insufficient API simply doesn't allow us to
do this in a reasonable way. Instead, filters can use f_autoconvert as
sub-filter, and tell it which formats they support. This filter will in
turn add actual conversion filters, such as f_swscale, to perform
necessary format changes.
vf_vapoursynth.c uses the same basic principle of operation as before,
but with worryingly different details in data flow. Still appears to
work.
The hardware deint filters (vf_vavpp.c, vf_d3d11vpp.c, vf_vdpaupp.c) are
heavily changed. Fortunately, they all used refqueue.c, which is for
sharing the data flow logic (especially for managing future/past
surfaces and such). It turns out it can be used to factor out most of
the data flow. Some of these filters accepted software input. Instead of
having ad-hoc upload code in each filter, surface upload is now
delegated to f_autoconvert, which can use f_hwupload to perform this.
Exporting VO capabilities is still a big mess (mp_stream_info stuff).
The D3D11 code drops the redundant image formats, and all code uses the
hw_subfmt (sw_format in FFmpeg) instead. Although that too seems to be a
big mess for now.
f_async_queue is unused.
Restores behaviour prior to aef2ed5dc1.
That change was apparently unpopular. However, given the amount of
complaining over how hard it is to change the defaults by rebinding every
key, I think the extra option introduced by this commit is justified.
Technically not all behaviour is restored, because now --no-osd-bar will
not instead display the msg text on seek. I think that feature was a
little weird and is now easy enough to remedy with the --osd-on-seek
option.
Instead of duplicating the append code, reimplement it using the
existing code. The difference between -add and -append is that -append
does not take multiple items (thus removing the need for escaping), but
-append can reuse all code for -add by pretending the separator is never
found.
And use it for 2 demuxer options. It could be used for more options
later. (Though the --cache options can not use this, because they use KB
as base unit.)
Add the print callback to all option types (except pseudo option types
which don't represent values). This makes it less confusing for client
API users (no strange properties that can't be read), and also lists the
default properly with --list-options.
Fix the option type for audio formats - they use int, not uint32_t.
Fix some identation cosmetic issues.
There is some craziness here: the function allocates m_config_cache,
which in turn allocates the actual option struct, which is what the
function returns. The user would expect to be able to use talloc_free()
to deallocate everything. Of course this didn't work, because the
returned pointer is not the root parent in the talloc tree.
But with some additional talloc craziness, this can be fixed. We
rearrange the parent pointers such that freeing the option struct will
free m_config_cache first, which uninits the contents in the option
struct, but fortunately not the option struct itself.
This change should simplify API use on the caller side, and reduce
surprises.
mp_read_option_raw() should not print the deprecation warning if the
option is deprecated. This change also means you can't pass an alias
to the function, but all existing uses should be fine.
This is part of trying to get rid of --af-defaults, and the af
resample filter.
It requires a complicated mechanism to set the defaults on the resample
filter for backwards compatibility.
Reasons why you'd want this see manpage additions. Disabled by default,
because it would increase latency of live streams by default. (Or well,
at least it would be another problem when trying getting lower latency.)
This tried to be clever by waiting for a longer time each time the
buffer was underrunning, or shorter if it was getting better. I think
this was pretty weird behavior and makes no sense. If the user really
wants the stream to buffer longer, he/she/it can just pause the player
(the network caches will continue to be filled until they're full).
Every time I actually noticed this code triggering in my own use, I
didn't find it helpful. Apart from that it was pretty hard to test.
Some waiting is needed to avoid that the player just plays the available
data as fast as possible (to compensate for late frames and underrunning
audio). Just use a fixed wait time, which can now be controlled by the
new --cache-pause-wait option.
Remove them from the big MPOpts struct and move them to their sub
structs. In the places where their fields are used, create a private
copy of the structs, instead of accessing the semi-deprecated global
option struct instance (mpv_global.opts) directly.
This actually makes accessing these options finally thread-safe. They
weren't even if they should have for years. (Including some potential
for undefined behavior when e.g. the OSD font was changed at runtime.)
This is mostly transparent. All options get moved around, but most users
of the options just need to access a different struct (changing sd.opts
to a different type changes a lot of uses, for example).
One thing which has to be considered and could cause potential
regressions is that the new option copies must be explicitly updated.
sub_update_opts() takes care of this for example.
Another thing is that writing to the option structs manually won't work,
because the changes won't be propagated to other copies. Apparently the
only affected case is the implementation of the sub-step command, which
tries to change sub_delay. Handle this one explicitly (osd_changed()
doesn't need to be called anymore, because changing the option triggers
UPDATE_OSD, and updates the OSD as a consequence). The way the option
value is propagated is rather hacky, but for now this will do.
--copy-metadata describes the result of the option better, (copying metadata
from the source file to the output file). Marks the old --no-ometadata
OPT_REMOVED with a suggestion for the new --no-ocopy-metadata.
A release has been made, so drop options deprecated for that release.
Also drop some options which have been deprecated a much longer time
before.
Also fix a typo in client-api-changes.rst.
Some old crap which nobody needs and which probably nobody uses.
This relies on a GCC extension: using "## __VA_ARGS__" to remove the
comma from the argument list if the va args are empty. It's supported
by clang, and there's some chance newer standards will introduce a
proper way to do this. (Even if it breaks somewhere, it will be a
problem only for 1 release, since I want to drop the deprecated
properties immediately.)
I've decided that MP_TRACE means “noisy spam per frame”, whereas
MP_DBG just means “more verbose debugging messages than MSGL_V”.
Basically, MSGL_DBG shouldn't create spam per frame like it currently
does, and MSGL_V should make sense to the end-user and provide mostly
additional informational output.
MP_DBG is basically what I want to make the new default for --log-file,
so the cut-off point for MP_DBG is if we probably want to know if for
debugging purposes but the user most likely doesn't care about on the
terminal.
Also, the debug callbacks for libass and ffmpeg got bumped in their
verbosity levels slightly, because being external components they're a
bit less relevant to mpv debugging, and a bit too over-eager in what
they consider to be relevant information.
I exclusively used the "try it on my machine and remove messages from
MSGL_* until it does what I want it to" approach of refactoring, so
YMMV.
wm4
Philip Sequeira
Rostislav Pehlivanov
Akemi
Kevin Mitchell
Olivier Perret
Ricardo Constantino
sfan5
TheAMM
Niklas Haas