lavfi would segfault due to a NULL dereference if it was asked for its
metadata and none had been allocated (oops). This happens for libav
which has no concept of filter metadata.
And slightly adjust the semantics of MPV_EVENT_PAUSE/MPV_EVENT_UNPAUSE.
The real pause state can now be queried with the "core-idle" property,
the user pause state with the "pause" property, whether the player is
paused due to cache with "paused-for-cache", and the keep open event can
be guessed with the "eof-reached" property.
This property is set to "yes" if playback was paused due to --keep-open.
The change notification might not always be perfect; maybe that should
be improved.
Currently this is (probably) equivalent to "paused-for-cache", but the
latter is a bit special, while this new property is a bit more general.
One case where they might actually be different is dvdnav menus, but I
haven't checked.
Also add property change notifications for these two properties.
This is a read-only property that uses VFCTRL_GET_METADATA
to retrieve mp_tags metadata from a filter specified by label
Signed-off-by: wm4 <wm4@nowhere>
These playlist parsers are all what's left from the old mplayer playlist
parsing code. All of it is old code that does little error checking; the
type of C string parsing code that gives you nightmare.
Some playlist parsers have been rewritten and are located in
demux_playlist.c. The removed formats were not reimplemented. ASX and
SMIL use XML, and since we don't want to depend on a full blown XML
parser, this is not so easy. Possibly these formats could be supported
by writing a very primitive XML-like lexer, which would lead to success
with most real world files, but I haven't attempted that. As for NSC, I
couldn't find any URL that worked with MPlayer, and in general this
formats seems to be more than dead.
Move playlist_parse_file() to playlist.c. It's pretty small now, and
basically just opens a stream and a demuxer. No use keeping
playlist_parser.c just for this.
This is needed if you want to reimplement the status line in lua
I could only test drop-frame-count because I didn't find an easy way to
trigger paused-for-cache and total-avsync-change
Signed-off-by: wm4 <wm4@nowhere>
The only tricky part is keeping the cache contents, which is made simple
by allocating the new cache while still keeping the old cache around,
and then copying the old data.
To explain the "Don't use this when playing DVD or Bluray." comment: the
cache also associates timestamps to blocks of bytes, but throws away the
timestamps on seek. Thus you will experience strange behavior after
resizing the cache until the old cached region is exhausted.
Some of these property implementations already send notifications on
their own, but most don't. This takes care of them.
Of course this still doesn't handle all propertry changes - this is
impossible without special-casing each property that can change on its
own.
This turned out ridiculously complex. I think it will have to be
simplified some day. Main reason for the complexity are:
- filtering properties by forcing clients to observe individual
properties explicitly
(to avoid spamming clients with changes they don't want)
- optional retrieval of property value with the notification
(the basic idea was that this is more user friendly)
- allowing to the client to specify a format in which the value
should be retrieved
(because if a property changes its type, the client API couldn't
convert it properly, and compatibility would break)
I don't know yet which of these are important, and everything could
change. In particular, the interface and semantics should be adjusted
to reduce the implementation complexity.
While I consider the API complete, there could (and probably will) be
bugs left. Also while the implementation is complete, it's inefficient.
The complexity of the property matching is O(a*b*c) with a clients,
b observed properties, and c properties changing at once. I threw away
an earlier implementation using bitmasks, because it was too unwieldy.
Change the type of the property from a string list (alternating
key/value entries) to a map. Using the client API, this will return
MPV_FORMAT_NODE_MAP, while Lua mp.get_property_native returns a
dictionary-like table.
We've just checked whether a sub-path started with "name/", but that
changes behavior whether the property name has a trailing '/' or not.
Using a helper function to split of path components avoids this problem.
Reduce most dependencies on struct mp_csp_details, which was a bad first
attempt at dealing with colorspace stuff. Instead, consistently use
mp_image_params.
Code which retrieves colorspace matrices from csputils.c still uses this
type, though.
It's possible that MPContext has a chapter list, but the demuxer
doesn't. In this case, accesing the chapter-metadata property would
lead to invalid accesses.
(This fixes the out of bound access, but in theory, the returned data
can still be incorrect, since MPContext chapters don't need to map
directly to demuxer chapters.)
This commit makes 'disc-title' property writable using
STREAM_CTRL_SET_CURRENT_TITLE. This commit also contains
implementation of STREAM_CTRL_SET_CURRENT_TITLE for stream_bluray.
Currently, 'disc-title' is writable only for stream_dvdnav and
stream_bluray and stream_dvd is not supported.
Change script_message to broadcast the message to all clients. Add a new
script_message_to command, which does what the old script_message
command did.
This is intended as simplification, although it might lead to chaos too.
They're strictly DVD-only, so it's better to mark them as such. This
also documentes the "title" (now renamed to "dvd-title") property.
This also avoids collision with the --title option. (Technically, there
was no problem. But it might be confusing for users, since we have a
policy of naming properties and options the same if they refer to the
same underlying functionality.)
This commit adds new property 'title' which indicates current
playing title of disc. This property is useful when using a stream
whose title can be changed during playback, e.g., dvdnav.
For example, consider the case when audio initialization fails. Then the
audio track is deselected. Before this commit, this would have been
equivalent to the user disabling audio. This is bad when multiple files
are played at once (the next file would have audio disabled, even if it
works), or if playback resume is used (if e.g. audio output failed to
initialize, then audio would be disabled when resuming, even if the
system's audio driver was fixed).
The step argument for "add volume <step>" was ignored until now. Fix it.
There is one problem: by defualt, "add volume" should use the value set
with --volstep. This value is 3 by default. Since the default volue for
the step argument is always 1 (and we don't really want to make the
generic code more complicated by introducing custom step sizes), we
simply multiply the step argument with --volstep to keep it compatible.
The --volstep option should probably be just removed in the future.
The value range is 0-100, so fractional values don't make much sense.
But the underlying data type is probably float to avoid getting "stuck"
when doing small volume increments. So step this around and pretend it's
an integer just on display.
Not sure about this... might redo.
At least this provides a case of a broadcasted event, which requires
per-event data allocation.
See github issue #576.
Until now, strings were the only allowed dynamically allocated argument
type in input commands. Extend it so that it works for any type. (The
string expansion in command.c is of course still string specific.)
Some code accessed m_option.name to get the property name. (Maybe only
show_property_osd() had a significant use of it.) Remove that, and
remove setting names and dummy names as well.
The old code usually assumed that the name was set, and
show_property_osd() used it to get the proper name of deprecated
aliases.
The "vf" property was listed as "vf*". Not sure why that was done, but
it works without anyway.
M_OPT_PARSE_ESCAPES was pretty stupid, and broke the (useful) assumption
that string variables contain exactly the same value as set by the
option. Simplify it, and move escape handling to the place where it's
used.
Escape handling itself is not terribly useful, but still allows useful
things like multiline custom OSD with "\n".
The old way still works, and is fine to use. Still discourage it,
because it might conflict with other ways to access this property, such
as the one added in the next commit.
In particular, this affects drag & drop of subtitles, which uses sub_add
internally. This will make the subtitles show up immediately, instead of
requiring manual selection of the added subtitle.
Might be not so ideal when adding multiple subtitles at once, because
that leads to multiple sub_add commands, and will end up with the last
subtitle instead of the first selected. But this is a minor detail.
This is partial only, and it still accesses some MPContext internals.
Specifically, chapter and track lists are still read directly, and OSD
access is special-cased too.
The OSC seems to work fine, except using the fast-forward/backward
buttons. These buttons behave differently, because the OSC code had
certain assumptions how often its update code is called.
The Lua interface changes slightly.
Note that this has the odd property that Lua script and video start
at the same time, asynchronously. If this becomes an issue, explicit
synchronization could be added.
Add a client API, which is intended to be a stable API to get some rough
control over the player. Basically, it reflects what can be done with
input.conf commands or the old slavemode. It will replace the old
slavemode (and enable the implementation of a new slave protocol).
The code removed from handle_input_and_seek_coalesce() did two things:
1. If there's a queued seek, stop accepting non-seek commands, and delay
them to the next playloop iteration.
2. If a seek is executing (i.e. the seek was unqueued, and now it's
trying to decode and display the first video frame), stop accepting
seek commands (and in fact all commands that were queued after the
first seek command). This logic is disabled if seeking started longer
than 300ms ago. (To avoid starvation.)
I'm not sure why 1. would be needed. It's still possible that a command
immediately executed after a seek command sees a "seeking in progress"
state, because it affects queued seeks only, and not seeks in progress.
Drop this code, since it can easily lead to input starvation, and I'm
not aware of any disadvantages.
The logic in 2. is good to make seeking behave much better, as it
guarantees that the video display is updated frequently. Keep the core
idea, but implement it differently. Now this logic is applied to seeks
only. Commands after the seek can execute freely, and like with 1., I
don't see a reason why they couldn't. However, in some cases, seeks are
supposed to be executed instantly, so queue_seek() needs an additional
parameter to signal the need for immediate update.
One nice thing is that commands like sub_seek automatically profit from
the seek delay logic. On the other hand, hitting chapter seek multiple
times still does not update the video on chapter boundaries (as it
should be).
Note that the main goal of this commit is actually simplification of the
input processing logic and to allow all commands to be executed
immediately.
Do two things:
1. add locking to struct osd_state
2. make struct osd_state opaque
While 1. is somewhat simple, 2. is quite horrible. Lots of code accesses
lots of osd_state (and osd_object) members. To make sure everything is
accessed synchronously, I prefer making osd_state opaque, even if it
means adding pretty dumb accessors.
All of this is meant to allow running VO in their own threads.
Eventually, VOs will request OSD on their own, which means osd_state
will be accessed from foreign threads.
These were needed before the last commit, but now they don't do anything
anymore. (They were used to decide whether to replace or stack the
previous OSD message when a new one was displayed.)
If certain OSD messages were displayed at the same time, the hidden
messages were put on the stack, and displayed again once the higher
priority messages disappeared. The idea was probably that lower priority
messages could not hide higher priority ones, and also that the lower
messages did not get lost.
But in practice, this gives confusing results with OSD messages randomly
reappearing for a brief time. Remove it.
Before that, it just returned -1.
The print case is inconsistent with that, but I'll leave it for now,
because it's consistent with status line / show_progress behavior.
The terminal OSD code includes the handling of the terminal status line,
showing player OSD messages on the terminal, and showing subtitles on
terminal (the latter two only if there is no video window, or if
terminal OSD is forced).
This didn't handle some corner cases correctly. For example, showing an
OSD message on the terminal always cleared the previous line, even if
the line was an important message (or even just the command prompt, if
most other messages were silenced).
Attempt to handle this correctly by keeping track of how many lines the
terminal OSD currently consists of. Since there could be race conditions
with other messages being printed, implement this in msg.c. Now msg.c
expects that MSGL_STATUS messages rewrite the status line, so the caller
is forced to use a single mp_msg() call to set the status line.
Instead of littering print_status() all over the place, update the
status only once per playloop iteration in update_osd_msg(). In audio-
only mode, the status line might now be a little bit off, but it's
perhaps ok.
Print the status line only if it has changed, or if another message was
printed. This might help with extremely slow terminals, although in
audio+video mode, it'll still be updated very often (A-V sync display
changes on every frame).
Instead of hardcoding the terminal sequences, use
terminfo/termcap to get the sequences. Remove the --term-osd-esc option,
which allowed to override the hardcoded escapes - it's useless now.
The fallback for terminals with no escape sequences for moving the
cursor and clearing a line is removed. This somewhat breaks status line
display on these terminals, including the MS Windows console: instead of
querying the terminal size and clearing the line manually by padding the
output with spaces, the line is simply not cleared. I don't expect this
to be a problem on UNIX, and on MS Windows we could emulate escape
sequences. Note that terminal OSD (other than the status line) was
broken anyway on these terminals.
In osd.c, the function get_term_width() is not used anymore, so remove
it. To remind us that the MS Windows console apparently adds a line
break when writint the last column, adjust screen_width in terminal-
win.c accordingly.
Use the video chain for this instead. This is for facilitating coming
changes, which will clean up the vo->aspdat stuff, and this code would
be in the way.
Note that we can't use mp_msg, because it's not async-signal safe (we
might be running other threads while forking, so only functions
specified to be async-signal safe can be called, and this doesn't
include stdio; mp_msg acquires a mutex too).
Also, always print a \n before running the program to flush the status
line. The effect is that a program running successfully as well as the
error message will effectively start on a new line.
This is relatively hacky, but it's Christmas, so it's ok. This does two
things: 1. allow selecting two subtitle tracks, and 2. include a hack
that renders the second subtitle always as toptitle. See manpage
additions how to use this.
There's a single mp_msg() in path.c, but all path lookup functions seem
to depend on it, so we get a rat-tail of stuff we have to change. This
is probably a good thing though, because we can have the path lookup
functions also access options, so we could allow overriding the default
config path, or ignore the MPV_HOME environment variable, and such
things.
Also take the chance to consistently add talloc_ctx parameters to the
path lookup functions.
Also, this change causes a big mess on configfiles.c. It's the same
issue: everything suddenly needs a (different) context argument. Make it
less wild by providing a mp_load_auto_profiles() function, which
isolates most of it to configfiles.c.
Always pass around mp_log contexts in the option parser code. This of
course affects all users of this API as well.
In stream.c, pass a mp_null_log, because we can't do it properly yet.
This will be fixed later.
Remove these because I'm too lazy to convert them to proper
STREAM_CTRLs. Considering that probably nobody uses radio://, caring
about this is a complete waste of time. I will add these commands back
if someone asks for them, but I don't expect this to happen.
Since m_option.h and options.h are extremely often included, a lot of
files have to be changed.
Moving path.c/h to options/ is a bit questionable, but since this is
mainly about access to config files (which are also handled in
options/), it's probably ok.
Kevin Mitchell
wm4
David Weber
xylosper