Should give a good deal more explicit control and insight over the
player state.
Some feel a bit pointless, and/or expose internal weirdness. However,
it's not like the existing weirdness didn't exist before, or can be made
go away. (In part, the weirdness is because certain in-between states
are visible. Hiding them would make things simpler, but less flexible.)
Maybe this actually gives users a better idea how the API _should_ look
like, too.
On a side note, this tries to really guarantee that mpctx->playing is
set between playback start/end. For that, the loadfile.c changes assume
that mpctx->playing is set (guaranteed by code above the change), and
that playing->filename is set (probably could never be false; was broken
before and actually would have crashed if that could ever happen; in any
case, also add an assert to playlist.c for this).
playlist_entry_to_index() now tolerates playlist_entrys that are not
part of the playlist. This is also needed for mpctx->playing.
It's odd that this state is observable, but is made implicit by making
the property unavailable. It's also odd that an API user cannot directly
put the player into such a state.
Just allow reading/writing -1 (or in fact, any out of bounds index) for
this case.
I'm also refraining from using OPT_CHOICE for the "no selection" case,
because although that would be cleaner in theory, it would cause only
problems to API users due to the more complex property type (worse is
better).
One reason for not restricting the integer range on the input property
anymore is that if there are no playlist elements, the range would
contain only 1 integer, which cannot be represented anymore since the
recent m_option change. This was actually broken with 1 element
playlists before (and still is, with the constricted type for OSD and
the add/cycle commands). Doesn't matter too much.
When the current file changes (or rather, when starting/finishing
playback of a playlist entry), clients tend to have the problem that
it's hard to tell whether a property change notification (via
mpv_observe_property() and mechanisms layered on top of it) is from the
previous or new playlist entry. The previous commit probably helps, but
all the asynchronity is still a bit unhelpful.
Try to make this better by adding new hooks, that are run before/after
playback init/deinit. This is similar to the existing hooks, except
they're outside of "initialized" playback, which excludes that you might
accidentally get an overlap between the current and the previous/next
playlist entry.
That still doesn't seem quite enough, since normally, property change
notifications come after the hook event. So basically a client would
have to explicitly "drain" the event queue within the hook, and make the
hook continue only after that is done. Knowing when property
notifications are done is another asynchronous nightmare (how exactly it
works keeps changing within client.c, and an API user probably can't
tell anymore when all pending properties are truly done). So introduce
another guarantee: properties that were changed before the hook happens
will be returned before the hook event is returned. That means the
client will have received all pending property notifications from the
previous playlist entry (or whatever) before the hook is entered.
As another minor complication, we shouldn't just keep the hook pending
until _all_ property notifications are done, since the client's hook
could produce new ones. (Or just consider things like the demuxer thread
hammering the client with cache update events, while the "on_preloaded"
hook is run.) So there is some extra untested, fragile logic in client.c
to handle this (the waiting_for_hook flag).
This probably works, but was barely tested. Not sure if this helps
anyone, but I think it's fine for my own purposes. (I really hated this
aspect of the API whenever I used it myself.)
This is more or less a minimal hack to make _some_ text measurement
functionality available to scripts. Since libass does not support such a
thing, this simply uses the bounding box of the rendered text.
This is far from ideal. Problems include:
- using a bitmap bounding box
- additional memory waste and/or flushing caches
- dependency on window size
- odd small deviations with different window sizes (run osd-test.lua and
resize the window after each timer update; the bounding boxes aren't
adjusted in an overly useful way)
- inability to query the size _after_ actual rendering
But I guess it's a start. Since I'm aware that it's crap, add a threat
to the manpage that this may be changed/removed again. For now, I'm
interested whether anyone will have use for it in its current form, as
it's an often requested feature.
The mp_filter_run() invocation blocks as long as the demuxer provides
packets and the queue can be filled. That means it may block quite a
long time of the decoder queue size is large (since we use libavcodec in
a blocking manner; it regrettably does not have an async. API).
This made the main thread freeze in certain situations, because it has
to wait on the decoder thread.
Other than I suspected (I wrote that code, but that doesn't mean I know
how the hell it works), this did not freeze during seeking: seek resets
flushed the queue, which also prevented the decoder thread from adding
more frames to it, thus stopping decoding and responding to the main
thread in time. But it does fix the issue that exiting the player waited
for the decoder to finish filling the queue when stopping playback.
(This happened because it called mp_decoder_wrapper_set_play_dir()
before any resets. Related to the somewhat messy way play_dir is
generally set. But it affects all "synchronous" decoder wrapper API
calls.)
This uses pretty weird mechanisms in filter.h and dispatch.h. The
resulting durr hurr interactions are probably hard to follow, and this
whole thing is a sin. On the other hand, this is a _very_ user visible
issue, and I'm happy that it can be fixed in such an unintrusive way.
I don't know what should happen when the same value is written to the
property. It seems that it would be more natural if it were ignored
(since that's also what is done with options now), but you could argue
the other way around as well. In any case, changing it silently could
leads to user scripts etc. breaking, so don't change it now.
Instead, add blabla to the manpage to put the responsibility on the
user, so when we suddenly change it one day, we can blame any breakages
on someone else.
See: #7501
Let's see how much everyone hates this. Leaving it enabled seems
problematic, because libavcodec returns an unspecific error if it
doesn't like it.
Fixes: #6300
See manpage additions. This has been a topic in MPlayer/mplayer2/mpv
since forever. But since libavcodec multi-threaded decoding was added,
I've always considered this pointless. libavcodec requires you to
"preload" it with packets, and then you can pretty much avoid blocking
on it, if decoding is fast enough.
But in some cases, a decoupled decoder thread _might_ help. Users have
for example come up with cases where decoding video in a separate
process and piping it as raw video to mpv helped. (Or my memory is
false, and it was about vapoursynth filtering, who knows.) So let's just
see whether this helps with anything.
Note that this would have been _much_ easier if libavcodec had an
asynchronous (or rather, non-blocking) API. It could probably have
easily gained that with a small change to its multi-threading code and a
small extension to its API, but I guess not.
Unfortunately, this uglifies f_decoder_wrapper quite a lot. Part of this
is due to annoying corner cases like legacy frame dropping and hardware
decoder state. These could probably be prettified later on.
There is also a change in playloop.c: this is because there is a need to
coordinate playback resets between demuxer thread, decoder thread, and
playback logic. I think this SEEK_BLOCK idea worked out reasonably well.
There are still a number of problems. For example, if the demuxer cache
is full, the decoder thread will simply block hard until the output
queue is full, which interferes with seeking. Could also be improved
later. Hardware decoding will probably die in a fire, because it will
run out of surfaces quickly. We could reduce the queue to size 1...
maybe later. We could update the queue options at runtime easily, but
currently I'm not going to bother.
I could only have put the lavc wrapper itself on a separate thread. But
there is some annoying interaction with EDL and backward playback shit,
and also you would have had to loop demuxer packets through the
playloop, so this sounded less annoying.
The food my mother made for us today was delicious.
Because audio uses the same code, also for audio (even if completely
pointless).
Fixes: #6926
The "seekbarkeyframes" option is now interpreted such if it's true, the
player default is used. Too lazy to make this a choice option or
whatever; the Lua option parser doesn't have support for that anyway.
Someone who cares can adjust this.
Try to deal with various corner cases. But when I fix one thing, another
thing breaks. (And it's 50/50 whether I find the breakage immediately or
a few months later.) So results may vary.
The default for--hr-seek is changed to "default" (not creative enough to
find a better name). In this mode, audio seeking is exact if there is no
video, or if the video has only a single frame. This change is actually
pretty dumb, since audio frames are usually small enough that exact
seeking does not really add much. But it gets rid of some weird special
cases.
Internally, the most important change is that is_coverart and is_sparse
handling is merged. is_sparse was originally just a special case for
weird .ts streams that have the corresponding low-level flag set. The
idea is that they're pretty similar anyway, so this would reduce the
number of corner cases. But I'm not sure if this doesn't break the
original intended use case for it (I don't have a sample anyway).
This changes last-frame handling, and respects the duration of the last
frame only if audio is disabled. This is mostly "coincidental" due to
the need to make seeking past EOF trigger player exit, and is caused by
setting STATUS_EOF early. On the other hand, this might have been this
way before (see removed chunk close to it).
This is useful with live streams, and it's not much worse than the h264
first packet hack, which reads some data anyway.
For some reason, the option wasn't even documented, so do that.
In addition, print the start time even if it's negative. That should not
be possible, but for some reason, the field is an int64_t copied from an
uint64_t so... whatever. Keeping the logging slightly more straight
forward is better anyway.
Remove some redundant fields that controlled or indicated whether the
demuxer was/could/should prefetch. Redefine how the eof/reading fields
work.
The in->eof field is now always valid, instead of weirdly being reset to
false in random situations. The in->reading field now corresponds to
whether the demuxer thread is working at all, and is reset if it stops
doing anything.
Also, I always found it stupid that dequeue_packet() forced the demuxer
thread to retry reading if it was EOF. This makes little sense, but was
probably added for files that are being appended to (running downloads).
It makes no sense, because if the cache really tried to read until file
EOF, it would encounter partial packets and throw errors, so all is lost
anyway. Plus stream_file now handles this better. So stop this behavior,
but add a temporary option that enables the old behavior.
I think checking for ds->eager when enabling prefetching never really
made sense (could be debated, but no, not really). On the other hand,
the change above exposed a missing wakeup in the backward demuxing code.
Some chances of regressions that could make it stuck in certain states
or so, or incorrect demuxer cache state reporting to the player
frontend.
This has been part of the libmpv for a while, so the implementation in
the IPC code is quite simple: just pass the mpv_node representing the
value of the "command" field without further checks to
mpv_command_node().
The only problem are the IPC-specific commands, which essentially have
their own dispatch mechanism. They expect an array. I'm not going to
rewrite the dispatch mechanism, so these still work only with an array.
I decided make the other case explicit with cmd==NULL. (I could also
have set cmd=="", which would have avoided changing each if condition
since "" matches no existing command, but that felt dirty.)
I decided to make this explicit. The alternative would have been making
all commands asynchronous always, like a small note in the manpage
threatened. I think that could have caused compatibility issues.
As a design decision, this does not send a reply if an async command
started. This could be a good or bad idea, but in any case, it will make
async command look almost like synchronous ones, except they don't block
the IPC protocol.
In all_formats mode, we've ignored what --ytdl-format did so far, since
we've converted the full format list, instead of just the formats
selected by youtube-dl.
But we can easily restore --ytdl-format behavior: just mark the selected
tracks as default tracks.
I don't think the skip_muxed option was overlay useful. While it was
nice to filter out the low quality muxed versions (as it happens on the
alphabetic site, I suspect it's compatibility stuff), it's not really
necessary, and just makes for another tricky and rarely used
configuration option. (This was different before muxed tracks were also
delay-loaded, and including the muxed versions slowed down loading.)
Add the force_all_formats option instead, which handles the HLS case.
Set it to true because they are also delay-loaded now, and don't slow
down startup as much.
See manpage additions. We would have to extend delay_open to support
multiple sub-tracks (for audio and video), and we'd still don't know (?)
whether it might contain more than one stream each (thinking of HLS
master streams). And if it's a true interleaved file (such as a "normal"
mp4 file provided as fallback for more primitive players), we'd either
have to signal such "bundled" tracks, or waste bandwidth.
This restructures a lot. The if/else tree in add_single_video for format
selection was a bit annoying, so it's split into separate if blocks,
where it checks each time whether a URL was determined yet.
This is just a more convenient way to start IPC client scripts per mpv
instance.
Does not work on Windows, although it could if the subprocess and IPC
parts are implemented (and I guess .exe/.bat suffixes are required).
Also untested whether it builds on Windows. A lot of other things are
untested too, so don't complain.
Pretty worthless I guess. I only tested one site (and 2 videos), it's
somewhat likely that it will break with other sites. Even if you leave
the option disabled (the default).
Slightly related to #3548. This will allows you to use the bitrate
stream selection mechanism, that was added for HLS, with normal videos.
Works as ad-filter. I had some more plans, for example replacing
matching text with different text, but for now it's dropping matches
only. There's a big warning in the manpage that I might change
semantics. For example, I might turn it into a primitive sed.
In a sane world, you'd probably write a simple script that processes
downloaded subtitles before giving them to mpv, and avoid all this
complexity. But we don't live in a sane world, and the sooner you learn
this, the happier you will be. (But I also want to run this on muxed
subtitles.)
This is pretty straightforward. We use POSIX regexes, which are readily
available without additional pain or dependencies. This also means it's
(apparently) not available on win32 (MinGW). The regex list is because I
hate big monolithic regexes, and this makes it slightly better.
Very superficially tested.
This renders incorrectly in the html output. I suspect you need one more
level here. Increase the indentation level. No other changes, other than
re-breaking some lines.
As requested I guess. It behaves quite similar to the --loop* options.
Not quite happy with the idea that 1) the option is mutated on each
operation (but at least it's consistent with --loop* and doesn't require
more properties), and 2) the ab-loop command will do nothing once all
loop iterations are done. As a concession, the OSD shows something about
"disabled".
Fixes: #7360
this creates a default log for the last mpv run when started from the
bundle. that way one can get a log of what happened even after an issue
occurred. also add a menu entry under Help to show the current log, but
only when the bundle is used.
Fixes#7396Fixes#2547
Directories inside ~~/scripts/ are now loaded as scripts, so don't use
it also for modules. Now there are no default module paths.
To compensate, we now try to run ~~/.init.js right after defaults.js,
so the user may extend the js init procedure via this script, e.g. for
adding default paths to mp.module_paths .
See #7435 and related for context.
Basically, it seems that while the original vsfilter processed subtitles
like with this option set to "yes", many current players (mpc-hc
default, vlc, probably most libass users) treat them like with "no". In
the linked issue, this makes rendering severely slower, and can consume
a lot of memory (or just overflow libass memory calculations). It seems
that changing this to "no" will lead to more good than bad, especially
because newer subtitles may be authored for the "no" behavior.
Most libass users seem to use "no" exactly because they do not call
ass_set_storage_size() at all. This API was needed because the scaling
of the subtitles depends on the video size (vsfilter bugs, or
something). In addition, it's my personal opinion that rendering should
not depend on the video at all, so I like setting the default of this to
"no".
This originally existed as a hack for weston. In certain scenarios, a
frame taking too long to render would cause vo_wayland_wait_frame to
timeout which would result in a ton of dropped frames. The naive
solution was to just to add a slight delay to the time value. If a
frame took too long, it would likely to fall under the timeout value and
all was well. This was exposed to the user since the default delay
(1000) was completely arbitrary.
However with presentation time, this doesn't appear to be neccesary.
Fresh frames that take longer than the display's refresh rate (16.666 ms
in most cases) behave well in Weston. In the other two main compositors
without presentation time (GNOME and Plasma), they also do not
experience any ill effects. It's better not to overcomplicate things, so
this "feature" can be removed now.
It's ridiculous that --script=something.dumb does not cause an error.
Make it error, and extend this behavior to the scripts/ sub-dir in the
mpv config dir.
This "bundles" all OSD properties. It also makes some previously
Lua-only values available (Lua has mp.get_osd_margins(), unsure if
anything uses it).
The main intention is actually to allow retrieving all fields in an
"atomic" way. (Could introduce a mechanism on the level of the mpv
client API to do this, but doing ti ad-hoc all the time like this commit
is easier.)
Addresses dumb things like accidentally overwriting a media file with
e.g. "mpv --log-file test.mkv" (when the user thought that --log-file
was a flag option, when it actually takes a filename). This example will
now print an error. It still works with "-log-file overwritten.mkv", but
prints a warning.
Not sure if I'm being too careful or not "radical" enough. In any case,
both the syntax that stops working and the syntax that produces a
warning now have been discouraged and were called legacy for almost a
decade.
See manpage additions. The libarchive behavior mentioned in the last
paragraph there is technically unrelated, but makes this new option
mostly pointless.
See: #7182
In the distant past, the cuviddec backed copy hwaccel could be
configured directly using lavc options. However, since that time,
we gained support for automatic hw ctx creation which ended up
bypassing the lavc options.
Rather than trying to find a way to pass those options again, a
better idea is to make the 'cuda-decode-device' option, used by
the interop hwaccels, work for the copy hwaccels too.
And that's pretty simple: we have to add a create function that
checks the option and passes it on to ffmpeg.
Note that this does require a slight re-jig to the configuration
flags, as we now have a scenario where we want to build with support
for the cuda copy hwaccels but not the interop ones. So we need
a distinct configuration flag for that combination.
Fixes#7295.
Add an "auto-safe" mode, mostly triggered by Ubuntu's nonsense to force
hwdec=vaapi in the global config file in their mpv package. But to be
honest it's probably something more people want.
This is implemented as explicit whitelist. On Windows, HEVC/Intel is
sometimes broken, but it's still whitelisted, and in theory we'd need a
detailed whitelist of device names etc. (like for example browsers tend
to do). On OSX, videotoolbox is a pretty bad choice, but unfortunately
the only one, so it's whitelisted too. There may be a larger number of
hwdec wrappers that work anyway, and I'm for example ignoring Android.
A minority of users have expressed a dislike of hats, calling them
"cancer [that] don't belong in software" describing the people who add
them as "shitty circlejerks" and "chucklefuck."
While I personally disagree with those opinions, it's probably easier
to let them have it their way. For that reason this adds the option
`greenandgrumpy` to the osc, which allows users to disable the hat.
Lua scripting has an undocumented mp.set_osd_ass() function, which is
used by osc.lua and console.lua. Apparently, 3rd party scripts also use
this. It's probably time to make this a public API.
The Lua implementation just bypassed the libmpv API. To make it usable
by any type of client, turn it into a command, "osd-overlay".
There's already a "overlay-add". Ignore it (although the manpage admits
guiltiness). I don't really want to deal with that old command. Its main
problem is that it uses global IDs, while I'd like to avoid that scripts
mess with each others overlays (whether that is accidentally or
intentionally). Maybe "overlay-add" can eventually be merged into
"osd-overlay", but I'm too lazy to do that now.
Scripting now uses the commands. There is a helper to manage OSD
overlays. The helper is very "thin"; I only want to force script authors
to use the ID allocation, which may help with putting multiple scripts
into a single .lua file without causing conflicts (basically, avoiding
singletons within a script's environment). The old set_osd_ass() is
emulated with the new API.
The JS scripting wrapper also provides a set_osd_ass() function, which
calls internal mpv API. Comment that part (to keep it compiling), but
I'm leaving it to @avih to finish the change.
Now that 00af718a made the lua read_options behavior much more similar
to the js behavior, the main difference was that lua does not re-read
the config file at on_update (but it does re-apply its stored content)
while js did re-read it.
Now the js on_update also does not re-read the config file and instead
applies its stored original content.
This is slightly hacky by adding an undocumented optional 4th argument
to read_options which allows overriding the config file content.
As described in the manpage changes. This makes more sense than the
previous approach, where options could "unexpectedly" stick. Although
this is still a somewhat arbitrary policy (ask many people and you'd get
a number of different expectations on what should happen), I think that
it reflects what mpv's builtin stuff does.
All the copying is annoying, but let's just hope nobody is stupid enough
to change these properties per video frame or something equally
ridiculous.
Apparently there are two different options for controlling which
screen an mpv window goes onto: --fs-screen and --screen. The former
explicitly only controls which screen a fullscreened window goes onto,
but does not appear to actually care about this option at runtime for
X11, so pressing f will always fullscreen to the screen mpv is currently
on. This means the option is of questionable usefulness for starters.
Making it worse, if you use --screen=1 --fs, mpv will actually fullscreen
on screen 0, because --fs-screen isn't set. Instead of doing that, fall
back to whatever --screen is set to.
This is a bit different than the lua code: on script-opts change it
simply re-applies the conf-file and script-opts to the options object,
and if this results in any changed value at options then on_update is
called with the changelist as argument.
This allows a value to revert back to the conf-file value if the
matching script-opts key had a different value and then got deleted.
It also guarantees to call back whenever the options object is
modified, which the lua code doesn't do (e.g. if the caller changed
a value and the observer changed it back - it won't detect a change).
Although they were not undocumented, they were hidden away in the
respective manpage sections. It's a good idea to add them to the main
keyboard bindings overview too. stats.lua also did this.
I decided to factor this into the user's scale option (instead of
somehow using it as default if the user has not specified it), because
it makes the option handling simpler, and won't break things like
per-screen DPI if the user only wants to scale the console font by a
factor.
Very primitive and dumb, but fulfils its purpose for the next commits.
I chose this specific implementation because it has the lowest footprint
in command.c, without resorting to crazy hacks such as sending messages
between scripts (which would be hard to coordinate especially on
startup).
I don't even know anymore whether this was intended or not. Certain use
cases for the "-o" options might require this. These options are for
passing general FFmpeg options. These are translated to av_opt_set()
calls, which may or may not accumulate the option values on multiple
calls with the same option name (how should I know?).
Anyway, it seems crazy to allow non-unique keys, so make them unique.
The ad-hoc nature of the option code makes this wonderfully complicated
(when I wrote that this code is cursed, I meant it). In combination with
lazy testing, it probably means there are lots of bugs here.
Whenever I deal with this, I have to look at the code to make sense of
this. And beyond that, there are some strange inconsistencies. (I think
this code is cursed. It always was, and maybe always will be.)
Although the manpage claimed that using multiple items for -add etc. is
deprecated, string list options didn't warn against it. So add the
warning, and add something in the changelog (even though nobody will
ever read this).
The manpage mentioned --vf-append, but this didn't even exist. So add
it, I guess. We encourage using -append for the other option types, so
for consistency, it should work on filter options. (And I already
tricked me into believing it existed when I mentioned it in the
manpage.)
Make the "operations" table separate for all option types, and mention
the option type on every single of the top-level list options.
This is similar to the "edition" change.
I considered making this go through deprecation, but didn't have a good
idea how to do that. Maybe it's fine, because this is pretty obscure.
But it might break some API users/scripts (it certainly broke
stats.lua), and all I have to say is sorry for that.
See manpage/changelog changes.
The purpose of this change is to removes another case of inconsistent
property behavior. At first I wanted to make this go through deprecation
before making a technically incompatible change, but then I considered
this feature too obscure as that anyone would care.
the Apple Remote has long been deprecated and abandoned by Apple.
current macs don't come with support for it anymore. support might be
re-added with the next commit.
Seems like this was silently changed to enabled by default on the change
to libplacebo, without adjusting the manpage. Fix the documented
default.
Also add a comment about Nvidia; see referenced issue.
Fixes: #7245
Merged from mpv-repl git repo commit 5ea2bf64f9c239f0326b02. Some
changes were made on top of it:
- Tabs were converted to 4 spaces indentation (plus some manual
indentation fixes in some places).
- All user-visible mentions of "repl" were renamed to "console".
- The README was converted to a manpage (with heavy changes, some
additions taken from stats.rst; rossy converted the key bindings
table to RST).
- The method to change the default key binding was changed.
- Change minor detail about "font" default value setting (not a
functional change).
- Integrate into the player as builtin script, including an option to
prevent loading it.
Above changes and commit message done by wm4.
Signed-off-by: wm4 <wm4@nowhere>
To aid in discoverability, and to address the most common case
directly, I'm adding an 'auto' mode for the window controls. In
this case, we will show the controls if there is no window border
and hide them if there are borders. This also respects the option
being toggled at runtime.
To ensure that it works in the wayland case, I've also made sure
that the wayland code explicitly forces the option to false if
decoration support is missing.
Based on feedback, I've split the config in two, with one option
for whether controls are active, and one for alignment. These are
new enough that we can get away with ignoring compatibility.
