I took this out because I thought the filter chain would auto-negotiate
using nv12 without the explicit hint, and it does in the basic case
with no intermediate filter, but once you start adding filters, it
can end up negotiating a different format and then failing.
Today, vdpaurb will fail if it's used with non-hardware-decoded
content. This created work for the user as they have to explicitly
add or not add it, depending on the content.
As an improvement, we can make vdpaurb pass through any frames
that aren't hardware decoded, so that it can always be present in the
filter chain, if desired.
I see no point in keeping these around. Keeping wrappers for some select
libavfilter filters just because MPlayer had these filters is not a good
reason.
Ultimately, all real filtering work should go to libavfilter, and users
should get used to using vf_lavfi directly. We might even not require
the awful double-nested syntax for using libavfilter one day.
vf_rotate, vf_yadif, vf_stereo3d are kept because mpv uses them
internally. (They all extend the lavfi filters or change their
defaults.) vf_mirror is kept for symmetry with vf_flip. vf_gradfun and
vf_pullup are probably semi-popular, so I'll remove them not yet - only
after some more discussion.
This was requested by someone.
All code was written by myself; some minor changes by 2 contributors who
agreed to general LGPL relicensing. 1 line of code is by someone unknown
who possibly wasn't asked (setting the "display_fps" variable), and
which can be reasonably ignored as it makes up only 0.1% of the file.
The interlaced frame test needs to be aware that the input mpi might be
NULL - this happens at the end of a stream when the input frames have
all been submitted but frames still need to be drained from the
decoder.
Normally, vdpau decoded frames are passed directly to a suitable
vo (vo_vdpau or vo_opengl) without ever touching system memory. This
is efficient for output purposes, but prevents any of the regular
filters from being used with such frames.
This new filter implements a read-back step to pull the frames back
into system memory where they can be acted on by other filters.
Eventually the frames will be sent to the vo as if they were normal
software-decoded frames.
Note that a vdpau compatible vo must still be used to ensure that
the decoder is properly initialised.
Signed-off-by: wm4 <wm4@nowhere>
Drop libva versions below 0.34.0. These are ancient, so I don't care.
Drop the vo_vaapi deinterlacer as well. With 0.34.0, VPP is always
available, and deinterlacing is done with vf_vavpp.
The vaCreateSurfaces() function changes its signature - actually it did
in 0.34.0 or so, and the <va/va_compat.h> defined a macro to make it use
the old signature.
This was missing for extended deinterlacer.
Unfortunately, these deinterlacer still do not work. The provided future
frame (which is all the deinterlacers want) seems to be correct, though.
One minor behavioral change is that this always keeps the previous frame
for PTS computations. This could be avoided (in order to keep exactly
the same behavior as before), but it seems more elegant and should not
do any harm. (Also, if we really cared about reducing hw frame refs,
a more worthy goal is producing the field output incrementally.)
The mapped data (pointed to by the param variable) is not needed before,
so the call can be moved down. Also, this prevents that the buffer
remains mapped forever if the other vaMapBuffer() call above fails (the
cleanup code forgets to unmap the buffer - this commit makes it
unnecessary).
This used a do-while loop, which runs only once, as replacement for a
cleanup goto. While this is ok, doing a goto directly is easier to
follow and is closer to idiomatic C. But mainly remove it so that the
indentation can be reduced.
We do not fill them, so we would pass random IDs to the driver. The code
was originally written to handle bob deinterlacing only, so I guess it
originally passed always 0 anyway, despite having code for reference
surface list allocation.
Also, move down the vaUnmapBuffer() call. This call actually "unmaps"
the param pointer, so accessing it after the unmap call would be
undefined behavior. The "example" in <va/vavpp.h> does this too, but
it's most likely an error.
(Additionally, not even bob deinterlacing worked correctly in my test,
sigh.)
MP_IMGFIELD_TOP/MP_IMGFIELD_BOTTOM were completely unused, and
MP_IMGFIELD_ORDERED was always set (even though vf_vdpaupp.c strangely
checked for the latter).
Vapoursynth made an incompatible API change: clips with unknown length
are not supported anymore. In fact, Vapoursynth abort()s the program
(which by the way invalidate all of its claims of API/ABI stability).
So add some nonsense to make it work again.
It's entirely useless, especially now that vo.c handles screenshots in a
generic way, and requires no special VO support. There are some
potential weird use-cases, but actually I've never seen it being used.
Use OPT_CHOICE_C() instead of the custom parser. The functionality is
pretty much equivalent.
(On a side note, it seems --video-stereo-mode can't be removed, because
it controls whether to "reduce" stereo video to mono, which is also the
default. In fact I'm not sure how this should be handled at all.)
Remove the colorspace-related top-level options, add them to vf_format.
They are rather obscure and not needed often, so it's better to get them
out of the way. In particular, this gets rid of the semi-complicated
logic in command.c (most of which was needed for OSD display and the
direct feedback from the VO). It removes the duplicated color-related
name mappings.
This removes the ability to write the colormatrix and related
properties. Since filters can be changed at runtime, there's no loss of
functionality, except that you can't cycle automatically through the
color constants anymore (but who needs to do this).
This also changes the type of the mp_csp_names and related variables, so
they can directly be used with OPT_CHOICE. This probably ended up a bit
awkward, for the sake of not adding a new option type which would have
used the previous format.
It was "by design" possible to make mpv crash if the parameters didn't
make enough sense, like "format=rgb24:yuv420p". While forcing the format
has some minor (rather questionable) use for debugging, allowing it to
crash is just stupid.
Handling this perfectly with VapourSynth is probably not possible: you
either need to tell it the total number of input frames in advance, or
deliver an infinite stream. With playback, EOF can happen at an
unpredictable point, for which the VapourSynth API has no mechanism at
all. We handle EOF by returning an error to the filter, which will the
filter return all pending frame callbacks.
We still can try to handle it approximately: if the filter requests a
frame past EOF, then send it an error. This seems to work relatively
well with filters which don't request future frames.
There's literally no reason why these functions have to be inline (they
might be performance critical, but then the function call overhead isn't
going to matter at all).
Uninline them and move them to mp_image.c. Drop the header file and fix
all uses of it.
Add filter parameters to VAAPI deinterlacing filter to actually process
bottom fields instead of deinterlacing top field twice.
Signed-off-by: wm4 <wm4@nowhere>
Filters which merely wrap libavfilter (for user-compatibility) like
vf_gradfun had a "lavfi-enable" suboption, which could disable
libavfilter usage. Since none of these filters has an internal
implementation anymore, this was completely useless.
Remove the confusing crap that allowed a filter using the libavfilter
bridge to be compiled without libavfilter. Instead, compile the wrappers
only if libavfilter is enabled at compile time.
The only filter which still requires it is vf_stereo3d (unfortunately).
Special-case this one. (The whole filter and how it interacts with lavfi
is pure braindeath anyway.)
This was apparently useful for correct interlaced scaling (although I
don't know anyone who used this). It was rarely used (if at all), had an
inconvenient output format (packed YUV), and now has a better solution
in libavfilter (using the libavfilter "scale" filter via vf_lavfi).
There is no reason to keep this filter any longer.
It's entirely useless. I left it in for a while, because the analog TV
code had a transitional bug that could switch chroma planes, but it was
fixed long ago. It's also available in libavfilter.
Apparently it was completely broken and essentially did nothing. This
was broken sometime in early mpv or mplayer2 times.
Get rid of it. If you _really_ need it, wait until FFmpeg ports it from
MPlayer, which will happen very soon.
Use different VOCTRLs for "window" and normal screenshot modes. The
normal one will probably be removed, and replaced by generic code in
vo.c, and this commit is preparation for this. (Doing it the other way
around would be slightly simpler, but I haven't decided yet about the
second one, and touching every VO is needed anyway in order to remove
the unneeded crap. E.g. has_osd has been unused for a long time.)
Before this commit, each hw backend had their own specific struct types
for context, and some, like VDA, had none at all. Add a context struct
(mp_hwdec_ctx) that provides a somewhat generic way to pass the hwdec
context around. Some things get slightly better, some slightly more
verbose.
mp_hwdec_info is still around; it's still needed, but is reduced to its
role of handling delayed loading of the hwdec backend.
And remove all uses of the VFCAP_CSP_SUPPORTED* constants. This is
supposed to reduce conversions if many filters are used (with many
incompatible pixel formats), and also for preferring the VO's natively
supported pixel formats (as opposed to conversion).
This is worthless by now. Not only do the main VOs not use software
conversion, but also the way vf_lavfi and libavfilter work mostly break
the way the old MPlayer mechanism worked. Other important filters like
vf_vapoursynth do not support "proper" format negotation either.
Part of this was already removed with the vf_scale cleanup from today.
While I'm touching every single VO, also fix the query_format argument
(it's not a FourCC anymore).
If video output and VO don't support the same format, a conversion
filter needs to be insert. Since a VO can support multiple formats, and
the filter chain also can deal with multiple formats, you basically have
to pick from a huge matrix of possible conversions.
The old MPlayer code had a quite naive algorithm: it first checked
whether any conversion from the list of preferred conversions matched,
and if not, it was falling back on checking a hardcoded list of output
formats (more or less sorted by quality). This had some unintended side-
effects, like not using obvious "replacement" formats, selecting the
wrong colorspace, selecting a bit depth that is too high or too low, and
more.
Use avcodec_find_best_pix_fmt_of_list() provided by FFmpeg instead. This
function was made for this purpose, and should select the "best" format.
Libav provides a similar function, but with a different name - there is
a function with the same name in FFmpeg, but it has different semantics
(I'm not sure if Libav or FFmpeg fucked up here).
This also removes handling of VFCAP_CSP_SUPPORTED vs.
VFCAP_CSP_SUPPORTED_BY_HW, which has no meaning anymore, except possibly
for filter chains with multiple scale filters.
Fixes#1494.
This adds an "auto" choice to the concurrent-frames suboption, and makes
it the default.
I'm not so sure about making this the default, though. It could lead to
excessive buffering with large CPU counts. But we'll see.
This is basically a hack; but apparently a needed one, since many
vapoursynth filters insist on having a FPS set.
We need to apply the FPS override before creating the filters. Also
change some terminal output related to the FPS value.
Most of this is explained in the code comments. This change should
improve performance with vapoursynth, especially if concurrent requests
are used.
This should change nothing if vf_vapoursynth is not in the filter chain,
since non-threaded filters obviously can not asynchronously finish
filtering of frames.
If a filter exists, but has no metadata, just return success. This
allows the user to distinguish between no metadata available, and filter
not inserted.
See #1408.
This was required by vf_pp, which was just removed.
vf_dlopen has this stuff in its API. This API is considered stable, so
the related fields are not removed from it. But the fields are always 0
now, so there's no point in keeping the example program around.
vf_pullup.c did some extremely awkward passthrough of this information,
but didn't actually use it.
This is an ancient filter, and we assume it's not useful anymore.
If you really want this, it's still available in libavfilter (e.g. via
--vf=lavfi=[pp...]). The disadvantage is that mpv doesn't pass through
QP information to libavfilter. (This was probably the reason vf_pp still
was part of mpv - it was slightly easier to pass QP internally.)
Remove the extra vf_chain.output field - there's absolutely no need for
it, because there is always a last filter which will buffer the output.
For some reason, vf_chain.last was never set, which we now need to fix
too.
The previous fix breaks another obscure case: if the second vf_sub adds
margins, the image is accidentally not extended, which would return in
an assertion failure when returning the bogus image.
In theory, vsscript should be doing it, but it's not there yet, neither
did there seem to be any interest in making it flexible enough to handle
more than 1 scripting language.
Some VS filters will requests frames from their parent filters while
they're initialized. Thy do this in a blocking manner, and
initialization will not succeed until the frame request is satisfied.
This deadlocked mpv, because we can feed frames to the filter only after
initialization is finished.
Return an error instead of deadlocking.
Note that we (probably) can handle frames being requested during init
fine, as long as the requests don't block initialization. But we can
distinguish this situation, and a simple test seems to indicate VS
usually doesn't do this.
See #1168.
We inserted these filters with fixed parameters, which was ok. But this
also didn't change image parameters for the filters down the filter
chain and the VO. For example, if rotation by 90° was requested by the
file, we would insert a filter and rotate the video, but the VO would
still receive image parameters that direct rotation by 90°.
This wasn't a problem, but it could become one.
Fix this by letting the filters automatically pick up the image params.
The image params are reset on application. (We could probably also
always try to apply and reset image params in a filter, instead of
having special "auto" parameters. This would probably work, and video.c
would insert a "rotate=0" filter. But I'm afraid this would be confusing
and the current solution is cosmetically slightly nicer.)
Unfortunately, the vf_stereo3d.c change turned out a big mess, but once
the "internal" filter is fully replaced with libavfilter, most of this
can be radically simplified.
Some filters exists only to create a specific lavfi graph. Allow these
filters to reset the graph exactly on reconfig, and allow them to modify
some image parameters too. Also make vf_lw_update_graph() behave like
vf_lw_set_graph() - they had a subtitle difference with filter==NULL.
Useful for the following commit.
This was once central, but now it's almost unused. Only vf_divtc still
uses it for extremely weird and incomprehensible reasons. The use in
stream.c is trivial. Replace these, and remove mpbswap.h.
Until now, we always required the playback core to decode a new frame to
get more output from the filter. That seems to be completely
unnecessary, because filtered results may arrive before that.
Add a filter_out callback, and restructure the code such that it can
return any filtered frames, or block if it hasn't read at least one
frame.
In the worst case, it still can happen that bursts of input requests and
output requests happen. (This commit tries to reduce burst-like
behavior, but it's not entirely possible due to the indeterministic
nature of VS threading.)
This is a similar change as with 95bb0bb6.
Uses the new mechanism introduced in the previous commit.
Depending on the actual filter, this distributes CPU load more evenly
over time, although it probably doesn't matter.
Consider a filter which turns 1 frame into 2 frames (such as an
deinterlacer). Until now, we forced filters to produce all output frames
at once. This was done for simplicity.
Change the filter API such that a filter can produce frames
incrementally.
This inserts an automatic conversion filter if a Matroska file is marked
as 3D (StereoMode element). The basic idea is similar to video rotation
and colorspace handling: the 3D mode is added as a property to the video
params. Depending on this property, a video filter can be inserted.
As of this commit, extending mp_image_params is actually completely
unnecessary - but the idea is that it will make it easier to integrate
with VOs supporting stereo 3D mogrification. Although vo_opengl does
support some stereo rendering, it didn't support the mode my sample file
used, so I'll leave that part for later.
Not that most mappings from Matroska mode to vf_stereo3d mode are
probably wrong, and some are missing.
Assuming that Matroska modes, and vf_stereo3d in modes, and out modes
are all the same might be an oversimplification - we'll see.
See issue #1045.
bstr.c doesn't really deserve its own directory, and compat had just
a few files, most of which may as well be in osdep. There isn't really
any justification for these extra directories, so get rid of them.
The compat/libav.h was empty - just delete it. We changed our approach
to API compatibility, and will likely not need it anymore.
Add two new script environment variables 'video_in_dw' and
'video_in_dh', representing the display resolution of video. Along
with video resolution, sample ratio aspect can be calculated in
scripts.
Currently it's impossible to change sample ratio aspect with single
vapoursynth filter since '_SARNum' and '_SARDen' frame properties
from output clip will be ignored. A following 'dsize' filter is
necessary for this purpose.
Use OPT_KEYVALUELIST() for all places where AVOptions are directly set
from mpv command line options. This allows escaping values, better
diagnostics (also no more "pal"), and somehow reduces code size.
Remove the old crappy option parser (av_opts.c).
The final goal is all mp_msg calls produce complete lines. We want this
because otherwise, race conditions could corrupt the terminal output,
and it's inconvenient for the client API too. This commit works towards
this goal. There's still code that has this not fixed yet, though.
When seeking, we violently destroy the filter, because vapoursynth has
no proper API for terminating a video with unknown frame count. This
looks like an error to vapoursynth, and the error is returned via the
frame callbacks. The bug is that we remember this error state across
reinitialization, so on the first filter call after reinitialization, we
thought filtering the current frame failed. This caused a shift by 1
frame on each seek.
CC: @mpv-player/stable
Make sure every video filter has valid parameters for input and output.
(This also ensures we don't take possibly invalid decoder output, or
feed invalid decodr/filter output to VOs.)
Also, the updated image size check now (almost) works like the
corresponding check in FFmpeg.
Until now, failure to allocate image data resulted in a crash (i.e.
abort() was called). This was intentional, because it's pretty silly to
degrade playback, and in almost all situations, the OOM will probably
kill you anyway. (And then there's the standard Linux overcommit
behavior, which also will kill you at some point.)
But I changed my opinion, so here we go. This change does not affect
_all_ memory allocations, just image data. Now in most failure cases,
the output will just be skipped. For video filters, this coincidentally
means that failure is treated as EOF (because the playback core assumes
EOF if nothing comes out of the video filter chain). In other
situations, output might be in some way degraded, like skipping frames,
not scaling OSD, and such.
Functions whose return values changed semantics:
mp_image_alloc
mp_image_new_copy
mp_image_new_ref
mp_image_make_writeable
mp_image_setrefp
mp_image_to_av_frame_and_unref
mp_image_from_av_frame
mp_image_new_external_ref
mp_image_new_custom_ref
mp_image_pool_make_writeable
mp_image_pool_get
mp_image_pool_new_copy
mp_vdpau_mixed_frame_create
vf_alloc_out_image
vf_make_out_image_writeable
glGetWindowScreenshot
This affects packed RGB formats up to 16 bits per pixel. The old mplayer
names used LSB-to-MSB order, while FFmpeg (and some other libraries) use
MSB-to-LSB.
Nothing should change with this commit, i.e. no bit order or endian bugs
should be added or fixed. In some cases, the name stays the same, even
though the byte order changes, e.g. RGB8->BGR8 and BGR8->RGB8, and this
affects the user-visible names too; this might cause confusion.
These suffixes are annoying when they're redundant, so strip them
automatically. On little endian machines, always strip the "le" suffix,
and on big endian machines vice versa (although I don't think anyone
ever tried to run mpv on a big endian machine).
Since pixel format strings are returned by a certain function and we
can't just change static strings, use a trick to pass a stack buffer
transparently. But this also means the string can't be permanently
stored by the caller, so vf_dlopen.c has to be updated. There seems
to be no other case where this is done, though.
While I'm not very fond of "const", it's important for declarations
(it decides whether a symbol is emitted in a read-only or read/write
section). Fix all these cases, so we have writeable global data only
when we really need.
Additionally to removing the global variables, this makes the options
more uniform. --ssf-... becomes --sws-..., and --sws becomes --sws-
scaler. For --sws-scaler, use choices instead of magic integer values.
It could in theory happen that the filter loop will enter a blocking
wait, even though it could make progress by emptying the list of
already-filtered images. I'm not quite sure if this could actually cause
a real issue - probably not.
VapourSynth won't just filter multiple frames at once on its own. You
have to request multiple frames at once manually. This is what this
commit introduces: a sub-option controls how many frames will be
requested at once. This also changes the semantics of the maxbuffer sub-
option, now renamed to buffered-frames.
This was a minor code duplication between vf_vdpaupp.c and vo_vdpau.c.
(In theory, we could always require using vf_vdpaupp with vo_vdpau, but
I think it's better if vo_vdpau can work standalone.)
vf_fix_img_params() takes care of overwriting image parameters that are
normally not set correctly by filters. But this makes no sense for input
images. So instead, check that the input is correct.
It still has to be done for the first input image, because that's used
to handle some overrides (see video_reconfig_filters()).
These replace vf_read_output_frame(), although we still emulate that
function. This change is preparation for another commit (and this is
basically just to reduce the diff and signal/noise ratio in that
commit).
Basically, if we feed the filter a new image even after the EOF state
has been reached (e.g. because the input stream "recovered"), we want
the filter to restart, instead of returning an error forever.
Some non-deinterlacing filters (potentially denoising) also use
additional frames for filtering. The vdpau docs suggest providing at
least 1 future and 2 past _fields_, which means we need to provide 1
past frame (the future field is already the other field of the current
field, and both fields are in the same frame).
We can easily achieve this by buffering an additional frame in the non-
deint case.
This factors out some code from vo_vdpau.c, especially deinterlacing
handling. The intention is to use this for vo_vdpau.c to make the logic
significantly easier, and to use it for vo_opengl (gl_hwdec_vdpau.c) to
allow selecting deinterlace and postprocessing modes.
As of this commit, the filter actually does nothing, since both vo_vdpau
and vo_opengl treat the generated images as normal vdpau images. This
will change in the following commits.