This was optional, with the intention that normally such options require
a valid format. But there is no reason for this (at least not anymore),
and it's actually more logical to accept "no" in all situations this
option type is used. This also gets rid of the weird min field special
use.
The "rule" is that a fallback warning message should be shown only shown
if software decoding was used before, or in other words when either
hwdec was enabled before, but the stream suddenly falls back, or it was
attempted to enable it at runtime, and it didn't work.
The message wasn't printed the first time in the latter case, because
hwdec_notified was not set in forced software decoding mode. Fix it with
this commit. Fortunately, the logic becomes simpler.
Change all OPT_* macros such that they don't define the entire m_option
initializer, and instead expand only to a part of it, which sets certain
fields. This requires changing almost every option declaration, because
they all use these macros. A declaration now always starts with
{"name", ...
followed by designated initializers only (possibly wrapped in macros).
The OPT_* macros now initialize the .offset and .type fields only,
sometimes also .priv and others.
I think this change makes the option macros less tricky. The old code
had to stuff everything into macro arguments (and attempted to allow
setting arbitrary fields by letting the user pass designated
initializers in the vararg parts). Some of this was made messy due to
C99 and C11 not allowing 0-sized varargs with ',' removal. It's also
possible that this change is pointless, other than cosmetic preferences.
Not too happy about some things. For example, the OPT_CHOICE()
indentation I applied looks a bit ugly.
Much of this change was done with regex search&replace, but some places
required manual editing. In particular, code in "obscure" areas (which I
didn't include in compilation) might be broken now.
In wayland_common.c the author of some option declarations confused the
flags parameter with the default value (though the default value was
also properly set below). I fixed this with this change.
Before this commit, option declarations used M_OPT_MIN/M_OPT_MAX (and
some other identifiers based on these) to signal whether an option had
min/max values. Remove these flags, and make it use a range implicitly
on the condition if min<max is true.
This requires care in all cases when only M_OPT_MIN or M_OPT_MAX were
set (instead of both). Generally, the commit replaces all these
instances with using DBL_MAX/DBL_MIN for the "unset" part of the range.
This also happens to fix some cases where you could pass over-large
values to integer options, which were silently truncated, but now cause
an error.
This commit has some higher potential for regressions.
Libav seems rather dead: no release for 2 years, no new git commits in
master for almost a year (with one exception ~6 months ago). From what I
can tell, some developers resigned themselves to the horrifying idea to
post patches to ffmpeg-devel instead, while the rest of the developers
went on to greener pastures.
Libav was a better project than FFmpeg. Unfortunately, FFmpeg won,
because it managed to keep the name and website. Libav was pushed more
and more into obscurity: while there was initially a big push for Libav,
FFmpeg just remained "in place" and visible for most people. FFmpeg was
slowly draining all manpower and energy from Libav. A big part of this
was that FFmpeg stole code from Libav (regular merges of the entire
Libav git tree), making it some sort of Frankenstein mirror of Libav,
think decaying zombie with additional legs ("features") nailed to it.
"Stealing" surely is the wrong word; I'm just aping the language that
some of the FFmpeg members used to use. All that is in the past now, I'm
probably the only person left who is annoyed by this, and with this
commit I'm putting this decade long problem finally to an end. I just
thought I'd express my annoyance about this fucking shitshow one last
time.
The most intrusive change in this commit is the resample filter, which
originally used libavresample. Since the FFmpeg developer refused to
enable libavresample by default for drama reasons, and the API was
slightly different, so the filter used some big preprocessor mess to
make it compatible to libswresample. All that falls away now. The
simplification to the build system is also significant.
Add an "auto-safe" mode, mostly triggered by Ubuntu's nonsense to force
hwdec=vaapi in the global config file in their mpv package. But to be
honest it's probably something more people want.
This is implemented as explicit whitelist. On Windows, HEVC/Intel is
sometimes broken, but it's still whitelisted, and in theory we'd need a
detailed whitelist of device names etc. (like for example browsers tend
to do). On OSX, videotoolbox is a pretty bad choice, but unfortunately
the only one, so it's whitelisted too. There may be a larger number of
hwdec wrappers that work anyway, and I'm for example ignoring Android.
libavcodec's nvdec wrapper can return invalid frames, that do not have
any data fields set. This is not allowed by the API, but why would they
follow their own API?
Add a workaround to specifically detect this situation. In practice,
this should fall back to software decoding if it happens too often in a
row. (But single errors are still tolerated, because I don't know why.)
Untested due to lack of hardware from the regrettable graphics company.
Better do this here than deal with the moronic project we unfortunately
depend on.
See: #7185
This assert() sometimes triggered (and still triggers) with lavc API
bugs. It tries to check that at least 1 plane is set to a non-NULL
value. Obviously, a valid frame returned by successful decoding should
never have it.
The problem is that some hwdecs use integer surface IDs cast to a
pointer. Recently, it happened that newer Intel drivers started using
surface ID 0 under certain circumstances (for unknown reasons), which
triggers this assert.
Just get rid of it.
For the sake of #7185, add an assert() specifically for nvdec. That
failure needs to be further analyzed, is probably a FFmpeg bug, and
without this assert() would just crash somewhere further down the video
chain.
Fixes: #7261
This code checked AVFrame.buf[0] instead of the decode return code to
see whether a frame was decoded. This is sort of suspicious; while I
think that the lavc API actually guarantees it, it's not intuitive
anyway. In addition, the code was unnecessarily roundabout.
Replace it with a proper error code check. Remove the other error return
(that was, or should have been, redundant before). The no-frame path is
now cleanly separated. Add an assert on the frame-returned path; if this
fails, lavc violated its own API.
This is preparation to get rid of the option-to-property bridge
(mp_on_set_option). This is a pretty insane thing that redirects
accesses to options to properties. It was needed in the ever ongoing
transition from something to... something else.
A good example for the need of this bridge is applying profiles at
runtime. This obviously goes through the config parser, but should also
make all changes effective, for which traditionally the property layer
is used.
There isn't much left that needs this bridge. This commit changes a
bunch of options (which also have a property implementation) to use
option change notifications instead. Many of the properties are still
left, but perform unrelated functions like OSD formatting.
This should be mostly compatible. There may be some subtle behavior
changes. For example, "hwdec" and "record-file" do not check for changes
anymore before applying them, so writing the current value to them
suddenly does something, while it was ignored before.
DVB changes untested, but should work.
The user can raise the number of tolerated hardware decoding errors. On
the other hand, we have a static limit on packets that are "saved" for
fallback handling (and that's a good idea to avoid unbounded memory
usage). In this case, it could happen that the start of a file was fine
after a fallback, but after that buffered amount of data, it would
suddenly skip.
It's more useful to skip buffering entirely if the number of tolerated
decoding errors exceeds the fixed buffer.
(And also, I'm sure nobody gives a shit about this feature.)
prepare_decoding() returned a bool that was supposed to tell whether
decoding could work, or if something was fucked. After recent changes to
the decoder loop, this did not work anymore, and caused an endless loop.
Redo it, so it makes more sense. avctx being NULL (software fallback
initialization failed) now signals EOF. hwdec_failed needs to be handled
on send_packet() only, where it probably never happens anyway.
(Who was the idiot who made libavcodec have two entrypoints for
decoding? Oh right, it was me. PEBKAC.)
Shovel the code around to make the data flow slightly simpler (?). At
least there's only one send_packet function now. The old code had the
problem that send_packet() could be called even if there were queued
packets; due to sending the queued packets in the receive_frame
function, this should not happen anymore (the code checking for this
case in send_packet should normally never be called).
Untested with actual full stream hw decoders (none available here); I
created a test case by making hwaccel decoding fail.
Forgotten in commit 5d5fdb7. This failed to return the error code
properly. In particular, if the decoder rejected the packet, this was
not properly detected. Normally, this mattered only in specific cases.
Fixes: #7115
Commit 5d5fdb77e9 changed details of the decoding control flow, and
called it a "high-risk" change. It turns out that this broke with with
hwdec copy mode, where there is some sort of delay queue (supposedly
increases efficiency, but more likely worthless cargo-cult).
It simply used the wrong (basically inverted) condition for the draining
case.
This was the only case that did not work properly. Other tests,
including video/audio decoding errors, software decoding fallbacks,
etc., seemed to work well. Might still not be exhaustive, as there are
so many corner cases.
Also change two error code returns. This don't/shouldn't really matter,
though the second error code led it to return both a frame and
AVERROR_EOF, which is unexpected, and makes lavc_process() leak a frame.
But also see next commit.
Fixes: 5d5fdb77e9
ad_lavc and vd_lavc use the lavc_process() helper to translate the
FFmpeg push/pull API to the internal filter API (which completely
mismatch, even though I'm responsible for both, just fucking kill me).
This interface was "slightly" too tight. It returned only a bool
indicating "progress", which was not enough to handle some cases (see
following commit).
While we're at it, move all state into a struct. This is only a single
bool, but we get the chance to add more if needed.
This fixes mpv falling asleep if decoding returns an error during
draining. If decoding fails when we already sent EOF, the state machine
stopped making progress. This left mpv just sitting around and doing
nothing.
A test case can be created with: echo $RANDOM >> image.png
This makes libavformat read a proper packet plus a packet of garbage.
libavcodec will decode a frame, and then return an error code. The
lavc_process() wrapper could not deal with this, because there was no
way to differentiate between "retry" and "send new packet". Normally, it
would send a new packet, so decoding would make progress anyway. If
there was "progress", we couldn't just retry, because it'd retry
forever.
This is made worse by the fact that it tries to decode at least two
frames before starting display, meaning it will "sit around and do
nothing" before the picture is displayed.
Change it so that on error return, "receiving" a frame is retried. This
will make it return the EOF, so everything works properly.
This is a high-risk change, because all these funny bullshit exceptions
for hardware decoding are in the way, and I didn't retest them. For
example, if hardware decoding is enabled, it keeps a list of packets,
that are fed into the decoder again if hardware decoding fails, and a
software fallback is performed. Another case of horrifying accidental
complexity.
Fixes: #6618
Generally, using x86 SIMD efficiently (or crash-free) requires aligning
all data on boundaries of 16, 32, or 64 (depending on instruction set
used). 64 bytes is needed or AVX-512, 32 for old AVX, 16 for SSE. Both
FFmpeg and zimg usually require aligned data for this reason.
FFmpeg is very unclear about alignment. Yes, it requires you to align
data pointers and strides. No, it doesn't tell you how much, except
sometimes (libavcodec has a legacy-looking avcodec_align_dimensions2()
API function, that requires a heavy-weight AVCodecContext as argument).
Sometimes, FFmpeg will take a shit on YOUR and ITS OWN alignment. For
example, vf_crop will randomly reduce alignment of data pointers,
depending on the crop parameters. On the other hand, some libavfilter
filters or libavcodec encoders may randomly crash if they get the wrong
alignment. I have no idea how this thing works at all.
FFmpeg usually doesn't seem to signal alignment internal anywhere, and
usually leaves it to av_malloc() etc. to allocate with proper alignment.
libavutil/mem.c currently has a ALIGN define, which is set to 64 if
FFmpeg is built with AVX-512 support, or as low as 16 if built without
any AVX support. The really funny thing is that a normal FFmpeg build
will e.g. align tiny string allocations to 64 bytes, even if the machine
does not support AVX at all.
For zimg use (in a later commit), we also want guaranteed alignment.
Modern x86 should actually not be much slower at unaligned accesses, but
that doesn't help. zimg's dumb intrinsic code apparently randomly
chooses between aligned or unaligned accesses (depending on compiler, I
guess), and on some CPUs these can even cause crashes. So just treat the
requirement to align as a fact of life.
All this means that we should probably make sure our own allocations are
64 bit aligned. This still doesn't guarantee alignment in all cases, but
it's slightly better than before.
This also makes me wonder whether we should always override libavcodec's
buffer pool, just so we have a guaranteed alignment. Currently, we only
do that if --vd-lavc-dr is used (and if that actually works). On the
other hand, it always uses DR on my machine, so who cares.
--hwdec=auto-copy was preferring vdpau over vaapi. In the HEVC 10 bit
case, this also led to hardware decoding not being enabled. (Probably
because the probing can't start over after enabling hw decoding fails at
runtime, or something like that.)
Possible that this subtly breaks on some setups. You can't always win.
Manual changes done:
* Merged the interface-changes under the already master'd changes.
* Moved the hwdec-related option changes to video/decode/vd_lavc.c.
this lead to an unexpected videotoolbox-copy hwdec name due to the last
two chars being cut off. since selection is also done by that name one
had to use "videotoolbox-co" to explicitly use the copy mode of
videotoolbox.
The default get_format does exactly do this, so we don't need to
duplicate it.
The only potential problem with this is that the logic doesn't entirely
prevent that the avcodec_default_get_format hw_device_ctx path is
triggered, which would probably work, but has unknown consequences and
interactions. But the way the logic currently works it can't happen,
provided the hwaccel metadata libavcodec provides is correct.
The --hwdec* options are a good fit for the vd_lavc local option
struct. This annoyingly requires manual prefixing of most of these
options with --vd-lavc (could be avoided by using more sub-struct
craziness, but let's not).
The default get_format does exactly do this, so we don't need to
duplicate it.
The only potential problem with this is that the logic doesn't entirely
prevent that the avcodec_default_get_format hw_device_ctx path is
triggered, which would probably work, but has unknown consequences and
interactions. But the way the logic currently works it can't happen,
provided the hwaccel metadata libavcodec provides is correct.
This includes codec/muxer/demuxer iteration (different iteration
function, registration functions deprecated), and the renaming of
AVFormatContext.filename to url (plus making it a malloced string).
Libav doesn't have the new API yet, so it will break. I hope they will
add the new APIs too.
Also a regression of the filter change. The new code is more picky about
EOF states, and it turns out the weird delay queue (used with some hwdec
copy back modes only) accidentally dropped an EOF event. It reset the
avctx before the delay queue was drained, which meant it never returned
the expected AVERROR_EOF status code.
Also don't signal EOF when copy back fails. It should just try to
continue until fallback is performed.
This is a dataflow issue caused by the filters change. When the fallback
happens, vd_lavc does not return a frame, but also does not accept a new
packet, which confuses lavc_process(). Fix this by immediately retrying
to feed the buffered packet and decode a frame on fallback.
Fixes#5489.
Move dec_video.c to filters/f_decoder_wrapper.c. It essentially becomes
a source filter. vd.h mostly disappears, because mp_filter takes care of
the dataflow, but its remains are in struct mp_decoder_fns.
One goal is to simplify dataflow by letting the filter framework handle
it (or more accurately, using its conventions). One result is that the
decode calls disappear from video.c, because we simply connect the
decoder wrapper and the filter chain with mp_pin_connect().
Another goal is to eventually remove the code duplication between the
audio and video paths for this. This commit prepares for this by trying
to make f_decoder_wrapper.c extensible, so it can be used for audio as
well later.
Decoder framedropping changes a bit. It doesn't seem to be worse than
before, and it's an obscure feature, so I'm content with its new state.
Some special code that was apparently meant to avoid dropping too many
frames in a row is removed, though.
I'm not sure how the source code tree should be organized. For one,
video/decode/vd_lavc.c is the only file in its directory, which is a bit
annoying.
I found that at least for mjpeg streams, FFmpeg will set packet pts/dts
anyway. The mjpeg raw video demuxer (along with some other raw formats)
has a "framerate" demuxer option which defaults to 25, so all mjpeg
streams will be played at 25 FPS by default.
mpv doesn't like this much. If AVFMT_NOTIMESTAMPS is set, it prints a
warning, that might print a bogus FPS value for the assumed framerate.
The code was originally written with the assumption that FFmpeg would
not set pts/dts for such formats, but since it does, the printed
estimated framerate will never be used. --fps will also not be used by
default in this situation.
To make this hopefully less confusing, explicitly state the situation
when the AVFMT_NOTIMESTAMPS flag is set, and give instructions how to
work it around.
Also, remove the warning in dec_video.c. We don't know what FPS it's
going to assume anyway. If there are really no timestamps in the stream,
it will trigger our normal missing pts workaround. Add the assumed FPS
there.
In theory, we could just clear packet timestamps if AVFMT_NOTIMESTAMPS
is set, and make up our own timestamps. That is non-trivial for advanced
video codecs like h264, so I'm not going there. For seeking and
buffering estimation the situation thus remains half-broken.
This is a mitigation for #5419.
Remove the max_count creation parameter, because it's pointless and
rarely ever did anything. Add a talloc parent parameter instead (which
is something completely different, but convenient, and all callers needs
to be changed anyway).
Instead of clearing the pool when the now removed maximum is reached,
clear it on image parameter changes instead.
If feed_packet() ended with DATA_WAIT, the player should have gone to
sleep, until the demuxer wakes it up again when there is new data. But
the call to read_frame() unconditionally overwrote this status code, so
it never waited. The consequence was that the core burned CPU by
effectively polling the demuxer status, which was noticeable especially
when seeking in network streams (since seeking is async, decoders will
start out with having to wait for network).
Regression since commit 33e5755c.
The old code tried to make sure at all times to try to read a new
packet. Only once that was read, it tried to retrieve new video or audio
frames the decoder might already have decoded.
Change this to strictly read frames from the decoder until it signals
that it wants a new packet, and only then read and feed a new packet.
This is in theory nicer, follows the libavcodec recommended data flow,
and and reduces the minimum latency by 1 frame.
This merely requires switching the order in which those calls are done.
Normally, the decoder will return only 1 frame until a new packet is
required. If we would just feed it 1 packet, return DATA_AGAIN, and wait
until the next frame is decoded, we would run the playloop 1 time too
often for no reason (which is fine but might have some overhead). To
avoid this, try to read a frame again after possibly feeding a packet.
For this reason, move the feed/read code to its own functions each,
instead of merely moving the code.
The audio and video code for this particular thing is basically
duplicated. The idea is to unify them one day, so make the change to
both. (Doing this for video is the real motivation for this change, see
below.)
The video code change is slightly more complicated, because we have to
care about the framedrop counting (which is just a heuristic, but for
now considered better than nothing, and possibly considered required to
warn the user of framedrops happening - maybe).
Apparently this change helps with stalling streams on Android with the
mediacodec wrapper and mpeg2 decoder implementations which deinterlace on
decoding (and return 2 frames per packet).
Based on an idea and observations by tmm1.
This fixes when resuming certain broken h264 files encoded by x264. See
FFmpeg commit 840b41b2a643fc8f0617c0370125a19c02c6b586 about the x264
bug itself.
Normally, the unregistered user data SEI (that contains the x264 version
string) is informational only. But libavcodec uses it to workaround a
x264 bug, which was recently fixed in both libavcodec and x264. The fact
that both encoder and decoder were buggy is the reason that it was not
found earlier, and there are apparently a lot of files around created by
the broken decoder. If libavcodec sees the SEI, this bug can be worked
around by using the old behavior.
If you resume a file with mpv (i.e. seeking when the file loads),
libavcodec never sees the first video packet. Consequently it has to
assume the file is not broken, and never applies the workaround,
resulting in garbage being played.
Fix this by always feeding the first video packet to the decoder on
init, and then flushing the codec (to avoid that an unwanted image is
output). Flushing the codec does not remove info such as the x264
version. We also abuse the fact that the first avcodec_send_packet()
always pushes the frame into the decoder (so we don't have to trigger
the decoder by requsting an output frame).
Technically, the user could just use --vd-lavc-o with the same result.
But I find it better to make this an explicit option, so we can document
the ups and downs, and also avoid setting it for non-h264.
A release has been made, so drop options deprecated for that release.
Also drop some options which have been deprecated a much longer time
before.
Also fix a typo in client-api-changes.rst.
Libav has been broken due to the hwdec changes. This was always a
temporary situation (depended on pending patches to be merged), although
it took a bit longer. This also restores the travis config.
One code change is needed in vd_lavc.c, because it checks the AV_PIX_FMT
for videotoolbox (as opposed to the mpv format identifier), which is not
available in Libav. Add an ifdef; the affected code is for a deprecated
option anyway.
I've decided that MP_TRACE means “noisy spam per frame”, whereas
MP_DBG just means “more verbose debugging messages than MSGL_V”.
Basically, MSGL_DBG shouldn't create spam per frame like it currently
does, and MSGL_V should make sense to the end-user and provide mostly
additional informational output.
MP_DBG is basically what I want to make the new default for --log-file,
so the cut-off point for MP_DBG is if we probably want to know if for
debugging purposes but the user most likely doesn't care about on the
terminal.
Also, the debug callbacks for libass and ffmpeg got bumped in their
verbosity levels slightly, because being external components they're a
bit less relevant to mpv debugging, and a bit too over-eager in what
they consider to be relevant information.
I exclusively used the "try it on my machine and remove messages from
MSGL_* until it does what I want it to" approach of refactoring, so
YMMV.
Annoying exception that makes no sense to keep. Normally, users or
client applications will either use --hwdec=auto, or not set the option
at all, which both leads to the expected result.
For METHOD_INTERNAL hwdecs (non-copy cases), make sure the VO interops
are always loaded, because those decoders will output hardware pixel
formats, which will need special support in vo_gpu. Otherwise,
initialization will fail, complaining that it can't convert the output
format to something the VO supports.
wm4
Jan Ekström
Akemi
Niklas Haas