Add dummy input and output filters to remove special cases in the format
negotiation code (af_fix_format_conversion() etc.). The output of the
filter chain is now negotiated in exactly the same way as normal
filters.
Negotiate setting the sample rate in the same way as other audio
parameters. As a side effect, the resampler is inserted at the start of
the filter chain instead of the end, but that shouldn't matter much,
especially since conversion and channel mixing are conflated into the
same filter (due to libavresample's API).
Anything this option did has been removed in the preceding 3 commits.
Note that even though these options sounded like a good idea (like
setting accuracy vs. speed tradeoffs), they were not really properly
implemented.
All this option did was deciding whether the resample filter was to be
insert at the beginning or end of the filter chain. Always do what the
option set for accuracy did. I doubt it makes much of a difference.
libavresample does most things in just one go anyway, so it won't
matter.
Dangerous and misleading. If it turns out that this is actually needed
to make certain setups work right, it should be added back in a better
way (in a way it doesn't cause random crashes).
The only thing this option did was changing the behavior of af_volume.
The option decided what sample format af_volume would use, but only if
the sample format was not already float. If the option was set, it would
default to float, otherwise to S16.
Remove use of the option and all associated code, and make af_volume
always use float (unless a af_volume specific sub-option is set).
Silence maximum value tracking. This message is printed when the filter
is destroyed, and it's slightly annoying. Was enabled due to enabling
float by default.
Switch the internal channel order to libavcodec's. If the channel number
mismatches at some point, use libavresample for up- or downmixing.
Remove the old af_pan automatic downmixing.
The libavcodec channel order should be equivalent to WAVEFORMATEX order,
at least nowadays. reorder_ch.h assumes that WAVEFORMATEX and libavcodec
might be different, but all defined channels have the same mappings.
Remove the downmixing with af_pan as well as the channel conversion with
af_channels from af.c, and prefer af_lavrresample for this. The
automatic downmixing behavior should be the same as before (if the
--channels option is set to 2, which is the default, the audio output
is forced to 2 channels, and libavresample does all downmixing).
Note that mpv still can't do channel layouts. It will pick the default
channel layout according to the channel count. This will be fixed later
by passing down the channel layout as well.
af_hrtf depends on the order of the input channels, so reorder to ALSA
(for which this code was written). This is better than changing the
filter code, which is more risky.
ao_pulse can accept waveext order directly, so set that as channel
mapping.
If format negotiation fails, and additional filters are inserted to fix
this, don't try to reinitialize the filter immediately. Instead, correct
the audio format, and let the caller retry.
Add a retry counter to af_reinit() to ensure that misbehaving filters
can't put the format negotiation into an endless loop.
Refactor to remove the duplicated format filter insertion code. Allow
other format converting filters to be inserted on format mismatches.
af_info.test_conversion checks whether conversion between two formats
would work with the given filter; do this to avoid having to insert
multiple conversion filters at once and such things. (Although this
isn't ideal: what if we want to avoid af_format for some conversions?
What if we want to split af_format in endian-swapping filters etc.?)
Prefer af_lavrresample for conversions that it supports natively,
otherwise let af_format handle the full conversion.
Make sure automatically inserted filters are removed on full reinit
(they are re-added later if they are really needed). Automatically
inserted filters were never explicitly removed, instead, it was
expected that redundant conversion filters detach themselves. This
didn't work if there were several chained format conversion filters,
e.g. s16le->floatle->s16le, which could result from repeated filter
insertion and removal. (format filters detach only if input format and
output format are the same.)
Further, the dummy filter (which exists only because af.c can't handle
an empty filter chain for some reason) could introduce bad conversions
due to how the format negotiation works. Change the code so that the
dummy filter never takes part on format negotiation. (It would be better
to fix format negotiation, but that would be much more complicated and
would involving fixing all filters.)
Simplify af_reinit() and remove the start audio filter parameter. This
means format negotiation and filter initialization is run more often,
but should be harmless.
The format was locked to s16. Extend it to accept all other ffmpeg
sample formats, and even allow different in- and output formats. The
generic filter code will still insert af_format on format mismatches,
though.
The change in af_scaletempo actually fixes a memory leak. af->data
contained a pointer to an allocated buffer, which was overwritten
during format negotiation. Set the format explicitly instead.
Consider:
mpv --volume 10 file1.mkv file2.mkv
Before this commit, the volume was reset to 10 when playing file2.mkv.
This was inconsistent to most other options. E.g. --brightness is a
rather similar case.
In general, settings should never be reset when playing the next file,
unless the option was explicitly marked file-local. This commit
corrects the behavior of the --volume and --mute options.
File local --volume still works as expected:
mpv --{ --volume 10 file1.mkv file2.mkv --}
This sets the volume always to 10 on playback start.
Move the m_config_leave_file_local() call down so that the mixer code
in uninit_player() can set the option volume and mute variables without
overwriting the global option values.
Another subtle issue is that we don't want to set volume if there's no
need to, which is why the user_set_volume/mute fields are introduced.
This is important because setting the volume might change the system
volume depending on other options.
Remove `af_resample` and `af_lavcresample`. The former is a mess while the
latter uses an API that was long deprecated in libavcodec and is now removed.
`af_lavrresample` rougly has the same features and structure of
`af_lavcresample`.
libswresample fallback by wm4.
The old names have been deprecated a while ago, but were needed for
supporting older ffmpeg/libav versions. The deprecated identifiers
have been removed from recent Libav and FFmpeg git.
This change breaks compatibility with Libav 0.8.x and equivalent
FFmpeg releases.
avcodec_encode_audio() was deprecated, and was finally removed from
Libav and FFmpeg git.
This appears to work. I get heavy A/V desync with -ao alsa and -ao pcm,
but this was already so before this change.
The spdif decoder was hardcoded to assume that the spdif output is
capable of accepting high (>1.5Mbps) bitrates. While this is true
for modern HDMI spdif interfaces, the original coax/toslink system
cannot deal with this and will fail to work.
This patch adds an option --dtshd which can be enabled if you use
a DTS-capable receiver behind a HDMI link.
The previous name of this filter was misleading, because it doesn’t actually
normalize volume levels. What it does is closer to performing low-quality
dynamic range compression, hence it is now called af_drc.
Instead of putting codec header data into WAVEFORMATEX and
BITMAPINFOHEADER, pass it directly via AVCodecContext. To do this, we
add mp_copy_lav_codec_headers(), which copies the codec header data
from one AVCodecContext to another (originally, the plan was to use
avcodec_copy_context() for this, but it looks like this would turn
decoder initialization into an even worse mess).
Get rid of the silly CodecID <-> codec_tag mapping. This was originally
needed for codecs.conf: codec tags were used to identify codecs, but
libavformat didn't always return useful codec tags (different file
formats can have different, overlapping tag numbers). Since we don't
go through WAVEFORMATEX etc. and pass all header data directly via
AVCodecContext, we can be absolutely sure that the codec tag mapping is
not needed anymore.
Note that this also destroys the "standard" MPlayer method of exporting
codec header data. WAVEFORMATEX and BITMAPINFOHEADER made sure that
other non-libavcodec decoders could be initialized. However, all these
decoders have been removed, so this is just cruft full of old hacks that
are not needed anymore. There's still ad_spdif and ad_mpg123, bu neither
of these need codec header data. Should we ever add non-libavcodec
decoders, better data structures without the past hacks could be added
to export the headers.
Rearrange some code to make it easier readable. Remove some dead code,
and stop printing AVI headers in demux_lavf. (These are not actual AVI
headers, just for internal use.)
There should be no functional changes, other than reducing output in
verbose mode.
Use codec names instead of FourCCs to identify codecs. Rewrite how
codecs are selected and initialized. Now each decoder exports a list
of decoders (and the codec it supports) via add_decoders(). The order
matters, and the first decoder for a given decoder is preferred over
the other decoders. E.g. all ad_mpg123 decoders are preferred over
ad_lavc, because it comes first in the mpcodecs_ad_drivers array.
Likewise, decoders within ad_lavc that are enumerated first by
libavcodec (using av_codec_next()) are preferred. (This is actually
critical to select h264 software decoding by default instead of vdpau.
libavcodec and ffmpeg/avconv use the same method to select decoders by
default, so we hope this is sane.)
The codec names follow libavcodec's codec names as defined by
AVCodecDescriptor.name (see libavcodec/codec_desc.c). Some decoders
have names different from the canonical codec name. The AVCodecDescriptor
API is relatively new, so we need a compatibility layer for older
libavcodec versions for codec names that are referenced internally,
and which are different from the decoder name. (Add a configure check
for that, because checking versions is getting way too messy.)
demux/codec_tags.c is generated from the former codecs.conf (minus
"special" decoders like vdpau, and excluding the mappings that are the
same as the mappings libavformat's exported RIFF tables). It contains
all the mappings from FourCCs to codec name. This is needed for
demux_mkv, demux_mpg, demux_avi and demux_asf. demux_lavf will set the
codec as determined by libavformat, while the other demuxers have to do
this on their own, using the mp_set_audio/video_codec_from_tag()
functions. Note that the sh_audio/video->format members don't uniquely
identify the codec anymore, and sh->codec takes over this role.
Replace the --ac/--vc/--afm/--vfm with new --vd/--ad options, which
provide cover the functionality of the removed switched.
Note: there's no CODECS_FLAG_FLIP flag anymore. This means some obscure
container/video combinations (e.g. the sample Film_200_zygo_pro.mov)
are played flipped. ffplay/avplay doesn't handle this properly either,
so we don't care and blame ffmeg/libav instead.
mpv -ao help and mpv -vo help shouldn't show the encoding outputs (named
"lavc" on both cases). Also make it impossible to select these manually
when not encoding.
On Linux, ao_portaudio has weird freezing issues (possibly specific to
the ALSA backend, though). Also ao_dsound is more likely to get multi-
channel audio output right, and ao_portaudio probably mangles these.
This partially reverts earlier decisions, when I thought it would
always be better to prefer the audio volume filter over the AO's,
because the AO's relies on the underlying audio-API, which could
be broken or exhibit unusual behavior (like it happened with ao_dsound).
However, since the audio buffer can be quite large (500 ms), and we
don't attempt to flush & refilter the audio on volume changes, always
prefer AO volume control (as long as the AO mixer doesn't control the
system mixer).
Also document what the mixer.c related AO fields mean (hopefully not
too brief).
Handle all pending events and exit instead of waiting. When there are lots of
input events (for example, scrolling with trackpad), timeout can add up
to make a huge frame delay. In my tests, if I scroll fast enough, that loop
would never exit.
This function sucks and apparently is not very portable (at least on
mingw, the configure check fails). Also remove the emulation of that
function from osdep/strsep*, and remove the configure check.
mixer_setvolume() accepts float values for volume, but used the
integer function av_clip() to limit range, losing the fractional part
as a side effect. Change the code to use av_clipf() instead. For most
uses this shouldn't make any real difference; actual AO volume
settings may not have that much precision anyway.
af_volnorm can process either int16_t or float audio data. The float
version used 0 to INT_MAX as full value range, when it should be 0 to
1. This effectively disabled the filter (due to all input being
considered to fall in the silence range). Fix.
Reported by Tobias Jacobi <liquid.acid@gmx.net>.
This causes trouble when a hw device is used:
pcm_hw.c:514:(snd_pcm_hw_delay) SNDRV_PCM_IOCTL_DELAY failed (-77): File descriptor in bad state
when running mpv test.mkv --ao=alsa:device=iec958,alsa and pausing
during playback.
Historically, mplayer usually did not call snd_pcm_delay() (which is
called by get_delay()) while paused, so this problem never showed up.
But at least mpv has changes that cause get_delay() to be called when
updating the status line (see commit 3f949cf).
It's possible that calling snd_pcm_delay() is not always legal when the
audio is paused, and at least fails with the error message mentioned
above is the device is a hardware device. Change get_delay() to return
the last delay before the audio was paused. The intention is to get a
continuous playback status display, even when pausing or frame stepping,
otherwise we could just return the audio buffer fill status in
get_delay() or even just 0 when paused.
Uses the same trick as the planarization code to turn per-sample memcpy
calls into mov instructions. Makes decoding a ~25min 48000Hz 2ch floatle
audio file faster from 3.8s to 2.7s.
This mainly serves as a fallback for platforms where nothing better is
available; also as a debugging help. Both the audio and video driver are
not first class - the audio driver lacks delay detection, and the video
driver only supports a single YUV color space.
Configure options: --disable-sdl2 to disable SDL 2.0+ detection,
--disable-sdl to disable SDL 1.2+ detection. Both options need to be
specified to turn off SDL support entirely.
Add `mp_find_config_file` to search different known paths and use that in
ass_mp to look for the fontconfig configuration file.
Some incidental changes spawned by this feature where:
* Buffer allocation for the strings containing the paths is now performed
with talloc. All of the allocations are done on a NULL context, but it still
improves readability of the code.
* Move the OSX function for lookup inside of a bundle: this code path was
currently not used by the bundle generated with `make osxbundle`. The plan
is to use it again in a future commit to get a fontconfig config file.
ad_dvdpcm reads MPEG specific headers directly (passed through codecdata
by demux_mpg), so you couldn't use ffmpeg's "pcm_dvd" with demux_mpg.
Change demux_mpg to set the correct audio parameters directly. The code
for this is taken from ad_dvdpcm.
ad_dvdpcm is evil because it still does partial packet reads (with
demux_read_data()), and it's redundant to libavcodec anyway.
Since libavcodec doesn't have a "generic" PCM decoder, we have to go out
of out way to make it look like ad_lavc provides one: make it provide a
pseudo "pcm" decoder, which maps some format tags manually to the
individual libavcodec PCM decoders.
Format tags which uniquely map to one libavcodec could be mapped via
codecs.conf. Since defining these in tag_map[] is much shorter (one line
vs. a full codec entry in codecs.conf), and since we need tag_map[]
anyway, we don't use codecs.conf for these.
ad_pcm is evil because it still does partial packet reads (with
demux_read_data()), and it's redundant to libavcodec anyway.
wm4
Stefano Pigozzi
Kovensky
Wessel Dankers
Martin
wm4
Mad Fish
Uoti Urpala
Rudolf Polzer