If you set desired.samples to 0, SDL will return a default buffer size
on obtained.samples. This was broken, because ceil_power_of_two(0)
returns 1. Since 0 is usually not considered a power of two, this is
probably correct, but we still want to set desired.samples to 0 in this
case.
You can use --audio-buffer=0 to minimize the audio buffer size. But if
the AO reports no device buffer size (like e.g. ao_jack does), then the
buffer size is actually 0, and playback can never work properly.
Make it fallback to a size of 1, which is unlikely to work properly, but
you get what you asked for, instead of a freeze.
While the soft buffer size is already by default 200ms, it is not enough to guarantee dropout-free playback on Bluetooth audio. Bumping the device buffer size to the same value seems to suffice.
This helps the filter to adapt much faster to speed changes. Before this
commit, the filter just converted and output the full input frame, which
could cause problems with large input frames. This was made worse by
certain filters like dynaudnorm or loudnorm outputting pretty large
frames.
This commit changes the filter from trying to convert all input at once
to only outputting a single internally filtered frame. Internally, this
filter already output data in units of 60ms by default (controlled by
the "stride" sub-option), and concatenated as many output frames as
necessary to consume all input.
Behavior is still kind of bad when inserting the filter. This is because
the large frames can be buffered up after the insertion point, so the
speed change will be performed with a larger latency. The scaletempo
filter can't do anything against this, although it can be fixed by
inserting scaletempo as user filter as part of --af.
MPlayer used this to distinguish multiple decoder wrappers (such as
libavcodec vs. binary codec loader vs. builtin decoders). It lost
meaning in mpv as non-libavcodec things were dropped. Now it doesn't
serve any purpose anymore.
Parsing was removed quite a while ago, and the recent filter change
removed any use of the internal family field. Get rid of it.
Use the decoder wrapper that was introduced for video. This removes all
code duplication the old audio decoder wrapper had with the video code.
(The audio wrapper was copy pasted from the video one over a decade ago,
and has been kept in sync ever since by the power of copy&paste. Since
the original copy&paste was possibly done by someone who did not answer
to the LGPL relicensing, this should also remove all doubts about
whether any of this code is left, since we now completely remove any
code that could possibly have been based on it.)
There is some complication with spdif handling, and a minor behavior
change (it will restrict the list of codecs to spdif if spdif is to be
used), but there should not be any difference in practice.
Always make the hw params dump function use MSGL_DEBUG, and remove the
MSGL_V use. That means you need -v -v to see them. The detailed
information is usually not very interesting, so this reduces the log
noise.
The af_get_best_sample_formats() function had an argument of
int[AF_FORMAT_COUNT], which is slightly incorrect, because it's 0
terminated and should in theory have AF_FORMAT_COUNT+1 entries. It won't
actually write this many formats (since some formats are fundamentally
incompatible), but it still feels annoying and incorrect. So fix it, and
require that callers pass an AF_FORMAT_COUNT+1 array.
Note that the array size has no meaning in C function arguments (just
another issue with C static arrays being weird and stupid), so get rid
of it completely.
Not changing the af_lavcac3enc use, since that is rewritten in another
branch anyway.
This commit eliminates the following clang warning:
warning: macro expansion producing 'defined' has undefined behavior [-Wexpansion-to-defined]
Going by the clang commit message, this seems to be explicitly specified
as UB by the standard, and they added this warning because MSVC
apparently results in different behavior. Whatever, we can just avoid
the warning with some small changes.
This commit introduces the multiply-pitch af-command. Users may bind
keys to this command in order to incrementally adjust the pitch of a
track. This will probably mostly be useful for musicians trying to
transpose up and down by semi tones without having to calculate
the correct ratio beforehand.
As an example, here is an input.conf to test this feature:
{ af-command all multiply-pitch 0.9438743126816935
} af-command all multiply-pitch 1.059463094352953
The future direction might be not having such a user-visible filter at
all, similar to how vf_scale went away (or actually, redirects to
libavfilter's vf_scale).
This is part of trying to get rid of --af-defaults, and the af
resample filter.
It requires a complicated mechanism to set the defaults on the resample
filter for backwards compatibility.
If feed_packet() ended with DATA_WAIT, the player should have gone to
sleep, until the demuxer wakes it up again when there is new data. But
the call to read_frame() unconditionally overwrote this status code, so
it never waited. The consequence was that the core burned CPU by
effectively polling the demuxer status, which was noticeable especially
when seeking in network streams (since seeking is async, decoders will
start out with having to wait for network).
Regression since commit 33e5755c.
The old code tried to make sure at all times to try to read a new
packet. Only once that was read, it tried to retrieve new video or audio
frames the decoder might already have decoded.
Change this to strictly read frames from the decoder until it signals
that it wants a new packet, and only then read and feed a new packet.
This is in theory nicer, follows the libavcodec recommended data flow,
and and reduces the minimum latency by 1 frame.
This merely requires switching the order in which those calls are done.
Normally, the decoder will return only 1 frame until a new packet is
required. If we would just feed it 1 packet, return DATA_AGAIN, and wait
until the next frame is decoded, we would run the playloop 1 time too
often for no reason (which is fine but might have some overhead). To
avoid this, try to read a frame again after possibly feeding a packet.
For this reason, move the feed/read code to its own functions each,
instead of merely moving the code.
The audio and video code for this particular thing is basically
duplicated. The idea is to unify them one day, so make the change to
both. (Doing this for video is the real motivation for this change, see
below.)
The video code change is slightly more complicated, because we have to
care about the framedrop counting (which is just a heuristic, but for
now considered better than nothing, and possibly considered required to
warn the user of framedrops happening - maybe).
Apparently this change helps with stalling streams on Android with the
mediacodec wrapper and mpeg2 decoder implementations which deinterlace on
decoding (and return 2 frames per packet).
Based on an idea and observations by tmm1.
A release has been made, so drop options deprecated for that release.
Also drop some options which have been deprecated a much longer time
before.
Also fix a typo in client-api-changes.rst.
stdatomic.h defines no atomic_float typedef. We can't just use _Atomic
unconditionally, because we support compilers without C11 atomics. So
just create a custom atomic_float typedef in the wrapper, which uses
_Atomic in the C11 code path.
This does what af_volume used to do. Since we couldn't relicense it,
just rewrite it. Since we don't have a new filter mechanism yet, and the
libavfilter is too inconvenient, do applying the volume gain in ao.c
directly. This is done before handling the audio data to the driver.
Since push.c runs a separate thread, and pull.c is called asynchronously
from the audio driver's thread, the volume value needs to be
synchronized. There's no existing central mutex, so do some shit with
atomics. Since there's no atomic_float type predefined (which is at
least needed when using the legacy wrapper), do some nonsense about
reinterpret casting the float value to an int for the purpose of atomic
access. Not sure if using memcpy() is undefined behavior, but for now I
don't care.
The advantage of not using a filter is lower complexity (no filter auto
insertion), and lower latency (gain processing is done after our
internal audio buffer of at least 200ms).
Disavdantages include inability to use native volume control _before_
other filters with custom filter chains, and the need to add new
processing for each new sample type.
Since this doesn't reuse any of the old GPL code, nor does indirectly
rely on it, volume and replaygain handling now works in LGPL mode.
How to process the gain is inspired by libavfilter's af_volume (LGPL).
In particular, we use exactly the same rounding, and we quantize
processing for integer sample types by 256 steps. Some of libavfilter's
copyright may or may not apply, but I think not, and it's the same
license anyway.
These couldn't be relicensed, and won't survive the LGPL transition. The
other existing filters are mostly LGPL (except libaf glue code).
This remove the deprecated pan option. I guess it could be restored by
inserting a libavfilter filter (if there's one), but for now let it be
gone.
This temporarily breaks volume control (and things related to it, like
replaygain).
Looks like this is covered by LGPL relicensing agreements now.
Notes about contributors who could not be reached or who didn't agree:
Commit 7fccb6486e has tons of mp_msg changes look like they are not
copyrightable (even if they were, all mp_msg calls were rewritten in
mpv times again). The additional play() change looks suspicious, but
the function was rewritten several times anyway (first time after that
commit in 4f40ec312).
Commit 89ed1748ae was rewritten in commit 325311af3 and then again
several times after that. Basically all this code is unnecessary in
modern mpv and has been removed.
No code survived from the following commits: 4d31c3c53, 61ecf838f2,
d38968bd, 4deb67c3f. At least two cosmetic typo fixes are not
considered as well.
Commit 22bb046ad is reverted (this wasn't a valid warning anyway, just
a C++-ism icc applied to C). Using the constants is nicer, but at least
I don't have to decide whether that change was copyrightable.
Apparently some people want this. Actually making it compile is still
their problem, though, and I expect that build with FFmpeg upstream will
occasionally be broken (as it is right now). This is because mpv also
relies on API provided by Libav, and if FFmpeg hasn't merged that yet,
it's not our problem - we provide a version of FFmpeg upstream with
those changes merged, and it's called ffmpeg-mpv.
Also adjust the README which still talked about FFmpeg releases.
I _think_ this confuses Coverity and it thinks there is uninitialized
data to be read. Initialize the array to change/remove the warning, or
if there's a real problem, to make it easier to detect. (Basically apply
defensive coding.)
The new_segment field was used to track the decoder data flow handler of
timeline boundaries, which are used for ordered chapters etc. (anything
that sets demuxer_desc.load_timeline). This broke seeking with the
demuxer cache enabled. The demuxer is expected to set the new_segment
field after every seek or segment boundary switch, so the cached packets
basically contained incorrect values for this, and the decoders were not
initialized correctly.
Fix this by getting rid of the flag completely. Let the decoders instead
compare the segment information by content, which is hopefully enough.
(In theory, two segments with same information could perhaps appear in
broken-ish corner cases, or in an attempt to simulate looping, and such.
I preferred the simple solution over others, such as generating unique
and stable segment IDs.)
We still add a "segmented" field to make it explicit whether segments
are used, instead of doing something silly like testing arbitrary other
segment fields for validity.
Cached seeking with timeline stuff is still slightly broken even with
this commit: the seek logic is not aware of the overlap that segments
can have, and the timestamp clamping that needs to be performed in
theory to account for the fact that a packet might contain a frame that
is always clipped off by segment handling. This can be fixed later.
This should actually cover all of them, if you take into account that
some unchanged GPL source files include header files with such checks.
Also this was done already for the libaf derived code.
This is only for "safety" and to avoid misunderstandings.
The case at hand was 5.1 -> fl-fr-fc-lfe-na-na (apparently triggered by
ALSA). That means only the NA channels have to be cleared, but the
result was actually that fc and lfe were cleared. This is due to a
simple regression in the reorder code, which quite obviously got the
index of the first NA channel wrong.
Let's blame FFmpeg for just overwriting the samplerate in
av_frame_copy_props(). Can't fully hide my own brain damage though,
since mp_aframe_config_copy() expected that the rate is copied (that
function also copies format and channel layout).
See "Copyright" file for caveats.
This changes the remaining "almost LGPL" files to LGPL, because we think
that the conditions the author set for these was finally fulfilled.
This code could not be relicensed. The intention was to write new filter
code (which could handle both audio and video), but that's a bit of
work. Write some code that can do audio conversion (resampling,
downmixing, etc.) without the old audio filter chain code in order to
speed up the LGPL relicensing.
If you build with --disable-libaf, nothing in audio/filter/* is compiled
in. It breaks a few features, such as --volume, --af, pitch correction
on speed changes, replaygain.
Most likely this adds some bugs, even if --disable-libaf is not used.
(How the fuck does EOF notification work again anyway?)
Move it from af_lavrresample.c to a new aconverter.c file, which is
independent from the filter chain code. It also doesn't use mp_audio,
and thus has no GPL dependencies.
Preparation for later commits. Not particularly well tested, so have
fun.
Just reimplement it in some way, as mp_audio is GPL-only.
Actually I wanted to get rid of audio_buffer.c completely (and instead
have a list of mp_aframes), but to do so would require rewriting some
more player core audio code. So to get this LGPL relicensing over
quickly, just do some extra work.
Completely untested (rsound dev libs unavailable on my system). Trivial
enough that it's very likely that it'll just work. No port selection,
but could be added by parsing it as part of the device name.
Should fix#4714.
dst was not supposed to be initialized, the mp_audio_ setters (which
initialize dst's fields) assume it is -> shit happens. Regression from
recent changes. Was probably harmless.
Jan Ekström
Aman Gupta
wm4
tomty89
Vobe
Nicolas F