Change all OPT_* macros such that they don't define the entire m_option
initializer, and instead expand only to a part of it, which sets certain
fields. This requires changing almost every option declaration, because
they all use these macros. A declaration now always starts with
{"name", ...
followed by designated initializers only (possibly wrapped in macros).
The OPT_* macros now initialize the .offset and .type fields only,
sometimes also .priv and others.
I think this change makes the option macros less tricky. The old code
had to stuff everything into macro arguments (and attempted to allow
setting arbitrary fields by letting the user pass designated
initializers in the vararg parts). Some of this was made messy due to
C99 and C11 not allowing 0-sized varargs with ',' removal. It's also
possible that this change is pointless, other than cosmetic preferences.
Not too happy about some things. For example, the OPT_CHOICE()
indentation I applied looks a bit ugly.
Much of this change was done with regex search&replace, but some places
required manual editing. In particular, code in "obscure" areas (which I
didn't include in compilation) might be broken now.
In wayland_common.c the author of some option declarations confused the
flags parameter with the default value (though the default value was
also properly set below). I fixed this with this change.
Before this commit, option declarations used M_OPT_MIN/M_OPT_MAX (and
some other identifiers based on these) to signal whether an option had
min/max values. Remove these flags, and make it use a range implicitly
on the condition if min<max is true.
This requires care in all cases when only M_OPT_MIN or M_OPT_MAX were
set (instead of both). Generally, the commit replaces all these
instances with using DBL_MAX/DBL_MIN for the "unset" part of the range.
This also happens to fix some cases where you could pass over-large
values to integer options, which were silently truncated, but now cause
an error.
This commit has some higher potential for regressions.
This was mostly unused, and has certain problems. Just get rid of it.
It was still used in CDDA (--cdda-span) and a debug option for OpenGL
(--opengl-check-pattern). Replace both of these with 2 options, where
each sets the start/end values of the former span. Both were
undocumented somehow (normally we require all options to be documented),
so I'm not caring about compatibility, and not bothering to add it to
the API changelog.
This required libsmbclient, which is a heavy dependency, and as a
library, has all kinds of problems. For one, the API requires completely
unacceptable global state (in particular, leaks auth state), and is not
thread-safe (meaning concurrent reads to multiple files block each
other).
There are better replacements: you can use the Linux kernel's builtin
CIFS support, fusesmb, or contribute supoport for libdsm.
It appears using lseek() to seek to the end and back to determine file
size is inefficient in some cases.
With CIFS, this restores the performance regression that happened when
the stream cache was removed (which called read() from a thread). This
is probably faster than the old code too, because it's the seeking that
was slowing down CIFS.
According to the user who tested this, the size caching does not help
with fstat() (although it did with the old method).
Fixes: #7408, #7152
Libav seems rather dead: no release for 2 years, no new git commits in
master for almost a year (with one exception ~6 months ago). From what I
can tell, some developers resigned themselves to the horrifying idea to
post patches to ffmpeg-devel instead, while the rest of the developers
went on to greener pastures.
Libav was a better project than FFmpeg. Unfortunately, FFmpeg won,
because it managed to keep the name and website. Libav was pushed more
and more into obscurity: while there was initially a big push for Libav,
FFmpeg just remained "in place" and visible for most people. FFmpeg was
slowly draining all manpower and energy from Libav. A big part of this
was that FFmpeg stole code from Libav (regular merges of the entire
Libav git tree), making it some sort of Frankenstein mirror of Libav,
think decaying zombie with additional legs ("features") nailed to it.
"Stealing" surely is the wrong word; I'm just aping the language that
some of the FFmpeg members used to use. All that is in the past now, I'm
probably the only person left who is annoyed by this, and with this
commit I'm putting this decade long problem finally to an end. I just
thought I'd express my annoyance about this fucking shitshow one last
time.
The most intrusive change in this commit is the resample filter, which
originally used libavresample. Since the FFmpeg developer refused to
enable libavresample by default for drama reasons, and the API was
slightly different, so the filter used some big preprocessor mess to
make it compatible to libswresample. All that falls away now. The
simplification to the build system is also significant.
stream_seek() might somewhat show up in the profiler, even if it's a
no-OP, because of the MP_TRACE() call. I find this annoying. Otherwise,
this should be of no consequence, and should not break or improve
anything.
Some cache logic in demux.c queries the raw byte stream size on every
packet read. This is because it reports the value to the user. (It has
to be polled like this because there is no change notification in most
underlying I/O APIs, and also the user can't just block on the demuxer
thread to update it explicitly.)
This causes a very high number of get_size calls with low packet sizes,
so cache the size, and update it on every read. Reads only happen
approximately all 64KB read with default settings, which is way less
frequent than every packet in such extreme cases.
In theory, this could in theory cause problems in some cases. Actually
this is whole commit complete non-sense, because why micro-optimize for
broken cases like patent troll codecs. I don't need to justify it
anyway.
As a minor detail, off_t is actually specified as signed, so the off_t
cast is never needed.
Unfortunately, libarchive detects a stream of 0s as tar, as demonstrated
by "mpv /dev/zero". This is inconvenient in some cases.
One example is the .cue demuxer trying to open a raw audio .bin file,
which it allows only if probing fails (as .bin is raw and normally will
not look like any real file format). Although this use-case is
worthless.
The cdio API always reads in sectors (fixed CDIO_CD_FRAMESIZE_RAW
blocks). In the past, mpv/MPlayer streams had a way for a stream to
signal a sector size, so the stream's fill_buffer implementation could
ignore the length argument. Later, that was removed, but stream_cdda.c
was left with assuming that the read size was always larger than the
sector size (rightfully at the time). Even later, this assumption was
broken with commit f37f4de, when it was suddenly possibly that smaller
reads were performed (at ring buffer boundaries). It returned EOF if the
buffer size was too small, so playback stopped very early.
Fix this by explicitly handling arbitrary sizes.
Tested with a .cue/.bin file only.
Fixes: #7384
This reverts commit 1b0129c414.
It turns out most of the files affected by the idiotic use-case actually
use this old naming pattern, which I hoped was unused.
This means for now we'll always assume .rar files are multi-part (until
proven otherwise), but the following commit tries to fix this.
Seems like I'm still not done with rar playback stuff...
It turns out the reason for archive_read_open1() opening all volumes had
nothing to do with libarchive's rar code, but was a consequence of how
multi volume support is implemented in libarchive, and due to the fact
that we enabled archive_read_support_format_zip_seekable() (through
archive_read_support_format_zip()).
The seekable zip format will seek to the end of the file and search for
a zip "header" there. It could possibly be considered a libarchive bug
that it does that even if it's fairly sure that it's a RAR file.
We already do probing on a small buffer read from the start of the file
(i.e. not giving libarchive a way to seek the stream before we think
it's an archive), but that does not help, since libarchive needs to
probe _again_. libarchive does not seem to provide a function to query
the format (no archive_read_get_format()). Which seems quite strange,
but at least I didn't find one.
This commit works this around by doing some manual rar/zip probing. We
could have gone only with rar probing. But detecting zip separately
allows us to avoid that stream_libarchive seeks to the end during early
probing. This is an additional bonus on top of "fixing" multi volume
rar.
The zip probing is from archive_read_format_zip_streamable_bid(). The
rar signature is the common prefix of the rar and rar5 formats in
libarchive (presumably the RAR fixed header parts without version).
If the demuxer seeks to the end of the rar entry, this will still open
all volumes; I'm not sure whether the old/removed rar code in mpv could
handle this better.
See: #7182
Well that was too much misery when trying to deal with an idiotic
feature, so it had to be compensated for.
Replace insults with proper explanation, libarchive sort of isn't guilty
in the first place, and their format support is pretty good all things
considered.
This turned every "normal" .rar filename into a multi-volume one
accidentally. Since the detection is purely by filename (due to lack of
support by libarchive I guess), it causes the nasty message added in the
previous commit to appear for every .rar file. Just drop it.
See manpage additions. The libarchive behavior mentioned in the last
paragraph there is technically unrelated, but makes this new option
mostly pointless.
See: #7182
Instead of opening every volume on start just to see if it's there, all
all volumes that could possibly exist, and "handle" it on opening. This
requires working around some of libarchive's amazing stupidity and using
some empirically determined behavior. Will possibly break if libarchive
changes some of this behavior.
See: #7182
We whitelist formats (and not all of them). RAR v5 is a separated format
entry for inexplicable reasons. (It's a separate implementation, but who
really wants to support only either of the rar formats?)
I'm not sure if it was libarchive 3.3.3. Their git history is absolutely
chaotic. These people do not know how to use git. I couldn't be bothered
to dig deeper.
Make concat streams use the "worst" origin of its parts, which may or
may not be what makes sense. stream_memory has no natural way to do
this, so just add a vague comment.
mpv has a very weak and very annoying policy that determines whether a
playlist should be used or not. For example, if you play a remote
playlist, you usually don't want it to be able to read local filesystem
entries. (Although for a media player the impact is small I guess.)
It's weak and annoying as in that it does not prevent certain cases
which could be interpreted as bad in some cases, such as allowing
playlists on the local filesystem to reference remote URLs. It probably
barely makes sense, but we just want to exclude some other "definitely
not a good idea" things, all while playlists generally just work, so
whatever.
The policy is:
- from the command line anything is played
- local playlists can reference anything except "unsafe" streams
("unsafe" means special stream inputs like libavfilter graphs)
- remote playlists can reference only remote URLs
- things like "memory://" and archives are "transparent" to this
This commit does... something. It replaces the weird stream flags with a
slightly clearer "origin" value, which is now consequently passed down
and used everywhere. It fixes some deviations from the described policy.
I wanted to force archives to reference only content within them, but
this would probably have been more complicated (or required different
abstractions), and I'm too lazy to figure it out, so archives are now
"transparent" (playlists within archives behave the same outside).
There may be a lot of bugs in this.
This is unfortunately a very noisy commit because:
- every stream open call now needs to pass the origin
- so does every demuxer open call (=> params param. gets mandatory)
- most stream were changed to provide the "origin" value
- the origin value needed to be passed along in a lot of places
- I was too lazy to split the commit
Fixes: #7274
This has the advantage that playlists within the archive will work as
expected, because demux_playlist will correctly join the archive base
URL and entry name. Before this change, it could skip before the "|",
resulting in a broken URL.
This warning seems to be designed well. It doesn't seem to warn on
fallthrough-only case statements, so it's compatible to well written
code.
stream_dvdnav.c had an obscure bug in inactive code, fix it.
stream_dvb.c is the only place where it intentionally falls through, I
guess I'll just leave it alone.
This is preparation to get rid of the option-to-property bridge
(mp_on_set_option). This is a pretty insane thing that redirects
accesses to options to properties. It was needed in the ever ongoing
transition from something to... something else.
A good example for the need of this bridge is applying profiles at
runtime. This obviously goes through the config parser, but should also
make all changes effective, for which traditionally the property layer
is used.
There isn't much left that needs this bridge. This commit changes a
bunch of options (which also have a property implementation) to use
option change notifications instead. Many of the properties are still
left, but perform unrelated functions like OSD formatting.
This should be mostly compatible. There may be some subtle behavior
changes. For example, "hwdec" and "record-file" do not check for changes
anymore before applying them, so writing the current value to them
suddenly does something, while it was ignored before.
DVB changes untested, but should work.
Until now, we've made FFmpeg use the default network timeout - which is
apparently infinite. I don't know if this was changed at some point,
although it seems likely, as I was sure there was a more useful default.
For most use cases, a smaller timeout is more useful (for example
recording something in the background), so force a timeout of 1 minute.
See: #5793
stream_skip() semantics were kind of bad, especially after the recent
change to the stream code. Forward stream_skip() calls could still
trigger a seek and fail, even if it was supposed to actually skip data.
(Maybe the idea that stream_skip() should try to seek is worthless in
the first place.)
Rename it to stream_seek_skip() (takes absolute position now because I
think that's better), and make it always skip if the stream is marked as
forward.
While we're at it, make EOF detection more robust. I guess s->eof
shouldn't exist at all, since it's valid only "sometimes". It should be
removed... but not today. A 1-byte stream_read_peek() call is good to
get the s->eof flag set to a correct value.
It was set, but its value was never used. The stream cache used to use
it, but it was removed. It controlled how much data it tried to read
from the underlying stream at once.
The user can now control the buffer size with --stream-buffer-size,
which achieves a similar effect, because the stream will in the common
case read half of the buffer size at once. In fact, the new default size
is 128KB, i.e. 64KB read size, which is as much as stream_file and
stream_cb requested by default. stream_memory requested more, but it
doesn't matter anyway. Only stream_smb set a larger size with 128KB.
The dvdnav API reads in 2K blocks (dvdnav_get_next_block()). The mpv
wrapper (fill_buffer() in this file) expects that the read size done by
the mpv core is at least 2K for this reason. If not, it returns an
error.
This used to be OK, because there was a thing called section alignment
in the core code. This was removed because the core shouldn't suffer
from optical disc idiosyncrasies. Which means that ever since, it has
been working only by coincidence, or maybe not at all.
Fixing this would require keeping a buffer in the priv struct, and
returning it piece by piece if the core makes smaller reads. I have no
intention of writing such code, so add an error message asking for a
patch. If anyone actually cares about DVD, maybe it'll get fixed.
This isn't really needed, since it doesn't support byte seeking (only
for avoiding that demux_disc fucks up even more if the nested demux_lavf
tries to seek in the TS).
stream_read_peek() duplicated what stream_read_more() checks for anyway
(whether the forward buffer is large enough). This can be skipped by
making the stream_read_more() return value more consistent.
demux_mkv was the only thing using this, and everything else accessed it
directly. No need to keep the indirection wrapper around.
(Funny how this getter was in the initial commit of MPlayer.)
(Only half of the buffer is actually used in a useful way, see manpage
or commit which added the option.)
Might have some advantages with broken network filesystem drivers.
See: #6802
Was probably worthless, and I can't measure a difference anymore (I used
to be able and it still seemed worth doing so back then).
When the default buffer size is enlarged in the next commit, the inline
buffer probably won't even be useful in theory, because the data will
rarely be on the same page as the other stream fields. It surely makes
the inline buffer seem like a ridiculous micro-optimization. Farewell...
In some corner cases (see #6802), it can be beneficial to use a larger
stream buffer size. Use this as argument to rewrite everything for no
reason.
Turn stream.c itself into a ring buffer, with configurable size. The
latter would have been easily achievable with minimal changes, and the
ring buffer is the hard part. There is no reason to have a ring buffer
at all, except possibly if ffmpeg don't fix their awful mp4 demuxer, and
some subtle issues with demux_mkv.c wanting to seek back by small
offsets (the latter was handled with small stream_peek() calls, which
are unneeded now).
In addition, this turns small forward seeks into reads (where data is
simply skipped). Before this commit, only stream_skip() did this (which
also mean that stream_skip() simply calls stream_seek() now).
Replace all stream_peek() calls with something else (usually
stream_read_peek()). The function was a problem, because it returned a
pointer to the internal buffer, which is now a ring buffer with
wrapping. The new function just copies the data into a buffer, and in
some cases requires callers to dynamically allocate memory. (The most
common case, demux_lavf.c, required a separate buffer allocation anyway
due to FFmpeg "idiosyncrasies".) This is the bulk of the demuxer_*
changes.
I'm not happy with this. There still isn't a good reason why there
should be a ring buffer, that is complex, and most of the time just
wastes half of the available memory. Maybe another rewrite soon.
It also contains bugs; you're an alpha tester now.
wm4
Oliver Freyermuth