This tells the demuxer thread that it should seek, instead of waiting
until the demuxer thread is ready.
Care has to be taken about the state between seek request and actual
seeking: newly demuxed packets have to be discarded. We can't just
flush when doing the actual seek, because the user thread could read
these packets.
I'm wondering if this could lead to issues due to relaxed ordering of
operations. But it should be fine, since seeking influences packet
reading only, and seeking is always strictly done before that.
Currently, this will have no advantages; unless audio is disabled. Then
seeking as well as normal playback can be non-blocking.
Instead of starting to fill the packet queue if at least 1 stream is
selected, wait until there is at least 1 stream had new packets
requested.
In theory this is cleaner, because it allows you to e.g. do a seek and
then reselect streams without losing packets. Seeking marks all streams
as inactive, and without this new logic, the thread would read new
packets anyway right after seek.
This fixes the same symptom as the previous commit, but when the demuxer
thread is enabled. In this case, if nothing was read from the demuxer,
the STREAM_CTRLs weren't updated either. To the player, this looked like
the stream cache was never making progress, so playback was kept paused.
It can happen that read_packet() doesn't read a packet, even if it
succeeds. Typically this is because a packet was read, but then thrown
away, because it's not part of a selected stream. The result would be a
bogus EOF condition.
Fix by explicitly checking for EOF.
In corner cases, it might be possible that a demux_read_packet_async()
call fails to make the demuxer thread to read more packets.
If a packet is queued, the function will simply return a packet, without
marking the stream as active. As a consequence, read_packet() might
decide not to read any further packets, and the demuxer will never read
a packet and wake up the playback thread.
This was originally done to align it with demux_read_packet() semantics;
just drop this.
demux_read_any_packet() attempts to call read_packet(), but if no stream
is active, it can decide not to read anything. The function will return
NULL, which implies EOF. Fix this by explicitly
setting demux_stream->active if needed.
Also use dequeue_packet() instead of demux_read_packet(), because it's
cleaner. (Shouldn't change behavior.)
Possibly fixes#938.
We told the demuxer that a pipe (if stream cache is enabled) is
seekable. This is because the stream cache is technically seekable, it's
just that seeking may fail at runtime if a non-cached byte range is
requested.
This caused libavformat to issue seeks on initialization (at least when
piping mp4 youtube videos). Initialization failed completely after
spamming tons of error messages.
So, if an unseekable stream is cached, tell the demuxer that the file is
not seekable. This gets reversed later (when printing a message about
caching an unseekable stream), so the user can still try his luck by
issuing a seek command. The important part is that libavformat
initialization will not take code paths that will unnecessarily seek for
whatever reasons.
CC: @mpv-player/stable: regression from 0.3.x
It was easy to get into a wakeup feedback loop on EOF. The reason that
EOF is complicated is that we try to retry reading when EOF is reached,
in case the EOF state actually disappears (e.g. when watching a
currently downloaded file).
This feature is probably worthless, since in practice you have to do a
seek to "unstuck" it anyway, but since the old code also did this, we
want to keep this behavior for now.
Avoid the feedback loop by introducing another EOF flag (last_eof), that
contains the actual previous EOF state, and is not overwritten when
retrying reading. Wakeup is skipped if the EOF state didn't change.
Also, actually call the wakeup callback when EOF is detected.
The line that adds "ds->active = false;" actually does nothing, but in
theory it's cleaner.
This adds a thread to the demuxer which reads packets asynchronously.
It will do so until a configurable minimum packet queue size is
reached. (See options.rst additions.)
For now, the thread is disabled by default. There are some corner cases
that have to be fixed, such as fixing cache behavior with webradios.
Note that most interaction with the demuxer is still blocking, so if
e.g. network dies, the player will still freeze. But this change will
make it possible to remove most causes for freezing.
Most of the new code in demux.c actually consists of weird caches to
compensate for thread-safety issues (with the previously single-threaded
design), or to avoid blocking by having to wait on the demuxer thread.
Most of the changes in the player are due to the fact that we must not
access the source stream directly. the demuxer thread already accesses
it, and the stream stuff is not thread-safe.
For timeline stuff (like ordered chapters), we enable the thread for the
current segment only. We also clear its packet queue on seek, so that
the remaining (unconsumed) readahead buffer doesn't waste memory.
Keep in mind that insane subtitles (such as ASS typesetting muxed into
mkv files) will practically disable the readahead, because the total
queue size is considered when checking whether the minimum queue size
was reached.
It can happen that demux_fill_buffer() adds more than 1 packet, and then
the packets would add up. Affects demux_disc.c only (nothing else uses
this function).
DVD and Bluray (and to some extent cdda) require awful hacks all over
the codebase to make them work. The main reason is that they act like
container, but are entirely implemented on the stream layer. The raw
mpeg data resulting from these streams must be "extended" with the
container-like metadata transported via STREAM_CTRLs. The result were
hacks all over demux.c and some higher-level parts.
Add a "disc" pseudo-demuxer, and move all these hacks and special-cases
to it.
(Again.)
This time, we simply make it event-based, as it should be. This is done
for both demuxer metadata and stream metadata.
For some ogg-over-icy streams, 2 updates are reported on stream start.
This is because libavformat reports an update right on start, while
including the same info in the "static" metadata. I don't know if that's
a bug or a feature.
It's unlikely that files with multiple audio tracks and with replaygain
actually happen, but this change might help avoid minor corner cases
with later changes.
Probably "needed" to get the correct alignment, although I'm not aware
of actual breakages or performance issues.
In fact we should probably always just allocate AVPackets, but for now
use the simple fix.
FFmpeg requires a bullshit padding after each input buffer, and they
just increased that padding without warning and without ABI or API bump.
We need this only in one file (although mp_image hardcodes something
similar, for which no FFmpeg API define is available), so drop our own
define.
Stop using it in most places, and prefer STREAM_CTRL_GET_SIZE. The
advantage is that always the correct size will be used. There can be no
doubt anymore whether the end_pos value is outdated (as it happens often
with files that are being downloaded).
Some streams still use end_pos. They don't change size, and it's easier
to emulate STREAM_CTRL_GET_SIZE using end_pos, instead of adding a
STREAM_CTRL_GET_SIZE implementation to these streams.
Make sure int64_t is always used for STREAM_CTRL_GET_SIZE (it was
uint64_t before).
Remove the seek flags mess, and replace them with a seekable flag. Every
stream must set it consistently now, and an assertion in stream.c checks
this. Don't distinguish between streams that can only be forward or
backwards seeked, since we have no such stream types.
stream.start_pos was needed for optical media only, and (apparently) not
for very good reasons. Just get rid of it.
For stream_dvd, we don't need to do anything. Byte seeking was already
removed from it earlier.
For stream_cdda and stream_vcd, emulate the start_pos by offsetting the
stream pos as seen by the rest of mpv.
The bits in discnav.c and loadfile.c were for dealing with the code
seeking back to the start in demux.c. Handle this differently by
assuming the demuxer is always initialized with the stream at start
position, and instead seek back if initializing the demuxer fails.
Remove the --sb option, which worked by modifying stream.start_pos. If
someone really wants this option, it could be added back by creating a
"slice" stream (actually ffmpeg already has such a thing).
Also remove MSGL_SMODE and friends.
Note: The indent in options.rst was added to work around a bug in
ReportLab that causes the PDF manual build to fail.
Instead, always use the mpctx->chapters array. Before this commit, this
array was used only for ordered chapters and such, but now it's always
populated if there are chapters.
Stream-level chapters (like DVD etc.) did potentially not have
timestamps for each chapter, so STREAM_CTRL_SEEK_TO_CHAPTER and
STREAM_CTRL_GET_CURRENT_CHAPTER were needed to navigate chapters. We've
switched everything to use timestamps and that seems to work, so we can
simplify the code and remove this old mechanism.
wm4
Martin Herkt
Kevin Mitchell
Alessandro Ghedini