2011-10-06 18:46:01 +00:00
|
|
|
/*
|
2015-04-13 07:36:54 +00:00
|
|
|
* This file is part of mpv.
|
2011-10-06 18:46:01 +00:00
|
|
|
*
|
Relicense some non-MPlayer source files to LGPL 2.1 or later
This covers source files which were added in mplayer2 and mpv times
only, and where all code is covered by LGPL relicensing agreements.
There are probably more files to which this applies, but I'm being
conservative here.
A file named ao_sdl.c exists in MPlayer too, but the mpv one is a
complete rewrite, and was added some time after the original ao_sdl.c
was removed. The same applies to vo_sdl.c, for which the SDL2 API is
radically different in addition (MPlayer supports SDL 1.2 only).
common.c contains only code written by me. But common.h is a strange
case: although it originally was named mp_common.h and exists in MPlayer
too, by now it contains only definitions written by uau and me. The
exceptions are the CONTROL_ defines - thus not changing the license of
common.h yet.
codec_tags.c contained once large tables generated from MPlayer's
codecs.conf, but all of these tables were removed.
From demux_playlist.c I'm removing a code fragment from someone who was
not asked; this probably could be done later (see commit 15dccc37).
misc.c is a bit complicated to reason about (it was split off mplayer.c
and thus contains random functions out of this file), but actually all
functions have been added post-MPlayer. Except get_relative_time(),
which was written by uau, but looks similar to 3 different versions of
something similar in each of the Unix/win32/OSX timer source files. I'm
not sure what that means in regards to copyright, so I've just moved it
into another still-GPL source file for now.
screenshot.c once had some minor parts of MPlayer's vf_screenshot.c, but
they're all gone.
2016-01-19 17:36:06 +00:00
|
|
|
* mpv is free software; you can redistribute it and/or
|
|
|
|
* modify it under the terms of the GNU Lesser General Public
|
|
|
|
* License as published by the Free Software Foundation; either
|
|
|
|
* version 2.1 of the License, or (at your option) any later version.
|
2011-10-06 18:46:01 +00:00
|
|
|
*
|
2015-04-13 07:36:54 +00:00
|
|
|
* mpv is distributed in the hope that it will be useful,
|
2011-10-06 18:46:01 +00:00
|
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
Relicense some non-MPlayer source files to LGPL 2.1 or later
This covers source files which were added in mplayer2 and mpv times
only, and where all code is covered by LGPL relicensing agreements.
There are probably more files to which this applies, but I'm being
conservative here.
A file named ao_sdl.c exists in MPlayer too, but the mpv one is a
complete rewrite, and was added some time after the original ao_sdl.c
was removed. The same applies to vo_sdl.c, for which the SDL2 API is
radically different in addition (MPlayer supports SDL 1.2 only).
common.c contains only code written by me. But common.h is a strange
case: although it originally was named mp_common.h and exists in MPlayer
too, by now it contains only definitions written by uau and me. The
exceptions are the CONTROL_ defines - thus not changing the license of
common.h yet.
codec_tags.c contained once large tables generated from MPlayer's
codecs.conf, but all of these tables were removed.
From demux_playlist.c I'm removing a code fragment from someone who was
not asked; this probably could be done later (see commit 15dccc37).
misc.c is a bit complicated to reason about (it was split off mplayer.c
and thus contains random functions out of this file), but actually all
functions have been added post-MPlayer. Except get_relative_time(),
which was written by uau, but looks similar to 3 different versions of
something similar in each of the Unix/win32/OSX timer source files. I'm
not sure what that means in regards to copyright, so I've just moved it
into another still-GPL source file for now.
screenshot.c once had some minor parts of MPlayer's vf_screenshot.c, but
they're all gone.
2016-01-19 17:36:06 +00:00
|
|
|
* GNU Lesser General Public License for more details.
|
2011-10-06 18:46:01 +00:00
|
|
|
*
|
Relicense some non-MPlayer source files to LGPL 2.1 or later
This covers source files which were added in mplayer2 and mpv times
only, and where all code is covered by LGPL relicensing agreements.
There are probably more files to which this applies, but I'm being
conservative here.
A file named ao_sdl.c exists in MPlayer too, but the mpv one is a
complete rewrite, and was added some time after the original ao_sdl.c
was removed. The same applies to vo_sdl.c, for which the SDL2 API is
radically different in addition (MPlayer supports SDL 1.2 only).
common.c contains only code written by me. But common.h is a strange
case: although it originally was named mp_common.h and exists in MPlayer
too, by now it contains only definitions written by uau and me. The
exceptions are the CONTROL_ defines - thus not changing the license of
common.h yet.
codec_tags.c contained once large tables generated from MPlayer's
codecs.conf, but all of these tables were removed.
From demux_playlist.c I'm removing a code fragment from someone who was
not asked; this probably could be done later (see commit 15dccc37).
misc.c is a bit complicated to reason about (it was split off mplayer.c
and thus contains random functions out of this file), but actually all
functions have been added post-MPlayer. Except get_relative_time(),
which was written by uau, but looks similar to 3 different versions of
something similar in each of the Unix/win32/OSX timer source files. I'm
not sure what that means in regards to copyright, so I've just moved it
into another still-GPL source file for now.
screenshot.c once had some minor parts of MPlayer's vf_screenshot.c, but
they're all gone.
2016-01-19 17:36:06 +00:00
|
|
|
* You should have received a copy of the GNU Lesser General Public
|
|
|
|
* License along with mpv. If not, see <http://www.gnu.org/licenses/>.
|
2011-10-06 18:46:01 +00:00
|
|
|
*/
|
|
|
|
|
|
|
|
#include <stdlib.h>
|
|
|
|
#include <string.h>
|
screenshot: make screenshot filenames configurable
This adds the --screenshot-template option, which specifies a template
for the filename used for a screenshot. The '%' character is parsed as
format specifier. These format specifiers insert metadata into the
filename. For example, '%f' is replaced with the filename of the
currently played file.
The following format specifiers are available:
%n Insert sequence number (padded with 4 zeros), e.g. "0002".
%0Nn Like %n, but pad to N zeros (N = 0 to 9).
%n behaves like %04n.
%#n Like %n, but reset the sequence counter on every screenshot.
(Useful if other parts in the template make the resulting
filename already mostly unique.)
%#0Nn Use %0Nn and %#n at the same time.
%f Insert filename of the currently played video.
%F Like %f, but with stripped file extension ("." and rest).
%p Insert current playback time, in HH:MM:SS format.
%P Like %p, but adds milliseconds: HH:MM:SS.mmmm
%tX Insert the current local date/time, using the date format X.
X is a single letter and is passed to strftime() as "%X".
E.g. "%td" inserts the number of the current day.
%{prop} Insert the value of the slave property 'prop'.
E.g. %{filename} is the same as %f. If the property doesn't
exist or is not available, nothing is inserted, unless a
fallback is specified as in %{prop:fallback text}.
%% Insert the character '%'.
The strings inserted by format specifiers will be checked for
characters not allowed in filenames (including '/' and '\'), and
replaced with the placeholder '_'. (This doesn't happen for text that
was passed with the --screenshot-template option, and allows specifying
a screenshot target directory by prefixing the template with a relative
or absolute path.)
2012-02-29 02:46:25 +00:00
|
|
|
#include <time.h>
|
2011-10-06 18:46:01 +00:00
|
|
|
|
|
|
|
#include "config.h"
|
2011-10-06 18:46:02 +00:00
|
|
|
|
2012-04-29 05:32:57 +00:00
|
|
|
#include "osdep/io.h"
|
|
|
|
|
2016-01-11 18:03:40 +00:00
|
|
|
#include "mpv_talloc.h"
|
2013-10-29 20:35:29 +00:00
|
|
|
#include "screenshot.h"
|
2013-12-17 00:08:53 +00:00
|
|
|
#include "core.h"
|
2013-10-29 20:35:29 +00:00
|
|
|
#include "command.h"
|
2014-08-29 10:09:04 +00:00
|
|
|
#include "misc/bstr.h"
|
player: make screenshot commands honor the async flag
And also change input.conf to make all screenshots async. (Except the
every-frame mode, which always uses synchronous mode and ignores the
flag.) By default, the "screenshot" command is still asynchronous,
because scripts etc. might depend on this behavior.
This is only partially async. The code for determining the filename is
still always run synchronously. Only encoding the screenshot and writing
it to disk is asynchronous. We explicitly document the exact behavior as
undefined, so it can be changed any time.
Some of this is a bit messy, because I wanted to avoid duplicating the
message display code between sync and async mode. In async mode, this is
called from a worker thread, which is not safe because showing a message
accesses the thread-unsafe OSD code. So the core has to be locked during
this, which implies accessing the core and all that. So the code has
weird locking calls, and we need to do core destruction in a more
"controlled" manner (thus the outstanding_async field).
(What I'd really want would be the OSD simply showing log messages
instead.)
This is pretty untested, so expect bugs.
Fixes #4250.
2017-04-01 18:45:20 +00:00
|
|
|
#include "misc/dispatch.h"
|
|
|
|
#include "misc/thread_pool.h"
|
2013-12-17 01:39:45 +00:00
|
|
|
#include "common/msg.h"
|
2013-12-17 01:02:25 +00:00
|
|
|
#include "options/path.h"
|
2012-11-09 00:06:43 +00:00
|
|
|
#include "video/mp_image.h"
|
2017-01-12 12:02:19 +00:00
|
|
|
#include "video/mp_image_pool.h"
|
2012-11-09 00:06:43 +00:00
|
|
|
#include "video/decode/dec_video.h"
|
|
|
|
#include "video/out/vo.h"
|
|
|
|
#include "video/image_writer.h"
|
2013-11-24 11:58:06 +00:00
|
|
|
#include "sub/osd.h"
|
2011-10-06 18:46:01 +00:00
|
|
|
|
2012-11-09 00:06:43 +00:00
|
|
|
#include "video/csputils.h"
|
2011-10-06 18:46:01 +00:00
|
|
|
|
2012-10-20 21:32:45 +00:00
|
|
|
#define MODE_FULL_WINDOW 1
|
|
|
|
#define MODE_SUBTITLES 2
|
|
|
|
|
2011-10-06 18:46:01 +00:00
|
|
|
typedef struct screenshot_ctx {
|
2011-10-06 18:46:02 +00:00
|
|
|
struct MPContext *mpctx;
|
|
|
|
|
2012-10-20 21:32:45 +00:00
|
|
|
int mode;
|
2013-02-24 21:52:47 +00:00
|
|
|
bool each_frame;
|
|
|
|
bool osd;
|
2011-10-06 18:46:01 +00:00
|
|
|
|
|
|
|
int frameno;
|
player: make screenshot commands honor the async flag
And also change input.conf to make all screenshots async. (Except the
every-frame mode, which always uses synchronous mode and ignores the
flag.) By default, the "screenshot" command is still asynchronous,
because scripts etc. might depend on this behavior.
This is only partially async. The code for determining the filename is
still always run synchronously. Only encoding the screenshot and writing
it to disk is asynchronous. We explicitly document the exact behavior as
undefined, so it can be changed any time.
Some of this is a bit messy, because I wanted to avoid duplicating the
message display code between sync and async mode. In async mode, this is
called from a worker thread, which is not safe because showing a message
accesses the thread-unsafe OSD code. So the core has to be locked during
this, which implies accessing the core and all that. So the code has
weird locking calls, and we need to do core destruction in a more
"controlled" manner (thus the outstanding_async field).
(What I'd really want would be the OSD simply showing log messages
instead.)
This is pretty untested, so expect bugs.
Fixes #4250.
2017-04-01 18:45:20 +00:00
|
|
|
|
|
|
|
struct mp_thread_pool *thread_pool;
|
2011-10-06 18:46:01 +00:00
|
|
|
} screenshot_ctx;
|
|
|
|
|
screenshot: make screenshot filenames configurable
This adds the --screenshot-template option, which specifies a template
for the filename used for a screenshot. The '%' character is parsed as
format specifier. These format specifiers insert metadata into the
filename. For example, '%f' is replaced with the filename of the
currently played file.
The following format specifiers are available:
%n Insert sequence number (padded with 4 zeros), e.g. "0002".
%0Nn Like %n, but pad to N zeros (N = 0 to 9).
%n behaves like %04n.
%#n Like %n, but reset the sequence counter on every screenshot.
(Useful if other parts in the template make the resulting
filename already mostly unique.)
%#0Nn Use %0Nn and %#n at the same time.
%f Insert filename of the currently played video.
%F Like %f, but with stripped file extension ("." and rest).
%p Insert current playback time, in HH:MM:SS format.
%P Like %p, but adds milliseconds: HH:MM:SS.mmmm
%tX Insert the current local date/time, using the date format X.
X is a single letter and is passed to strftime() as "%X".
E.g. "%td" inserts the number of the current day.
%{prop} Insert the value of the slave property 'prop'.
E.g. %{filename} is the same as %f. If the property doesn't
exist or is not available, nothing is inserted, unless a
fallback is specified as in %{prop:fallback text}.
%% Insert the character '%'.
The strings inserted by format specifiers will be checked for
characters not allowed in filenames (including '/' and '\'), and
replaced with the placeholder '_'. (This doesn't happen for text that
was passed with the --screenshot-template option, and allows specifying
a screenshot target directory by prefixing the template with a relative
or absolute path.)
2012-02-29 02:46:25 +00:00
|
|
|
void screenshot_init(struct MPContext *mpctx)
|
2011-10-06 18:46:01 +00:00
|
|
|
{
|
screenshot: make screenshot filenames configurable
This adds the --screenshot-template option, which specifies a template
for the filename used for a screenshot. The '%' character is parsed as
format specifier. These format specifiers insert metadata into the
filename. For example, '%f' is replaced with the filename of the
currently played file.
The following format specifiers are available:
%n Insert sequence number (padded with 4 zeros), e.g. "0002".
%0Nn Like %n, but pad to N zeros (N = 0 to 9).
%n behaves like %04n.
%#n Like %n, but reset the sequence counter on every screenshot.
(Useful if other parts in the template make the resulting
filename already mostly unique.)
%#0Nn Use %0Nn and %#n at the same time.
%f Insert filename of the currently played video.
%F Like %f, but with stripped file extension ("." and rest).
%p Insert current playback time, in HH:MM:SS format.
%P Like %p, but adds milliseconds: HH:MM:SS.mmmm
%tX Insert the current local date/time, using the date format X.
X is a single letter and is passed to strftime() as "%X".
E.g. "%td" inserts the number of the current day.
%{prop} Insert the value of the slave property 'prop'.
E.g. %{filename} is the same as %f. If the property doesn't
exist or is not available, nothing is inserted, unless a
fallback is specified as in %{prop:fallback text}.
%% Insert the character '%'.
The strings inserted by format specifiers will be checked for
characters not allowed in filenames (including '/' and '\'), and
replaced with the placeholder '_'. (This doesn't happen for text that
was passed with the --screenshot-template option, and allows specifying
a screenshot target directory by prefixing the template with a relative
or absolute path.)
2012-02-29 02:46:25 +00:00
|
|
|
mpctx->screenshot_ctx = talloc(mpctx, screenshot_ctx);
|
|
|
|
*mpctx->screenshot_ctx = (screenshot_ctx) {
|
|
|
|
.mpctx = mpctx,
|
|
|
|
.frameno = 1,
|
|
|
|
};
|
2011-10-06 18:46:01 +00:00
|
|
|
}
|
|
|
|
|
2013-02-24 21:52:47 +00:00
|
|
|
static void screenshot_msg(screenshot_ctx *ctx, int status, const char *msg,
|
|
|
|
...) PRINTF_ATTRIBUTE(3,4);
|
|
|
|
|
|
|
|
static void screenshot_msg(screenshot_ctx *ctx, int status, const char *msg,
|
|
|
|
...)
|
|
|
|
{
|
|
|
|
va_list ap;
|
|
|
|
char *s;
|
|
|
|
|
|
|
|
va_start(ap, msg);
|
|
|
|
s = talloc_vasprintf(NULL, msg, ap);
|
|
|
|
va_end(ap);
|
|
|
|
|
2017-04-01 18:46:21 +00:00
|
|
|
MP_MSG(ctx->mpctx, status, "%s\n", s);
|
|
|
|
if (ctx->osd && status <= MSGL_INFO)
|
2014-01-17 21:34:47 +00:00
|
|
|
set_osd_msg(ctx->mpctx, 1, ctx->mpctx->opts->osd_duration, "%s", s);
|
2013-02-24 21:52:47 +00:00
|
|
|
|
|
|
|
talloc_free(s);
|
|
|
|
}
|
|
|
|
|
screenshot: make screenshot filenames configurable
This adds the --screenshot-template option, which specifies a template
for the filename used for a screenshot. The '%' character is parsed as
format specifier. These format specifiers insert metadata into the
filename. For example, '%f' is replaced with the filename of the
currently played file.
The following format specifiers are available:
%n Insert sequence number (padded with 4 zeros), e.g. "0002".
%0Nn Like %n, but pad to N zeros (N = 0 to 9).
%n behaves like %04n.
%#n Like %n, but reset the sequence counter on every screenshot.
(Useful if other parts in the template make the resulting
filename already mostly unique.)
%#0Nn Use %0Nn and %#n at the same time.
%f Insert filename of the currently played video.
%F Like %f, but with stripped file extension ("." and rest).
%p Insert current playback time, in HH:MM:SS format.
%P Like %p, but adds milliseconds: HH:MM:SS.mmmm
%tX Insert the current local date/time, using the date format X.
X is a single letter and is passed to strftime() as "%X".
E.g. "%td" inserts the number of the current day.
%{prop} Insert the value of the slave property 'prop'.
E.g. %{filename} is the same as %f. If the property doesn't
exist or is not available, nothing is inserted, unless a
fallback is specified as in %{prop:fallback text}.
%% Insert the character '%'.
The strings inserted by format specifiers will be checked for
characters not allowed in filenames (including '/' and '\'), and
replaced with the placeholder '_'. (This doesn't happen for text that
was passed with the --screenshot-template option, and allows specifying
a screenshot target directory by prefixing the template with a relative
or absolute path.)
2012-02-29 02:46:25 +00:00
|
|
|
static char *stripext(void *talloc_ctx, const char *s)
|
2011-10-06 18:46:01 +00:00
|
|
|
{
|
screenshot: make screenshot filenames configurable
This adds the --screenshot-template option, which specifies a template
for the filename used for a screenshot. The '%' character is parsed as
format specifier. These format specifiers insert metadata into the
filename. For example, '%f' is replaced with the filename of the
currently played file.
The following format specifiers are available:
%n Insert sequence number (padded with 4 zeros), e.g. "0002".
%0Nn Like %n, but pad to N zeros (N = 0 to 9).
%n behaves like %04n.
%#n Like %n, but reset the sequence counter on every screenshot.
(Useful if other parts in the template make the resulting
filename already mostly unique.)
%#0Nn Use %0Nn and %#n at the same time.
%f Insert filename of the currently played video.
%F Like %f, but with stripped file extension ("." and rest).
%p Insert current playback time, in HH:MM:SS format.
%P Like %p, but adds milliseconds: HH:MM:SS.mmmm
%tX Insert the current local date/time, using the date format X.
X is a single letter and is passed to strftime() as "%X".
E.g. "%td" inserts the number of the current day.
%{prop} Insert the value of the slave property 'prop'.
E.g. %{filename} is the same as %f. If the property doesn't
exist or is not available, nothing is inserted, unless a
fallback is specified as in %{prop:fallback text}.
%% Insert the character '%'.
The strings inserted by format specifiers will be checked for
characters not allowed in filenames (including '/' and '\'), and
replaced with the placeholder '_'. (This doesn't happen for text that
was passed with the --screenshot-template option, and allows specifying
a screenshot target directory by prefixing the template with a relative
or absolute path.)
2012-02-29 02:46:25 +00:00
|
|
|
const char *end = strrchr(s, '.');
|
|
|
|
if (!end)
|
|
|
|
end = s + strlen(s);
|
2012-10-28 19:05:50 +00:00
|
|
|
return talloc_asprintf(talloc_ctx, "%.*s", (int)(end - s), s);
|
screenshot: make screenshot filenames configurable
This adds the --screenshot-template option, which specifies a template
for the filename used for a screenshot. The '%' character is parsed as
format specifier. These format specifiers insert metadata into the
filename. For example, '%f' is replaced with the filename of the
currently played file.
The following format specifiers are available:
%n Insert sequence number (padded with 4 zeros), e.g. "0002".
%0Nn Like %n, but pad to N zeros (N = 0 to 9).
%n behaves like %04n.
%#n Like %n, but reset the sequence counter on every screenshot.
(Useful if other parts in the template make the resulting
filename already mostly unique.)
%#0Nn Use %0Nn and %#n at the same time.
%f Insert filename of the currently played video.
%F Like %f, but with stripped file extension ("." and rest).
%p Insert current playback time, in HH:MM:SS format.
%P Like %p, but adds milliseconds: HH:MM:SS.mmmm
%tX Insert the current local date/time, using the date format X.
X is a single letter and is passed to strftime() as "%X".
E.g. "%td" inserts the number of the current day.
%{prop} Insert the value of the slave property 'prop'.
E.g. %{filename} is the same as %f. If the property doesn't
exist or is not available, nothing is inserted, unless a
fallback is specified as in %{prop:fallback text}.
%% Insert the character '%'.
The strings inserted by format specifiers will be checked for
characters not allowed in filenames (including '/' and '\'), and
replaced with the placeholder '_'. (This doesn't happen for text that
was passed with the --screenshot-template option, and allows specifying
a screenshot target directory by prefixing the template with a relative
or absolute path.)
2012-02-29 02:46:25 +00:00
|
|
|
}
|
|
|
|
|
player: make screenshot commands honor the async flag
And also change input.conf to make all screenshots async. (Except the
every-frame mode, which always uses synchronous mode and ignores the
flag.) By default, the "screenshot" command is still asynchronous,
because scripts etc. might depend on this behavior.
This is only partially async. The code for determining the filename is
still always run synchronously. Only encoding the screenshot and writing
it to disk is asynchronous. We explicitly document the exact behavior as
undefined, so it can be changed any time.
Some of this is a bit messy, because I wanted to avoid duplicating the
message display code between sync and async mode. In async mode, this is
called from a worker thread, which is not safe because showing a message
accesses the thread-unsafe OSD code. So the core has to be locked during
this, which implies accessing the core and all that. So the code has
weird locking calls, and we need to do core destruction in a more
"controlled" manner (thus the outstanding_async field).
(What I'd really want would be the OSD simply showing log messages
instead.)
This is pretty untested, so expect bugs.
Fixes #4250.
2017-04-01 18:45:20 +00:00
|
|
|
struct screenshot_item {
|
|
|
|
bool on_thread;
|
|
|
|
struct MPContext *mpctx;
|
|
|
|
const char *filename;
|
|
|
|
struct mp_image *img;
|
|
|
|
struct image_writer_opts opts;
|
|
|
|
};
|
|
|
|
|
|
|
|
#define LOCK(item) if (item->on_thread) mp_dispatch_lock(item->mpctx->dispatch);
|
|
|
|
#define UNLOCK(item) if (item->on_thread) mp_dispatch_unlock(item->mpctx->dispatch);
|
|
|
|
|
|
|
|
static void write_screenshot_thread(void *arg)
|
|
|
|
{
|
|
|
|
struct screenshot_item *item = arg;
|
|
|
|
screenshot_ctx *ctx = item->mpctx->screenshot_ctx;
|
|
|
|
|
|
|
|
LOCK(item)
|
2017-04-01 18:46:21 +00:00
|
|
|
screenshot_msg(ctx, MSGL_INFO, "Screenshot: '%s'", item->filename);
|
player: make screenshot commands honor the async flag
And also change input.conf to make all screenshots async. (Except the
every-frame mode, which always uses synchronous mode and ignores the
flag.) By default, the "screenshot" command is still asynchronous,
because scripts etc. might depend on this behavior.
This is only partially async. The code for determining the filename is
still always run synchronously. Only encoding the screenshot and writing
it to disk is asynchronous. We explicitly document the exact behavior as
undefined, so it can be changed any time.
Some of this is a bit messy, because I wanted to avoid duplicating the
message display code between sync and async mode. In async mode, this is
called from a worker thread, which is not safe because showing a message
accesses the thread-unsafe OSD code. So the core has to be locked during
this, which implies accessing the core and all that. So the code has
weird locking calls, and we need to do core destruction in a more
"controlled" manner (thus the outstanding_async field).
(What I'd really want would be the OSD simply showing log messages
instead.)
This is pretty untested, so expect bugs.
Fixes #4250.
2017-04-01 18:45:20 +00:00
|
|
|
UNLOCK(item)
|
|
|
|
|
|
|
|
if (!item->img || !write_image(item->img, &item->opts, item->filename,
|
|
|
|
item->mpctx->log))
|
|
|
|
{
|
|
|
|
LOCK(item)
|
2017-04-01 18:46:21 +00:00
|
|
|
screenshot_msg(ctx, MSGL_ERR, "Error writing screenshot!");
|
player: make screenshot commands honor the async flag
And also change input.conf to make all screenshots async. (Except the
every-frame mode, which always uses synchronous mode and ignores the
flag.) By default, the "screenshot" command is still asynchronous,
because scripts etc. might depend on this behavior.
This is only partially async. The code for determining the filename is
still always run synchronously. Only encoding the screenshot and writing
it to disk is asynchronous. We explicitly document the exact behavior as
undefined, so it can be changed any time.
Some of this is a bit messy, because I wanted to avoid duplicating the
message display code between sync and async mode. In async mode, this is
called from a worker thread, which is not safe because showing a message
accesses the thread-unsafe OSD code. So the core has to be locked during
this, which implies accessing the core and all that. So the code has
weird locking calls, and we need to do core destruction in a more
"controlled" manner (thus the outstanding_async field).
(What I'd really want would be the OSD simply showing log messages
instead.)
This is pretty untested, so expect bugs.
Fixes #4250.
2017-04-01 18:45:20 +00:00
|
|
|
UNLOCK(item)
|
|
|
|
}
|
|
|
|
|
|
|
|
if (item->on_thread) {
|
|
|
|
mp_dispatch_lock(item->mpctx->dispatch);
|
2017-04-01 18:46:21 +00:00
|
|
|
screenshot_msg(ctx, MSGL_V, "Screenshot writing done.");
|
player: make screenshot commands honor the async flag
And also change input.conf to make all screenshots async. (Except the
every-frame mode, which always uses synchronous mode and ignores the
flag.) By default, the "screenshot" command is still asynchronous,
because scripts etc. might depend on this behavior.
This is only partially async. The code for determining the filename is
still always run synchronously. Only encoding the screenshot and writing
it to disk is asynchronous. We explicitly document the exact behavior as
undefined, so it can be changed any time.
Some of this is a bit messy, because I wanted to avoid duplicating the
message display code between sync and async mode. In async mode, this is
called from a worker thread, which is not safe because showing a message
accesses the thread-unsafe OSD code. So the core has to be locked during
this, which implies accessing the core and all that. So the code has
weird locking calls, and we need to do core destruction in a more
"controlled" manner (thus the outstanding_async field).
(What I'd really want would be the OSD simply showing log messages
instead.)
This is pretty untested, so expect bugs.
Fixes #4250.
2017-04-01 18:45:20 +00:00
|
|
|
item->mpctx->outstanding_async -= 1;
|
|
|
|
mp_wakeup_core(item->mpctx);
|
|
|
|
mp_dispatch_unlock(item->mpctx->dispatch);
|
|
|
|
}
|
|
|
|
|
|
|
|
talloc_free(item);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void write_screenshot(struct MPContext *mpctx, struct mp_image *img,
|
|
|
|
const char *filename, struct image_writer_opts *opts,
|
|
|
|
bool async)
|
|
|
|
{
|
|
|
|
screenshot_ctx *ctx = mpctx->screenshot_ctx;
|
|
|
|
struct image_writer_opts *gopts = mpctx->opts->screenshot_image_opts;
|
|
|
|
|
|
|
|
struct screenshot_item *item = talloc_zero(NULL, struct screenshot_item);
|
|
|
|
*item = (struct screenshot_item){
|
|
|
|
.mpctx = mpctx,
|
|
|
|
.filename = talloc_strdup(item, filename),
|
|
|
|
.img = talloc_steal(item, mp_image_new_ref(img)),
|
|
|
|
.opts = opts ? *opts : *gopts,
|
|
|
|
};
|
|
|
|
|
|
|
|
if (async) {
|
|
|
|
if (!ctx->thread_pool)
|
|
|
|
ctx->thread_pool = mp_thread_pool_create(ctx, 1);
|
|
|
|
if (ctx->thread_pool) {
|
|
|
|
item->on_thread = true;
|
|
|
|
mpctx->outstanding_async += 1;
|
|
|
|
mp_thread_pool_queue(ctx->thread_pool, write_screenshot_thread, item);
|
|
|
|
item = NULL;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
if (item)
|
|
|
|
write_screenshot_thread(item);
|
|
|
|
}
|
|
|
|
|
screenshot: make screenshot filenames configurable
This adds the --screenshot-template option, which specifies a template
for the filename used for a screenshot. The '%' character is parsed as
format specifier. These format specifiers insert metadata into the
filename. For example, '%f' is replaced with the filename of the
currently played file.
The following format specifiers are available:
%n Insert sequence number (padded with 4 zeros), e.g. "0002".
%0Nn Like %n, but pad to N zeros (N = 0 to 9).
%n behaves like %04n.
%#n Like %n, but reset the sequence counter on every screenshot.
(Useful if other parts in the template make the resulting
filename already mostly unique.)
%#0Nn Use %0Nn and %#n at the same time.
%f Insert filename of the currently played video.
%F Like %f, but with stripped file extension ("." and rest).
%p Insert current playback time, in HH:MM:SS format.
%P Like %p, but adds milliseconds: HH:MM:SS.mmmm
%tX Insert the current local date/time, using the date format X.
X is a single letter and is passed to strftime() as "%X".
E.g. "%td" inserts the number of the current day.
%{prop} Insert the value of the slave property 'prop'.
E.g. %{filename} is the same as %f. If the property doesn't
exist or is not available, nothing is inserted, unless a
fallback is specified as in %{prop:fallback text}.
%% Insert the character '%'.
The strings inserted by format specifiers will be checked for
characters not allowed in filenames (including '/' and '\'), and
replaced with the placeholder '_'. (This doesn't happen for text that
was passed with the --screenshot-template option, and allows specifying
a screenshot target directory by prefixing the template with a relative
or absolute path.)
2012-02-29 02:46:25 +00:00
|
|
|
#ifdef _WIN32
|
|
|
|
#define ILLEGAL_FILENAME_CHARS "?\"/\\<>*|:"
|
|
|
|
#else
|
|
|
|
#define ILLEGAL_FILENAME_CHARS "/"
|
|
|
|
#endif
|
|
|
|
|
|
|
|
// Replace all characters disallowed in filenames with '_' and return the newly
|
|
|
|
// allocated result string.
|
|
|
|
static char *sanitize_filename(void *talloc_ctx, const char *s)
|
|
|
|
{
|
|
|
|
char *res = talloc_strdup(talloc_ctx, s);
|
|
|
|
char *cur = res;
|
|
|
|
while (*cur) {
|
|
|
|
if (strchr(ILLEGAL_FILENAME_CHARS, *cur) || ((unsigned char)*cur) < 32)
|
|
|
|
*cur = '_';
|
|
|
|
cur++;
|
2011-10-06 18:46:01 +00:00
|
|
|
}
|
screenshot: make screenshot filenames configurable
This adds the --screenshot-template option, which specifies a template
for the filename used for a screenshot. The '%' character is parsed as
format specifier. These format specifiers insert metadata into the
filename. For example, '%f' is replaced with the filename of the
currently played file.
The following format specifiers are available:
%n Insert sequence number (padded with 4 zeros), e.g. "0002".
%0Nn Like %n, but pad to N zeros (N = 0 to 9).
%n behaves like %04n.
%#n Like %n, but reset the sequence counter on every screenshot.
(Useful if other parts in the template make the resulting
filename already mostly unique.)
%#0Nn Use %0Nn and %#n at the same time.
%f Insert filename of the currently played video.
%F Like %f, but with stripped file extension ("." and rest).
%p Insert current playback time, in HH:MM:SS format.
%P Like %p, but adds milliseconds: HH:MM:SS.mmmm
%tX Insert the current local date/time, using the date format X.
X is a single letter and is passed to strftime() as "%X".
E.g. "%td" inserts the number of the current day.
%{prop} Insert the value of the slave property 'prop'.
E.g. %{filename} is the same as %f. If the property doesn't
exist or is not available, nothing is inserted, unless a
fallback is specified as in %{prop:fallback text}.
%% Insert the character '%'.
The strings inserted by format specifiers will be checked for
characters not allowed in filenames (including '/' and '\'), and
replaced with the placeholder '_'. (This doesn't happen for text that
was passed with the --screenshot-template option, and allows specifying
a screenshot target directory by prefixing the template with a relative
or absolute path.)
2012-02-29 02:46:25 +00:00
|
|
|
return res;
|
|
|
|
}
|
2011-10-06 18:46:01 +00:00
|
|
|
|
screenshot: make screenshot filenames configurable
This adds the --screenshot-template option, which specifies a template
for the filename used for a screenshot. The '%' character is parsed as
format specifier. These format specifiers insert metadata into the
filename. For example, '%f' is replaced with the filename of the
currently played file.
The following format specifiers are available:
%n Insert sequence number (padded with 4 zeros), e.g. "0002".
%0Nn Like %n, but pad to N zeros (N = 0 to 9).
%n behaves like %04n.
%#n Like %n, but reset the sequence counter on every screenshot.
(Useful if other parts in the template make the resulting
filename already mostly unique.)
%#0Nn Use %0Nn and %#n at the same time.
%f Insert filename of the currently played video.
%F Like %f, but with stripped file extension ("." and rest).
%p Insert current playback time, in HH:MM:SS format.
%P Like %p, but adds milliseconds: HH:MM:SS.mmmm
%tX Insert the current local date/time, using the date format X.
X is a single letter and is passed to strftime() as "%X".
E.g. "%td" inserts the number of the current day.
%{prop} Insert the value of the slave property 'prop'.
E.g. %{filename} is the same as %f. If the property doesn't
exist or is not available, nothing is inserted, unless a
fallback is specified as in %{prop:fallback text}.
%% Insert the character '%'.
The strings inserted by format specifiers will be checked for
characters not allowed in filenames (including '/' and '\'), and
replaced with the placeholder '_'. (This doesn't happen for text that
was passed with the --screenshot-template option, and allows specifying
a screenshot target directory by prefixing the template with a relative
or absolute path.)
2012-02-29 02:46:25 +00:00
|
|
|
static void append_filename(char **s, const char *f)
|
|
|
|
{
|
|
|
|
char *append = sanitize_filename(NULL, f);
|
|
|
|
*s = talloc_strdup_append(*s, append);
|
|
|
|
talloc_free(append);
|
|
|
|
}
|
2011-10-06 18:46:01 +00:00
|
|
|
|
screenshot: make screenshot filenames configurable
This adds the --screenshot-template option, which specifies a template
for the filename used for a screenshot. The '%' character is parsed as
format specifier. These format specifiers insert metadata into the
filename. For example, '%f' is replaced with the filename of the
currently played file.
The following format specifiers are available:
%n Insert sequence number (padded with 4 zeros), e.g. "0002".
%0Nn Like %n, but pad to N zeros (N = 0 to 9).
%n behaves like %04n.
%#n Like %n, but reset the sequence counter on every screenshot.
(Useful if other parts in the template make the resulting
filename already mostly unique.)
%#0Nn Use %0Nn and %#n at the same time.
%f Insert filename of the currently played video.
%F Like %f, but with stripped file extension ("." and rest).
%p Insert current playback time, in HH:MM:SS format.
%P Like %p, but adds milliseconds: HH:MM:SS.mmmm
%tX Insert the current local date/time, using the date format X.
X is a single letter and is passed to strftime() as "%X".
E.g. "%td" inserts the number of the current day.
%{prop} Insert the value of the slave property 'prop'.
E.g. %{filename} is the same as %f. If the property doesn't
exist or is not available, nothing is inserted, unless a
fallback is specified as in %{prop:fallback text}.
%% Insert the character '%'.
The strings inserted by format specifiers will be checked for
characters not allowed in filenames (including '/' and '\'), and
replaced with the placeholder '_'. (This doesn't happen for text that
was passed with the --screenshot-template option, and allows specifying
a screenshot target directory by prefixing the template with a relative
or absolute path.)
2012-02-29 02:46:25 +00:00
|
|
|
static char *create_fname(struct MPContext *mpctx, char *template,
|
|
|
|
const char *file_ext, int *sequence, int *frameno)
|
|
|
|
{
|
|
|
|
char *res = talloc_strdup(NULL, ""); //empty string, non-NULL context
|
|
|
|
|
|
|
|
time_t raw_time = time(NULL);
|
|
|
|
struct tm *local_time = localtime(&raw_time);
|
|
|
|
|
|
|
|
if (!template || *template == '\0')
|
2015-01-26 10:38:23 +00:00
|
|
|
return NULL;
|
screenshot: make screenshot filenames configurable
This adds the --screenshot-template option, which specifies a template
for the filename used for a screenshot. The '%' character is parsed as
format specifier. These format specifiers insert metadata into the
filename. For example, '%f' is replaced with the filename of the
currently played file.
The following format specifiers are available:
%n Insert sequence number (padded with 4 zeros), e.g. "0002".
%0Nn Like %n, but pad to N zeros (N = 0 to 9).
%n behaves like %04n.
%#n Like %n, but reset the sequence counter on every screenshot.
(Useful if other parts in the template make the resulting
filename already mostly unique.)
%#0Nn Use %0Nn and %#n at the same time.
%f Insert filename of the currently played video.
%F Like %f, but with stripped file extension ("." and rest).
%p Insert current playback time, in HH:MM:SS format.
%P Like %p, but adds milliseconds: HH:MM:SS.mmmm
%tX Insert the current local date/time, using the date format X.
X is a single letter and is passed to strftime() as "%X".
E.g. "%td" inserts the number of the current day.
%{prop} Insert the value of the slave property 'prop'.
E.g. %{filename} is the same as %f. If the property doesn't
exist or is not available, nothing is inserted, unless a
fallback is specified as in %{prop:fallback text}.
%% Insert the character '%'.
The strings inserted by format specifiers will be checked for
characters not allowed in filenames (including '/' and '\'), and
replaced with the placeholder '_'. (This doesn't happen for text that
was passed with the --screenshot-template option, and allows specifying
a screenshot target directory by prefixing the template with a relative
or absolute path.)
2012-02-29 02:46:25 +00:00
|
|
|
|
|
|
|
for (;;) {
|
|
|
|
char *next = strchr(template, '%');
|
|
|
|
if (!next)
|
|
|
|
break;
|
|
|
|
res = talloc_strndup_append(res, template, next - template);
|
|
|
|
template = next + 1;
|
|
|
|
char fmt = *template++;
|
|
|
|
switch (fmt) {
|
|
|
|
case '#':
|
|
|
|
case '0':
|
|
|
|
case 'n': {
|
|
|
|
int digits = '4';
|
|
|
|
if (fmt == '#') {
|
|
|
|
if (!*sequence) {
|
|
|
|
*frameno = 1;
|
|
|
|
}
|
|
|
|
fmt = *template++;
|
|
|
|
}
|
|
|
|
if (fmt == '0') {
|
|
|
|
digits = *template++;
|
|
|
|
if (digits < '0' || digits > '9')
|
|
|
|
goto error_exit;
|
|
|
|
fmt = *template++;
|
|
|
|
}
|
|
|
|
if (fmt != 'n')
|
|
|
|
goto error_exit;
|
|
|
|
char fmtstr[] = {'%', '0', digits, 'd', '\0'};
|
|
|
|
res = talloc_asprintf_append(res, fmtstr, *frameno);
|
|
|
|
if (*frameno < 100000 - 1) {
|
|
|
|
(*frameno) += 1;
|
|
|
|
(*sequence) += 1;
|
|
|
|
}
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
case 'f':
|
|
|
|
case 'F': {
|
2015-09-02 02:41:16 +00:00
|
|
|
char *video_file = NULL;
|
|
|
|
if (mpctx->filename)
|
|
|
|
video_file = mp_basename(mpctx->filename);
|
|
|
|
|
|
|
|
if (!video_file)
|
|
|
|
video_file = "NO_FILE";
|
|
|
|
|
|
|
|
char *name = video_file;
|
|
|
|
if (fmt == 'F')
|
|
|
|
name = stripext(res, video_file);
|
|
|
|
append_filename(&res, name);
|
screenshot: make screenshot filenames configurable
This adds the --screenshot-template option, which specifies a template
for the filename used for a screenshot. The '%' character is parsed as
format specifier. These format specifiers insert metadata into the
filename. For example, '%f' is replaced with the filename of the
currently played file.
The following format specifiers are available:
%n Insert sequence number (padded with 4 zeros), e.g. "0002".
%0Nn Like %n, but pad to N zeros (N = 0 to 9).
%n behaves like %04n.
%#n Like %n, but reset the sequence counter on every screenshot.
(Useful if other parts in the template make the resulting
filename already mostly unique.)
%#0Nn Use %0Nn and %#n at the same time.
%f Insert filename of the currently played video.
%F Like %f, but with stripped file extension ("." and rest).
%p Insert current playback time, in HH:MM:SS format.
%P Like %p, but adds milliseconds: HH:MM:SS.mmmm
%tX Insert the current local date/time, using the date format X.
X is a single letter and is passed to strftime() as "%X".
E.g. "%td" inserts the number of the current day.
%{prop} Insert the value of the slave property 'prop'.
E.g. %{filename} is the same as %f. If the property doesn't
exist or is not available, nothing is inserted, unless a
fallback is specified as in %{prop:fallback text}.
%% Insert the character '%'.
The strings inserted by format specifiers will be checked for
characters not allowed in filenames (including '/' and '\'), and
replaced with the placeholder '_'. (This doesn't happen for text that
was passed with the --screenshot-template option, and allows specifying
a screenshot target directory by prefixing the template with a relative
or absolute path.)
2012-02-29 02:46:25 +00:00
|
|
|
break;
|
|
|
|
}
|
2014-01-08 20:07:10 +00:00
|
|
|
case 'x':
|
|
|
|
case 'X': {
|
|
|
|
char *fallback = "";
|
|
|
|
if (fmt == 'X') {
|
|
|
|
if (template[0] != '{')
|
|
|
|
goto error_exit;
|
|
|
|
char *end = strchr(template, '}');
|
|
|
|
if (!end)
|
|
|
|
goto error_exit;
|
|
|
|
fallback = talloc_strndup(res, template + 1, end - template - 1);
|
|
|
|
template = end + 1;
|
|
|
|
}
|
|
|
|
if (!mpctx->filename || mp_is_url(bstr0(mpctx->filename))) {
|
|
|
|
res = talloc_strdup_append(res, fallback);
|
|
|
|
} else {
|
|
|
|
bstr dir = mp_dirname(mpctx->filename);
|
|
|
|
if (!bstr_equals0(dir, "."))
|
|
|
|
res = talloc_asprintf_append(res, "%.*s", BSTR_P(dir));
|
|
|
|
}
|
|
|
|
break;
|
|
|
|
}
|
screenshot: make screenshot filenames configurable
This adds the --screenshot-template option, which specifies a template
for the filename used for a screenshot. The '%' character is parsed as
format specifier. These format specifiers insert metadata into the
filename. For example, '%f' is replaced with the filename of the
currently played file.
The following format specifiers are available:
%n Insert sequence number (padded with 4 zeros), e.g. "0002".
%0Nn Like %n, but pad to N zeros (N = 0 to 9).
%n behaves like %04n.
%#n Like %n, but reset the sequence counter on every screenshot.
(Useful if other parts in the template make the resulting
filename already mostly unique.)
%#0Nn Use %0Nn and %#n at the same time.
%f Insert filename of the currently played video.
%F Like %f, but with stripped file extension ("." and rest).
%p Insert current playback time, in HH:MM:SS format.
%P Like %p, but adds milliseconds: HH:MM:SS.mmmm
%tX Insert the current local date/time, using the date format X.
X is a single letter and is passed to strftime() as "%X".
E.g. "%td" inserts the number of the current day.
%{prop} Insert the value of the slave property 'prop'.
E.g. %{filename} is the same as %f. If the property doesn't
exist or is not available, nothing is inserted, unless a
fallback is specified as in %{prop:fallback text}.
%% Insert the character '%'.
The strings inserted by format specifiers will be checked for
characters not allowed in filenames (including '/' and '\'), and
replaced with the placeholder '_'. (This doesn't happen for text that
was passed with the --screenshot-template option, and allows specifying
a screenshot target directory by prefixing the template with a relative
or absolute path.)
2012-02-29 02:46:25 +00:00
|
|
|
case 'p':
|
2012-09-01 19:59:13 +00:00
|
|
|
case 'P': {
|
2014-06-29 17:27:46 +00:00
|
|
|
char *t = mp_format_time(get_playback_time(mpctx), fmt == 'P');
|
2012-09-01 19:59:13 +00:00
|
|
|
append_filename(&res, t);
|
|
|
|
talloc_free(t);
|
screenshot: make screenshot filenames configurable
This adds the --screenshot-template option, which specifies a template
for the filename used for a screenshot. The '%' character is parsed as
format specifier. These format specifiers insert metadata into the
filename. For example, '%f' is replaced with the filename of the
currently played file.
The following format specifiers are available:
%n Insert sequence number (padded with 4 zeros), e.g. "0002".
%0Nn Like %n, but pad to N zeros (N = 0 to 9).
%n behaves like %04n.
%#n Like %n, but reset the sequence counter on every screenshot.
(Useful if other parts in the template make the resulting
filename already mostly unique.)
%#0Nn Use %0Nn and %#n at the same time.
%f Insert filename of the currently played video.
%F Like %f, but with stripped file extension ("." and rest).
%p Insert current playback time, in HH:MM:SS format.
%P Like %p, but adds milliseconds: HH:MM:SS.mmmm
%tX Insert the current local date/time, using the date format X.
X is a single letter and is passed to strftime() as "%X".
E.g. "%td" inserts the number of the current day.
%{prop} Insert the value of the slave property 'prop'.
E.g. %{filename} is the same as %f. If the property doesn't
exist or is not available, nothing is inserted, unless a
fallback is specified as in %{prop:fallback text}.
%% Insert the character '%'.
The strings inserted by format specifiers will be checked for
characters not allowed in filenames (including '/' and '\'), and
replaced with the placeholder '_'. (This doesn't happen for text that
was passed with the --screenshot-template option, and allows specifying
a screenshot target directory by prefixing the template with a relative
or absolute path.)
2012-02-29 02:46:25 +00:00
|
|
|
break;
|
2012-09-01 19:59:13 +00:00
|
|
|
}
|
2013-03-25 19:32:29 +00:00
|
|
|
case 'w': {
|
2013-09-15 17:07:35 +00:00
|
|
|
char tfmt = *template;
|
|
|
|
if (!tfmt)
|
2013-03-25 19:32:29 +00:00
|
|
|
goto error_exit;
|
|
|
|
template++;
|
2013-09-15 17:07:35 +00:00
|
|
|
char fmtstr[] = {'%', tfmt, '\0'};
|
2014-06-29 17:27:46 +00:00
|
|
|
char *s = mp_format_time_fmt(fmtstr, get_playback_time(mpctx));
|
2013-03-25 19:32:29 +00:00
|
|
|
if (!s)
|
|
|
|
goto error_exit;
|
|
|
|
append_filename(&res, s);
|
|
|
|
talloc_free(s);
|
|
|
|
break;
|
|
|
|
}
|
screenshot: make screenshot filenames configurable
This adds the --screenshot-template option, which specifies a template
for the filename used for a screenshot. The '%' character is parsed as
format specifier. These format specifiers insert metadata into the
filename. For example, '%f' is replaced with the filename of the
currently played file.
The following format specifiers are available:
%n Insert sequence number (padded with 4 zeros), e.g. "0002".
%0Nn Like %n, but pad to N zeros (N = 0 to 9).
%n behaves like %04n.
%#n Like %n, but reset the sequence counter on every screenshot.
(Useful if other parts in the template make the resulting
filename already mostly unique.)
%#0Nn Use %0Nn and %#n at the same time.
%f Insert filename of the currently played video.
%F Like %f, but with stripped file extension ("." and rest).
%p Insert current playback time, in HH:MM:SS format.
%P Like %p, but adds milliseconds: HH:MM:SS.mmmm
%tX Insert the current local date/time, using the date format X.
X is a single letter and is passed to strftime() as "%X".
E.g. "%td" inserts the number of the current day.
%{prop} Insert the value of the slave property 'prop'.
E.g. %{filename} is the same as %f. If the property doesn't
exist or is not available, nothing is inserted, unless a
fallback is specified as in %{prop:fallback text}.
%% Insert the character '%'.
The strings inserted by format specifiers will be checked for
characters not allowed in filenames (including '/' and '\'), and
replaced with the placeholder '_'. (This doesn't happen for text that
was passed with the --screenshot-template option, and allows specifying
a screenshot target directory by prefixing the template with a relative
or absolute path.)
2012-02-29 02:46:25 +00:00
|
|
|
case 't': {
|
2013-07-22 22:45:23 +00:00
|
|
|
char tfmt = *template;
|
|
|
|
if (!tfmt)
|
screenshot: make screenshot filenames configurable
This adds the --screenshot-template option, which specifies a template
for the filename used for a screenshot. The '%' character is parsed as
format specifier. These format specifiers insert metadata into the
filename. For example, '%f' is replaced with the filename of the
currently played file.
The following format specifiers are available:
%n Insert sequence number (padded with 4 zeros), e.g. "0002".
%0Nn Like %n, but pad to N zeros (N = 0 to 9).
%n behaves like %04n.
%#n Like %n, but reset the sequence counter on every screenshot.
(Useful if other parts in the template make the resulting
filename already mostly unique.)
%#0Nn Use %0Nn and %#n at the same time.
%f Insert filename of the currently played video.
%F Like %f, but with stripped file extension ("." and rest).
%p Insert current playback time, in HH:MM:SS format.
%P Like %p, but adds milliseconds: HH:MM:SS.mmmm
%tX Insert the current local date/time, using the date format X.
X is a single letter and is passed to strftime() as "%X".
E.g. "%td" inserts the number of the current day.
%{prop} Insert the value of the slave property 'prop'.
E.g. %{filename} is the same as %f. If the property doesn't
exist or is not available, nothing is inserted, unless a
fallback is specified as in %{prop:fallback text}.
%% Insert the character '%'.
The strings inserted by format specifiers will be checked for
characters not allowed in filenames (including '/' and '\'), and
replaced with the placeholder '_'. (This doesn't happen for text that
was passed with the --screenshot-template option, and allows specifying
a screenshot target directory by prefixing the template with a relative
or absolute path.)
2012-02-29 02:46:25 +00:00
|
|
|
goto error_exit;
|
|
|
|
template++;
|
2013-07-22 22:45:23 +00:00
|
|
|
char fmtstr[] = {'%', tfmt, '\0'};
|
screenshot: make screenshot filenames configurable
This adds the --screenshot-template option, which specifies a template
for the filename used for a screenshot. The '%' character is parsed as
format specifier. These format specifiers insert metadata into the
filename. For example, '%f' is replaced with the filename of the
currently played file.
The following format specifiers are available:
%n Insert sequence number (padded with 4 zeros), e.g. "0002".
%0Nn Like %n, but pad to N zeros (N = 0 to 9).
%n behaves like %04n.
%#n Like %n, but reset the sequence counter on every screenshot.
(Useful if other parts in the template make the resulting
filename already mostly unique.)
%#0Nn Use %0Nn and %#n at the same time.
%f Insert filename of the currently played video.
%F Like %f, but with stripped file extension ("." and rest).
%p Insert current playback time, in HH:MM:SS format.
%P Like %p, but adds milliseconds: HH:MM:SS.mmmm
%tX Insert the current local date/time, using the date format X.
X is a single letter and is passed to strftime() as "%X".
E.g. "%td" inserts the number of the current day.
%{prop} Insert the value of the slave property 'prop'.
E.g. %{filename} is the same as %f. If the property doesn't
exist or is not available, nothing is inserted, unless a
fallback is specified as in %{prop:fallback text}.
%% Insert the character '%'.
The strings inserted by format specifiers will be checked for
characters not allowed in filenames (including '/' and '\'), and
replaced with the placeholder '_'. (This doesn't happen for text that
was passed with the --screenshot-template option, and allows specifying
a screenshot target directory by prefixing the template with a relative
or absolute path.)
2012-02-29 02:46:25 +00:00
|
|
|
char buffer[80];
|
|
|
|
if (strftime(buffer, sizeof(buffer), fmtstr, local_time) == 0)
|
|
|
|
buffer[0] = '\0';
|
|
|
|
append_filename(&res, buffer);
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
case '{': {
|
|
|
|
char *end = strchr(template, '}');
|
|
|
|
if (!end)
|
|
|
|
goto error_exit;
|
2012-07-28 21:47:42 +00:00
|
|
|
struct bstr prop = bstr_splice(bstr0(template), 0, end - template);
|
commands: change property expansion format string
This affects property format strings like they are used in the
"show_text" input command, for --playing-msg, and other places.
To quote the documentation comment on m_properties_expand_string():
${NAME} is expanded to the value of property NAME.
If NAME starts with '=', use the raw value of the property.
${NAME:STR} expands to the property, or STR if the property is not
available.
${?NAME:STR} expands to STR if the property is available.
${!NAME:STR} expands to STR if the property is not available.
STR is recursively expanded using the same rules.
"$$" can be used to escape "$", and "$}" to escape "}".
"$>" disables parsing of "$" for the rest of the string.
Most importantly, "?(property:str)" becomes "${?property:str}".
Make the simple fallback case easier, e.g. "${property:fallback}"
instead of "${property}?(!property:fallback)".
Add the ability to escape the format meta characters. "$" is used for
escaping, because escaping with "\" is taken by the commands parser in
the layer below. "$>" can be used to disable interpretation of format
strings (of course escapes by the commands parser can't be canceled).
By default, properties which are unavailable or don't exist are turned
into a string signaling the status (e.g. "(unavailable)"), instead of
an empty string. If an empty string is desired, this has to be done
explicitly: "${property:}" (the fallback part is an empty string). Raw
properties still return an empty string on error.
m_properties_expand_string() now returns a talloc'ed pointer, instead of
a malloc'ed one.
2012-09-23 21:00:54 +00:00
|
|
|
char *tmp = talloc_asprintf(NULL, "${%.*s}", BSTR_P(prop));
|
|
|
|
char *s = mp_property_expand_string(mpctx, tmp);
|
|
|
|
talloc_free(tmp);
|
screenshot: make screenshot filenames configurable
This adds the --screenshot-template option, which specifies a template
for the filename used for a screenshot. The '%' character is parsed as
format specifier. These format specifiers insert metadata into the
filename. For example, '%f' is replaced with the filename of the
currently played file.
The following format specifiers are available:
%n Insert sequence number (padded with 4 zeros), e.g. "0002".
%0Nn Like %n, but pad to N zeros (N = 0 to 9).
%n behaves like %04n.
%#n Like %n, but reset the sequence counter on every screenshot.
(Useful if other parts in the template make the resulting
filename already mostly unique.)
%#0Nn Use %0Nn and %#n at the same time.
%f Insert filename of the currently played video.
%F Like %f, but with stripped file extension ("." and rest).
%p Insert current playback time, in HH:MM:SS format.
%P Like %p, but adds milliseconds: HH:MM:SS.mmmm
%tX Insert the current local date/time, using the date format X.
X is a single letter and is passed to strftime() as "%X".
E.g. "%td" inserts the number of the current day.
%{prop} Insert the value of the slave property 'prop'.
E.g. %{filename} is the same as %f. If the property doesn't
exist or is not available, nothing is inserted, unless a
fallback is specified as in %{prop:fallback text}.
%% Insert the character '%'.
The strings inserted by format specifiers will be checked for
characters not allowed in filenames (including '/' and '\'), and
replaced with the placeholder '_'. (This doesn't happen for text that
was passed with the --screenshot-template option, and allows specifying
a screenshot target directory by prefixing the template with a relative
or absolute path.)
2012-02-29 02:46:25 +00:00
|
|
|
if (s)
|
|
|
|
append_filename(&res, s);
|
|
|
|
talloc_free(s);
|
commands: change property expansion format string
This affects property format strings like they are used in the
"show_text" input command, for --playing-msg, and other places.
To quote the documentation comment on m_properties_expand_string():
${NAME} is expanded to the value of property NAME.
If NAME starts with '=', use the raw value of the property.
${NAME:STR} expands to the property, or STR if the property is not
available.
${?NAME:STR} expands to STR if the property is available.
${!NAME:STR} expands to STR if the property is not available.
STR is recursively expanded using the same rules.
"$$" can be used to escape "$", and "$}" to escape "}".
"$>" disables parsing of "$" for the rest of the string.
Most importantly, "?(property:str)" becomes "${?property:str}".
Make the simple fallback case easier, e.g. "${property:fallback}"
instead of "${property}?(!property:fallback)".
Add the ability to escape the format meta characters. "$" is used for
escaping, because escaping with "\" is taken by the commands parser in
the layer below. "$>" can be used to disable interpretation of format
strings (of course escapes by the commands parser can't be canceled).
By default, properties which are unavailable or don't exist are turned
into a string signaling the status (e.g. "(unavailable)"), instead of
an empty string. If an empty string is desired, this has to be done
explicitly: "${property:}" (the fallback part is an empty string). Raw
properties still return an empty string on error.
m_properties_expand_string() now returns a talloc'ed pointer, instead of
a malloc'ed one.
2012-09-23 21:00:54 +00:00
|
|
|
template = end + 1;
|
screenshot: make screenshot filenames configurable
This adds the --screenshot-template option, which specifies a template
for the filename used for a screenshot. The '%' character is parsed as
format specifier. These format specifiers insert metadata into the
filename. For example, '%f' is replaced with the filename of the
currently played file.
The following format specifiers are available:
%n Insert sequence number (padded with 4 zeros), e.g. "0002".
%0Nn Like %n, but pad to N zeros (N = 0 to 9).
%n behaves like %04n.
%#n Like %n, but reset the sequence counter on every screenshot.
(Useful if other parts in the template make the resulting
filename already mostly unique.)
%#0Nn Use %0Nn and %#n at the same time.
%f Insert filename of the currently played video.
%F Like %f, but with stripped file extension ("." and rest).
%p Insert current playback time, in HH:MM:SS format.
%P Like %p, but adds milliseconds: HH:MM:SS.mmmm
%tX Insert the current local date/time, using the date format X.
X is a single letter and is passed to strftime() as "%X".
E.g. "%td" inserts the number of the current day.
%{prop} Insert the value of the slave property 'prop'.
E.g. %{filename} is the same as %f. If the property doesn't
exist or is not available, nothing is inserted, unless a
fallback is specified as in %{prop:fallback text}.
%% Insert the character '%'.
The strings inserted by format specifiers will be checked for
characters not allowed in filenames (including '/' and '\'), and
replaced with the placeholder '_'. (This doesn't happen for text that
was passed with the --screenshot-template option, and allows specifying
a screenshot target directory by prefixing the template with a relative
or absolute path.)
2012-02-29 02:46:25 +00:00
|
|
|
break;
|
|
|
|
}
|
|
|
|
case '%':
|
|
|
|
res = talloc_strdup_append(res, "%");
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
goto error_exit;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
res = talloc_strdup_append(res, template);
|
2013-12-14 18:50:00 +00:00
|
|
|
res = talloc_asprintf_append(res, ".%s", file_ext);
|
2013-12-21 19:45:19 +00:00
|
|
|
char *fname = mp_get_user_path(NULL, mpctx->global, res);
|
2013-12-14 18:50:00 +00:00
|
|
|
talloc_free(res);
|
|
|
|
return fname;
|
screenshot: make screenshot filenames configurable
This adds the --screenshot-template option, which specifies a template
for the filename used for a screenshot. The '%' character is parsed as
format specifier. These format specifiers insert metadata into the
filename. For example, '%f' is replaced with the filename of the
currently played file.
The following format specifiers are available:
%n Insert sequence number (padded with 4 zeros), e.g. "0002".
%0Nn Like %n, but pad to N zeros (N = 0 to 9).
%n behaves like %04n.
%#n Like %n, but reset the sequence counter on every screenshot.
(Useful if other parts in the template make the resulting
filename already mostly unique.)
%#0Nn Use %0Nn and %#n at the same time.
%f Insert filename of the currently played video.
%F Like %f, but with stripped file extension ("." and rest).
%p Insert current playback time, in HH:MM:SS format.
%P Like %p, but adds milliseconds: HH:MM:SS.mmmm
%tX Insert the current local date/time, using the date format X.
X is a single letter and is passed to strftime() as "%X".
E.g. "%td" inserts the number of the current day.
%{prop} Insert the value of the slave property 'prop'.
E.g. %{filename} is the same as %f. If the property doesn't
exist or is not available, nothing is inserted, unless a
fallback is specified as in %{prop:fallback text}.
%% Insert the character '%'.
The strings inserted by format specifiers will be checked for
characters not allowed in filenames (including '/' and '\'), and
replaced with the placeholder '_'. (This doesn't happen for text that
was passed with the --screenshot-template option, and allows specifying
a screenshot target directory by prefixing the template with a relative
or absolute path.)
2012-02-29 02:46:25 +00:00
|
|
|
|
|
|
|
error_exit:
|
|
|
|
talloc_free(res);
|
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
|
2012-08-06 15:46:42 +00:00
|
|
|
static char *gen_fname(screenshot_ctx *ctx, const char *file_ext)
|
screenshot: make screenshot filenames configurable
This adds the --screenshot-template option, which specifies a template
for the filename used for a screenshot. The '%' character is parsed as
format specifier. These format specifiers insert metadata into the
filename. For example, '%f' is replaced with the filename of the
currently played file.
The following format specifiers are available:
%n Insert sequence number (padded with 4 zeros), e.g. "0002".
%0Nn Like %n, but pad to N zeros (N = 0 to 9).
%n behaves like %04n.
%#n Like %n, but reset the sequence counter on every screenshot.
(Useful if other parts in the template make the resulting
filename already mostly unique.)
%#0Nn Use %0Nn and %#n at the same time.
%f Insert filename of the currently played video.
%F Like %f, but with stripped file extension ("." and rest).
%p Insert current playback time, in HH:MM:SS format.
%P Like %p, but adds milliseconds: HH:MM:SS.mmmm
%tX Insert the current local date/time, using the date format X.
X is a single letter and is passed to strftime() as "%X".
E.g. "%td" inserts the number of the current day.
%{prop} Insert the value of the slave property 'prop'.
E.g. %{filename} is the same as %f. If the property doesn't
exist or is not available, nothing is inserted, unless a
fallback is specified as in %{prop:fallback text}.
%% Insert the character '%'.
The strings inserted by format specifiers will be checked for
characters not allowed in filenames (including '/' and '\'), and
replaced with the placeholder '_'. (This doesn't happen for text that
was passed with the --screenshot-template option, and allows specifying
a screenshot target directory by prefixing the template with a relative
or absolute path.)
2012-02-29 02:46:25 +00:00
|
|
|
{
|
|
|
|
int sequence = 0;
|
|
|
|
for (;;) {
|
|
|
|
int prev_sequence = sequence;
|
|
|
|
char *fname = create_fname(ctx->mpctx,
|
2013-07-27 19:24:54 +00:00
|
|
|
ctx->mpctx->opts->screenshot_template,
|
2012-08-06 15:46:42 +00:00
|
|
|
file_ext,
|
screenshot: make screenshot filenames configurable
This adds the --screenshot-template option, which specifies a template
for the filename used for a screenshot. The '%' character is parsed as
format specifier. These format specifiers insert metadata into the
filename. For example, '%f' is replaced with the filename of the
currently played file.
The following format specifiers are available:
%n Insert sequence number (padded with 4 zeros), e.g. "0002".
%0Nn Like %n, but pad to N zeros (N = 0 to 9).
%n behaves like %04n.
%#n Like %n, but reset the sequence counter on every screenshot.
(Useful if other parts in the template make the resulting
filename already mostly unique.)
%#0Nn Use %0Nn and %#n at the same time.
%f Insert filename of the currently played video.
%F Like %f, but with stripped file extension ("." and rest).
%p Insert current playback time, in HH:MM:SS format.
%P Like %p, but adds milliseconds: HH:MM:SS.mmmm
%tX Insert the current local date/time, using the date format X.
X is a single letter and is passed to strftime() as "%X".
E.g. "%td" inserts the number of the current day.
%{prop} Insert the value of the slave property 'prop'.
E.g. %{filename} is the same as %f. If the property doesn't
exist or is not available, nothing is inserted, unless a
fallback is specified as in %{prop:fallback text}.
%% Insert the character '%'.
The strings inserted by format specifiers will be checked for
characters not allowed in filenames (including '/' and '\'), and
replaced with the placeholder '_'. (This doesn't happen for text that
was passed with the --screenshot-template option, and allows specifying
a screenshot target directory by prefixing the template with a relative
or absolute path.)
2012-02-29 02:46:25 +00:00
|
|
|
&sequence,
|
|
|
|
&ctx->frameno);
|
|
|
|
|
|
|
|
if (!fname) {
|
2017-04-01 18:46:21 +00:00
|
|
|
screenshot_msg(ctx, MSGL_ERR, "Invalid screenshot filename "
|
2013-02-24 21:52:47 +00:00
|
|
|
"template! Fix or remove the --screenshot-template "
|
|
|
|
"option.");
|
screenshot: make screenshot filenames configurable
This adds the --screenshot-template option, which specifies a template
for the filename used for a screenshot. The '%' character is parsed as
format specifier. These format specifiers insert metadata into the
filename. For example, '%f' is replaced with the filename of the
currently played file.
The following format specifiers are available:
%n Insert sequence number (padded with 4 zeros), e.g. "0002".
%0Nn Like %n, but pad to N zeros (N = 0 to 9).
%n behaves like %04n.
%#n Like %n, but reset the sequence counter on every screenshot.
(Useful if other parts in the template make the resulting
filename already mostly unique.)
%#0Nn Use %0Nn and %#n at the same time.
%f Insert filename of the currently played video.
%F Like %f, but with stripped file extension ("." and rest).
%p Insert current playback time, in HH:MM:SS format.
%P Like %p, but adds milliseconds: HH:MM:SS.mmmm
%tX Insert the current local date/time, using the date format X.
X is a single letter and is passed to strftime() as "%X".
E.g. "%td" inserts the number of the current day.
%{prop} Insert the value of the slave property 'prop'.
E.g. %{filename} is the same as %f. If the property doesn't
exist or is not available, nothing is inserted, unless a
fallback is specified as in %{prop:fallback text}.
%% Insert the character '%'.
The strings inserted by format specifiers will be checked for
characters not allowed in filenames (including '/' and '\'), and
replaced with the placeholder '_'. (This doesn't happen for text that
was passed with the --screenshot-template option, and allows specifying
a screenshot target directory by prefixing the template with a relative
or absolute path.)
2012-02-29 02:46:25 +00:00
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
|
2015-05-03 12:44:42 +00:00
|
|
|
char *dir = ctx->mpctx->opts->screenshot_directory;
|
2015-05-01 17:55:43 +00:00
|
|
|
if (dir && dir[0]) {
|
|
|
|
void *t = fname;
|
|
|
|
dir = mp_get_user_path(t, ctx->mpctx->global, dir);
|
2015-05-09 13:26:47 +00:00
|
|
|
fname = mp_path_join(NULL, dir, fname);
|
2015-05-02 14:38:38 +00:00
|
|
|
|
|
|
|
mp_mkdirp(dir);
|
2016-04-14 20:39:10 +00:00
|
|
|
|
|
|
|
talloc_free(t);
|
2015-05-01 17:55:43 +00:00
|
|
|
}
|
|
|
|
|
2012-08-06 15:46:42 +00:00
|
|
|
if (!mp_path_exists(fname))
|
screenshot: make screenshot filenames configurable
This adds the --screenshot-template option, which specifies a template
for the filename used for a screenshot. The '%' character is parsed as
format specifier. These format specifiers insert metadata into the
filename. For example, '%f' is replaced with the filename of the
currently played file.
The following format specifiers are available:
%n Insert sequence number (padded with 4 zeros), e.g. "0002".
%0Nn Like %n, but pad to N zeros (N = 0 to 9).
%n behaves like %04n.
%#n Like %n, but reset the sequence counter on every screenshot.
(Useful if other parts in the template make the resulting
filename already mostly unique.)
%#0Nn Use %0Nn and %#n at the same time.
%f Insert filename of the currently played video.
%F Like %f, but with stripped file extension ("." and rest).
%p Insert current playback time, in HH:MM:SS format.
%P Like %p, but adds milliseconds: HH:MM:SS.mmmm
%tX Insert the current local date/time, using the date format X.
X is a single letter and is passed to strftime() as "%X".
E.g. "%td" inserts the number of the current day.
%{prop} Insert the value of the slave property 'prop'.
E.g. %{filename} is the same as %f. If the property doesn't
exist or is not available, nothing is inserted, unless a
fallback is specified as in %{prop:fallback text}.
%% Insert the character '%'.
The strings inserted by format specifiers will be checked for
characters not allowed in filenames (including '/' and '\'), and
replaced with the placeholder '_'. (This doesn't happen for text that
was passed with the --screenshot-template option, and allows specifying
a screenshot target directory by prefixing the template with a relative
or absolute path.)
2012-02-29 02:46:25 +00:00
|
|
|
return fname;
|
|
|
|
|
|
|
|
if (sequence == prev_sequence) {
|
2017-04-01 18:46:21 +00:00
|
|
|
screenshot_msg(ctx, MSGL_ERR, "Can't save screenshot, file '%s' "
|
2013-02-24 21:52:47 +00:00
|
|
|
"already exists!", fname);
|
2012-04-30 15:36:43 +00:00
|
|
|
talloc_free(fname);
|
screenshot: make screenshot filenames configurable
This adds the --screenshot-template option, which specifies a template
for the filename used for a screenshot. The '%' character is parsed as
format specifier. These format specifiers insert metadata into the
filename. For example, '%f' is replaced with the filename of the
currently played file.
The following format specifiers are available:
%n Insert sequence number (padded with 4 zeros), e.g. "0002".
%0Nn Like %n, but pad to N zeros (N = 0 to 9).
%n behaves like %04n.
%#n Like %n, but reset the sequence counter on every screenshot.
(Useful if other parts in the template make the resulting
filename already mostly unique.)
%#0Nn Use %0Nn and %#n at the same time.
%f Insert filename of the currently played video.
%F Like %f, but with stripped file extension ("." and rest).
%p Insert current playback time, in HH:MM:SS format.
%P Like %p, but adds milliseconds: HH:MM:SS.mmmm
%tX Insert the current local date/time, using the date format X.
X is a single letter and is passed to strftime() as "%X".
E.g. "%td" inserts the number of the current day.
%{prop} Insert the value of the slave property 'prop'.
E.g. %{filename} is the same as %f. If the property doesn't
exist or is not available, nothing is inserted, unless a
fallback is specified as in %{prop:fallback text}.
%% Insert the character '%'.
The strings inserted by format specifiers will be checked for
characters not allowed in filenames (including '/' and '\'), and
replaced with the placeholder '_'. (This doesn't happen for text that
was passed with the --screenshot-template option, and allows specifying
a screenshot target directory by prefixing the template with a relative
or absolute path.)
2012-02-29 02:46:25 +00:00
|
|
|
return NULL;
|
|
|
|
}
|
2012-04-29 17:54:01 +00:00
|
|
|
|
|
|
|
talloc_free(fname);
|
screenshot: make screenshot filenames configurable
This adds the --screenshot-template option, which specifies a template
for the filename used for a screenshot. The '%' character is parsed as
format specifier. These format specifiers insert metadata into the
filename. For example, '%f' is replaced with the filename of the
currently played file.
The following format specifiers are available:
%n Insert sequence number (padded with 4 zeros), e.g. "0002".
%0Nn Like %n, but pad to N zeros (N = 0 to 9).
%n behaves like %04n.
%#n Like %n, but reset the sequence counter on every screenshot.
(Useful if other parts in the template make the resulting
filename already mostly unique.)
%#0Nn Use %0Nn and %#n at the same time.
%f Insert filename of the currently played video.
%F Like %f, but with stripped file extension ("." and rest).
%p Insert current playback time, in HH:MM:SS format.
%P Like %p, but adds milliseconds: HH:MM:SS.mmmm
%tX Insert the current local date/time, using the date format X.
X is a single letter and is passed to strftime() as "%X".
E.g. "%td" inserts the number of the current day.
%{prop} Insert the value of the slave property 'prop'.
E.g. %{filename} is the same as %f. If the property doesn't
exist or is not available, nothing is inserted, unless a
fallback is specified as in %{prop:fallback text}.
%% Insert the character '%'.
The strings inserted by format specifiers will be checked for
characters not allowed in filenames (including '/' and '\'), and
replaced with the placeholder '_'. (This doesn't happen for text that
was passed with the --screenshot-template option, and allows specifying
a screenshot target directory by prefixing the template with a relative
or absolute path.)
2012-02-29 02:46:25 +00:00
|
|
|
}
|
2011-10-06 18:46:01 +00:00
|
|
|
}
|
|
|
|
|
2012-11-04 17:39:32 +00:00
|
|
|
static void add_subs(struct MPContext *mpctx, struct mp_image *image)
|
2011-10-06 18:46:01 +00:00
|
|
|
{
|
2015-12-19 19:04:31 +00:00
|
|
|
struct mp_osd_res res = osd_res_from_image_params(&image->params);
|
2014-06-15 18:46:57 +00:00
|
|
|
osd_draw_on_image(mpctx->osd, res, mpctx->video_pts,
|
2012-10-26 18:19:06 +00:00
|
|
|
OSD_DRAW_SUB_ONLY, image);
|
2012-10-20 21:32:45 +00:00
|
|
|
}
|
|
|
|
|
2013-07-08 18:34:26 +00:00
|
|
|
static struct mp_image *screenshot_get(struct MPContext *mpctx, int mode)
|
2011-10-06 18:46:01 +00:00
|
|
|
{
|
2013-07-08 18:34:26 +00:00
|
|
|
struct mp_image *image = NULL;
|
2015-01-23 21:06:12 +00:00
|
|
|
if (mode == MODE_SUBTITLES && osd_get_render_subs_in_filter(mpctx->osd))
|
|
|
|
mode = 0;
|
2012-10-20 21:32:45 +00:00
|
|
|
|
2015-04-16 20:16:04 +00:00
|
|
|
if (mpctx->video_out && mpctx->video_out->config_ok) {
|
2015-01-23 21:06:12 +00:00
|
|
|
vo_wait_frame(mpctx->video_out); // important for each-frame mode
|
2012-11-04 17:39:32 +00:00
|
|
|
|
2015-01-23 21:06:12 +00:00
|
|
|
if (mode != MODE_FULL_WINDOW)
|
2015-01-24 21:56:02 +00:00
|
|
|
image = vo_get_current_frame(mpctx->video_out);
|
2015-01-23 21:06:12 +00:00
|
|
|
if (!image) {
|
|
|
|
vo_control(mpctx->video_out, VOCTRL_SCREENSHOT_WIN, &image);
|
|
|
|
mode = MODE_FULL_WINDOW;
|
video: move display and timing to a separate thread
The VO is run inside its own thread. It also does most of video timing.
The playloop hands the image data and a realtime timestamp to the VO,
and the VO does the rest.
In particular, this allows the playloop to do other things, instead of
blocking for video redraw. But if anything accesses the VO during video
timing, it will block.
This also fixes vo_sdl.c event handling; but that is only a side-effect,
since reimplementing the broken way would require more effort.
Also drop --softsleep. In theory, this option helps if the kernel's
sleeping mechanism is too inaccurate for video timing. In practice, I
haven't ever encountered a situation where it helps, and it just burns
CPU cycles. On the other hand it's probably actively harmful, because
it prevents the libavcodec decoder threads from doing real work.
Side note:
Originally, I intended that multiple frames can be queued to the VO. But
this is not done, due to problems with OSD and other certain features.
OSD in particular is simply designed in a way that it can be neither
timed nor copied, so you do have to render it into the video frame
before you can draw the next frame. (Subtitles have no such restriction.
sd_lavc was even updated to fix this.) It seems the right solution to
queuing multiple VO frames is rendering on VO-backed framebuffers, like
vo_vdpau.c does. This requires VO driver support, and is out of scope
of this commit.
As consequence, the VO has a queue size of 1. The existing video queue
is just needed to compute frame duration, and will be moved out in the
next commit.
2014-08-12 21:02:08 +00:00
|
|
|
}
|
2015-01-23 21:06:12 +00:00
|
|
|
}
|
2012-11-04 17:39:32 +00:00
|
|
|
|
2017-03-18 11:53:28 +00:00
|
|
|
if (image && (image->fmt.flags & MP_IMGFLAG_HWACCEL)) {
|
2017-01-12 12:02:19 +00:00
|
|
|
struct mp_image *nimage = mp_image_hw_download(image, NULL);
|
|
|
|
if (!nimage && mpctx->vo_chain && mpctx->vo_chain->hwdec_devs) {
|
|
|
|
struct mp_hwdec_ctx *ctx =
|
|
|
|
hwdec_devices_get_first(mpctx->vo_chain->hwdec_devs);
|
2017-03-18 11:53:28 +00:00
|
|
|
if (ctx && ctx->download_image)
|
2017-01-12 12:02:19 +00:00
|
|
|
nimage = ctx->download_image(ctx, image, NULL);
|
|
|
|
}
|
2017-03-18 11:53:28 +00:00
|
|
|
talloc_free(image);
|
|
|
|
image = nimage;
|
2011-10-06 18:46:01 +00:00
|
|
|
}
|
2015-01-23 21:06:12 +00:00
|
|
|
|
|
|
|
if (image && mode == MODE_SUBTITLES)
|
|
|
|
add_subs(mpctx, image);
|
|
|
|
|
2013-07-08 18:34:26 +00:00
|
|
|
return image;
|
|
|
|
}
|
|
|
|
|
2015-04-20 21:11:03 +00:00
|
|
|
struct mp_image *screenshot_get_rgb(struct MPContext *mpctx, int mode)
|
|
|
|
{
|
|
|
|
struct mp_image *mpi = screenshot_get(mpctx, mode);
|
|
|
|
if (!mpi)
|
|
|
|
return NULL;
|
|
|
|
struct mp_image *res = convert_image(mpi, IMGFMT_BGR0, mpctx->log);
|
|
|
|
talloc_free(mpi);
|
|
|
|
return res;
|
|
|
|
}
|
|
|
|
|
2013-07-08 18:34:26 +00:00
|
|
|
void screenshot_to_file(struct MPContext *mpctx, const char *filename, int mode,
|
player: make screenshot commands honor the async flag
And also change input.conf to make all screenshots async. (Except the
every-frame mode, which always uses synchronous mode and ignores the
flag.) By default, the "screenshot" command is still asynchronous,
because scripts etc. might depend on this behavior.
This is only partially async. The code for determining the filename is
still always run synchronously. Only encoding the screenshot and writing
it to disk is asynchronous. We explicitly document the exact behavior as
undefined, so it can be changed any time.
Some of this is a bit messy, because I wanted to avoid duplicating the
message display code between sync and async mode. In async mode, this is
called from a worker thread, which is not safe because showing a message
accesses the thread-unsafe OSD code. So the core has to be locked during
this, which implies accessing the core and all that. So the code has
weird locking calls, and we need to do core destruction in a more
"controlled" manner (thus the outstanding_async field).
(What I'd really want would be the OSD simply showing log messages
instead.)
This is pretty untested, so expect bugs.
Fixes #4250.
2017-04-01 18:45:20 +00:00
|
|
|
bool osd, bool async)
|
2013-07-08 18:34:26 +00:00
|
|
|
{
|
|
|
|
screenshot_ctx *ctx = mpctx->screenshot_ctx;
|
2013-07-27 19:24:54 +00:00
|
|
|
struct image_writer_opts opts = *mpctx->opts->screenshot_image_opts;
|
2013-07-08 18:34:26 +00:00
|
|
|
bool old_osd = ctx->osd;
|
|
|
|
ctx->osd = osd;
|
|
|
|
|
|
|
|
char *ext = mp_splitext(filename, NULL);
|
2017-03-18 14:03:05 +00:00
|
|
|
int format = image_writer_format_from_ext(ext);
|
|
|
|
if (format)
|
|
|
|
opts.format = format;
|
2013-07-08 18:34:26 +00:00
|
|
|
struct mp_image *image = screenshot_get(mpctx, mode);
|
|
|
|
if (!image) {
|
2017-04-01 18:46:21 +00:00
|
|
|
screenshot_msg(ctx, MSGL_ERR, "Taking screenshot failed.");
|
2013-07-08 18:34:26 +00:00
|
|
|
goto end;
|
|
|
|
}
|
player: make screenshot commands honor the async flag
And also change input.conf to make all screenshots async. (Except the
every-frame mode, which always uses synchronous mode and ignores the
flag.) By default, the "screenshot" command is still asynchronous,
because scripts etc. might depend on this behavior.
This is only partially async. The code for determining the filename is
still always run synchronously. Only encoding the screenshot and writing
it to disk is asynchronous. We explicitly document the exact behavior as
undefined, so it can be changed any time.
Some of this is a bit messy, because I wanted to avoid duplicating the
message display code between sync and async mode. In async mode, this is
called from a worker thread, which is not safe because showing a message
accesses the thread-unsafe OSD code. So the core has to be locked during
this, which implies accessing the core and all that. So the code has
weird locking calls, and we need to do core destruction in a more
"controlled" manner (thus the outstanding_async field).
(What I'd really want would be the OSD simply showing log messages
instead.)
This is pretty untested, so expect bugs.
Fixes #4250.
2017-04-01 18:45:20 +00:00
|
|
|
write_screenshot(mpctx, image, filename, &opts, async);
|
2013-07-08 18:34:26 +00:00
|
|
|
talloc_free(image);
|
|
|
|
|
|
|
|
end:
|
|
|
|
ctx->osd = old_osd;
|
|
|
|
}
|
|
|
|
|
|
|
|
void screenshot_request(struct MPContext *mpctx, int mode, bool each_frame,
|
player: make screenshot commands honor the async flag
And also change input.conf to make all screenshots async. (Except the
every-frame mode, which always uses synchronous mode and ignores the
flag.) By default, the "screenshot" command is still asynchronous,
because scripts etc. might depend on this behavior.
This is only partially async. The code for determining the filename is
still always run synchronously. Only encoding the screenshot and writing
it to disk is asynchronous. We explicitly document the exact behavior as
undefined, so it can be changed any time.
Some of this is a bit messy, because I wanted to avoid duplicating the
message display code between sync and async mode. In async mode, this is
called from a worker thread, which is not safe because showing a message
accesses the thread-unsafe OSD code. So the core has to be locked during
this, which implies accessing the core and all that. So the code has
weird locking calls, and we need to do core destruction in a more
"controlled" manner (thus the outstanding_async field).
(What I'd really want would be the OSD simply showing log messages
instead.)
This is pretty untested, so expect bugs.
Fixes #4250.
2017-04-01 18:45:20 +00:00
|
|
|
bool osd, bool async)
|
2013-07-08 18:34:26 +00:00
|
|
|
{
|
|
|
|
screenshot_ctx *ctx = mpctx->screenshot_ctx;
|
|
|
|
|
2014-01-18 00:19:20 +00:00
|
|
|
if (mode == MODE_SUBTITLES && osd_get_render_subs_in_filter(mpctx->osd))
|
2013-07-08 18:34:26 +00:00
|
|
|
mode = 0;
|
|
|
|
|
|
|
|
if (each_frame) {
|
|
|
|
ctx->each_frame = !ctx->each_frame;
|
|
|
|
if (!ctx->each_frame)
|
|
|
|
return;
|
|
|
|
} else {
|
|
|
|
ctx->each_frame = false;
|
|
|
|
}
|
|
|
|
|
|
|
|
ctx->mode = mode;
|
|
|
|
ctx->osd = osd;
|
|
|
|
|
|
|
|
struct mp_image *image = screenshot_get(mpctx, mode);
|
|
|
|
|
|
|
|
if (image) {
|
player: make screenshot commands honor the async flag
And also change input.conf to make all screenshots async. (Except the
every-frame mode, which always uses synchronous mode and ignores the
flag.) By default, the "screenshot" command is still asynchronous,
because scripts etc. might depend on this behavior.
This is only partially async. The code for determining the filename is
still always run synchronously. Only encoding the screenshot and writing
it to disk is asynchronous. We explicitly document the exact behavior as
undefined, so it can be changed any time.
Some of this is a bit messy, because I wanted to avoid duplicating the
message display code between sync and async mode. In async mode, this is
called from a worker thread, which is not safe because showing a message
accesses the thread-unsafe OSD code. So the core has to be locked during
this, which implies accessing the core and all that. So the code has
weird locking calls, and we need to do core destruction in a more
"controlled" manner (thus the outstanding_async field).
(What I'd really want would be the OSD simply showing log messages
instead.)
This is pretty untested, so expect bugs.
Fixes #4250.
2017-04-01 18:45:20 +00:00
|
|
|
struct image_writer_opts *opts = mpctx->opts->screenshot_image_opts;
|
|
|
|
char *filename = gen_fname(ctx, image_writer_file_ext(opts));
|
|
|
|
if (filename)
|
|
|
|
write_screenshot(mpctx, image, filename, NULL, async);
|
|
|
|
talloc_free(filename);
|
2013-07-08 18:34:26 +00:00
|
|
|
} else {
|
2017-04-01 18:46:21 +00:00
|
|
|
screenshot_msg(ctx, MSGL_ERR, "Taking screenshot failed.");
|
2013-07-08 18:34:26 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
talloc_free(image);
|
2011-10-06 18:46:01 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
void screenshot_flip(struct MPContext *mpctx)
|
|
|
|
{
|
screenshot: make screenshot filenames configurable
This adds the --screenshot-template option, which specifies a template
for the filename used for a screenshot. The '%' character is parsed as
format specifier. These format specifiers insert metadata into the
filename. For example, '%f' is replaced with the filename of the
currently played file.
The following format specifiers are available:
%n Insert sequence number (padded with 4 zeros), e.g. "0002".
%0Nn Like %n, but pad to N zeros (N = 0 to 9).
%n behaves like %04n.
%#n Like %n, but reset the sequence counter on every screenshot.
(Useful if other parts in the template make the resulting
filename already mostly unique.)
%#0Nn Use %0Nn and %#n at the same time.
%f Insert filename of the currently played video.
%F Like %f, but with stripped file extension ("." and rest).
%p Insert current playback time, in HH:MM:SS format.
%P Like %p, but adds milliseconds: HH:MM:SS.mmmm
%tX Insert the current local date/time, using the date format X.
X is a single letter and is passed to strftime() as "%X".
E.g. "%td" inserts the number of the current day.
%{prop} Insert the value of the slave property 'prop'.
E.g. %{filename} is the same as %f. If the property doesn't
exist or is not available, nothing is inserted, unless a
fallback is specified as in %{prop:fallback text}.
%% Insert the character '%'.
The strings inserted by format specifiers will be checked for
characters not allowed in filenames (including '/' and '\'), and
replaced with the placeholder '_'. (This doesn't happen for text that
was passed with the --screenshot-template option, and allows specifying
a screenshot target directory by prefixing the template with a relative
or absolute path.)
2012-02-29 02:46:25 +00:00
|
|
|
screenshot_ctx *ctx = mpctx->screenshot_ctx;
|
2011-10-06 18:46:01 +00:00
|
|
|
|
|
|
|
if (!ctx->each_frame)
|
|
|
|
return;
|
|
|
|
|
2012-11-21 18:56:25 +00:00
|
|
|
ctx->each_frame = false;
|
player: make screenshot commands honor the async flag
And also change input.conf to make all screenshots async. (Except the
every-frame mode, which always uses synchronous mode and ignores the
flag.) By default, the "screenshot" command is still asynchronous,
because scripts etc. might depend on this behavior.
This is only partially async. The code for determining the filename is
still always run synchronously. Only encoding the screenshot and writing
it to disk is asynchronous. We explicitly document the exact behavior as
undefined, so it can be changed any time.
Some of this is a bit messy, because I wanted to avoid duplicating the
message display code between sync and async mode. In async mode, this is
called from a worker thread, which is not safe because showing a message
accesses the thread-unsafe OSD code. So the core has to be locked during
this, which implies accessing the core and all that. So the code has
weird locking calls, and we need to do core destruction in a more
"controlled" manner (thus the outstanding_async field).
(What I'd really want would be the OSD simply showing log messages
instead.)
This is pretty untested, so expect bugs.
Fixes #4250.
2017-04-01 18:45:20 +00:00
|
|
|
screenshot_request(mpctx, ctx->mode, true, ctx->osd, false);
|
2011-10-06 18:46:01 +00:00
|
|
|
}
|