mpv/configure

860 lines
19 KiB
Plaintext
Raw Normal View History

#!/bin/sh
#
# MPlayer configurator. (C) 2000 Pontscho/fresh!mindworkz
# pontscho@makacs.poliod.hu
#
# Changes in reversed order:
#
# 2000/03/08 by LGB:
# - DGA detection-o-matic :)
# - '--disable-dga' option to force disabling DGA vo driver compiling into mplayer
# - line about '--enable-dga' is added to the help message
#
# 2000/02/26 by A'rpi:
# - added DGA option: --enable-dga
# - no notify if --with-win32libdir used [Tibcu]
#
# 2000/02/25 by LGB:
# - TMPDIR or TEMPDIR variable is honored during tests for temporary files
# - ChangeLog inside configure was reversed ;-)
#
# some changes by A'rpi/ESP-team:
# - added 'athlon' target for the new athlongcc [Ian Kumlien]
# - applied _win32libdir=-L patch by Magnus Pfeffer
#
# some changes by LGB:
# - Ehhh, AMD K6-2 returns with cpuid 5 ;-) Changing back Arpi's last change :)
# More info: AMD K6-2 reports with family 5, duron with 6, so I attached
# much finer CPU type detection based on Linux kernel's one :)
# (k5: 5, model<6, k6: 5, model>=6, k7: 6, model=any)
# - On some exit point (error) temporary files were not deleted. Fixed.
# - $TMP and $TMP2 are renamed to $TMPC and $TMPO ;-)
# - Some useless { ... } are removed
#
# some changes by A'rpi/ESP-team:
# - the --with-win32libdir patch by Aaron Hope applied
# - some english bugfix again :)
# - cpu type selection changed:
# ( k7->k6->k5-> ) || (i686->pentiumpro-> ) pentium-> i486 -> i386 -> error!
# - cpu type for AMD/family=5 changed k6->k5
#
# some changes by LGB (G<>bor L<>n<EFBFBD>rt):
# - SOME gcc may support 'k7', so I added tests for ALL CPU type optimization
# switches with the ability to find out the best optimization for your CPU.
# - Help moved to the begining to avoid tests if user only wants help.
# - A one lined help to indicate detailed help for users
# - Fixed /tmp race (PIDs can be predicted, I added random numbers as well)
#
# some changes by A'rpi/ESP-team:
# - some english bugfix :)
# - removed _??exists flags, _?? is enough...
# - creating only config.mak files instead of whole Makefiles
#
# --
# LGB: Help moved here.
if [ "$1" = "--help" -o "$1" = "-help" -o "$1" = "-h" ]; then
cat << EOF
usage: $0 [options]
params:
--enable-mmx build with mmx support [autodetect]
--enable-3dnow build with 3dnow! support [autodetect]
--enable-sse build with sse support [autodetect]
--enable-gl build with OpenGL render support [autodetect]
--enable-dga build with DGA support [autodetect]
--enable-sdl build with SDL render support [def.: disabled!]
--enable-mga build with mga_vid support [autodetect, if /dev/mga_vid
is available]
--enable-xmga build with mga_vid X Window support [autodetect,
if both /dev/mga_vid and x11 are available]
--enable-xv build with Xv render support for X 4.x [autodetect]
--enable-x11 build with X11 render support [autodetect]
--enable-mlib build with MLIB support ( only Solaris )
--enable-termcap use termcap database for key codes
--enable-xmmp use XMMP audio drivers
--enable-lirc enable LIRC (remote control) support
--with-x11libdir=DIR X library files are in DIR
--with-win32libdir=DIR windows codec files
--size-x=SIZE default screen width
--size-y=SIZE default screen height
EOF
exit 0
fi
# LGB: Some inital help
echo "You can get detailed help on configure with: $0 --help"
echo "Please wait while ./configure discovers your software and hardware environment!"
# LGB: temporary files
TMPC="mplayer-conf-${RANDOM}-$$-${RANDOM}.c"
TMPO="mplayer-conf-${RANDOM}-$$-${RANDOM}.o"
if [ ! -z $TMPDIR ]; then
TMPC="${TMPDIR}/${TMPC}"
TMPO="${TMPDIR}/${TMPO}"
elif [ ! -z $TEMPDIR ]; then
TMPC="${TEMPDIR}/${TMPC}"
TMPO="${TEMPDIR}/${TMPO}"
else
TMPC="/tmp/${TMPC}"
TMPO="/tmp/${TMPO}"
fi
# ---
# config files
CCONF='config.h'
MCONF='config.mak'
# ---
TAB=`echo -n -e "\t"`
pname=`cat /proc/cpuinfo | grep 'model name' | cut -d ':' -f 2`
pparam=`cat /proc/cpuinfo | grep 'features' | cut -d ':' -f 2`
if [ -z "$pparam" ]; then
pparam=`cat /proc/cpuinfo | grep 'flags' | cut -d ':' -f 2`
fi
pvendor=`cat /proc/cpuinfo | grep 'vendor_id' | cut -d ':' -f 2 | cut -d ' ' -f 2`
pfamily=`cat /proc/cpuinfo | grep 'cpu family' | cut -d ':' -f 2 | cut -d ' ' -f 2`
pmodel=`cat /proc/cpuinfo | grep "model$TAB" | cut -d ':' -f 2 | cut -d ' ' -f 2`
pstepping=`cat /proc/cpuinfo | grep 'stepping' | cut -d ':' -f 2 | cut -d ' ' -f 2`
_mmx=no
_3dnow=no
_mtrr=no
_sse=no
_mga=no
_gl=no
_sdl=no
_xv=no
_x11=no
_3dfx=no
_syncfb=no
_mlib=no
_mpg123=no
_xmga=no
_dga=no
_lirc=no
_x=1
_y=1
_gllib=
_sdllib=
_x11lib=
_xvlib=
_xlibdir=
for i in `echo $pparam`; do
case "$i" in
3dnow)
_3dnow=yes
_mpg123=yes
;;
mmx)
_mmx=yes
;;
mtrr)
_mtrr=yes
;;
k6_mtrr)
_mtrr=yes
;;
xmm)
_sse=yes
;;
sse)
_sse=yes
;;
kni)
_sse=yes
;;
esac
done
if [ -e /usr/X11R6 ]; then
_x11libdir=-L/usr/X11R6/lib
else
if [ -e /usr/X11 ]; then
_x11libdir=-L/usr/X11/lib
fi
fi
_win32libdirnotify=no
if [ -e /usr/lib/win32 ]; then
_win32libdir=/usr/lib/win32
else
if [ -e /usr/local/lib/win32 ]; then
_win32libdir=/usr/local/lib/win32
else
# This is our default:
_win32libdir=/usr/lib/win32
_win32libdirnotify=yes
fi
fi
if [ -e /dev/mga_vid ]; then
_mga=yes
_syncfb=yes
fi
proc=pentium
case "$pvendor" in
AuthenticAMD)
case "$pfamily" in
3)
proc=i386
;;
4)
proc=i486
;;
5)
if [ $pmodel -ge 6 ]; then # LGB: models are: K5/SSA5 K5 K5 K5 ? ? K6 K6 K6-2 K6-3
proc=k6
else
proc=k5
fi
;;
6|7) # LGB: Though it seems Athlon CPUs returns with "6"
proc=k7
;;
*)
proc=pentium
;;
esac
;;
GenuineIntel)
case "$pfamily" in
3)
proc=i386
;;
4)
proc=i486
;;
5)
proc=pentium
;;
6)
proc=i686
;;
*)
proc=pentium
;;
esac
;;
unknown) # added by Gabucino - upon Tibcu's request
case "$pfamily" in
3)
proc=i386
;;
4)
proc=i486
;;
*)
proc=pentium
;;
esac
;;
*)
proc=pentium
;;
esac
# ---
cat > $TMPC << EOF
int main( void ) { return 0; }
EOF
# check that gcc supports our cpu, if not, fallback to pentium
# LGB: check -mcpu and -march swithing step by step with enabling
# to fall back till 386.
#echo -n "Checking your GCC CPU optimalization abilities: "
if [ "$proc" = "k7" ]; then
# echo -n "trying k7 "
gcc $TMPC -o $TMPO -march=$proc -mcpu=$proc &> /dev/null || proc=athlon
fi
if [ "$proc" = "athlon" ]; then
# echo -n "trying athlon "
gcc $TMPC -o $TMPO -march=$proc -mcpu=$proc &> /dev/null || proc=k6
fi
if [ "$proc" = "k6" ]; then
# echo -n "trying k6 "
gcc $TMPC -o $TMPO -march=$proc -mcpu=$proc &> /dev/null || proc=k5
fi
if [ "$proc" = "k5" ]; then
# echo -n "trying k5 "
gcc $TMPC -o $TMPO -march=$proc -mcpu=$proc &> /dev/null || proc=pentium
fi
if [ "$proc" = "i686" ]; then
# echo -n "trying i686 "
gcc $TMPC -o $TMPO -march=$proc -mcpu=$proc &> /dev/null || proc=pentiumpro
fi
if [ "$proc" = "pentiumpro" ]; then
# echo -n "trying pentiumpro "
gcc $TMPC -o $TMPO -march=$proc -mcpu=$proc &> /dev/null || proc=pentium
fi
if [ "$proc" = "pentium" ]; then
# echo -n "trying pentium "
gcc $TMPC -o $TMPO -march=$proc -mcpu=$proc &> /dev/null || proc=i486
fi
if [ "$proc" = "i486" ]; then
# echo -n "trying i486 "
gcc $TMPC -o $TMPO -march=$proc -mcpu=$proc &> /dev/null || proc=i386
fi
if [ "$proc" = "i386" ]; then
# echo -n "trying i386 "
gcc $TMPC -o $TMPO -march=$proc -mcpu=$proc &> /dev/null || proc=error
fi
if [ "$proc" = "error" ]; then
echo
echo "Your gcc does not support even \"i386\" for '-march' and '-mcpu'." >&2
rm -f $TMPC $TMPO
exit
fi
#echo "DONE (${proc})."
# check GL & X11 & Xext & Xv & SDL & termcap libs
gcc $TMPC -o $TMPO $_x11libdir/ -lGL &> /dev/null && _gl=yes
gcc $TMPC -o $TMPO $_x11libdir -lX11 -lXext &> /dev/null && _x11=yes
gcc $TMPC -o $TMPO $_x11libdir -lXv &> /dev/null && _xv=yes
gcc $TMPC -o $TMPO $_x11libdir -L/usr/local/lib/ -lpthread &> /dev/null || \
{ echo "Lib pthread not found."; rm -f $TMPC $TMPO ; exit 1; }
# SDL disabled by default (0.11pre22-) because of the compilation problems
# this is very buggy & experimental code, use it only if you really need it!!
_have_sdl=no
gcc $TMPC -o $TMPO $_x11libdir -L/usr/local/lib/ -lSDL -lpthread &> /dev/null && _have_sdl=yes
_termcap=no
gcc $TMPC -o $TMPO -ltermcap &> /dev/null && _termcap=yes
_binutils=no
as libac3/downmix/downmix_i386.S -o $TMPO &> /dev/null && _binutils=yes
# LGB: Check DGA
cat > $TMPC << EOF
#include <stdio.h>
#include <X11/Xlib.h>
#include <X11/extensions/xf86dga.h>
int main (void) { return 0;}
EOF
_dga=no
gcc $TMPC -o $TMPO -L/usr/X11R6/lib -L/usr/X11/lib -lX11 -lXext -lXxf86dga -lXxf86vm &> /dev/null && _dga=yes
# Note: the -lXxf86vm library is the VideoMode extension and though it's
# not needed for DGA, AFAIK every distribution packages together with DGA
# stuffs named 'X extensions' or something similar. This check can be usefull
# for further mplayer versions to set resolution by mplayer itself.
# If you run into problems, remove '-lXxf86vm'.
# ---
cat > $TMPC << EOF
#include <GL/gl.h>
int main( void ) { return 0; }
EOF
gcc $TMPC -o $TMPO $_x11libdir/ -lGL &> /dev/null || \
{ _gl=no; echo "GL includes not found!";}
rm -f $TMPC $TMPO
if [ $_x11 = 'yes' ]; then
if [ $_mga = 'yes' ]; then
_xmga=yes
fi
fi
# ---
# check for the parameters.
for ac_option
do
case "$ac_option" in
--enable-sse)
_sse=yes
;;
--enable-3dnow)
_3dnow=yes
;;
--enable-mmx)
_mmx=yes
;;
--enable-mtrr)
_mtrr=yes
;;
--enable-gl)
_gl=yes
;;
--enable-sdl)
_sdl=yes
;;
--enable-mga)
_mga=yes
;;
--enable-xmga)
_xmga=yes
;;
--enable-dga)
_dga=yes
;;
--enable-xv)
_xv=yes
;;
--enable-x11)
_x11=yes
;;
--enable-3dfx)
_3dfx=yes
;;
--enable-syncfb)
_syncfb=yes
;;
--enable-mlib)
_mlib=yes
;;
--enable-termcap)
_termcap=yes
;;
--enable-xmmp)
_xmmp=yes
;;
--enable-lirc)
_lirc=yes
;;
--disable-sse)
_sse=no
;;
--disable-3dnow)
_3dnow=no
;;
--disable-mmx)
_mmx=no
;;
--disable-mtrr)
_mtrr=no
;;
--disable-gl)
_gl=no
;;
--disable-sdl)
_sdl=no
;;
--disable-mga)
_mga=no
;;
--disable-xmga)
_xmga=no
;;
--disable-xv)
_xv=no
;;
--disable-x11)
_x11=no
;;
--disable-mlib)
_mlib=no
;;
--disable-dga)
_dga=no
;;
--disable-termcap)
_termcap=no
;;
--with-x11libdir=*)
_x11libdir=-L`echo $ac_option | cut -d '=' -f 2`
;;
--with-win32libdir=*)
_win32libdir=`echo $ac_option | cut -d '=' -f 2`
_win32libdirnotify=no
;;
--size-x=*)
_x=`echo $ac_option | cut -d '=' -f 2`
;;
--size-y=*)
_y=`echo $ac_option | cut -d '=' -f 2`
;;
esac
done
# to screen.
echo "Checking for cpu vendor ... $pvendor ( $pfamily:$pmodel:$pstepping )"
echo "Checking for cpu type ... $pname"
echo "Optimizing to ... $proc"
echo "Checking for mmx support ... $_mmx"
echo "Checking for 3dnow support ... $_3dnow"
echo "Checking for sse support ... $_sse"
echo "Checking for mtrr support ... $_mtrr"
echo "Screen size ... ${_x}x${_y}"
echo "Checking for X11 libs ... $_x11libdir"
echo "Checking mga_vid device ... $_mga"
echo "Checking for xmga ... $_xmga"
echo "Checking for SDL ... $_sdl"
echo "Checking for OpenGL ... $_gl"
echo "Checking for Xv ... $_xv"
echo "Checking for X11 ... $_x11"
echo "Checking for DGA ... $_dga"
# write conf files.
if [ $_gl = yes ]; then
_gllib='-lGL'
fi
if [ $_x11 = yes ]; then
_x11lib='-lX11 -lXext'
fi
if [ $_xv = yes ]; then
_xvlib='-lXv'
fi
if [ $_sdl = yes ]; then
_sdllib='-lSDL -lpthread'
fi
if [ $_dga = yes ]; then
_dgalib='-lXxf86dga'
fi
if [ "$_termcap" = "yes" ]; then
_termcap='#define USE_TERMCAP'
_libtermcap='-ltermcap'
else
_termcap='#undef USE_TERMCAP'
_libtermcap=''
fi
if [ "$_xmmp" = "yes" ]; then
_xmmpaudio='#define USE_XMMP_AUDIO'
_xmmplibs='-Llibxmm -lxmm'
else
_xmmpaudio='#undef USE_XMMP_AUDIO'
fi
if [ "$_lirc" = "yes" ]; then
_lircdefs='#define HAVE_LIRC'
_lirclibs='-llirc_client'
else
_lircdefs='#undef HAVE_LIRC'
_lirclibs=''
fi
echo
echo "Creating $MCONF"
cat > $MCONF << EOF
# -------- Generated by ./configure -----------
AR=ar
CC=gcc
# OPTFLAGS=-O4 -march=$proc -mcpu=$proc -pipe -fomit-frame-pointer -ffast-math
OPTFLAGS=-O4 -march=$proc -mcpu=$proc -pipe -ffast-math
# LIBS=-L/usr/lib -L/usr/local/lib $_x11libdir $_gllib $_sdllib $_dgalib $_x11lib $_xvlib
X_LIBS=$_x11libdir $_gllib $_sdllib $_dgalib $_x11lib $_xvlib
TERMCAP_LIB=$_libtermcap
XMM_LIBS = $_xmmplibs
LIRC_LIBS = $_lirclibs
WIN32_PATH=-DWIN32_PATH=\"$_win32libdir\"
EOF
# echo 'CFLAGS=$(OPTFLAGS) -Wall -DMPG12PLAY' >> config.mak
echo "Creating $CCONF"
if [ "$_mmx" = "yes" ]; then
_mmx='#define HAVE_MMX'
else
_mmx='#undef HAVE_MMX'
fi
if [ $_3dnow = yes ]; then
_3dnowm='#define HAVE_3DNOW'
else
_3dnowm='#undef HAVE_3DNOW'
fi
if [ $_sse = yes ]; then
_ssem='#define HAVE_SSE'
else
_ssem='#undef HAVE_SSE'
fi
# ---
_vosrc=''
if [ $_mlib = yes ]; then
_mlib='#define HAVE_MLIB'
_vosrc=$_vosrc' yuv2rgb_mlib.c'
else
_mlib='#undef HAVE_MLIB'
fi
# ---
if [ $_gl = yes ]; then
_gl='#define HAVE_GL'
_vosrc=$_vosrc' vo_gl.c'
else
_gl='#undef HAVE_GL'
fi
if [ $_sdl = yes ]; then
_sdldef='#define HAVE_SDL'
_vosrc=$_vosrc' vo_sdl.c'
else
_sdldef='#undef HAVE_SDL'
fi
if [ $_x11 = yes ]; then
_x11='#define HAVE_X11'
_vosrc=$_vosrc' vo_x11.c'
else
_x11='#undef HAVE_X11'
fi
if [ $_xv = yes ]; then
_xv='#define HAVE_XV'
_vosrc=$_vosrc' vo_xv.c'
else
_xv='#undef HAVE_XV'
fi
# ---
if [ $_mga = yes ]; then
_mga='#define HAVE_MGA'
_vosrc=$_vosrc' vo_mga.c'
else
_mga='#undef HAVE_MGA'
fi
if [ $_xmga = yes ]; then
_vosrc=$_vosrc' vo_xmga.c'
fi
if [ $_syncfb = yes ]; then
_syncfb='#define HAVE_SYNCFB'
_vosrc=$_vosrc' vo_syncfb.c'
else
_syncfb='#undef HAVE_SYNCFB'
fi
if [ $_3dfx = yes ]; then
_3dfx='#define HAVE_3DFX'
_vosrc=$_vosrc' vo_3dfx.c'
else
_3dfx='#undef HAVE_3DFX'
fi
if [ $_dga = yes ]; then
_dga='#define HAVE_DGA'
_vosrc=$_vosrc' vo_dga.c vo_fsdga.c'
else
_dga='#undef HAVE_DGA'
fi
if [ $_mpg123 = yes ]; then
_mpg123='#define DEFAULT_MPG123'
else
_mpg123='#undef DEFAULT_MPG123'
fi
cat > $CCONF << EOF
/* -------- Generated by ./configure ----------- */
/* Define this to enable avg. byte/sec-based AVI sync method by default:
(use -bps or -nobps commandline option for run-time method selection) */
#undef AVI_SYNC_BPS
/* Undefine this if you want soundcard-only timing by default:
You can still change this with the -alsa or -noalsa command-line option!
(This function was originally impemented to solve ALSA driver's big
buffer problems, but it seems to be useful for every soundcard drivers) */
#define ALSA_TIMER
/* Undefine this if your soundcard driver has no working select().
If you have kernel Oops, player hangups, or just no audio, you should
try to recompile MPlayer with this option disabled! */
#define HAVE_AUDIO_SELECT
/* You have a choice for MP3 decoding: mp3lib(mpg123) or Win32(l3codeca.acm)
#define this if you prefer mpg123 (with 3Dnow! support) than l3codeca.acm
(with mmx/sse optimizations)
You can still change it runtime using -afm 1 (mpg123) or -afm 4 (l3codeca)*/
$_mpg123
/* XMMP support: (test code) */
$_xmmpaudio
#define LIBDIR "/usr/local/lib"
#define PLUGINDIR LIBDIR "/xmmp/Plugins"
#define XMMP_AUDIO_DRIVER PLUGINDIR "/Sound/oss.so"
/* LIRC (remote control, see www.lirc.org) support: */
$_lircdefs
/* Define this to enable MPEG 1/2 image postprocessing (requires FAST cpu!) */
#define MPEG12_POSTPROC
/* Define if your processor stores words with the most significant
byte first (like Motorola and SPARC, unlike Intel and VAX). */
/* #define WORDS_BIGENDIAN */
#define ARCH_X86
/////////////////////////////////////////////////////////////////////////////
//
// NOTE: Instead of modifying these here, use the --enable/--disable options
// of the ./configure script! See ./configure --help for details.
//
/////////////////////////////////////////////////////////////////////////////
/* termcap flag for getch2.c */
$_termcap
/* Extension defines */
$_mlib // available only on solaris
$_3dnowm // only define if you have 3DNOW (AMD k6-2, AMD Athlon, iDT WinChip, etc.)
$_mmx // only define if you have MMX
$_ssem // only define if you have SSE (Intel Pentium III or Celeron II)
/* libvo options */
#define SCREEN_SIZE_X $_x
#define SCREEN_SIZE_Y $_y
$_x11
$_xv
$_gl
$_dga
$_sdldef
$_3dfx
$_mga
$_syncfb
#if defined(HAVE_GL)||defined(HAVE_X11)||defined(HAVE_XV)
#define X11_FULLSCREEN
#endif
EOF
echo "Creating libvo/config.mak"
_voobj=`echo $_vosrc | sed -e 's/\.c/\.o/g'`
cat > libvo/config.mak << EOF
include ../config.mak
OPTIONAL_SRCS=$_vosrc
OPTIONAL_OBJS=$_voobj
EOF
echo "Creating libac3/config.mak"
if [ $_sse = yes ]; then
_downmixc='downmix/downmix_kni.S'
_downmixo='downmix/downmix_kni.o'
else
if [ $_binutils = yes ]; then
_downmixc='downmix/downmix_i386.S'
_downmixo='downmix/downmix_i386.o'
else
_downmixc='downmix/downmix.c'
_downmixo='downmix/downmix.o'
cat << EOF
!!! Warning! fallback to slow downmix.c due the old binutils.
!!! Upgrade for better audio decoding performance.
EOF
fi
fi
cat > libac3/config.mak << EOF
include ../config.mak
OPTIONAL_SRCS = $_downmixc
OPTIONAL_OBJS = $_downmixo
EOF
echo "Creating mp3lib/config.mak"
if [ $_3dnow = yes ]; then
_3dnowobjectsrcs='dct36_3dnow.s dct64_3dnow.s decode_3dnow.s'
_3dnowobjectobjs='dct36_3dnow.o dct64_3dnow.o decode_3dnow.o'
else
_3dnowobjectsrcs=
_3dnowobjectobjs=
fi
cat > mp3lib/config.mak << EOF
include ../config.mak
OPTIONAL_SRCS = $_3dnowobjectsrcs
OPTIONAL_OBJS = $_3dnowobjectobjs
EOF
cat << EOF
Config files successfully generated by ./configure !
Please check config.h and config.mak files, tune CPU
and optimization flags if you don't like these defaults.
You can compile the program with 'make dep;make' and
install with 'make install'. Good luck!
EOF
if [ $_mtrr = yes ]; then
echo "Please check mtrr settings at /proc/mtrr (see DOCS/MTRR)"
echo
fi
if [ $_sdl = no ]; then
if [ $_have_sdl = yes ]; then
echo "You have libSDL installed, but SDL support is disabled by default."
echo "If you want to compile MPlayer with SDL support, re-run ./configure"
echo "with --enable-sdl. But it's very buggy & experimental code, use it"
echo "only if you really need it! And it works(?) *ONLY* with SDL v1.1.7 !"
echo "(SDL driver is NOT supported, so do NOT report bugs relating to SDL!)"
echo
fi
fi
if [ $_win32libdirnotify = yes ]; then
echo "Missing WIN32 codecs dir at $_win32libdir !"
echo "Make it and copy DLL files to there! (You can get them from your windows"
echo "directory or download ftp://thot.banki.hu/esp-team/linux/MPlayer/w32codec.zip"
else
echo "Ok, Win32 codecs directory at $_win32libdir already exists."
fi