mpv/stream/stream_avdevice.c

35 lines
1010 B
C
Raw Normal View History

demux_lavf: add support for libavdevice libavdevice supports various "special" video and audio inputs, such as screen-capture or libavfilter filter graphs. libavdevice inputs are implemented as demuxers. They don't use the custom stream callbacks (in AVFormatContext.pb). Instead, input parameters are passed as filename. This means the mpv stream layer has to be disabled. Do this by adding the pseudo stream handler avdevice://, whose only purpose is passing the filename to demux_lavf, without actually doing anything. Change the logic how the filename is passed to libavformat. Remove handling of the filename from demux_open_lavf() and move it to lavf_check_file(). (This also fixes a possible bug when skipping the "lavf://" prefix.) libavdevice now can be invoked by specifying demuxer and args as in: mpv avdevice://demuxer:args The args are passed as filename to libavformat. When using libavdevice demuxers, their actual meaning is highly implementation specific. They don't refer to actual filenames. Note: libavdevice is disabled by default. There is one problem: libavdevice pulls in libavfilter, which in turn causes symbol clashes with mpv internals. The problem is that libavfilter includes a mplayer filter bridge, which is used to interface with a set of nearly unmodified mplayer filters copied into libavfilter. This filter bridge uses the same symbol names as mplayer/mpv's filter chain, which results in symbol clashes at link-time. This can be prevented by building ffmpeg with --disable-filter=mp, but unfortunately this is not the default. This means linking to libavdevice (which in turn forces linking with libavfilter by default) must be disabled. We try doing this by compiling a test file that defines one of the clashing symbols (vf_mpi_clear). To enable libavdevice input, ffmpeg should be built with the options: --disable-filter=mp and mpv with: --enable-libavdevice Originally, I tried to auto-detect it. But the resulting complications in configure did't seem worth the trouble.
2012-11-30 17:41:04 +00:00
/*
* This file is part of mpv.
*
Relicense some non-MPlayer source files to LGPL 2.1 or later This covers source files which were added in mplayer2 and mpv times only, and where all code is covered by LGPL relicensing agreements. There are probably more files to which this applies, but I'm being conservative here. A file named ao_sdl.c exists in MPlayer too, but the mpv one is a complete rewrite, and was added some time after the original ao_sdl.c was removed. The same applies to vo_sdl.c, for which the SDL2 API is radically different in addition (MPlayer supports SDL 1.2 only). common.c contains only code written by me. But common.h is a strange case: although it originally was named mp_common.h and exists in MPlayer too, by now it contains only definitions written by uau and me. The exceptions are the CONTROL_ defines - thus not changing the license of common.h yet. codec_tags.c contained once large tables generated from MPlayer's codecs.conf, but all of these tables were removed. From demux_playlist.c I'm removing a code fragment from someone who was not asked; this probably could be done later (see commit 15dccc37). misc.c is a bit complicated to reason about (it was split off mplayer.c and thus contains random functions out of this file), but actually all functions have been added post-MPlayer. Except get_relative_time(), which was written by uau, but looks similar to 3 different versions of something similar in each of the Unix/win32/OSX timer source files. I'm not sure what that means in regards to copyright, so I've just moved it into another still-GPL source file for now. screenshot.c once had some minor parts of MPlayer's vf_screenshot.c, but they're all gone.
2016-01-19 17:36:06 +00:00
* mpv is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
demux_lavf: add support for libavdevice libavdevice supports various "special" video and audio inputs, such as screen-capture or libavfilter filter graphs. libavdevice inputs are implemented as demuxers. They don't use the custom stream callbacks (in AVFormatContext.pb). Instead, input parameters are passed as filename. This means the mpv stream layer has to be disabled. Do this by adding the pseudo stream handler avdevice://, whose only purpose is passing the filename to demux_lavf, without actually doing anything. Change the logic how the filename is passed to libavformat. Remove handling of the filename from demux_open_lavf() and move it to lavf_check_file(). (This also fixes a possible bug when skipping the "lavf://" prefix.) libavdevice now can be invoked by specifying demuxer and args as in: mpv avdevice://demuxer:args The args are passed as filename to libavformat. When using libavdevice demuxers, their actual meaning is highly implementation specific. They don't refer to actual filenames. Note: libavdevice is disabled by default. There is one problem: libavdevice pulls in libavfilter, which in turn causes symbol clashes with mpv internals. The problem is that libavfilter includes a mplayer filter bridge, which is used to interface with a set of nearly unmodified mplayer filters copied into libavfilter. This filter bridge uses the same symbol names as mplayer/mpv's filter chain, which results in symbol clashes at link-time. This can be prevented by building ffmpeg with --disable-filter=mp, but unfortunately this is not the default. This means linking to libavdevice (which in turn forces linking with libavfilter by default) must be disabled. We try doing this by compiling a test file that defines one of the clashing symbols (vf_mpi_clear). To enable libavdevice input, ffmpeg should be built with the options: --disable-filter=mp and mpv with: --enable-libavdevice Originally, I tried to auto-detect it. But the resulting complications in configure did't seem worth the trouble.
2012-11-30 17:41:04 +00:00
*
* mpv is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
Relicense some non-MPlayer source files to LGPL 2.1 or later This covers source files which were added in mplayer2 and mpv times only, and where all code is covered by LGPL relicensing agreements. There are probably more files to which this applies, but I'm being conservative here. A file named ao_sdl.c exists in MPlayer too, but the mpv one is a complete rewrite, and was added some time after the original ao_sdl.c was removed. The same applies to vo_sdl.c, for which the SDL2 API is radically different in addition (MPlayer supports SDL 1.2 only). common.c contains only code written by me. But common.h is a strange case: although it originally was named mp_common.h and exists in MPlayer too, by now it contains only definitions written by uau and me. The exceptions are the CONTROL_ defines - thus not changing the license of common.h yet. codec_tags.c contained once large tables generated from MPlayer's codecs.conf, but all of these tables were removed. From demux_playlist.c I'm removing a code fragment from someone who was not asked; this probably could be done later (see commit 15dccc37). misc.c is a bit complicated to reason about (it was split off mplayer.c and thus contains random functions out of this file), but actually all functions have been added post-MPlayer. Except get_relative_time(), which was written by uau, but looks similar to 3 different versions of something similar in each of the Unix/win32/OSX timer source files. I'm not sure what that means in regards to copyright, so I've just moved it into another still-GPL source file for now. screenshot.c once had some minor parts of MPlayer's vf_screenshot.c, but they're all gone.
2016-01-19 17:36:06 +00:00
* GNU Lesser General Public License for more details.
demux_lavf: add support for libavdevice libavdevice supports various "special" video and audio inputs, such as screen-capture or libavfilter filter graphs. libavdevice inputs are implemented as demuxers. They don't use the custom stream callbacks (in AVFormatContext.pb). Instead, input parameters are passed as filename. This means the mpv stream layer has to be disabled. Do this by adding the pseudo stream handler avdevice://, whose only purpose is passing the filename to demux_lavf, without actually doing anything. Change the logic how the filename is passed to libavformat. Remove handling of the filename from demux_open_lavf() and move it to lavf_check_file(). (This also fixes a possible bug when skipping the "lavf://" prefix.) libavdevice now can be invoked by specifying demuxer and args as in: mpv avdevice://demuxer:args The args are passed as filename to libavformat. When using libavdevice demuxers, their actual meaning is highly implementation specific. They don't refer to actual filenames. Note: libavdevice is disabled by default. There is one problem: libavdevice pulls in libavfilter, which in turn causes symbol clashes with mpv internals. The problem is that libavfilter includes a mplayer filter bridge, which is used to interface with a set of nearly unmodified mplayer filters copied into libavfilter. This filter bridge uses the same symbol names as mplayer/mpv's filter chain, which results in symbol clashes at link-time. This can be prevented by building ffmpeg with --disable-filter=mp, but unfortunately this is not the default. This means linking to libavdevice (which in turn forces linking with libavfilter by default) must be disabled. We try doing this by compiling a test file that defines one of the clashing symbols (vf_mpi_clear). To enable libavdevice input, ffmpeg should be built with the options: --disable-filter=mp and mpv with: --enable-libavdevice Originally, I tried to auto-detect it. But the resulting complications in configure did't seem worth the trouble.
2012-11-30 17:41:04 +00:00
*
Relicense some non-MPlayer source files to LGPL 2.1 or later This covers source files which were added in mplayer2 and mpv times only, and where all code is covered by LGPL relicensing agreements. There are probably more files to which this applies, but I'm being conservative here. A file named ao_sdl.c exists in MPlayer too, but the mpv one is a complete rewrite, and was added some time after the original ao_sdl.c was removed. The same applies to vo_sdl.c, for which the SDL2 API is radically different in addition (MPlayer supports SDL 1.2 only). common.c contains only code written by me. But common.h is a strange case: although it originally was named mp_common.h and exists in MPlayer too, by now it contains only definitions written by uau and me. The exceptions are the CONTROL_ defines - thus not changing the license of common.h yet. codec_tags.c contained once large tables generated from MPlayer's codecs.conf, but all of these tables were removed. From demux_playlist.c I'm removing a code fragment from someone who was not asked; this probably could be done later (see commit 15dccc37). misc.c is a bit complicated to reason about (it was split off mplayer.c and thus contains random functions out of this file), but actually all functions have been added post-MPlayer. Except get_relative_time(), which was written by uau, but looks similar to 3 different versions of something similar in each of the Unix/win32/OSX timer source files. I'm not sure what that means in regards to copyright, so I've just moved it into another still-GPL source file for now. screenshot.c once had some minor parts of MPlayer's vf_screenshot.c, but they're all gone.
2016-01-19 17:36:06 +00:00
* You should have received a copy of the GNU Lesser General Public
* License along with mpv. If not, see <http://www.gnu.org/licenses/>.
demux_lavf: add support for libavdevice libavdevice supports various "special" video and audio inputs, such as screen-capture or libavfilter filter graphs. libavdevice inputs are implemented as demuxers. They don't use the custom stream callbacks (in AVFormatContext.pb). Instead, input parameters are passed as filename. This means the mpv stream layer has to be disabled. Do this by adding the pseudo stream handler avdevice://, whose only purpose is passing the filename to demux_lavf, without actually doing anything. Change the logic how the filename is passed to libavformat. Remove handling of the filename from demux_open_lavf() and move it to lavf_check_file(). (This also fixes a possible bug when skipping the "lavf://" prefix.) libavdevice now can be invoked by specifying demuxer and args as in: mpv avdevice://demuxer:args The args are passed as filename to libavformat. When using libavdevice demuxers, their actual meaning is highly implementation specific. They don't refer to actual filenames. Note: libavdevice is disabled by default. There is one problem: libavdevice pulls in libavfilter, which in turn causes symbol clashes with mpv internals. The problem is that libavfilter includes a mplayer filter bridge, which is used to interface with a set of nearly unmodified mplayer filters copied into libavfilter. This filter bridge uses the same symbol names as mplayer/mpv's filter chain, which results in symbol clashes at link-time. This can be prevented by building ffmpeg with --disable-filter=mp, but unfortunately this is not the default. This means linking to libavdevice (which in turn forces linking with libavfilter by default) must be disabled. We try doing this by compiling a test file that defines one of the clashing symbols (vf_mpi_clear). To enable libavdevice input, ffmpeg should be built with the options: --disable-filter=mp and mpv with: --enable-libavdevice Originally, I tried to auto-detect it. But the resulting complications in configure did't seem worth the trouble.
2012-11-30 17:41:04 +00:00
*/
#include "config.h"
#include "stream.h"
static int open_f(stream_t *stream)
demux_lavf: add support for libavdevice libavdevice supports various "special" video and audio inputs, such as screen-capture or libavfilter filter graphs. libavdevice inputs are implemented as demuxers. They don't use the custom stream callbacks (in AVFormatContext.pb). Instead, input parameters are passed as filename. This means the mpv stream layer has to be disabled. Do this by adding the pseudo stream handler avdevice://, whose only purpose is passing the filename to demux_lavf, without actually doing anything. Change the logic how the filename is passed to libavformat. Remove handling of the filename from demux_open_lavf() and move it to lavf_check_file(). (This also fixes a possible bug when skipping the "lavf://" prefix.) libavdevice now can be invoked by specifying demuxer and args as in: mpv avdevice://demuxer:args The args are passed as filename to libavformat. When using libavdevice demuxers, their actual meaning is highly implementation specific. They don't refer to actual filenames. Note: libavdevice is disabled by default. There is one problem: libavdevice pulls in libavfilter, which in turn causes symbol clashes with mpv internals. The problem is that libavfilter includes a mplayer filter bridge, which is used to interface with a set of nearly unmodified mplayer filters copied into libavfilter. This filter bridge uses the same symbol names as mplayer/mpv's filter chain, which results in symbol clashes at link-time. This can be prevented by building ffmpeg with --disable-filter=mp, but unfortunately this is not the default. This means linking to libavdevice (which in turn forces linking with libavfilter by default) must be disabled. We try doing this by compiling a test file that defines one of the clashing symbols (vf_mpi_clear). To enable libavdevice input, ffmpeg should be built with the options: --disable-filter=mp and mpv with: --enable-libavdevice Originally, I tried to auto-detect it. But the resulting complications in configure did't seem worth the trouble.
2012-11-30 17:41:04 +00:00
{
stream->demuxer = "lavf";
stream->allow_caching = false;
demux_lavf: add support for libavdevice libavdevice supports various "special" video and audio inputs, such as screen-capture or libavfilter filter graphs. libavdevice inputs are implemented as demuxers. They don't use the custom stream callbacks (in AVFormatContext.pb). Instead, input parameters are passed as filename. This means the mpv stream layer has to be disabled. Do this by adding the pseudo stream handler avdevice://, whose only purpose is passing the filename to demux_lavf, without actually doing anything. Change the logic how the filename is passed to libavformat. Remove handling of the filename from demux_open_lavf() and move it to lavf_check_file(). (This also fixes a possible bug when skipping the "lavf://" prefix.) libavdevice now can be invoked by specifying demuxer and args as in: mpv avdevice://demuxer:args The args are passed as filename to libavformat. When using libavdevice demuxers, their actual meaning is highly implementation specific. They don't refer to actual filenames. Note: libavdevice is disabled by default. There is one problem: libavdevice pulls in libavfilter, which in turn causes symbol clashes with mpv internals. The problem is that libavfilter includes a mplayer filter bridge, which is used to interface with a set of nearly unmodified mplayer filters copied into libavfilter. This filter bridge uses the same symbol names as mplayer/mpv's filter chain, which results in symbol clashes at link-time. This can be prevented by building ffmpeg with --disable-filter=mp, but unfortunately this is not the default. This means linking to libavdevice (which in turn forces linking with libavfilter by default) must be disabled. We try doing this by compiling a test file that defines one of the clashing symbols (vf_mpi_clear). To enable libavdevice input, ffmpeg should be built with the options: --disable-filter=mp and mpv with: --enable-libavdevice Originally, I tried to auto-detect it. But the resulting complications in configure did't seem worth the trouble.
2012-11-30 17:41:04 +00:00
return STREAM_OK;
}
const stream_info_t stream_info_avdevice = {
.name = "avdevice",
.open = open_f,
.protocols = (const char*const[]){ "avdevice", "av", NULL },
demux_lavf: add support for libavdevice libavdevice supports various "special" video and audio inputs, such as screen-capture or libavfilter filter graphs. libavdevice inputs are implemented as demuxers. They don't use the custom stream callbacks (in AVFormatContext.pb). Instead, input parameters are passed as filename. This means the mpv stream layer has to be disabled. Do this by adding the pseudo stream handler avdevice://, whose only purpose is passing the filename to demux_lavf, without actually doing anything. Change the logic how the filename is passed to libavformat. Remove handling of the filename from demux_open_lavf() and move it to lavf_check_file(). (This also fixes a possible bug when skipping the "lavf://" prefix.) libavdevice now can be invoked by specifying demuxer and args as in: mpv avdevice://demuxer:args The args are passed as filename to libavformat. When using libavdevice demuxers, their actual meaning is highly implementation specific. They don't refer to actual filenames. Note: libavdevice is disabled by default. There is one problem: libavdevice pulls in libavfilter, which in turn causes symbol clashes with mpv internals. The problem is that libavfilter includes a mplayer filter bridge, which is used to interface with a set of nearly unmodified mplayer filters copied into libavfilter. This filter bridge uses the same symbol names as mplayer/mpv's filter chain, which results in symbol clashes at link-time. This can be prevented by building ffmpeg with --disable-filter=mp, but unfortunately this is not the default. This means linking to libavdevice (which in turn forces linking with libavfilter by default) must be disabled. We try doing this by compiling a test file that defines one of the clashing symbols (vf_mpi_clear). To enable libavdevice input, ffmpeg should be built with the options: --disable-filter=mp and mpv with: --enable-libavdevice Originally, I tried to auto-detect it. But the resulting complications in configure did't seem worth the trouble.
2012-11-30 17:41:04 +00:00
};