This option has been deprecated upstream for a long time, probably
doesn't even work anymore, and won't work moving forwards as we replace
the vulkan code by libplacebo wrappers.
I haven't removed the option completely yet since in theory we could
still add support for e.g. a native glslang wrapper in the future. But
most likely the future of this code is deletion.
As an aside, fix an issue where the man page didn't mention d3d11.
This commit bumps the libmpv version to 1.102
drm-osd-plane -> drm-draw-plane
drm-video-plane -> drm-drmprime-video-plane
drm-osd-size -> drm-draw-surface-size
"draw plane", as in the plane that OpenGL draws to, whether it be
video + OSD or just OSD.
"drmprime video plane", as in the plane used for hwdec video imported
via drmprime.
"draw surface size", as in the size of the surface used for the draw plane
The new names are invariant whether or not hwdec_drmprime_drm is being
used or not. The original naming was very confusing, as when doing
regular rendering (swdec or vaapi) the video would be displayed on the
"OSD plane", and the "Video plane" would remain unused.
Add general primary/overlay plane option to drm-osd-plane-id and
drm-video-plane-id, so that the user can just request any usable
primary or overlay plane for either of these two options. This should
be somewhat more user-friendly (especially as neither of these two
options currently have a useful help function), as usually you would
only be interested in the type of the plane, and not exactly which
plane gets picked.
Despite their place in the tree, hwdecs can be loaded and used just
fine by the vulkan GPU backend.
In this change we add Vulkan interop support to the cuda/nvdec hwdec.
The overall process is mostly straight forward, so the main observation
here is that I had to implement it using an intermediate Vulkan buffer
because the direct VkImage usage is blocked by a bug in the nvidia
driver. When that gets fixed, I will revist this.
Nevertheless, the intermediate buffer copy is very cheap as it's all
device memory from start to finish. Overall CPU utilisiation is pretty
much the same as with the OpenGL GPU backend.
Note that we cannot use a single intermediate buffer - rather there
is a pool of them. This is done because the cuda memcpys are not
explicitly synchronised with the texture uploads.
In the basic case, this doesn't matter because the hwdec is not
asked to map and copy the next frame until after the previous one
is rendered. In the interpolation case, we need extra future frames
available immediately, so we'll be asked to map/copy those frames
and vulkan will be asked to render them. So far, harmless right? No.
All the vulkan rendering, including the upload steps, are batched
together and end up running very asynchronously from the CUDA copies.
The end result is that all the copies happen one after another, and
only then do the uploads happen, which means all textures are uploaded
the same, final, frame data. Whoops. Unsurprisingly this results in
the jerky motion because every 3/4 frames are identical.
The buffer pool ensures that we do not overwrite a buffer that is
still waiting to be uploaded. The ra_buf_pool implementation
automatically checks if existing buffers are available for use and
only creates a new one if it really has to. It's hard to say for sure
what the maximum number of buffers might be but we believe it won't
be so large as to make this strategy unusable. The highest I've seen
is 12 when using interpolation with tscale=bicubic.
A future optimisation here is to synchronise the CUDA copies with
respect to the vulkan uploads. This can be done with shared semaphores
that would ensure the copy of the second frames only happens after the
upload of the first frame, and so on. This isn't trivial to implement
as I'd have to first adjust the hwdec code to use asynchronous cuda;
without that, there's no way to use the semaphore for synchronisation.
This should result in fewer intermediate buffers being required.
Since linear downscaling makes sense to handle independently from
linear/sigmoid upscaling, we split this option up. Now,
linear-downscaling is its own option that only controls linearization
when downscaling and nothing more. Likewise, linear-upscaling /
sigmoid-upscaling are two mutually exclusive options (the latter
overriding the former) that apply only to upscaling and no longer
implicitly enable linear light downscaling as well.
The old behavior was very confusing, as evidenced by issues such
as #6213. The current behavior should make much more sense, and only
minimally breaks backwards compatibility (since using linear-scaling
directly was very uncommon - most users got this for free as part of
gpu-hq and relied only on that).
Closes#6213.
Someone on IRC pointed out that the default stats bindings weren't
documented in the interactive control section of the manual, so
let's add them with a short mention and a reference to the STATS
section of the manual.
by default the pixel format creation falls back to software renderer
when everything fails. this is mostly needed for VMs. additionally one
can directly request an sw renderer or exclude it entirely.
The demuxer cache is the only cache now. Might need another change to
combat seeking failures in mp4 etc. The only bad thing is the loss of
cache-speed, which was sort of nice to have.
duration is parsed as an integer, and the default value is used if ```-1``` is passed. Passing ```-``` as described here causes a parameter value error.
The player fully restarts playback when the edition or disk title is
changed. Before this, the player tried to reinitialized playback
partially. For example, it did not print a new "Playing: <file>"
message, and did not send playback end to libmpv users (scripts or
applications).
This playback restart code was a bit messy and could have unforeseen
interactions with various state. There have been bugs before. Since it's
a mostly cosmetic thing for an obscure feature, just change it to a full
restart. This works well, though since it may have consequences for
scripts or client API users, mention it in interface-changes.rst.
The only effective difference is that the former explicitly checks
whether the JSON value type is string, and errors out if not. The rest
is exactly the same (mpv_set_property_string is mpv_set_property with
MPV_FORMAT_STRING).
It seems silly to keep this, so just remove it.
Until now, stopping playback aborted the demuxer and I/O layer violently
by signaling mp_cancel (bound to libavformat's AVIOInterruptCB
mechanism). Change it to try closing them gracefully.
The main purpose is to silence those libavformat errors that happen when
you request termination. Most of libavformat barely cares about the
termination mechanism (AVIOInterruptCB), and essentially it's like the
network connection is abruptly severed, or file I/O suddenly returns I/O
errors. There were issues with dumb TLS warnings, parsers complaining
about incomplete data, and some special protocols that require server
communication to gracefully disconnect.
We still want to abort it forcefully if it refuses to terminate on its
own, so a timeout is required. Users can set the timeout to 0, which
should give them the old behavior.
This also removes the old mechanism that treats certain commands (like
"quit") specially, and tries to terminate the demuxers even if the core
is currently frozen. This is for situations where the core synchronized
to the demuxer or stream layer while network is unresponsive. This in
turn can only happen due to the "program" or "cache-size" properties in
the current code (see one of the previous commits). Also, the old
mechanism doesn't fit particularly well with the new one. We wouldn't
want to abort playback immediately on a "quit" command - the new code is
all about giving it a chance to end it gracefully. We'd need some sort
of watchdog thread or something equally complicated to handle this. So
just remove it.
The change in osd.c is to prevent that it clears the status line while
waiting for termination. The normal status line code doesn't output
anything useful at this point, and the code path taken clears it, both
of which is an annoying behavior change, so just let it show the old
one.
The player fully restarts playback when the edition or disk title is
changed. Before this, the player tried to reinitialized playback
partially. For example, it did not print a new "Playing: <file>"
message, and did not send playback end to libmpv users (scripts or
applications).
This playback restart code was a bit messy and could have unforeseen
interactions with various state. There have been bugs before. Since it's
a mostly cosmetic thing for an obscure feature, just change it to a full
restart. This works well, though since it may have consequences for
scripts or client API users, mention it in interface-changes.rst.
Before this change, only 1 command or so had named arguments. There is
no reason why other commands can't have them, except that it's a bit of
work to add them.
Commands with variable number of arguments are inherently incompatible
to named arguments, such as the "run" command. They still have dummy
names, but obviously you can't assign multiple values to a single named
argument (unless the argument has an array type, which would be
something different). For now, disallow using named argument APIs with
these commands. This might change later.
2 commands are adjusted to not need a separate default value by changing
flag constants. (The numeric values are C only and can't be set by
users.)
Make the command syntax in the manpage more consistent. Now none of the
allowed choice/flag names are in the command header, and all arguments
are shown with their proper name and quoted with <...>.
Some places in the manpage and the client.h doxygen are updated to
reflect that most commands support named arguments. In addition, try to
improve the documentation of the syntax and need for escaping etc. as
well.
(Or actually most uses of the word "argument" should be "parameter".)
This affects async commands started by client API, commands with async
capability run in a sync way by client API (think mpv_command_node()
with "subprocess"), and detached async work.
Since scripts might want to do some cleanup work (that might involve
launching processes, don't ask), we don't unconditionally kill
everything on exit, but apply an arbitrary timeout of 2 seconds until
async commands are aborted.
I wanted to put all commands through mpv_command_node_async() instead of
mpv_command_node(). Using synchronous commands over a synchronous
transport doesn't make sense anyway.
This would have used the request_id field in IPC requests as reply ID
for the async commands. But the latter need to be [u]int64, while the
former can be any type. To avoid that we need an extra lookup table for
mapping reply IDs to request_id values, we now require that request_id
fields are integers.
Since this would be an incompatible change, just deprecate non-integers
for now, and plan the change for a later time.
The only effective difference is that the former explicitly checks
whether the JSON value type is string, and errors out if not. The rest
is exactly the same (mpv_set_property_string is mpv_set_property with
MPV_FORMAT_STRING).
It seems silly to keep this, so just remove it.
Many asynchronous commands are potentially long running operations, such
as loading something from network or running a foreign process.
Obviously it shouldn't just be possible for them to freeze the player if
they don't terminate as expected. Also, there will be situations where
you want to explicitly stop some of those operations explicitly. So add
an infrastructure for this.
Commands have to support this explicitly. The next commit uses this to
actually add support to a command.
The "run" command is old. I'm not sure why the separate Lua
implementation was added. But maybe it as because the "run" command used
to be limited to a small number of arguments. This limit has been
removed a while ago. In any case, the old implementation is not needed
anymore.
We keep mp.subprocess() with roughly the same semantics for
compatibility with scripts (including the internal ytdl script).
Seems to work with rhe ytdl wrapper. Not tested further.
This supports named arguments. It benefits from the infrastructure of
async commands.
The plan is to reimplement Lua's utils.subprocess() on top of it.
Named arguments should make it easier to have long time compatibility,
even if command arguments get added or removed. They're also much nicer
for commands with a large number of arguments, especially if many
arguments are optional.
As of this commit, this can not be used, because there is no command yet
which supports them. See the following commit.
