mpv/filters/filter.h

428 lines
20 KiB
C
Raw Normal View History

video: rewrite filtering glue code Get rid of the old vf.c code. Replace it with a generic filtering framework, which can potentially handle more than just --vf. At least reimplementing --af with this code is planned. This changes some --vf semantics (including runtime behavior and the "vf" command). The most important ones are listed in interface-changes. vf_convert.c is renamed to f_swscale.c. It is now an internal filter that can not be inserted by the user manually. f_lavfi.c is a refactor of player/lavfi.c. The latter will be removed once --lavfi-complex is reimplemented on top of f_lavfi.c. (which is conceptually easy, but a big mess due to the data flow changes). The existing filters are all changed heavily. The data flow of the new filter framework is different. Especially EOF handling changes - EOF is now a "frame" rather than a state, and must be passed through exactly once. Another major thing is that all filters must support dynamic format changes. The filter reconfig() function goes away. (This sounds complex, but since all filters need to handle EOF draining anyway, they can use the same code, and it removes the mess with reconfig() having to predict the output format, which completely breaks with libavfilter anyway.) In addition, there is no automatic format negotiation or conversion. libavfilter's primitive and insufficient API simply doesn't allow us to do this in a reasonable way. Instead, filters can use f_autoconvert as sub-filter, and tell it which formats they support. This filter will in turn add actual conversion filters, such as f_swscale, to perform necessary format changes. vf_vapoursynth.c uses the same basic principle of operation as before, but with worryingly different details in data flow. Still appears to work. The hardware deint filters (vf_vavpp.c, vf_d3d11vpp.c, vf_vdpaupp.c) are heavily changed. Fortunately, they all used refqueue.c, which is for sharing the data flow logic (especially for managing future/past surfaces and such). It turns out it can be used to factor out most of the data flow. Some of these filters accepted software input. Instead of having ad-hoc upload code in each filter, surface upload is now delegated to f_autoconvert, which can use f_hwupload to perform this. Exporting VO capabilities is still a big mess (mp_stream_info stuff). The D3D11 code drops the redundant image formats, and all code uses the hw_subfmt (sw_format in FFmpeg) instead. Although that too seems to be a big mess for now. f_async_queue is unused.
2018-01-16 10:53:44 +00:00
#pragma once
#include <stdbool.h>
#include "frame.h"
struct mpv_global;
struct mp_filter;
// A filter input or output. These always come in pairs: one mp_pin is for
// input, the other is for output. (The separation is mostly for checking
// their API use, and for the connection functions.)
// Effectively, this is a 1-frame queue. The data flow rules have the goal to
// reduce the number of buffered frames and the amount of time they are
// buffered.
// A mp_pin must be connected to be usable. The default state of a mp_pin is
// a manual connection, which means you use the mp_pin_*() functions to
// manually read or write data.
struct mp_pin;
enum mp_pin_dir {
MP_PIN_INVALID = 0, // used as a placeholder value
MP_PIN_IN, // you write data to the pin
MP_PIN_OUT, // you read data from the pin
};
// The established direction for this pin. The direction of a pin is immutable.
// You must use the mp_pin_in_*() and mp_pin_out_*() functions on the correct
// pin type - mismatching it is an API violation.
enum mp_pin_dir mp_pin_get_dir(struct mp_pin *p);
// True if a new frame should be written to the pin.
bool mp_pin_in_needs_data(struct mp_pin *p);
// Write a frame to the pin. If the input was not accepted, false is returned
// (does not normally happen, as long as mp_pin_in_needs_data() returned true).
// The callee owns the reference to the frame data, even on failure.
// Writing a MP_FRAME_NONE has no effect (and returns false).
// If you did not call mp_pin_in_needs_data() before this, it's likely a bug.
video: rewrite filtering glue code Get rid of the old vf.c code. Replace it with a generic filtering framework, which can potentially handle more than just --vf. At least reimplementing --af with this code is planned. This changes some --vf semantics (including runtime behavior and the "vf" command). The most important ones are listed in interface-changes. vf_convert.c is renamed to f_swscale.c. It is now an internal filter that can not be inserted by the user manually. f_lavfi.c is a refactor of player/lavfi.c. The latter will be removed once --lavfi-complex is reimplemented on top of f_lavfi.c. (which is conceptually easy, but a big mess due to the data flow changes). The existing filters are all changed heavily. The data flow of the new filter framework is different. Especially EOF handling changes - EOF is now a "frame" rather than a state, and must be passed through exactly once. Another major thing is that all filters must support dynamic format changes. The filter reconfig() function goes away. (This sounds complex, but since all filters need to handle EOF draining anyway, they can use the same code, and it removes the mess with reconfig() having to predict the output format, which completely breaks with libavfilter anyway.) In addition, there is no automatic format negotiation or conversion. libavfilter's primitive and insufficient API simply doesn't allow us to do this in a reasonable way. Instead, filters can use f_autoconvert as sub-filter, and tell it which formats they support. This filter will in turn add actual conversion filters, such as f_swscale, to perform necessary format changes. vf_vapoursynth.c uses the same basic principle of operation as before, but with worryingly different details in data flow. Still appears to work. The hardware deint filters (vf_vavpp.c, vf_d3d11vpp.c, vf_vdpaupp.c) are heavily changed. Fortunately, they all used refqueue.c, which is for sharing the data flow logic (especially for managing future/past surfaces and such). It turns out it can be used to factor out most of the data flow. Some of these filters accepted software input. Instead of having ad-hoc upload code in each filter, surface upload is now delegated to f_autoconvert, which can use f_hwupload to perform this. Exporting VO capabilities is still a big mess (mp_stream_info stuff). The D3D11 code drops the redundant image formats, and all code uses the hw_subfmt (sw_format in FFmpeg) instead. Although that too seems to be a big mess for now. f_async_queue is unused.
2018-01-16 10:53:44 +00:00
bool mp_pin_in_write(struct mp_pin *p, struct mp_frame frame);
// True if a frame is actually available for reading right now, and
// mp_pin_out_read() will return success. If this returns false, the pin is
// flagged for needing data (the filter might either produce output the next
// time it's run, or request new input).
// You should call this only if you can immediately consume the data. The goal
// is to have no redundant buffering in the filter graph, and leaving frames
// buffered in mp_pins goes against this.
bool mp_pin_out_request_data(struct mp_pin *p);
// Same as mp_pin_out_request_data(), but call the filter's process() function
// next time even if there is new data. the intention is that the filter reads
// the data in the next iteration, without checking for the data now.
void mp_pin_out_request_data_next(struct mp_pin *p);
video: rewrite filtering glue code Get rid of the old vf.c code. Replace it with a generic filtering framework, which can potentially handle more than just --vf. At least reimplementing --af with this code is planned. This changes some --vf semantics (including runtime behavior and the "vf" command). The most important ones are listed in interface-changes. vf_convert.c is renamed to f_swscale.c. It is now an internal filter that can not be inserted by the user manually. f_lavfi.c is a refactor of player/lavfi.c. The latter will be removed once --lavfi-complex is reimplemented on top of f_lavfi.c. (which is conceptually easy, but a big mess due to the data flow changes). The existing filters are all changed heavily. The data flow of the new filter framework is different. Especially EOF handling changes - EOF is now a "frame" rather than a state, and must be passed through exactly once. Another major thing is that all filters must support dynamic format changes. The filter reconfig() function goes away. (This sounds complex, but since all filters need to handle EOF draining anyway, they can use the same code, and it removes the mess with reconfig() having to predict the output format, which completely breaks with libavfilter anyway.) In addition, there is no automatic format negotiation or conversion. libavfilter's primitive and insufficient API simply doesn't allow us to do this in a reasonable way. Instead, filters can use f_autoconvert as sub-filter, and tell it which formats they support. This filter will in turn add actual conversion filters, such as f_swscale, to perform necessary format changes. vf_vapoursynth.c uses the same basic principle of operation as before, but with worryingly different details in data flow. Still appears to work. The hardware deint filters (vf_vavpp.c, vf_d3d11vpp.c, vf_vdpaupp.c) are heavily changed. Fortunately, they all used refqueue.c, which is for sharing the data flow logic (especially for managing future/past surfaces and such). It turns out it can be used to factor out most of the data flow. Some of these filters accepted software input. Instead of having ad-hoc upload code in each filter, surface upload is now delegated to f_autoconvert, which can use f_hwupload to perform this. Exporting VO capabilities is still a big mess (mp_stream_info stuff). The D3D11 code drops the redundant image formats, and all code uses the hw_subfmt (sw_format in FFmpeg) instead. Although that too seems to be a big mess for now. f_async_queue is unused.
2018-01-16 10:53:44 +00:00
// Same as mp_pin_out_request_data(), but does not attempt to procure new frames
// if the return value is false.
bool mp_pin_out_has_data(struct mp_pin *p);
// Read a frame. Returns MP_FRAME_NONE if currently no frame is available.
// You need to call mp_pin_out_request_data() and wait until the frame is ready
// to be sure this returns a frame. (This call implicitly calls _request if no
// frame is available, but to get proper data flow in filters, you should
// probably follow the preferred conventions.)
// If no frame is returned, a frame is automatically requested via
// mp_pin_out_request_data() (so it might be retuned in the future).
// If a frame is returned, no new frame is automatically requested (this is
// usually not wanted, because it could lead to additional buffering).
// This is guaranteed to return a non-NONE frame if mp_pin_out_has_data()
// returned true and no other filter functions were called.
// The caller owns the reference to the returned data.
struct mp_frame mp_pin_out_read(struct mp_pin *p);
// Undo mp_pin_out_read(). This should be only used in special cases. Normally,
// you should make an effort to reduce buffering, which means you signal that
// you need a frame only once you know that you can use it (meaning you'll
// really use it and have no need to "undo" the read). But in special cases,
// especially if the behavior depends on the exact frame data, using this might
// be justified.
// If this is called, the next mp_pin_out_read() call will return the same frame
// again. You must not have called mp_pin_out_request_data() on this pin and
// you must not have disconnected or changed the pin in any way.
// This does not mark the filter for progress, i.e. the filter's process()
// function won't be repeated (unless other pins change). If you really need
// that, call mp_filter_internal_mark_progress() manually in addition.
void mp_pin_out_unread(struct mp_pin *p, struct mp_frame frame);
// A helper to make draining on MP_FRAME_EOF frames easier. For filters which
// buffer data, but have no easy way to buffer MP_FRAME_EOF frames natively.
// This is to be used as follows:
// 1. caller receives MP_FRAME_EOF
// 2. initiates draining (or continues, see step 4.)
// 2b. if there are no more buffered frames, just propagates the EOF frame and
// exits
// 3. calls mp_pin_out_repeat_eof(pin)
// 4. returns a buffered frame normally, and continues normally
// 4b. pin returns "repeated" MP_FRAME_EOF, jump to 1.
// 5. if there's nothing more to do, stop
// 5b. there might be a sporadic wakeup, and an unwanted wait for output (in
// a typical filter implementation)
// You must not have requested data before calling this. (Usually you'd call
// this after mp_pin_out_read(). Requesting data after queuing the repeat EOF
// is OK and idempotent.)
// This is equivalent to mp_pin_out_unread(p, MP_EOF_FRAME). See that function
// for further remarks.
void mp_pin_out_repeat_eof(struct mp_pin *p);
// Trivial helper to determine whether src is readable and dst is writable right
// now. Defers or requests new data if not ready. This means it has the side
// effect of telling the filters that you want to transfer data.
// You use this in a filter process() function. If the result is false, it will
// have requested new output from src, and your process() function will be
// called again once src has output and dst is accepts input (the latest).
bool mp_pin_can_transfer_data(struct mp_pin *dst, struct mp_pin *src);
// Trivial helper to copy data between two manual pins. This uses filter data
// flow - so if data can't be copied, it requests the pins to make it possible
// on the next filter run. This implies you call this either from a filter
// process() function, or call it manually when needed. Also see
// mp_pin_can_transfer_data(). Returns whether a transfer happened.
bool mp_pin_transfer_data(struct mp_pin *dst, struct mp_pin *src);
// Connect src and dst, for automatic data flow. Pin src will reflect the request
// state of pin dst, and accept and pass down frames to dst when appropriate.
video: rewrite filtering glue code Get rid of the old vf.c code. Replace it with a generic filtering framework, which can potentially handle more than just --vf. At least reimplementing --af with this code is planned. This changes some --vf semantics (including runtime behavior and the "vf" command). The most important ones are listed in interface-changes. vf_convert.c is renamed to f_swscale.c. It is now an internal filter that can not be inserted by the user manually. f_lavfi.c is a refactor of player/lavfi.c. The latter will be removed once --lavfi-complex is reimplemented on top of f_lavfi.c. (which is conceptually easy, but a big mess due to the data flow changes). The existing filters are all changed heavily. The data flow of the new filter framework is different. Especially EOF handling changes - EOF is now a "frame" rather than a state, and must be passed through exactly once. Another major thing is that all filters must support dynamic format changes. The filter reconfig() function goes away. (This sounds complex, but since all filters need to handle EOF draining anyway, they can use the same code, and it removes the mess with reconfig() having to predict the output format, which completely breaks with libavfilter anyway.) In addition, there is no automatic format negotiation or conversion. libavfilter's primitive and insufficient API simply doesn't allow us to do this in a reasonable way. Instead, filters can use f_autoconvert as sub-filter, and tell it which formats they support. This filter will in turn add actual conversion filters, such as f_swscale, to perform necessary format changes. vf_vapoursynth.c uses the same basic principle of operation as before, but with worryingly different details in data flow. Still appears to work. The hardware deint filters (vf_vavpp.c, vf_d3d11vpp.c, vf_vdpaupp.c) are heavily changed. Fortunately, they all used refqueue.c, which is for sharing the data flow logic (especially for managing future/past surfaces and such). It turns out it can be used to factor out most of the data flow. Some of these filters accepted software input. Instead of having ad-hoc upload code in each filter, surface upload is now delegated to f_autoconvert, which can use f_hwupload to perform this. Exporting VO capabilities is still a big mess (mp_stream_info stuff). The D3D11 code drops the redundant image formats, and all code uses the hw_subfmt (sw_format in FFmpeg) instead. Although that too seems to be a big mess for now. f_async_queue is unused.
2018-01-16 10:53:44 +00:00
// src must be MP_PIN_OUT, dst must be MP_PIN_IN.
// Previous connections are always removed. If the pins were already connected,
// no action is taken.
// Creating circular connections will just cause infinite recursion or such.
// Both API user and filter implementations can use this, but always only on
// the pins they're allowed to access.
void mp_pin_connect(struct mp_pin *dst, struct mp_pin *src);
// Enable manual filter access. This means you want to directly use the
// mp_pin_in*() and mp_pin_out_*() functions for data flow.
// Always severs previous connections.
void mp_pin_set_manual_connection(struct mp_pin *p, bool connected);
// Enable manual filter access, like mp_pin_set_manual_connection(). In
// addition, this specifies which filter's process function should be invoked
// on pin state changes. Using mp_pin_set_manual_connection() will default to
// the parent filter for this.
// Passing f=NULL disconnects.
void mp_pin_set_manual_connection_for(struct mp_pin *p, struct mp_filter *f);
// Return the manual connection for this pin, or NULL if none.
struct mp_filter *mp_pin_get_manual_connection(struct mp_pin *p);
// Disconnect the pin, possibly breaking connections.
video: rewrite filtering glue code Get rid of the old vf.c code. Replace it with a generic filtering framework, which can potentially handle more than just --vf. At least reimplementing --af with this code is planned. This changes some --vf semantics (including runtime behavior and the "vf" command). The most important ones are listed in interface-changes. vf_convert.c is renamed to f_swscale.c. It is now an internal filter that can not be inserted by the user manually. f_lavfi.c is a refactor of player/lavfi.c. The latter will be removed once --lavfi-complex is reimplemented on top of f_lavfi.c. (which is conceptually easy, but a big mess due to the data flow changes). The existing filters are all changed heavily. The data flow of the new filter framework is different. Especially EOF handling changes - EOF is now a "frame" rather than a state, and must be passed through exactly once. Another major thing is that all filters must support dynamic format changes. The filter reconfig() function goes away. (This sounds complex, but since all filters need to handle EOF draining anyway, they can use the same code, and it removes the mess with reconfig() having to predict the output format, which completely breaks with libavfilter anyway.) In addition, there is no automatic format negotiation or conversion. libavfilter's primitive and insufficient API simply doesn't allow us to do this in a reasonable way. Instead, filters can use f_autoconvert as sub-filter, and tell it which formats they support. This filter will in turn add actual conversion filters, such as f_swscale, to perform necessary format changes. vf_vapoursynth.c uses the same basic principle of operation as before, but with worryingly different details in data flow. Still appears to work. The hardware deint filters (vf_vavpp.c, vf_d3d11vpp.c, vf_vdpaupp.c) are heavily changed. Fortunately, they all used refqueue.c, which is for sharing the data flow logic (especially for managing future/past surfaces and such). It turns out it can be used to factor out most of the data flow. Some of these filters accepted software input. Instead of having ad-hoc upload code in each filter, surface upload is now delegated to f_autoconvert, which can use f_hwupload to perform this. Exporting VO capabilities is still a big mess (mp_stream_info stuff). The D3D11 code drops the redundant image formats, and all code uses the hw_subfmt (sw_format in FFmpeg) instead. Although that too seems to be a big mess for now. f_async_queue is unused.
2018-01-16 10:53:44 +00:00
void mp_pin_disconnect(struct mp_pin *p);
// Return whether a connection was set on this pin. Note that this is not
// transitive (if the pin is connected to an pin with no further connections,
// there is no active connection, but this still returns true).
bool mp_pin_is_connected(struct mp_pin *p);
// Return a symbolic name of the pin. Usually it will be something redundant
// (like "in" or "out"), or something the user set.
// The returned pointer is valid as long as the mp_pin is allocated.
const char *mp_pin_get_name(struct mp_pin *p);
/**
* A filter converts input frames to output frames (mp_frame, usually audio or
* video data). It can support multiple inputs and outputs. Data always flows
* through mp_pin instances.
*
* --- General rules for data flow:
*
* All data goes through mp_pin (present in the mp_filter inputs/outputs list).
* Actual work is done in the filter's process() function. This function
* queries whether input mp_pins have data and output mp_pins require data. If
* both is the case, a frame is read, filtered, and written to the output.
* Depending on the filter type, the filter might internally buffer data (e.g.
* things that require readahead). But in general, a filter should not request
* input before output is needed.
*
* The general goal is to reduce the amount of data buffered. This is why
* mp_pins buffer at most 1 frame, and the API is designed such that queued
* data in pins will be immediately passed to the next filter. If buffering is
video: rewrite filtering glue code Get rid of the old vf.c code. Replace it with a generic filtering framework, which can potentially handle more than just --vf. At least reimplementing --af with this code is planned. This changes some --vf semantics (including runtime behavior and the "vf" command). The most important ones are listed in interface-changes. vf_convert.c is renamed to f_swscale.c. It is now an internal filter that can not be inserted by the user manually. f_lavfi.c is a refactor of player/lavfi.c. The latter will be removed once --lavfi-complex is reimplemented on top of f_lavfi.c. (which is conceptually easy, but a big mess due to the data flow changes). The existing filters are all changed heavily. The data flow of the new filter framework is different. Especially EOF handling changes - EOF is now a "frame" rather than a state, and must be passed through exactly once. Another major thing is that all filters must support dynamic format changes. The filter reconfig() function goes away. (This sounds complex, but since all filters need to handle EOF draining anyway, they can use the same code, and it removes the mess with reconfig() having to predict the output format, which completely breaks with libavfilter anyway.) In addition, there is no automatic format negotiation or conversion. libavfilter's primitive and insufficient API simply doesn't allow us to do this in a reasonable way. Instead, filters can use f_autoconvert as sub-filter, and tell it which formats they support. This filter will in turn add actual conversion filters, such as f_swscale, to perform necessary format changes. vf_vapoursynth.c uses the same basic principle of operation as before, but with worryingly different details in data flow. Still appears to work. The hardware deint filters (vf_vavpp.c, vf_d3d11vpp.c, vf_vdpaupp.c) are heavily changed. Fortunately, they all used refqueue.c, which is for sharing the data flow logic (especially for managing future/past surfaces and such). It turns out it can be used to factor out most of the data flow. Some of these filters accepted software input. Instead of having ad-hoc upload code in each filter, surface upload is now delegated to f_autoconvert, which can use f_hwupload to perform this. Exporting VO capabilities is still a big mess (mp_stream_info stuff). The D3D11 code drops the redundant image formats, and all code uses the hw_subfmt (sw_format in FFmpeg) instead. Although that too seems to be a big mess for now. f_async_queue is unused.
2018-01-16 10:53:44 +00:00
* actually desired, explicit filters for buffering have to be introduced into
* the filter chain.
*
* Typically a filter will do something like this:
*
* process(struct mp_filter *f) {
* if (!mp_pin_in_needs_data(f->ppins[1]))
* return; // reader needs no output yet, so stop filtering
* if (!have_enough_data_for_output) {
* // Could check mp_pin_out_request_data(), but often just trying to
* // read is enough, as a failed read will request more data.
* struct mp_frame fr = mp_pin_out_read_data(f->ppins[0]);
* if (!fr.type)
* return; // no frame was returned - data was requested, and will
* // be queued when available, and invoke process() again
* ... do something with fr here ...
* }
* ... produce output frame (i.e. actual filtering) ...
* mp_pin_in_write(f->ppins[1], output_frame);
* }
*
* Simpler filters can use utility functions like mp_pin_can_transfer_data(),
* which reduce the boilerplate. Such filters also may not need to buffer data
* as internal state.
*
* --- Driving filters:
*
* The filter root (created by mp_filter_create_root()) will internally create
* a graph runner, that can be entered with mp_filter_run(). This will check if
* any filter/pin has unhandled requests, and call filter process() functions
* accordingly. Outside of the filter, this can be triggered implicitly via the
* mp_pin_* functions.
*
video: rewrite filtering glue code Get rid of the old vf.c code. Replace it with a generic filtering framework, which can potentially handle more than just --vf. At least reimplementing --af with this code is planned. This changes some --vf semantics (including runtime behavior and the "vf" command). The most important ones are listed in interface-changes. vf_convert.c is renamed to f_swscale.c. It is now an internal filter that can not be inserted by the user manually. f_lavfi.c is a refactor of player/lavfi.c. The latter will be removed once --lavfi-complex is reimplemented on top of f_lavfi.c. (which is conceptually easy, but a big mess due to the data flow changes). The existing filters are all changed heavily. The data flow of the new filter framework is different. Especially EOF handling changes - EOF is now a "frame" rather than a state, and must be passed through exactly once. Another major thing is that all filters must support dynamic format changes. The filter reconfig() function goes away. (This sounds complex, but since all filters need to handle EOF draining anyway, they can use the same code, and it removes the mess with reconfig() having to predict the output format, which completely breaks with libavfilter anyway.) In addition, there is no automatic format negotiation or conversion. libavfilter's primitive and insufficient API simply doesn't allow us to do this in a reasonable way. Instead, filters can use f_autoconvert as sub-filter, and tell it which formats they support. This filter will in turn add actual conversion filters, such as f_swscale, to perform necessary format changes. vf_vapoursynth.c uses the same basic principle of operation as before, but with worryingly different details in data flow. Still appears to work. The hardware deint filters (vf_vavpp.c, vf_d3d11vpp.c, vf_vdpaupp.c) are heavily changed. Fortunately, they all used refqueue.c, which is for sharing the data flow logic (especially for managing future/past surfaces and such). It turns out it can be used to factor out most of the data flow. Some of these filters accepted software input. Instead of having ad-hoc upload code in each filter, surface upload is now delegated to f_autoconvert, which can use f_hwupload to perform this. Exporting VO capabilities is still a big mess (mp_stream_info stuff). The D3D11 code drops the redundant image formats, and all code uses the hw_subfmt (sw_format in FFmpeg) instead. Although that too seems to be a big mess for now. f_async_queue is unused.
2018-01-16 10:53:44 +00:00
* Multiple filters are driven by letting mp_pin flag filters which need
* process() to be called. The process starts by requesting output from the
* last filter. The requests will "bubble up" by iteratively calling process()
* on each filter, which will request further input, until input on the first
* filter's input pin is requested. The API user feeds it a frame, which will
* call the first filter's process() function, which will filter and output
* the frame, and the frame is iteratively filtered until it reaches the output.
*
* (The mp_pin_* calls can recursively start filtering, but this is only the
* case if you access a separate graph with a different filter root. Most
* importantly, calling them from outside the filter's process() function (e.g.
* an outside filter user) will enter filtering. Within the filter, mp_pin_*
* will usually only set or query flags.)
video: rewrite filtering glue code Get rid of the old vf.c code. Replace it with a generic filtering framework, which can potentially handle more than just --vf. At least reimplementing --af with this code is planned. This changes some --vf semantics (including runtime behavior and the "vf" command). The most important ones are listed in interface-changes. vf_convert.c is renamed to f_swscale.c. It is now an internal filter that can not be inserted by the user manually. f_lavfi.c is a refactor of player/lavfi.c. The latter will be removed once --lavfi-complex is reimplemented on top of f_lavfi.c. (which is conceptually easy, but a big mess due to the data flow changes). The existing filters are all changed heavily. The data flow of the new filter framework is different. Especially EOF handling changes - EOF is now a "frame" rather than a state, and must be passed through exactly once. Another major thing is that all filters must support dynamic format changes. The filter reconfig() function goes away. (This sounds complex, but since all filters need to handle EOF draining anyway, they can use the same code, and it removes the mess with reconfig() having to predict the output format, which completely breaks with libavfilter anyway.) In addition, there is no automatic format negotiation or conversion. libavfilter's primitive and insufficient API simply doesn't allow us to do this in a reasonable way. Instead, filters can use f_autoconvert as sub-filter, and tell it which formats they support. This filter will in turn add actual conversion filters, such as f_swscale, to perform necessary format changes. vf_vapoursynth.c uses the same basic principle of operation as before, but with worryingly different details in data flow. Still appears to work. The hardware deint filters (vf_vavpp.c, vf_d3d11vpp.c, vf_vdpaupp.c) are heavily changed. Fortunately, they all used refqueue.c, which is for sharing the data flow logic (especially for managing future/past surfaces and such). It turns out it can be used to factor out most of the data flow. Some of these filters accepted software input. Instead of having ad-hoc upload code in each filter, surface upload is now delegated to f_autoconvert, which can use f_hwupload to perform this. Exporting VO capabilities is still a big mess (mp_stream_info stuff). The D3D11 code drops the redundant image formats, and all code uses the hw_subfmt (sw_format in FFmpeg) instead. Although that too seems to be a big mess for now. f_async_queue is unused.
2018-01-16 10:53:44 +00:00
*
* --- General rules for thread safety:
*
* Filters are by default not thread safe. However, some filters can be
* partially thread safe and allow certain functions to be accessed from
* foreign threads. The common filter code itself is not thread safe, except
* for some utility functions explicitly marked as such, and which are meant
* to make implementing threaded filters easier.
*
* --- Rules for manual connections:
*
* A pin can be marked for manual connection via mp_pin_set_manual_connection().
* It's also the default. These have two uses:
*
* 1. filter internal (the filter actually does something with a frame)
* 2. filter user manually feeding/retrieving frames
*
* Basically, a manual connection means someone uses the mp_pin_in_*() or
* mp_pin_out_*() functions on a pin. The alternative is an automatic connection
* made via mp_pin_connect(). Manual connections need special considerations
* for wakeups:
*
* Internal manual pins (within a filter) will invoke the filter's process()
* function, and the filter polls the state of all pins to see if anything
* needs to be filtered or requested.
*
* External manual pins (filter user) require the user to poll all manual pins
* that are part of the graph. In addition, the filter's wakeup callback must be
* set, and trigger repolling all pins. This is needed in case any filters do
* async filtering internally.
*
* --- Rules for filters with multiple inputs or outputs:
*
* The generic filter code does not do any kind of scheduling. It's the filter's
* responsibility to request frames from input when needed, and to avoid
* internal excessive buffering if outputs aren't read.
*
* --- Rules for async filters:
*
* Async filters will have a synchronous interface with asynchronous waiting.
* They change mp_pin data flow to being poll based, with a wakeup mechanism to
* avoid active waiting. Once polling results in no change, the API user can go
* to sleep, and wait until the wakeup callback set via mp_filter_create_root()
* is invoked. Then it can poll the filters again. Internally, filters use
* mp_filter_wakeup() to get their process() function invoked on the user
* thread, and update the mp_pin states.
*
* For running parts of a filter graph on a different thread, f_async_queue.h
* can be used.
*
* --- Format conversions and mid-stream format changes:
*
* Generally, all filters must support all formats, as well as mid-stream
* format changes. If they don't, they will have to error out. There are some
* helpers for dealing with these two things.
*
* mp_pin_out_unread() can temporarily put back an input frame. If the input
* format changed, and you have to drain buffered data, you can put back the
* frame every time you output a buffered frame. Once all buffered data is
* drained this way, you can actually change the internal filter state to the
* new format, and actually consume the input frame.
*
* There is an f_autoconvert filter, which lets you transparently convert to
* a set of target formats (and which passes through the data if no conversion
* is needed).
*
* --- Rules for format negotiation:
*
* Since libavfilter does not provide _any_ kind of format negotiation to the
* user, and most filters use the libavfilter wrapper anyway, this is pretty
* broken and rudimentary. (The only thing libavfilter provides is that you
* can try to create a filter with a specific input format. Then you get
* either failure, or an output format. It involves actually initializing all
* filters, so a try run is not cheap or even side effect free.)
*/
struct mp_filter {
// Private state for the filter implementation. API users must not access
// this.
void *priv;
struct mpv_global *global;
struct mp_log *log;
// Array of public pins. API users can read this, but are not allowed to
// modify the array. Filter implementations use mp_filter_add_pin() to add
// pins to the array. The array is in order of the add calls.
// Most filters will use pins[0] for input (MP_PIN_IN), and pins[1] for
// output (MP_PIN_OUT). This is the default convention for filters. Some
// filters may have more complex usage, and assign pin entries with
// different meanings.
// The filter implementation must not use this. It must access ppins[]
// instead.
struct mp_pin **pins;
int num_pins;
// Internal pins, for access by the filter implementation. The meaning of
// in/out is swapped from the public interface: inputs use MP_PIN_OUT,
// because the filter reads from the inputs, and outputs use MP_PIN_IN,
// because the filter writes to them. ppins[n] always corresponds to pin[n],
// with swapped direction, and implicit data flow between the two.
// Outside API users must not access this.
struct mp_pin **ppins;
// Dumb garbage.
struct mp_stream_info *stream_info;
// Private state for the generic filter code.
struct mp_filter_internal *in;
};
// Return a symbolic name, which is set at init time. NULL if no name.
// Valid until filter is destroyed or next mp_filter_set_name() call.
const char *mp_filter_get_name(struct mp_filter *f);
// Change mp_filter_get_name() return value.
void mp_filter_set_name(struct mp_filter *f, const char *name);
// Get a pin from f->pins[] for which mp_pin_get_name() returns the same name.
// If name is NULL, always return NULL.
struct mp_pin *mp_filter_get_named_pin(struct mp_filter *f, const char *name);
// Return true if the filter has failed in some fatal way that does not allow
// it to continue. This resets the error state (but does not reset the child
// failed status on any parent filter).
bool mp_filter_has_failed(struct mp_filter *filter);
// Invoke mp_filter_info.reset on this filter and all children (but not
// other filters connected via pins).
void mp_filter_reset(struct mp_filter *filter);
enum mp_filter_command_type {
MP_FILTER_COMMAND_TEXT = 1,
MP_FILTER_COMMAND_GET_META,
MP_FILTER_COMMAND_SET_SPEED,
MP_FILTER_COMMAND_SET_SPEED_RESAMPLE,
video: rewrite filtering glue code Get rid of the old vf.c code. Replace it with a generic filtering framework, which can potentially handle more than just --vf. At least reimplementing --af with this code is planned. This changes some --vf semantics (including runtime behavior and the "vf" command). The most important ones are listed in interface-changes. vf_convert.c is renamed to f_swscale.c. It is now an internal filter that can not be inserted by the user manually. f_lavfi.c is a refactor of player/lavfi.c. The latter will be removed once --lavfi-complex is reimplemented on top of f_lavfi.c. (which is conceptually easy, but a big mess due to the data flow changes). The existing filters are all changed heavily. The data flow of the new filter framework is different. Especially EOF handling changes - EOF is now a "frame" rather than a state, and must be passed through exactly once. Another major thing is that all filters must support dynamic format changes. The filter reconfig() function goes away. (This sounds complex, but since all filters need to handle EOF draining anyway, they can use the same code, and it removes the mess with reconfig() having to predict the output format, which completely breaks with libavfilter anyway.) In addition, there is no automatic format negotiation or conversion. libavfilter's primitive and insufficient API simply doesn't allow us to do this in a reasonable way. Instead, filters can use f_autoconvert as sub-filter, and tell it which formats they support. This filter will in turn add actual conversion filters, such as f_swscale, to perform necessary format changes. vf_vapoursynth.c uses the same basic principle of operation as before, but with worryingly different details in data flow. Still appears to work. The hardware deint filters (vf_vavpp.c, vf_d3d11vpp.c, vf_vdpaupp.c) are heavily changed. Fortunately, they all used refqueue.c, which is for sharing the data flow logic (especially for managing future/past surfaces and such). It turns out it can be used to factor out most of the data flow. Some of these filters accepted software input. Instead of having ad-hoc upload code in each filter, surface upload is now delegated to f_autoconvert, which can use f_hwupload to perform this. Exporting VO capabilities is still a big mess (mp_stream_info stuff). The D3D11 code drops the redundant image formats, and all code uses the hw_subfmt (sw_format in FFmpeg) instead. Although that too seems to be a big mess for now. f_async_queue is unused.
2018-01-16 10:53:44 +00:00
};
struct mp_filter_command {
enum mp_filter_command_type type;
// For MP_FILTER_COMMAND_TEXT
const char *cmd;
const char *arg;
// For MP_FILTER_COMMAND_GET_META
void *res; // must point to struct mp_tags*, will be set to new instance
// For MP_FILTER_COMMAND_SET_SPEED and MP_FILTER_COMMAND_SET_SPEED_RESAMPLE
double speed;
video: rewrite filtering glue code Get rid of the old vf.c code. Replace it with a generic filtering framework, which can potentially handle more than just --vf. At least reimplementing --af with this code is planned. This changes some --vf semantics (including runtime behavior and the "vf" command). The most important ones are listed in interface-changes. vf_convert.c is renamed to f_swscale.c. It is now an internal filter that can not be inserted by the user manually. f_lavfi.c is a refactor of player/lavfi.c. The latter will be removed once --lavfi-complex is reimplemented on top of f_lavfi.c. (which is conceptually easy, but a big mess due to the data flow changes). The existing filters are all changed heavily. The data flow of the new filter framework is different. Especially EOF handling changes - EOF is now a "frame" rather than a state, and must be passed through exactly once. Another major thing is that all filters must support dynamic format changes. The filter reconfig() function goes away. (This sounds complex, but since all filters need to handle EOF draining anyway, they can use the same code, and it removes the mess with reconfig() having to predict the output format, which completely breaks with libavfilter anyway.) In addition, there is no automatic format negotiation or conversion. libavfilter's primitive and insufficient API simply doesn't allow us to do this in a reasonable way. Instead, filters can use f_autoconvert as sub-filter, and tell it which formats they support. This filter will in turn add actual conversion filters, such as f_swscale, to perform necessary format changes. vf_vapoursynth.c uses the same basic principle of operation as before, but with worryingly different details in data flow. Still appears to work. The hardware deint filters (vf_vavpp.c, vf_d3d11vpp.c, vf_vdpaupp.c) are heavily changed. Fortunately, they all used refqueue.c, which is for sharing the data flow logic (especially for managing future/past surfaces and such). It turns out it can be used to factor out most of the data flow. Some of these filters accepted software input. Instead of having ad-hoc upload code in each filter, surface upload is now delegated to f_autoconvert, which can use f_hwupload to perform this. Exporting VO capabilities is still a big mess (mp_stream_info stuff). The D3D11 code drops the redundant image formats, and all code uses the hw_subfmt (sw_format in FFmpeg) instead. Although that too seems to be a big mess for now. f_async_queue is unused.
2018-01-16 10:53:44 +00:00
};
// Run a command on the filter. Returns success. For libavfilter.
bool mp_filter_command(struct mp_filter *f, struct mp_filter_command *cmd);
// Specific information about a sub-tree in a filter graph. Currently, this is
// mostly used to give filters access to VO mechanisms and capabilities.
struct mp_stream_info {
void *priv; // for use by whoever implements the callbacks
double (*get_display_fps)(struct mp_stream_info *i);
double (*get_container_fps)(struct mp_stream_info *i);
struct mp_hwdec_devices *hwdec_devs;
struct osd_state *osd;
bool rotate90;
struct vo *dr_vo; // for calling vo_get_image()
video: rewrite filtering glue code Get rid of the old vf.c code. Replace it with a generic filtering framework, which can potentially handle more than just --vf. At least reimplementing --af with this code is planned. This changes some --vf semantics (including runtime behavior and the "vf" command). The most important ones are listed in interface-changes. vf_convert.c is renamed to f_swscale.c. It is now an internal filter that can not be inserted by the user manually. f_lavfi.c is a refactor of player/lavfi.c. The latter will be removed once --lavfi-complex is reimplemented on top of f_lavfi.c. (which is conceptually easy, but a big mess due to the data flow changes). The existing filters are all changed heavily. The data flow of the new filter framework is different. Especially EOF handling changes - EOF is now a "frame" rather than a state, and must be passed through exactly once. Another major thing is that all filters must support dynamic format changes. The filter reconfig() function goes away. (This sounds complex, but since all filters need to handle EOF draining anyway, they can use the same code, and it removes the mess with reconfig() having to predict the output format, which completely breaks with libavfilter anyway.) In addition, there is no automatic format negotiation or conversion. libavfilter's primitive and insufficient API simply doesn't allow us to do this in a reasonable way. Instead, filters can use f_autoconvert as sub-filter, and tell it which formats they support. This filter will in turn add actual conversion filters, such as f_swscale, to perform necessary format changes. vf_vapoursynth.c uses the same basic principle of operation as before, but with worryingly different details in data flow. Still appears to work. The hardware deint filters (vf_vavpp.c, vf_d3d11vpp.c, vf_vdpaupp.c) are heavily changed. Fortunately, they all used refqueue.c, which is for sharing the data flow logic (especially for managing future/past surfaces and such). It turns out it can be used to factor out most of the data flow. Some of these filters accepted software input. Instead of having ad-hoc upload code in each filter, surface upload is now delegated to f_autoconvert, which can use f_hwupload to perform this. Exporting VO capabilities is still a big mess (mp_stream_info stuff). The D3D11 code drops the redundant image formats, and all code uses the hw_subfmt (sw_format in FFmpeg) instead. Although that too seems to be a big mess for now. f_async_queue is unused.
2018-01-16 10:53:44 +00:00
};
// Search for a parent filter (including f) that has this set, and return it.
struct mp_stream_info *mp_filter_find_stream_info(struct mp_filter *f);
struct AVBufferRef;
struct AVBufferRef *mp_filter_load_hwdec_device(struct mp_filter *f, int avtype);
// Perform filtering. This runs until the filter graph is blocked (due to
// missing external input or unread output). It returns whether any outside
// pins have changed state.
// Does not perform recursive filtering to connected filters with different
// root filter, though it notifies them.
bool mp_filter_run(struct mp_filter *f);
// Create a root dummy filter with no inputs or outputs. This fulfills the
// following functions:
// - passing it as parent filter to top-level filters
// - driving the filter loop between the shared filters
// - setting the wakeup callback for async filtering
// - implicitly passing down global data like mpv_global and keeping filter
// constructor functions simple
// Note that you can still connect pins of filters with different parents or
// root filters, but then you may have to manually invoke mp_filter_run() on
// the root filters of the connected filters to drive data flow.
struct mp_filter *mp_filter_create_root(struct mpv_global *global);
// Asynchronous filters may need to wakeup the user thread if the status of any
// mp_pin has changed. If this is called, the callback provider should get the
// user's thread to call mp_filter_run() again.
// The wakeup callback must not recursively call into any filter APIs, or do
// blocking waits on the filter API (deadlocks will happen).
void mp_filter_root_set_wakeup_cb(struct mp_filter *root,
void (*wakeup_cb)(void *ctx), void *ctx);
// Debugging internal stuff.
void mp_filter_dump_states(struct mp_filter *f);