This is commonly used to disable the screensaver with broken/non-
standard X screensavers. During pause, the screensaver should not be
disabled, so not calling this command while paused seems sensible.
See github issue #236.
The --deinterlace option does on playback start what the "deinterlace"
property normally does at runtime. You could do this before by using the
--vf option or by messing with the vo_vdpau default options, but this
new option is supposed to be a "foolproof" way.
The main motivation for adding this is so that the deinterlace property
can be restored when using the video resume functionality
(quit_watch_later command).
Implementation-wise, this is a bit messy. The video chain is rebuilt in
mpcodecs_reconfig_vo(), where we don't have access to MPContext, so the
usual mechanism for enabling deinterlacing can't be used. Further,
mpcodecs_reconfig_vo() is called by the video decoder, which doesn't
have access to MPContext either. Moving this call to mplayer.c isn't
currently possible either (see below). So we just do this before frames
are filtered, which potentially means setting the deinterlacing every
frame. Fortunately, setting deinterlacing is stable and idempotent, so
this is hopefully not a problem. We also add a counter that is
incremented on each reconfig to reduce the amount of additional work per
frame to nearly zero.
The reason we can't move mpcodecs_reconfig_vo() to mplayer.c is because
of hardware decoding: we need to check whether the video chain works
before we decide that we can use hardware decoding. Changing it so that
this can be decided in advance without building a filter chain sounds
like a good idea and should be done, but we aren't there yet.
Retrieve per-chapter metadata, but don't do much with it. We just make
the metadata of the _current_ chapter available as chapter-metadata
property. Returning the full chapter list with metadata would be no
problem, except that the property interface isn't really good with
structured data, so it's not available for now.
Not sure if it's worth it, but it was requested via github issue #201.
This option makes the cursor always visible in windowed mode.
Apparently, this is what (some?) Windows and OSX users expect. It's
disabled by default for now.
Restructure the cursor hide logic a bit for this purpose.
The --volume option accepted values up to 10000, but internally, the
value is always clipped to 0-100 range. What makes this even worse is
that --softvol-max suggests that it extends the range of --volume, which
is not the case. (And passing a volume larger than 100 to --volume
didn't even print a warning.)
When enabling --save-position-on-quit, playback position stored not only
on quit, but in any case playback of a file was stopped. This includes
going to the next file with playlist navigation commands.
After some discussion on IRC, it turned out that nobody thought this was
good behavior. Disable it, and really make it save only on quit.
Maybe the option is useless now, as the user could remap the CLOSE_WIN
key binding. On the other hand, CLOSE_WIN sounds and _is_ a bit obscure.
Modeled after the old playlist_parser.c, but actually new code, and it
works a bit differently.
Demuxers (and sometimes streams) are the component that should be used
to open files and to determine the file format. This was already done
for subtitles, but playlists still use a separate code path.
A wayland output based on shared memory. This video output is useful for x11
free systems, because the current libGL in mesa provides GLX symbols. It is also
useful for embedded systems where the wayland backend for EGL is not
implemented like the raspberry pi.
At the moment only rgb formats are supported, because there is still no
compositor which supports planar formats like yuv420p. The most used compositor
at the moment, weston, supports only BGR0, BGRA and BGR16 (565).
The BGR16 format is the fastest to convert and render without any noticeable
differences to the BGR32 formats. For this reason the current (very basic)
auto-detection code will prefer the BGR16 format. Also the weston source code
indicates that the preferred format is BGR16 (RGB565).
There are 2 options:
* default-format (yes|no) Which uses the BGR32 format
* alpha (yes|no) For outputting images and videos with transparencies
Decoding H264 using Video Decode Acceleration used the custom 'vda_h264_dec'
decoder in FFmpeg.
The Good: This new implementation has some advantages over the previous one:
- It works with Libav: vda_h264_dec never got into Libav since they prefer
client applications to use the hwaccel API.
- It is way more efficient: in my tests this implementation yields a
reduction of CPU usage of roughly ~50% compared to using `vda_h264_dec` and
~65-75% compared to h264 software decoding. This is mainly because
`vo_corevideo` was adapted to perform direct rendering of the
`CVPixelBufferRefs` created by the Video Decode Acceleration API Framework.
The Bad:
- `vo_corevideo` is required to use VDA decoding acceleration.
- only works with versions of ffmpeg/libav new enough (needs reference
refcounting). That is FFmpeg 2.0+ and Libav's git master currently.
The Ugly: VDA was hardcoded to use UYVY (2vuy) for the uploaded video texture.
One one end this makes the code simple since Apple's OpenGL implementation
actually supports this out of the box. It would be nice to support other
output image formats and choose the best format depending on the input, or at
least making it configurable. My tests indicate that CPU usage actually
increases with a 420p IMGFMT output which is not what I would have expected.
NOTE: There is a small memory leak with old versions of FFmpeg and with Libav
since the CVPixelBufferRef is not automatically released when the AVFrame is
deallocated. This can cause leaks inside libavcodec for decoded frames that
are discarded before mpv wraps them inside a refcounted mp_image (this only
happens on seeks).
For frames that enter mpv's refcounting facilities, this is not a problem
since we rewrap the CVPixelBufferRef in our mp_image that properly forwards
CVPixelBufferRetain/CvPixelBufferRelease calls to the underying
CVPixelBufferRef.
So, for FFmpeg use something more recent than `b3d63995` for Libav the patch
was posted to the dev ML in July and in review since, apparently, the proposed
fix is rather hacky.
Originally, the objective of this commit was changing --edition to be
1-based, but this was cancelled. I'm still leaving the change to
demux_mkv.c though, which is now only of cosmetic nature.
Add --video-align-x/y, --video-pan-x/y, --video-scale options and
properties. See the additions to the manpage for description and
semantics.
These transformations are intentionally done on top of panscan. Unlike
the (now removed) --panscanrange option, this doesn't affect the default
panscan behavior. (Although panscan itself becomes kind of useless if
the new options are used.)
This option allowed you to extend the range of the panscan controls, so
that you could essentially use it to scale the video. This will be
replaced by a separate option to set the zoom factor directly.
Apparently this was dropped some years ago, but judging from MPlayer's
handling of this, the original code wasn't so great anyway. The new
code handling clearing of panscan borders correctly, and integrates
better with the YUV path. (Although the VDPAU API sure makes this
annoying with its separate surface types for RGB.)
Note that we create 5 surfaces for some reason - I don't think this
makes too much sense (because we can't use the deinterlacer with RGB
surfaces), but at least it reduces the amount of differences with
the YUV code path.
Clearing the borders is done by drawing a single black pixel over the
window. This sounds pretty dumb, but it appears to work well, and
there is no other API for that. (One could try to use the video mixer
for this purpose, since it has all kinds of features, including
compositing multiple RGBA surfaces and clearing the window background.
But it would require an invisible dummy video surface to make the
video mixer happy, and that's getting too messy.)
If close to chapter start, skipping back goes to previous chapter (no change).
If more than <threshold> seconds in, skipping back will now go to the beginning
of the current chapter instead.
The threshold is set by the new option --chapter-seek-threshold and defaults to
5 seconds. A negative value disables the new functionality.
The VDPAU default colorkey, although it seems to be driver specific, is
usually green. This is a pretty annoying color, and you usually see it
briefly (as flashes) if the VDPAU window resizes.
Change it to some shade of black. The new default color is close to what
MPlayer picks as colorkey (and apparently it worked well for them):
VdpColor vdp_bg = {0.01, 0.02, 0.03, 0};
Since our OPT_COLOR can set 8 bit colors only, we use '#020507' instead,
which should be the same assuming 8 bit colors.
Obviously, you can't use black, because black is a way too common color,
and would make it too easy to observe the colorkey effect when e.g.
moving a terminal with black background over the video window.
Formally, this sets the "background color" of the presentation queue.
But in practice, this color is also used as colorkey.
This commit doesn't change the VDPAU default yet.
One example in ao.rst used the old syntax with mangled device names.
Fix it. Mention some shell related caveats. Explicitly mention the
change of device name syntax in changes.rst, because it seems to be
a common issue.
Normally, --subcp always forces conversion. This really always forces
conversion, even if the UTF-8 check on the input succeeds.
Extend the --subcp to allow codepages as fallback if UTF-8 doesn't
work. So, for example --subcp=utf8:cp1250 will use UTF-8 if the input
looks like UTF-8, and will fall back to use cp1250 if the UTF-8 check
fails.
I think this should actually be the default, but on the other hand,
this changes the semantics of the option, and a user would actually
expect --subcp to force conversion, rather than silently using UTF-8
if that happens to work.
This is based on the MPlayer VA API patches. To be exact it's based on
a very stripped down version of commit f1ad459a263f8537f6c from
git://gitorious.org/vaapi/mplayer.git.
This doesn't contain useless things like benchmarking hacks and the
demo code for GLX interop. Also, unlike in the original patch, decoding
and video output are split into separate source files (the separation
between decoding and display also makes pixel format hacks unnecessary).
On the other hand, some features not present in the original patch were
added, like screenshot support.
VA API is rather bad for actual video output. Dealing with older libva
versions or the completely broken vdpau backend doesn't help. OSD is
low quality and should be rather slow. In some cases, only either OSD
or subtitles can be shown at the same time (because OSD is drawn first,
OSD is prefered).
Also, libva can't decide whether it accepts straight or premultiplied
alpha for OSD sub-pictures: the vdpau backend seems to assume
premultiplied, while a native vaapi driver uses straight. So I picked
straight alpha. It doesn't matter much, because the blending code for
straight alpha I added to img_convert.c is probably buggy, and ASS
subtitles might be blended incorrectly.
Really good video output with VA API would probably use OpenGL and the
GL interop features, but at this point you might just use vo_opengl.
(Patches for making HW decoding with vo_opengl have a chance of being
accepted.)
Despite these issues, decoding seems to work ok. I still got tearing
on the Intel system I tested (Intel(R) Core(TM) i3-2350M). It was also
tested with the vdpau vaapi wrapper on a nvidia system; however this
was rather broken. (Fortunately, there is no reason to use mpv's VAAPI
support over native VDPAU.)
Perhaps not very useful, but reserved for situations when a user reports
awful latency and experimentation/debugging might be required to find
out why or to fix it (happens often).
On success, print the filter chain on the OSD. Otherwise, show an error
message on the OSD (just enough so that the user knows whether the
command worked).
Move the URL parsing code from m_option.c to stream.c, and simplify it
dramatically. This code originates from times when http code used this,
but now it's just relict from other stream implementations reusing this
code. Remove the unused bits and simplify the rest.
stream_vcd is insane, and the priv struct is different on every
platform, so drop the URL parsing. This means you can't specify a track
anymore, only the device. (Does anyone use stream_vcd? Not like this
couldn't be fixed, but it doesn't seem worth the effort, especially
because it'd require potentially touching platform specific code.)
Remove the (now unused) code for determining correct-pts mode based on
the demuxer in use. Change its description in the manpage to reflect
what this option does now.
The "options" pseudo-property allows reading global like this:
show_text ${options/name}
Where "name" maps to the option "--name". This allows retrieving option
values that are not properties. Write-access is not possible: this is
reserved for normal properties.
Note: it is possible that we'll change this again, and don't require the "options/" prefix to access options.
Make the VF/VO/AO option parser available to audio filters. No audio
filter uses this yet, but it's still a quite intrusive change.
In particular, the commands for manipulating filters at runtime
completely change. We delete the old code, and use the same
infrastructure as for video filters. (This forces complete
reinitialization of the filter chain, which hopefully isn't a problem
for any use cases. The old code forced reinitialization too, but it
could potentially allow a filter to cache things; e.g. consider loaded
ladspa plugins and such.)
Doing "mpv --vo=opengl:lscale=help" now lists possible scalers and
exits. The "backend" suboption behaves similar. Make the "stereo"
suboption a choice, instead of using magic integer values.
These two options were supported by ALSA and OSS only. Further, their
values were specific to the respective audio systems, so it doesn't make
sense to keep them as top-level options.
This changes how device names are handled. Before this commit, device
names were mangled in strange ways to avoid clashing with the option
parser syntax. "." was replaced with ",", and "=" with ":" (the user had
to do the inverse to get the correct device name).
The "new" option parser has multiple ways to escape option strings, so
we don't need this confusing hack anymore.
Add an explicit note to the manpage as well.
DVD playback had some trouble with PTS resets: libavformat's genpts
feature would try reading until EOF (worst case) to find a new usable
PTS in case a packet's PTS is not set correctly. Especially with slow
DVD access, this would make the player to appear frozen.
Reimplement it partially in demux_lavf.c, and use that code in the DVD
case. This is heavily "inspired" by the code in av_read_frame from
libavformat/utils.c. The difference is that we stop reading if no PTS
has been found after 50 packets (consider this a heuristic). Also, we
don't bother with the PTS wrapping and last-frame-before-EOF handling.
Even with normal PTS wraps, the player frontend will go to hell for the
duration of a frame anyway, and should recover quickly after that.
The terribleness of this commit is mostly that we duplicate libavformat
functionality, and that we suddenly need a packet queue.
Get rid of the strange and messy reliance on DEMUXER_TYPE_ constants.
Instead of having two open functions for the demuxer callbacks (which
somehow are both optional, but you can also decide to implement both...),
just have one function. This function takes a parameter that tells the
demuxer how strictly it should check for the file headers. This is a
nice simplification and allows more flexibility.
Remove the file extension code. This literally did nothing (anymore).
Change demux_lavf so that we check our other builtin demuxers first
before libavformat tries to guess by file extension.
Add this option, which lets users set the cache size without forcing it
even when playing from the local filesystem.
Also document the default value explicitly.
The Matroska linked segments case is slightly simplified: they can
never come from network (mostly because it'd be insane, and we can't
even list files from network sources), so the cache will never be
enabled automatically.
Delete demux_avi, demux_asf, demux_mpg, demux_ts. libavformat does
better than them (except in rare corner cases), and the demuxers have
a bad influence on the rest of the code. Often they don't output
proper packets, and require additional audio and video parsing. Most
work only in --no-correct-pts mode.
Remove them to facilitate further cleanups.
stream_vstream.c in particular was actually dependent on the network
code, and didn't compile anymore.
Cleanup the protocol list in mpv.rst, and add some missing ones
supported by libavformat to stream_lavf.c.
This commit removes the "old" networking code in favor of libavformat's
code.
The code was still used for mp_http, udp, ftp, cddb. http has been
mapped to libavformat's http support since approximately 6 months ago.
udp and ftp have support in ffmpeg (though ftp was added only last
month). cddb support is removed with this commit - it's probably not
important and rarely used if at all, so we don't care about it.
percent-pos was an integer (0-100). Sometimes higher precision is
wanted, but the property is this way because fractional parts would
look silly with normal OSD usage. As a compromise, make percent-pos
double (i.e. includes fractional parts), but print it as integer.
So ${percent-pos} is like an integer, but not ${=percent-pos}.
Use the video decoder chroma location flags and render chroma locations
other than centered. Until now, we've always used the intuitive and
obvious centered chroma location, but H.264 uses something else.
FFmpeg provides a small overview in libavcodec/avcodec.h:
-----------
/**
* X X 3 4 X X are luma samples,
* 1 2 1-6 are possible chroma positions
* X X 5 6 X 0 is undefined/unknown position
*/
enum AVChromaLocation{
AVCHROMA_LOC_UNSPECIFIED = 0,
AVCHROMA_LOC_LEFT = 1, ///< mpeg2/4, h264 default
AVCHROMA_LOC_CENTER = 2, ///< mpeg1, jpeg, h263
AVCHROMA_LOC_TOPLEFT = 3, ///< DV
AVCHROMA_LOC_TOP = 4,
AVCHROMA_LOC_BOTTOMLEFT = 5,
AVCHROMA_LOC_BOTTOM = 6,
AVCHROMA_LOC_NB , ///< Not part of ABI
};
-----------
The visual difference is literally minimal, but since videophiles
apparently consider this detail as quality mark of a video renderer,
support it anyway. We don't bother with chroma locations other than
centered and left, though.
Not sure about correctness, but it's probably ok.
This adds support for libquvi 0.9.x, and these features:
- start time (part of youtube URL)
- youtube subtitles
- alternative source switching ('l' and 'L' keys)
- youtube playlists
Note that libquvi 0.9 is still in development. Although this seems to
be API stable now, it looks like there will be a 1.0 release, which is
supposed to be the next stable release and the actual successor of
libquvi 0.4.x.
Should we actually get into trouble for unproper handling of
frame-based subtitle formats, this might be the simplest way to
work this around. Also is a bit more intuitive than -subfps, which
might use an unknown, misdetected, or non-sense video FPS.
Still pretty silly, though.
This code was once part of subreader.c, then traveled to libass, and now
made its way back to the fork of the fork of the original code, MPlayer.
It works pretty much the same as subreader.c, except that we have to
concatenate some packets to do auto-detection. This is rather annoying,
but for all we know the actual source file could be a binary format.
Unlike subreader.c, the iconv context is reopened on each packet. This
is simpler, and with respect to multibyte encodings, more robust.
Reopening is probably not a very fast, but I suspect subtitle charset
conversion is not an operation that happens often or has to be fast.
Also, this auto-detection is disabled for microdvd - this is the only
format we know that has binary data in its packets, but is actually
decoded to text. FFmpeg doesn't really allow us to solve this properly,
because a) the input packets can be binary, and b) the output will be
checked whether it's UTF-8, and if it's not, the output is thrown away
and an error message is printed. We could just recode the decoded
subtitles before sd_ass if it weren't for that.
demux_libass.c allows us to make subtitle format detection part of the
normal file loading process. libass has no probe function, but trying to
load the start of a file (the first 4 KB) is good enough. Hope that
libass can even handle random binary input gracefully without printing
stupid log messages, and that the libass parser doesn't accept too many
non-ASS files as input.
This doesn't handle the -subcp option correctly yet. This will be fixed
later.
This fixes the -subfps option (which unfortunately is still useful),
and fixes minor annoying timing errors (which unfortunately still
happen).
Note that none of these affect ASS or image subtitles. ASS is specially
handled: libass loads subtitles as ASS_Track. There are no actual
packets passed around, and sd_ass just uses the ASS_Track.
Disable the --sub-no-text-pp option. It's misleading now and always was
completely useless.
Basically rewrite all the code supporting the cache (i.e. anything other
than the ringbuffer logic). The underlying design is untouched.
Note that the old cache2.c (on which this code is based) already had a
threading implementation. This was mostly unused on Linux, and had some
problems, such as using shared volatile variables for communication and
uninterruptible timeouts, instead of using locks for synchronization.
This commit does use proper locking, while still retaining the way the
old cache worked. It's basically a big refactor.
Simplify the code too. Since we don't need to copy stream ctrl args
anymore (we're always guaranteed a shared address space now), lots of
annoying code just goes away. Likewise, we don't need to care about
sector sizes. The cache uses the high-level stream API to read from
other streams, and sector sizes are handled transparently.
The core didn't use these fields, and use of them was inconsistent
accross AOs. Some didn't use them at all. Some only set them; the values
were completely unused by the core. Some made full use of them.
Remove these fields. In places where they are still needed, make them
private AO state.
Remove the --abs option. It set the buffer size for ao_oss and ao_dsound
(being ignored by all other AOs), and was already marked as obsolete. If
it turns out that it's still needed for ao_oss or ao_dsound, their
default buffer sizes could be adjusted, and if even that doesn't help,
AO suboptions could be added in these cases.
This allows having properties like time-pos in the window title update
properly. There is a danger of this causing significant CPU usage,
depending on the properties used and the window manager.
The use of filters prior to PNG compression can greatly improve
compression ratio, with "mixed" (ImageMagick calls it "adaptive")
typically achieving the best results.
Use the recently introduced screensaver VOCTRLs to control the
screensaver in the X11 backend. This means the behavior when paused
changes: the old code always kept the screensaver disabled, but now the
screensaver is reenabled on pausing.
Rename the --stop-xscreensaver option to --stop-screensaver and make it
more generic. Now it affects all backends that respond to the
screensaver VOCTRLs.
Whatever this was supposed to be originally, it doesn't have much value
anymore. It just forced ad_mpg123 to upmix mono to stereo by default
(the audio chain can do that). As an option, it was mostly useless and
misleading, so get rid of it.
The additional flags are needed to get the muxer to write the source
video frame rate (instead of a fallback) for 100% equivalence to the
replaced MPlayer/mplayer2 y4m writer.
show_chapters, show_tracks, and show_playlist are killed and replaced
with the properties chapter-list, track-list, and playlist. The code
and the output of these stays the same, this is just moving a lot of
code around and reducing the number of properties.
The "old" commands will still be supported for a while (to avoid making
everyone angry), so handle them with the legacy layer. Add something to
suppress printing the legacy warnings for these commands.
