Since m_option.h and options.h are extremely often included, a lot of
files have to be changed.
Moving path.c/h to options/ is a bit questionable, but since this is
mainly about access to config files (which are also handled in
options/), it's probably ok.
The tmsg stuff was for the internal gettext() based translation system,
which nobody ever attempted to use and thus was removed. mp_gtext() and
set_osd_tmsg() were also for this.
mp_dbg was once enabled in debug mode only, but since we have log level
for enabling debug messages, it seems utterly useless.
This code tried to pass a still monotonic (even if not strictly
monotonic) PTS to the player, but as a result it remained stuck on
the PTS before a reset (since the PTS was lower).
Until now, the player didn't care to drain frames on video reconfig.
Instead, the VO was reconfigured (i.e. resized) before the queued frames
finished displaying. This can for example be observed by passing
multiple images with different size as mf:// filename. Then the window
would resize one frame before image with the new size is displayed. With
--vo=vdpau, the effect is worse, because this VO queues more than 1
frame internally.
Fix this by explicitly draining buffered frames before video reconfig.
Raise the display time of the last frame. Otherwise, the last frame
would be shown for a very short time only. This usually doesn't matter,
but helps when playing image files. This is a byproduct of frame
draining, because normally, video timing is based on the frames queued
to the VO, and we can't do that with frames of different size or format.
So we pretend that the frame before the change is the last frame in
order to time it. This code is incorrect though: it tries to use the
framerate, which often doesn't make sense. But it's good enough to test
this code with mf://.
This should help fixing some issues (like not draining video frames
correctly on reinit), as well as decoupling the decoder, filter chain,
and VO code.
I also wanted to make the hardware video decoding fallback work properly
if software-only video filters are inserted. This currently has the
issue that the fallback is too violent, and throws away a bunch of
demuxer packets needed to restart software decoding properly. But
keeping "backup" packets turned out as too hacky, so I'm not doing this,
at least not yet.
This adds vf_chain, which unlike vf_instance refers to the filter chain
as a whole. This makes the filter API less awkward, and will allow
handling format negotiation better.
The --flip option flipped the image upside-down, by trying to use VO
support, or if not available, by inserting a video filter. I'm not sure
why it existed. Maybe it was important in ancient times when VfW based
decoders output an image this way (but even then, flipping an image is a
free operation by negating the stride).
One nice thing about this is that it provided a possible path for
implementing video orientation, which is a feature we should probably
support eventually. The important part is that it would be for free for
VOs that support it, and would work even with hardware decoding.
But for now get rid of it. It's useless, trivial, stands in the way, and
supporting video orientation would require solving other problems first.
So, FFmpeg/Libav requires us to figure out video timestamps ourselves
(see last 10 commits or so), but the methods it provides for this aren't
even sufficient. In particular, everything that uses AVI-style DTS (avi,
vfw-muxed mkv, possibly mpeg4-in-ogm) with a codec that has an internal
frame delay is broken. In this case, libavcodec will shift the packet-
to-image correspondence by the codec delay, meaning that with a delay=1,
the first AVFrame.pkt_dts is not 0, but that of the second packet. All
timestamps will appear shifted. The start time (e.g. the time displayed
when doing "mpv file.avi --pause") will not be exactly 0.
(According to Libav developers, this is how it's supposed to work; just
that the first DTS values are normally negative with formats that use
DTS "properly". Who cares if it doesn't work at all with very common
video formats? There's no indication that they'll fix this soon,
either. An elegant workaround is missing too.)
Add a hack to re-enable the old PTS code for AVI and vfw-muxed MKV.
Since these timestamps are not reorderd, we wouldn't need to sort them,
but it's less code this way (and possibly more robust, should a demuxer
unexpectedly output PTS).
The original intention of all the timestamp changes recently was
actually to get rid of demuxer-specific hacks and the old timestamp
sorting code, but it looks like this didn't work out. Yet another case
where trying to replace native MPlayer functionality with FFmpeg/Libav
led to disadvantages and bugs. (Note that the old PTS sorting code
doesn't and can't handle frame dropping correctly, though.)
Bug reports:
https://trac.ffmpeg.org/ticket/3178https://bugzilla.libav.org/show_bug.cgi?id=600
Using --start with files that use DTS only, or which simply have broken
PTS timestamps, would incorrectly drop frames and possibly not execute
the seek correctly.
Add yet another heuristic to detect this. The intent is that --start and
hr-seeks in general should work correctly, but in order to keep things
fast, we still want to allow frame dropping during hr-seek if there are
no problems doing so. Do this by disabling frame dropping by default,
but re-enabling it if there are no problems found for a while. As a
consequence, --start might be somewhat slower, but normal user
interaction should remain as fast as before.
Note that there's something subtle about the added code: the
has_broken_packet_pts field is checked even before the first packet is
fed to dec_video.c, so the field must not be set to 0 right on start.
It's not initially set to 0 anyway, because the heuristic requires
decoding some images before enabling frame drop anyway.
Note 2: it's not clear whether frame dropping during hr-seek really
helps; I didn't benchmark it.
The d_video->pts field was a bit strange. The code overwrote it multiple
times (on decoding, on filtering, then once again...), and it wasn't
really clear what purpose this field had exactly. Replace it with the
mpctx->video_next_pts field, which is relatively unambiguous.
Move the decreasing PTS check to dec_video.c. This means it acts on
decoder output, not on filter output. (Just like in the previous commit,
assume the filter chain is sane.) Drop the jitter vs. reset semantics;
the dec_video.c determined PTS never goes backwards, and demuxer
timestamps don't "jitter".
Also get rid of the PTS check _after_ filters. This means if there's a
video filter which unsets PTS, no warning will be printed. But we assume
that all filters are well-behaved enough by now.
Refactor the PTS handling code to make it cleaner, and to separate the
bits that use PTS sorting.
Add a heuristic to fall back to DTS if the PTS us non-monotonic. This
code is based on what FFmpeg/Libav use for ffplay/avplay and also
best_effort_timestamp (which is only in FFmpeg). Basically, this 1. just
uses the DTS if PTS is unset, and 2. ignores PTS entirely if PTS is non-
monotonic, but DTS is sorted.
The code is pretty much the same as in Libav [1]. I'm not sure if all of
it is really needed, or if it does more than what the paragraph above
mentions. But maybe it's fine to cargo-cult this.
This heuristic fixes playback of mpeg4 in ogm, which returns packets
with PTS==DTS, even though the PTS timestamps should follow codec
reordering. This is probably a libavformat demuxer bug, but good luck
trying to fix it.
The way vd_lavc.c returns the frame PTS and DTS to dec_video.c is a bit
inelegant, but maybe better than trying to mess the PTS back into the
decoder callback again.
[1] https://git.libav.org/?p=libav.git;a=blob;f=cmdutils.c;h=3f1c667075724c5cde69d840ed5ed7d992898334;hb=fa515c2088e1d082d45741bbd5c05e13b0500804#l1431
These used the suffix _resync_stream, which is a bit misleading. Nothing
gets "resynchronized", they really just reset state.
(Some audio decoders actually used to "resync" by reading packets for
resuming playback, but that's not the case anymore.)
Also move the function in dec_video.c to the top of the file.
This means the code that tries to figure out the timestamp from
demuxer and decoder output is now all in dec_video.c. We set the
final timestamp on the returned image (mp_image.pts), as well as
the d_video->pts field.
The way the player uses d_video->pts field is still a bit messy. Maybe
this could be cleaned up later.
It appears PTS sorting was useful only for avi files (and VfW-muxed
mkv). Maybe it was historically also important for decoders with broken
or non-existent PTS reordering (win32 codecs?). But now that we handle
demuxers which outputs DTS only correctly, it just seems dead weight.
Disable it by default. The --pts-association-mode option is now forced
to always use the decoder's PTS value. You can still enable the old
default (auto) or force sorting. But we will probably remove this option
entirely at some point.
Make demux_mkv export timestamps at DTS when it's in VfW mode. This is
needed to get correct timestamps with the new default mode. demux_lavf
already does that.
Now the --no-correct-pts mode is like the normal mode, just with
different timestamp calculations. The semantics should be about the
same as before this commit.
Instead of passing the PTS as separate field, pass it as part of the
usual data structures. Basically, this removes strange artifacts from
the API. (It's not finished, though: the final decoded PTS goes through
strange paths, and filter_video() finally overwrites the decoded
mp_image's pts field with it.)
We also stop using libavcodec's reordered_opaque fields, and use
AVPacket.pts and AVFrame.pkt_pts. This is slightly unorthodox, because
these pts fields are not "really" opaque anymore, yet we treat them as
such. But the end result should be the same, and reordered_opaque is
marked as partially deprecated (it's not clear whether it's really
deprecated).
Now the actual decoder doesn't need to care about this anymore, and it's
handled in generic code instead. This simplifies vd_lavc.c, and in
particular we don't need to detect format changes in the old way
anymore.
The only reason why these structs were dynamically allocated was to
avoid recursive includes in stheader.h, which is (or was) a very central
file included by almost all other files. (If a struct is referenced via
a pointer type only, it can be forward referenced, and the definition of
the struct is not needed.) Now that they're out of stheader.h, this
difference doesn't matter anymore, and the code can be simplified.
Also sneak in some sanity checks.
This is similar to the sh_audio commit.
This is mostly cosmetic in nature, except that it also adds automatical
freeing of the decoder driver's state struct (which was in
sh_video->context, now in dec_video->priv).
Also remove all the stheader.h fields that are not needed anymore.
This drops the --pp option, which was probably broken for a while. The
option automatically inserted the "pp" filter. The value passed to it
was ignored (which is probably broken, it always selected maximal
quality).
Inserting this filter can be done simply with --vf=pp, so this is not
needed anymore.
Until now, video output levels (obscure feature, like using TV screens
that require RGB output in limited range, similar to YUY) still required
handling of VOCTRL_SET_YUV_COLORSPACE. Simplify this, and use the new
mp_image_params code. This gets rid of some code. VOCTRL_SET_YUV_COLORSPACE
is not needed at all anymore in VOs that use the reconfig callback. The
result of VOCTRL_GET_YUV_COLORSPACE is now used only used for the
colormatrix related properties (basically, for display on OSD). For
other VOs, VOCTRL_SET_YUV_COLORSPACE will be sent only once after config
instead of twice.
Instead of handling colorspaces with VFCTRLs/VOCTRLs, make them part of
the normal video format negotiation. The colorspace is passed down like
other video params with config/reconfig calls.
Forcing colorspaces (via the --colormatrix options and properties) is
handled differently too: if it's changed, completely reinit the video
chain. This is slower and requires a precise seek to the same position
to perform an update, but it's simpler and less bug-prone. Considering
switching the colorspace at runtime by user-interaction is a rather
obscure feature, this is a good change.
The colorspace VFCTRLs and VOCTRLs are still kept. The VOs rely on it,
and would have to be changed to get rid of them. We'll do that later,
and convert them incrementally instead of in one go.
Note that controlling the output range now always works on VO level.
Basically, this means you can't get vf_scale to output full-range YUV
for whatever reason. If that is really wanted, it should be a vf_scale
option. the previous behavior didn't make too much sense anyway.
This commit fixes a few bugs (such as playing RGB video and converting
that to YUV with vf_scale - a recent commit broke this and forced the
VO to display YUV as RGB if possible), and might introduce some new
ones.
Guess the colorspace directly in mpcodecs_reconfig_vo(), instead of in
set_video_colorspace(). The difference is that the latter function just
makes the video filter chain (and VOs) force the detected colorspace,
and then throws it away, while the former is a bit more general and
central. Not really a big difference and it doesn't matter much in
practice, but it guarantees that there is no internal disagreement about
the colorspace.
libavcodec generally shouldn't have this problem anymore (if libavcodec
ever had it). All other video decoders are gone. In any case, if this
commit actually causes regressions, these are libavcodec bugs and should
be fixed there instead.
Add the "vf" command, which allows changing the video filter chain at
runtime. For example, the 'y' key could be bound to toggle deinterlacing
by adding 'y vf toggle yadif' to the input.conf.
Reconfiguring the video filter chain normally resets the VO, so that it
will be "stuck" until a new video frame is rendered. To mitigate this, a
seek to the current position is issued when the filter chain is changed.
This is done only if playback is paused, because normal playback will
show an actual new frame quickly enough.
If vdpau hardware decoding is used, filter insertion (whether it fails
or not) will break the video for a while. This is because vo_vdpau
resets decoding related things on vo_config().
Makes the code a bit simpler to follow, at least in the "modern"
decoding path (update_video_nocorrect_pts() is used with old demuxers,
which don't return proper packets and need further parsing, so this code
looks less simple now).
wm4
Stefano Pigozzi