vo_opengl: add DRM EGL backend
Notes:
- Unfortunately the only way to talk to EGL from within DRM I could find
involves linking with GBM (generic buffer management for Mesa.)
Because of this, I'm pretty sure it won't work with proprietary NVidia
drivers, but then again, last time I checked NVidia didn't offer
proper screen resolution for VT.
- VT switching doesn't seem to work at all. It's worth mentioning that
using vo_drm before introduction of VT switcher had an anomaly where
user could switch to another VT and input text to it, while video
played on top of that VT. However, that isn't the case with drm_egl:
I can't switch to other VT during playback like this. This makes me
think that it's either a limitation coming from my firmware or from
EGL/KMS itself rather than a bug with my code. Nonetheless, I still
left (untestable) VT switching code in place, in case it's useful to
someone else.
- The mode_id, connector_id and device_path should be configurable for
power users and people who wish to watch videos on nonprimary screen.
Unfortunately I didn't see anything that would allow OpenGL backends
to register their own set of options. At the same time, adding them to
global namespace is pointless.
- A few dozens of lines could be shared with vo_drm (setting up VT
switching, most of code behind page flipping). I don't have any strong
opinion on this.
- Sometimes I get minor visual glitches. I'm not sure if there's a race
condition of some sort, unitialized variable (doubtful), or if it's
buggy driver. (I'm using integrated Intel HD Graphics 4400 with Mesa)
- .config and .control are very minimal.
Signed-off-by: wm4 <wm4@nowhere>
2015-11-07 18:06:57 +00:00
|
|
|
/*
|
|
|
|
* This file is part of mpv.
|
|
|
|
*
|
2016-01-19 17:36:34 +00:00
|
|
|
* mpv is free software; you can redistribute it and/or
|
|
|
|
* modify it under the terms of the GNU Lesser General Public
|
|
|
|
* License as published by the Free Software Foundation; either
|
|
|
|
* version 2.1 of the License, or (at your option) any later version.
|
vo_opengl: add DRM EGL backend
Notes:
- Unfortunately the only way to talk to EGL from within DRM I could find
involves linking with GBM (generic buffer management for Mesa.)
Because of this, I'm pretty sure it won't work with proprietary NVidia
drivers, but then again, last time I checked NVidia didn't offer
proper screen resolution for VT.
- VT switching doesn't seem to work at all. It's worth mentioning that
using vo_drm before introduction of VT switcher had an anomaly where
user could switch to another VT and input text to it, while video
played on top of that VT. However, that isn't the case with drm_egl:
I can't switch to other VT during playback like this. This makes me
think that it's either a limitation coming from my firmware or from
EGL/KMS itself rather than a bug with my code. Nonetheless, I still
left (untestable) VT switching code in place, in case it's useful to
someone else.
- The mode_id, connector_id and device_path should be configurable for
power users and people who wish to watch videos on nonprimary screen.
Unfortunately I didn't see anything that would allow OpenGL backends
to register their own set of options. At the same time, adding them to
global namespace is pointless.
- A few dozens of lines could be shared with vo_drm (setting up VT
switching, most of code behind page flipping). I don't have any strong
opinion on this.
- Sometimes I get minor visual glitches. I'm not sure if there's a race
condition of some sort, unitialized variable (doubtful), or if it's
buggy driver. (I'm using integrated Intel HD Graphics 4400 with Mesa)
- .config and .control are very minimal.
Signed-off-by: wm4 <wm4@nowhere>
2015-11-07 18:06:57 +00:00
|
|
|
*
|
|
|
|
* mpv is distributed in the hope that it will be useful,
|
|
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
2016-01-19 17:36:34 +00:00
|
|
|
* GNU Lesser General Public License for more details.
|
2015-11-07 22:22:38 +00:00
|
|
|
*
|
2016-01-19 17:36:34 +00:00
|
|
|
* You should have received a copy of the GNU Lesser General Public
|
|
|
|
* License along with mpv. If not, see <http://www.gnu.org/licenses/>.
|
vo_opengl: add DRM EGL backend
Notes:
- Unfortunately the only way to talk to EGL from within DRM I could find
involves linking with GBM (generic buffer management for Mesa.)
Because of this, I'm pretty sure it won't work with proprietary NVidia
drivers, but then again, last time I checked NVidia didn't offer
proper screen resolution for VT.
- VT switching doesn't seem to work at all. It's worth mentioning that
using vo_drm before introduction of VT switcher had an anomaly where
user could switch to another VT and input text to it, while video
played on top of that VT. However, that isn't the case with drm_egl:
I can't switch to other VT during playback like this. This makes me
think that it's either a limitation coming from my firmware or from
EGL/KMS itself rather than a bug with my code. Nonetheless, I still
left (untestable) VT switching code in place, in case it's useful to
someone else.
- The mode_id, connector_id and device_path should be configurable for
power users and people who wish to watch videos on nonprimary screen.
Unfortunately I didn't see anything that would allow OpenGL backends
to register their own set of options. At the same time, adding them to
global namespace is pointless.
- A few dozens of lines could be shared with vo_drm (setting up VT
switching, most of code behind page flipping). I don't have any strong
opinion on this.
- Sometimes I get minor visual glitches. I'm not sure if there's a race
condition of some sort, unitialized variable (doubtful), or if it's
buggy driver. (I'm using integrated Intel HD Graphics 4400 with Mesa)
- .config and .control are very minimal.
Signed-off-by: wm4 <wm4@nowhere>
2015-11-07 18:06:57 +00:00
|
|
|
*/
|
|
|
|
|
|
|
|
#include <assert.h>
|
|
|
|
#include <errno.h>
|
|
|
|
#include <fcntl.h>
|
|
|
|
#include <signal.h>
|
|
|
|
#include <string.h>
|
2017-01-09 15:21:28 +00:00
|
|
|
#include <poll.h>
|
vo_opengl: add DRM EGL backend
Notes:
- Unfortunately the only way to talk to EGL from within DRM I could find
involves linking with GBM (generic buffer management for Mesa.)
Because of this, I'm pretty sure it won't work with proprietary NVidia
drivers, but then again, last time I checked NVidia didn't offer
proper screen resolution for VT.
- VT switching doesn't seem to work at all. It's worth mentioning that
using vo_drm before introduction of VT switcher had an anomaly where
user could switch to another VT and input text to it, while video
played on top of that VT. However, that isn't the case with drm_egl:
I can't switch to other VT during playback like this. This makes me
think that it's either a limitation coming from my firmware or from
EGL/KMS itself rather than a bug with my code. Nonetheless, I still
left (untestable) VT switching code in place, in case it's useful to
someone else.
- The mode_id, connector_id and device_path should be configurable for
power users and people who wish to watch videos on nonprimary screen.
Unfortunately I didn't see anything that would allow OpenGL backends
to register their own set of options. At the same time, adding them to
global namespace is pointless.
- A few dozens of lines could be shared with vo_drm (setting up VT
switching, most of code behind page flipping). I don't have any strong
opinion on this.
- Sometimes I get minor visual glitches. I'm not sure if there's a race
condition of some sort, unitialized variable (doubtful), or if it's
buggy driver. (I'm using integrated Intel HD Graphics 4400 with Mesa)
- .config and .control are very minimal.
Signed-off-by: wm4 <wm4@nowhere>
2015-11-07 18:06:57 +00:00
|
|
|
#include <unistd.h>
|
|
|
|
|
|
|
|
#include <gbm.h>
|
|
|
|
#include <EGL/egl.h>
|
|
|
|
#include <EGL/eglext.h>
|
|
|
|
|
2018-04-29 13:09:16 +00:00
|
|
|
#include "libmpv/render_gl.h"
|
vo_opengl: add DRM EGL backend
Notes:
- Unfortunately the only way to talk to EGL from within DRM I could find
involves linking with GBM (generic buffer management for Mesa.)
Because of this, I'm pretty sure it won't work with proprietary NVidia
drivers, but then again, last time I checked NVidia didn't offer
proper screen resolution for VT.
- VT switching doesn't seem to work at all. It's worth mentioning that
using vo_drm before introduction of VT switcher had an anomaly where
user could switch to another VT and input text to it, while video
played on top of that VT. However, that isn't the case with drm_egl:
I can't switch to other VT during playback like this. This makes me
think that it's either a limitation coming from my firmware or from
EGL/KMS itself rather than a bug with my code. Nonetheless, I still
left (untestable) VT switching code in place, in case it's useful to
someone else.
- The mode_id, connector_id and device_path should be configurable for
power users and people who wish to watch videos on nonprimary screen.
Unfortunately I didn't see anything that would allow OpenGL backends
to register their own set of options. At the same time, adding them to
global namespace is pointless.
- A few dozens of lines could be shared with vo_drm (setting up VT
switching, most of code behind page flipping). I don't have any strong
opinion on this.
- Sometimes I get minor visual glitches. I'm not sure if there's a race
condition of some sort, unitialized variable (doubtful), or if it's
buggy driver. (I'm using integrated Intel HD Graphics 4400 with Mesa)
- .config and .control are very minimal.
Signed-off-by: wm4 <wm4@nowhere>
2015-11-07 18:06:57 +00:00
|
|
|
#include "video/out/drm_common.h"
|
vo_opengl: refactor into vo_gpu
This is done in several steps:
1. refactor MPGLContext -> struct ra_ctx
2. move GL-specific stuff in vo_opengl into opengl/context.c
3. generalize context creation to support other APIs, and add --gpu-api
4. rename all of the --opengl- options that are no longer opengl-specific
5. move all of the stuff from opengl/* that isn't GL-specific into gpu/
(note: opengl/gl_utils.h became opengl/utils.h)
6. rename vo_opengl to vo_gpu
7. to handle window screenshots, the short-term approach was to just add
it to ra_swchain_fns. Long term (and for vulkan) this has to be moved to
ra itself (and vo_gpu altered to compensate), but this was a stop-gap
measure to prevent this commit from getting too big
8. move ra->fns->flush to ra_gl_ctx instead
9. some other minor changes that I've probably already forgotten
Note: This is one half of a major refactor, the other half of which is
provided by rossy's following commit. This commit enables support for
all linux platforms, while his version enables support for all non-linux
platforms.
Note 2: vo_opengl_cb.c also re-uses ra_gl_ctx so it benefits from the
--opengl- options like --opengl-early-flush, --opengl-finish etc. Should
be a strict superset of the old functionality.
Disclaimer: Since I have no way of compiling mpv on all platforms, some
of these ports were done blindly. Specifically, the blind ports included
context_mali_fbdev.c and context_rpi.c. Since they're both based on
egl_helpers, the port should have gone smoothly without any major
changes required. But if somebody complains about a compile error on
those platforms (assuming anybody actually uses them), you know where to
complain.
2017-09-14 06:04:55 +00:00
|
|
|
#include "common/common.h"
|
2018-02-24 17:53:16 +00:00
|
|
|
#include "osdep/timer.h"
|
vo_opengl: refactor into vo_gpu
This is done in several steps:
1. refactor MPGLContext -> struct ra_ctx
2. move GL-specific stuff in vo_opengl into opengl/context.c
3. generalize context creation to support other APIs, and add --gpu-api
4. rename all of the --opengl- options that are no longer opengl-specific
5. move all of the stuff from opengl/* that isn't GL-specific into gpu/
(note: opengl/gl_utils.h became opengl/utils.h)
6. rename vo_opengl to vo_gpu
7. to handle window screenshots, the short-term approach was to just add
it to ra_swchain_fns. Long term (and for vulkan) this has to be moved to
ra itself (and vo_gpu altered to compensate), but this was a stop-gap
measure to prevent this commit from getting too big
8. move ra->fns->flush to ra_gl_ctx instead
9. some other minor changes that I've probably already forgotten
Note: This is one half of a major refactor, the other half of which is
provided by rossy's following commit. This commit enables support for
all linux platforms, while his version enables support for all non-linux
platforms.
Note 2: vo_opengl_cb.c also re-uses ra_gl_ctx so it benefits from the
--opengl- options like --opengl-early-flush, --opengl-finish etc. Should
be a strict superset of the old functionality.
Disclaimer: Since I have no way of compiling mpv on all platforms, some
of these ports were done blindly. Specifically, the blind ports included
context_mali_fbdev.c and context_rpi.c. Since they're both based on
egl_helpers, the port should have gone smoothly without any major
changes required. But if somebody complains about a compile error on
those platforms (assuming anybody actually uses them), you know where to
complain.
2017-09-14 06:04:55 +00:00
|
|
|
|
|
|
|
#include "egl_helpers.h"
|
|
|
|
#include "common.h"
|
|
|
|
#include "context.h"
|
vo_opengl: add DRM EGL backend
Notes:
- Unfortunately the only way to talk to EGL from within DRM I could find
involves linking with GBM (generic buffer management for Mesa.)
Because of this, I'm pretty sure it won't work with proprietary NVidia
drivers, but then again, last time I checked NVidia didn't offer
proper screen resolution for VT.
- VT switching doesn't seem to work at all. It's worth mentioning that
using vo_drm before introduction of VT switcher had an anomaly where
user could switch to another VT and input text to it, while video
played on top of that VT. However, that isn't the case with drm_egl:
I can't switch to other VT during playback like this. This makes me
think that it's either a limitation coming from my firmware or from
EGL/KMS itself rather than a bug with my code. Nonetheless, I still
left (untestable) VT switching code in place, in case it's useful to
someone else.
- The mode_id, connector_id and device_path should be configurable for
power users and people who wish to watch videos on nonprimary screen.
Unfortunately I didn't see anything that would allow OpenGL backends
to register their own set of options. At the same time, adding them to
global namespace is pointless.
- A few dozens of lines could be shared with vo_drm (setting up VT
switching, most of code behind page flipping). I don't have any strong
opinion on this.
- Sometimes I get minor visual glitches. I'm not sure if there's a race
condition of some sort, unitialized variable (doubtful), or if it's
buggy driver. (I'm using integrated Intel HD Graphics 4400 with Mesa)
- .config and .control are very minimal.
Signed-off-by: wm4 <wm4@nowhere>
2015-11-07 18:06:57 +00:00
|
|
|
|
2019-09-26 23:41:53 +00:00
|
|
|
#ifndef EGL_PLATFORM_GBM_MESA
|
|
|
|
#define EGL_PLATFORM_GBM_MESA 0x31D7
|
|
|
|
#endif
|
|
|
|
|
|
|
|
#ifndef EGL_PLATFORM_GBM_KHR
|
|
|
|
#define EGL_PLATFORM_GBM_KHR 0x31D7
|
|
|
|
#endif
|
|
|
|
|
vo_opengl: add DRM EGL backend
Notes:
- Unfortunately the only way to talk to EGL from within DRM I could find
involves linking with GBM (generic buffer management for Mesa.)
Because of this, I'm pretty sure it won't work with proprietary NVidia
drivers, but then again, last time I checked NVidia didn't offer
proper screen resolution for VT.
- VT switching doesn't seem to work at all. It's worth mentioning that
using vo_drm before introduction of VT switcher had an anomaly where
user could switch to another VT and input text to it, while video
played on top of that VT. However, that isn't the case with drm_egl:
I can't switch to other VT during playback like this. This makes me
think that it's either a limitation coming from my firmware or from
EGL/KMS itself rather than a bug with my code. Nonetheless, I still
left (untestable) VT switching code in place, in case it's useful to
someone else.
- The mode_id, connector_id and device_path should be configurable for
power users and people who wish to watch videos on nonprimary screen.
Unfortunately I didn't see anything that would allow OpenGL backends
to register their own set of options. At the same time, adding them to
global namespace is pointless.
- A few dozens of lines could be shared with vo_drm (setting up VT
switching, most of code behind page flipping). I don't have any strong
opinion on this.
- Sometimes I get minor visual glitches. I'm not sure if there's a race
condition of some sort, unitialized variable (doubtful), or if it's
buggy driver. (I'm using integrated Intel HD Graphics 4400 with Mesa)
- .config and .control are very minimal.
Signed-off-by: wm4 <wm4@nowhere>
2015-11-07 18:06:57 +00:00
|
|
|
#define USE_MASTER 0
|
|
|
|
|
|
|
|
struct framebuffer
|
|
|
|
{
|
|
|
|
int fd;
|
2017-10-05 21:44:54 +00:00
|
|
|
uint32_t width, height;
|
|
|
|
uint32_t id;
|
vo_opengl: add DRM EGL backend
Notes:
- Unfortunately the only way to talk to EGL from within DRM I could find
involves linking with GBM (generic buffer management for Mesa.)
Because of this, I'm pretty sure it won't work with proprietary NVidia
drivers, but then again, last time I checked NVidia didn't offer
proper screen resolution for VT.
- VT switching doesn't seem to work at all. It's worth mentioning that
using vo_drm before introduction of VT switcher had an anomaly where
user could switch to another VT and input text to it, while video
played on top of that VT. However, that isn't the case with drm_egl:
I can't switch to other VT during playback like this. This makes me
think that it's either a limitation coming from my firmware or from
EGL/KMS itself rather than a bug with my code. Nonetheless, I still
left (untestable) VT switching code in place, in case it's useful to
someone else.
- The mode_id, connector_id and device_path should be configurable for
power users and people who wish to watch videos on nonprimary screen.
Unfortunately I didn't see anything that would allow OpenGL backends
to register their own set of options. At the same time, adding them to
global namespace is pointless.
- A few dozens of lines could be shared with vo_drm (setting up VT
switching, most of code behind page flipping). I don't have any strong
opinion on this.
- Sometimes I get minor visual glitches. I'm not sure if there's a race
condition of some sort, unitialized variable (doubtful), or if it's
buggy driver. (I'm using integrated Intel HD Graphics 4400 with Mesa)
- .config and .control are very minimal.
Signed-off-by: wm4 <wm4@nowhere>
2015-11-07 18:06:57 +00:00
|
|
|
};
|
|
|
|
|
2018-12-08 20:47:18 +00:00
|
|
|
struct gbm_frame {
|
|
|
|
struct gbm_bo *bo;
|
2019-04-14 14:03:22 +00:00
|
|
|
struct drm_vsync_tuple vsync;
|
2018-12-08 20:47:18 +00:00
|
|
|
};
|
|
|
|
|
vo_opengl: add DRM EGL backend
Notes:
- Unfortunately the only way to talk to EGL from within DRM I could find
involves linking with GBM (generic buffer management for Mesa.)
Because of this, I'm pretty sure it won't work with proprietary NVidia
drivers, but then again, last time I checked NVidia didn't offer
proper screen resolution for VT.
- VT switching doesn't seem to work at all. It's worth mentioning that
using vo_drm before introduction of VT switcher had an anomaly where
user could switch to another VT and input text to it, while video
played on top of that VT. However, that isn't the case with drm_egl:
I can't switch to other VT during playback like this. This makes me
think that it's either a limitation coming from my firmware or from
EGL/KMS itself rather than a bug with my code. Nonetheless, I still
left (untestable) VT switching code in place, in case it's useful to
someone else.
- The mode_id, connector_id and device_path should be configurable for
power users and people who wish to watch videos on nonprimary screen.
Unfortunately I didn't see anything that would allow OpenGL backends
to register their own set of options. At the same time, adding them to
global namespace is pointless.
- A few dozens of lines could be shared with vo_drm (setting up VT
switching, most of code behind page flipping). I don't have any strong
opinion on this.
- Sometimes I get minor visual glitches. I'm not sure if there's a race
condition of some sort, unitialized variable (doubtful), or if it's
buggy driver. (I'm using integrated Intel HD Graphics 4400 with Mesa)
- .config and .control are very minimal.
Signed-off-by: wm4 <wm4@nowhere>
2015-11-07 18:06:57 +00:00
|
|
|
struct gbm
|
|
|
|
{
|
|
|
|
struct gbm_surface *surface;
|
|
|
|
struct gbm_device *device;
|
2018-12-08 20:47:18 +00:00
|
|
|
struct gbm_frame **bo_queue;
|
2018-11-27 17:39:16 +00:00
|
|
|
unsigned int num_bos;
|
vo_opengl: add DRM EGL backend
Notes:
- Unfortunately the only way to talk to EGL from within DRM I could find
involves linking with GBM (generic buffer management for Mesa.)
Because of this, I'm pretty sure it won't work with proprietary NVidia
drivers, but then again, last time I checked NVidia didn't offer
proper screen resolution for VT.
- VT switching doesn't seem to work at all. It's worth mentioning that
using vo_drm before introduction of VT switcher had an anomaly where
user could switch to another VT and input text to it, while video
played on top of that VT. However, that isn't the case with drm_egl:
I can't switch to other VT during playback like this. This makes me
think that it's either a limitation coming from my firmware or from
EGL/KMS itself rather than a bug with my code. Nonetheless, I still
left (untestable) VT switching code in place, in case it's useful to
someone else.
- The mode_id, connector_id and device_path should be configurable for
power users and people who wish to watch videos on nonprimary screen.
Unfortunately I didn't see anything that would allow OpenGL backends
to register their own set of options. At the same time, adding them to
global namespace is pointless.
- A few dozens of lines could be shared with vo_drm (setting up VT
switching, most of code behind page flipping). I don't have any strong
opinion on this.
- Sometimes I get minor visual glitches. I'm not sure if there's a race
condition of some sort, unitialized variable (doubtful), or if it's
buggy driver. (I'm using integrated Intel HD Graphics 4400 with Mesa)
- .config and .control are very minimal.
Signed-off-by: wm4 <wm4@nowhere>
2015-11-07 18:06:57 +00:00
|
|
|
};
|
|
|
|
|
|
|
|
struct egl
|
|
|
|
{
|
|
|
|
EGLDisplay display;
|
|
|
|
EGLContext context;
|
|
|
|
EGLSurface surface;
|
|
|
|
};
|
|
|
|
|
|
|
|
struct priv {
|
vo_opengl: refactor into vo_gpu
This is done in several steps:
1. refactor MPGLContext -> struct ra_ctx
2. move GL-specific stuff in vo_opengl into opengl/context.c
3. generalize context creation to support other APIs, and add --gpu-api
4. rename all of the --opengl- options that are no longer opengl-specific
5. move all of the stuff from opengl/* that isn't GL-specific into gpu/
(note: opengl/gl_utils.h became opengl/utils.h)
6. rename vo_opengl to vo_gpu
7. to handle window screenshots, the short-term approach was to just add
it to ra_swchain_fns. Long term (and for vulkan) this has to be moved to
ra itself (and vo_gpu altered to compensate), but this was a stop-gap
measure to prevent this commit from getting too big
8. move ra->fns->flush to ra_gl_ctx instead
9. some other minor changes that I've probably already forgotten
Note: This is one half of a major refactor, the other half of which is
provided by rossy's following commit. This commit enables support for
all linux platforms, while his version enables support for all non-linux
platforms.
Note 2: vo_opengl_cb.c also re-uses ra_gl_ctx so it benefits from the
--opengl- options like --opengl-early-flush, --opengl-finish etc. Should
be a strict superset of the old functionality.
Disclaimer: Since I have no way of compiling mpv on all platforms, some
of these ports were done blindly. Specifically, the blind ports included
context_mali_fbdev.c and context_rpi.c. Since they're both based on
egl_helpers, the port should have gone smoothly without any major
changes required. But if somebody complains about a compile error on
those platforms (assuming anybody actually uses them), you know where to
complain.
2017-09-14 06:04:55 +00:00
|
|
|
GL gl;
|
vo_opengl: add DRM EGL backend
Notes:
- Unfortunately the only way to talk to EGL from within DRM I could find
involves linking with GBM (generic buffer management for Mesa.)
Because of this, I'm pretty sure it won't work with proprietary NVidia
drivers, but then again, last time I checked NVidia didn't offer
proper screen resolution for VT.
- VT switching doesn't seem to work at all. It's worth mentioning that
using vo_drm before introduction of VT switcher had an anomaly where
user could switch to another VT and input text to it, while video
played on top of that VT. However, that isn't the case with drm_egl:
I can't switch to other VT during playback like this. This makes me
think that it's either a limitation coming from my firmware or from
EGL/KMS itself rather than a bug with my code. Nonetheless, I still
left (untestable) VT switching code in place, in case it's useful to
someone else.
- The mode_id, connector_id and device_path should be configurable for
power users and people who wish to watch videos on nonprimary screen.
Unfortunately I didn't see anything that would allow OpenGL backends
to register their own set of options. At the same time, adding them to
global namespace is pointless.
- A few dozens of lines could be shared with vo_drm (setting up VT
switching, most of code behind page flipping). I don't have any strong
opinion on this.
- Sometimes I get minor visual glitches. I'm not sure if there's a race
condition of some sort, unitialized variable (doubtful), or if it's
buggy driver. (I'm using integrated Intel HD Graphics 4400 with Mesa)
- .config and .control are very minimal.
Signed-off-by: wm4 <wm4@nowhere>
2015-11-07 18:06:57 +00:00
|
|
|
struct kms *kms;
|
|
|
|
|
|
|
|
drmEventContext ev;
|
|
|
|
drmModeCrtc *old_crtc;
|
|
|
|
|
|
|
|
struct egl egl;
|
|
|
|
struct gbm gbm;
|
2017-10-05 21:44:54 +00:00
|
|
|
struct framebuffer *fb;
|
vo_opengl: add DRM EGL backend
Notes:
- Unfortunately the only way to talk to EGL from within DRM I could find
involves linking with GBM (generic buffer management for Mesa.)
Because of this, I'm pretty sure it won't work with proprietary NVidia
drivers, but then again, last time I checked NVidia didn't offer
proper screen resolution for VT.
- VT switching doesn't seem to work at all. It's worth mentioning that
using vo_drm before introduction of VT switcher had an anomaly where
user could switch to another VT and input text to it, while video
played on top of that VT. However, that isn't the case with drm_egl:
I can't switch to other VT during playback like this. This makes me
think that it's either a limitation coming from my firmware or from
EGL/KMS itself rather than a bug with my code. Nonetheless, I still
left (untestable) VT switching code in place, in case it's useful to
someone else.
- The mode_id, connector_id and device_path should be configurable for
power users and people who wish to watch videos on nonprimary screen.
Unfortunately I didn't see anything that would allow OpenGL backends
to register their own set of options. At the same time, adding them to
global namespace is pointless.
- A few dozens of lines could be shared with vo_drm (setting up VT
switching, most of code behind page flipping). I don't have any strong
opinion on this.
- Sometimes I get minor visual glitches. I'm not sure if there's a race
condition of some sort, unitialized variable (doubtful), or if it's
buggy driver. (I'm using integrated Intel HD Graphics 4400 with Mesa)
- .config and .control are very minimal.
Signed-off-by: wm4 <wm4@nowhere>
2015-11-07 18:06:57 +00:00
|
|
|
|
2018-11-27 17:39:16 +00:00
|
|
|
GLsync *vsync_fences;
|
|
|
|
unsigned int num_vsync_fences;
|
|
|
|
|
2018-02-13 17:40:47 +00:00
|
|
|
uint32_t gbm_format;
|
2017-11-09 08:54:28 +00:00
|
|
|
|
vo_opengl: add DRM EGL backend
Notes:
- Unfortunately the only way to talk to EGL from within DRM I could find
involves linking with GBM (generic buffer management for Mesa.)
Because of this, I'm pretty sure it won't work with proprietary NVidia
drivers, but then again, last time I checked NVidia didn't offer
proper screen resolution for VT.
- VT switching doesn't seem to work at all. It's worth mentioning that
using vo_drm before introduction of VT switcher had an anomaly where
user could switch to another VT and input text to it, while video
played on top of that VT. However, that isn't the case with drm_egl:
I can't switch to other VT during playback like this. This makes me
think that it's either a limitation coming from my firmware or from
EGL/KMS itself rather than a bug with my code. Nonetheless, I still
left (untestable) VT switching code in place, in case it's useful to
someone else.
- The mode_id, connector_id and device_path should be configurable for
power users and people who wish to watch videos on nonprimary screen.
Unfortunately I didn't see anything that would allow OpenGL backends
to register their own set of options. At the same time, adding them to
global namespace is pointless.
- A few dozens of lines could be shared with vo_drm (setting up VT
switching, most of code behind page flipping). I don't have any strong
opinion on this.
- Sometimes I get minor visual glitches. I'm not sure if there's a race
condition of some sort, unitialized variable (doubtful), or if it's
buggy driver. (I'm using integrated Intel HD Graphics 4400 with Mesa)
- .config and .control are very minimal.
Signed-off-by: wm4 <wm4@nowhere>
2015-11-07 18:06:57 +00:00
|
|
|
bool active;
|
|
|
|
bool waiting_for_flip;
|
|
|
|
|
|
|
|
bool vt_switcher_active;
|
|
|
|
struct vt_switcher vt_switcher;
|
2017-10-23 15:51:49 +00:00
|
|
|
|
2018-11-27 17:39:16 +00:00
|
|
|
bool still;
|
|
|
|
bool paused;
|
|
|
|
|
2019-04-14 14:03:22 +00:00
|
|
|
struct drm_vsync_tuple vsync;
|
2018-12-08 20:47:18 +00:00
|
|
|
struct vo_vsync_info vsync_info;
|
|
|
|
|
2019-09-12 19:00:50 +00:00
|
|
|
struct mpv_opengl_drm_params_v2 drm_params;
|
2018-12-01 11:01:17 +00:00
|
|
|
struct mpv_opengl_drm_draw_surface_size draw_surface_size;
|
vo_opengl: add DRM EGL backend
Notes:
- Unfortunately the only way to talk to EGL from within DRM I could find
involves linking with GBM (generic buffer management for Mesa.)
Because of this, I'm pretty sure it won't work with proprietary NVidia
drivers, but then again, last time I checked NVidia didn't offer
proper screen resolution for VT.
- VT switching doesn't seem to work at all. It's worth mentioning that
using vo_drm before introduction of VT switcher had an anomaly where
user could switch to another VT and input text to it, while video
played on top of that VT. However, that isn't the case with drm_egl:
I can't switch to other VT during playback like this. This makes me
think that it's either a limitation coming from my firmware or from
EGL/KMS itself rather than a bug with my code. Nonetheless, I still
left (untestable) VT switching code in place, in case it's useful to
someone else.
- The mode_id, connector_id and device_path should be configurable for
power users and people who wish to watch videos on nonprimary screen.
Unfortunately I didn't see anything that would allow OpenGL backends
to register their own set of options. At the same time, adding them to
global namespace is pointless.
- A few dozens of lines could be shared with vo_drm (setting up VT
switching, most of code behind page flipping). I don't have any strong
opinion on this.
- Sometimes I get minor visual glitches. I'm not sure if there's a race
condition of some sort, unitialized variable (doubtful), or if it's
buggy driver. (I'm using integrated Intel HD Graphics 4400 with Mesa)
- .config and .control are very minimal.
Signed-off-by: wm4 <wm4@nowhere>
2015-11-07 18:06:57 +00:00
|
|
|
};
|
|
|
|
|
2018-02-13 17:40:47 +00:00
|
|
|
// Not general. Limited to only the formats being used in this module
|
|
|
|
static const char *gbm_format_to_string(uint32_t format)
|
|
|
|
{
|
|
|
|
switch (format) {
|
2018-03-04 10:16:47 +00:00
|
|
|
case GBM_FORMAT_XRGB8888:
|
|
|
|
return "GBM_FORMAT_XRGB8888";
|
|
|
|
case GBM_FORMAT_ARGB8888:
|
|
|
|
return "GBM_FORMAT_ARGB8888";
|
|
|
|
case GBM_FORMAT_XRGB2101010:
|
|
|
|
return "GBM_FORMAT_XRGB2101010";
|
|
|
|
case GBM_FORMAT_ARGB2101010:
|
|
|
|
return "GBM_FORMAT_ARGB2101010";
|
|
|
|
default:
|
|
|
|
return "UNKNOWN";
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
// Allow falling back to an ARGB EGLConfig when we have an XRGB framebuffer.
|
|
|
|
// Also allow falling back to an XRGB EGLConfig for ARGB framebuffers, since
|
|
|
|
// this seems neccessary to work with broken Mali drivers that don't report
|
|
|
|
// their EGLConfigs as supporting alpha properly.
|
|
|
|
static uint32_t fallback_format_for(uint32_t format)
|
|
|
|
{
|
|
|
|
switch (format) {
|
|
|
|
case GBM_FORMAT_XRGB8888:
|
|
|
|
return GBM_FORMAT_ARGB8888;
|
|
|
|
case GBM_FORMAT_ARGB8888:
|
|
|
|
return GBM_FORMAT_XRGB8888;
|
|
|
|
case GBM_FORMAT_XRGB2101010:
|
|
|
|
return GBM_FORMAT_ARGB2101010;
|
|
|
|
case GBM_FORMAT_ARGB2101010:
|
|
|
|
return GBM_FORMAT_XRGB2101010;
|
|
|
|
default:
|
|
|
|
return 0;
|
2018-02-13 17:40:47 +00:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static int match_config_to_visual(void *user_data, EGLConfig *configs, int num_configs)
|
|
|
|
{
|
|
|
|
struct ra_ctx *ctx = (struct ra_ctx*)user_data;
|
|
|
|
struct priv *p = ctx->priv;
|
2018-03-04 10:16:47 +00:00
|
|
|
const EGLint visual_id[] = {
|
|
|
|
(EGLint)p->gbm_format,
|
|
|
|
(EGLint)fallback_format_for(p->gbm_format),
|
|
|
|
0
|
|
|
|
};
|
|
|
|
|
|
|
|
for (unsigned int i = 0; visual_id[i] != 0; ++i) {
|
|
|
|
MP_VERBOSE(ctx, "Attempting to find EGLConfig matching %s\n",
|
|
|
|
gbm_format_to_string(visual_id[i]));
|
|
|
|
for (unsigned int j = 0; j < num_configs; ++j) {
|
|
|
|
EGLint id;
|
|
|
|
|
|
|
|
if (!eglGetConfigAttrib(p->egl.display, configs[j], EGL_NATIVE_VISUAL_ID, &id))
|
|
|
|
continue;
|
|
|
|
|
|
|
|
if (visual_id[i] == id) {
|
|
|
|
MP_VERBOSE(ctx, "Found matching EGLConfig for %s\n",
|
|
|
|
gbm_format_to_string(visual_id[i]));
|
|
|
|
return j;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
MP_VERBOSE(ctx, "No matching EGLConfig for %s\n", gbm_format_to_string(visual_id[i]));
|
2018-02-13 17:40:47 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
MP_ERR(ctx, "Could not find EGLConfig matching the GBM visual (%s).\n",
|
|
|
|
gbm_format_to_string(p->gbm_format));
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
|
2018-08-04 12:03:35 +00:00
|
|
|
static EGLDisplay egl_get_display(struct gbm_device *gbm_device)
|
|
|
|
{
|
|
|
|
const char *ext = eglQueryString(EGL_NO_DISPLAY, EGL_EXTENSIONS);
|
|
|
|
|
|
|
|
if (ext) {
|
|
|
|
PFNEGLGETPLATFORMDISPLAYEXTPROC get_platform_display = NULL;
|
|
|
|
get_platform_display = (void *) eglGetProcAddress("eglGetPlatformDisplayEXT");
|
|
|
|
|
|
|
|
if (get_platform_display && strstr(ext, "EGL_MESA_platform_gbm"))
|
|
|
|
return get_platform_display(EGL_PLATFORM_GBM_MESA, gbm_device, NULL);
|
|
|
|
|
|
|
|
if (get_platform_display && strstr(ext, "EGL_KHR_platform_gbm"))
|
|
|
|
return get_platform_display(EGL_PLATFORM_GBM_KHR, gbm_device, NULL);
|
|
|
|
}
|
|
|
|
|
|
|
|
return eglGetDisplay(gbm_device);
|
|
|
|
}
|
|
|
|
|
vo_opengl: refactor into vo_gpu
This is done in several steps:
1. refactor MPGLContext -> struct ra_ctx
2. move GL-specific stuff in vo_opengl into opengl/context.c
3. generalize context creation to support other APIs, and add --gpu-api
4. rename all of the --opengl- options that are no longer opengl-specific
5. move all of the stuff from opengl/* that isn't GL-specific into gpu/
(note: opengl/gl_utils.h became opengl/utils.h)
6. rename vo_opengl to vo_gpu
7. to handle window screenshots, the short-term approach was to just add
it to ra_swchain_fns. Long term (and for vulkan) this has to be moved to
ra itself (and vo_gpu altered to compensate), but this was a stop-gap
measure to prevent this commit from getting too big
8. move ra->fns->flush to ra_gl_ctx instead
9. some other minor changes that I've probably already forgotten
Note: This is one half of a major refactor, the other half of which is
provided by rossy's following commit. This commit enables support for
all linux platforms, while his version enables support for all non-linux
platforms.
Note 2: vo_opengl_cb.c also re-uses ra_gl_ctx so it benefits from the
--opengl- options like --opengl-early-flush, --opengl-finish etc. Should
be a strict superset of the old functionality.
Disclaimer: Since I have no way of compiling mpv on all platforms, some
of these ports were done blindly. Specifically, the blind ports included
context_mali_fbdev.c and context_rpi.c. Since they're both based on
egl_helpers, the port should have gone smoothly without any major
changes required. But if somebody complains about a compile error on
those platforms (assuming anybody actually uses them), you know where to
complain.
2017-09-14 06:04:55 +00:00
|
|
|
static bool init_egl(struct ra_ctx *ctx)
|
vo_opengl: add DRM EGL backend
Notes:
- Unfortunately the only way to talk to EGL from within DRM I could find
involves linking with GBM (generic buffer management for Mesa.)
Because of this, I'm pretty sure it won't work with proprietary NVidia
drivers, but then again, last time I checked NVidia didn't offer
proper screen resolution for VT.
- VT switching doesn't seem to work at all. It's worth mentioning that
using vo_drm before introduction of VT switcher had an anomaly where
user could switch to another VT and input text to it, while video
played on top of that VT. However, that isn't the case with drm_egl:
I can't switch to other VT during playback like this. This makes me
think that it's either a limitation coming from my firmware or from
EGL/KMS itself rather than a bug with my code. Nonetheless, I still
left (untestable) VT switching code in place, in case it's useful to
someone else.
- The mode_id, connector_id and device_path should be configurable for
power users and people who wish to watch videos on nonprimary screen.
Unfortunately I didn't see anything that would allow OpenGL backends
to register their own set of options. At the same time, adding them to
global namespace is pointless.
- A few dozens of lines could be shared with vo_drm (setting up VT
switching, most of code behind page flipping). I don't have any strong
opinion on this.
- Sometimes I get minor visual glitches. I'm not sure if there's a race
condition of some sort, unitialized variable (doubtful), or if it's
buggy driver. (I'm using integrated Intel HD Graphics 4400 with Mesa)
- .config and .control are very minimal.
Signed-off-by: wm4 <wm4@nowhere>
2015-11-07 18:06:57 +00:00
|
|
|
{
|
|
|
|
struct priv *p = ctx->priv;
|
vo_opengl: refactor into vo_gpu
This is done in several steps:
1. refactor MPGLContext -> struct ra_ctx
2. move GL-specific stuff in vo_opengl into opengl/context.c
3. generalize context creation to support other APIs, and add --gpu-api
4. rename all of the --opengl- options that are no longer opengl-specific
5. move all of the stuff from opengl/* that isn't GL-specific into gpu/
(note: opengl/gl_utils.h became opengl/utils.h)
6. rename vo_opengl to vo_gpu
7. to handle window screenshots, the short-term approach was to just add
it to ra_swchain_fns. Long term (and for vulkan) this has to be moved to
ra itself (and vo_gpu altered to compensate), but this was a stop-gap
measure to prevent this commit from getting too big
8. move ra->fns->flush to ra_gl_ctx instead
9. some other minor changes that I've probably already forgotten
Note: This is one half of a major refactor, the other half of which is
provided by rossy's following commit. This commit enables support for
all linux platforms, while his version enables support for all non-linux
platforms.
Note 2: vo_opengl_cb.c also re-uses ra_gl_ctx so it benefits from the
--opengl- options like --opengl-early-flush, --opengl-finish etc. Should
be a strict superset of the old functionality.
Disclaimer: Since I have no way of compiling mpv on all platforms, some
of these ports were done blindly. Specifically, the blind ports included
context_mali_fbdev.c and context_rpi.c. Since they're both based on
egl_helpers, the port should have gone smoothly without any major
changes required. But if somebody complains about a compile error on
those platforms (assuming anybody actually uses them), you know where to
complain.
2017-09-14 06:04:55 +00:00
|
|
|
MP_VERBOSE(ctx, "Initializing EGL\n");
|
2018-08-04 12:03:35 +00:00
|
|
|
p->egl.display = egl_get_display(p->gbm.device);
|
|
|
|
|
vo_opengl: add DRM EGL backend
Notes:
- Unfortunately the only way to talk to EGL from within DRM I could find
involves linking with GBM (generic buffer management for Mesa.)
Because of this, I'm pretty sure it won't work with proprietary NVidia
drivers, but then again, last time I checked NVidia didn't offer
proper screen resolution for VT.
- VT switching doesn't seem to work at all. It's worth mentioning that
using vo_drm before introduction of VT switcher had an anomaly where
user could switch to another VT and input text to it, while video
played on top of that VT. However, that isn't the case with drm_egl:
I can't switch to other VT during playback like this. This makes me
think that it's either a limitation coming from my firmware or from
EGL/KMS itself rather than a bug with my code. Nonetheless, I still
left (untestable) VT switching code in place, in case it's useful to
someone else.
- The mode_id, connector_id and device_path should be configurable for
power users and people who wish to watch videos on nonprimary screen.
Unfortunately I didn't see anything that would allow OpenGL backends
to register their own set of options. At the same time, adding them to
global namespace is pointless.
- A few dozens of lines could be shared with vo_drm (setting up VT
switching, most of code behind page flipping). I don't have any strong
opinion on this.
- Sometimes I get minor visual glitches. I'm not sure if there's a race
condition of some sort, unitialized variable (doubtful), or if it's
buggy driver. (I'm using integrated Intel HD Graphics 4400 with Mesa)
- .config and .control are very minimal.
Signed-off-by: wm4 <wm4@nowhere>
2015-11-07 18:06:57 +00:00
|
|
|
if (p->egl.display == EGL_NO_DISPLAY) {
|
vo_opengl: refactor into vo_gpu
This is done in several steps:
1. refactor MPGLContext -> struct ra_ctx
2. move GL-specific stuff in vo_opengl into opengl/context.c
3. generalize context creation to support other APIs, and add --gpu-api
4. rename all of the --opengl- options that are no longer opengl-specific
5. move all of the stuff from opengl/* that isn't GL-specific into gpu/
(note: opengl/gl_utils.h became opengl/utils.h)
6. rename vo_opengl to vo_gpu
7. to handle window screenshots, the short-term approach was to just add
it to ra_swchain_fns. Long term (and for vulkan) this has to be moved to
ra itself (and vo_gpu altered to compensate), but this was a stop-gap
measure to prevent this commit from getting too big
8. move ra->fns->flush to ra_gl_ctx instead
9. some other minor changes that I've probably already forgotten
Note: This is one half of a major refactor, the other half of which is
provided by rossy's following commit. This commit enables support for
all linux platforms, while his version enables support for all non-linux
platforms.
Note 2: vo_opengl_cb.c also re-uses ra_gl_ctx so it benefits from the
--opengl- options like --opengl-early-flush, --opengl-finish etc. Should
be a strict superset of the old functionality.
Disclaimer: Since I have no way of compiling mpv on all platforms, some
of these ports were done blindly. Specifically, the blind ports included
context_mali_fbdev.c and context_rpi.c. Since they're both based on
egl_helpers, the port should have gone smoothly without any major
changes required. But if somebody complains about a compile error on
those platforms (assuming anybody actually uses them), you know where to
complain.
2017-09-14 06:04:55 +00:00
|
|
|
MP_ERR(ctx, "Failed to get EGL display.\n");
|
vo_opengl: add DRM EGL backend
Notes:
- Unfortunately the only way to talk to EGL from within DRM I could find
involves linking with GBM (generic buffer management for Mesa.)
Because of this, I'm pretty sure it won't work with proprietary NVidia
drivers, but then again, last time I checked NVidia didn't offer
proper screen resolution for VT.
- VT switching doesn't seem to work at all. It's worth mentioning that
using vo_drm before introduction of VT switcher had an anomaly where
user could switch to another VT and input text to it, while video
played on top of that VT. However, that isn't the case with drm_egl:
I can't switch to other VT during playback like this. This makes me
think that it's either a limitation coming from my firmware or from
EGL/KMS itself rather than a bug with my code. Nonetheless, I still
left (untestable) VT switching code in place, in case it's useful to
someone else.
- The mode_id, connector_id and device_path should be configurable for
power users and people who wish to watch videos on nonprimary screen.
Unfortunately I didn't see anything that would allow OpenGL backends
to register their own set of options. At the same time, adding them to
global namespace is pointless.
- A few dozens of lines could be shared with vo_drm (setting up VT
switching, most of code behind page flipping). I don't have any strong
opinion on this.
- Sometimes I get minor visual glitches. I'm not sure if there's a race
condition of some sort, unitialized variable (doubtful), or if it's
buggy driver. (I'm using integrated Intel HD Graphics 4400 with Mesa)
- .config and .control are very minimal.
Signed-off-by: wm4 <wm4@nowhere>
2015-11-07 18:06:57 +00:00
|
|
|
return false;
|
|
|
|
}
|
|
|
|
if (!eglInitialize(p->egl.display, NULL, NULL)) {
|
vo_opengl: refactor into vo_gpu
This is done in several steps:
1. refactor MPGLContext -> struct ra_ctx
2. move GL-specific stuff in vo_opengl into opengl/context.c
3. generalize context creation to support other APIs, and add --gpu-api
4. rename all of the --opengl- options that are no longer opengl-specific
5. move all of the stuff from opengl/* that isn't GL-specific into gpu/
(note: opengl/gl_utils.h became opengl/utils.h)
6. rename vo_opengl to vo_gpu
7. to handle window screenshots, the short-term approach was to just add
it to ra_swchain_fns. Long term (and for vulkan) this has to be moved to
ra itself (and vo_gpu altered to compensate), but this was a stop-gap
measure to prevent this commit from getting too big
8. move ra->fns->flush to ra_gl_ctx instead
9. some other minor changes that I've probably already forgotten
Note: This is one half of a major refactor, the other half of which is
provided by rossy's following commit. This commit enables support for
all linux platforms, while his version enables support for all non-linux
platforms.
Note 2: vo_opengl_cb.c also re-uses ra_gl_ctx so it benefits from the
--opengl- options like --opengl-early-flush, --opengl-finish etc. Should
be a strict superset of the old functionality.
Disclaimer: Since I have no way of compiling mpv on all platforms, some
of these ports were done blindly. Specifically, the blind ports included
context_mali_fbdev.c and context_rpi.c. Since they're both based on
egl_helpers, the port should have gone smoothly without any major
changes required. But if somebody complains about a compile error on
those platforms (assuming anybody actually uses them), you know where to
complain.
2017-09-14 06:04:55 +00:00
|
|
|
MP_ERR(ctx, "Failed to initialize EGL.\n");
|
vo_opengl: add DRM EGL backend
Notes:
- Unfortunately the only way to talk to EGL from within DRM I could find
involves linking with GBM (generic buffer management for Mesa.)
Because of this, I'm pretty sure it won't work with proprietary NVidia
drivers, but then again, last time I checked NVidia didn't offer
proper screen resolution for VT.
- VT switching doesn't seem to work at all. It's worth mentioning that
using vo_drm before introduction of VT switcher had an anomaly where
user could switch to another VT and input text to it, while video
played on top of that VT. However, that isn't the case with drm_egl:
I can't switch to other VT during playback like this. This makes me
think that it's either a limitation coming from my firmware or from
EGL/KMS itself rather than a bug with my code. Nonetheless, I still
left (untestable) VT switching code in place, in case it's useful to
someone else.
- The mode_id, connector_id and device_path should be configurable for
power users and people who wish to watch videos on nonprimary screen.
Unfortunately I didn't see anything that would allow OpenGL backends
to register their own set of options. At the same time, adding them to
global namespace is pointless.
- A few dozens of lines could be shared with vo_drm (setting up VT
switching, most of code behind page flipping). I don't have any strong
opinion on this.
- Sometimes I get minor visual glitches. I'm not sure if there's a race
condition of some sort, unitialized variable (doubtful), or if it's
buggy driver. (I'm using integrated Intel HD Graphics 4400 with Mesa)
- .config and .control are very minimal.
Signed-off-by: wm4 <wm4@nowhere>
2015-11-07 18:06:57 +00:00
|
|
|
return false;
|
|
|
|
}
|
2016-09-14 08:58:55 +00:00
|
|
|
EGLConfig config;
|
2018-02-13 17:40:47 +00:00
|
|
|
if (!mpegl_create_context_cb(ctx,
|
|
|
|
p->egl.display,
|
|
|
|
(struct mpegl_cb){match_config_to_visual, ctx},
|
|
|
|
&p->egl.context,
|
|
|
|
&config))
|
vo_opengl: refactor into vo_gpu
This is done in several steps:
1. refactor MPGLContext -> struct ra_ctx
2. move GL-specific stuff in vo_opengl into opengl/context.c
3. generalize context creation to support other APIs, and add --gpu-api
4. rename all of the --opengl- options that are no longer opengl-specific
5. move all of the stuff from opengl/* that isn't GL-specific into gpu/
(note: opengl/gl_utils.h became opengl/utils.h)
6. rename vo_opengl to vo_gpu
7. to handle window screenshots, the short-term approach was to just add
it to ra_swchain_fns. Long term (and for vulkan) this has to be moved to
ra itself (and vo_gpu altered to compensate), but this was a stop-gap
measure to prevent this commit from getting too big
8. move ra->fns->flush to ra_gl_ctx instead
9. some other minor changes that I've probably already forgotten
Note: This is one half of a major refactor, the other half of which is
provided by rossy's following commit. This commit enables support for
all linux platforms, while his version enables support for all non-linux
platforms.
Note 2: vo_opengl_cb.c also re-uses ra_gl_ctx so it benefits from the
--opengl- options like --opengl-early-flush, --opengl-finish etc. Should
be a strict superset of the old functionality.
Disclaimer: Since I have no way of compiling mpv on all platforms, some
of these ports were done blindly. Specifically, the blind ports included
context_mali_fbdev.c and context_rpi.c. Since they're both based on
egl_helpers, the port should have gone smoothly without any major
changes required. But if somebody complains about a compile error on
those platforms (assuming anybody actually uses them), you know where to
complain.
2017-09-14 06:04:55 +00:00
|
|
|
return false;
|
|
|
|
MP_VERBOSE(ctx, "Initializing EGL surface\n");
|
2016-10-04 20:07:19 +00:00
|
|
|
p->egl.surface
|
|
|
|
= eglCreateWindowSurface(p->egl.display, config, p->gbm.surface, NULL);
|
vo_opengl: add DRM EGL backend
Notes:
- Unfortunately the only way to talk to EGL from within DRM I could find
involves linking with GBM (generic buffer management for Mesa.)
Because of this, I'm pretty sure it won't work with proprietary NVidia
drivers, but then again, last time I checked NVidia didn't offer
proper screen resolution for VT.
- VT switching doesn't seem to work at all. It's worth mentioning that
using vo_drm before introduction of VT switcher had an anomaly where
user could switch to another VT and input text to it, while video
played on top of that VT. However, that isn't the case with drm_egl:
I can't switch to other VT during playback like this. This makes me
think that it's either a limitation coming from my firmware or from
EGL/KMS itself rather than a bug with my code. Nonetheless, I still
left (untestable) VT switching code in place, in case it's useful to
someone else.
- The mode_id, connector_id and device_path should be configurable for
power users and people who wish to watch videos on nonprimary screen.
Unfortunately I didn't see anything that would allow OpenGL backends
to register their own set of options. At the same time, adding them to
global namespace is pointless.
- A few dozens of lines could be shared with vo_drm (setting up VT
switching, most of code behind page flipping). I don't have any strong
opinion on this.
- Sometimes I get minor visual glitches. I'm not sure if there's a race
condition of some sort, unitialized variable (doubtful), or if it's
buggy driver. (I'm using integrated Intel HD Graphics 4400 with Mesa)
- .config and .control are very minimal.
Signed-off-by: wm4 <wm4@nowhere>
2015-11-07 18:06:57 +00:00
|
|
|
if (p->egl.surface == EGL_NO_SURFACE) {
|
vo_opengl: refactor into vo_gpu
This is done in several steps:
1. refactor MPGLContext -> struct ra_ctx
2. move GL-specific stuff in vo_opengl into opengl/context.c
3. generalize context creation to support other APIs, and add --gpu-api
4. rename all of the --opengl- options that are no longer opengl-specific
5. move all of the stuff from opengl/* that isn't GL-specific into gpu/
(note: opengl/gl_utils.h became opengl/utils.h)
6. rename vo_opengl to vo_gpu
7. to handle window screenshots, the short-term approach was to just add
it to ra_swchain_fns. Long term (and for vulkan) this has to be moved to
ra itself (and vo_gpu altered to compensate), but this was a stop-gap
measure to prevent this commit from getting too big
8. move ra->fns->flush to ra_gl_ctx instead
9. some other minor changes that I've probably already forgotten
Note: This is one half of a major refactor, the other half of which is
provided by rossy's following commit. This commit enables support for
all linux platforms, while his version enables support for all non-linux
platforms.
Note 2: vo_opengl_cb.c also re-uses ra_gl_ctx so it benefits from the
--opengl- options like --opengl-early-flush, --opengl-finish etc. Should
be a strict superset of the old functionality.
Disclaimer: Since I have no way of compiling mpv on all platforms, some
of these ports were done blindly. Specifically, the blind ports included
context_mali_fbdev.c and context_rpi.c. Since they're both based on
egl_helpers, the port should have gone smoothly without any major
changes required. But if somebody complains about a compile error on
those platforms (assuming anybody actually uses them), you know where to
complain.
2017-09-14 06:04:55 +00:00
|
|
|
MP_ERR(ctx, "Failed to create EGL surface.\n");
|
vo_opengl: add DRM EGL backend
Notes:
- Unfortunately the only way to talk to EGL from within DRM I could find
involves linking with GBM (generic buffer management for Mesa.)
Because of this, I'm pretty sure it won't work with proprietary NVidia
drivers, but then again, last time I checked NVidia didn't offer
proper screen resolution for VT.
- VT switching doesn't seem to work at all. It's worth mentioning that
using vo_drm before introduction of VT switcher had an anomaly where
user could switch to another VT and input text to it, while video
played on top of that VT. However, that isn't the case with drm_egl:
I can't switch to other VT during playback like this. This makes me
think that it's either a limitation coming from my firmware or from
EGL/KMS itself rather than a bug with my code. Nonetheless, I still
left (untestable) VT switching code in place, in case it's useful to
someone else.
- The mode_id, connector_id and device_path should be configurable for
power users and people who wish to watch videos on nonprimary screen.
Unfortunately I didn't see anything that would allow OpenGL backends
to register their own set of options. At the same time, adding them to
global namespace is pointless.
- A few dozens of lines could be shared with vo_drm (setting up VT
switching, most of code behind page flipping). I don't have any strong
opinion on this.
- Sometimes I get minor visual glitches. I'm not sure if there's a race
condition of some sort, unitialized variable (doubtful), or if it's
buggy driver. (I'm using integrated Intel HD Graphics 4400 with Mesa)
- .config and .control are very minimal.
Signed-off-by: wm4 <wm4@nowhere>
2015-11-07 18:06:57 +00:00
|
|
|
return false;
|
|
|
|
}
|
|
|
|
return true;
|
|
|
|
}
|
|
|
|
|
vo_opengl: refactor into vo_gpu
This is done in several steps:
1. refactor MPGLContext -> struct ra_ctx
2. move GL-specific stuff in vo_opengl into opengl/context.c
3. generalize context creation to support other APIs, and add --gpu-api
4. rename all of the --opengl- options that are no longer opengl-specific
5. move all of the stuff from opengl/* that isn't GL-specific into gpu/
(note: opengl/gl_utils.h became opengl/utils.h)
6. rename vo_opengl to vo_gpu
7. to handle window screenshots, the short-term approach was to just add
it to ra_swchain_fns. Long term (and for vulkan) this has to be moved to
ra itself (and vo_gpu altered to compensate), but this was a stop-gap
measure to prevent this commit from getting too big
8. move ra->fns->flush to ra_gl_ctx instead
9. some other minor changes that I've probably already forgotten
Note: This is one half of a major refactor, the other half of which is
provided by rossy's following commit. This commit enables support for
all linux platforms, while his version enables support for all non-linux
platforms.
Note 2: vo_opengl_cb.c also re-uses ra_gl_ctx so it benefits from the
--opengl- options like --opengl-early-flush, --opengl-finish etc. Should
be a strict superset of the old functionality.
Disclaimer: Since I have no way of compiling mpv on all platforms, some
of these ports were done blindly. Specifically, the blind ports included
context_mali_fbdev.c and context_rpi.c. Since they're both based on
egl_helpers, the port should have gone smoothly without any major
changes required. But if somebody complains about a compile error on
those platforms (assuming anybody actually uses them), you know where to
complain.
2017-09-14 06:04:55 +00:00
|
|
|
static bool init_gbm(struct ra_ctx *ctx)
|
vo_opengl: add DRM EGL backend
Notes:
- Unfortunately the only way to talk to EGL from within DRM I could find
involves linking with GBM (generic buffer management for Mesa.)
Because of this, I'm pretty sure it won't work with proprietary NVidia
drivers, but then again, last time I checked NVidia didn't offer
proper screen resolution for VT.
- VT switching doesn't seem to work at all. It's worth mentioning that
using vo_drm before introduction of VT switcher had an anomaly where
user could switch to another VT and input text to it, while video
played on top of that VT. However, that isn't the case with drm_egl:
I can't switch to other VT during playback like this. This makes me
think that it's either a limitation coming from my firmware or from
EGL/KMS itself rather than a bug with my code. Nonetheless, I still
left (untestable) VT switching code in place, in case it's useful to
someone else.
- The mode_id, connector_id and device_path should be configurable for
power users and people who wish to watch videos on nonprimary screen.
Unfortunately I didn't see anything that would allow OpenGL backends
to register their own set of options. At the same time, adding them to
global namespace is pointless.
- A few dozens of lines could be shared with vo_drm (setting up VT
switching, most of code behind page flipping). I don't have any strong
opinion on this.
- Sometimes I get minor visual glitches. I'm not sure if there's a race
condition of some sort, unitialized variable (doubtful), or if it's
buggy driver. (I'm using integrated Intel HD Graphics 4400 with Mesa)
- .config and .control are very minimal.
Signed-off-by: wm4 <wm4@nowhere>
2015-11-07 18:06:57 +00:00
|
|
|
{
|
|
|
|
struct priv *p = ctx->priv;
|
|
|
|
MP_VERBOSE(ctx->vo, "Creating GBM device\n");
|
|
|
|
p->gbm.device = gbm_create_device(p->kms->fd);
|
|
|
|
if (!p->gbm.device) {
|
|
|
|
MP_ERR(ctx->vo, "Failed to create GBM device.\n");
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
|
|
|
|
MP_VERBOSE(ctx->vo, "Initializing GBM surface (%d x %d)\n",
|
2018-12-01 11:01:17 +00:00
|
|
|
p->draw_surface_size.width, p->draw_surface_size.height);
|
vo_opengl: add DRM EGL backend
Notes:
- Unfortunately the only way to talk to EGL from within DRM I could find
involves linking with GBM (generic buffer management for Mesa.)
Because of this, I'm pretty sure it won't work with proprietary NVidia
drivers, but then again, last time I checked NVidia didn't offer
proper screen resolution for VT.
- VT switching doesn't seem to work at all. It's worth mentioning that
using vo_drm before introduction of VT switcher had an anomaly where
user could switch to another VT and input text to it, while video
played on top of that VT. However, that isn't the case with drm_egl:
I can't switch to other VT during playback like this. This makes me
think that it's either a limitation coming from my firmware or from
EGL/KMS itself rather than a bug with my code. Nonetheless, I still
left (untestable) VT switching code in place, in case it's useful to
someone else.
- The mode_id, connector_id and device_path should be configurable for
power users and people who wish to watch videos on nonprimary screen.
Unfortunately I didn't see anything that would allow OpenGL backends
to register their own set of options. At the same time, adding them to
global namespace is pointless.
- A few dozens of lines could be shared with vo_drm (setting up VT
switching, most of code behind page flipping). I don't have any strong
opinion on this.
- Sometimes I get minor visual glitches. I'm not sure if there's a race
condition of some sort, unitialized variable (doubtful), or if it's
buggy driver. (I'm using integrated Intel HD Graphics 4400 with Mesa)
- .config and .control are very minimal.
Signed-off-by: wm4 <wm4@nowhere>
2015-11-07 18:06:57 +00:00
|
|
|
p->gbm.surface = gbm_surface_create(
|
|
|
|
p->gbm.device,
|
2018-12-01 11:01:17 +00:00
|
|
|
p->draw_surface_size.width,
|
|
|
|
p->draw_surface_size.height,
|
2018-02-13 17:40:47 +00:00
|
|
|
p->gbm_format,
|
vo_opengl: add DRM EGL backend
Notes:
- Unfortunately the only way to talk to EGL from within DRM I could find
involves linking with GBM (generic buffer management for Mesa.)
Because of this, I'm pretty sure it won't work with proprietary NVidia
drivers, but then again, last time I checked NVidia didn't offer
proper screen resolution for VT.
- VT switching doesn't seem to work at all. It's worth mentioning that
using vo_drm before introduction of VT switcher had an anomaly where
user could switch to another VT and input text to it, while video
played on top of that VT. However, that isn't the case with drm_egl:
I can't switch to other VT during playback like this. This makes me
think that it's either a limitation coming from my firmware or from
EGL/KMS itself rather than a bug with my code. Nonetheless, I still
left (untestable) VT switching code in place, in case it's useful to
someone else.
- The mode_id, connector_id and device_path should be configurable for
power users and people who wish to watch videos on nonprimary screen.
Unfortunately I didn't see anything that would allow OpenGL backends
to register their own set of options. At the same time, adding them to
global namespace is pointless.
- A few dozens of lines could be shared with vo_drm (setting up VT
switching, most of code behind page flipping). I don't have any strong
opinion on this.
- Sometimes I get minor visual glitches. I'm not sure if there's a race
condition of some sort, unitialized variable (doubtful), or if it's
buggy driver. (I'm using integrated Intel HD Graphics 4400 with Mesa)
- .config and .control are very minimal.
Signed-off-by: wm4 <wm4@nowhere>
2015-11-07 18:06:57 +00:00
|
|
|
GBM_BO_USE_SCANOUT | GBM_BO_USE_RENDERING);
|
|
|
|
if (!p->gbm.surface) {
|
|
|
|
MP_ERR(ctx->vo, "Failed to create GBM surface.\n");
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
return true;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void framebuffer_destroy_callback(struct gbm_bo *bo, void *data)
|
|
|
|
{
|
|
|
|
struct framebuffer *fb = data;
|
|
|
|
if (fb) {
|
|
|
|
drmModeRmFB(fb->fd, fb->id);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2017-10-05 21:44:54 +00:00
|
|
|
static void update_framebuffer_from_bo(struct ra_ctx *ctx, struct gbm_bo *bo)
|
vo_opengl: add DRM EGL backend
Notes:
- Unfortunately the only way to talk to EGL from within DRM I could find
involves linking with GBM (generic buffer management for Mesa.)
Because of this, I'm pretty sure it won't work with proprietary NVidia
drivers, but then again, last time I checked NVidia didn't offer
proper screen resolution for VT.
- VT switching doesn't seem to work at all. It's worth mentioning that
using vo_drm before introduction of VT switcher had an anomaly where
user could switch to another VT and input text to it, while video
played on top of that VT. However, that isn't the case with drm_egl:
I can't switch to other VT during playback like this. This makes me
think that it's either a limitation coming from my firmware or from
EGL/KMS itself rather than a bug with my code. Nonetheless, I still
left (untestable) VT switching code in place, in case it's useful to
someone else.
- The mode_id, connector_id and device_path should be configurable for
power users and people who wish to watch videos on nonprimary screen.
Unfortunately I didn't see anything that would allow OpenGL backends
to register their own set of options. At the same time, adding them to
global namespace is pointless.
- A few dozens of lines could be shared with vo_drm (setting up VT
switching, most of code behind page flipping). I don't have any strong
opinion on this.
- Sometimes I get minor visual glitches. I'm not sure if there's a race
condition of some sort, unitialized variable (doubtful), or if it's
buggy driver. (I'm using integrated Intel HD Graphics 4400 with Mesa)
- .config and .control are very minimal.
Signed-off-by: wm4 <wm4@nowhere>
2015-11-07 18:06:57 +00:00
|
|
|
{
|
|
|
|
struct priv *p = ctx->priv;
|
2017-10-05 21:44:54 +00:00
|
|
|
struct framebuffer *fb = gbm_bo_get_user_data(bo);
|
|
|
|
if (fb) {
|
|
|
|
p->fb = fb;
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
fb = talloc_zero(ctx, struct framebuffer);
|
|
|
|
fb->fd = p->kms->fd;
|
|
|
|
fb->width = gbm_bo_get_width(bo);
|
|
|
|
fb->height = gbm_bo_get_height(bo);
|
|
|
|
uint32_t stride = gbm_bo_get_stride(bo);
|
|
|
|
uint32_t handle = gbm_bo_get_handle(bo).u32;
|
|
|
|
|
2017-11-09 08:54:28 +00:00
|
|
|
int ret = drmModeAddFB2(fb->fd, fb->width, fb->height,
|
2018-02-13 17:40:47 +00:00
|
|
|
p->gbm_format,
|
2017-11-09 08:54:28 +00:00
|
|
|
(uint32_t[4]){handle, 0, 0, 0},
|
|
|
|
(uint32_t[4]){stride, 0, 0, 0},
|
|
|
|
(uint32_t[4]){0, 0, 0, 0},
|
|
|
|
&fb->id, 0);
|
|
|
|
|
vo_opengl: add DRM EGL backend
Notes:
- Unfortunately the only way to talk to EGL from within DRM I could find
involves linking with GBM (generic buffer management for Mesa.)
Because of this, I'm pretty sure it won't work with proprietary NVidia
drivers, but then again, last time I checked NVidia didn't offer
proper screen resolution for VT.
- VT switching doesn't seem to work at all. It's worth mentioning that
using vo_drm before introduction of VT switcher had an anomaly where
user could switch to another VT and input text to it, while video
played on top of that VT. However, that isn't the case with drm_egl:
I can't switch to other VT during playback like this. This makes me
think that it's either a limitation coming from my firmware or from
EGL/KMS itself rather than a bug with my code. Nonetheless, I still
left (untestable) VT switching code in place, in case it's useful to
someone else.
- The mode_id, connector_id and device_path should be configurable for
power users and people who wish to watch videos on nonprimary screen.
Unfortunately I didn't see anything that would allow OpenGL backends
to register their own set of options. At the same time, adding them to
global namespace is pointless.
- A few dozens of lines could be shared with vo_drm (setting up VT
switching, most of code behind page flipping). I don't have any strong
opinion on this.
- Sometimes I get minor visual glitches. I'm not sure if there's a race
condition of some sort, unitialized variable (doubtful), or if it's
buggy driver. (I'm using integrated Intel HD Graphics 4400 with Mesa)
- .config and .control are very minimal.
Signed-off-by: wm4 <wm4@nowhere>
2015-11-07 18:06:57 +00:00
|
|
|
if (ret) {
|
|
|
|
MP_ERR(ctx->vo, "Failed to create framebuffer: %s\n", mp_strerror(errno));
|
|
|
|
}
|
2017-10-05 21:44:54 +00:00
|
|
|
gbm_bo_set_user_data(bo, fb, framebuffer_destroy_callback);
|
|
|
|
p->fb = fb;
|
vo_opengl: add DRM EGL backend
Notes:
- Unfortunately the only way to talk to EGL from within DRM I could find
involves linking with GBM (generic buffer management for Mesa.)
Because of this, I'm pretty sure it won't work with proprietary NVidia
drivers, but then again, last time I checked NVidia didn't offer
proper screen resolution for VT.
- VT switching doesn't seem to work at all. It's worth mentioning that
using vo_drm before introduction of VT switcher had an anomaly where
user could switch to another VT and input text to it, while video
played on top of that VT. However, that isn't the case with drm_egl:
I can't switch to other VT during playback like this. This makes me
think that it's either a limitation coming from my firmware or from
EGL/KMS itself rather than a bug with my code. Nonetheless, I still
left (untestable) VT switching code in place, in case it's useful to
someone else.
- The mode_id, connector_id and device_path should be configurable for
power users and people who wish to watch videos on nonprimary screen.
Unfortunately I didn't see anything that would allow OpenGL backends
to register their own set of options. At the same time, adding them to
global namespace is pointless.
- A few dozens of lines could be shared with vo_drm (setting up VT
switching, most of code behind page flipping). I don't have any strong
opinion on this.
- Sometimes I get minor visual glitches. I'm not sure if there's a race
condition of some sort, unitialized variable (doubtful), or if it's
buggy driver. (I'm using integrated Intel HD Graphics 4400 with Mesa)
- .config and .control are very minimal.
Signed-off-by: wm4 <wm4@nowhere>
2015-11-07 18:06:57 +00:00
|
|
|
}
|
|
|
|
|
2018-04-21 13:16:12 +00:00
|
|
|
static bool crtc_setup_atomic(struct ra_ctx *ctx)
|
2018-04-07 06:56:59 +00:00
|
|
|
{
|
|
|
|
struct priv *p = ctx->priv;
|
|
|
|
struct drm_atomic_context *atomic_ctx = p->kms->atomic_context;
|
2018-04-21 13:16:12 +00:00
|
|
|
|
2018-06-02 10:53:54 +00:00
|
|
|
if (!drm_atomic_save_old_state(atomic_ctx)) {
|
|
|
|
MP_WARN(ctx->vo, "Failed to save old DRM atomic state\n");
|
|
|
|
}
|
|
|
|
|
2018-04-07 06:56:59 +00:00
|
|
|
drmModeAtomicReqPtr request = drmModeAtomicAlloc();
|
2018-06-02 10:53:47 +00:00
|
|
|
if (!request) {
|
|
|
|
MP_ERR(ctx->vo, "Failed to allocate drm atomic request\n");
|
|
|
|
return false;
|
|
|
|
}
|
2018-04-07 06:56:59 +00:00
|
|
|
|
2018-06-02 10:53:47 +00:00
|
|
|
if (drm_object_set_property(request, atomic_ctx->connector, "CRTC_ID", p->kms->crtc_id) < 0) {
|
|
|
|
MP_ERR(ctx->vo, "Could not set CRTC_ID on connector\n");
|
|
|
|
return false;
|
|
|
|
}
|
2018-04-07 06:56:59 +00:00
|
|
|
|
2018-06-02 10:53:54 +00:00
|
|
|
if (!drm_mode_ensure_blob(p->kms->fd, &p->kms->mode)) {
|
2018-06-02 10:53:47 +00:00
|
|
|
MP_ERR(ctx->vo, "Failed to create DRM mode blob\n");
|
|
|
|
goto err;
|
|
|
|
}
|
2018-06-02 10:53:54 +00:00
|
|
|
if (drm_object_set_property(request, atomic_ctx->crtc, "MODE_ID", p->kms->mode.blob_id) < 0) {
|
2018-06-02 10:53:47 +00:00
|
|
|
MP_ERR(ctx->vo, "Could not set MODE_ID on crtc\n");
|
|
|
|
goto err;
|
|
|
|
}
|
|
|
|
if (drm_object_set_property(request, atomic_ctx->crtc, "ACTIVE", 1) < 0) {
|
|
|
|
MP_ERR(ctx->vo, "Could not set ACTIVE on crtc\n");
|
|
|
|
goto err;
|
2018-04-07 06:56:59 +00:00
|
|
|
}
|
|
|
|
|
2018-12-01 11:01:17 +00:00
|
|
|
drm_object_set_property(request, atomic_ctx->draw_plane, "FB_ID", p->fb->id);
|
|
|
|
drm_object_set_property(request, atomic_ctx->draw_plane, "CRTC_ID", p->kms->crtc_id);
|
|
|
|
drm_object_set_property(request, atomic_ctx->draw_plane, "SRC_X", 0);
|
|
|
|
drm_object_set_property(request, atomic_ctx->draw_plane, "SRC_Y", 0);
|
|
|
|
drm_object_set_property(request, atomic_ctx->draw_plane, "SRC_W", p->draw_surface_size.width << 16);
|
|
|
|
drm_object_set_property(request, atomic_ctx->draw_plane, "SRC_H", p->draw_surface_size.height << 16);
|
|
|
|
drm_object_set_property(request, atomic_ctx->draw_plane, "CRTC_X", 0);
|
|
|
|
drm_object_set_property(request, atomic_ctx->draw_plane, "CRTC_Y", 0);
|
|
|
|
drm_object_set_property(request, atomic_ctx->draw_plane, "CRTC_W", p->kms->mode.mode.hdisplay);
|
|
|
|
drm_object_set_property(request, atomic_ctx->draw_plane, "CRTC_H", p->kms->mode.mode.vdisplay);
|
2018-06-02 10:53:47 +00:00
|
|
|
|
|
|
|
int ret = drmModeAtomicCommit(p->kms->fd, request, DRM_MODE_ATOMIC_ALLOW_MODESET, NULL);
|
|
|
|
if (ret)
|
|
|
|
MP_ERR(ctx->vo, "Failed to commit ModeSetting atomic request (%d)\n", ret);
|
|
|
|
|
|
|
|
drmModeAtomicFree(request);
|
|
|
|
return ret == 0;
|
|
|
|
|
|
|
|
err:
|
|
|
|
drmModeAtomicFree(request);
|
2018-04-07 06:56:59 +00:00
|
|
|
return false;
|
|
|
|
}
|
|
|
|
|
|
|
|
static bool crtc_release_atomic(struct ra_ctx *ctx)
|
|
|
|
{
|
|
|
|
struct priv *p = ctx->priv;
|
|
|
|
|
|
|
|
struct drm_atomic_context *atomic_ctx = p->kms->atomic_context;
|
|
|
|
drmModeAtomicReqPtr request = drmModeAtomicAlloc();
|
2018-06-02 10:53:47 +00:00
|
|
|
if (!request) {
|
|
|
|
MP_ERR(ctx->vo, "Failed to allocate drm atomic request\n");
|
|
|
|
return false;
|
|
|
|
}
|
2018-04-07 06:56:59 +00:00
|
|
|
|
2018-06-02 10:53:54 +00:00
|
|
|
if (!drm_atomic_restore_old_state(request, atomic_ctx)) {
|
|
|
|
MP_WARN(ctx->vo, "Got error while restoring old state\n");
|
2018-06-02 10:53:47 +00:00
|
|
|
}
|
2018-04-07 06:56:59 +00:00
|
|
|
|
2018-06-02 10:53:47 +00:00
|
|
|
int ret = drmModeAtomicCommit(p->kms->fd, request, DRM_MODE_ATOMIC_ALLOW_MODESET, NULL);
|
2018-04-07 06:56:59 +00:00
|
|
|
|
2018-06-02 10:53:47 +00:00
|
|
|
if (ret)
|
|
|
|
MP_WARN(ctx->vo, "Failed to commit ModeSetting atomic request (%d)\n", ret);
|
2018-04-07 06:56:59 +00:00
|
|
|
|
2018-06-02 10:53:47 +00:00
|
|
|
drmModeAtomicFree(request);
|
|
|
|
return ret == 0;
|
2018-04-07 06:56:59 +00:00
|
|
|
}
|
|
|
|
|
vo_opengl: refactor into vo_gpu
This is done in several steps:
1. refactor MPGLContext -> struct ra_ctx
2. move GL-specific stuff in vo_opengl into opengl/context.c
3. generalize context creation to support other APIs, and add --gpu-api
4. rename all of the --opengl- options that are no longer opengl-specific
5. move all of the stuff from opengl/* that isn't GL-specific into gpu/
(note: opengl/gl_utils.h became opengl/utils.h)
6. rename vo_opengl to vo_gpu
7. to handle window screenshots, the short-term approach was to just add
it to ra_swchain_fns. Long term (and for vulkan) this has to be moved to
ra itself (and vo_gpu altered to compensate), but this was a stop-gap
measure to prevent this commit from getting too big
8. move ra->fns->flush to ra_gl_ctx instead
9. some other minor changes that I've probably already forgotten
Note: This is one half of a major refactor, the other half of which is
provided by rossy's following commit. This commit enables support for
all linux platforms, while his version enables support for all non-linux
platforms.
Note 2: vo_opengl_cb.c also re-uses ra_gl_ctx so it benefits from the
--opengl- options like --opengl-early-flush, --opengl-finish etc. Should
be a strict superset of the old functionality.
Disclaimer: Since I have no way of compiling mpv on all platforms, some
of these ports were done blindly. Specifically, the blind ports included
context_mali_fbdev.c and context_rpi.c. Since they're both based on
egl_helpers, the port should have gone smoothly without any major
changes required. But if somebody complains about a compile error on
those platforms (assuming anybody actually uses them), you know where to
complain.
2017-09-14 06:04:55 +00:00
|
|
|
static bool crtc_setup(struct ra_ctx *ctx)
|
vo_opengl: add DRM EGL backend
Notes:
- Unfortunately the only way to talk to EGL from within DRM I could find
involves linking with GBM (generic buffer management for Mesa.)
Because of this, I'm pretty sure it won't work with proprietary NVidia
drivers, but then again, last time I checked NVidia didn't offer
proper screen resolution for VT.
- VT switching doesn't seem to work at all. It's worth mentioning that
using vo_drm before introduction of VT switcher had an anomaly where
user could switch to another VT and input text to it, while video
played on top of that VT. However, that isn't the case with drm_egl:
I can't switch to other VT during playback like this. This makes me
think that it's either a limitation coming from my firmware or from
EGL/KMS itself rather than a bug with my code. Nonetheless, I still
left (untestable) VT switching code in place, in case it's useful to
someone else.
- The mode_id, connector_id and device_path should be configurable for
power users and people who wish to watch videos on nonprimary screen.
Unfortunately I didn't see anything that would allow OpenGL backends
to register their own set of options. At the same time, adding them to
global namespace is pointless.
- A few dozens of lines could be shared with vo_drm (setting up VT
switching, most of code behind page flipping). I don't have any strong
opinion on this.
- Sometimes I get minor visual glitches. I'm not sure if there's a race
condition of some sort, unitialized variable (doubtful), or if it's
buggy driver. (I'm using integrated Intel HD Graphics 4400 with Mesa)
- .config and .control are very minimal.
Signed-off-by: wm4 <wm4@nowhere>
2015-11-07 18:06:57 +00:00
|
|
|
{
|
|
|
|
struct priv *p = ctx->priv;
|
|
|
|
if (p->active)
|
|
|
|
return true;
|
2018-04-07 06:56:59 +00:00
|
|
|
|
|
|
|
if (p->kms->atomic_context) {
|
2018-04-21 13:16:12 +00:00
|
|
|
int ret = crtc_setup_atomic(ctx);
|
2018-04-07 06:56:59 +00:00
|
|
|
p->active = true;
|
|
|
|
return ret;
|
|
|
|
} else {
|
2018-06-02 10:53:54 +00:00
|
|
|
p->old_crtc = drmModeGetCrtc(p->kms->fd, p->kms->crtc_id);
|
2018-04-07 06:56:59 +00:00
|
|
|
int ret = drmModeSetCrtc(p->kms->fd, p->kms->crtc_id, p->fb->id,
|
|
|
|
0, 0, &p->kms->connector->connector_id, 1,
|
2018-06-02 10:53:54 +00:00
|
|
|
&p->kms->mode.mode);
|
2018-04-07 06:56:59 +00:00
|
|
|
p->active = true;
|
|
|
|
return ret == 0;
|
|
|
|
}
|
vo_opengl: add DRM EGL backend
Notes:
- Unfortunately the only way to talk to EGL from within DRM I could find
involves linking with GBM (generic buffer management for Mesa.)
Because of this, I'm pretty sure it won't work with proprietary NVidia
drivers, but then again, last time I checked NVidia didn't offer
proper screen resolution for VT.
- VT switching doesn't seem to work at all. It's worth mentioning that
using vo_drm before introduction of VT switcher had an anomaly where
user could switch to another VT and input text to it, while video
played on top of that VT. However, that isn't the case with drm_egl:
I can't switch to other VT during playback like this. This makes me
think that it's either a limitation coming from my firmware or from
EGL/KMS itself rather than a bug with my code. Nonetheless, I still
left (untestable) VT switching code in place, in case it's useful to
someone else.
- The mode_id, connector_id and device_path should be configurable for
power users and people who wish to watch videos on nonprimary screen.
Unfortunately I didn't see anything that would allow OpenGL backends
to register their own set of options. At the same time, adding them to
global namespace is pointless.
- A few dozens of lines could be shared with vo_drm (setting up VT
switching, most of code behind page flipping). I don't have any strong
opinion on this.
- Sometimes I get minor visual glitches. I'm not sure if there's a race
condition of some sort, unitialized variable (doubtful), or if it's
buggy driver. (I'm using integrated Intel HD Graphics 4400 with Mesa)
- .config and .control are very minimal.
Signed-off-by: wm4 <wm4@nowhere>
2015-11-07 18:06:57 +00:00
|
|
|
}
|
|
|
|
|
vo_opengl: refactor into vo_gpu
This is done in several steps:
1. refactor MPGLContext -> struct ra_ctx
2. move GL-specific stuff in vo_opengl into opengl/context.c
3. generalize context creation to support other APIs, and add --gpu-api
4. rename all of the --opengl- options that are no longer opengl-specific
5. move all of the stuff from opengl/* that isn't GL-specific into gpu/
(note: opengl/gl_utils.h became opengl/utils.h)
6. rename vo_opengl to vo_gpu
7. to handle window screenshots, the short-term approach was to just add
it to ra_swchain_fns. Long term (and for vulkan) this has to be moved to
ra itself (and vo_gpu altered to compensate), but this was a stop-gap
measure to prevent this commit from getting too big
8. move ra->fns->flush to ra_gl_ctx instead
9. some other minor changes that I've probably already forgotten
Note: This is one half of a major refactor, the other half of which is
provided by rossy's following commit. This commit enables support for
all linux platforms, while his version enables support for all non-linux
platforms.
Note 2: vo_opengl_cb.c also re-uses ra_gl_ctx so it benefits from the
--opengl- options like --opengl-early-flush, --opengl-finish etc. Should
be a strict superset of the old functionality.
Disclaimer: Since I have no way of compiling mpv on all platforms, some
of these ports were done blindly. Specifically, the blind ports included
context_mali_fbdev.c and context_rpi.c. Since they're both based on
egl_helpers, the port should have gone smoothly without any major
changes required. But if somebody complains about a compile error on
those platforms (assuming anybody actually uses them), you know where to
complain.
2017-09-14 06:04:55 +00:00
|
|
|
static void crtc_release(struct ra_ctx *ctx)
|
vo_opengl: add DRM EGL backend
Notes:
- Unfortunately the only way to talk to EGL from within DRM I could find
involves linking with GBM (generic buffer management for Mesa.)
Because of this, I'm pretty sure it won't work with proprietary NVidia
drivers, but then again, last time I checked NVidia didn't offer
proper screen resolution for VT.
- VT switching doesn't seem to work at all. It's worth mentioning that
using vo_drm before introduction of VT switcher had an anomaly where
user could switch to another VT and input text to it, while video
played on top of that VT. However, that isn't the case with drm_egl:
I can't switch to other VT during playback like this. This makes me
think that it's either a limitation coming from my firmware or from
EGL/KMS itself rather than a bug with my code. Nonetheless, I still
left (untestable) VT switching code in place, in case it's useful to
someone else.
- The mode_id, connector_id and device_path should be configurable for
power users and people who wish to watch videos on nonprimary screen.
Unfortunately I didn't see anything that would allow OpenGL backends
to register their own set of options. At the same time, adding them to
global namespace is pointless.
- A few dozens of lines could be shared with vo_drm (setting up VT
switching, most of code behind page flipping). I don't have any strong
opinion on this.
- Sometimes I get minor visual glitches. I'm not sure if there's a race
condition of some sort, unitialized variable (doubtful), or if it's
buggy driver. (I'm using integrated Intel HD Graphics 4400 with Mesa)
- .config and .control are very minimal.
Signed-off-by: wm4 <wm4@nowhere>
2015-11-07 18:06:57 +00:00
|
|
|
{
|
|
|
|
struct priv *p = ctx->priv;
|
|
|
|
|
|
|
|
if (!p->active)
|
|
|
|
return;
|
|
|
|
p->active = false;
|
|
|
|
|
2018-06-02 10:53:54 +00:00
|
|
|
if (p->kms->atomic_context) {
|
|
|
|
if (p->kms->atomic_context->old_state.saved) {
|
2018-04-07 06:56:59 +00:00
|
|
|
if (!crtc_release_atomic(ctx))
|
|
|
|
MP_ERR(ctx->vo, "Failed to restore previous mode\n");
|
2018-06-02 10:53:54 +00:00
|
|
|
}
|
|
|
|
} else {
|
|
|
|
if (p->old_crtc) {
|
2018-04-07 06:56:59 +00:00
|
|
|
drmModeSetCrtc(p->kms->fd,
|
|
|
|
p->old_crtc->crtc_id, p->old_crtc->buffer_id,
|
|
|
|
p->old_crtc->x, p->old_crtc->y,
|
|
|
|
&p->kms->connector->connector_id, 1,
|
|
|
|
&p->old_crtc->mode);
|
2018-06-02 10:53:54 +00:00
|
|
|
drmModeFreeCrtc(p->old_crtc);
|
|
|
|
p->old_crtc = NULL;
|
2018-04-07 06:56:59 +00:00
|
|
|
}
|
vo_opengl: add DRM EGL backend
Notes:
- Unfortunately the only way to talk to EGL from within DRM I could find
involves linking with GBM (generic buffer management for Mesa.)
Because of this, I'm pretty sure it won't work with proprietary NVidia
drivers, but then again, last time I checked NVidia didn't offer
proper screen resolution for VT.
- VT switching doesn't seem to work at all. It's worth mentioning that
using vo_drm before introduction of VT switcher had an anomaly where
user could switch to another VT and input text to it, while video
played on top of that VT. However, that isn't the case with drm_egl:
I can't switch to other VT during playback like this. This makes me
think that it's either a limitation coming from my firmware or from
EGL/KMS itself rather than a bug with my code. Nonetheless, I still
left (untestable) VT switching code in place, in case it's useful to
someone else.
- The mode_id, connector_id and device_path should be configurable for
power users and people who wish to watch videos on nonprimary screen.
Unfortunately I didn't see anything that would allow OpenGL backends
to register their own set of options. At the same time, adding them to
global namespace is pointless.
- A few dozens of lines could be shared with vo_drm (setting up VT
switching, most of code behind page flipping). I don't have any strong
opinion on this.
- Sometimes I get minor visual glitches. I'm not sure if there's a race
condition of some sort, unitialized variable (doubtful), or if it's
buggy driver. (I'm using integrated Intel HD Graphics 4400 with Mesa)
- .config and .control are very minimal.
Signed-off-by: wm4 <wm4@nowhere>
2015-11-07 18:06:57 +00:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static void release_vt(void *data)
|
|
|
|
{
|
vo_opengl: refactor into vo_gpu
This is done in several steps:
1. refactor MPGLContext -> struct ra_ctx
2. move GL-specific stuff in vo_opengl into opengl/context.c
3. generalize context creation to support other APIs, and add --gpu-api
4. rename all of the --opengl- options that are no longer opengl-specific
5. move all of the stuff from opengl/* that isn't GL-specific into gpu/
(note: opengl/gl_utils.h became opengl/utils.h)
6. rename vo_opengl to vo_gpu
7. to handle window screenshots, the short-term approach was to just add
it to ra_swchain_fns. Long term (and for vulkan) this has to be moved to
ra itself (and vo_gpu altered to compensate), but this was a stop-gap
measure to prevent this commit from getting too big
8. move ra->fns->flush to ra_gl_ctx instead
9. some other minor changes that I've probably already forgotten
Note: This is one half of a major refactor, the other half of which is
provided by rossy's following commit. This commit enables support for
all linux platforms, while his version enables support for all non-linux
platforms.
Note 2: vo_opengl_cb.c also re-uses ra_gl_ctx so it benefits from the
--opengl- options like --opengl-early-flush, --opengl-finish etc. Should
be a strict superset of the old functionality.
Disclaimer: Since I have no way of compiling mpv on all platforms, some
of these ports were done blindly. Specifically, the blind ports included
context_mali_fbdev.c and context_rpi.c. Since they're both based on
egl_helpers, the port should have gone smoothly without any major
changes required. But if somebody complains about a compile error on
those platforms (assuming anybody actually uses them), you know where to
complain.
2017-09-14 06:04:55 +00:00
|
|
|
struct ra_ctx *ctx = data;
|
2018-02-24 17:53:16 +00:00
|
|
|
MP_VERBOSE(ctx->vo, "Releasing VT\n");
|
vo_opengl: add DRM EGL backend
Notes:
- Unfortunately the only way to talk to EGL from within DRM I could find
involves linking with GBM (generic buffer management for Mesa.)
Because of this, I'm pretty sure it won't work with proprietary NVidia
drivers, but then again, last time I checked NVidia didn't offer
proper screen resolution for VT.
- VT switching doesn't seem to work at all. It's worth mentioning that
using vo_drm before introduction of VT switcher had an anomaly where
user could switch to another VT and input text to it, while video
played on top of that VT. However, that isn't the case with drm_egl:
I can't switch to other VT during playback like this. This makes me
think that it's either a limitation coming from my firmware or from
EGL/KMS itself rather than a bug with my code. Nonetheless, I still
left (untestable) VT switching code in place, in case it's useful to
someone else.
- The mode_id, connector_id and device_path should be configurable for
power users and people who wish to watch videos on nonprimary screen.
Unfortunately I didn't see anything that would allow OpenGL backends
to register their own set of options. At the same time, adding them to
global namespace is pointless.
- A few dozens of lines could be shared with vo_drm (setting up VT
switching, most of code behind page flipping). I don't have any strong
opinion on this.
- Sometimes I get minor visual glitches. I'm not sure if there's a race
condition of some sort, unitialized variable (doubtful), or if it's
buggy driver. (I'm using integrated Intel HD Graphics 4400 with Mesa)
- .config and .control are very minimal.
Signed-off-by: wm4 <wm4@nowhere>
2015-11-07 18:06:57 +00:00
|
|
|
crtc_release(ctx);
|
|
|
|
if (USE_MASTER) {
|
|
|
|
//this function enables support for switching to x, weston etc.
|
|
|
|
//however, for whatever reason, it can be called only by root users.
|
|
|
|
//until things change, this is commented.
|
|
|
|
struct priv *p = ctx->priv;
|
|
|
|
if (drmDropMaster(p->kms->fd)) {
|
2016-10-04 20:07:19 +00:00
|
|
|
MP_WARN(ctx->vo, "Failed to drop DRM master: %s\n",
|
|
|
|
mp_strerror(errno));
|
vo_opengl: add DRM EGL backend
Notes:
- Unfortunately the only way to talk to EGL from within DRM I could find
involves linking with GBM (generic buffer management for Mesa.)
Because of this, I'm pretty sure it won't work with proprietary NVidia
drivers, but then again, last time I checked NVidia didn't offer
proper screen resolution for VT.
- VT switching doesn't seem to work at all. It's worth mentioning that
using vo_drm before introduction of VT switcher had an anomaly where
user could switch to another VT and input text to it, while video
played on top of that VT. However, that isn't the case with drm_egl:
I can't switch to other VT during playback like this. This makes me
think that it's either a limitation coming from my firmware or from
EGL/KMS itself rather than a bug with my code. Nonetheless, I still
left (untestable) VT switching code in place, in case it's useful to
someone else.
- The mode_id, connector_id and device_path should be configurable for
power users and people who wish to watch videos on nonprimary screen.
Unfortunately I didn't see anything that would allow OpenGL backends
to register their own set of options. At the same time, adding them to
global namespace is pointless.
- A few dozens of lines could be shared with vo_drm (setting up VT
switching, most of code behind page flipping). I don't have any strong
opinion on this.
- Sometimes I get minor visual glitches. I'm not sure if there's a race
condition of some sort, unitialized variable (doubtful), or if it's
buggy driver. (I'm using integrated Intel HD Graphics 4400 with Mesa)
- .config and .control are very minimal.
Signed-off-by: wm4 <wm4@nowhere>
2015-11-07 18:06:57 +00:00
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static void acquire_vt(void *data)
|
|
|
|
{
|
vo_opengl: refactor into vo_gpu
This is done in several steps:
1. refactor MPGLContext -> struct ra_ctx
2. move GL-specific stuff in vo_opengl into opengl/context.c
3. generalize context creation to support other APIs, and add --gpu-api
4. rename all of the --opengl- options that are no longer opengl-specific
5. move all of the stuff from opengl/* that isn't GL-specific into gpu/
(note: opengl/gl_utils.h became opengl/utils.h)
6. rename vo_opengl to vo_gpu
7. to handle window screenshots, the short-term approach was to just add
it to ra_swchain_fns. Long term (and for vulkan) this has to be moved to
ra itself (and vo_gpu altered to compensate), but this was a stop-gap
measure to prevent this commit from getting too big
8. move ra->fns->flush to ra_gl_ctx instead
9. some other minor changes that I've probably already forgotten
Note: This is one half of a major refactor, the other half of which is
provided by rossy's following commit. This commit enables support for
all linux platforms, while his version enables support for all non-linux
platforms.
Note 2: vo_opengl_cb.c also re-uses ra_gl_ctx so it benefits from the
--opengl- options like --opengl-early-flush, --opengl-finish etc. Should
be a strict superset of the old functionality.
Disclaimer: Since I have no way of compiling mpv on all platforms, some
of these ports were done blindly. Specifically, the blind ports included
context_mali_fbdev.c and context_rpi.c. Since they're both based on
egl_helpers, the port should have gone smoothly without any major
changes required. But if somebody complains about a compile error on
those platforms (assuming anybody actually uses them), you know where to
complain.
2017-09-14 06:04:55 +00:00
|
|
|
struct ra_ctx *ctx = data;
|
2018-02-24 17:53:16 +00:00
|
|
|
MP_VERBOSE(ctx->vo, "Acquiring VT\n");
|
vo_opengl: add DRM EGL backend
Notes:
- Unfortunately the only way to talk to EGL from within DRM I could find
involves linking with GBM (generic buffer management for Mesa.)
Because of this, I'm pretty sure it won't work with proprietary NVidia
drivers, but then again, last time I checked NVidia didn't offer
proper screen resolution for VT.
- VT switching doesn't seem to work at all. It's worth mentioning that
using vo_drm before introduction of VT switcher had an anomaly where
user could switch to another VT and input text to it, while video
played on top of that VT. However, that isn't the case with drm_egl:
I can't switch to other VT during playback like this. This makes me
think that it's either a limitation coming from my firmware or from
EGL/KMS itself rather than a bug with my code. Nonetheless, I still
left (untestable) VT switching code in place, in case it's useful to
someone else.
- The mode_id, connector_id and device_path should be configurable for
power users and people who wish to watch videos on nonprimary screen.
Unfortunately I didn't see anything that would allow OpenGL backends
to register their own set of options. At the same time, adding them to
global namespace is pointless.
- A few dozens of lines could be shared with vo_drm (setting up VT
switching, most of code behind page flipping). I don't have any strong
opinion on this.
- Sometimes I get minor visual glitches. I'm not sure if there's a race
condition of some sort, unitialized variable (doubtful), or if it's
buggy driver. (I'm using integrated Intel HD Graphics 4400 with Mesa)
- .config and .control are very minimal.
Signed-off-by: wm4 <wm4@nowhere>
2015-11-07 18:06:57 +00:00
|
|
|
if (USE_MASTER) {
|
|
|
|
struct priv *p = ctx->priv;
|
|
|
|
if (drmSetMaster(p->kms->fd)) {
|
2016-10-04 20:07:19 +00:00
|
|
|
MP_WARN(ctx->vo, "Failed to acquire DRM master: %s\n",
|
|
|
|
mp_strerror(errno));
|
vo_opengl: add DRM EGL backend
Notes:
- Unfortunately the only way to talk to EGL from within DRM I could find
involves linking with GBM (generic buffer management for Mesa.)
Because of this, I'm pretty sure it won't work with proprietary NVidia
drivers, but then again, last time I checked NVidia didn't offer
proper screen resolution for VT.
- VT switching doesn't seem to work at all. It's worth mentioning that
using vo_drm before introduction of VT switcher had an anomaly where
user could switch to another VT and input text to it, while video
played on top of that VT. However, that isn't the case with drm_egl:
I can't switch to other VT during playback like this. This makes me
think that it's either a limitation coming from my firmware or from
EGL/KMS itself rather than a bug with my code. Nonetheless, I still
left (untestable) VT switching code in place, in case it's useful to
someone else.
- The mode_id, connector_id and device_path should be configurable for
power users and people who wish to watch videos on nonprimary screen.
Unfortunately I didn't see anything that would allow OpenGL backends
to register their own set of options. At the same time, adding them to
global namespace is pointless.
- A few dozens of lines could be shared with vo_drm (setting up VT
switching, most of code behind page flipping). I don't have any strong
opinion on this.
- Sometimes I get minor visual glitches. I'm not sure if there's a race
condition of some sort, unitialized variable (doubtful), or if it's
buggy driver. (I'm using integrated Intel HD Graphics 4400 with Mesa)
- .config and .control are very minimal.
Signed-off-by: wm4 <wm4@nowhere>
2015-11-07 18:06:57 +00:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
crtc_setup(ctx);
|
|
|
|
}
|
|
|
|
|
2018-12-08 20:47:18 +00:00
|
|
|
static void queue_flip(struct ra_ctx *ctx, struct gbm_frame *frame)
|
vo_opengl: add DRM EGL backend
Notes:
- Unfortunately the only way to talk to EGL from within DRM I could find
involves linking with GBM (generic buffer management for Mesa.)
Because of this, I'm pretty sure it won't work with proprietary NVidia
drivers, but then again, last time I checked NVidia didn't offer
proper screen resolution for VT.
- VT switching doesn't seem to work at all. It's worth mentioning that
using vo_drm before introduction of VT switcher had an anomaly where
user could switch to another VT and input text to it, while video
played on top of that VT. However, that isn't the case with drm_egl:
I can't switch to other VT during playback like this. This makes me
think that it's either a limitation coming from my firmware or from
EGL/KMS itself rather than a bug with my code. Nonetheless, I still
left (untestable) VT switching code in place, in case it's useful to
someone else.
- The mode_id, connector_id and device_path should be configurable for
power users and people who wish to watch videos on nonprimary screen.
Unfortunately I didn't see anything that would allow OpenGL backends
to register their own set of options. At the same time, adding them to
global namespace is pointless.
- A few dozens of lines could be shared with vo_drm (setting up VT
switching, most of code behind page flipping). I don't have any strong
opinion on this.
- Sometimes I get minor visual glitches. I'm not sure if there's a race
condition of some sort, unitialized variable (doubtful), or if it's
buggy driver. (I'm using integrated Intel HD Graphics 4400 with Mesa)
- .config and .control are very minimal.
Signed-off-by: wm4 <wm4@nowhere>
2015-11-07 18:06:57 +00:00
|
|
|
{
|
|
|
|
struct priv *p = ctx->priv;
|
2017-10-23 15:51:49 +00:00
|
|
|
struct drm_atomic_context *atomic_ctx = p->kms->atomic_context;
|
|
|
|
int ret;
|
|
|
|
|
2018-12-08 20:47:18 +00:00
|
|
|
update_framebuffer_from_bo(ctx, frame->bo);
|
|
|
|
|
|
|
|
// Alloc and fill the data struct for the page flip callback
|
2019-07-29 17:32:29 +00:00
|
|
|
struct drm_pflip_cb_closure *data = talloc(ctx, struct drm_pflip_cb_closure);
|
|
|
|
data->frame_vsync = &frame->vsync;
|
|
|
|
data->vsync = &p->vsync;
|
|
|
|
data->vsync_info = &p->vsync_info;
|
|
|
|
data->waiting_for_flip = &p->waiting_for_flip;
|
2018-12-08 20:47:18 +00:00
|
|
|
|
2017-10-23 15:51:49 +00:00
|
|
|
if (atomic_ctx) {
|
2018-12-01 11:01:17 +00:00
|
|
|
drm_object_set_property(atomic_ctx->request, atomic_ctx->draw_plane, "FB_ID", p->fb->id);
|
|
|
|
drm_object_set_property(atomic_ctx->request, atomic_ctx->draw_plane, "CRTC_ID", atomic_ctx->crtc->id);
|
|
|
|
drm_object_set_property(atomic_ctx->request, atomic_ctx->draw_plane, "ZPOS", 1);
|
2017-10-23 15:51:49 +00:00
|
|
|
|
|
|
|
ret = drmModeAtomicCommit(p->kms->fd, atomic_ctx->request,
|
2018-12-08 20:47:18 +00:00
|
|
|
DRM_MODE_ATOMIC_NONBLOCK | DRM_MODE_PAGE_FLIP_EVENT, data);
|
|
|
|
if (ret) {
|
2017-10-23 15:51:49 +00:00
|
|
|
MP_WARN(ctx->vo, "Failed to commit atomic request (%d)\n", ret);
|
2018-12-08 20:47:18 +00:00
|
|
|
talloc_free(data);
|
|
|
|
}
|
2017-10-23 15:51:49 +00:00
|
|
|
} else {
|
|
|
|
ret = drmModePageFlip(p->kms->fd, p->kms->crtc_id, p->fb->id,
|
2018-12-08 20:47:18 +00:00
|
|
|
DRM_MODE_PAGE_FLIP_EVENT, data);
|
2017-10-23 15:51:49 +00:00
|
|
|
if (ret) {
|
|
|
|
MP_WARN(ctx->vo, "Failed to queue page flip: %s\n", mp_strerror(errno));
|
2018-12-08 20:47:18 +00:00
|
|
|
talloc_free(data);
|
2017-10-23 15:51:49 +00:00
|
|
|
}
|
vo_opengl: refactor into vo_gpu
This is done in several steps:
1. refactor MPGLContext -> struct ra_ctx
2. move GL-specific stuff in vo_opengl into opengl/context.c
3. generalize context creation to support other APIs, and add --gpu-api
4. rename all of the --opengl- options that are no longer opengl-specific
5. move all of the stuff from opengl/* that isn't GL-specific into gpu/
(note: opengl/gl_utils.h became opengl/utils.h)
6. rename vo_opengl to vo_gpu
7. to handle window screenshots, the short-term approach was to just add
it to ra_swchain_fns. Long term (and for vulkan) this has to be moved to
ra itself (and vo_gpu altered to compensate), but this was a stop-gap
measure to prevent this commit from getting too big
8. move ra->fns->flush to ra_gl_ctx instead
9. some other minor changes that I've probably already forgotten
Note: This is one half of a major refactor, the other half of which is
provided by rossy's following commit. This commit enables support for
all linux platforms, while his version enables support for all non-linux
platforms.
Note 2: vo_opengl_cb.c also re-uses ra_gl_ctx so it benefits from the
--opengl- options like --opengl-early-flush, --opengl-finish etc. Should
be a strict superset of the old functionality.
Disclaimer: Since I have no way of compiling mpv on all platforms, some
of these ports were done blindly. Specifically, the blind ports included
context_mali_fbdev.c and context_rpi.c. Since they're both based on
egl_helpers, the port should have gone smoothly without any major
changes required. But if somebody complains about a compile error on
those platforms (assuming anybody actually uses them), you know where to
complain.
2017-09-14 06:04:55 +00:00
|
|
|
}
|
2018-11-27 17:39:16 +00:00
|
|
|
p->waiting_for_flip = true;
|
|
|
|
|
|
|
|
if (atomic_ctx) {
|
|
|
|
drmModeAtomicFree(atomic_ctx->request);
|
|
|
|
atomic_ctx->request = drmModeAtomicAlloc();
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static void wait_on_flip(struct ra_ctx *ctx)
|
|
|
|
{
|
|
|
|
struct priv *p = ctx->priv;
|
vo_opengl: refactor into vo_gpu
This is done in several steps:
1. refactor MPGLContext -> struct ra_ctx
2. move GL-specific stuff in vo_opengl into opengl/context.c
3. generalize context creation to support other APIs, and add --gpu-api
4. rename all of the --opengl- options that are no longer opengl-specific
5. move all of the stuff from opengl/* that isn't GL-specific into gpu/
(note: opengl/gl_utils.h became opengl/utils.h)
6. rename vo_opengl to vo_gpu
7. to handle window screenshots, the short-term approach was to just add
it to ra_swchain_fns. Long term (and for vulkan) this has to be moved to
ra itself (and vo_gpu altered to compensate), but this was a stop-gap
measure to prevent this commit from getting too big
8. move ra->fns->flush to ra_gl_ctx instead
9. some other minor changes that I've probably already forgotten
Note: This is one half of a major refactor, the other half of which is
provided by rossy's following commit. This commit enables support for
all linux platforms, while his version enables support for all non-linux
platforms.
Note 2: vo_opengl_cb.c also re-uses ra_gl_ctx so it benefits from the
--opengl- options like --opengl-early-flush, --opengl-finish etc. Should
be a strict superset of the old functionality.
Disclaimer: Since I have no way of compiling mpv on all platforms, some
of these ports were done blindly. Specifically, the blind ports included
context_mali_fbdev.c and context_rpi.c. Since they're both based on
egl_helpers, the port should have gone smoothly without any major
changes required. But if somebody complains about a compile error on
those platforms (assuming anybody actually uses them), you know where to
complain.
2017-09-14 06:04:55 +00:00
|
|
|
|
|
|
|
// poll page flip finish event
|
2018-11-27 17:39:16 +00:00
|
|
|
while (p->waiting_for_flip) {
|
|
|
|
const int timeout_ms = 3000;
|
|
|
|
struct pollfd fds[1] = { { .events = POLLIN, .fd = p->kms->fd } };
|
|
|
|
poll(fds, 1, timeout_ms);
|
|
|
|
if (fds[0].revents & POLLIN) {
|
|
|
|
const int ret = drmHandleEvent(p->kms->fd, &p->ev);
|
2019-04-18 07:59:46 +00:00
|
|
|
if (ret != 0) {
|
2018-11-27 17:39:16 +00:00
|
|
|
MP_ERR(ctx->vo, "drmHandleEvent failed: %i\n", ret);
|
2019-04-18 07:59:46 +00:00
|
|
|
return;
|
|
|
|
}
|
vo_opengl: refactor into vo_gpu
This is done in several steps:
1. refactor MPGLContext -> struct ra_ctx
2. move GL-specific stuff in vo_opengl into opengl/context.c
3. generalize context creation to support other APIs, and add --gpu-api
4. rename all of the --opengl- options that are no longer opengl-specific
5. move all of the stuff from opengl/* that isn't GL-specific into gpu/
(note: opengl/gl_utils.h became opengl/utils.h)
6. rename vo_opengl to vo_gpu
7. to handle window screenshots, the short-term approach was to just add
it to ra_swchain_fns. Long term (and for vulkan) this has to be moved to
ra itself (and vo_gpu altered to compensate), but this was a stop-gap
measure to prevent this commit from getting too big
8. move ra->fns->flush to ra_gl_ctx instead
9. some other minor changes that I've probably already forgotten
Note: This is one half of a major refactor, the other half of which is
provided by rossy's following commit. This commit enables support for
all linux platforms, while his version enables support for all non-linux
platforms.
Note 2: vo_opengl_cb.c also re-uses ra_gl_ctx so it benefits from the
--opengl- options like --opengl-early-flush, --opengl-finish etc. Should
be a strict superset of the old functionality.
Disclaimer: Since I have no way of compiling mpv on all platforms, some
of these ports were done blindly. Specifically, the blind ports included
context_mali_fbdev.c and context_rpi.c. Since they're both based on
egl_helpers, the port should have gone smoothly without any major
changes required. But if somebody complains about a compile error on
those platforms (assuming anybody actually uses them), you know where to
complain.
2017-09-14 06:04:55 +00:00
|
|
|
}
|
|
|
|
}
|
2018-11-27 17:39:16 +00:00
|
|
|
}
|
2017-10-23 15:51:49 +00:00
|
|
|
|
2018-12-08 20:47:18 +00:00
|
|
|
static void enqueue_bo(struct ra_ctx *ctx, struct gbm_bo *bo)
|
|
|
|
{
|
|
|
|
struct priv *p = ctx->priv;
|
|
|
|
|
|
|
|
p->vsync.sbc++;
|
|
|
|
struct gbm_frame *new_frame = talloc(p, struct gbm_frame);
|
|
|
|
new_frame->bo = bo;
|
|
|
|
new_frame->vsync = p->vsync;
|
|
|
|
MP_TARRAY_APPEND(p, p->gbm.bo_queue, p->gbm.num_bos, new_frame);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void dequeue_bo(struct ra_ctx *ctx)
|
|
|
|
{
|
|
|
|
struct priv *p = ctx->priv;
|
|
|
|
|
|
|
|
talloc_free(p->gbm.bo_queue[0]);
|
|
|
|
MP_TARRAY_REMOVE_AT(p->gbm.bo_queue, p->gbm.num_bos, 0);
|
|
|
|
}
|
|
|
|
|
2018-11-27 17:39:16 +00:00
|
|
|
static void swapchain_step(struct ra_ctx *ctx)
|
|
|
|
{
|
|
|
|
struct priv *p = ctx->priv;
|
|
|
|
|
2018-12-08 20:47:18 +00:00
|
|
|
if (!(p->gbm.num_bos > 0))
|
|
|
|
return;
|
|
|
|
|
|
|
|
if (p->gbm.bo_queue[0]->bo)
|
|
|
|
gbm_surface_release_buffer(p->gbm.surface, p->gbm.bo_queue[0]->bo);
|
|
|
|
dequeue_bo(ctx);
|
2018-11-27 17:39:16 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
static void new_fence(struct ra_ctx *ctx)
|
|
|
|
{
|
|
|
|
struct priv *p = ctx->priv;
|
|
|
|
|
|
|
|
if (p->gl.FenceSync) {
|
|
|
|
GLsync fence = p->gl.FenceSync(GL_SYNC_GPU_COMMANDS_COMPLETE, 0);
|
|
|
|
if (fence)
|
|
|
|
MP_TARRAY_APPEND(p, p->vsync_fences, p->num_vsync_fences, fence);
|
2017-10-23 15:51:49 +00:00
|
|
|
}
|
2018-11-27 17:39:16 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
static void wait_fence(struct ra_ctx *ctx)
|
|
|
|
{
|
|
|
|
struct priv *p = ctx->priv;
|
|
|
|
|
|
|
|
while (p->num_vsync_fences && (p->num_vsync_fences >= p->gbm.num_bos)) {
|
|
|
|
p->gl.ClientWaitSync(p->vsync_fences[0], GL_SYNC_FLUSH_COMMANDS_BIT, 1e9);
|
|
|
|
p->gl.DeleteSync(p->vsync_fences[0]);
|
|
|
|
MP_TARRAY_REMOVE_AT(p->vsync_fences, p->num_vsync_fences, 0);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static bool drm_egl_start_frame(struct ra_swapchain *sw, struct ra_fbo *out_fbo)
|
|
|
|
{
|
|
|
|
struct ra_ctx *ctx = sw->ctx;
|
|
|
|
struct priv *p = ctx->priv;
|
|
|
|
|
|
|
|
if (p->kms->atomic_context && !p->kms->atomic_context->request) {
|
|
|
|
p->kms->atomic_context->request = drmModeAtomicAlloc();
|
|
|
|
p->drm_params.atomic_request_ptr = &p->kms->atomic_context->request;
|
|
|
|
}
|
|
|
|
|
|
|
|
return ra_gl_ctx_start_frame(sw, out_fbo);
|
|
|
|
}
|
|
|
|
|
|
|
|
static bool drm_egl_submit_frame(struct ra_swapchain *sw, const struct vo_frame *frame)
|
|
|
|
{
|
|
|
|
struct ra_ctx *ctx = sw->ctx;
|
|
|
|
struct priv *p = ctx->priv;
|
vo_opengl: refactor into vo_gpu
This is done in several steps:
1. refactor MPGLContext -> struct ra_ctx
2. move GL-specific stuff in vo_opengl into opengl/context.c
3. generalize context creation to support other APIs, and add --gpu-api
4. rename all of the --opengl- options that are no longer opengl-specific
5. move all of the stuff from opengl/* that isn't GL-specific into gpu/
(note: opengl/gl_utils.h became opengl/utils.h)
6. rename vo_opengl to vo_gpu
7. to handle window screenshots, the short-term approach was to just add
it to ra_swchain_fns. Long term (and for vulkan) this has to be moved to
ra itself (and vo_gpu altered to compensate), but this was a stop-gap
measure to prevent this commit from getting too big
8. move ra->fns->flush to ra_gl_ctx instead
9. some other minor changes that I've probably already forgotten
Note: This is one half of a major refactor, the other half of which is
provided by rossy's following commit. This commit enables support for
all linux platforms, while his version enables support for all non-linux
platforms.
Note 2: vo_opengl_cb.c also re-uses ra_gl_ctx so it benefits from the
--opengl- options like --opengl-early-flush, --opengl-finish etc. Should
be a strict superset of the old functionality.
Disclaimer: Since I have no way of compiling mpv on all platforms, some
of these ports were done blindly. Specifically, the blind ports included
context_mali_fbdev.c and context_rpi.c. Since they're both based on
egl_helpers, the port should have gone smoothly without any major
changes required. But if somebody complains about a compile error on
those platforms (assuming anybody actually uses them), you know where to
complain.
2017-09-14 06:04:55 +00:00
|
|
|
|
2018-11-27 17:39:16 +00:00
|
|
|
p->still = frame->still;
|
|
|
|
|
|
|
|
return ra_gl_ctx_submit_frame(sw, frame);
|
vo_opengl: refactor into vo_gpu
This is done in several steps:
1. refactor MPGLContext -> struct ra_ctx
2. move GL-specific stuff in vo_opengl into opengl/context.c
3. generalize context creation to support other APIs, and add --gpu-api
4. rename all of the --opengl- options that are no longer opengl-specific
5. move all of the stuff from opengl/* that isn't GL-specific into gpu/
(note: opengl/gl_utils.h became opengl/utils.h)
6. rename vo_opengl to vo_gpu
7. to handle window screenshots, the short-term approach was to just add
it to ra_swchain_fns. Long term (and for vulkan) this has to be moved to
ra itself (and vo_gpu altered to compensate), but this was a stop-gap
measure to prevent this commit from getting too big
8. move ra->fns->flush to ra_gl_ctx instead
9. some other minor changes that I've probably already forgotten
Note: This is one half of a major refactor, the other half of which is
provided by rossy's following commit. This commit enables support for
all linux platforms, while his version enables support for all non-linux
platforms.
Note 2: vo_opengl_cb.c also re-uses ra_gl_ctx so it benefits from the
--opengl- options like --opengl-early-flush, --opengl-finish etc. Should
be a strict superset of the old functionality.
Disclaimer: Since I have no way of compiling mpv on all platforms, some
of these ports were done blindly. Specifically, the blind ports included
context_mali_fbdev.c and context_rpi.c. Since they're both based on
egl_helpers, the port should have gone smoothly without any major
changes required. But if somebody complains about a compile error on
those platforms (assuming anybody actually uses them), you know where to
complain.
2017-09-14 06:04:55 +00:00
|
|
|
}
|
vo_opengl: add DRM EGL backend
Notes:
- Unfortunately the only way to talk to EGL from within DRM I could find
involves linking with GBM (generic buffer management for Mesa.)
Because of this, I'm pretty sure it won't work with proprietary NVidia
drivers, but then again, last time I checked NVidia didn't offer
proper screen resolution for VT.
- VT switching doesn't seem to work at all. It's worth mentioning that
using vo_drm before introduction of VT switcher had an anomaly where
user could switch to another VT and input text to it, while video
played on top of that VT. However, that isn't the case with drm_egl:
I can't switch to other VT during playback like this. This makes me
think that it's either a limitation coming from my firmware or from
EGL/KMS itself rather than a bug with my code. Nonetheless, I still
left (untestable) VT switching code in place, in case it's useful to
someone else.
- The mode_id, connector_id and device_path should be configurable for
power users and people who wish to watch videos on nonprimary screen.
Unfortunately I didn't see anything that would allow OpenGL backends
to register their own set of options. At the same time, adding them to
global namespace is pointless.
- A few dozens of lines could be shared with vo_drm (setting up VT
switching, most of code behind page flipping). I don't have any strong
opinion on this.
- Sometimes I get minor visual glitches. I'm not sure if there's a race
condition of some sort, unitialized variable (doubtful), or if it's
buggy driver. (I'm using integrated Intel HD Graphics 4400 with Mesa)
- .config and .control are very minimal.
Signed-off-by: wm4 <wm4@nowhere>
2015-11-07 18:06:57 +00:00
|
|
|
|
2018-11-27 17:39:16 +00:00
|
|
|
static void drm_egl_swap_buffers(struct ra_swapchain *sw)
|
|
|
|
{
|
|
|
|
struct ra_ctx *ctx = sw->ctx;
|
|
|
|
struct priv *p = ctx->priv;
|
|
|
|
const bool drain = p->paused || p->still; // True when we need to drain the swapchain
|
|
|
|
|
|
|
|
if (!p->active)
|
|
|
|
return;
|
|
|
|
|
|
|
|
wait_fence(ctx);
|
|
|
|
|
|
|
|
eglSwapBuffers(p->egl.display, p->egl.surface);
|
|
|
|
|
|
|
|
struct gbm_bo *new_bo = gbm_surface_lock_front_buffer(p->gbm.surface);
|
|
|
|
if (!new_bo) {
|
|
|
|
MP_ERR(ctx->vo, "Couldn't lock front buffer\n");
|
|
|
|
return;
|
|
|
|
}
|
2018-12-08 20:47:18 +00:00
|
|
|
enqueue_bo(ctx, new_bo);
|
2018-11-27 17:39:16 +00:00
|
|
|
new_fence(ctx);
|
|
|
|
|
2019-09-28 08:26:23 +00:00
|
|
|
while (drain || p->gbm.num_bos > ctx->vo->opts->swapchain_depth ||
|
|
|
|
!gbm_surface_has_free_buffers(p->gbm.surface)) {
|
2018-11-27 17:39:16 +00:00
|
|
|
if (p->waiting_for_flip) {
|
|
|
|
wait_on_flip(ctx);
|
|
|
|
swapchain_step(ctx);
|
|
|
|
}
|
|
|
|
if (p->gbm.num_bos <= 1)
|
|
|
|
break;
|
2018-12-08 20:47:18 +00:00
|
|
|
if (!p->gbm.bo_queue[1] || !p->gbm.bo_queue[1]->bo) {
|
2018-11-27 17:39:16 +00:00
|
|
|
MP_ERR(ctx->vo, "Hole in swapchain?\n");
|
|
|
|
swapchain_step(ctx);
|
|
|
|
continue;
|
|
|
|
}
|
2018-12-08 20:47:18 +00:00
|
|
|
queue_flip(ctx, p->gbm.bo_queue[1]);
|
2018-11-27 17:39:16 +00:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static const struct ra_swapchain_fns drm_egl_swapchain = {
|
|
|
|
.start_frame = drm_egl_start_frame,
|
|
|
|
.submit_frame = drm_egl_submit_frame,
|
|
|
|
.swap_buffers = drm_egl_swap_buffers,
|
|
|
|
};
|
|
|
|
|
vo_opengl: refactor into vo_gpu
This is done in several steps:
1. refactor MPGLContext -> struct ra_ctx
2. move GL-specific stuff in vo_opengl into opengl/context.c
3. generalize context creation to support other APIs, and add --gpu-api
4. rename all of the --opengl- options that are no longer opengl-specific
5. move all of the stuff from opengl/* that isn't GL-specific into gpu/
(note: opengl/gl_utils.h became opengl/utils.h)
6. rename vo_opengl to vo_gpu
7. to handle window screenshots, the short-term approach was to just add
it to ra_swchain_fns. Long term (and for vulkan) this has to be moved to
ra itself (and vo_gpu altered to compensate), but this was a stop-gap
measure to prevent this commit from getting too big
8. move ra->fns->flush to ra_gl_ctx instead
9. some other minor changes that I've probably already forgotten
Note: This is one half of a major refactor, the other half of which is
provided by rossy's following commit. This commit enables support for
all linux platforms, while his version enables support for all non-linux
platforms.
Note 2: vo_opengl_cb.c also re-uses ra_gl_ctx so it benefits from the
--opengl- options like --opengl-early-flush, --opengl-finish etc. Should
be a strict superset of the old functionality.
Disclaimer: Since I have no way of compiling mpv on all platforms, some
of these ports were done blindly. Specifically, the blind ports included
context_mali_fbdev.c and context_rpi.c. Since they're both based on
egl_helpers, the port should have gone smoothly without any major
changes required. But if somebody complains about a compile error on
those platforms (assuming anybody actually uses them), you know where to
complain.
2017-09-14 06:04:55 +00:00
|
|
|
static void drm_egl_uninit(struct ra_ctx *ctx)
|
|
|
|
{
|
|
|
|
struct priv *p = ctx->priv;
|
2018-03-20 06:42:44 +00:00
|
|
|
struct drm_atomic_context *atomic_ctx = p->kms->atomic_context;
|
|
|
|
|
|
|
|
if (atomic_ctx) {
|
|
|
|
int ret = drmModeAtomicCommit(p->kms->fd, atomic_ctx->request, 0, NULL);
|
|
|
|
if (ret)
|
|
|
|
MP_ERR(ctx->vo, "Failed to commit atomic request (%d)\n", ret);
|
|
|
|
drmModeAtomicFree(atomic_ctx->request);
|
|
|
|
}
|
|
|
|
|
vo_opengl: refactor into vo_gpu
This is done in several steps:
1. refactor MPGLContext -> struct ra_ctx
2. move GL-specific stuff in vo_opengl into opengl/context.c
3. generalize context creation to support other APIs, and add --gpu-api
4. rename all of the --opengl- options that are no longer opengl-specific
5. move all of the stuff from opengl/* that isn't GL-specific into gpu/
(note: opengl/gl_utils.h became opengl/utils.h)
6. rename vo_opengl to vo_gpu
7. to handle window screenshots, the short-term approach was to just add
it to ra_swchain_fns. Long term (and for vulkan) this has to be moved to
ra itself (and vo_gpu altered to compensate), but this was a stop-gap
measure to prevent this commit from getting too big
8. move ra->fns->flush to ra_gl_ctx instead
9. some other minor changes that I've probably already forgotten
Note: This is one half of a major refactor, the other half of which is
provided by rossy's following commit. This commit enables support for
all linux platforms, while his version enables support for all non-linux
platforms.
Note 2: vo_opengl_cb.c also re-uses ra_gl_ctx so it benefits from the
--opengl- options like --opengl-early-flush, --opengl-finish etc. Should
be a strict superset of the old functionality.
Disclaimer: Since I have no way of compiling mpv on all platforms, some
of these ports were done blindly. Specifically, the blind ports included
context_mali_fbdev.c and context_rpi.c. Since they're both based on
egl_helpers, the port should have gone smoothly without any major
changes required. But if somebody complains about a compile error on
those platforms (assuming anybody actually uses them), you know where to
complain.
2017-09-14 06:04:55 +00:00
|
|
|
ra_gl_ctx_uninit(ctx);
|
|
|
|
|
|
|
|
crtc_release(ctx);
|
vo_opengl: add DRM EGL backend
Notes:
- Unfortunately the only way to talk to EGL from within DRM I could find
involves linking with GBM (generic buffer management for Mesa.)
Because of this, I'm pretty sure it won't work with proprietary NVidia
drivers, but then again, last time I checked NVidia didn't offer
proper screen resolution for VT.
- VT switching doesn't seem to work at all. It's worth mentioning that
using vo_drm before introduction of VT switcher had an anomaly where
user could switch to another VT and input text to it, while video
played on top of that VT. However, that isn't the case with drm_egl:
I can't switch to other VT during playback like this. This makes me
think that it's either a limitation coming from my firmware or from
EGL/KMS itself rather than a bug with my code. Nonetheless, I still
left (untestable) VT switching code in place, in case it's useful to
someone else.
- The mode_id, connector_id and device_path should be configurable for
power users and people who wish to watch videos on nonprimary screen.
Unfortunately I didn't see anything that would allow OpenGL backends
to register their own set of options. At the same time, adding them to
global namespace is pointless.
- A few dozens of lines could be shared with vo_drm (setting up VT
switching, most of code behind page flipping). I don't have any strong
opinion on this.
- Sometimes I get minor visual glitches. I'm not sure if there's a race
condition of some sort, unitialized variable (doubtful), or if it's
buggy driver. (I'm using integrated Intel HD Graphics 4400 with Mesa)
- .config and .control are very minimal.
Signed-off-by: wm4 <wm4@nowhere>
2015-11-07 18:06:57 +00:00
|
|
|
if (p->vt_switcher_active)
|
|
|
|
vt_switcher_destroy(&p->vt_switcher);
|
|
|
|
|
2018-11-27 17:39:16 +00:00
|
|
|
// According to GBM documentation all BO:s must be released before
|
|
|
|
// gbm_surface_destroy can be called on the surface.
|
|
|
|
while (p->gbm.num_bos) {
|
|
|
|
swapchain_step(ctx);
|
|
|
|
}
|
|
|
|
|
2016-10-04 20:07:19 +00:00
|
|
|
eglMakeCurrent(p->egl.display, EGL_NO_SURFACE, EGL_NO_SURFACE,
|
|
|
|
EGL_NO_CONTEXT);
|
vo_opengl: add DRM EGL backend
Notes:
- Unfortunately the only way to talk to EGL from within DRM I could find
involves linking with GBM (generic buffer management for Mesa.)
Because of this, I'm pretty sure it won't work with proprietary NVidia
drivers, but then again, last time I checked NVidia didn't offer
proper screen resolution for VT.
- VT switching doesn't seem to work at all. It's worth mentioning that
using vo_drm before introduction of VT switcher had an anomaly where
user could switch to another VT and input text to it, while video
played on top of that VT. However, that isn't the case with drm_egl:
I can't switch to other VT during playback like this. This makes me
think that it's either a limitation coming from my firmware or from
EGL/KMS itself rather than a bug with my code. Nonetheless, I still
left (untestable) VT switching code in place, in case it's useful to
someone else.
- The mode_id, connector_id and device_path should be configurable for
power users and people who wish to watch videos on nonprimary screen.
Unfortunately I didn't see anything that would allow OpenGL backends
to register their own set of options. At the same time, adding them to
global namespace is pointless.
- A few dozens of lines could be shared with vo_drm (setting up VT
switching, most of code behind page flipping). I don't have any strong
opinion on this.
- Sometimes I get minor visual glitches. I'm not sure if there's a race
condition of some sort, unitialized variable (doubtful), or if it's
buggy driver. (I'm using integrated Intel HD Graphics 4400 with Mesa)
- .config and .control are very minimal.
Signed-off-by: wm4 <wm4@nowhere>
2015-11-07 18:06:57 +00:00
|
|
|
eglDestroyContext(p->egl.display, p->egl.context);
|
|
|
|
eglDestroySurface(p->egl.display, p->egl.surface);
|
|
|
|
gbm_surface_destroy(p->gbm.surface);
|
|
|
|
eglTerminate(p->egl.display);
|
|
|
|
gbm_device_destroy(p->gbm.device);
|
|
|
|
p->egl.context = EGL_NO_CONTEXT;
|
|
|
|
eglDestroyContext(p->egl.display, p->egl.context);
|
|
|
|
|
2018-06-28 13:06:41 +00:00
|
|
|
close(p->drm_params.render_fd);
|
|
|
|
|
vo_opengl: add DRM EGL backend
Notes:
- Unfortunately the only way to talk to EGL from within DRM I could find
involves linking with GBM (generic buffer management for Mesa.)
Because of this, I'm pretty sure it won't work with proprietary NVidia
drivers, but then again, last time I checked NVidia didn't offer
proper screen resolution for VT.
- VT switching doesn't seem to work at all. It's worth mentioning that
using vo_drm before introduction of VT switcher had an anomaly where
user could switch to another VT and input text to it, while video
played on top of that VT. However, that isn't the case with drm_egl:
I can't switch to other VT during playback like this. This makes me
think that it's either a limitation coming from my firmware or from
EGL/KMS itself rather than a bug with my code. Nonetheless, I still
left (untestable) VT switching code in place, in case it's useful to
someone else.
- The mode_id, connector_id and device_path should be configurable for
power users and people who wish to watch videos on nonprimary screen.
Unfortunately I didn't see anything that would allow OpenGL backends
to register their own set of options. At the same time, adding them to
global namespace is pointless.
- A few dozens of lines could be shared with vo_drm (setting up VT
switching, most of code behind page flipping). I don't have any strong
opinion on this.
- Sometimes I get minor visual glitches. I'm not sure if there's a race
condition of some sort, unitialized variable (doubtful), or if it's
buggy driver. (I'm using integrated Intel HD Graphics 4400 with Mesa)
- .config and .control are very minimal.
Signed-off-by: wm4 <wm4@nowhere>
2015-11-07 18:06:57 +00:00
|
|
|
if (p->kms) {
|
|
|
|
kms_destroy(p->kms);
|
|
|
|
p->kms = 0;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2018-12-01 11:01:17 +00:00
|
|
|
// If the draw plane supports ARGB we want to use that, but if it doesn't we
|
|
|
|
// fall back on XRGB. If we do not have atomic there is no particular reason to
|
|
|
|
// be using ARGB (drmprime hwdec will not work without atomic, anyway), so we
|
|
|
|
// fall back to XRGB (another reason is that we do not have the convenient
|
|
|
|
// atomic_ctx and its convenient plane fields).
|
2018-02-13 17:40:47 +00:00
|
|
|
static bool probe_gbm_format(struct ra_ctx *ctx, uint32_t argb_format, uint32_t xrgb_format)
|
2017-11-09 08:54:28 +00:00
|
|
|
{
|
|
|
|
struct priv *p = ctx->priv;
|
2018-02-13 17:40:47 +00:00
|
|
|
|
2017-11-09 08:54:28 +00:00
|
|
|
if (!p->kms->atomic_context) {
|
2018-02-13 17:40:47 +00:00
|
|
|
p->gbm_format = xrgb_format;
|
2018-12-01 11:01:17 +00:00
|
|
|
MP_VERBOSE(ctx->vo, "Not using DRM Atomic: Use %s for draw plane.\n",
|
2018-02-13 17:40:47 +00:00
|
|
|
gbm_format_to_string(xrgb_format));
|
2017-11-09 08:54:28 +00:00
|
|
|
return true;
|
|
|
|
}
|
|
|
|
|
|
|
|
drmModePlane *drmplane =
|
2018-12-01 11:01:17 +00:00
|
|
|
drmModeGetPlane(p->kms->fd, p->kms->atomic_context->draw_plane->id);
|
2018-02-13 17:40:47 +00:00
|
|
|
bool have_argb = false;
|
|
|
|
bool have_xrgb = false;
|
2017-11-09 08:54:28 +00:00
|
|
|
bool result = false;
|
|
|
|
for (unsigned int i = 0; i < drmplane->count_formats; ++i) {
|
2018-02-13 17:40:47 +00:00
|
|
|
if (drmplane->formats[i] == argb_format) {
|
|
|
|
have_argb = true;
|
|
|
|
} else if (drmplane->formats[i] == xrgb_format) {
|
|
|
|
have_xrgb = true;
|
2017-11-09 08:54:28 +00:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2018-02-13 17:40:47 +00:00
|
|
|
if (have_argb) {
|
|
|
|
p->gbm_format = argb_format;
|
2018-12-01 11:01:17 +00:00
|
|
|
MP_VERBOSE(ctx->vo, "%s supported by draw plane.\n", gbm_format_to_string(argb_format));
|
2017-11-09 08:54:28 +00:00
|
|
|
result = true;
|
2018-02-13 17:40:47 +00:00
|
|
|
} else if (have_xrgb) {
|
|
|
|
p->gbm_format = xrgb_format;
|
2018-12-01 11:01:17 +00:00
|
|
|
MP_VERBOSE(ctx->vo, "%s not supported by draw plane: Falling back to %s.\n",
|
2018-02-13 17:40:47 +00:00
|
|
|
gbm_format_to_string(argb_format), gbm_format_to_string(xrgb_format));
|
2017-11-09 08:54:28 +00:00
|
|
|
result = true;
|
|
|
|
}
|
|
|
|
|
|
|
|
drmModeFreePlane(drmplane);
|
|
|
|
return result;
|
|
|
|
}
|
|
|
|
|
2018-12-08 20:47:18 +00:00
|
|
|
static void drm_egl_get_vsync(struct ra_ctx *ctx, struct vo_vsync_info *info)
|
|
|
|
{
|
|
|
|
struct priv *p = ctx->priv;
|
|
|
|
*info = p->vsync_info;
|
2018-11-27 17:39:16 +00:00
|
|
|
}
|
|
|
|
|
vo_opengl: refactor into vo_gpu
This is done in several steps:
1. refactor MPGLContext -> struct ra_ctx
2. move GL-specific stuff in vo_opengl into opengl/context.c
3. generalize context creation to support other APIs, and add --gpu-api
4. rename all of the --opengl- options that are no longer opengl-specific
5. move all of the stuff from opengl/* that isn't GL-specific into gpu/
(note: opengl/gl_utils.h became opengl/utils.h)
6. rename vo_opengl to vo_gpu
7. to handle window screenshots, the short-term approach was to just add
it to ra_swchain_fns. Long term (and for vulkan) this has to be moved to
ra itself (and vo_gpu altered to compensate), but this was a stop-gap
measure to prevent this commit from getting too big
8. move ra->fns->flush to ra_gl_ctx instead
9. some other minor changes that I've probably already forgotten
Note: This is one half of a major refactor, the other half of which is
provided by rossy's following commit. This commit enables support for
all linux platforms, while his version enables support for all non-linux
platforms.
Note 2: vo_opengl_cb.c also re-uses ra_gl_ctx so it benefits from the
--opengl- options like --opengl-early-flush, --opengl-finish etc. Should
be a strict superset of the old functionality.
Disclaimer: Since I have no way of compiling mpv on all platforms, some
of these ports were done blindly. Specifically, the blind ports included
context_mali_fbdev.c and context_rpi.c. Since they're both based on
egl_helpers, the port should have gone smoothly without any major
changes required. But if somebody complains about a compile error on
those platforms (assuming anybody actually uses them), you know where to
complain.
2017-09-14 06:04:55 +00:00
|
|
|
static bool drm_egl_init(struct ra_ctx *ctx)
|
vo_opengl: add DRM EGL backend
Notes:
- Unfortunately the only way to talk to EGL from within DRM I could find
involves linking with GBM (generic buffer management for Mesa.)
Because of this, I'm pretty sure it won't work with proprietary NVidia
drivers, but then again, last time I checked NVidia didn't offer
proper screen resolution for VT.
- VT switching doesn't seem to work at all. It's worth mentioning that
using vo_drm before introduction of VT switcher had an anomaly where
user could switch to another VT and input text to it, while video
played on top of that VT. However, that isn't the case with drm_egl:
I can't switch to other VT during playback like this. This makes me
think that it's either a limitation coming from my firmware or from
EGL/KMS itself rather than a bug with my code. Nonetheless, I still
left (untestable) VT switching code in place, in case it's useful to
someone else.
- The mode_id, connector_id and device_path should be configurable for
power users and people who wish to watch videos on nonprimary screen.
Unfortunately I didn't see anything that would allow OpenGL backends
to register their own set of options. At the same time, adding them to
global namespace is pointless.
- A few dozens of lines could be shared with vo_drm (setting up VT
switching, most of code behind page flipping). I don't have any strong
opinion on this.
- Sometimes I get minor visual glitches. I'm not sure if there's a race
condition of some sort, unitialized variable (doubtful), or if it's
buggy driver. (I'm using integrated Intel HD Graphics 4400 with Mesa)
- .config and .control are very minimal.
Signed-off-by: wm4 <wm4@nowhere>
2015-11-07 18:06:57 +00:00
|
|
|
{
|
vo_opengl: refactor into vo_gpu
This is done in several steps:
1. refactor MPGLContext -> struct ra_ctx
2. move GL-specific stuff in vo_opengl into opengl/context.c
3. generalize context creation to support other APIs, and add --gpu-api
4. rename all of the --opengl- options that are no longer opengl-specific
5. move all of the stuff from opengl/* that isn't GL-specific into gpu/
(note: opengl/gl_utils.h became opengl/utils.h)
6. rename vo_opengl to vo_gpu
7. to handle window screenshots, the short-term approach was to just add
it to ra_swchain_fns. Long term (and for vulkan) this has to be moved to
ra itself (and vo_gpu altered to compensate), but this was a stop-gap
measure to prevent this commit from getting too big
8. move ra->fns->flush to ra_gl_ctx instead
9. some other minor changes that I've probably already forgotten
Note: This is one half of a major refactor, the other half of which is
provided by rossy's following commit. This commit enables support for
all linux platforms, while his version enables support for all non-linux
platforms.
Note 2: vo_opengl_cb.c also re-uses ra_gl_ctx so it benefits from the
--opengl- options like --opengl-early-flush, --opengl-finish etc. Should
be a strict superset of the old functionality.
Disclaimer: Since I have no way of compiling mpv on all platforms, some
of these ports were done blindly. Specifically, the blind ports included
context_mali_fbdev.c and context_rpi.c. Since they're both based on
egl_helpers, the port should have gone smoothly without any major
changes required. But if somebody complains about a compile error on
those platforms (assuming anybody actually uses them), you know where to
complain.
2017-09-14 06:04:55 +00:00
|
|
|
if (ctx->opts.probing) {
|
|
|
|
MP_VERBOSE(ctx, "DRM EGL backend can be activated only manually.\n");
|
|
|
|
return false;
|
2015-11-08 22:23:36 +00:00
|
|
|
}
|
vo_opengl: refactor into vo_gpu
This is done in several steps:
1. refactor MPGLContext -> struct ra_ctx
2. move GL-specific stuff in vo_opengl into opengl/context.c
3. generalize context creation to support other APIs, and add --gpu-api
4. rename all of the --opengl- options that are no longer opengl-specific
5. move all of the stuff from opengl/* that isn't GL-specific into gpu/
(note: opengl/gl_utils.h became opengl/utils.h)
6. rename vo_opengl to vo_gpu
7. to handle window screenshots, the short-term approach was to just add
it to ra_swchain_fns. Long term (and for vulkan) this has to be moved to
ra itself (and vo_gpu altered to compensate), but this was a stop-gap
measure to prevent this commit from getting too big
8. move ra->fns->flush to ra_gl_ctx instead
9. some other minor changes that I've probably already forgotten
Note: This is one half of a major refactor, the other half of which is
provided by rossy's following commit. This commit enables support for
all linux platforms, while his version enables support for all non-linux
platforms.
Note 2: vo_opengl_cb.c also re-uses ra_gl_ctx so it benefits from the
--opengl- options like --opengl-early-flush, --opengl-finish etc. Should
be a strict superset of the old functionality.
Disclaimer: Since I have no way of compiling mpv on all platforms, some
of these ports were done blindly. Specifically, the blind ports included
context_mali_fbdev.c and context_rpi.c. Since they're both based on
egl_helpers, the port should have gone smoothly without any major
changes required. But if somebody complains about a compile error on
those platforms (assuming anybody actually uses them), you know where to
complain.
2017-09-14 06:04:55 +00:00
|
|
|
|
|
|
|
struct priv *p = ctx->priv = talloc_zero(ctx, struct priv);
|
vo_opengl: add DRM EGL backend
Notes:
- Unfortunately the only way to talk to EGL from within DRM I could find
involves linking with GBM (generic buffer management for Mesa.)
Because of this, I'm pretty sure it won't work with proprietary NVidia
drivers, but then again, last time I checked NVidia didn't offer
proper screen resolution for VT.
- VT switching doesn't seem to work at all. It's worth mentioning that
using vo_drm before introduction of VT switcher had an anomaly where
user could switch to another VT and input text to it, while video
played on top of that VT. However, that isn't the case with drm_egl:
I can't switch to other VT during playback like this. This makes me
think that it's either a limitation coming from my firmware or from
EGL/KMS itself rather than a bug with my code. Nonetheless, I still
left (untestable) VT switching code in place, in case it's useful to
someone else.
- The mode_id, connector_id and device_path should be configurable for
power users and people who wish to watch videos on nonprimary screen.
Unfortunately I didn't see anything that would allow OpenGL backends
to register their own set of options. At the same time, adding them to
global namespace is pointless.
- A few dozens of lines could be shared with vo_drm (setting up VT
switching, most of code behind page flipping). I don't have any strong
opinion on this.
- Sometimes I get minor visual glitches. I'm not sure if there's a race
condition of some sort, unitialized variable (doubtful), or if it's
buggy driver. (I'm using integrated Intel HD Graphics 4400 with Mesa)
- .config and .control are very minimal.
Signed-off-by: wm4 <wm4@nowhere>
2015-11-07 18:06:57 +00:00
|
|
|
p->ev.version = DRM_EVENT_CONTEXT_VERSION;
|
2019-07-29 17:32:29 +00:00
|
|
|
p->ev.page_flip_handler = &drm_pflip_cb;
|
vo_opengl: add DRM EGL backend
Notes:
- Unfortunately the only way to talk to EGL from within DRM I could find
involves linking with GBM (generic buffer management for Mesa.)
Because of this, I'm pretty sure it won't work with proprietary NVidia
drivers, but then again, last time I checked NVidia didn't offer
proper screen resolution for VT.
- VT switching doesn't seem to work at all. It's worth mentioning that
using vo_drm before introduction of VT switcher had an anomaly where
user could switch to another VT and input text to it, while video
played on top of that VT. However, that isn't the case with drm_egl:
I can't switch to other VT during playback like this. This makes me
think that it's either a limitation coming from my firmware or from
EGL/KMS itself rather than a bug with my code. Nonetheless, I still
left (untestable) VT switching code in place, in case it's useful to
someone else.
- The mode_id, connector_id and device_path should be configurable for
power users and people who wish to watch videos on nonprimary screen.
Unfortunately I didn't see anything that would allow OpenGL backends
to register their own set of options. At the same time, adding them to
global namespace is pointless.
- A few dozens of lines could be shared with vo_drm (setting up VT
switching, most of code behind page flipping). I don't have any strong
opinion on this.
- Sometimes I get minor visual glitches. I'm not sure if there's a race
condition of some sort, unitialized variable (doubtful), or if it's
buggy driver. (I'm using integrated Intel HD Graphics 4400 with Mesa)
- .config and .control are very minimal.
Signed-off-by: wm4 <wm4@nowhere>
2015-11-07 18:06:57 +00:00
|
|
|
|
2015-11-07 20:11:04 +00:00
|
|
|
p->vt_switcher_active = vt_switcher_init(&p->vt_switcher, ctx->vo->log);
|
vo_opengl: add DRM EGL backend
Notes:
- Unfortunately the only way to talk to EGL from within DRM I could find
involves linking with GBM (generic buffer management for Mesa.)
Because of this, I'm pretty sure it won't work with proprietary NVidia
drivers, but then again, last time I checked NVidia didn't offer
proper screen resolution for VT.
- VT switching doesn't seem to work at all. It's worth mentioning that
using vo_drm before introduction of VT switcher had an anomaly where
user could switch to another VT and input text to it, while video
played on top of that VT. However, that isn't the case with drm_egl:
I can't switch to other VT during playback like this. This makes me
think that it's either a limitation coming from my firmware or from
EGL/KMS itself rather than a bug with my code. Nonetheless, I still
left (untestable) VT switching code in place, in case it's useful to
someone else.
- The mode_id, connector_id and device_path should be configurable for
power users and people who wish to watch videos on nonprimary screen.
Unfortunately I didn't see anything that would allow OpenGL backends
to register their own set of options. At the same time, adding them to
global namespace is pointless.
- A few dozens of lines could be shared with vo_drm (setting up VT
switching, most of code behind page flipping). I don't have any strong
opinion on this.
- Sometimes I get minor visual glitches. I'm not sure if there's a race
condition of some sort, unitialized variable (doubtful), or if it's
buggy driver. (I'm using integrated Intel HD Graphics 4400 with Mesa)
- .config and .control are very minimal.
Signed-off-by: wm4 <wm4@nowhere>
2015-11-07 18:06:57 +00:00
|
|
|
if (p->vt_switcher_active) {
|
|
|
|
vt_switcher_acquire(&p->vt_switcher, acquire_vt, ctx);
|
|
|
|
vt_switcher_release(&p->vt_switcher, release_vt, ctx);
|
|
|
|
} else {
|
vo_opengl: refactor into vo_gpu
This is done in several steps:
1. refactor MPGLContext -> struct ra_ctx
2. move GL-specific stuff in vo_opengl into opengl/context.c
3. generalize context creation to support other APIs, and add --gpu-api
4. rename all of the --opengl- options that are no longer opengl-specific
5. move all of the stuff from opengl/* that isn't GL-specific into gpu/
(note: opengl/gl_utils.h became opengl/utils.h)
6. rename vo_opengl to vo_gpu
7. to handle window screenshots, the short-term approach was to just add
it to ra_swchain_fns. Long term (and for vulkan) this has to be moved to
ra itself (and vo_gpu altered to compensate), but this was a stop-gap
measure to prevent this commit from getting too big
8. move ra->fns->flush to ra_gl_ctx instead
9. some other minor changes that I've probably already forgotten
Note: This is one half of a major refactor, the other half of which is
provided by rossy's following commit. This commit enables support for
all linux platforms, while his version enables support for all non-linux
platforms.
Note 2: vo_opengl_cb.c also re-uses ra_gl_ctx so it benefits from the
--opengl- options like --opengl-early-flush, --opengl-finish etc. Should
be a strict superset of the old functionality.
Disclaimer: Since I have no way of compiling mpv on all platforms, some
of these ports were done blindly. Specifically, the blind ports included
context_mali_fbdev.c and context_rpi.c. Since they're both based on
egl_helpers, the port should have gone smoothly without any major
changes required. But if somebody complains about a compile error on
those platforms (assuming anybody actually uses them), you know where to
complain.
2017-09-14 06:04:55 +00:00
|
|
|
MP_WARN(ctx, "Failed to set up VT switcher. Terminal switching will be unavailable.\n");
|
vo_opengl: add DRM EGL backend
Notes:
- Unfortunately the only way to talk to EGL from within DRM I could find
involves linking with GBM (generic buffer management for Mesa.)
Because of this, I'm pretty sure it won't work with proprietary NVidia
drivers, but then again, last time I checked NVidia didn't offer
proper screen resolution for VT.
- VT switching doesn't seem to work at all. It's worth mentioning that
using vo_drm before introduction of VT switcher had an anomaly where
user could switch to another VT and input text to it, while video
played on top of that VT. However, that isn't the case with drm_egl:
I can't switch to other VT during playback like this. This makes me
think that it's either a limitation coming from my firmware or from
EGL/KMS itself rather than a bug with my code. Nonetheless, I still
left (untestable) VT switching code in place, in case it's useful to
someone else.
- The mode_id, connector_id and device_path should be configurable for
power users and people who wish to watch videos on nonprimary screen.
Unfortunately I didn't see anything that would allow OpenGL backends
to register their own set of options. At the same time, adding them to
global namespace is pointless.
- A few dozens of lines could be shared with vo_drm (setting up VT
switching, most of code behind page flipping). I don't have any strong
opinion on this.
- Sometimes I get minor visual glitches. I'm not sure if there's a race
condition of some sort, unitialized variable (doubtful), or if it's
buggy driver. (I'm using integrated Intel HD Graphics 4400 with Mesa)
- .config and .control are very minimal.
Signed-off-by: wm4 <wm4@nowhere>
2015-11-07 18:06:57 +00:00
|
|
|
}
|
|
|
|
|
vo_opengl: refactor into vo_gpu
This is done in several steps:
1. refactor MPGLContext -> struct ra_ctx
2. move GL-specific stuff in vo_opengl into opengl/context.c
3. generalize context creation to support other APIs, and add --gpu-api
4. rename all of the --opengl- options that are no longer opengl-specific
5. move all of the stuff from opengl/* that isn't GL-specific into gpu/
(note: opengl/gl_utils.h became opengl/utils.h)
6. rename vo_opengl to vo_gpu
7. to handle window screenshots, the short-term approach was to just add
it to ra_swchain_fns. Long term (and for vulkan) this has to be moved to
ra itself (and vo_gpu altered to compensate), but this was a stop-gap
measure to prevent this commit from getting too big
8. move ra->fns->flush to ra_gl_ctx instead
9. some other minor changes that I've probably already forgotten
Note: This is one half of a major refactor, the other half of which is
provided by rossy's following commit. This commit enables support for
all linux platforms, while his version enables support for all non-linux
platforms.
Note 2: vo_opengl_cb.c also re-uses ra_gl_ctx so it benefits from the
--opengl- options like --opengl-early-flush, --opengl-finish etc. Should
be a strict superset of the old functionality.
Disclaimer: Since I have no way of compiling mpv on all platforms, some
of these ports were done blindly. Specifically, the blind ports included
context_mali_fbdev.c and context_rpi.c. Since they're both based on
egl_helpers, the port should have gone smoothly without any major
changes required. But if somebody complains about a compile error on
those platforms (assuming anybody actually uses them), you know where to
complain.
2017-09-14 06:04:55 +00:00
|
|
|
MP_VERBOSE(ctx, "Initializing KMS\n");
|
2017-10-23 06:59:58 +00:00
|
|
|
p->kms = kms_create(ctx->log, ctx->vo->opts->drm_opts->drm_connector_spec,
|
2018-06-02 10:53:58 +00:00
|
|
|
ctx->vo->opts->drm_opts->drm_mode_spec,
|
2018-12-01 11:01:17 +00:00
|
|
|
ctx->vo->opts->drm_opts->drm_draw_plane,
|
2018-06-28 13:23:19 +00:00
|
|
|
ctx->vo->opts->drm_opts->drm_drmprime_video_plane,
|
|
|
|
ctx->vo->opts->drm_opts->drm_atomic);
|
vo_opengl: add DRM EGL backend
Notes:
- Unfortunately the only way to talk to EGL from within DRM I could find
involves linking with GBM (generic buffer management for Mesa.)
Because of this, I'm pretty sure it won't work with proprietary NVidia
drivers, but then again, last time I checked NVidia didn't offer
proper screen resolution for VT.
- VT switching doesn't seem to work at all. It's worth mentioning that
using vo_drm before introduction of VT switcher had an anomaly where
user could switch to another VT and input text to it, while video
played on top of that VT. However, that isn't the case with drm_egl:
I can't switch to other VT during playback like this. This makes me
think that it's either a limitation coming from my firmware or from
EGL/KMS itself rather than a bug with my code. Nonetheless, I still
left (untestable) VT switching code in place, in case it's useful to
someone else.
- The mode_id, connector_id and device_path should be configurable for
power users and people who wish to watch videos on nonprimary screen.
Unfortunately I didn't see anything that would allow OpenGL backends
to register their own set of options. At the same time, adding them to
global namespace is pointless.
- A few dozens of lines could be shared with vo_drm (setting up VT
switching, most of code behind page flipping). I don't have any strong
opinion on this.
- Sometimes I get minor visual glitches. I'm not sure if there's a race
condition of some sort, unitialized variable (doubtful), or if it's
buggy driver. (I'm using integrated Intel HD Graphics 4400 with Mesa)
- .config and .control are very minimal.
Signed-off-by: wm4 <wm4@nowhere>
2015-11-07 18:06:57 +00:00
|
|
|
if (!p->kms) {
|
2017-10-23 15:51:49 +00:00
|
|
|
MP_ERR(ctx, "Failed to create KMS.\n");
|
vo_opengl: refactor into vo_gpu
This is done in several steps:
1. refactor MPGLContext -> struct ra_ctx
2. move GL-specific stuff in vo_opengl into opengl/context.c
3. generalize context creation to support other APIs, and add --gpu-api
4. rename all of the --opengl- options that are no longer opengl-specific
5. move all of the stuff from opengl/* that isn't GL-specific into gpu/
(note: opengl/gl_utils.h became opengl/utils.h)
6. rename vo_opengl to vo_gpu
7. to handle window screenshots, the short-term approach was to just add
it to ra_swchain_fns. Long term (and for vulkan) this has to be moved to
ra itself (and vo_gpu altered to compensate), but this was a stop-gap
measure to prevent this commit from getting too big
8. move ra->fns->flush to ra_gl_ctx instead
9. some other minor changes that I've probably already forgotten
Note: This is one half of a major refactor, the other half of which is
provided by rossy's following commit. This commit enables support for
all linux platforms, while his version enables support for all non-linux
platforms.
Note 2: vo_opengl_cb.c also re-uses ra_gl_ctx so it benefits from the
--opengl- options like --opengl-early-flush, --opengl-finish etc. Should
be a strict superset of the old functionality.
Disclaimer: Since I have no way of compiling mpv on all platforms, some
of these ports were done blindly. Specifically, the blind ports included
context_mali_fbdev.c and context_rpi.c. Since they're both based on
egl_helpers, the port should have gone smoothly without any major
changes required. But if somebody complains about a compile error on
those platforms (assuming anybody actually uses them), you know where to
complain.
2017-09-14 06:04:55 +00:00
|
|
|
return false;
|
vo_opengl: add DRM EGL backend
Notes:
- Unfortunately the only way to talk to EGL from within DRM I could find
involves linking with GBM (generic buffer management for Mesa.)
Because of this, I'm pretty sure it won't work with proprietary NVidia
drivers, but then again, last time I checked NVidia didn't offer
proper screen resolution for VT.
- VT switching doesn't seem to work at all. It's worth mentioning that
using vo_drm before introduction of VT switcher had an anomaly where
user could switch to another VT and input text to it, while video
played on top of that VT. However, that isn't the case with drm_egl:
I can't switch to other VT during playback like this. This makes me
think that it's either a limitation coming from my firmware or from
EGL/KMS itself rather than a bug with my code. Nonetheless, I still
left (untestable) VT switching code in place, in case it's useful to
someone else.
- The mode_id, connector_id and device_path should be configurable for
power users and people who wish to watch videos on nonprimary screen.
Unfortunately I didn't see anything that would allow OpenGL backends
to register their own set of options. At the same time, adding them to
global namespace is pointless.
- A few dozens of lines could be shared with vo_drm (setting up VT
switching, most of code behind page flipping). I don't have any strong
opinion on this.
- Sometimes I get minor visual glitches. I'm not sure if there's a race
condition of some sort, unitialized variable (doubtful), or if it's
buggy driver. (I'm using integrated Intel HD Graphics 4400 with Mesa)
- .config and .control are very minimal.
Signed-off-by: wm4 <wm4@nowhere>
2015-11-07 18:06:57 +00:00
|
|
|
}
|
|
|
|
|
2018-12-01 11:01:17 +00:00
|
|
|
if (ctx->vo->opts->drm_opts->drm_draw_surface_size.wh_valid) {
|
2018-04-29 13:09:16 +00:00
|
|
|
if (p->kms->atomic_context) {
|
2018-12-01 11:01:17 +00:00
|
|
|
p->draw_surface_size.width = ctx->vo->opts->drm_opts->drm_draw_surface_size.w;
|
|
|
|
p->draw_surface_size.height = ctx->vo->opts->drm_opts->drm_draw_surface_size.h;
|
2018-04-29 13:09:16 +00:00
|
|
|
} else {
|
2018-12-01 11:01:17 +00:00
|
|
|
p->draw_surface_size.width = p->kms->mode.mode.hdisplay;
|
|
|
|
p->draw_surface_size.height = p->kms->mode.mode.vdisplay;
|
|
|
|
MP_WARN(ctx, "Setting draw plane size is only available with DRM atomic, defaulting to screen resolution\n");
|
2018-04-29 13:09:16 +00:00
|
|
|
}
|
|
|
|
} else {
|
2018-12-01 11:01:17 +00:00
|
|
|
p->draw_surface_size.width = p->kms->mode.mode.hdisplay;
|
|
|
|
p->draw_surface_size.height = p->kms->mode.mode.vdisplay;
|
2018-04-29 13:09:16 +00:00
|
|
|
}
|
|
|
|
|
2018-02-13 17:40:47 +00:00
|
|
|
uint32_t argb_format;
|
|
|
|
uint32_t xrgb_format;
|
|
|
|
if (DRM_OPTS_FORMAT_XRGB2101010 == ctx->vo->opts->drm_opts->drm_format) {
|
|
|
|
argb_format = GBM_FORMAT_ARGB2101010;
|
|
|
|
xrgb_format = GBM_FORMAT_XRGB2101010;
|
|
|
|
} else {
|
|
|
|
argb_format = GBM_FORMAT_ARGB8888;
|
|
|
|
xrgb_format = GBM_FORMAT_XRGB8888;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (!probe_gbm_format(ctx, argb_format, xrgb_format)) {
|
2018-12-01 11:01:17 +00:00
|
|
|
MP_ERR(ctx->vo, "No suitable format found on draw plane (tried: %s and %s).\n",
|
2018-02-13 17:40:47 +00:00
|
|
|
gbm_format_to_string(argb_format), gbm_format_to_string(xrgb_format));
|
2017-11-09 08:54:28 +00:00
|
|
|
return false;
|
|
|
|
}
|
|
|
|
|
vo_opengl: add DRM EGL backend
Notes:
- Unfortunately the only way to talk to EGL from within DRM I could find
involves linking with GBM (generic buffer management for Mesa.)
Because of this, I'm pretty sure it won't work with proprietary NVidia
drivers, but then again, last time I checked NVidia didn't offer
proper screen resolution for VT.
- VT switching doesn't seem to work at all. It's worth mentioning that
using vo_drm before introduction of VT switcher had an anomaly where
user could switch to another VT and input text to it, while video
played on top of that VT. However, that isn't the case with drm_egl:
I can't switch to other VT during playback like this. This makes me
think that it's either a limitation coming from my firmware or from
EGL/KMS itself rather than a bug with my code. Nonetheless, I still
left (untestable) VT switching code in place, in case it's useful to
someone else.
- The mode_id, connector_id and device_path should be configurable for
power users and people who wish to watch videos on nonprimary screen.
Unfortunately I didn't see anything that would allow OpenGL backends
to register their own set of options. At the same time, adding them to
global namespace is pointless.
- A few dozens of lines could be shared with vo_drm (setting up VT
switching, most of code behind page flipping). I don't have any strong
opinion on this.
- Sometimes I get minor visual glitches. I'm not sure if there's a race
condition of some sort, unitialized variable (doubtful), or if it's
buggy driver. (I'm using integrated Intel HD Graphics 4400 with Mesa)
- .config and .control are very minimal.
Signed-off-by: wm4 <wm4@nowhere>
2015-11-07 18:06:57 +00:00
|
|
|
if (!init_gbm(ctx)) {
|
|
|
|
MP_ERR(ctx->vo, "Failed to setup GBM.\n");
|
vo_opengl: refactor into vo_gpu
This is done in several steps:
1. refactor MPGLContext -> struct ra_ctx
2. move GL-specific stuff in vo_opengl into opengl/context.c
3. generalize context creation to support other APIs, and add --gpu-api
4. rename all of the --opengl- options that are no longer opengl-specific
5. move all of the stuff from opengl/* that isn't GL-specific into gpu/
(note: opengl/gl_utils.h became opengl/utils.h)
6. rename vo_opengl to vo_gpu
7. to handle window screenshots, the short-term approach was to just add
it to ra_swchain_fns. Long term (and for vulkan) this has to be moved to
ra itself (and vo_gpu altered to compensate), but this was a stop-gap
measure to prevent this commit from getting too big
8. move ra->fns->flush to ra_gl_ctx instead
9. some other minor changes that I've probably already forgotten
Note: This is one half of a major refactor, the other half of which is
provided by rossy's following commit. This commit enables support for
all linux platforms, while his version enables support for all non-linux
platforms.
Note 2: vo_opengl_cb.c also re-uses ra_gl_ctx so it benefits from the
--opengl- options like --opengl-early-flush, --opengl-finish etc. Should
be a strict superset of the old functionality.
Disclaimer: Since I have no way of compiling mpv on all platforms, some
of these ports were done blindly. Specifically, the blind ports included
context_mali_fbdev.c and context_rpi.c. Since they're both based on
egl_helpers, the port should have gone smoothly without any major
changes required. But if somebody complains about a compile error on
those platforms (assuming anybody actually uses them), you know where to
complain.
2017-09-14 06:04:55 +00:00
|
|
|
return false;
|
vo_opengl: add DRM EGL backend
Notes:
- Unfortunately the only way to talk to EGL from within DRM I could find
involves linking with GBM (generic buffer management for Mesa.)
Because of this, I'm pretty sure it won't work with proprietary NVidia
drivers, but then again, last time I checked NVidia didn't offer
proper screen resolution for VT.
- VT switching doesn't seem to work at all. It's worth mentioning that
using vo_drm before introduction of VT switcher had an anomaly where
user could switch to another VT and input text to it, while video
played on top of that VT. However, that isn't the case with drm_egl:
I can't switch to other VT during playback like this. This makes me
think that it's either a limitation coming from my firmware or from
EGL/KMS itself rather than a bug with my code. Nonetheless, I still
left (untestable) VT switching code in place, in case it's useful to
someone else.
- The mode_id, connector_id and device_path should be configurable for
power users and people who wish to watch videos on nonprimary screen.
Unfortunately I didn't see anything that would allow OpenGL backends
to register their own set of options. At the same time, adding them to
global namespace is pointless.
- A few dozens of lines could be shared with vo_drm (setting up VT
switching, most of code behind page flipping). I don't have any strong
opinion on this.
- Sometimes I get minor visual glitches. I'm not sure if there's a race
condition of some sort, unitialized variable (doubtful), or if it's
buggy driver. (I'm using integrated Intel HD Graphics 4400 with Mesa)
- .config and .control are very minimal.
Signed-off-by: wm4 <wm4@nowhere>
2015-11-07 18:06:57 +00:00
|
|
|
}
|
|
|
|
|
vo_opengl: refactor into vo_gpu
This is done in several steps:
1. refactor MPGLContext -> struct ra_ctx
2. move GL-specific stuff in vo_opengl into opengl/context.c
3. generalize context creation to support other APIs, and add --gpu-api
4. rename all of the --opengl- options that are no longer opengl-specific
5. move all of the stuff from opengl/* that isn't GL-specific into gpu/
(note: opengl/gl_utils.h became opengl/utils.h)
6. rename vo_opengl to vo_gpu
7. to handle window screenshots, the short-term approach was to just add
it to ra_swchain_fns. Long term (and for vulkan) this has to be moved to
ra itself (and vo_gpu altered to compensate), but this was a stop-gap
measure to prevent this commit from getting too big
8. move ra->fns->flush to ra_gl_ctx instead
9. some other minor changes that I've probably already forgotten
Note: This is one half of a major refactor, the other half of which is
provided by rossy's following commit. This commit enables support for
all linux platforms, while his version enables support for all non-linux
platforms.
Note 2: vo_opengl_cb.c also re-uses ra_gl_ctx so it benefits from the
--opengl- options like --opengl-early-flush, --opengl-finish etc. Should
be a strict superset of the old functionality.
Disclaimer: Since I have no way of compiling mpv on all platforms, some
of these ports were done blindly. Specifically, the blind ports included
context_mali_fbdev.c and context_rpi.c. Since they're both based on
egl_helpers, the port should have gone smoothly without any major
changes required. But if somebody complains about a compile error on
those platforms (assuming anybody actually uses them), you know where to
complain.
2017-09-14 06:04:55 +00:00
|
|
|
if (!init_egl(ctx)) {
|
vo_opengl: add DRM EGL backend
Notes:
- Unfortunately the only way to talk to EGL from within DRM I could find
involves linking with GBM (generic buffer management for Mesa.)
Because of this, I'm pretty sure it won't work with proprietary NVidia
drivers, but then again, last time I checked NVidia didn't offer
proper screen resolution for VT.
- VT switching doesn't seem to work at all. It's worth mentioning that
using vo_drm before introduction of VT switcher had an anomaly where
user could switch to another VT and input text to it, while video
played on top of that VT. However, that isn't the case with drm_egl:
I can't switch to other VT during playback like this. This makes me
think that it's either a limitation coming from my firmware or from
EGL/KMS itself rather than a bug with my code. Nonetheless, I still
left (untestable) VT switching code in place, in case it's useful to
someone else.
- The mode_id, connector_id and device_path should be configurable for
power users and people who wish to watch videos on nonprimary screen.
Unfortunately I didn't see anything that would allow OpenGL backends
to register their own set of options. At the same time, adding them to
global namespace is pointless.
- A few dozens of lines could be shared with vo_drm (setting up VT
switching, most of code behind page flipping). I don't have any strong
opinion on this.
- Sometimes I get minor visual glitches. I'm not sure if there's a race
condition of some sort, unitialized variable (doubtful), or if it's
buggy driver. (I'm using integrated Intel HD Graphics 4400 with Mesa)
- .config and .control are very minimal.
Signed-off-by: wm4 <wm4@nowhere>
2015-11-07 18:06:57 +00:00
|
|
|
MP_ERR(ctx->vo, "Failed to setup EGL.\n");
|
vo_opengl: refactor into vo_gpu
This is done in several steps:
1. refactor MPGLContext -> struct ra_ctx
2. move GL-specific stuff in vo_opengl into opengl/context.c
3. generalize context creation to support other APIs, and add --gpu-api
4. rename all of the --opengl- options that are no longer opengl-specific
5. move all of the stuff from opengl/* that isn't GL-specific into gpu/
(note: opengl/gl_utils.h became opengl/utils.h)
6. rename vo_opengl to vo_gpu
7. to handle window screenshots, the short-term approach was to just add
it to ra_swchain_fns. Long term (and for vulkan) this has to be moved to
ra itself (and vo_gpu altered to compensate), but this was a stop-gap
measure to prevent this commit from getting too big
8. move ra->fns->flush to ra_gl_ctx instead
9. some other minor changes that I've probably already forgotten
Note: This is one half of a major refactor, the other half of which is
provided by rossy's following commit. This commit enables support for
all linux platforms, while his version enables support for all non-linux
platforms.
Note 2: vo_opengl_cb.c also re-uses ra_gl_ctx so it benefits from the
--opengl- options like --opengl-early-flush, --opengl-finish etc. Should
be a strict superset of the old functionality.
Disclaimer: Since I have no way of compiling mpv on all platforms, some
of these ports were done blindly. Specifically, the blind ports included
context_mali_fbdev.c and context_rpi.c. Since they're both based on
egl_helpers, the port should have gone smoothly without any major
changes required. But if somebody complains about a compile error on
those platforms (assuming anybody actually uses them), you know where to
complain.
2017-09-14 06:04:55 +00:00
|
|
|
return false;
|
vo_opengl: add DRM EGL backend
Notes:
- Unfortunately the only way to talk to EGL from within DRM I could find
involves linking with GBM (generic buffer management for Mesa.)
Because of this, I'm pretty sure it won't work with proprietary NVidia
drivers, but then again, last time I checked NVidia didn't offer
proper screen resolution for VT.
- VT switching doesn't seem to work at all. It's worth mentioning that
using vo_drm before introduction of VT switcher had an anomaly where
user could switch to another VT and input text to it, while video
played on top of that VT. However, that isn't the case with drm_egl:
I can't switch to other VT during playback like this. This makes me
think that it's either a limitation coming from my firmware or from
EGL/KMS itself rather than a bug with my code. Nonetheless, I still
left (untestable) VT switching code in place, in case it's useful to
someone else.
- The mode_id, connector_id and device_path should be configurable for
power users and people who wish to watch videos on nonprimary screen.
Unfortunately I didn't see anything that would allow OpenGL backends
to register their own set of options. At the same time, adding them to
global namespace is pointless.
- A few dozens of lines could be shared with vo_drm (setting up VT
switching, most of code behind page flipping). I don't have any strong
opinion on this.
- Sometimes I get minor visual glitches. I'm not sure if there's a race
condition of some sort, unitialized variable (doubtful), or if it's
buggy driver. (I'm using integrated Intel HD Graphics 4400 with Mesa)
- .config and .control are very minimal.
Signed-off-by: wm4 <wm4@nowhere>
2015-11-07 18:06:57 +00:00
|
|
|
}
|
|
|
|
|
2016-10-04 20:07:19 +00:00
|
|
|
if (!eglMakeCurrent(p->egl.display, p->egl.surface, p->egl.surface,
|
|
|
|
p->egl.context)) {
|
vo_opengl: add DRM EGL backend
Notes:
- Unfortunately the only way to talk to EGL from within DRM I could find
involves linking with GBM (generic buffer management for Mesa.)
Because of this, I'm pretty sure it won't work with proprietary NVidia
drivers, but then again, last time I checked NVidia didn't offer
proper screen resolution for VT.
- VT switching doesn't seem to work at all. It's worth mentioning that
using vo_drm before introduction of VT switcher had an anomaly where
user could switch to another VT and input text to it, while video
played on top of that VT. However, that isn't the case with drm_egl:
I can't switch to other VT during playback like this. This makes me
think that it's either a limitation coming from my firmware or from
EGL/KMS itself rather than a bug with my code. Nonetheless, I still
left (untestable) VT switching code in place, in case it's useful to
someone else.
- The mode_id, connector_id and device_path should be configurable for
power users and people who wish to watch videos on nonprimary screen.
Unfortunately I didn't see anything that would allow OpenGL backends
to register their own set of options. At the same time, adding them to
global namespace is pointless.
- A few dozens of lines could be shared with vo_drm (setting up VT
switching, most of code behind page flipping). I don't have any strong
opinion on this.
- Sometimes I get minor visual glitches. I'm not sure if there's a race
condition of some sort, unitialized variable (doubtful), or if it's
buggy driver. (I'm using integrated Intel HD Graphics 4400 with Mesa)
- .config and .control are very minimal.
Signed-off-by: wm4 <wm4@nowhere>
2015-11-07 18:06:57 +00:00
|
|
|
MP_ERR(ctx->vo, "Failed to make context current.\n");
|
vo_opengl: refactor into vo_gpu
This is done in several steps:
1. refactor MPGLContext -> struct ra_ctx
2. move GL-specific stuff in vo_opengl into opengl/context.c
3. generalize context creation to support other APIs, and add --gpu-api
4. rename all of the --opengl- options that are no longer opengl-specific
5. move all of the stuff from opengl/* that isn't GL-specific into gpu/
(note: opengl/gl_utils.h became opengl/utils.h)
6. rename vo_opengl to vo_gpu
7. to handle window screenshots, the short-term approach was to just add
it to ra_swchain_fns. Long term (and for vulkan) this has to be moved to
ra itself (and vo_gpu altered to compensate), but this was a stop-gap
measure to prevent this commit from getting too big
8. move ra->fns->flush to ra_gl_ctx instead
9. some other minor changes that I've probably already forgotten
Note: This is one half of a major refactor, the other half of which is
provided by rossy's following commit. This commit enables support for
all linux platforms, while his version enables support for all non-linux
platforms.
Note 2: vo_opengl_cb.c also re-uses ra_gl_ctx so it benefits from the
--opengl- options like --opengl-early-flush, --opengl-finish etc. Should
be a strict superset of the old functionality.
Disclaimer: Since I have no way of compiling mpv on all platforms, some
of these ports were done blindly. Specifically, the blind ports included
context_mali_fbdev.c and context_rpi.c. Since they're both based on
egl_helpers, the port should have gone smoothly without any major
changes required. But if somebody complains about a compile error on
those platforms (assuming anybody actually uses them), you know where to
complain.
2017-09-14 06:04:55 +00:00
|
|
|
return false;
|
vo_opengl: add DRM EGL backend
Notes:
- Unfortunately the only way to talk to EGL from within DRM I could find
involves linking with GBM (generic buffer management for Mesa.)
Because of this, I'm pretty sure it won't work with proprietary NVidia
drivers, but then again, last time I checked NVidia didn't offer
proper screen resolution for VT.
- VT switching doesn't seem to work at all. It's worth mentioning that
using vo_drm before introduction of VT switcher had an anomaly where
user could switch to another VT and input text to it, while video
played on top of that VT. However, that isn't the case with drm_egl:
I can't switch to other VT during playback like this. This makes me
think that it's either a limitation coming from my firmware or from
EGL/KMS itself rather than a bug with my code. Nonetheless, I still
left (untestable) VT switching code in place, in case it's useful to
someone else.
- The mode_id, connector_id and device_path should be configurable for
power users and people who wish to watch videos on nonprimary screen.
Unfortunately I didn't see anything that would allow OpenGL backends
to register their own set of options. At the same time, adding them to
global namespace is pointless.
- A few dozens of lines could be shared with vo_drm (setting up VT
switching, most of code behind page flipping). I don't have any strong
opinion on this.
- Sometimes I get minor visual glitches. I'm not sure if there's a race
condition of some sort, unitialized variable (doubtful), or if it's
buggy driver. (I'm using integrated Intel HD Graphics 4400 with Mesa)
- .config and .control are very minimal.
Signed-off-by: wm4 <wm4@nowhere>
2015-11-07 18:06:57 +00:00
|
|
|
}
|
|
|
|
|
vo_opengl: refactor into vo_gpu
This is done in several steps:
1. refactor MPGLContext -> struct ra_ctx
2. move GL-specific stuff in vo_opengl into opengl/context.c
3. generalize context creation to support other APIs, and add --gpu-api
4. rename all of the --opengl- options that are no longer opengl-specific
5. move all of the stuff from opengl/* that isn't GL-specific into gpu/
(note: opengl/gl_utils.h became opengl/utils.h)
6. rename vo_opengl to vo_gpu
7. to handle window screenshots, the short-term approach was to just add
it to ra_swchain_fns. Long term (and for vulkan) this has to be moved to
ra itself (and vo_gpu altered to compensate), but this was a stop-gap
measure to prevent this commit from getting too big
8. move ra->fns->flush to ra_gl_ctx instead
9. some other minor changes that I've probably already forgotten
Note: This is one half of a major refactor, the other half of which is
provided by rossy's following commit. This commit enables support for
all linux platforms, while his version enables support for all non-linux
platforms.
Note 2: vo_opengl_cb.c also re-uses ra_gl_ctx so it benefits from the
--opengl- options like --opengl-early-flush, --opengl-finish etc. Should
be a strict superset of the old functionality.
Disclaimer: Since I have no way of compiling mpv on all platforms, some
of these ports were done blindly. Specifically, the blind ports included
context_mali_fbdev.c and context_rpi.c. Since they're both based on
egl_helpers, the port should have gone smoothly without any major
changes required. But if somebody complains about a compile error on
those platforms (assuming anybody actually uses them), you know where to
complain.
2017-09-14 06:04:55 +00:00
|
|
|
mpegl_load_functions(&p->gl, ctx->vo->log);
|
vo_opengl: add DRM EGL backend
Notes:
- Unfortunately the only way to talk to EGL from within DRM I could find
involves linking with GBM (generic buffer management for Mesa.)
Because of this, I'm pretty sure it won't work with proprietary NVidia
drivers, but then again, last time I checked NVidia didn't offer
proper screen resolution for VT.
- VT switching doesn't seem to work at all. It's worth mentioning that
using vo_drm before introduction of VT switcher had an anomaly where
user could switch to another VT and input text to it, while video
played on top of that VT. However, that isn't the case with drm_egl:
I can't switch to other VT during playback like this. This makes me
think that it's either a limitation coming from my firmware or from
EGL/KMS itself rather than a bug with my code. Nonetheless, I still
left (untestable) VT switching code in place, in case it's useful to
someone else.
- The mode_id, connector_id and device_path should be configurable for
power users and people who wish to watch videos on nonprimary screen.
Unfortunately I didn't see anything that would allow OpenGL backends
to register their own set of options. At the same time, adding them to
global namespace is pointless.
- A few dozens of lines could be shared with vo_drm (setting up VT
switching, most of code behind page flipping). I don't have any strong
opinion on this.
- Sometimes I get minor visual glitches. I'm not sure if there's a race
condition of some sort, unitialized variable (doubtful), or if it's
buggy driver. (I'm using integrated Intel HD Graphics 4400 with Mesa)
- .config and .control are very minimal.
Signed-off-by: wm4 <wm4@nowhere>
2015-11-07 18:06:57 +00:00
|
|
|
// required by gbm_surface_lock_front_buffer
|
|
|
|
eglSwapBuffers(p->egl.display, p->egl.surface);
|
|
|
|
|
vo_opengl: refactor into vo_gpu
This is done in several steps:
1. refactor MPGLContext -> struct ra_ctx
2. move GL-specific stuff in vo_opengl into opengl/context.c
3. generalize context creation to support other APIs, and add --gpu-api
4. rename all of the --opengl- options that are no longer opengl-specific
5. move all of the stuff from opengl/* that isn't GL-specific into gpu/
(note: opengl/gl_utils.h became opengl/utils.h)
6. rename vo_opengl to vo_gpu
7. to handle window screenshots, the short-term approach was to just add
it to ra_swchain_fns. Long term (and for vulkan) this has to be moved to
ra itself (and vo_gpu altered to compensate), but this was a stop-gap
measure to prevent this commit from getting too big
8. move ra->fns->flush to ra_gl_ctx instead
9. some other minor changes that I've probably already forgotten
Note: This is one half of a major refactor, the other half of which is
provided by rossy's following commit. This commit enables support for
all linux platforms, while his version enables support for all non-linux
platforms.
Note 2: vo_opengl_cb.c also re-uses ra_gl_ctx so it benefits from the
--opengl- options like --opengl-early-flush, --opengl-finish etc. Should
be a strict superset of the old functionality.
Disclaimer: Since I have no way of compiling mpv on all platforms, some
of these ports were done blindly. Specifically, the blind ports included
context_mali_fbdev.c and context_rpi.c. Since they're both based on
egl_helpers, the port should have gone smoothly without any major
changes required. But if somebody complains about a compile error on
those platforms (assuming anybody actually uses them), you know where to
complain.
2017-09-14 06:04:55 +00:00
|
|
|
MP_VERBOSE(ctx, "Preparing framebuffer\n");
|
2018-11-27 17:39:16 +00:00
|
|
|
struct gbm_bo *new_bo = gbm_surface_lock_front_buffer(p->gbm.surface);
|
|
|
|
if (!new_bo) {
|
vo_opengl: refactor into vo_gpu
This is done in several steps:
1. refactor MPGLContext -> struct ra_ctx
2. move GL-specific stuff in vo_opengl into opengl/context.c
3. generalize context creation to support other APIs, and add --gpu-api
4. rename all of the --opengl- options that are no longer opengl-specific
5. move all of the stuff from opengl/* that isn't GL-specific into gpu/
(note: opengl/gl_utils.h became opengl/utils.h)
6. rename vo_opengl to vo_gpu
7. to handle window screenshots, the short-term approach was to just add
it to ra_swchain_fns. Long term (and for vulkan) this has to be moved to
ra itself (and vo_gpu altered to compensate), but this was a stop-gap
measure to prevent this commit from getting too big
8. move ra->fns->flush to ra_gl_ctx instead
9. some other minor changes that I've probably already forgotten
Note: This is one half of a major refactor, the other half of which is
provided by rossy's following commit. This commit enables support for
all linux platforms, while his version enables support for all non-linux
platforms.
Note 2: vo_opengl_cb.c also re-uses ra_gl_ctx so it benefits from the
--opengl- options like --opengl-early-flush, --opengl-finish etc. Should
be a strict superset of the old functionality.
Disclaimer: Since I have no way of compiling mpv on all platforms, some
of these ports were done blindly. Specifically, the blind ports included
context_mali_fbdev.c and context_rpi.c. Since they're both based on
egl_helpers, the port should have gone smoothly without any major
changes required. But if somebody complains about a compile error on
those platforms (assuming anybody actually uses them), you know where to
complain.
2017-09-14 06:04:55 +00:00
|
|
|
MP_ERR(ctx, "Failed to lock GBM surface.\n");
|
|
|
|
return false;
|
vo_opengl: add DRM EGL backend
Notes:
- Unfortunately the only way to talk to EGL from within DRM I could find
involves linking with GBM (generic buffer management for Mesa.)
Because of this, I'm pretty sure it won't work with proprietary NVidia
drivers, but then again, last time I checked NVidia didn't offer
proper screen resolution for VT.
- VT switching doesn't seem to work at all. It's worth mentioning that
using vo_drm before introduction of VT switcher had an anomaly where
user could switch to another VT and input text to it, while video
played on top of that VT. However, that isn't the case with drm_egl:
I can't switch to other VT during playback like this. This makes me
think that it's either a limitation coming from my firmware or from
EGL/KMS itself rather than a bug with my code. Nonetheless, I still
left (untestable) VT switching code in place, in case it's useful to
someone else.
- The mode_id, connector_id and device_path should be configurable for
power users and people who wish to watch videos on nonprimary screen.
Unfortunately I didn't see anything that would allow OpenGL backends
to register their own set of options. At the same time, adding them to
global namespace is pointless.
- A few dozens of lines could be shared with vo_drm (setting up VT
switching, most of code behind page flipping). I don't have any strong
opinion on this.
- Sometimes I get minor visual glitches. I'm not sure if there's a race
condition of some sort, unitialized variable (doubtful), or if it's
buggy driver. (I'm using integrated Intel HD Graphics 4400 with Mesa)
- .config and .control are very minimal.
Signed-off-by: wm4 <wm4@nowhere>
2015-11-07 18:06:57 +00:00
|
|
|
}
|
2018-12-08 20:47:18 +00:00
|
|
|
enqueue_bo(ctx, new_bo);
|
2018-11-27 17:39:16 +00:00
|
|
|
update_framebuffer_from_bo(ctx, new_bo);
|
2017-10-05 21:44:54 +00:00
|
|
|
if (!p->fb || !p->fb->id) {
|
vo_opengl: refactor into vo_gpu
This is done in several steps:
1. refactor MPGLContext -> struct ra_ctx
2. move GL-specific stuff in vo_opengl into opengl/context.c
3. generalize context creation to support other APIs, and add --gpu-api
4. rename all of the --opengl- options that are no longer opengl-specific
5. move all of the stuff from opengl/* that isn't GL-specific into gpu/
(note: opengl/gl_utils.h became opengl/utils.h)
6. rename vo_opengl to vo_gpu
7. to handle window screenshots, the short-term approach was to just add
it to ra_swchain_fns. Long term (and for vulkan) this has to be moved to
ra itself (and vo_gpu altered to compensate), but this was a stop-gap
measure to prevent this commit from getting too big
8. move ra->fns->flush to ra_gl_ctx instead
9. some other minor changes that I've probably already forgotten
Note: This is one half of a major refactor, the other half of which is
provided by rossy's following commit. This commit enables support for
all linux platforms, while his version enables support for all non-linux
platforms.
Note 2: vo_opengl_cb.c also re-uses ra_gl_ctx so it benefits from the
--opengl- options like --opengl-early-flush, --opengl-finish etc. Should
be a strict superset of the old functionality.
Disclaimer: Since I have no way of compiling mpv on all platforms, some
of these ports were done blindly. Specifically, the blind ports included
context_mali_fbdev.c and context_rpi.c. Since they're both based on
egl_helpers, the port should have gone smoothly without any major
changes required. But if somebody complains about a compile error on
those platforms (assuming anybody actually uses them), you know where to
complain.
2017-09-14 06:04:55 +00:00
|
|
|
MP_ERR(ctx, "Failed to create framebuffer.\n");
|
|
|
|
return false;
|
vo_opengl: add DRM EGL backend
Notes:
- Unfortunately the only way to talk to EGL from within DRM I could find
involves linking with GBM (generic buffer management for Mesa.)
Because of this, I'm pretty sure it won't work with proprietary NVidia
drivers, but then again, last time I checked NVidia didn't offer
proper screen resolution for VT.
- VT switching doesn't seem to work at all. It's worth mentioning that
using vo_drm before introduction of VT switcher had an anomaly where
user could switch to another VT and input text to it, while video
played on top of that VT. However, that isn't the case with drm_egl:
I can't switch to other VT during playback like this. This makes me
think that it's either a limitation coming from my firmware or from
EGL/KMS itself rather than a bug with my code. Nonetheless, I still
left (untestable) VT switching code in place, in case it's useful to
someone else.
- The mode_id, connector_id and device_path should be configurable for
power users and people who wish to watch videos on nonprimary screen.
Unfortunately I didn't see anything that would allow OpenGL backends
to register their own set of options. At the same time, adding them to
global namespace is pointless.
- A few dozens of lines could be shared with vo_drm (setting up VT
switching, most of code behind page flipping). I don't have any strong
opinion on this.
- Sometimes I get minor visual glitches. I'm not sure if there's a race
condition of some sort, unitialized variable (doubtful), or if it's
buggy driver. (I'm using integrated Intel HD Graphics 4400 with Mesa)
- .config and .control are very minimal.
Signed-off-by: wm4 <wm4@nowhere>
2015-11-07 18:06:57 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
if (!crtc_setup(ctx)) {
|
vo_opengl: refactor into vo_gpu
This is done in several steps:
1. refactor MPGLContext -> struct ra_ctx
2. move GL-specific stuff in vo_opengl into opengl/context.c
3. generalize context creation to support other APIs, and add --gpu-api
4. rename all of the --opengl- options that are no longer opengl-specific
5. move all of the stuff from opengl/* that isn't GL-specific into gpu/
(note: opengl/gl_utils.h became opengl/utils.h)
6. rename vo_opengl to vo_gpu
7. to handle window screenshots, the short-term approach was to just add
it to ra_swchain_fns. Long term (and for vulkan) this has to be moved to
ra itself (and vo_gpu altered to compensate), but this was a stop-gap
measure to prevent this commit from getting too big
8. move ra->fns->flush to ra_gl_ctx instead
9. some other minor changes that I've probably already forgotten
Note: This is one half of a major refactor, the other half of which is
provided by rossy's following commit. This commit enables support for
all linux platforms, while his version enables support for all non-linux
platforms.
Note 2: vo_opengl_cb.c also re-uses ra_gl_ctx so it benefits from the
--opengl- options like --opengl-early-flush, --opengl-finish etc. Should
be a strict superset of the old functionality.
Disclaimer: Since I have no way of compiling mpv on all platforms, some
of these ports were done blindly. Specifically, the blind ports included
context_mali_fbdev.c and context_rpi.c. Since they're both based on
egl_helpers, the port should have gone smoothly without any major
changes required. But if somebody complains about a compile error on
those platforms (assuming anybody actually uses them), you know where to
complain.
2017-09-14 06:04:55 +00:00
|
|
|
MP_ERR(ctx, "Failed to set CRTC for connector %u: %s\n",
|
2016-10-04 20:07:19 +00:00
|
|
|
p->kms->connector->connector_id, mp_strerror(errno));
|
vo_opengl: refactor into vo_gpu
This is done in several steps:
1. refactor MPGLContext -> struct ra_ctx
2. move GL-specific stuff in vo_opengl into opengl/context.c
3. generalize context creation to support other APIs, and add --gpu-api
4. rename all of the --opengl- options that are no longer opengl-specific
5. move all of the stuff from opengl/* that isn't GL-specific into gpu/
(note: opengl/gl_utils.h became opengl/utils.h)
6. rename vo_opengl to vo_gpu
7. to handle window screenshots, the short-term approach was to just add
it to ra_swchain_fns. Long term (and for vulkan) this has to be moved to
ra itself (and vo_gpu altered to compensate), but this was a stop-gap
measure to prevent this commit from getting too big
8. move ra->fns->flush to ra_gl_ctx instead
9. some other minor changes that I've probably already forgotten
Note: This is one half of a major refactor, the other half of which is
provided by rossy's following commit. This commit enables support for
all linux platforms, while his version enables support for all non-linux
platforms.
Note 2: vo_opengl_cb.c also re-uses ra_gl_ctx so it benefits from the
--opengl- options like --opengl-early-flush, --opengl-finish etc. Should
be a strict superset of the old functionality.
Disclaimer: Since I have no way of compiling mpv on all platforms, some
of these ports were done blindly. Specifically, the blind ports included
context_mali_fbdev.c and context_rpi.c. Since they're both based on
egl_helpers, the port should have gone smoothly without any major
changes required. But if somebody complains about a compile error on
those platforms (assuming anybody actually uses them), you know where to
complain.
2017-09-14 06:04:55 +00:00
|
|
|
return false;
|
vo_opengl: add DRM EGL backend
Notes:
- Unfortunately the only way to talk to EGL from within DRM I could find
involves linking with GBM (generic buffer management for Mesa.)
Because of this, I'm pretty sure it won't work with proprietary NVidia
drivers, but then again, last time I checked NVidia didn't offer
proper screen resolution for VT.
- VT switching doesn't seem to work at all. It's worth mentioning that
using vo_drm before introduction of VT switcher had an anomaly where
user could switch to another VT and input text to it, while video
played on top of that VT. However, that isn't the case with drm_egl:
I can't switch to other VT during playback like this. This makes me
think that it's either a limitation coming from my firmware or from
EGL/KMS itself rather than a bug with my code. Nonetheless, I still
left (untestable) VT switching code in place, in case it's useful to
someone else.
- The mode_id, connector_id and device_path should be configurable for
power users and people who wish to watch videos on nonprimary screen.
Unfortunately I didn't see anything that would allow OpenGL backends
to register their own set of options. At the same time, adding them to
global namespace is pointless.
- A few dozens of lines could be shared with vo_drm (setting up VT
switching, most of code behind page flipping). I don't have any strong
opinion on this.
- Sometimes I get minor visual glitches. I'm not sure if there's a race
condition of some sort, unitialized variable (doubtful), or if it's
buggy driver. (I'm using integrated Intel HD Graphics 4400 with Mesa)
- .config and .control are very minimal.
Signed-off-by: wm4 <wm4@nowhere>
2015-11-07 18:06:57 +00:00
|
|
|
}
|
|
|
|
|
2017-10-23 15:51:49 +00:00
|
|
|
p->drm_params.fd = p->kms->fd;
|
|
|
|
p->drm_params.crtc_id = p->kms->crtc_id;
|
2018-03-17 07:21:56 +00:00
|
|
|
p->drm_params.connector_id = p->kms->connector->connector_id;
|
2017-11-08 20:57:16 +00:00
|
|
|
if (p->kms->atomic_context)
|
2018-04-29 13:09:16 +00:00
|
|
|
p->drm_params.atomic_request_ptr = &p->kms->atomic_context->request;
|
2018-06-28 13:06:41 +00:00
|
|
|
char *rendernode_path = drmGetRenderDeviceNameFromFd(p->kms->fd);
|
|
|
|
if (rendernode_path) {
|
|
|
|
MP_VERBOSE(ctx, "Opening render node \"%s\"\n", rendernode_path);
|
|
|
|
p->drm_params.render_fd = open(rendernode_path, O_RDWR | O_CLOEXEC);
|
2019-09-12 19:00:50 +00:00
|
|
|
if (p->drm_params.render_fd == -1) {
|
2018-06-28 13:06:41 +00:00
|
|
|
MP_WARN(ctx, "Cannot open render node \"%s\": %s. VAAPI hwdec will be disabled\n",
|
|
|
|
rendernode_path, mp_strerror(errno));
|
|
|
|
}
|
|
|
|
free(rendernode_path);
|
|
|
|
} else {
|
|
|
|
p->drm_params.render_fd = -1;
|
|
|
|
MP_VERBOSE(ctx, "Could not find path to render node. VAAPI hwdec will be disabled\n");
|
|
|
|
}
|
|
|
|
|
vo_opengl: refactor into vo_gpu
This is done in several steps:
1. refactor MPGLContext -> struct ra_ctx
2. move GL-specific stuff in vo_opengl into opengl/context.c
3. generalize context creation to support other APIs, and add --gpu-api
4. rename all of the --opengl- options that are no longer opengl-specific
5. move all of the stuff from opengl/* that isn't GL-specific into gpu/
(note: opengl/gl_utils.h became opengl/utils.h)
6. rename vo_opengl to vo_gpu
7. to handle window screenshots, the short-term approach was to just add
it to ra_swchain_fns. Long term (and for vulkan) this has to be moved to
ra itself (and vo_gpu altered to compensate), but this was a stop-gap
measure to prevent this commit from getting too big
8. move ra->fns->flush to ra_gl_ctx instead
9. some other minor changes that I've probably already forgotten
Note: This is one half of a major refactor, the other half of which is
provided by rossy's following commit. This commit enables support for
all linux platforms, while his version enables support for all non-linux
platforms.
Note 2: vo_opengl_cb.c also re-uses ra_gl_ctx so it benefits from the
--opengl- options like --opengl-early-flush, --opengl-finish etc. Should
be a strict superset of the old functionality.
Disclaimer: Since I have no way of compiling mpv on all platforms, some
of these ports were done blindly. Specifically, the blind ports included
context_mali_fbdev.c and context_rpi.c. Since they're both based on
egl_helpers, the port should have gone smoothly without any major
changes required. But if somebody complains about a compile error on
those platforms (assuming anybody actually uses them), you know where to
complain.
2017-09-14 06:04:55 +00:00
|
|
|
struct ra_gl_ctx_params params = {
|
2018-11-27 17:39:16 +00:00
|
|
|
.external_swapchain = &drm_egl_swapchain,
|
2018-12-08 20:47:18 +00:00
|
|
|
.get_vsync = &drm_egl_get_vsync,
|
vo_opengl: refactor into vo_gpu
This is done in several steps:
1. refactor MPGLContext -> struct ra_ctx
2. move GL-specific stuff in vo_opengl into opengl/context.c
3. generalize context creation to support other APIs, and add --gpu-api
4. rename all of the --opengl- options that are no longer opengl-specific
5. move all of the stuff from opengl/* that isn't GL-specific into gpu/
(note: opengl/gl_utils.h became opengl/utils.h)
6. rename vo_opengl to vo_gpu
7. to handle window screenshots, the short-term approach was to just add
it to ra_swchain_fns. Long term (and for vulkan) this has to be moved to
ra itself (and vo_gpu altered to compensate), but this was a stop-gap
measure to prevent this commit from getting too big
8. move ra->fns->flush to ra_gl_ctx instead
9. some other minor changes that I've probably already forgotten
Note: This is one half of a major refactor, the other half of which is
provided by rossy's following commit. This commit enables support for
all linux platforms, while his version enables support for all non-linux
platforms.
Note 2: vo_opengl_cb.c also re-uses ra_gl_ctx so it benefits from the
--opengl- options like --opengl-early-flush, --opengl-finish etc. Should
be a strict superset of the old functionality.
Disclaimer: Since I have no way of compiling mpv on all platforms, some
of these ports were done blindly. Specifically, the blind ports included
context_mali_fbdev.c and context_rpi.c. Since they're both based on
egl_helpers, the port should have gone smoothly without any major
changes required. But if somebody complains about a compile error on
those platforms (assuming anybody actually uses them), you know where to
complain.
2017-09-14 06:04:55 +00:00
|
|
|
};
|
|
|
|
if (!ra_gl_ctx_init(ctx, &p->gl, params))
|
|
|
|
return false;
|
vo_opengl: add DRM EGL backend
Notes:
- Unfortunately the only way to talk to EGL from within DRM I could find
involves linking with GBM (generic buffer management for Mesa.)
Because of this, I'm pretty sure it won't work with proprietary NVidia
drivers, but then again, last time I checked NVidia didn't offer
proper screen resolution for VT.
- VT switching doesn't seem to work at all. It's worth mentioning that
using vo_drm before introduction of VT switcher had an anomaly where
user could switch to another VT and input text to it, while video
played on top of that VT. However, that isn't the case with drm_egl:
I can't switch to other VT during playback like this. This makes me
think that it's either a limitation coming from my firmware or from
EGL/KMS itself rather than a bug with my code. Nonetheless, I still
left (untestable) VT switching code in place, in case it's useful to
someone else.
- The mode_id, connector_id and device_path should be configurable for
power users and people who wish to watch videos on nonprimary screen.
Unfortunately I didn't see anything that would allow OpenGL backends
to register their own set of options. At the same time, adding them to
global namespace is pointless.
- A few dozens of lines could be shared with vo_drm (setting up VT
switching, most of code behind page flipping). I don't have any strong
opinion on this.
- Sometimes I get minor visual glitches. I'm not sure if there's a race
condition of some sort, unitialized variable (doubtful), or if it's
buggy driver. (I'm using integrated Intel HD Graphics 4400 with Mesa)
- .config and .control are very minimal.
Signed-off-by: wm4 <wm4@nowhere>
2015-11-07 18:06:57 +00:00
|
|
|
|
2019-09-12 19:00:50 +00:00
|
|
|
ra_add_native_resource(ctx->ra, "drm_params_v2", &p->drm_params);
|
2018-12-01 11:01:17 +00:00
|
|
|
ra_add_native_resource(ctx->ra, "drm_draw_surface_size", &p->draw_surface_size);
|
client API: add a new way to pass X11 Display etc. to render API
Hardware decoding things often need access to additional handles from
the windowing system, such as the X11 or Wayland display when using
vaapi. The opengl-cb had nothing dedicated for this, and used the weird
GL_MP_MPGetNativeDisplay GL extension (which was mpv specific and not
officially registered with OpenGL).
This was awkward, and a pain due to having to emulate GL context
behavior (like needing a TLS variable to store context for the pseudo GL
extension function). In addition (and not inherently due to this), we
could pass only one resource from mpv builtin context backends to
hwdecs. It was also all GL specific.
Replace this with a newer mechanism. It works for all RA backends, not
just GL. the API user can explicitly pass the objects at init time via
mpv_render_context_create(). Multiple resources are naturally possible.
The API uses MPV_RENDER_PARAM_* defines, but internally we use strings.
This is done for 2 reasons: 1. trying to leave libmpv and internal
mechanisms decoupled, 2. not having to add public API for some of the
internal resource types (especially D3D/GL interop stuff).
To remain sane, drop support for obscure half-working opengl-cb things,
like the DRM interop (was missing necessary things), the RPI window
thing (nobody used it), and obscure D3D interop things (not needed with
ANGLE, others were undocumented). In order not to break ABI and the C
API, we don't remove the associated structs from opengl_cb.h.
The parts which are still needed (in particular DRM interop) needs to be
ported to the render API.
2018-03-22 16:05:01 +00:00
|
|
|
|
2018-12-08 20:47:18 +00:00
|
|
|
p->vsync_info.vsync_duration = 0;
|
|
|
|
p->vsync_info.skipped_vsyncs = -1;
|
|
|
|
p->vsync_info.last_queue_display_time = -1;
|
|
|
|
|
vo_opengl: refactor into vo_gpu
This is done in several steps:
1. refactor MPGLContext -> struct ra_ctx
2. move GL-specific stuff in vo_opengl into opengl/context.c
3. generalize context creation to support other APIs, and add --gpu-api
4. rename all of the --opengl- options that are no longer opengl-specific
5. move all of the stuff from opengl/* that isn't GL-specific into gpu/
(note: opengl/gl_utils.h became opengl/utils.h)
6. rename vo_opengl to vo_gpu
7. to handle window screenshots, the short-term approach was to just add
it to ra_swchain_fns. Long term (and for vulkan) this has to be moved to
ra itself (and vo_gpu altered to compensate), but this was a stop-gap
measure to prevent this commit from getting too big
8. move ra->fns->flush to ra_gl_ctx instead
9. some other minor changes that I've probably already forgotten
Note: This is one half of a major refactor, the other half of which is
provided by rossy's following commit. This commit enables support for
all linux platforms, while his version enables support for all non-linux
platforms.
Note 2: vo_opengl_cb.c also re-uses ra_gl_ctx so it benefits from the
--opengl- options like --opengl-early-flush, --opengl-finish etc. Should
be a strict superset of the old functionality.
Disclaimer: Since I have no way of compiling mpv on all platforms, some
of these ports were done blindly. Specifically, the blind ports included
context_mali_fbdev.c and context_rpi.c. Since they're both based on
egl_helpers, the port should have gone smoothly without any major
changes required. But if somebody complains about a compile error on
those platforms (assuming anybody actually uses them), you know where to
complain.
2017-09-14 06:04:55 +00:00
|
|
|
return true;
|
2016-09-27 14:29:22 +00:00
|
|
|
}
|
|
|
|
|
vo_opengl: refactor into vo_gpu
This is done in several steps:
1. refactor MPGLContext -> struct ra_ctx
2. move GL-specific stuff in vo_opengl into opengl/context.c
3. generalize context creation to support other APIs, and add --gpu-api
4. rename all of the --opengl- options that are no longer opengl-specific
5. move all of the stuff from opengl/* that isn't GL-specific into gpu/
(note: opengl/gl_utils.h became opengl/utils.h)
6. rename vo_opengl to vo_gpu
7. to handle window screenshots, the short-term approach was to just add
it to ra_swchain_fns. Long term (and for vulkan) this has to be moved to
ra itself (and vo_gpu altered to compensate), but this was a stop-gap
measure to prevent this commit from getting too big
8. move ra->fns->flush to ra_gl_ctx instead
9. some other minor changes that I've probably already forgotten
Note: This is one half of a major refactor, the other half of which is
provided by rossy's following commit. This commit enables support for
all linux platforms, while his version enables support for all non-linux
platforms.
Note 2: vo_opengl_cb.c also re-uses ra_gl_ctx so it benefits from the
--opengl- options like --opengl-early-flush, --opengl-finish etc. Should
be a strict superset of the old functionality.
Disclaimer: Since I have no way of compiling mpv on all platforms, some
of these ports were done blindly. Specifically, the blind ports included
context_mali_fbdev.c and context_rpi.c. Since they're both based on
egl_helpers, the port should have gone smoothly without any major
changes required. But if somebody complains about a compile error on
those platforms (assuming anybody actually uses them), you know where to
complain.
2017-09-14 06:04:55 +00:00
|
|
|
static bool drm_egl_reconfig(struct ra_ctx *ctx)
|
vo_opengl: add DRM EGL backend
Notes:
- Unfortunately the only way to talk to EGL from within DRM I could find
involves linking with GBM (generic buffer management for Mesa.)
Because of this, I'm pretty sure it won't work with proprietary NVidia
drivers, but then again, last time I checked NVidia didn't offer
proper screen resolution for VT.
- VT switching doesn't seem to work at all. It's worth mentioning that
using vo_drm before introduction of VT switcher had an anomaly where
user could switch to another VT and input text to it, while video
played on top of that VT. However, that isn't the case with drm_egl:
I can't switch to other VT during playback like this. This makes me
think that it's either a limitation coming from my firmware or from
EGL/KMS itself rather than a bug with my code. Nonetheless, I still
left (untestable) VT switching code in place, in case it's useful to
someone else.
- The mode_id, connector_id and device_path should be configurable for
power users and people who wish to watch videos on nonprimary screen.
Unfortunately I didn't see anything that would allow OpenGL backends
to register their own set of options. At the same time, adding them to
global namespace is pointless.
- A few dozens of lines could be shared with vo_drm (setting up VT
switching, most of code behind page flipping). I don't have any strong
opinion on this.
- Sometimes I get minor visual glitches. I'm not sure if there's a race
condition of some sort, unitialized variable (doubtful), or if it's
buggy driver. (I'm using integrated Intel HD Graphics 4400 with Mesa)
- .config and .control are very minimal.
Signed-off-by: wm4 <wm4@nowhere>
2015-11-07 18:06:57 +00:00
|
|
|
{
|
|
|
|
struct priv *p = ctx->priv;
|
2017-10-05 21:44:54 +00:00
|
|
|
ctx->vo->dwidth = p->fb->width;
|
|
|
|
ctx->vo->dheight = p->fb->height;
|
|
|
|
ra_gl_ctx_resize(ctx->swapchain, p->fb->width, p->fb->height, 0);
|
vo_opengl: refactor into vo_gpu
This is done in several steps:
1. refactor MPGLContext -> struct ra_ctx
2. move GL-specific stuff in vo_opengl into opengl/context.c
3. generalize context creation to support other APIs, and add --gpu-api
4. rename all of the --opengl- options that are no longer opengl-specific
5. move all of the stuff from opengl/* that isn't GL-specific into gpu/
(note: opengl/gl_utils.h became opengl/utils.h)
6. rename vo_opengl to vo_gpu
7. to handle window screenshots, the short-term approach was to just add
it to ra_swchain_fns. Long term (and for vulkan) this has to be moved to
ra itself (and vo_gpu altered to compensate), but this was a stop-gap
measure to prevent this commit from getting too big
8. move ra->fns->flush to ra_gl_ctx instead
9. some other minor changes that I've probably already forgotten
Note: This is one half of a major refactor, the other half of which is
provided by rossy's following commit. This commit enables support for
all linux platforms, while his version enables support for all non-linux
platforms.
Note 2: vo_opengl_cb.c also re-uses ra_gl_ctx so it benefits from the
--opengl- options like --opengl-early-flush, --opengl-finish etc. Should
be a strict superset of the old functionality.
Disclaimer: Since I have no way of compiling mpv on all platforms, some
of these ports were done blindly. Specifically, the blind ports included
context_mali_fbdev.c and context_rpi.c. Since they're both based on
egl_helpers, the port should have gone smoothly without any major
changes required. But if somebody complains about a compile error on
those platforms (assuming anybody actually uses them), you know where to
complain.
2017-09-14 06:04:55 +00:00
|
|
|
return true;
|
vo_opengl: add DRM EGL backend
Notes:
- Unfortunately the only way to talk to EGL from within DRM I could find
involves linking with GBM (generic buffer management for Mesa.)
Because of this, I'm pretty sure it won't work with proprietary NVidia
drivers, but then again, last time I checked NVidia didn't offer
proper screen resolution for VT.
- VT switching doesn't seem to work at all. It's worth mentioning that
using vo_drm before introduction of VT switcher had an anomaly where
user could switch to another VT and input text to it, while video
played on top of that VT. However, that isn't the case with drm_egl:
I can't switch to other VT during playback like this. This makes me
think that it's either a limitation coming from my firmware or from
EGL/KMS itself rather than a bug with my code. Nonetheless, I still
left (untestable) VT switching code in place, in case it's useful to
someone else.
- The mode_id, connector_id and device_path should be configurable for
power users and people who wish to watch videos on nonprimary screen.
Unfortunately I didn't see anything that would allow OpenGL backends
to register their own set of options. At the same time, adding them to
global namespace is pointless.
- A few dozens of lines could be shared with vo_drm (setting up VT
switching, most of code behind page flipping). I don't have any strong
opinion on this.
- Sometimes I get minor visual glitches. I'm not sure if there's a race
condition of some sort, unitialized variable (doubtful), or if it's
buggy driver. (I'm using integrated Intel HD Graphics 4400 with Mesa)
- .config and .control are very minimal.
Signed-off-by: wm4 <wm4@nowhere>
2015-11-07 18:06:57 +00:00
|
|
|
}
|
|
|
|
|
vo_opengl: refactor into vo_gpu
This is done in several steps:
1. refactor MPGLContext -> struct ra_ctx
2. move GL-specific stuff in vo_opengl into opengl/context.c
3. generalize context creation to support other APIs, and add --gpu-api
4. rename all of the --opengl- options that are no longer opengl-specific
5. move all of the stuff from opengl/* that isn't GL-specific into gpu/
(note: opengl/gl_utils.h became opengl/utils.h)
6. rename vo_opengl to vo_gpu
7. to handle window screenshots, the short-term approach was to just add
it to ra_swchain_fns. Long term (and for vulkan) this has to be moved to
ra itself (and vo_gpu altered to compensate), but this was a stop-gap
measure to prevent this commit from getting too big
8. move ra->fns->flush to ra_gl_ctx instead
9. some other minor changes that I've probably already forgotten
Note: This is one half of a major refactor, the other half of which is
provided by rossy's following commit. This commit enables support for
all linux platforms, while his version enables support for all non-linux
platforms.
Note 2: vo_opengl_cb.c also re-uses ra_gl_ctx so it benefits from the
--opengl- options like --opengl-early-flush, --opengl-finish etc. Should
be a strict superset of the old functionality.
Disclaimer: Since I have no way of compiling mpv on all platforms, some
of these ports were done blindly. Specifically, the blind ports included
context_mali_fbdev.c and context_rpi.c. Since they're both based on
egl_helpers, the port should have gone smoothly without any major
changes required. But if somebody complains about a compile error on
those platforms (assuming anybody actually uses them), you know where to
complain.
2017-09-14 06:04:55 +00:00
|
|
|
static int drm_egl_control(struct ra_ctx *ctx, int *events, int request,
|
vo_opengl: add DRM EGL backend
Notes:
- Unfortunately the only way to talk to EGL from within DRM I could find
involves linking with GBM (generic buffer management for Mesa.)
Because of this, I'm pretty sure it won't work with proprietary NVidia
drivers, but then again, last time I checked NVidia didn't offer
proper screen resolution for VT.
- VT switching doesn't seem to work at all. It's worth mentioning that
using vo_drm before introduction of VT switcher had an anomaly where
user could switch to another VT and input text to it, while video
played on top of that VT. However, that isn't the case with drm_egl:
I can't switch to other VT during playback like this. This makes me
think that it's either a limitation coming from my firmware or from
EGL/KMS itself rather than a bug with my code. Nonetheless, I still
left (untestable) VT switching code in place, in case it's useful to
someone else.
- The mode_id, connector_id and device_path should be configurable for
power users and people who wish to watch videos on nonprimary screen.
Unfortunately I didn't see anything that would allow OpenGL backends
to register their own set of options. At the same time, adding them to
global namespace is pointless.
- A few dozens of lines could be shared with vo_drm (setting up VT
switching, most of code behind page flipping). I don't have any strong
opinion on this.
- Sometimes I get minor visual glitches. I'm not sure if there's a race
condition of some sort, unitialized variable (doubtful), or if it's
buggy driver. (I'm using integrated Intel HD Graphics 4400 with Mesa)
- .config and .control are very minimal.
Signed-off-by: wm4 <wm4@nowhere>
2015-11-07 18:06:57 +00:00
|
|
|
void *arg)
|
|
|
|
{
|
2016-09-24 12:59:31 +00:00
|
|
|
struct priv *p = ctx->priv;
|
|
|
|
switch (request) {
|
|
|
|
case VOCTRL_GET_DISPLAY_FPS: {
|
2016-10-03 21:56:35 +00:00
|
|
|
double fps = kms_get_display_fps(p->kms);
|
2016-09-24 12:59:31 +00:00
|
|
|
if (fps <= 0)
|
|
|
|
break;
|
|
|
|
*(double*)arg = fps;
|
|
|
|
return VO_TRUE;
|
|
|
|
}
|
2018-11-27 17:39:16 +00:00
|
|
|
case VOCTRL_PAUSE:
|
|
|
|
ctx->vo->want_redraw = true;
|
|
|
|
p->paused = true;
|
|
|
|
return VO_TRUE;
|
|
|
|
case VOCTRL_RESUME:
|
|
|
|
p->paused = false;
|
2018-12-08 20:47:18 +00:00
|
|
|
p->vsync_info.last_queue_display_time = -1;
|
|
|
|
p->vsync_info.skipped_vsyncs = 0;
|
|
|
|
p->vsync.ust = 0;
|
|
|
|
p->vsync.msc = 0;
|
2018-11-27 17:39:16 +00:00
|
|
|
return VO_TRUE;
|
2016-09-24 12:59:31 +00:00
|
|
|
}
|
vo_opengl: add DRM EGL backend
Notes:
- Unfortunately the only way to talk to EGL from within DRM I could find
involves linking with GBM (generic buffer management for Mesa.)
Because of this, I'm pretty sure it won't work with proprietary NVidia
drivers, but then again, last time I checked NVidia didn't offer
proper screen resolution for VT.
- VT switching doesn't seem to work at all. It's worth mentioning that
using vo_drm before introduction of VT switcher had an anomaly where
user could switch to another VT and input text to it, while video
played on top of that VT. However, that isn't the case with drm_egl:
I can't switch to other VT during playback like this. This makes me
think that it's either a limitation coming from my firmware or from
EGL/KMS itself rather than a bug with my code. Nonetheless, I still
left (untestable) VT switching code in place, in case it's useful to
someone else.
- The mode_id, connector_id and device_path should be configurable for
power users and people who wish to watch videos on nonprimary screen.
Unfortunately I didn't see anything that would allow OpenGL backends
to register their own set of options. At the same time, adding them to
global namespace is pointless.
- A few dozens of lines could be shared with vo_drm (setting up VT
switching, most of code behind page flipping). I don't have any strong
opinion on this.
- Sometimes I get minor visual glitches. I'm not sure if there's a race
condition of some sort, unitialized variable (doubtful), or if it's
buggy driver. (I'm using integrated Intel HD Graphics 4400 with Mesa)
- .config and .control are very minimal.
Signed-off-by: wm4 <wm4@nowhere>
2015-11-07 18:06:57 +00:00
|
|
|
return VO_NOTIMPL;
|
|
|
|
}
|
|
|
|
|
2018-02-24 17:53:16 +00:00
|
|
|
static void wait_events(struct ra_ctx *ctx, int64_t until_time_us)
|
|
|
|
{
|
|
|
|
struct priv *p = ctx->priv;
|
|
|
|
if (p->vt_switcher_active) {
|
|
|
|
int64_t wait_us = until_time_us - mp_time_us();
|
|
|
|
int timeout_ms = MPCLAMP((wait_us + 500) / 1000, 0, 10000);
|
|
|
|
vt_switcher_poll(&p->vt_switcher, timeout_ms);
|
|
|
|
} else {
|
|
|
|
vo_wait_default(ctx->vo, until_time_us);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static void wakeup(struct ra_ctx *ctx)
|
|
|
|
{
|
|
|
|
struct priv *p = ctx->priv;
|
|
|
|
if (p->vt_switcher_active)
|
|
|
|
vt_switcher_interrupt_poll(&p->vt_switcher);
|
|
|
|
}
|
|
|
|
|
vo_opengl: refactor into vo_gpu
This is done in several steps:
1. refactor MPGLContext -> struct ra_ctx
2. move GL-specific stuff in vo_opengl into opengl/context.c
3. generalize context creation to support other APIs, and add --gpu-api
4. rename all of the --opengl- options that are no longer opengl-specific
5. move all of the stuff from opengl/* that isn't GL-specific into gpu/
(note: opengl/gl_utils.h became opengl/utils.h)
6. rename vo_opengl to vo_gpu
7. to handle window screenshots, the short-term approach was to just add
it to ra_swchain_fns. Long term (and for vulkan) this has to be moved to
ra itself (and vo_gpu altered to compensate), but this was a stop-gap
measure to prevent this commit from getting too big
8. move ra->fns->flush to ra_gl_ctx instead
9. some other minor changes that I've probably already forgotten
Note: This is one half of a major refactor, the other half of which is
provided by rossy's following commit. This commit enables support for
all linux platforms, while his version enables support for all non-linux
platforms.
Note 2: vo_opengl_cb.c also re-uses ra_gl_ctx so it benefits from the
--opengl- options like --opengl-early-flush, --opengl-finish etc. Should
be a strict superset of the old functionality.
Disclaimer: Since I have no way of compiling mpv on all platforms, some
of these ports were done blindly. Specifically, the blind ports included
context_mali_fbdev.c and context_rpi.c. Since they're both based on
egl_helpers, the port should have gone smoothly without any major
changes required. But if somebody complains about a compile error on
those platforms (assuming anybody actually uses them), you know where to
complain.
2017-09-14 06:04:55 +00:00
|
|
|
const struct ra_ctx_fns ra_ctx_drm_egl = {
|
|
|
|
.type = "opengl",
|
2016-09-27 14:29:22 +00:00
|
|
|
.name = "drm",
|
|
|
|
.reconfig = drm_egl_reconfig,
|
vo_opengl: add DRM EGL backend
Notes:
- Unfortunately the only way to talk to EGL from within DRM I could find
involves linking with GBM (generic buffer management for Mesa.)
Because of this, I'm pretty sure it won't work with proprietary NVidia
drivers, but then again, last time I checked NVidia didn't offer
proper screen resolution for VT.
- VT switching doesn't seem to work at all. It's worth mentioning that
using vo_drm before introduction of VT switcher had an anomaly where
user could switch to another VT and input text to it, while video
played on top of that VT. However, that isn't the case with drm_egl:
I can't switch to other VT during playback like this. This makes me
think that it's either a limitation coming from my firmware or from
EGL/KMS itself rather than a bug with my code. Nonetheless, I still
left (untestable) VT switching code in place, in case it's useful to
someone else.
- The mode_id, connector_id and device_path should be configurable for
power users and people who wish to watch videos on nonprimary screen.
Unfortunately I didn't see anything that would allow OpenGL backends
to register their own set of options. At the same time, adding them to
global namespace is pointless.
- A few dozens of lines could be shared with vo_drm (setting up VT
switching, most of code behind page flipping). I don't have any strong
opinion on this.
- Sometimes I get minor visual glitches. I'm not sure if there's a race
condition of some sort, unitialized variable (doubtful), or if it's
buggy driver. (I'm using integrated Intel HD Graphics 4400 with Mesa)
- .config and .control are very minimal.
Signed-off-by: wm4 <wm4@nowhere>
2015-11-07 18:06:57 +00:00
|
|
|
.control = drm_egl_control,
|
vo_opengl: refactor into vo_gpu
This is done in several steps:
1. refactor MPGLContext -> struct ra_ctx
2. move GL-specific stuff in vo_opengl into opengl/context.c
3. generalize context creation to support other APIs, and add --gpu-api
4. rename all of the --opengl- options that are no longer opengl-specific
5. move all of the stuff from opengl/* that isn't GL-specific into gpu/
(note: opengl/gl_utils.h became opengl/utils.h)
6. rename vo_opengl to vo_gpu
7. to handle window screenshots, the short-term approach was to just add
it to ra_swchain_fns. Long term (and for vulkan) this has to be moved to
ra itself (and vo_gpu altered to compensate), but this was a stop-gap
measure to prevent this commit from getting too big
8. move ra->fns->flush to ra_gl_ctx instead
9. some other minor changes that I've probably already forgotten
Note: This is one half of a major refactor, the other half of which is
provided by rossy's following commit. This commit enables support for
all linux platforms, while his version enables support for all non-linux
platforms.
Note 2: vo_opengl_cb.c also re-uses ra_gl_ctx so it benefits from the
--opengl- options like --opengl-early-flush, --opengl-finish etc. Should
be a strict superset of the old functionality.
Disclaimer: Since I have no way of compiling mpv on all platforms, some
of these ports were done blindly. Specifically, the blind ports included
context_mali_fbdev.c and context_rpi.c. Since they're both based on
egl_helpers, the port should have gone smoothly without any major
changes required. But if somebody complains about a compile error on
those platforms (assuming anybody actually uses them), you know where to
complain.
2017-09-14 06:04:55 +00:00
|
|
|
.init = drm_egl_init,
|
vo_opengl: add DRM EGL backend
Notes:
- Unfortunately the only way to talk to EGL from within DRM I could find
involves linking with GBM (generic buffer management for Mesa.)
Because of this, I'm pretty sure it won't work with proprietary NVidia
drivers, but then again, last time I checked NVidia didn't offer
proper screen resolution for VT.
- VT switching doesn't seem to work at all. It's worth mentioning that
using vo_drm before introduction of VT switcher had an anomaly where
user could switch to another VT and input text to it, while video
played on top of that VT. However, that isn't the case with drm_egl:
I can't switch to other VT during playback like this. This makes me
think that it's either a limitation coming from my firmware or from
EGL/KMS itself rather than a bug with my code. Nonetheless, I still
left (untestable) VT switching code in place, in case it's useful to
someone else.
- The mode_id, connector_id and device_path should be configurable for
power users and people who wish to watch videos on nonprimary screen.
Unfortunately I didn't see anything that would allow OpenGL backends
to register their own set of options. At the same time, adding them to
global namespace is pointless.
- A few dozens of lines could be shared with vo_drm (setting up VT
switching, most of code behind page flipping). I don't have any strong
opinion on this.
- Sometimes I get minor visual glitches. I'm not sure if there's a race
condition of some sort, unitialized variable (doubtful), or if it's
buggy driver. (I'm using integrated Intel HD Graphics 4400 with Mesa)
- .config and .control are very minimal.
Signed-off-by: wm4 <wm4@nowhere>
2015-11-07 18:06:57 +00:00
|
|
|
.uninit = drm_egl_uninit,
|
2018-02-24 17:53:16 +00:00
|
|
|
.wait_events = wait_events,
|
|
|
|
.wakeup = wakeup,
|
vo_opengl: add DRM EGL backend
Notes:
- Unfortunately the only way to talk to EGL from within DRM I could find
involves linking with GBM (generic buffer management for Mesa.)
Because of this, I'm pretty sure it won't work with proprietary NVidia
drivers, but then again, last time I checked NVidia didn't offer
proper screen resolution for VT.
- VT switching doesn't seem to work at all. It's worth mentioning that
using vo_drm before introduction of VT switcher had an anomaly where
user could switch to another VT and input text to it, while video
played on top of that VT. However, that isn't the case with drm_egl:
I can't switch to other VT during playback like this. This makes me
think that it's either a limitation coming from my firmware or from
EGL/KMS itself rather than a bug with my code. Nonetheless, I still
left (untestable) VT switching code in place, in case it's useful to
someone else.
- The mode_id, connector_id and device_path should be configurable for
power users and people who wish to watch videos on nonprimary screen.
Unfortunately I didn't see anything that would allow OpenGL backends
to register their own set of options. At the same time, adding them to
global namespace is pointless.
- A few dozens of lines could be shared with vo_drm (setting up VT
switching, most of code behind page flipping). I don't have any strong
opinion on this.
- Sometimes I get minor visual glitches. I'm not sure if there's a race
condition of some sort, unitialized variable (doubtful), or if it's
buggy driver. (I'm using integrated Intel HD Graphics 4400 with Mesa)
- .config and .control are very minimal.
Signed-off-by: wm4 <wm4@nowhere>
2015-11-07 18:06:57 +00:00
|
|
|
};
|