spelling fixes, mostly by <ismail.donmez@boun.edu.tr>

git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@11272 b3059339-0415-0410-9bf9-f77b7e298cf2

DOCS/man/en/mplayer.1

@@ -2173,7 +2173,7 @@ Do not play/\:encode video.
 .TP
 .B \-oldpp <quality> (OBSOLETE)
 Use the opendivx postprocessing code instead of the internal one.
-Superceded by \-pp, the internal postprocessing offers better
+Superseded by \-pp, the internal postprocessing offers better
 quality and performance.
 
 The valid range of \-oldpp values varies by codec, mostly

DOCS/man/pl/mplayer.1

@@ -403,7 +403,7 @@ W
 ilości pamięci.
 .TP
 .B \-bandwidth <wartość>
-Określ maksymalny bandwith (bufor) dla strumieniowania sieciowego (dla serwerów
+Określ maksymalny bandwidth (bufor) dla strumieniowania sieciowego (dla serwerów
 będzie to w stanie przesłać zawartość różnych bitrataów)
 W pełni użyteczne jeśli chcesz odlądać na żywo media ze stumieni przy wolnym połączeniu.
 .TP

DOCS/tech/encoding-tips.txt

@@ -220,7 +220,7 @@ bpb =           -----------------
 bits (i.e. 900kbps is 900000))
 
 This way it apeared that the minimum bits per block is ~40, very
-good results are with ~50, and everything above 60 is a waste of bandwith.
+good results are with ~50, and everything above 60 is a waste of bandwidth.
 And what's actually funny is that it was independant of codec used. The
 results were exactly the same, whether I used DIV3 (with tricky nandub's
 magick), ffmpeg odivx, DivX5 on Windows or XviD.

DOCS/tech/playtree

@@ -56,8 +56,8 @@ arg is true it will also free the childs.
 When your tree is ready you can then use play_tree_cleanup to remove all unuseful
 entries.
 
-If you want to load a playlist you can use parse_playtree wich take a stream_t
-as argument or parse_playlist_file wich take a filename as argument.
+If you want to load a playlist you can use parse_playtree which take a stream_t
+as argument or parse_playlist_file which take a filename as argument.
 Both function will return NULL in case of failure or a new (cleaned) tree that
 you can add somewhere in your tree.
 
@@ -74,8 +74,8 @@ My playtree is ready now, what with this play_tree_iter ?
 This is an iterator used to go trough the tree. It handle itself
 loop of list and setting mplayer config according to the params
 of each entry.
-It's created with play_tree_iter_new wich take as argument a play_tree_t
-and an m_config_t wich is then used to set/unset the params of each entry.
+It's created with play_tree_iter_new which take as argument a play_tree_t
+and an m_config_t which is then used to set/unset the params of each entry.
 After creation the iter point to nothing, you should init with a first step.
 To go to another entry in the list you should use play_tree_iter_step. The
 second argument is the direction of the step : positive value go frontward,
@@ -90,7 +90,7 @@ PLAY_TREE_ITER_END : we are now at end
 (( Note : I must add a PLAY_TREE_ITER_BEGINING for the begining. Don't know
 what it will return in a such case.  PLAY_TREE_ITER_ERROR ? ))
 
-There is also play_tree_iter_up_step wich can be used to break a loop or skip
+There is also play_tree_iter_up_step which can be used to break a loop or skip
 the current list. The argument are the same than play_tree_iter_step. The
 difference is that it go back to parent of the current list, and then step according
 to the arguments.
@@ -99,7 +99,7 @@ Then when your iter returned PLAY_TREE_ITER_ENTRY you can use
 play_tree_iter_get_file to get the file. If you call it more than one time
 it will return the next file for this entry or loop trough the list if no more
 file are available. You can now how many files are available using
-iter->num_files and wich one it returned using iter->file.
+iter->num_files and which one it returned using iter->file.
 In case the entry is a DVD, VCD or TV channel the returned string is not a filename
 but "DVD title x", "VCD track x" or "TV channel x".
 To distinc those case from a normal file you can check iter->tree->entry_type.
@@ -116,7 +116,7 @@ Then when you have finish with the iter free it with play_tree_iter_free.
 Ok, that's all for now. To have some exemples look into mplayer.c ;)
 First just after config parsing, the iterator is created there. Also
 after stream opening, in case the stream is a playlist it replace the
-entry wich contained the playlist by the result of the parsing.
+entry which contained the playlist by the result of the parsing.
 In the event handeling it check if a step can be done, etc. And finnaly
 at the end it go the next entry.
 

DOCS/xml/en/audio.xml

@@ -119,7 +119,7 @@ On Linux, a 2.4.x kernel is highly recommended. Kernel 2.2 is not tested.
 
 <para>
 Linux sound drivers are primarily provided by the free version of OSS.
-These drivers have been superceded by <ulink url="http://www.alsa-project.org">ALSA</ulink>
+These drivers have been superseded by <ulink url="http://www.alsa-project.org">ALSA</ulink>
 (Advanced Linux Sound Architecture) in the 2.5 development series. If
 your distribution does not already use ALSA you may wish to try their
 drivers if you experience sound problems. ALSA drivers are generally

DOCS/xml/en/formats.xml

@@ -355,7 +355,7 @@ frame's delay in centiseconds.
 
 <para>
 Standard GIF files contain 24-bit RGB frames with at most an 8-bit indexed
-pallete. These frames are usually LZW-compressed, although some GIF encoders
+palette. These frames are usually LZW-compressed, although some GIF encoders
 produce uncompressed frames to avoid patent issues with LZW compression.
 </para>
 

DOCS/xml/en/install.xml

@@ -466,7 +466,7 @@ Debian users can build a .deb package for themselves, it's very simple.
 Just exec
 <screen>fakeroot debian/rules binary</screen>
 in <application>MPlayer</application>'s root directory. See
-<link linkend="debian">Debian packaging</link> for detailled instructions.
+<link linkend="debian">Debian packaging</link> for detailed instructions.
 </para>
 
 <para>
@@ -499,7 +499,7 @@ and OSD</link> section for details.
 <para>
 The GUI needs GTK 1.2.x (it isn't fully GTK, but the panels are). The skins
 are stored in PNG format, so GTK, <systemitem class="library">libpng</systemitem>
-(and their devel stuff, usualy called <systemitem class="library">gtk-dev</systemitem>
+(and their devel stuff, usually called <systemitem class="library">gtk-dev</systemitem>
 and <systemitem class="library">libpng-dev</systemitem>) has to be installed.
 You can build it by specifying <option>--enable-gui</option> during
 <filename>./configure</filename>. Then, to turn on GUI mode, you have to

DOCS/xml/en/mencoder.xml

@@ -411,7 +411,7 @@ mencoder -mf on:w=800:h=600:fps=25:type=tga -ovc copy -o output.avi \*.tga<!--
 
 <para>
 <application>MEncoder</application> is capable of extracting subtitles from
-a DVD into Vobsub fomat files. They consist of a pair of files ending in
+a DVD into Vobsub formatted files. They consist of a pair of files ending in
 <filename>.idx</filename> and <filename>.sub</filename> and are usually
 packaged in a single <filename>.rar</filename> archive.
 <application>MPlayer</application> can play these with the

DOCS/xml/en/ports.xml

@@ -148,7 +148,7 @@ using Sun's assembler <filename>/usr/ccs/bin/as</filename>.
 
 <para>The <filename>configure</filename> script tries to find out, which
 assembler program is used by your &quot;gcc&quot; command (in case the autodetection
-fails, use the <option>--as=/whereever/you/have/installed/gnu-as</option>
+fails, use the <option>--as=/wherever/you/have/installed/gnu-as</option>
 option to tell the <filename>configure</filename> script where it can find GNU
 "as" on your system).
 </para>

DOCS/xml/en/tvinput.xml

@@ -186,7 +186,7 @@ LAME codec. This setup is suitable for capturing movies.
 <para>
 This will additionally rescale the image to 384x288 and compresses the
 video with the bitrate of 350kbps in high quality mode. The vqmax option
-looses the quantizer and allows the video compressor to actualy reach so
+looses the quantizer and allows the video compressor to actually reach so
 low bitrate even at the expense of the quality. This can be used for
 capturing long TV series, where the video quality isn't so important.
 <screen>

DOCS/xml/en/usage.xml

@@ -435,9 +435,9 @@ Remote streams allow you to access most <application>MPlayer</application>
 stream type from a remote host. The main purpose of this feature is to make
 it possible to directly use the CD or DVD drive of another computer on the
 network (provided you have the required bandwidth). On the downside some
-stream type (currently TV and MF) are not useable remotely because they are
+stream type (currently TV and MF) are not usable remotely because they are
 implemented at the demuxer level. It's sad for MF but TV stream would anyway
-require an insane amount of bandwith.
+require an insane amount of bandwidth.
 </para>
 
 <sect2 id="compile_mpst_server">
@@ -466,14 +466,14 @@ You can also access files on this server :
 <screen>
 mplayer -cache 5000 mpst://servername//usr/local/movies/lol.avi
 </screen>
-Note that paths wich aren't starting with a / will be relative to
+Note that paths which aren't starting with a / will be relative to
 the directory where the server is running. The <option>-cache</option> option is not
 needed but highly recommended.
 </para>
 
 <para>
 Be aware that currently the server is not secure at all. So don't complain
-about the numerous exploits wich are possible through this. Instead send
+about the numerous exploits which are possible through this. Instead send
 some (good) patch to make it better or start writing your own server.
 </para>
 

DOCS/xml/en/video.xml

@@ -1511,7 +1511,7 @@ There's a relatively new nVidia driver out there, it's known to work on Riva
   wmv7, wmv8</systemitem> and some others. Please note that this is only
   a temporal inconvenience. The usage syntax is as follows:
   <screen>
-    mplayer -vf formay=uyvy -vc divxds divx3file.avi
+    mplayer -vf format=uyvy -vc divxds divx3file.avi
   </screen>
   </para></listitem>
 </itemizedlist>
@@ -1522,7 +1522,7 @@ There's a relatively new nVidia driver out there, it's known to work on Riva
   framebuffer or X magic whatsoever. For this purpose, we'll have to use the
   <option>cvidix</option> video output, as the following example shows:
   <screen>
-    mplayer -vf formay=uyvy -vc divxds -vo cvidix example.avi
+    mplayer -vf format=uyvy -vc divxds -vo cvidix example.avi
   </screen>
 </para>
 

DOCS/xml/es/video.xml

@@ -1544,7 +1544,7 @@ con otros.
   wmv7, wmv8</systemitem> y algunos otros. Por favor tenga en cuenta que esto
   es solo algo temporal. La sintaxis de uso es la siguiente:
   <screen>
-    mplayer -vf formay=uyvy -vc divxds archivodivx3.avi
+    mplayer -vf format=uyvy -vc divxds archivodivx3.avi
   </screen>
   </para></listitem>
 </itemizedlist>
@@ -1555,7 +1555,7 @@ con otros.
   - sin framebuffer o X magic ni nada. Para conseguir esto, se ha de usar la
   salida de video <option>cvidix</option>, como muestra el siguiente ejemplo:
   <screen>
-    mplayer -vf formay=uyvy -vc divxds -vo cvidix ejemplo.avi
+    mplayer -vf format=uyvy -vc divxds -vo cvidix ejemplo.avi
   </screen>
 </para>
 

DOCS/xml/fr/video.xml

@@ -1485,7 +1485,7 @@ Il y a un relativement nouveau pilote nVidia, il fonctionne avec les chipsets Ri
   et quelques autres. Veuillez noter que ce n'est qu'un inconfort provisoire.
   La syntaxe est la suivante:
   <screen>
-    mplayer -vf formay=uyvy -vc divxds fichierdivx3.avi
+    mplayer -vf format=uyvy -vc divxds fichierdivx3.avi
   </screen>
   </para></listitem>
 </itemizedlist>
@@ -1496,7 +1496,7 @@ Il y a un relativement nouveau pilote nVidia, il fonctionne avec les chipsets Ri
   - avec aucun framebuffer ou X. Pour ce faire, nous aurons besoin d'utiliser
   la sortie <option>cvidix</option>, comme le montre l'exemple suivant:
   <screen>
-    mplayer -vf formay=uyvy -vc divxds -vo cvidix exemple.avi
+    mplayer -vf format=uyvy -vc divxds -vo cvidix exemple.avi
   </screen>
 </para>
 

DOCS/xml/ru/ports.xml

@@ -156,7 +156,7 @@ Sun'
 <para>Скрипт <filename>configure</filename> пытается обнаружить, какой ассемблер
 используется Вашей командой &quot;gcc&quot; (в том случае, если автоопределение
 не сработает, используйте опцию
-<option>--as=/whereever/you/have/installed/gnu-as</option>, ÞÔÏÂÙ ÓÏÏÂÝÉÔØ
+<option>--as=/wherever/you/have/installed/gnu-as</option>, ÞÔÏÂÙ ÓÏÏÂÝÉÔØ
 скрипту <filename>configure</filename>, где можно обнаружить GNU "as" на Вашей
 системе).
 </para>

DOCS/zh/documentation.html

@@ -1304,7 +1304,7 @@ HREF="http://www.sun.com/sparc/vis/mediaLib.html">mLib</A>
 <P>在Solaris x86上，你需要GNU汇编程序和GNU C/C++编译器，设置使用GNU的汇编程序！在x86平台上的mplayer代码大量使用MMX，SSE和3DNOW！
 指令集，使用Sun的汇编程序<CODE>/usr/ccs/bin/as</CODE>不能编译通过。</P>
 
-<P>configure脚本将试图查找你的"gcc"命令使用的汇编程序(如果自动检测失败，使用"--as=/whereever/you/have/installed/gnu-as"
+<P>configure脚本将试图查找你的"gcc"命令使用的汇编程序(如果自动检测失败，使用"--as=/wherever/you/have/installed/gnu-as"
 选项告诉configure脚本你的系统中GNU的"as"在哪里)。</P>
 
 <P>在Solaris x86系统上使用没有GNU汇编程序的GCC时configure的出错信息为：</P>