There is a very subtle race in vo that can manifest itself on pause
events. In the renderloop, render_frame, unsurprisingly, does the heavy
lifting of actually queuing up and flipping the frames. This is called
during normal playback. Sometimes various parts of the player can make a
redraw request which will latter trigger another render of the frame
later down in the loop (do_redraw). Because these requests can happen at
essentially anytime, sometimes the redraw request will happen *before*
do_redraw and it'll be caught in render_frame. When this happens,
the existing render_frame run works perfectly fine as a redraw so it
clears out the request which is sensible. Normally this is all locked of
course, but there's one catch. render_frame has to unlock itself when
propagating down into specific VOs/backends. That's what causes this
bug.
While render_frame is unlocked, other parts of the player can send
redraw requests which will cause in->request_redraw to become true. The
logic in the code always clears out this parameter after a successful
render, but this isn't correct. When in->request_become becomes true in
the middle of render_frame, there needs to be one more draw afterwards
to reflect whatever actually changed (usually the OSD). Instead, this
gets simply discarded. If you rapidly spam pause while rendering things
to the OSD at the same time, it's possible to for the last render to
be behind a frame and appear as if your osd event was ignored.
Once you realize what is happening, the fix is quite simple. Just store
the initial value of in->request_redraw before the unlock step. After we
do the render step and unlock again, only set in->request_redraw to
false if there was an initial redraw request. We just finished doing a
redraw, so it is safe to clear. Otherwise, leave in->request_redraw
alone. If it is initially false, then it will still be false and nothing
changes. However if it updated to true in the middle of the rendering,
this value is now preserved so we can go and call do_redraw later and
show what that last frame was meant to be when you pause. One
unfortunate thing about this design is that it is technically possible
for other internal things in vo to update during that unlocked period.
Hopefully, that doesn't actually happen and only redraw requests work
like this.
Fixes#8172 and #8350.
See https://sw.kovidgoyal.net/kitty/graphics-protocol/
This makes no attempt at querying terminal features or handling
terminal errors, as it would require mpv to pass the response codes
from the terminal to the vo instead of interpreting them as
keystrokes made by the user and acting very unpredictably.
Tested with kitty and konsole.
Fixes#9605
Wayland VO that can display images from either vaapi or drm hwdec
The PR adds the following changes:
1. a context_wldmabuf context with no gl dependencies
2. no-op ra_wldmabuf and dmabuf_interop_wldmabuf objects
no-op because there is no need to map/unmap the drmprime buffer,
and there is no need to manage any textures.
Tested on both x86_64 and rk3399 AArch64
This driver makes use of dmabuffer and viewporter interfaces
to enable efficient display of vaapi surfaces, avoiding
any unnecessary colour space conversion, and avoiding scaling
or colour conversion using GPU shader resources.
Render subs at the output resolution, rather than the video resolution.
Uses the new APIs found in libplacebo 197+, to allow controlling the OSD
resolution even for image-attached overlays.
Also fixes an issue where the overlay state did not get correctly
updated while paused. To avoid regenerating the OSD / flushing the cache
constantly, we keep track of OSD changes and only regenerate the OSD
when the OSD state is expected to change in some way (e.g. resolution
change). This requires introducing a new VOCTRL to inform the VO when
the UPDATE_OSD-tagged options have changed.
Fixes#9744, #9524, #9399 and #9398.
Ever instance of m_obj_list is a constant and for all of them, the field
is true. Just remove the field all together.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
As discussed in #8799, this will eventually replace vo_gpu. However, it
is not yet complete. Currently missing:
- OpenGL contexts
- hardware decoding
- blend-subtitles=video
- VOCTRL_SCREENSHOT
However, it's usable enough to cover most use cases, and as such is
enough to start getting in some crucial testing.
Based on the implementation of ffmpeg's sixel backend output written
by Hayaki Saito
https://github.com/saitoha/FFmpeg-SIXEL/blob/sixel/libavdevice/sixel.c
Sixel is a protocol to display graphics in a terminal. This commit
adds support to play videos on a sixel enabled terminal using libsixel.
With --vo=sixel, the output will be in sixel format.
The input frame will be scaled to the user specified resolution
(--vo-sixel-width and --vo-sixel-height) using swscaler and then
encoded using libsixel and output to the terminal. This method
requires high cpu and there are high frame drops for 720p and
higher resolution videos and might require using lesser colors and
have drop in quality. Docs have all the supported options listed
to fine tune the output quality.
TODO: A few parameters of libsixel such as the sixel_encode_policy
and the SIXEL_XTERM16 variables are hardcoded, might want to
expose them as command line options. Also the initialization
resolution is not automatic and if the user doesn't specify the
dimensions, it picks 320x240 as the default resolution which is not
optimal. So need to automatically pick the best fit resolution for
the current open terminal window size.
We've had some serious issues with GNOME in the past, but since then
their compositor has undergone some major internal improvements. The
most severe one [1], random vsync spikes and mistimed frames, can no
longer be reproduced by the original author of the issue. There are some
minor UI-related things (lack of window decorations for instance since
there is no xdg-decoration support), but users don't seem to complain
about that too much and they aren't revelant to playback.
3.38 isn't out quite yet, but that should also fix playback issues when
on a multimonitor setup (the fix is in the master branch at the moment).
In terms of playback, the only real concerning issue is the lack of idle
inhibit so a warning is still displayed. But GNOME has their own
workaround that users can use for that so if anyone happens to complain,
we can just point them to that.
[1] https://gitlab.gnome.org/GNOME/mutter/-/issues/957
Commit 6a13954d67 lowered the frequency of wakeups with this
condition. But it seems it sometimes the audio sync mode really should
get the wakeup before the frame is rendered. Normally, vo_thread is
supposed to perform this wakeup. Now the wakeup frequency is twice of
what should be needed - whatever, maybe it can be fixed properly once or
if timing is moved to the VO entirely in the future.
Fixes: #7777 (probably, untested)
This was not intended to be committed in 0e3f893606. It disables
the extra wakeup if working==true. I've convinced myself that the wakeup
was really needed at the time, so no idea how I didn't notice this until
someone pointed it out on the commit diff on github (lol).
The caller of render_frame() re-iterates without waiting if this
function returns true. That's normally meant for DS, where we draw
frames as fast as possible to let the driver perform waiting.
In display-sync mode, the core doesn't need to woken up every vsync, but
only every time a new actual video frame needs to be queued. So don't
wake up if there are still frames to repeat.
In audio-sync mode, the wakeup is simply redundant, since there's a
separate timer (in->wakeup_pts) to control when to queue a new frame. I
think.
This finally brings the required playloop iterations down to almost the
number of video frames. (As originally intended, really.)
Also a fairly risky change.
The wakeup at the end of VO frame rendering seems redundant, because
after rendering almost no state changes. The player core can queue a new
frame once frame rendering begins, and there's a separate wakeup for
this. The only thing that actually changes is in->rendering. The only
thing that seems to depend on it and can trigger a wakeup is the
vo_still_displaying() function. Change it so that it needs an explicit
call to a new API function, so we can avoid wakeups in the common case.
The vo_still_displaying() code is mostly just moved around due to
locking and for avoiding forward declarations.
Also a somewhat risky change (tasty new bugs).
Add an infrastructure for collecting performance-related data, use it in
some places. Add rendering of them to stats.lua.
There were two main goals: minimal impact on the normal code and normal
playback. So all these stats_* function calls either happen only during
initialization, or return immediately if no stats collection is going
on. That's why it does this lazily adding of stats entries etc. (a first
iteration made each stats entry an API thing, instead of just a single
stats_ctx, but I thought that was getting too intrusive in the "normal"
code, even if everything gets worse inside of stats.c).
You could get most of this information from various profilers (including
the extremely primitive --dump-stats thing in mpv), but this makes it
easier to see the most important information at once (at least in
theory), partially because we know best about the context of various
things.
Not very happy with this. It's all pretty primitive and dumb. At this
point I just wanted to get over with it, without necessarily having to
revisit it later, but with having my stupid statistics.
Somehow the code feels terrible. There are a lot of meh decisions in
there that could be better or worse (but mostly could be better), and it
just sucks but it's also trivial and uninteresting and does the job. I
guess I hate programming. It's so tedious and the result is always shit.
Anyway, enjoy.
When frame-stepping with display-sync mode enabled in high framerate
video, the frame was sometimes not redrawn correctly. Only the first OSD
interaction (or something similar) made it visible.
In this case, the core schedules many frames as dropped (because it's
ignorant of pausing/frame-stepping, as in theory the player is _not_
paused during frame-stepping, only at the end of it). There's a race
between the VO rendering the queued frame, and the core calling
vo_set_paused() after it has queued the frame. If the latter happens
first, the existing logic to redraw the previous dropped frame does
things correctly. If the former happens, the frame is not redrawn
automatically, but will be redrawn on the next user input (or if OSD is
enabled, and the pause state change updates it, which leads to an
immediate redraw).
Fix this by never actually dropping a frame in paused mode. The request
by the core to drop it is simply ignored.
Maybe this could be done slightly nicer by updating the pause state with
the VO atomically. Then we wouldn't have the frame drop counter going up
either (it's actually dropped, but then redrawn; but I doubt any user,
or me in a few weeks, would understand this). But I'm not really
interested in polishing this by increasing the complexity of the
frame-step code.
- remove VOCTRL_FULLSCREEN and VOCTRL_GET_FULLSCREEN
- have your own m_config_cache for the fullscreen option
(vo->opts_cache cannot be used because you lose per-option change
notifications, and it'd be a mess anyway)
- use VOCTRL_VO_OPTS_CHANGED to update it
(it's used for convenience)
- when updating it, check for the fullscreen option
(wasn't sure how to do it best; currently, it compares the raw
option pointers, but this could be changed)
- do not send VO_EVENT_FULLSCREEN_STATE on FS change
- instead write the option on FS change
(assign in opt. struct + m_config_cache_write_opt)
The code is very basic:
- only handles gamepads, could be extended for generic joysticks in the
future.
- only has button mappings for controllers natively supported by SDL2.
I heard more can be added through env vars, there's also ways to load
mappings from text files, but I'd rather not go there yet. Common ones
like Dualshock are supported natively.
- analog buttons (TRIGGER and AXIS) are mapped to discrete buttons using an
activation threshold.
- only supports one gamepad at a time. the feature is intented to use
gamepads as evolved remote controls, not play multiplayer games in mpv :)
This syscall avoids the need to guess an unused filename in /dev/shm and
allows seals to be placed on it. We immediately return if no fd got
returned, as there isn’t anything we can do otherwise.
Seals especially allow the compositor to drop the SIGBUS protections,
since the kernel promises the fd won’t ever shrink.
This removes support for any platform but Linux from this vo.
vo_wayland was removed during the wayland rewrite done in 0.28. However,
it is still useful for systems that do not have OpenGL.
The new wayland_common code makes vo_wayland much simpler, and
eliminates many of the issues the previous vo_wayland had.
The externally driven renderloop was originally added for the wayland
context (to make display sync somewhat work), but it has a lot of issues
with mpv's internal structure. A different approach should be used.
This reverts commit a743fef837.
The render API (vo_libmpv) had potential deadlock problems with
MPV_RENDER_PARAM_ADVANCED_CONTROL. This required vd-lavc-dr to be
enabled (the default). I never observed these deadlocks in the wild
(doesn't mean they didn't happen), although I could specifically provoke
them with some code changes.
The problem was mostly about DR (direct rendering, letting the video
decoder write to OpenGL buffer memory). Allocating/freeing a DR image
needs to be done on the OpenGL thread, even though _lots_ of threads are
involved with handling images. Freeing a DR image is a special case that
can happen any time. dr_helper.c does most of the evil magic of
achieving this. Unfortunately, there was a (sort of) circular lock
dependency: freeing an image while certain internal locks are held would
trigger the user's context update callback, which in turn would call
mpv_render_context_update(), which processed all pending free requests,
and then acquire an internal lock - which the caller might not release
until a further DR image could be freed.
"Solve" this by making freeing DR images asynchronous. This is slightly
risky, but actually not much. The DR images will be free'd eventually.
The biggest disadvantage is probably that debugging might get trickier.
Any solution to this problem will probably add images to free to some
sort of queue, and then process it later. I considered making this more
explicit (so there'd be a point where the caller forcibly waits for all
queued items to be free'd), but discarded these ideas as this probably
would only increase complexity.
Another consequence is that freeing DR images on the GL thread is not
synchronous anymore. Instead, it mpv_render_context_update() will do it
with a delay. This seems roundabout, but doesn't actually change
anything, and avoids additional code.
This also fixes that the render API required the render API user to
remain on the same thread, even though this wasn't documented. As such,
it was a bug. OpenGL essentially forces you to do all GL usage on a
single thread, but in theory the API user could for example move the GL
context to another thread.
The API bump is because I think you can't make enough noise about this.
Since we don't backport fixes to old versions, I'm specifically stating
that old versions are broken, and I'm supplying workarounds.
Internally, dr_helper_create() does not use pthread_self() anymore, thus
the vo.c change. I think it's better to make binding to the current
thread as explicit as possible.
Of course it's not sure that this fixes all deadlocks (probably not).
Dear diary,
today I fixed a shitty bug that was all my fault because I made a
horrible mess. (Except it was a horrible mess before I even touched
this shit, but let's not blame others.)
Sometimes, updates to VO option that control video sizing (like panscan)
didn't update the screen correctly. They were delayed until the next
option change or so.
It turns out that if the option update happens at the "same" time as a
VOCTRL, update_opts() doesn't actually notify the vo_driver of the
change. This in turn happened because run_control() called
m_config_cache_update(). The latter function returns true if the options
changed since the last call, and update_opts() also calls it (on the
same config cache) for the same purpose. The update_opts() call, which
is triggered by a third mechanism, comes later, but the cache update
call will return false (as it should). Basically, given the config API,
you can't act differently on multiple update calls and expect it to
work. The skipped handling in update_opts() meant that the notification
required to apply the changed option wasn't run.
Fix this by simply calling update_opts() directly instead. Now there's
only 1 m_config_cache_update() call on this specific instance. Fix the
call in run_reconfig() too, so the previous sentence isn't a lie (but it
probably doesn't make a difference in practice due to certain details).
I'm not sure how I even ran into this sort-of race condition. The VOCTRL
that messed up the option update was VOCTRL_UPDATE_PLAYBACK_STATE, which
happens semi-regularly.
Why this config cache shit and all the other shit? Rediscovering this
crap wasn't pleasant. It's a bunch of hacks that became necessary when
the ancient MPlayer architecture made it hard to move the VO to a
separate thread.
All the VO code typically accesses vo->opts (whose fields all used to be
global variables in MPlayer). The frontend changes these on user input.
Putting locking around all the options would be a nightmare, and keeping
a copy of the options in the thread was much simpler. You need a way to
propagate option changes, notify the thread, and update the local copy
too. And the result of these thoughts was the config cache mechanism.
In this specific case, the relevant cache update call in update_opts()
triggers a VOCTRL_SET_PANSCAN to the VO driver, which isn't related to
its former function anymore. Instead, it causes the VO driver to update
the video sizing/placing options, which the generic VO code can't do.
(Mostly because the VO driver includes the windowing stuff and is
responsible for resizing etc. itself.)
VOCTRLs sent by the frontend are even worse. MPlayer had no real runtime
option change mechanism. Some options were vaguely duplicated by
properties, so you could effectively change those options at runtime.
Each of these options had its own VOCTRL, which still exist today, e.g.
VOCTRL_FULLSCREEN, or VOCTRL_ONTOP. I tried to make all options runtime
changeable, and to unify properties with options. But I couldn't be
bothered with updating all VO drivers to listen to option changes
directly, because that would be pretty tedious. So the property code is
still all there and sends the old VOCTRLs. But of course you need to
sync up the options, which is why the run_control() code did that.
(Unrelated: VO_EVENT_FULLSCREEN_STATE is the worst shithack of them all.
Currently, only the frontend can actually write to options (for awful
reasons), so if the fullscreen state changes due to outside interaction,
the VO driver can't update the corresponding option fields. So the VO
notifies the frontend with said VO_EVENT_, and the frontend then sends
VOCTRL_GET_FULLSCREEN, and updates the global copy of the option with
the value returned by that. I still like to think the situation is not
that bad considering the monstrous effort of converting single-threaded
code that had hundreds of options in global variables to multi-threaded
code with no global variables at all.)
I misunderstood how this extension works. If I understand it correctly
now, it's worse than I thought. They key thing is that the (ust, msc,
sbc) tripple is not for a single swap event. Instead, (ust, msc) run
independently from sbc. Assuming a CFR display/compositor, this means
you can at best know the vsync phase and frequency, but not the exact
time a sbc changed value.
There is GLX_INTEL_swap_event, which might work as expected, but it has
no EGL equivalent (while GLX_OML_sync_control does, in theory).
Redo the context_glx sync code. Now it's either more correct or less
correct. I wanted to add proper skip detection (if a vsync gets skipped
due to rendering taking too long and other problems), but it turned out
to be too complex, so only some unused fields in vo.h are left of it.
The "generic" skip detection has to do.
The vsync_duration field is also unused by vo.c.
Actually this seems to be an improvement. In cases where the flip call
timing is off, but the real driver-level timing apparently still works,
this will not report vsync skips or higher vsync jitter anymore. I could
observe this with screenshots and fullscreen switching. On the other
hand, maybe it just introduces an A/V offset or so.
Why the fuck can't there be a proper API for retrieving these
statistics? I'm not even asking for much.
Use the extension to compute the (hopefully correct) video delay and
vsync phase.
This is very fuzzy, because the latency will suddenly be applied after
some frames have already been shown. This means there _will_ be "jumps"
in the time accounting, which can lead to strange effects at start of
playback (such as making initial "dropped" etc. frames worse). The only
reasonable way to fix this would be running a few dummy frame swaps at
start of playback until the latency is known. The same happens when
unpausing.
This only affects display-sync mode.
Correct function was not confirmed. It only "looks right". I don't have
the equipment to make scientifically correct measurements.
A potentially bad thing is that we trust the timestamps we're receiving.
Out of bounds timestamps could wreak havoc. On the other hand, this will
probably cause the higher level code to panic and just disable DS.
As a further caveat, this makes a bunch of assumptions about UST
timestamps. If there are delayed frames (i.e. we skipped one or more
vsyncs), the latency logic is mostly reset. There is no attempt to make
the vo.c skipped vsync logic to use this. Also, the latency computation
determines a vsync duration, and there's no effort to reconcile or share
the vo.c logic for determining vsync duration.
If anyone happened to build with GL disabled, this could lead to option
changes not always refreshing the screen. Since vo_gpu is always enabled
now (just not necessarily any backend for it), we can drop the #if
completely.
(The way this works is a bit idiotic - the option cache exists only to
grab the change notification, which will trigger a redraw and make
vo_gpu update its own second copy of them. But at least it avoids some
layering issues for now.)
This was always a legacy thing. Remove it by applying an orgy of
mp_get_config_group() calls, and sometimes m_config_cache_alloc() or
mp_read_option_raw().
win32 changes untested.
Until recently, ao_lavc and vo_lavc started encoding whenever the core
happened to send them data. Since audio and video are not initialized at
the same time, and the muxer was not necessarily opened when the first
encoder started to produce data, the resulting packets were put into a
queue. As soon as the muxer was opened, the queue was flushed.
Change this to make the core wait with sending data until all encoders
are initialized. This has the advantage that we don't need to queue up
the packets.
1. I want to get away from mp_image_params (maybe).
2. For encoding mode, it's convenient to get the nominal_fps, which is
a mp_image field, and not in mp_image_params.
There is some sort-of awkwardness here, because option access needs to
happen in a synchronized manner, and the framedrop flag is not in the VO
option struct. Remove the mp_read_option_raw() call and the awkward
change notification via VO_EVENT_WIN_STATE from command.c, and pass it
through as new vo_frame flag.
Removes the awkward notification through VO_EVENT_WIN_STATE.
Unfortunately, some awkwardness remains in mp_property_display_fps(),
because the property has conflicting semantics with the option.
The purpose of the new API is to make it useable with other APIs than
OpenGL, especially D3D11 and vulkan. In theory it's now possible to
support other vo_gpu backends, as well as backends that don't use the
vo_gpu code at all.
This also aims to get rid of the dumb mpv_get_sub_api() function. The
life cycle of the new mpv_render_context is a bit different from
mpv_opengl_cb_context, and you explicitly create/destroy the new
context, instead of calling init/uninit on an object returned by
mpv_get_sub_api().
In other to make the render API generic, it's annoyingly EGL style, and
requires you to pass in API-specific objects to generic functions. This
is to avoid explicit objects like the internal ra API has, because that
sounds more complicated and annoying for an API that's supposed to never
change.
The opengl_cb API will continue to exist for a bit longer, but
internally there are already a few tradeoffs, like reduced
thread-safety.
Mostly untested. Seems to work fine with mpc-qt.
This should be helpful for the new OSX Cocoa backend, which uses
opengl-cb internally. Since it comes with a behavior change that could
possibly interfere with libmpv/opengl_cb users, we mark it as explicit
API change.
Using the GL renderer for color conversion will make sure screenshots
will use the same conversion as normal video rendering. It can do this
for all types of screenshots.
The logic when to write 16 bit PNGs changes. To approximate the old
behavior, we decide by looking whether the source video format has more
than 8 bits per component. We apply this logic even for window
screenshots. Also, 16 bit PNGs now always include an unused alpha
channel. The reason is that FFmpeg has RGB48 and RGBA64 formats, but no
RGB064. RGB48 is 3 bytes and usually not supported by GPUs for
rendering, so we have to use RGBA64, which forces an alpha channel.
Will break for users who use --target-trc and similar options.
I considered creating a new gl_video context, but it could double GPU
memory use, so I didn't.
This uses FBOs instead of glGetTexImage(), because that increases the
chance it could work on GLES (e.g. ANGLE). Untested. No support for the
Vulkan and D3D11 backends yet.
Fixes#5498. Also fixes#5240, because the code for reading back is not
used with the new code path.
Dudemanguy
Niklas Haas
Thomas Weißschuh
sfan5
Mia Herkt
Aaron Boxer
Emil Velikov
Niklas Haas
Shreesh Adiga
wm4
Stefano Pigozzi
Emmanuel Gil Peyrot
Michael Forney
Cameron Cawley
Aman Gupta