mpv/input/input.h

216 lines
8.4 KiB
C
Raw Normal View History

/*
* This file is part of MPlayer.
*
* MPlayer is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* MPlayer is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with MPlayer; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*/
#ifndef MPLAYER_INPUT_H
#define MPLAYER_INPUT_H
#include <stdbool.h>
#include "bstr/bstr.h"
#include "cmd_list.h"
#include "cmd_parse.h"
// Error codes for the drivers
// An error occurred but we can continue
#define MP_INPUT_ERROR -1
// A fatal error occurred, this driver should be removed
#define MP_INPUT_DEAD -2
// No input was available
#define MP_INPUT_NOTHING -3
//! Input will be available if you try again
#define MP_INPUT_RETRY -4
// Key FIFO was full - release events may be lost, zero button-down status
#define MP_INPUT_RELEASE_ALL -5
enum mp_cmd_flags {
MP_ON_OSD_NO = 0, // prefer not using OSD
MP_ON_OSD_AUTO = 1, // use default behavior of the specific command
MP_ON_OSD_BAR = 2, // force a bar, if applicable
MP_ON_OSD_MSG = 4, // force a message, if applicable
MP_EXPAND_PROPERTIES = 8, // expand strings as properties
MP_PAUSING = 16, // pause after running command
MP_PAUSING_TOGGLE = 32, // toggle pause after running command
MP_ON_OSD_FLAGS = MP_ON_OSD_NO | MP_ON_OSD_AUTO |
MP_ON_OSD_BAR | MP_ON_OSD_MSG,
MP_PAUSING_FLAGS = MP_PAUSING | MP_PAUSING_TOGGLE,
};
enum mp_input_section_flags {
input: handle mouse movement differently Before this commit, mouse movement events emitted a special command ("set_mouse_pos"), which was specially handled in command.c. This was once special-cased to the dvdnav and menu code, and did nothing after libmenu and dvdnav were removed. Change it so that mouse movement triggers a pseudo-key ("MOUSE_MOVE"), which then can be bound to an arbitrary command. The mouse position is now managed in input.c. A command which actually needs the mouse position can use either mp_input_get_mouse_pos() or mp_get_osd_mouse_pos() to query it. The former returns raw window-space coordinates, while the latter returns coordinates transformed to OSD- space. (Both are the same for most VOs, except vo_xv and vo_x11, which can't render OSD in window-space. These require extra code for mapping mouse position.) As of this commit, there is still nothing that uses mouse movement, so MOUSE_MOVE is mapped to "ignore" to silence warnings when moving the mouse (much like MOUSE_BTN0). Extend the concept of input sections. Allow multiple sections to be active at once, and organize them as stack. Bindings from the top of the stack are preferred to lower ones. Each section has a mouse input section associated, inside which mouse events are associated with the bindings. If the mouse pointer is outside of a section's mouse area, mouse events will be dispatched to an input section lower on the stack of active sections. This is intended for scripting, which is to be added later. Two scripts could occupy different areas of the screen without conflicting with each other. (If it turns out that this mechanism is useless, we'll just remove it again.)
2013-04-26 00:13:30 +00:00
// If a key binding is not defined in the current section, do not search the
// other sections for it (like the default section). Instead, an unbound
// key warning will be printed.
MP_INPUT_EXCLUSIVE = 1,
// Let mp_input_test_dragging() return true, even if inside the mouse area.
MP_INPUT_ALLOW_VO_DRAGGING = 2,
// Don't force mouse pointer visible, even if inside the mouse area.
MP_INPUT_ALLOW_HIDE_CURSOR = 4,
};
struct input_ctx;
struct mp_log;
struct mp_cmd_arg {
const struct m_option *type;
union {
int i;
float f;
double d;
char *s;
void *p;
} v;
};
typedef struct mp_cmd {
int id;
char *name;
struct mp_cmd_arg args[MP_CMD_MAX_ARGS];
int nargs;
int flags; // mp_cmd_flags bitfield
bstr original;
char *input_section;
input: handle mouse movement differently Before this commit, mouse movement events emitted a special command ("set_mouse_pos"), which was specially handled in command.c. This was once special-cased to the dvdnav and menu code, and did nothing after libmenu and dvdnav were removed. Change it so that mouse movement triggers a pseudo-key ("MOUSE_MOVE"), which then can be bound to an arbitrary command. The mouse position is now managed in input.c. A command which actually needs the mouse position can use either mp_input_get_mouse_pos() or mp_get_osd_mouse_pos() to query it. The former returns raw window-space coordinates, while the latter returns coordinates transformed to OSD- space. (Both are the same for most VOs, except vo_xv and vo_x11, which can't render OSD in window-space. These require extra code for mapping mouse position.) As of this commit, there is still nothing that uses mouse movement, so MOUSE_MOVE is mapped to "ignore" to silence warnings when moving the mouse (much like MOUSE_BTN0). Extend the concept of input sections. Allow multiple sections to be active at once, and organize them as stack. Bindings from the top of the stack are preferred to lower ones. Each section has a mouse input section associated, inside which mouse events are associated with the bindings. If the mouse pointer is outside of a section's mouse area, mouse events will be dispatched to an input section lower on the stack of active sections. This is intended for scripting, which is to be added later. Two scripts could occupy different areas of the screen without conflicting with each other. (If it turns out that this mechanism is useless, we'll just remove it again.)
2013-04-26 00:13:30 +00:00
bool key_up_follows;
bool repeated;
input: handle mouse movement differently Before this commit, mouse movement events emitted a special command ("set_mouse_pos"), which was specially handled in command.c. This was once special-cased to the dvdnav and menu code, and did nothing after libmenu and dvdnav were removed. Change it so that mouse movement triggers a pseudo-key ("MOUSE_MOVE"), which then can be bound to an arbitrary command. The mouse position is now managed in input.c. A command which actually needs the mouse position can use either mp_input_get_mouse_pos() or mp_get_osd_mouse_pos() to query it. The former returns raw window-space coordinates, while the latter returns coordinates transformed to OSD- space. (Both are the same for most VOs, except vo_xv and vo_x11, which can't render OSD in window-space. These require extra code for mapping mouse position.) As of this commit, there is still nothing that uses mouse movement, so MOUSE_MOVE is mapped to "ignore" to silence warnings when moving the mouse (much like MOUSE_BTN0). Extend the concept of input sections. Allow multiple sections to be active at once, and organize them as stack. Bindings from the top of the stack are preferred to lower ones. Each section has a mouse input section associated, inside which mouse events are associated with the bindings. If the mouse pointer is outside of a section's mouse area, mouse events will be dispatched to an input section lower on the stack of active sections. This is intended for scripting, which is to be added later. Two scripts could occupy different areas of the screen without conflicting with each other. (If it turns out that this mechanism is useless, we'll just remove it again.)
2013-04-26 00:13:30 +00:00
bool mouse_move;
int mouse_x, mouse_y;
input: rework event reading and command queuing Rework much of the logic related to reading from event sources and queuing commands. The two biggest architecture changes are: - The code buffering keycodes in mp_fifo.c is gone. Instead key input is now immediately fed to input.c and interpreted as commands, and then the commands are buffered instead. - mp_input_get_cmd() now always tries to read every available event from every event source and convert them to (buffered) commands. Before it would only process new events until one new command became available. Some relevant behavior changes: - Before commands could be lost when stream code called mp_input_check_interrupt() which read commands (to see if they were of types that triggered aborts during slow IO tasks) and then threw them away. This was especially an issue if cache was enabled and slow to read. Fixed - now it's possible to check whether there are queued commands which will abort playback of the current file without throwing other commands away. - mp_input_check_interrupt() now prints a message if it returns true. This is especially useful because the failures caused by aborted stream reads can trigger error messages from other code that was doing the read; the new message makes it more obvious what the cause of the subsequent error messages is. - It's now possible to again avoid making stdin non-blocking (which caused some issues) without reintroducing extra latency. The change will be done in a subsequent commit. - Event sources that do not support select() should now have somewhat lower latency in certain situations as they will be checked both before and after select()/sleep in input reading; before the sleep always happened first even if such sources already had queued input. Before the key fifo was also handled in this manner (first key triggered select, but if multiple were read then rest could be delayed; however in most cases this didn't add latency in practice as after central code started doing command handling it queried for further commands with a max sleep time of 0). - Key fifo limiting is more accurate now: it now counts actual commands intead of keycodes, and all queued keys are read immediately from input devices so they can be counted correctly. - Since keypresses are now interpreted immediately, commands which change keybindings will no longer affect following keypresses that have already been read before the command is executed. This should not be an issue in practice with current keybinding behavior.
2011-07-17 01:47:50 +00:00
struct mp_cmd *queue_next;
double scale; // for scaling numeric arguments
const struct mp_cmd_def *def;
} mp_cmd_t;
/* Add a new command input source.
* "fd" is a file descriptor (use -1 if you don't use any fd)
* "select" tells whether to use select() on the fd to determine when to
* try reading.
* "read_cmd_func" is optional. It must return either text data or one of the
* MP_INPUT error codes above. For return values >= 0, it behaves like UNIX
* read() and returns the number of bytes copied to the dest buffer.
* "read_key_func" is optional. It returns either key codes (ASCII, keycodes.h),
* or MP_INPUT error codes.
* "close_func" will be called when closing. Can be NULL. Its return value
* is ignored (it's only there to allow using standard close() as the func).
* "ctx" is for free use, and is passed to the callbacks.
*/
int mp_input_add_fd(struct input_ctx *ictx, int fd, int select,
int read_cmd_func(void *ctx, int fd, char *dest, int size),
int read_key_func(void *ctx, int fd),
int close_func(void *ctx, int fd), void *ctx);
/* Can be passed as read_func for above function in order to read() from the FD.
*/
int input_default_read_cmd(void *ctx, int fd, char *buf, int l);
// Process keyboard input. code is a key code from keycodes.h, possibly
// with modifiers applied. MP_INPUT_RELEASE_ALL is also a valid value.
void mp_input_put_key(struct input_ctx *ictx, int code);
// Like mp_input_put_key(), but process all UTF-8 characters in the given
// string as key events.
void mp_input_put_key_utf8(struct input_ctx *ictx, int mods, struct bstr t);
input: rework event reading and command queuing Rework much of the logic related to reading from event sources and queuing commands. The two biggest architecture changes are: - The code buffering keycodes in mp_fifo.c is gone. Instead key input is now immediately fed to input.c and interpreted as commands, and then the commands are buffered instead. - mp_input_get_cmd() now always tries to read every available event from every event source and convert them to (buffered) commands. Before it would only process new events until one new command became available. Some relevant behavior changes: - Before commands could be lost when stream code called mp_input_check_interrupt() which read commands (to see if they were of types that triggered aborts during slow IO tasks) and then threw them away. This was especially an issue if cache was enabled and slow to read. Fixed - now it's possible to check whether there are queued commands which will abort playback of the current file without throwing other commands away. - mp_input_check_interrupt() now prints a message if it returns true. This is especially useful because the failures caused by aborted stream reads can trigger error messages from other code that was doing the read; the new message makes it more obvious what the cause of the subsequent error messages is. - It's now possible to again avoid making stdin non-blocking (which caused some issues) without reintroducing extra latency. The change will be done in a subsequent commit. - Event sources that do not support select() should now have somewhat lower latency in certain situations as they will be checked both before and after select()/sleep in input reading; before the sleep always happened first even if such sources already had queued input. Before the key fifo was also handled in this manner (first key triggered select, but if multiple were read then rest could be delayed; however in most cases this didn't add latency in practice as after central code started doing command handling it queried for further commands with a max sleep time of 0). - Key fifo limiting is more accurate now: it now counts actual commands intead of keycodes, and all queued keys are read immediately from input devices so they can be counted correctly. - Since keypresses are now interpreted immediately, commands which change keybindings will no longer affect following keypresses that have already been read before the command is executed. This should not be an issue in practice with current keybinding behavior.
2011-07-17 01:47:50 +00:00
// Process scrolling input. Support for precise scrolling. Scales the given
// scroll amount add multiplies it with the command (seeking, sub-delay, etc)
void mp_input_put_axis(struct input_ctx *ictx, int direction, double value);
input: handle mouse movement differently Before this commit, mouse movement events emitted a special command ("set_mouse_pos"), which was specially handled in command.c. This was once special-cased to the dvdnav and menu code, and did nothing after libmenu and dvdnav were removed. Change it so that mouse movement triggers a pseudo-key ("MOUSE_MOVE"), which then can be bound to an arbitrary command. The mouse position is now managed in input.c. A command which actually needs the mouse position can use either mp_input_get_mouse_pos() or mp_get_osd_mouse_pos() to query it. The former returns raw window-space coordinates, while the latter returns coordinates transformed to OSD- space. (Both are the same for most VOs, except vo_xv and vo_x11, which can't render OSD in window-space. These require extra code for mapping mouse position.) As of this commit, there is still nothing that uses mouse movement, so MOUSE_MOVE is mapped to "ignore" to silence warnings when moving the mouse (much like MOUSE_BTN0). Extend the concept of input sections. Allow multiple sections to be active at once, and organize them as stack. Bindings from the top of the stack are preferred to lower ones. Each section has a mouse input section associated, inside which mouse events are associated with the bindings. If the mouse pointer is outside of a section's mouse area, mouse events will be dispatched to an input section lower on the stack of active sections. This is intended for scripting, which is to be added later. Two scripts could occupy different areas of the screen without conflicting with each other. (If it turns out that this mechanism is useless, we'll just remove it again.)
2013-04-26 00:13:30 +00:00
// Update mouse position (in window coordinates).
void mp_input_set_mouse_pos(struct input_ctx *ictx, int x, int y);
void mp_input_get_mouse_pos(struct input_ctx *ictx, int *x, int *y);
// As for the cmd one you usually don't need this function.
void mp_input_rm_key_fd(struct input_ctx *ictx, int fd);
// Add a command to the command queue.
int mp_input_queue_cmd(struct input_ctx *ictx, struct mp_cmd *cmd);
/* Return next available command, or sleep up to "time" ms if none is
* available. If "peek_only" is true return a reference to the command
* but leave it queued.
*/
struct mp_cmd *mp_input_get_cmd(struct input_ctx *ictx, int time,
int peek_only);
// Parse text and return corresponding struct mp_cmd.
// The location parameter is for error messages.
struct mp_cmd *mp_input_parse_cmd(struct input_ctx *ictx, bstr str,
const char *location);
input: handle mouse movement differently Before this commit, mouse movement events emitted a special command ("set_mouse_pos"), which was specially handled in command.c. This was once special-cased to the dvdnav and menu code, and did nothing after libmenu and dvdnav were removed. Change it so that mouse movement triggers a pseudo-key ("MOUSE_MOVE"), which then can be bound to an arbitrary command. The mouse position is now managed in input.c. A command which actually needs the mouse position can use either mp_input_get_mouse_pos() or mp_get_osd_mouse_pos() to query it. The former returns raw window-space coordinates, while the latter returns coordinates transformed to OSD- space. (Both are the same for most VOs, except vo_xv and vo_x11, which can't render OSD in window-space. These require extra code for mapping mouse position.) As of this commit, there is still nothing that uses mouse movement, so MOUSE_MOVE is mapped to "ignore" to silence warnings when moving the mouse (much like MOUSE_BTN0). Extend the concept of input sections. Allow multiple sections to be active at once, and organize them as stack. Bindings from the top of the stack are preferred to lower ones. Each section has a mouse input section associated, inside which mouse events are associated with the bindings. If the mouse pointer is outside of a section's mouse area, mouse events will be dispatched to an input section lower on the stack of active sections. This is intended for scripting, which is to be added later. Two scripts could occupy different areas of the screen without conflicting with each other. (If it turns out that this mechanism is useless, we'll just remove it again.)
2013-04-26 00:13:30 +00:00
// Set current input section. The section is appended on top of the list of
// active sections, so its bindings are considered first. If the section was
// already active, it's moved to the top as well.
// name==NULL will behave as if name=="default"
// flags is a bitfield of enum mp_input_section_flags values
input: handle mouse movement differently Before this commit, mouse movement events emitted a special command ("set_mouse_pos"), which was specially handled in command.c. This was once special-cased to the dvdnav and menu code, and did nothing after libmenu and dvdnav were removed. Change it so that mouse movement triggers a pseudo-key ("MOUSE_MOVE"), which then can be bound to an arbitrary command. The mouse position is now managed in input.c. A command which actually needs the mouse position can use either mp_input_get_mouse_pos() or mp_get_osd_mouse_pos() to query it. The former returns raw window-space coordinates, while the latter returns coordinates transformed to OSD- space. (Both are the same for most VOs, except vo_xv and vo_x11, which can't render OSD in window-space. These require extra code for mapping mouse position.) As of this commit, there is still nothing that uses mouse movement, so MOUSE_MOVE is mapped to "ignore" to silence warnings when moving the mouse (much like MOUSE_BTN0). Extend the concept of input sections. Allow multiple sections to be active at once, and organize them as stack. Bindings from the top of the stack are preferred to lower ones. Each section has a mouse input section associated, inside which mouse events are associated with the bindings. If the mouse pointer is outside of a section's mouse area, mouse events will be dispatched to an input section lower on the stack of active sections. This is intended for scripting, which is to be added later. Two scripts could occupy different areas of the screen without conflicting with each other. (If it turns out that this mechanism is useless, we'll just remove it again.)
2013-04-26 00:13:30 +00:00
void mp_input_enable_section(struct input_ctx *ictx, char *name, int flags);
// Undo mp_input_enable_section().
// name==NULL will behave as if name=="default"
void mp_input_disable_section(struct input_ctx *ictx, char *name);
// Like mp_input_set_section(ictx, ..., 0) for all sections.
void mp_input_disable_all_sections(struct input_ctx *ictx);
// Set the contents of an input section.
// name: name of the section, for mp_input_set_section() etc.
// location: location string (like filename) for error reporting
// contents: list of keybindings, like input.conf
// a value of NULL deletes the section
// builtin: create as builtin section; this means if the user defines bindings
// using "{name}", they won't be ignored or overwritten - instead,
// they are preferred to the bindings defined with this call
// If the section already exists, its bindings are removed and replaced.
void mp_input_define_section(struct input_ctx *ictx, char *name, char *location,
char *contents, bool builtin);
// Define where on the screen the named input section should receive.
// Setting a rectangle of size 0 unsets the mouse area.
// A rectangle with negative size disables mouse input for this section.
void mp_input_set_section_mouse_area(struct input_ctx *ictx, char *name,
int x0, int y0, int x1, int y1);
// Used to detect mouse movement.
unsigned int mp_input_get_mouse_event_counter(struct input_ctx *ictx);
input: handle mouse movement differently Before this commit, mouse movement events emitted a special command ("set_mouse_pos"), which was specially handled in command.c. This was once special-cased to the dvdnav and menu code, and did nothing after libmenu and dvdnav were removed. Change it so that mouse movement triggers a pseudo-key ("MOUSE_MOVE"), which then can be bound to an arbitrary command. The mouse position is now managed in input.c. A command which actually needs the mouse position can use either mp_input_get_mouse_pos() or mp_get_osd_mouse_pos() to query it. The former returns raw window-space coordinates, while the latter returns coordinates transformed to OSD- space. (Both are the same for most VOs, except vo_xv and vo_x11, which can't render OSD in window-space. These require extra code for mapping mouse position.) As of this commit, there is still nothing that uses mouse movement, so MOUSE_MOVE is mapped to "ignore" to silence warnings when moving the mouse (much like MOUSE_BTN0). Extend the concept of input sections. Allow multiple sections to be active at once, and organize them as stack. Bindings from the top of the stack are preferred to lower ones. Each section has a mouse input section associated, inside which mouse events are associated with the bindings. If the mouse pointer is outside of a section's mouse area, mouse events will be dispatched to an input section lower on the stack of active sections. This is intended for scripting, which is to be added later. Two scripts could occupy different areas of the screen without conflicting with each other. (If it turns out that this mechanism is useless, we'll just remove it again.)
2013-04-26 00:13:30 +00:00
// Test whether there is any input section which wants to receive events.
// Note that the mouse event is always delivered, even if this returns false.
bool mp_input_test_mouse_active(struct input_ctx *ictx, int x, int y);
// Whether input.c wants mouse drag events at this mouse position. If this
// returns false, some VOs will initiate window dragging.
bool mp_input_test_dragging(struct input_ctx *ictx, int x, int y);
// Initialize the input system
2013-09-10 06:29:45 +00:00
struct mpv_global;
struct input_ctx *mp_input_init(struct mpv_global *global);
void mp_input_uninit(struct input_ctx *ictx);
// Wake up sleeping input loop from another thread.
void mp_input_wakeup(struct input_ctx *ictx);
// Interruptible usleep: (used by demux)
int mp_input_check_interrupt(struct input_ctx *ictx, int time);
// If this returns true, use Right Alt key as Alt Gr to produce special
// characters. If false, count Right Alt as the modifier Alt key.
bool mp_input_use_alt_gr(struct input_ctx *ictx);
extern int async_quit_request;
#endif /* MPLAYER_INPUT_H */