Internal subtitles were not shown when switching between tracks while
mpv was paused. The reason for this is simply because the demuxer data
isn't available yet when the track switch happens. Fixing it is
basically just retrying until the packet is actually available when the
player is paused. Fixes#8311.
1df0a42a8c changed aspect-ratio from
floats to doubles, but forgot to change this function for
pretty-printing them as fractions for the video-aspect-override property
This only existed as essentially a workaround for meson's behavior and
to maintain compatibility with the waf build. Since waf put everything
in a generated subdirectory, we had to put make a subdirectory called
"generated" in the source for meson so stuff could go to the right
place. Well now we don't need to do that anymore. Move the meson.build
files around so they go in the appropriate place in the subdirectory of
the source tree and change the paths of the headers accordingly. A
couple of important things to note.
1. mpv.com now gets made in build/player/mpv.com (necessary because of
a meson limitation)
2. The macos icon generation path is shortened to
TOOLS/osxbundle/icon.icns.inc.
The track during lavfi-complex can actually be NULL which meant that
ca4192e2df regressed lavfi-complex by
causing mpv to crash during runtime changes of the filter. Additionally,
it's possible for the decoder wrapper to also be NULL. check_framedrop
within write_video checks this, but check_for_hwdec_fallback does not.
Perhaps, it's impossible for this to happen, but we might as well add
the check here to be on the safe side since mp_decoder_wrapper_control
is not designed to handle a NULL.
It's a bit of an edge case, but since we now allow the disabling of the
software fallback it's possible to have a situation where hwdec
completely fails and the mpv window is still lingering from the previous
item in the playlist. What needs to happen is simply that the vo_chain
should uninit itself and handle force_window if needed. In order to do
that, a new VDCTRL is added that checks vd_lavc if force_eof was set.
player/video will then start the uninit process if needed after getting
this.
Currently, the osc will add a margin of (osc_height / 2) to the
deadzonesize for the window controls, the topbar and the bottombar,
i.e. when osc-deadzonesize=1, the osc will show up even if the cursor
is only hovering (osc_height / 2) pixels above or below it. This is not
what this option is supposed to do according to the manual, instead
osc-deadzonesize=1 should result in the osc only appearing when it is
directly hovered. The user can simply set osc-deadzonesize=0.9 or so if
such a margin is desired, instead make the option work as advertised by
removing this margin.
It should be noted that osc-layout=box does not share this behavior,
and it already works as advertised in the manual.
mpv already has a bunch of software scaling utils. Instead of forcing
every VO to implement this, we can just grab the frame and scale it in
software in one central place. Fixes#11968.
We should always be trying hardware screenshots (VOCTRL_SCREENSHOT and
VOCTRL_SCREENSHOT_WIN) before software ones. Rearrange all the logic
here to hopefully make this clearer. The mode is passed to add_osd
(renamed since it will also be used to add the osd) which will be used
more in the next commit.
When using lavfi-complex, no single track populates current_track for audio.
We work around this by iterating over the list of tracks and using the first
non-null language from a selected track. If multiple tracks are selected
(i.e. used by the filter) and have conflicting language tags, we'll ignore
them all and maintain the previous behavior (null).
6a365b258a broke deleting redirect entries for resuming playback. If you
do mpv dir1 dir2, quit-watch-later on a file in dir1, then later
quit-watch-later on a file in dir2, mpv dir1 dir2 would not resume from
dir2 because the redirect entry for dir1 is never deleted.
Fix this by deleting watch later config files for directory/playlist
entries.
Currently, mpv immediately deletes the watch_later file after an attempt
at playing the file is made. This is not really ideal because the file
may fail to load for a variety of reasons (including not even existing),
but the state is cleared anyway unconditionally. Instead, just wait
until after playback is successfully initialized before deleting it.
This way silly mistakes like forgetting to mount the drive doesn't
result in deleting your watch_later data. Fixes#3427.
in the first iteration, *out will be null and thus the steal and the
strdup both sets the parent to NULL - leaking the allocation later on
(caught via LeakSanitizer).
let append_lang() take care of setting the parent instead.
519e56f caused an attempt to get the language even if the file name
didn't start with the movie title. However, detecting a language when
fuzz >= 1 or the language is known, caused prio to be non-zero which
caused the file to be included regardless of its name. This shouldn't be
the behavior when sub-auto != all.
Now all the prio updates that depend on lang will only happen if the
file in question starts with the movie name. Since language was never
detected before if this wasn't true, the behavior should be the same as
before 519e56f when sub-auto != all.
Closes: #11749
Finding the prefix in the key is not enough, the key has to actually
start with the prefix. Otherwise a key like `uosc-font_scale` will not
only match the `uosc-` prefix, but also the `osc-` prefix, resulting
in a logged warning about `-font_scale` being an unknown key.
Previously, we'd only attempt to call guess_lang_from_filename if the
external file name matched the video name ignoring the extensions. So if
they didn't match, we'd just report the language as "unknown". And since
the name will never match for urls, the language would always be treated
as unknown.
Now we'll always try to guess the language from the filename regardless
of its similarity to the video file name.
Closes#10348
A pain point for some users is the fact that watch_later is stored in
the ~/.config directory when it's really not configuration data. Roughly
2 years ago, XDG_STATE_DIR was added to the XDG Base Directory
Specification[0] and its description, user-specific state data, actually
perfectly matches what watch_later data is for. Let's go ahead and use
this directory as the default for watch_later. This change only affects
non-darwin unix-like systems (i.e. Linux, BSDs, etc.). The directory
doesn't move for anyone else.
Internally, quite a few things change with regards to the path
selection. If the platform in question does not have a statedir concept,
then the path selection will simply return "home" instead (old
behavior). Fixes#9147.
[0]: 4f2884e16d
Currently, nothing new is actually implemented but the idea is simply to
just pass a type string all the way up from mp_find_user_file down to
actually getting the platform path. This allows for selecting different
directories besides the user's native config directory. See the next
commit for an implementation.
If --screenshot-tag-csp=no, then there won't be any color tags in the
output space, so PNG and JXL screenshots should be written as sRGB
rather than the native space of the input video.
6e4a76db08 attemped to reject invalid
properties and print an error for users so they actually know that
something is going wrong. This worked by simply checking if the property
not found error is returned, but it is actually perfectly possible for a
property to not be found (different than being unavailable just to be
clear here) at first and then show up later. An example would be
user-data which can be created at any time. It's also possible with
subproperties of things like track-list where a new track could be added
later.
In light of this, let's soften the error checking logic here with a
simple trick. mpv already keeps track of all toplevel properties and it
can be easily retrieved with the "property-list" property, so just cache
that. When we get a property not found error, instead of rejecting it,
try to match it something in the property-list first. If we have a
match, then consider the property valid and allow the script to behavior
normally. If not, we reject it. This approach means property names that
are obviously wrong like "fake-property-here" will reliably get rejected
and something like "user-data/test" works as usual. The downside is that
errors in the subproperty level are not caught, so something like
"track-list/0/fake-property" would still be considered valid and the
user gets no warning that this won't work. We'll just accept the
compromise and hope this isn't too common.
Fixes#11550.
Instead of erroring when values returned by profile-cond expressions
aren't booleans, apply the relative profiles as long as the return
values are truthy. This allows shortening conditions like
profile-cond=path:match('foo') ~= nil
to
profile-cond=path:match('foo')
The idle logo could appear on the left side of the window for a split
second after starting.
That is because when osd dimensions can be reported as 0 at the very beginning.
Since the width gets calculated based on a fixed height and the aspect ratio,
which is 0, that results in a width of 0 until the next update.
Previously, it just silently didn't do anything which is not very
intuitive. Since the lua api returns an error string, check to see if
it matches the "property not found" case and print an error message.
Additionally, don't add the fake property to the internal
cached_properties list or try to observe it. This avoids redundant
evaluate calls which will never actually succeed. We do still mark it
under watched_properties however. This avoids having to call
mp.get_property_native multiple times.
