mpv/demux/demux_edl.c

430 lines
14 KiB
C
Raw Normal View History

EDL: add support for new EDL file format The timeline code previously added to support Matroska ordered chapters allows constructing a playback timeline from segments picked from multiple source files. Add support for a new EDL format to make this machinery available for use with file formats other than Matroska and in a manner easier to use than creating files with ordered chapters. Unlike the old -edl option which specifies an additional file with edits to apply to the video file given as the main argument, the new EDL format is used by giving only the EDL file as the file to play; that file then contains the filename(s) to use as source files where actual video segments come from. Filename paths in the EDL file are ignored. Currently the source files are only searched for in the directory of the EDL file; support for a search path option will likely be added in the future. Format of the EDL files The first line in the file must be "mplayer EDL file, version 2". The rest of the lines belong to one of these classes: 1) lines specifying source files 2) empty lines 3) lines specifying timeline segments. Lines beginning with '<' specify source files. These lines first contain an identifier used to refer to the source file later, then the filename separated by whitespace. The identifier must start with a letter. Filenames that start or end with whitespace or contain newlines are not supported. On other lines '#' characters delimit comments. Lines that contain only whitespace after comments have been removed are ignored. Timeline segments must appear in the file in chronological order. Each segment has the following information associated with it: - duration - output start time - output end time (= output start time + duration) - source id (specifies the file the content of the segment comes from) - source start time (timestamp in the source file) - source end time (= source start time + duration) The output timestamps must form a continuous timeline from 0 to the end of the last segment, such that each new segment starts from the time the previous one ends at. Source files and times may change arbitrarily between segments. The general format for lines specifying timeline segments is [output time info] source_id [source time info] source_id must be an identifier defined on a '<' line. Both the time info parts consists of zero or more of the following elements: 1) timestamp 2) -timestamp 3) +duration 4) * 5) -* , where "timestamp" and "duration" are decimal numbers (computations are done with nanosecond precision). Whitespace around "+" and "-" is optional. 1) and 2) specify start and end time of the segment on output or source side. 3) specifies duration; the semantics are the same whether this appears on output or source side. 4) and 5) are ignored on the output side (they're always implicitly assumed). On the source side 4) specifies that the segment starts where the previous segment _using this source_ ended; if there was no previous segment time 0 is used. 5) specifies that the segment ends where the next segment using this source starts. Redundant information may be omitted. It will be filled in using the following rules: - output start for first segment is 0 - two of [output start, output end, duration] imply third - two of [source start, source end, duration] imply third - output start = output end of previous segment - output end = output start of next segment - if "*", source start = source end of earlier segment - if "-*", source end = source start of a later segment As a special rule, a last zero-duration segment without a source specification may appear. This will produce no corresponding segment in the resulting timeline, but can be used as syntax to specify the end time of the timeline (with effect equal to adding -time on the previous line). Examples: ----- begin ----- mplayer EDL file, version 2 < id1 filename 0 id1 123 100 id1 456 200 id1 789 300 ----- end ----- All segments come from the source file "filename". First segment (output time 0-100) comes from time 123-223, second 456-556, third 789-889. ----- begin ----- mplayer EDL file, version 2 < f filename f 60-120 f 600-660 f 30- 90 ----- end ----- Play first seconds 60-120 from the file, then 600-660, then 30-90. ----- begin ----- mplayer EDL file, version 2 < id1 filename1 < id2 filename2 +10 id1 * +10 id2 * +10 id1 * +10 id2 * +10 id1 * +10 id2 * ----- end ----- This plays time 0-10 from filename1, then 0-10 from filename1, then 10-20 from filename1, then 10-20 from filename2, then 20-30 from filename1, then 20-30 from filename2. ----- begin ----- mplayer EDL file, version 2 < t1 filename1 < t2 filename2 t1 * +2 # segment 1 +2 t2 100 # segment 2 t1 * # segment 3 t2 *-* # segment 4 t1 3 -* # segment 5 +0.111111 t2 102.5 # segment 6 7.37 t1 5 +1 # segment 7 ----- end ----- This rather pathological example illustrates the rules for filling in implied data. All the values can be determined by recursively applying the rules given above, and the full end result is this: +2 0-2 t1 0-2 # segment 1 +2 2-4 t2 100-102 # segment 2 +0.758889 4-4.758889 t1 2-2.758889 # segment 3 +0.5 4.4758889-5.258889 t2 102-102.5 # segment 4 +2 5.258889-7.258889 t1 3-5 # segment 5 +0.111111 7.258889-7.37 t2 102.5-102.611111 # segment 6 +1 7.37-8.37 t1 5-6 # segment 7
2011-02-14 11:05:35 +00:00
/*
* Original author: Uoti Urpala
*
* This file is part of mpv.
*
Relicense some non-MPlayer source files to LGPL 2.1 or later This covers source files which were added in mplayer2 and mpv times only, and where all code is covered by LGPL relicensing agreements. There are probably more files to which this applies, but I'm being conservative here. A file named ao_sdl.c exists in MPlayer too, but the mpv one is a complete rewrite, and was added some time after the original ao_sdl.c was removed. The same applies to vo_sdl.c, for which the SDL2 API is radically different in addition (MPlayer supports SDL 1.2 only). common.c contains only code written by me. But common.h is a strange case: although it originally was named mp_common.h and exists in MPlayer too, by now it contains only definitions written by uau and me. The exceptions are the CONTROL_ defines - thus not changing the license of common.h yet. codec_tags.c contained once large tables generated from MPlayer's codecs.conf, but all of these tables were removed. From demux_playlist.c I'm removing a code fragment from someone who was not asked; this probably could be done later (see commit 15dccc37). misc.c is a bit complicated to reason about (it was split off mplayer.c and thus contains random functions out of this file), but actually all functions have been added post-MPlayer. Except get_relative_time(), which was written by uau, but looks similar to 3 different versions of something similar in each of the Unix/win32/OSX timer source files. I'm not sure what that means in regards to copyright, so I've just moved it into another still-GPL source file for now. screenshot.c once had some minor parts of MPlayer's vf_screenshot.c, but they're all gone.
2016-01-19 17:36:06 +00:00
* mpv is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
EDL: add support for new EDL file format The timeline code previously added to support Matroska ordered chapters allows constructing a playback timeline from segments picked from multiple source files. Add support for a new EDL format to make this machinery available for use with file formats other than Matroska and in a manner easier to use than creating files with ordered chapters. Unlike the old -edl option which specifies an additional file with edits to apply to the video file given as the main argument, the new EDL format is used by giving only the EDL file as the file to play; that file then contains the filename(s) to use as source files where actual video segments come from. Filename paths in the EDL file are ignored. Currently the source files are only searched for in the directory of the EDL file; support for a search path option will likely be added in the future. Format of the EDL files The first line in the file must be "mplayer EDL file, version 2". The rest of the lines belong to one of these classes: 1) lines specifying source files 2) empty lines 3) lines specifying timeline segments. Lines beginning with '<' specify source files. These lines first contain an identifier used to refer to the source file later, then the filename separated by whitespace. The identifier must start with a letter. Filenames that start or end with whitespace or contain newlines are not supported. On other lines '#' characters delimit comments. Lines that contain only whitespace after comments have been removed are ignored. Timeline segments must appear in the file in chronological order. Each segment has the following information associated with it: - duration - output start time - output end time (= output start time + duration) - source id (specifies the file the content of the segment comes from) - source start time (timestamp in the source file) - source end time (= source start time + duration) The output timestamps must form a continuous timeline from 0 to the end of the last segment, such that each new segment starts from the time the previous one ends at. Source files and times may change arbitrarily between segments. The general format for lines specifying timeline segments is [output time info] source_id [source time info] source_id must be an identifier defined on a '<' line. Both the time info parts consists of zero or more of the following elements: 1) timestamp 2) -timestamp 3) +duration 4) * 5) -* , where "timestamp" and "duration" are decimal numbers (computations are done with nanosecond precision). Whitespace around "+" and "-" is optional. 1) and 2) specify start and end time of the segment on output or source side. 3) specifies duration; the semantics are the same whether this appears on output or source side. 4) and 5) are ignored on the output side (they're always implicitly assumed). On the source side 4) specifies that the segment starts where the previous segment _using this source_ ended; if there was no previous segment time 0 is used. 5) specifies that the segment ends where the next segment using this source starts. Redundant information may be omitted. It will be filled in using the following rules: - output start for first segment is 0 - two of [output start, output end, duration] imply third - two of [source start, source end, duration] imply third - output start = output end of previous segment - output end = output start of next segment - if "*", source start = source end of earlier segment - if "-*", source end = source start of a later segment As a special rule, a last zero-duration segment without a source specification may appear. This will produce no corresponding segment in the resulting timeline, but can be used as syntax to specify the end time of the timeline (with effect equal to adding -time on the previous line). Examples: ----- begin ----- mplayer EDL file, version 2 < id1 filename 0 id1 123 100 id1 456 200 id1 789 300 ----- end ----- All segments come from the source file "filename". First segment (output time 0-100) comes from time 123-223, second 456-556, third 789-889. ----- begin ----- mplayer EDL file, version 2 < f filename f 60-120 f 600-660 f 30- 90 ----- end ----- Play first seconds 60-120 from the file, then 600-660, then 30-90. ----- begin ----- mplayer EDL file, version 2 < id1 filename1 < id2 filename2 +10 id1 * +10 id2 * +10 id1 * +10 id2 * +10 id1 * +10 id2 * ----- end ----- This plays time 0-10 from filename1, then 0-10 from filename1, then 10-20 from filename1, then 10-20 from filename2, then 20-30 from filename1, then 20-30 from filename2. ----- begin ----- mplayer EDL file, version 2 < t1 filename1 < t2 filename2 t1 * +2 # segment 1 +2 t2 100 # segment 2 t1 * # segment 3 t2 *-* # segment 4 t1 3 -* # segment 5 +0.111111 t2 102.5 # segment 6 7.37 t1 5 +1 # segment 7 ----- end ----- This rather pathological example illustrates the rules for filling in implied data. All the values can be determined by recursively applying the rules given above, and the full end result is this: +2 0-2 t1 0-2 # segment 1 +2 2-4 t2 100-102 # segment 2 +0.758889 4-4.758889 t1 2-2.758889 # segment 3 +0.5 4.4758889-5.258889 t2 102-102.5 # segment 4 +2 5.258889-7.258889 t1 3-5 # segment 5 +0.111111 7.258889-7.37 t2 102.5-102.611111 # segment 6 +1 7.37-8.37 t1 5-6 # segment 7
2011-02-14 11:05:35 +00:00
*
* mpv is distributed in the hope that it will be useful,
EDL: add support for new EDL file format The timeline code previously added to support Matroska ordered chapters allows constructing a playback timeline from segments picked from multiple source files. Add support for a new EDL format to make this machinery available for use with file formats other than Matroska and in a manner easier to use than creating files with ordered chapters. Unlike the old -edl option which specifies an additional file with edits to apply to the video file given as the main argument, the new EDL format is used by giving only the EDL file as the file to play; that file then contains the filename(s) to use as source files where actual video segments come from. Filename paths in the EDL file are ignored. Currently the source files are only searched for in the directory of the EDL file; support for a search path option will likely be added in the future. Format of the EDL files The first line in the file must be "mplayer EDL file, version 2". The rest of the lines belong to one of these classes: 1) lines specifying source files 2) empty lines 3) lines specifying timeline segments. Lines beginning with '<' specify source files. These lines first contain an identifier used to refer to the source file later, then the filename separated by whitespace. The identifier must start with a letter. Filenames that start or end with whitespace or contain newlines are not supported. On other lines '#' characters delimit comments. Lines that contain only whitespace after comments have been removed are ignored. Timeline segments must appear in the file in chronological order. Each segment has the following information associated with it: - duration - output start time - output end time (= output start time + duration) - source id (specifies the file the content of the segment comes from) - source start time (timestamp in the source file) - source end time (= source start time + duration) The output timestamps must form a continuous timeline from 0 to the end of the last segment, such that each new segment starts from the time the previous one ends at. Source files and times may change arbitrarily between segments. The general format for lines specifying timeline segments is [output time info] source_id [source time info] source_id must be an identifier defined on a '<' line. Both the time info parts consists of zero or more of the following elements: 1) timestamp 2) -timestamp 3) +duration 4) * 5) -* , where "timestamp" and "duration" are decimal numbers (computations are done with nanosecond precision). Whitespace around "+" and "-" is optional. 1) and 2) specify start and end time of the segment on output or source side. 3) specifies duration; the semantics are the same whether this appears on output or source side. 4) and 5) are ignored on the output side (they're always implicitly assumed). On the source side 4) specifies that the segment starts where the previous segment _using this source_ ended; if there was no previous segment time 0 is used. 5) specifies that the segment ends where the next segment using this source starts. Redundant information may be omitted. It will be filled in using the following rules: - output start for first segment is 0 - two of [output start, output end, duration] imply third - two of [source start, source end, duration] imply third - output start = output end of previous segment - output end = output start of next segment - if "*", source start = source end of earlier segment - if "-*", source end = source start of a later segment As a special rule, a last zero-duration segment without a source specification may appear. This will produce no corresponding segment in the resulting timeline, but can be used as syntax to specify the end time of the timeline (with effect equal to adding -time on the previous line). Examples: ----- begin ----- mplayer EDL file, version 2 < id1 filename 0 id1 123 100 id1 456 200 id1 789 300 ----- end ----- All segments come from the source file "filename". First segment (output time 0-100) comes from time 123-223, second 456-556, third 789-889. ----- begin ----- mplayer EDL file, version 2 < f filename f 60-120 f 600-660 f 30- 90 ----- end ----- Play first seconds 60-120 from the file, then 600-660, then 30-90. ----- begin ----- mplayer EDL file, version 2 < id1 filename1 < id2 filename2 +10 id1 * +10 id2 * +10 id1 * +10 id2 * +10 id1 * +10 id2 * ----- end ----- This plays time 0-10 from filename1, then 0-10 from filename1, then 10-20 from filename1, then 10-20 from filename2, then 20-30 from filename1, then 20-30 from filename2. ----- begin ----- mplayer EDL file, version 2 < t1 filename1 < t2 filename2 t1 * +2 # segment 1 +2 t2 100 # segment 2 t1 * # segment 3 t2 *-* # segment 4 t1 3 -* # segment 5 +0.111111 t2 102.5 # segment 6 7.37 t1 5 +1 # segment 7 ----- end ----- This rather pathological example illustrates the rules for filling in implied data. All the values can be determined by recursively applying the rules given above, and the full end result is this: +2 0-2 t1 0-2 # segment 1 +2 2-4 t2 100-102 # segment 2 +0.758889 4-4.758889 t1 2-2.758889 # segment 3 +0.5 4.4758889-5.258889 t2 102-102.5 # segment 4 +2 5.258889-7.258889 t1 3-5 # segment 5 +0.111111 7.258889-7.37 t2 102.5-102.611111 # segment 6 +1 7.37-8.37 t1 5-6 # segment 7
2011-02-14 11:05:35 +00:00
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
Relicense some non-MPlayer source files to LGPL 2.1 or later This covers source files which were added in mplayer2 and mpv times only, and where all code is covered by LGPL relicensing agreements. There are probably more files to which this applies, but I'm being conservative here. A file named ao_sdl.c exists in MPlayer too, but the mpv one is a complete rewrite, and was added some time after the original ao_sdl.c was removed. The same applies to vo_sdl.c, for which the SDL2 API is radically different in addition (MPlayer supports SDL 1.2 only). common.c contains only code written by me. But common.h is a strange case: although it originally was named mp_common.h and exists in MPlayer too, by now it contains only definitions written by uau and me. The exceptions are the CONTROL_ defines - thus not changing the license of common.h yet. codec_tags.c contained once large tables generated from MPlayer's codecs.conf, but all of these tables were removed. From demux_playlist.c I'm removing a code fragment from someone who was not asked; this probably could be done later (see commit 15dccc37). misc.c is a bit complicated to reason about (it was split off mplayer.c and thus contains random functions out of this file), but actually all functions have been added post-MPlayer. Except get_relative_time(), which was written by uau, but looks similar to 3 different versions of something similar in each of the Unix/win32/OSX timer source files. I'm not sure what that means in regards to copyright, so I've just moved it into another still-GPL source file for now. screenshot.c once had some minor parts of MPlayer's vf_screenshot.c, but they're all gone.
2016-01-19 17:36:06 +00:00
* GNU Lesser General Public License for more details.
EDL: add support for new EDL file format The timeline code previously added to support Matroska ordered chapters allows constructing a playback timeline from segments picked from multiple source files. Add support for a new EDL format to make this machinery available for use with file formats other than Matroska and in a manner easier to use than creating files with ordered chapters. Unlike the old -edl option which specifies an additional file with edits to apply to the video file given as the main argument, the new EDL format is used by giving only the EDL file as the file to play; that file then contains the filename(s) to use as source files where actual video segments come from. Filename paths in the EDL file are ignored. Currently the source files are only searched for in the directory of the EDL file; support for a search path option will likely be added in the future. Format of the EDL files The first line in the file must be "mplayer EDL file, version 2". The rest of the lines belong to one of these classes: 1) lines specifying source files 2) empty lines 3) lines specifying timeline segments. Lines beginning with '<' specify source files. These lines first contain an identifier used to refer to the source file later, then the filename separated by whitespace. The identifier must start with a letter. Filenames that start or end with whitespace or contain newlines are not supported. On other lines '#' characters delimit comments. Lines that contain only whitespace after comments have been removed are ignored. Timeline segments must appear in the file in chronological order. Each segment has the following information associated with it: - duration - output start time - output end time (= output start time + duration) - source id (specifies the file the content of the segment comes from) - source start time (timestamp in the source file) - source end time (= source start time + duration) The output timestamps must form a continuous timeline from 0 to the end of the last segment, such that each new segment starts from the time the previous one ends at. Source files and times may change arbitrarily between segments. The general format for lines specifying timeline segments is [output time info] source_id [source time info] source_id must be an identifier defined on a '<' line. Both the time info parts consists of zero or more of the following elements: 1) timestamp 2) -timestamp 3) +duration 4) * 5) -* , where "timestamp" and "duration" are decimal numbers (computations are done with nanosecond precision). Whitespace around "+" and "-" is optional. 1) and 2) specify start and end time of the segment on output or source side. 3) specifies duration; the semantics are the same whether this appears on output or source side. 4) and 5) are ignored on the output side (they're always implicitly assumed). On the source side 4) specifies that the segment starts where the previous segment _using this source_ ended; if there was no previous segment time 0 is used. 5) specifies that the segment ends where the next segment using this source starts. Redundant information may be omitted. It will be filled in using the following rules: - output start for first segment is 0 - two of [output start, output end, duration] imply third - two of [source start, source end, duration] imply third - output start = output end of previous segment - output end = output start of next segment - if "*", source start = source end of earlier segment - if "-*", source end = source start of a later segment As a special rule, a last zero-duration segment without a source specification may appear. This will produce no corresponding segment in the resulting timeline, but can be used as syntax to specify the end time of the timeline (with effect equal to adding -time on the previous line). Examples: ----- begin ----- mplayer EDL file, version 2 < id1 filename 0 id1 123 100 id1 456 200 id1 789 300 ----- end ----- All segments come from the source file "filename". First segment (output time 0-100) comes from time 123-223, second 456-556, third 789-889. ----- begin ----- mplayer EDL file, version 2 < f filename f 60-120 f 600-660 f 30- 90 ----- end ----- Play first seconds 60-120 from the file, then 600-660, then 30-90. ----- begin ----- mplayer EDL file, version 2 < id1 filename1 < id2 filename2 +10 id1 * +10 id2 * +10 id1 * +10 id2 * +10 id1 * +10 id2 * ----- end ----- This plays time 0-10 from filename1, then 0-10 from filename1, then 10-20 from filename1, then 10-20 from filename2, then 20-30 from filename1, then 20-30 from filename2. ----- begin ----- mplayer EDL file, version 2 < t1 filename1 < t2 filename2 t1 * +2 # segment 1 +2 t2 100 # segment 2 t1 * # segment 3 t2 *-* # segment 4 t1 3 -* # segment 5 +0.111111 t2 102.5 # segment 6 7.37 t1 5 +1 # segment 7 ----- end ----- This rather pathological example illustrates the rules for filling in implied data. All the values can be determined by recursively applying the rules given above, and the full end result is this: +2 0-2 t1 0-2 # segment 1 +2 2-4 t2 100-102 # segment 2 +0.758889 4-4.758889 t1 2-2.758889 # segment 3 +0.5 4.4758889-5.258889 t2 102-102.5 # segment 4 +2 5.258889-7.258889 t1 3-5 # segment 5 +0.111111 7.258889-7.37 t2 102.5-102.611111 # segment 6 +1 7.37-8.37 t1 5-6 # segment 7
2011-02-14 11:05:35 +00:00
*
Relicense some non-MPlayer source files to LGPL 2.1 or later This covers source files which were added in mplayer2 and mpv times only, and where all code is covered by LGPL relicensing agreements. There are probably more files to which this applies, but I'm being conservative here. A file named ao_sdl.c exists in MPlayer too, but the mpv one is a complete rewrite, and was added some time after the original ao_sdl.c was removed. The same applies to vo_sdl.c, for which the SDL2 API is radically different in addition (MPlayer supports SDL 1.2 only). common.c contains only code written by me. But common.h is a strange case: although it originally was named mp_common.h and exists in MPlayer too, by now it contains only definitions written by uau and me. The exceptions are the CONTROL_ defines - thus not changing the license of common.h yet. codec_tags.c contained once large tables generated from MPlayer's codecs.conf, but all of these tables were removed. From demux_playlist.c I'm removing a code fragment from someone who was not asked; this probably could be done later (see commit 15dccc37). misc.c is a bit complicated to reason about (it was split off mplayer.c and thus contains random functions out of this file), but actually all functions have been added post-MPlayer. Except get_relative_time(), which was written by uau, but looks similar to 3 different versions of something similar in each of the Unix/win32/OSX timer source files. I'm not sure what that means in regards to copyright, so I've just moved it into another still-GPL source file for now. screenshot.c once had some minor parts of MPlayer's vf_screenshot.c, but they're all gone.
2016-01-19 17:36:06 +00:00
* You should have received a copy of the GNU Lesser General Public
* License along with mpv. If not, see <http://www.gnu.org/licenses/>.
EDL: add support for new EDL file format The timeline code previously added to support Matroska ordered chapters allows constructing a playback timeline from segments picked from multiple source files. Add support for a new EDL format to make this machinery available for use with file formats other than Matroska and in a manner easier to use than creating files with ordered chapters. Unlike the old -edl option which specifies an additional file with edits to apply to the video file given as the main argument, the new EDL format is used by giving only the EDL file as the file to play; that file then contains the filename(s) to use as source files where actual video segments come from. Filename paths in the EDL file are ignored. Currently the source files are only searched for in the directory of the EDL file; support for a search path option will likely be added in the future. Format of the EDL files The first line in the file must be "mplayer EDL file, version 2". The rest of the lines belong to one of these classes: 1) lines specifying source files 2) empty lines 3) lines specifying timeline segments. Lines beginning with '<' specify source files. These lines first contain an identifier used to refer to the source file later, then the filename separated by whitespace. The identifier must start with a letter. Filenames that start or end with whitespace or contain newlines are not supported. On other lines '#' characters delimit comments. Lines that contain only whitespace after comments have been removed are ignored. Timeline segments must appear in the file in chronological order. Each segment has the following information associated with it: - duration - output start time - output end time (= output start time + duration) - source id (specifies the file the content of the segment comes from) - source start time (timestamp in the source file) - source end time (= source start time + duration) The output timestamps must form a continuous timeline from 0 to the end of the last segment, such that each new segment starts from the time the previous one ends at. Source files and times may change arbitrarily between segments. The general format for lines specifying timeline segments is [output time info] source_id [source time info] source_id must be an identifier defined on a '<' line. Both the time info parts consists of zero or more of the following elements: 1) timestamp 2) -timestamp 3) +duration 4) * 5) -* , where "timestamp" and "duration" are decimal numbers (computations are done with nanosecond precision). Whitespace around "+" and "-" is optional. 1) and 2) specify start and end time of the segment on output or source side. 3) specifies duration; the semantics are the same whether this appears on output or source side. 4) and 5) are ignored on the output side (they're always implicitly assumed). On the source side 4) specifies that the segment starts where the previous segment _using this source_ ended; if there was no previous segment time 0 is used. 5) specifies that the segment ends where the next segment using this source starts. Redundant information may be omitted. It will be filled in using the following rules: - output start for first segment is 0 - two of [output start, output end, duration] imply third - two of [source start, source end, duration] imply third - output start = output end of previous segment - output end = output start of next segment - if "*", source start = source end of earlier segment - if "-*", source end = source start of a later segment As a special rule, a last zero-duration segment without a source specification may appear. This will produce no corresponding segment in the resulting timeline, but can be used as syntax to specify the end time of the timeline (with effect equal to adding -time on the previous line). Examples: ----- begin ----- mplayer EDL file, version 2 < id1 filename 0 id1 123 100 id1 456 200 id1 789 300 ----- end ----- All segments come from the source file "filename". First segment (output time 0-100) comes from time 123-223, second 456-556, third 789-889. ----- begin ----- mplayer EDL file, version 2 < f filename f 60-120 f 600-660 f 30- 90 ----- end ----- Play first seconds 60-120 from the file, then 600-660, then 30-90. ----- begin ----- mplayer EDL file, version 2 < id1 filename1 < id2 filename2 +10 id1 * +10 id2 * +10 id1 * +10 id2 * +10 id1 * +10 id2 * ----- end ----- This plays time 0-10 from filename1, then 0-10 from filename1, then 10-20 from filename1, then 10-20 from filename2, then 20-30 from filename1, then 20-30 from filename2. ----- begin ----- mplayer EDL file, version 2 < t1 filename1 < t2 filename2 t1 * +2 # segment 1 +2 t2 100 # segment 2 t1 * # segment 3 t2 *-* # segment 4 t1 3 -* # segment 5 +0.111111 t2 102.5 # segment 6 7.37 t1 5 +1 # segment 7 ----- end ----- This rather pathological example illustrates the rules for filling in implied data. All the values can be determined by recursively applying the rules given above, and the full end result is this: +2 0-2 t1 0-2 # segment 1 +2 2-4 t2 100-102 # segment 2 +0.758889 4-4.758889 t1 2-2.758889 # segment 3 +0.5 4.4758889-5.258889 t2 102-102.5 # segment 4 +2 5.258889-7.258889 t1 3-5 # segment 5 +0.111111 7.258889-7.37 t2 102.5-102.611111 # segment 6 +1 7.37-8.37 t1 5-6 # segment 7
2011-02-14 11:05:35 +00:00
*/
#include <stdlib.h>
#include <stdbool.h>
#include <string.h>
#include <inttypes.h>
#include <math.h>
EDL: add support for new EDL file format The timeline code previously added to support Matroska ordered chapters allows constructing a playback timeline from segments picked from multiple source files. Add support for a new EDL format to make this machinery available for use with file formats other than Matroska and in a manner easier to use than creating files with ordered chapters. Unlike the old -edl option which specifies an additional file with edits to apply to the video file given as the main argument, the new EDL format is used by giving only the EDL file as the file to play; that file then contains the filename(s) to use as source files where actual video segments come from. Filename paths in the EDL file are ignored. Currently the source files are only searched for in the directory of the EDL file; support for a search path option will likely be added in the future. Format of the EDL files The first line in the file must be "mplayer EDL file, version 2". The rest of the lines belong to one of these classes: 1) lines specifying source files 2) empty lines 3) lines specifying timeline segments. Lines beginning with '<' specify source files. These lines first contain an identifier used to refer to the source file later, then the filename separated by whitespace. The identifier must start with a letter. Filenames that start or end with whitespace or contain newlines are not supported. On other lines '#' characters delimit comments. Lines that contain only whitespace after comments have been removed are ignored. Timeline segments must appear in the file in chronological order. Each segment has the following information associated with it: - duration - output start time - output end time (= output start time + duration) - source id (specifies the file the content of the segment comes from) - source start time (timestamp in the source file) - source end time (= source start time + duration) The output timestamps must form a continuous timeline from 0 to the end of the last segment, such that each new segment starts from the time the previous one ends at. Source files and times may change arbitrarily between segments. The general format for lines specifying timeline segments is [output time info] source_id [source time info] source_id must be an identifier defined on a '<' line. Both the time info parts consists of zero or more of the following elements: 1) timestamp 2) -timestamp 3) +duration 4) * 5) -* , where "timestamp" and "duration" are decimal numbers (computations are done with nanosecond precision). Whitespace around "+" and "-" is optional. 1) and 2) specify start and end time of the segment on output or source side. 3) specifies duration; the semantics are the same whether this appears on output or source side. 4) and 5) are ignored on the output side (they're always implicitly assumed). On the source side 4) specifies that the segment starts where the previous segment _using this source_ ended; if there was no previous segment time 0 is used. 5) specifies that the segment ends where the next segment using this source starts. Redundant information may be omitted. It will be filled in using the following rules: - output start for first segment is 0 - two of [output start, output end, duration] imply third - two of [source start, source end, duration] imply third - output start = output end of previous segment - output end = output start of next segment - if "*", source start = source end of earlier segment - if "-*", source end = source start of a later segment As a special rule, a last zero-duration segment without a source specification may appear. This will produce no corresponding segment in the resulting timeline, but can be used as syntax to specify the end time of the timeline (with effect equal to adding -time on the previous line). Examples: ----- begin ----- mplayer EDL file, version 2 < id1 filename 0 id1 123 100 id1 456 200 id1 789 300 ----- end ----- All segments come from the source file "filename". First segment (output time 0-100) comes from time 123-223, second 456-556, third 789-889. ----- begin ----- mplayer EDL file, version 2 < f filename f 60-120 f 600-660 f 30- 90 ----- end ----- Play first seconds 60-120 from the file, then 600-660, then 30-90. ----- begin ----- mplayer EDL file, version 2 < id1 filename1 < id2 filename2 +10 id1 * +10 id2 * +10 id1 * +10 id2 * +10 id1 * +10 id2 * ----- end ----- This plays time 0-10 from filename1, then 0-10 from filename1, then 10-20 from filename1, then 10-20 from filename2, then 20-30 from filename1, then 20-30 from filename2. ----- begin ----- mplayer EDL file, version 2 < t1 filename1 < t2 filename2 t1 * +2 # segment 1 +2 t2 100 # segment 2 t1 * # segment 3 t2 *-* # segment 4 t1 3 -* # segment 5 +0.111111 t2 102.5 # segment 6 7.37 t1 5 +1 # segment 7 ----- end ----- This rather pathological example illustrates the rules for filling in implied data. All the values can be determined by recursively applying the rules given above, and the full end result is this: +2 0-2 t1 0-2 # segment 1 +2 2-4 t2 100-102 # segment 2 +0.758889 4-4.758889 t1 2-2.758889 # segment 3 +0.5 4.4758889-5.258889 t2 102-102.5 # segment 4 +2 5.258889-7.258889 t1 3-5 # segment 5 +0.111111 7.258889-7.37 t2 102.5-102.611111 # segment 6 +1 7.37-8.37 t1 5-6 # segment 7
2011-02-14 11:05:35 +00:00
#include "mpv_talloc.h"
#include "demux.h"
#include "timeline.h"
#include "common/msg.h"
#include "options/path.h"
#include "misc/bstr.h"
#include "common/common.h"
EDL: add support for new EDL file format The timeline code previously added to support Matroska ordered chapters allows constructing a playback timeline from segments picked from multiple source files. Add support for a new EDL format to make this machinery available for use with file formats other than Matroska and in a manner easier to use than creating files with ordered chapters. Unlike the old -edl option which specifies an additional file with edits to apply to the video file given as the main argument, the new EDL format is used by giving only the EDL file as the file to play; that file then contains the filename(s) to use as source files where actual video segments come from. Filename paths in the EDL file are ignored. Currently the source files are only searched for in the directory of the EDL file; support for a search path option will likely be added in the future. Format of the EDL files The first line in the file must be "mplayer EDL file, version 2". The rest of the lines belong to one of these classes: 1) lines specifying source files 2) empty lines 3) lines specifying timeline segments. Lines beginning with '<' specify source files. These lines first contain an identifier used to refer to the source file later, then the filename separated by whitespace. The identifier must start with a letter. Filenames that start or end with whitespace or contain newlines are not supported. On other lines '#' characters delimit comments. Lines that contain only whitespace after comments have been removed are ignored. Timeline segments must appear in the file in chronological order. Each segment has the following information associated with it: - duration - output start time - output end time (= output start time + duration) - source id (specifies the file the content of the segment comes from) - source start time (timestamp in the source file) - source end time (= source start time + duration) The output timestamps must form a continuous timeline from 0 to the end of the last segment, such that each new segment starts from the time the previous one ends at. Source files and times may change arbitrarily between segments. The general format for lines specifying timeline segments is [output time info] source_id [source time info] source_id must be an identifier defined on a '<' line. Both the time info parts consists of zero or more of the following elements: 1) timestamp 2) -timestamp 3) +duration 4) * 5) -* , where "timestamp" and "duration" are decimal numbers (computations are done with nanosecond precision). Whitespace around "+" and "-" is optional. 1) and 2) specify start and end time of the segment on output or source side. 3) specifies duration; the semantics are the same whether this appears on output or source side. 4) and 5) are ignored on the output side (they're always implicitly assumed). On the source side 4) specifies that the segment starts where the previous segment _using this source_ ended; if there was no previous segment time 0 is used. 5) specifies that the segment ends where the next segment using this source starts. Redundant information may be omitted. It will be filled in using the following rules: - output start for first segment is 0 - two of [output start, output end, duration] imply third - two of [source start, source end, duration] imply third - output start = output end of previous segment - output end = output start of next segment - if "*", source start = source end of earlier segment - if "-*", source end = source start of a later segment As a special rule, a last zero-duration segment without a source specification may appear. This will produce no corresponding segment in the resulting timeline, but can be used as syntax to specify the end time of the timeline (with effect equal to adding -time on the previous line). Examples: ----- begin ----- mplayer EDL file, version 2 < id1 filename 0 id1 123 100 id1 456 200 id1 789 300 ----- end ----- All segments come from the source file "filename". First segment (output time 0-100) comes from time 123-223, second 456-556, third 789-889. ----- begin ----- mplayer EDL file, version 2 < f filename f 60-120 f 600-660 f 30- 90 ----- end ----- Play first seconds 60-120 from the file, then 600-660, then 30-90. ----- begin ----- mplayer EDL file, version 2 < id1 filename1 < id2 filename2 +10 id1 * +10 id2 * +10 id1 * +10 id2 * +10 id1 * +10 id2 * ----- end ----- This plays time 0-10 from filename1, then 0-10 from filename1, then 10-20 from filename1, then 10-20 from filename2, then 20-30 from filename1, then 20-30 from filename2. ----- begin ----- mplayer EDL file, version 2 < t1 filename1 < t2 filename2 t1 * +2 # segment 1 +2 t2 100 # segment 2 t1 * # segment 3 t2 *-* # segment 4 t1 3 -* # segment 5 +0.111111 t2 102.5 # segment 6 7.37 t1 5 +1 # segment 7 ----- end ----- This rather pathological example illustrates the rules for filling in implied data. All the values can be determined by recursively applying the rules given above, and the full end result is this: +2 0-2 t1 0-2 # segment 1 +2 2-4 t2 100-102 # segment 2 +0.758889 4-4.758889 t1 2-2.758889 # segment 3 +0.5 4.4758889-5.258889 t2 102-102.5 # segment 4 +2 5.258889-7.258889 t1 3-5 # segment 5 +0.111111 7.258889-7.37 t2 102.5-102.611111 # segment 6 +1 7.37-8.37 t1 5-6 # segment 7
2011-02-14 11:05:35 +00:00
#include "stream/stream.h"
#define HEADER "# mpv EDL v0\n"
struct tl_part {
char *filename; // what is stream_open()ed
double offset; // offset into the source file
bool offset_set;
bool chapter_ts;
double length; // length of the part (-1 if rest of the file)
char *title;
};
struct tl_parts {
bool disable_chapters;
bool dash;
char *init_fragment_url;
struct tl_part *parts;
int num_parts;
demux, demux_edl: add extension for tracks sourced from separate streams This commit adds an extension to mpv EDL, which basically allows you to do the same as --audio-file, --external-file, etc. in a single EDL file. This is a relatively quick & dirty implementation. The dirty part lies in the fact that several shortcuts are taken. For example, struct timeline now forms a singly linked list, which is really weird, but also means the other timeline using demuxers (cue, mkv) don't need to be touched. Also, memory management becomes even worse (weird object ownership rules that are just fragile WTFs). There are some other dubious small changes, mostly related to the weird representation of separate streams. demux_timeline.c contains the actual implementation of the separate stream handling. For the most part, most things that used to be on the top level are now in struct virtual_source, of which one for each separate stream exists. This is basically like running multiple demux_edl.c in parallel. Some changes could strictly speaking be split into a separate commit, such as the stream_map type change. Mostly untested. Seems to work for the intended purpose. Potential for regressions for other timeline uses (like ordered chapters) is probably low. One thing which could definitely break and which I didn't test is the pseudo-DASH fragmented EDL code, of which ytdl can trigger various forms in obscure situations. (Uh why don't we have a test suite.) Background: The intention is to use this for the ytdl wrapper. A certain streaming site from a particularly brain damaged and plain evil Silicon Valley company usually provides streams as separate audio and video streams. The ytdl wrapper simply does use audio-add (i.e. adding it as external track, like with --audio-file), which works mostly fine. Unfortunately, mpv manages caching completely separately for external files. This has the following potential problems: 1. Seek ranges are rendered incorrectly. They always use the "main" stream, in this case the video stream. E.g. clicking into a cached range on the OSC could trigger a low level seek if the audio stream is actually not cached at the target position. 2. The stream cache bloats unnecessarily. Each stream may allocate the full configured maximum cache size, which is not what the user intends to do. Cached ranges are not pruned the same way, which creates disjoint cache ranges, which only use memory and won't help with fast seeking or playback. 3. mpv will try to aggressively read from both streams. This is done from different threads, with no regard which stream is more important. So it might happen that one stream starves the other one, especially if they have different bitrates. 4. Every stream will use a separate thread, which is an unnecessary waste of system resources. In theory, the following solutions are available (this commit works towards D): A. Centrally manage reading and caching of all streams. A single thread would do all I/O, and decide from which stream it should read next. As long as the total TCP/socket buffering is not too high, this should be effective to avoid starvation issues. This can also manage the cached ranges better. It would also get rid of the quite useless additional demuxer threads. This solution is conceptually simple, but requires refactoring the entire demuxer middle layer. B. Attempt to coordinate the demuxer threads. This would maintain a shared cache and readahead state to solve the mentioned problems explicitly. While this sounds simple and like an incremental change, it's probably hard to implement, creates more messy special cases, solution A. seems just a better and simpler variant of this. (On the other hand, A. requires refactoring more code.) C. Render an intersection of the seek ranges across all streams. This fixes only problem 1. D. Merge all streams in a dedicated wrapper demuxer. The general demuxer layer remains unchanged, and reading from separate streams is handled as special case. This effectively achieves the same as A. In particular, caching is simply handled by the usual demuxer cache layer, which sees the wrapper demuxer as a single stream of interleaved packets. One implementation variant of this is to reuse the EDL infrastructure, which this commit does. All in all, solution A would be preferable, because it's cleaner and works for all external streams in general. Some previous commit tried to prepare for implementing solution A. This could still happen. But it could take years until this is finally seriously started and finished. In any case, this commit doesn't block or complicate such attempts, which is also why it's the way to go. It's worth mentioning that original mplayer handles external files by creating a wrapper demuxer. This is like a less ideal mixture of A. and D. (The similarity with A. is that extending the mplayer approach to be fully dynamic and without certain disadvantages caused by the wrapper would end up with A. anyway. The similarity with D. is that due to the wrapper, no higher level code needs to be changed.)
2019-01-04 12:09:02 +00:00
struct tl_parts *next;
};
struct priv {
bstr data;
bool allow_any;
};
// Parse a time (absolute file time or duration). Currently equivalent to a
// number. Return false on failure.
static bool parse_time(bstr str, double *out_time)
{
bstr rest;
double time = bstrtod(str, &rest);
if (!str.len || rest.len || !isfinite(time))
return false;
*out_time = time;
return true;
}
/* Returns a list of parts, or NULL on parse error.
* Syntax (without file header or URI prefix):
* url ::= <entry> ( (';' | '\n') <entry> )*
* entry ::= <param> ( <param> ',' )*
* param ::= [<string> '='] (<string> | '%' <number> '%' <bytes>)
*/
static struct tl_parts *parse_edl(bstr str)
{
struct tl_parts *tl = talloc_zero(NULL, struct tl_parts);
demux, demux_edl: add extension for tracks sourced from separate streams This commit adds an extension to mpv EDL, which basically allows you to do the same as --audio-file, --external-file, etc. in a single EDL file. This is a relatively quick & dirty implementation. The dirty part lies in the fact that several shortcuts are taken. For example, struct timeline now forms a singly linked list, which is really weird, but also means the other timeline using demuxers (cue, mkv) don't need to be touched. Also, memory management becomes even worse (weird object ownership rules that are just fragile WTFs). There are some other dubious small changes, mostly related to the weird representation of separate streams. demux_timeline.c contains the actual implementation of the separate stream handling. For the most part, most things that used to be on the top level are now in struct virtual_source, of which one for each separate stream exists. This is basically like running multiple demux_edl.c in parallel. Some changes could strictly speaking be split into a separate commit, such as the stream_map type change. Mostly untested. Seems to work for the intended purpose. Potential for regressions for other timeline uses (like ordered chapters) is probably low. One thing which could definitely break and which I didn't test is the pseudo-DASH fragmented EDL code, of which ytdl can trigger various forms in obscure situations. (Uh why don't we have a test suite.) Background: The intention is to use this for the ytdl wrapper. A certain streaming site from a particularly brain damaged and plain evil Silicon Valley company usually provides streams as separate audio and video streams. The ytdl wrapper simply does use audio-add (i.e. adding it as external track, like with --audio-file), which works mostly fine. Unfortunately, mpv manages caching completely separately for external files. This has the following potential problems: 1. Seek ranges are rendered incorrectly. They always use the "main" stream, in this case the video stream. E.g. clicking into a cached range on the OSC could trigger a low level seek if the audio stream is actually not cached at the target position. 2. The stream cache bloats unnecessarily. Each stream may allocate the full configured maximum cache size, which is not what the user intends to do. Cached ranges are not pruned the same way, which creates disjoint cache ranges, which only use memory and won't help with fast seeking or playback. 3. mpv will try to aggressively read from both streams. This is done from different threads, with no regard which stream is more important. So it might happen that one stream starves the other one, especially if they have different bitrates. 4. Every stream will use a separate thread, which is an unnecessary waste of system resources. In theory, the following solutions are available (this commit works towards D): A. Centrally manage reading and caching of all streams. A single thread would do all I/O, and decide from which stream it should read next. As long as the total TCP/socket buffering is not too high, this should be effective to avoid starvation issues. This can also manage the cached ranges better. It would also get rid of the quite useless additional demuxer threads. This solution is conceptually simple, but requires refactoring the entire demuxer middle layer. B. Attempt to coordinate the demuxer threads. This would maintain a shared cache and readahead state to solve the mentioned problems explicitly. While this sounds simple and like an incremental change, it's probably hard to implement, creates more messy special cases, solution A. seems just a better and simpler variant of this. (On the other hand, A. requires refactoring more code.) C. Render an intersection of the seek ranges across all streams. This fixes only problem 1. D. Merge all streams in a dedicated wrapper demuxer. The general demuxer layer remains unchanged, and reading from separate streams is handled as special case. This effectively achieves the same as A. In particular, caching is simply handled by the usual demuxer cache layer, which sees the wrapper demuxer as a single stream of interleaved packets. One implementation variant of this is to reuse the EDL infrastructure, which this commit does. All in all, solution A would be preferable, because it's cleaner and works for all external streams in general. Some previous commit tried to prepare for implementing solution A. This could still happen. But it could take years until this is finally seriously started and finished. In any case, this commit doesn't block or complicate such attempts, which is also why it's the way to go. It's worth mentioning that original mplayer handles external files by creating a wrapper demuxer. This is like a less ideal mixture of A. and D. (The similarity with A. is that extending the mplayer approach to be fully dynamic and without certain disadvantages caused by the wrapper would end up with A. anyway. The similarity with D. is that due to the wrapper, no higher level code needs to be changed.)
2019-01-04 12:09:02 +00:00
struct tl_parts *root = tl;
while (str.len) {
if (bstr_eatstart0(&str, "#")) {
bstr_split_tok(str, "\n", &(bstr){0}, &str);
continue;
}
if (bstr_eatstart0(&str, "\n") || bstr_eatstart0(&str, ";"))
continue;
bool is_header = bstr_eatstart0(&str, "!");
bstr f_type = {0};
bstr f_init = {0};
struct tl_part p = { .length = -1 };
int nparam = 0;
while (1) {
bstr name, val;
// Check if it's of the form "name=..."
int next = bstrcspn(str, "=%,;\n");
if (next > 0 && next < str.len && str.start[next] == '=') {
name = bstr_splice(str, 0, next);
str = bstr_cut(str, next + 1);
} else if (is_header) {
const char *names[] = {"type"}; // implied name
name = bstr0(nparam < 1 ? names[nparam] : "-");
} else {
const char *names[] = {"file", "start", "length"}; // implied name
name = bstr0(nparam < 3 ? names[nparam] : "-");
}
if (bstr_eatstart0(&str, "%")) {
int len = bstrtoll(str, &str, 0);
if (!bstr_startswith0(str, "%") || (len > str.len - 1))
goto error;
val = bstr_splice(str, 1, len + 1);
str = bstr_cut(str, len + 1);
} else {
next = bstrcspn(str, ",;\n");
val = bstr_splice(str, 0, next);
str = bstr_cut(str, next);
}
// Interpret parameters. Explicitly ignore unknown ones.
if (is_header) {
if (bstr_equals0(name, "type")) {
f_type = val;
} else if (bstr_equals0(name, "init")) {
f_init = val;
}
} else {
if (bstr_equals0(name, "file")) {
p.filename = bstrto0(tl, val);
} else if (bstr_equals0(name, "start")) {
if (!parse_time(val, &p.offset))
goto error;
p.offset_set = true;
} else if (bstr_equals0(name, "length")) {
if (!parse_time(val, &p.length))
goto error;
} else if (bstr_equals0(name, "timestamps")) {
if (bstr_equals0(val, "chapters"))
p.chapter_ts = true;
} else if (bstr_equals0(name, "title")) {
p.title = bstrto0(tl, val);
}
}
nparam++;
if (!bstr_eatstart0(&str, ","))
break;
}
if (is_header) {
if (bstr_equals0(f_type, "mp4_dash")) {
tl->dash = true;
if (f_init.len)
tl->init_fragment_url = bstrto0(tl, f_init);
} else if (bstr_equals0(f_type, "new_stream")) {
demux, demux_edl: add extension for tracks sourced from separate streams This commit adds an extension to mpv EDL, which basically allows you to do the same as --audio-file, --external-file, etc. in a single EDL file. This is a relatively quick & dirty implementation. The dirty part lies in the fact that several shortcuts are taken. For example, struct timeline now forms a singly linked list, which is really weird, but also means the other timeline using demuxers (cue, mkv) don't need to be touched. Also, memory management becomes even worse (weird object ownership rules that are just fragile WTFs). There are some other dubious small changes, mostly related to the weird representation of separate streams. demux_timeline.c contains the actual implementation of the separate stream handling. For the most part, most things that used to be on the top level are now in struct virtual_source, of which one for each separate stream exists. This is basically like running multiple demux_edl.c in parallel. Some changes could strictly speaking be split into a separate commit, such as the stream_map type change. Mostly untested. Seems to work for the intended purpose. Potential for regressions for other timeline uses (like ordered chapters) is probably low. One thing which could definitely break and which I didn't test is the pseudo-DASH fragmented EDL code, of which ytdl can trigger various forms in obscure situations. (Uh why don't we have a test suite.) Background: The intention is to use this for the ytdl wrapper. A certain streaming site from a particularly brain damaged and plain evil Silicon Valley company usually provides streams as separate audio and video streams. The ytdl wrapper simply does use audio-add (i.e. adding it as external track, like with --audio-file), which works mostly fine. Unfortunately, mpv manages caching completely separately for external files. This has the following potential problems: 1. Seek ranges are rendered incorrectly. They always use the "main" stream, in this case the video stream. E.g. clicking into a cached range on the OSC could trigger a low level seek if the audio stream is actually not cached at the target position. 2. The stream cache bloats unnecessarily. Each stream may allocate the full configured maximum cache size, which is not what the user intends to do. Cached ranges are not pruned the same way, which creates disjoint cache ranges, which only use memory and won't help with fast seeking or playback. 3. mpv will try to aggressively read from both streams. This is done from different threads, with no regard which stream is more important. So it might happen that one stream starves the other one, especially if they have different bitrates. 4. Every stream will use a separate thread, which is an unnecessary waste of system resources. In theory, the following solutions are available (this commit works towards D): A. Centrally manage reading and caching of all streams. A single thread would do all I/O, and decide from which stream it should read next. As long as the total TCP/socket buffering is not too high, this should be effective to avoid starvation issues. This can also manage the cached ranges better. It would also get rid of the quite useless additional demuxer threads. This solution is conceptually simple, but requires refactoring the entire demuxer middle layer. B. Attempt to coordinate the demuxer threads. This would maintain a shared cache and readahead state to solve the mentioned problems explicitly. While this sounds simple and like an incremental change, it's probably hard to implement, creates more messy special cases, solution A. seems just a better and simpler variant of this. (On the other hand, A. requires refactoring more code.) C. Render an intersection of the seek ranges across all streams. This fixes only problem 1. D. Merge all streams in a dedicated wrapper demuxer. The general demuxer layer remains unchanged, and reading from separate streams is handled as special case. This effectively achieves the same as A. In particular, caching is simply handled by the usual demuxer cache layer, which sees the wrapper demuxer as a single stream of interleaved packets. One implementation variant of this is to reuse the EDL infrastructure, which this commit does. All in all, solution A would be preferable, because it's cleaner and works for all external streams in general. Some previous commit tried to prepare for implementing solution A. This could still happen. But it could take years until this is finally seriously started and finished. In any case, this commit doesn't block or complicate such attempts, which is also why it's the way to go. It's worth mentioning that original mplayer handles external files by creating a wrapper demuxer. This is like a less ideal mixture of A. and D. (The similarity with A. is that extending the mplayer approach to be fully dynamic and without certain disadvantages caused by the wrapper would end up with A. anyway. The similarity with D. is that due to the wrapper, no higher level code needs to be changed.)
2019-01-04 12:09:02 +00:00
struct tl_parts *ntl = talloc_zero(tl, struct tl_parts);
tl->next = ntl;
tl = ntl;
} else if (bstr_equals0(f_type, "no_chapters")) {
tl->disable_chapters = true;
} else {
goto error;
}
} else {
if (!p.filename)
goto error;
MP_TARRAY_APPEND(tl, tl->parts, tl->num_parts, p);
}
}
demux, demux_edl: add extension for tracks sourced from separate streams This commit adds an extension to mpv EDL, which basically allows you to do the same as --audio-file, --external-file, etc. in a single EDL file. This is a relatively quick & dirty implementation. The dirty part lies in the fact that several shortcuts are taken. For example, struct timeline now forms a singly linked list, which is really weird, but also means the other timeline using demuxers (cue, mkv) don't need to be touched. Also, memory management becomes even worse (weird object ownership rules that are just fragile WTFs). There are some other dubious small changes, mostly related to the weird representation of separate streams. demux_timeline.c contains the actual implementation of the separate stream handling. For the most part, most things that used to be on the top level are now in struct virtual_source, of which one for each separate stream exists. This is basically like running multiple demux_edl.c in parallel. Some changes could strictly speaking be split into a separate commit, such as the stream_map type change. Mostly untested. Seems to work for the intended purpose. Potential for regressions for other timeline uses (like ordered chapters) is probably low. One thing which could definitely break and which I didn't test is the pseudo-DASH fragmented EDL code, of which ytdl can trigger various forms in obscure situations. (Uh why don't we have a test suite.) Background: The intention is to use this for the ytdl wrapper. A certain streaming site from a particularly brain damaged and plain evil Silicon Valley company usually provides streams as separate audio and video streams. The ytdl wrapper simply does use audio-add (i.e. adding it as external track, like with --audio-file), which works mostly fine. Unfortunately, mpv manages caching completely separately for external files. This has the following potential problems: 1. Seek ranges are rendered incorrectly. They always use the "main" stream, in this case the video stream. E.g. clicking into a cached range on the OSC could trigger a low level seek if the audio stream is actually not cached at the target position. 2. The stream cache bloats unnecessarily. Each stream may allocate the full configured maximum cache size, which is not what the user intends to do. Cached ranges are not pruned the same way, which creates disjoint cache ranges, which only use memory and won't help with fast seeking or playback. 3. mpv will try to aggressively read from both streams. This is done from different threads, with no regard which stream is more important. So it might happen that one stream starves the other one, especially if they have different bitrates. 4. Every stream will use a separate thread, which is an unnecessary waste of system resources. In theory, the following solutions are available (this commit works towards D): A. Centrally manage reading and caching of all streams. A single thread would do all I/O, and decide from which stream it should read next. As long as the total TCP/socket buffering is not too high, this should be effective to avoid starvation issues. This can also manage the cached ranges better. It would also get rid of the quite useless additional demuxer threads. This solution is conceptually simple, but requires refactoring the entire demuxer middle layer. B. Attempt to coordinate the demuxer threads. This would maintain a shared cache and readahead state to solve the mentioned problems explicitly. While this sounds simple and like an incremental change, it's probably hard to implement, creates more messy special cases, solution A. seems just a better and simpler variant of this. (On the other hand, A. requires refactoring more code.) C. Render an intersection of the seek ranges across all streams. This fixes only problem 1. D. Merge all streams in a dedicated wrapper demuxer. The general demuxer layer remains unchanged, and reading from separate streams is handled as special case. This effectively achieves the same as A. In particular, caching is simply handled by the usual demuxer cache layer, which sees the wrapper demuxer as a single stream of interleaved packets. One implementation variant of this is to reuse the EDL infrastructure, which this commit does. All in all, solution A would be preferable, because it's cleaner and works for all external streams in general. Some previous commit tried to prepare for implementing solution A. This could still happen. But it could take years until this is finally seriously started and finished. In any case, this commit doesn't block or complicate such attempts, which is also why it's the way to go. It's worth mentioning that original mplayer handles external files by creating a wrapper demuxer. This is like a less ideal mixture of A. and D. (The similarity with A. is that extending the mplayer approach to be fully dynamic and without certain disadvantages caused by the wrapper would end up with A. anyway. The similarity with D. is that due to the wrapper, no higher level code needs to be changed.)
2019-01-04 12:09:02 +00:00
if (!root->num_parts)
goto error;
demux, demux_edl: add extension for tracks sourced from separate streams This commit adds an extension to mpv EDL, which basically allows you to do the same as --audio-file, --external-file, etc. in a single EDL file. This is a relatively quick & dirty implementation. The dirty part lies in the fact that several shortcuts are taken. For example, struct timeline now forms a singly linked list, which is really weird, but also means the other timeline using demuxers (cue, mkv) don't need to be touched. Also, memory management becomes even worse (weird object ownership rules that are just fragile WTFs). There are some other dubious small changes, mostly related to the weird representation of separate streams. demux_timeline.c contains the actual implementation of the separate stream handling. For the most part, most things that used to be on the top level are now in struct virtual_source, of which one for each separate stream exists. This is basically like running multiple demux_edl.c in parallel. Some changes could strictly speaking be split into a separate commit, such as the stream_map type change. Mostly untested. Seems to work for the intended purpose. Potential for regressions for other timeline uses (like ordered chapters) is probably low. One thing which could definitely break and which I didn't test is the pseudo-DASH fragmented EDL code, of which ytdl can trigger various forms in obscure situations. (Uh why don't we have a test suite.) Background: The intention is to use this for the ytdl wrapper. A certain streaming site from a particularly brain damaged and plain evil Silicon Valley company usually provides streams as separate audio and video streams. The ytdl wrapper simply does use audio-add (i.e. adding it as external track, like with --audio-file), which works mostly fine. Unfortunately, mpv manages caching completely separately for external files. This has the following potential problems: 1. Seek ranges are rendered incorrectly. They always use the "main" stream, in this case the video stream. E.g. clicking into a cached range on the OSC could trigger a low level seek if the audio stream is actually not cached at the target position. 2. The stream cache bloats unnecessarily. Each stream may allocate the full configured maximum cache size, which is not what the user intends to do. Cached ranges are not pruned the same way, which creates disjoint cache ranges, which only use memory and won't help with fast seeking or playback. 3. mpv will try to aggressively read from both streams. This is done from different threads, with no regard which stream is more important. So it might happen that one stream starves the other one, especially if they have different bitrates. 4. Every stream will use a separate thread, which is an unnecessary waste of system resources. In theory, the following solutions are available (this commit works towards D): A. Centrally manage reading and caching of all streams. A single thread would do all I/O, and decide from which stream it should read next. As long as the total TCP/socket buffering is not too high, this should be effective to avoid starvation issues. This can also manage the cached ranges better. It would also get rid of the quite useless additional demuxer threads. This solution is conceptually simple, but requires refactoring the entire demuxer middle layer. B. Attempt to coordinate the demuxer threads. This would maintain a shared cache and readahead state to solve the mentioned problems explicitly. While this sounds simple and like an incremental change, it's probably hard to implement, creates more messy special cases, solution A. seems just a better and simpler variant of this. (On the other hand, A. requires refactoring more code.) C. Render an intersection of the seek ranges across all streams. This fixes only problem 1. D. Merge all streams in a dedicated wrapper demuxer. The general demuxer layer remains unchanged, and reading from separate streams is handled as special case. This effectively achieves the same as A. In particular, caching is simply handled by the usual demuxer cache layer, which sees the wrapper demuxer as a single stream of interleaved packets. One implementation variant of this is to reuse the EDL infrastructure, which this commit does. All in all, solution A would be preferable, because it's cleaner and works for all external streams in general. Some previous commit tried to prepare for implementing solution A. This could still happen. But it could take years until this is finally seriously started and finished. In any case, this commit doesn't block or complicate such attempts, which is also why it's the way to go. It's worth mentioning that original mplayer handles external files by creating a wrapper demuxer. This is like a less ideal mixture of A. and D. (The similarity with A. is that extending the mplayer approach to be fully dynamic and without certain disadvantages caused by the wrapper would end up with A. anyway. The similarity with D. is that due to the wrapper, no higher level code needs to be changed.)
2019-01-04 12:09:02 +00:00
return root;
error:
demux, demux_edl: add extension for tracks sourced from separate streams This commit adds an extension to mpv EDL, which basically allows you to do the same as --audio-file, --external-file, etc. in a single EDL file. This is a relatively quick & dirty implementation. The dirty part lies in the fact that several shortcuts are taken. For example, struct timeline now forms a singly linked list, which is really weird, but also means the other timeline using demuxers (cue, mkv) don't need to be touched. Also, memory management becomes even worse (weird object ownership rules that are just fragile WTFs). There are some other dubious small changes, mostly related to the weird representation of separate streams. demux_timeline.c contains the actual implementation of the separate stream handling. For the most part, most things that used to be on the top level are now in struct virtual_source, of which one for each separate stream exists. This is basically like running multiple demux_edl.c in parallel. Some changes could strictly speaking be split into a separate commit, such as the stream_map type change. Mostly untested. Seems to work for the intended purpose. Potential for regressions for other timeline uses (like ordered chapters) is probably low. One thing which could definitely break and which I didn't test is the pseudo-DASH fragmented EDL code, of which ytdl can trigger various forms in obscure situations. (Uh why don't we have a test suite.) Background: The intention is to use this for the ytdl wrapper. A certain streaming site from a particularly brain damaged and plain evil Silicon Valley company usually provides streams as separate audio and video streams. The ytdl wrapper simply does use audio-add (i.e. adding it as external track, like with --audio-file), which works mostly fine. Unfortunately, mpv manages caching completely separately for external files. This has the following potential problems: 1. Seek ranges are rendered incorrectly. They always use the "main" stream, in this case the video stream. E.g. clicking into a cached range on the OSC could trigger a low level seek if the audio stream is actually not cached at the target position. 2. The stream cache bloats unnecessarily. Each stream may allocate the full configured maximum cache size, which is not what the user intends to do. Cached ranges are not pruned the same way, which creates disjoint cache ranges, which only use memory and won't help with fast seeking or playback. 3. mpv will try to aggressively read from both streams. This is done from different threads, with no regard which stream is more important. So it might happen that one stream starves the other one, especially if they have different bitrates. 4. Every stream will use a separate thread, which is an unnecessary waste of system resources. In theory, the following solutions are available (this commit works towards D): A. Centrally manage reading and caching of all streams. A single thread would do all I/O, and decide from which stream it should read next. As long as the total TCP/socket buffering is not too high, this should be effective to avoid starvation issues. This can also manage the cached ranges better. It would also get rid of the quite useless additional demuxer threads. This solution is conceptually simple, but requires refactoring the entire demuxer middle layer. B. Attempt to coordinate the demuxer threads. This would maintain a shared cache and readahead state to solve the mentioned problems explicitly. While this sounds simple and like an incremental change, it's probably hard to implement, creates more messy special cases, solution A. seems just a better and simpler variant of this. (On the other hand, A. requires refactoring more code.) C. Render an intersection of the seek ranges across all streams. This fixes only problem 1. D. Merge all streams in a dedicated wrapper demuxer. The general demuxer layer remains unchanged, and reading from separate streams is handled as special case. This effectively achieves the same as A. In particular, caching is simply handled by the usual demuxer cache layer, which sees the wrapper demuxer as a single stream of interleaved packets. One implementation variant of this is to reuse the EDL infrastructure, which this commit does. All in all, solution A would be preferable, because it's cleaner and works for all external streams in general. Some previous commit tried to prepare for implementing solution A. This could still happen. But it could take years until this is finally seriously started and finished. In any case, this commit doesn't block or complicate such attempts, which is also why it's the way to go. It's worth mentioning that original mplayer handles external files by creating a wrapper demuxer. This is like a less ideal mixture of A. and D. (The similarity with A. is that extending the mplayer approach to be fully dynamic and without certain disadvantages caused by the wrapper would end up with A. anyway. The similarity with D. is that due to the wrapper, no higher level code needs to be changed.)
2019-01-04 12:09:02 +00:00
talloc_free(root);
return NULL;
}
static struct demuxer *open_source(struct timeline *tl, char *filename)
{
for (int n = 0; n < tl->num_sources; n++) {
struct demuxer *d = tl->sources[n];
if (strcmp(d->stream->url, filename) == 0)
return d;
}
struct demuxer_params params = {
.init_fragment = tl->init_fragment,
};
struct demuxer *d = demux_open_url(filename, &params, tl->cancel, tl->global);
if (d) {
MP_TARRAY_APPEND(tl, tl->sources, tl->num_sources, d);
} else {
MP_ERR(tl, "EDL: Could not open source file '%s'.\n", filename);
}
return d;
}
static double demuxer_chapter_time(struct demuxer *demuxer, int n)
{
if (n < 0 || n >= demuxer->num_chapters)
return -1;
return demuxer->chapters[n].pts;
}
// Append all chapters from src to the chapters array.
// Ignore chapters outside of the given time range.
static void copy_chapters(struct demux_chapter **chapters, int *num_chapters,
struct demuxer *src, double start, double len,
double dest_offset)
{
for (int n = 0; n < src->num_chapters; n++) {
double time = demuxer_chapter_time(src, n);
if (time >= start && time <= start + len) {
struct demux_chapter ch = {
.pts = dest_offset + time - start,
.metadata = mp_tags_dup(*chapters, src->chapters[n].metadata),
};
MP_TARRAY_APPEND(NULL, *chapters, *num_chapters, ch);
}
}
}
static void resolve_timestamps(struct tl_part *part, struct demuxer *demuxer)
{
if (part->chapter_ts) {
double start = demuxer_chapter_time(demuxer, part->offset);
double length = part->length;
double end = length;
if (end >= 0)
end = demuxer_chapter_time(demuxer, part->offset + part->length);
if (end >= 0 && start >= 0)
length = end - start;
part->offset = start;
part->length = length;
}
if (!part->offset_set)
part->offset = demuxer->start_time;
}
static void build_timeline(struct timeline *tl, struct tl_parts *parts)
{
tl->track_layout = NULL;
tl->dash = parts->dash;
if (parts->init_fragment_url && parts->init_fragment_url[0]) {
MP_VERBOSE(tl, "Opening init fragment...\n");
stream_t *s = stream_create(parts->init_fragment_url, STREAM_READ,
tl->cancel, tl->global);
if (s)
tl->init_fragment = stream_read_complete(s, tl, 1000000);
free_stream(s);
if (!tl->init_fragment.len) {
MP_ERR(tl, "Could not read init fragment.\n");
goto error;
}
struct demuxer_params params = {
.init_fragment = tl->init_fragment,
};
tl->track_layout = demux_open_url("memory://", &params, tl->cancel,
tl->global);
if (!tl->track_layout) {
MP_ERR(tl, "Could not demux init fragment.\n");
goto error;
}
}
tl->parts = talloc_array_ptrtype(tl, tl->parts, parts->num_parts + 1);
double starttime = 0;
for (int n = 0; n < parts->num_parts; n++) {
struct tl_part *part = &parts->parts[n];
struct demuxer *source = NULL;
if (tl->dash) {
part->offset = starttime;
if (part->length <= 0)
MP_WARN(tl, "Segment %d has unknown duration.\n", n);
if (part->offset_set)
MP_WARN(tl, "Offsets are ignored.\n");
demux, demux_edl: add extension for tracks sourced from separate streams This commit adds an extension to mpv EDL, which basically allows you to do the same as --audio-file, --external-file, etc. in a single EDL file. This is a relatively quick & dirty implementation. The dirty part lies in the fact that several shortcuts are taken. For example, struct timeline now forms a singly linked list, which is really weird, but also means the other timeline using demuxers (cue, mkv) don't need to be touched. Also, memory management becomes even worse (weird object ownership rules that are just fragile WTFs). There are some other dubious small changes, mostly related to the weird representation of separate streams. demux_timeline.c contains the actual implementation of the separate stream handling. For the most part, most things that used to be on the top level are now in struct virtual_source, of which one for each separate stream exists. This is basically like running multiple demux_edl.c in parallel. Some changes could strictly speaking be split into a separate commit, such as the stream_map type change. Mostly untested. Seems to work for the intended purpose. Potential for regressions for other timeline uses (like ordered chapters) is probably low. One thing which could definitely break and which I didn't test is the pseudo-DASH fragmented EDL code, of which ytdl can trigger various forms in obscure situations. (Uh why don't we have a test suite.) Background: The intention is to use this for the ytdl wrapper. A certain streaming site from a particularly brain damaged and plain evil Silicon Valley company usually provides streams as separate audio and video streams. The ytdl wrapper simply does use audio-add (i.e. adding it as external track, like with --audio-file), which works mostly fine. Unfortunately, mpv manages caching completely separately for external files. This has the following potential problems: 1. Seek ranges are rendered incorrectly. They always use the "main" stream, in this case the video stream. E.g. clicking into a cached range on the OSC could trigger a low level seek if the audio stream is actually not cached at the target position. 2. The stream cache bloats unnecessarily. Each stream may allocate the full configured maximum cache size, which is not what the user intends to do. Cached ranges are not pruned the same way, which creates disjoint cache ranges, which only use memory and won't help with fast seeking or playback. 3. mpv will try to aggressively read from both streams. This is done from different threads, with no regard which stream is more important. So it might happen that one stream starves the other one, especially if they have different bitrates. 4. Every stream will use a separate thread, which is an unnecessary waste of system resources. In theory, the following solutions are available (this commit works towards D): A. Centrally manage reading and caching of all streams. A single thread would do all I/O, and decide from which stream it should read next. As long as the total TCP/socket buffering is not too high, this should be effective to avoid starvation issues. This can also manage the cached ranges better. It would also get rid of the quite useless additional demuxer threads. This solution is conceptually simple, but requires refactoring the entire demuxer middle layer. B. Attempt to coordinate the demuxer threads. This would maintain a shared cache and readahead state to solve the mentioned problems explicitly. While this sounds simple and like an incremental change, it's probably hard to implement, creates more messy special cases, solution A. seems just a better and simpler variant of this. (On the other hand, A. requires refactoring more code.) C. Render an intersection of the seek ranges across all streams. This fixes only problem 1. D. Merge all streams in a dedicated wrapper demuxer. The general demuxer layer remains unchanged, and reading from separate streams is handled as special case. This effectively achieves the same as A. In particular, caching is simply handled by the usual demuxer cache layer, which sees the wrapper demuxer as a single stream of interleaved packets. One implementation variant of this is to reuse the EDL infrastructure, which this commit does. All in all, solution A would be preferable, because it's cleaner and works for all external streams in general. Some previous commit tried to prepare for implementing solution A. This could still happen. But it could take years until this is finally seriously started and finished. In any case, this commit doesn't block or complicate such attempts, which is also why it's the way to go. It's worth mentioning that original mplayer handles external files by creating a wrapper demuxer. This is like a less ideal mixture of A. and D. (The similarity with A. is that extending the mplayer approach to be fully dynamic and without certain disadvantages caused by the wrapper would end up with A. anyway. The similarity with D. is that due to the wrapper, no higher level code needs to be changed.)
2019-01-04 12:09:02 +00:00
if (tl->demuxer)
tl->demuxer->is_network = true;
if (!tl->track_layout) {
demux, demux_edl: add extension for tracks sourced from separate streams This commit adds an extension to mpv EDL, which basically allows you to do the same as --audio-file, --external-file, etc. in a single EDL file. This is a relatively quick & dirty implementation. The dirty part lies in the fact that several shortcuts are taken. For example, struct timeline now forms a singly linked list, which is really weird, but also means the other timeline using demuxers (cue, mkv) don't need to be touched. Also, memory management becomes even worse (weird object ownership rules that are just fragile WTFs). There are some other dubious small changes, mostly related to the weird representation of separate streams. demux_timeline.c contains the actual implementation of the separate stream handling. For the most part, most things that used to be on the top level are now in struct virtual_source, of which one for each separate stream exists. This is basically like running multiple demux_edl.c in parallel. Some changes could strictly speaking be split into a separate commit, such as the stream_map type change. Mostly untested. Seems to work for the intended purpose. Potential for regressions for other timeline uses (like ordered chapters) is probably low. One thing which could definitely break and which I didn't test is the pseudo-DASH fragmented EDL code, of which ytdl can trigger various forms in obscure situations. (Uh why don't we have a test suite.) Background: The intention is to use this for the ytdl wrapper. A certain streaming site from a particularly brain damaged and plain evil Silicon Valley company usually provides streams as separate audio and video streams. The ytdl wrapper simply does use audio-add (i.e. adding it as external track, like with --audio-file), which works mostly fine. Unfortunately, mpv manages caching completely separately for external files. This has the following potential problems: 1. Seek ranges are rendered incorrectly. They always use the "main" stream, in this case the video stream. E.g. clicking into a cached range on the OSC could trigger a low level seek if the audio stream is actually not cached at the target position. 2. The stream cache bloats unnecessarily. Each stream may allocate the full configured maximum cache size, which is not what the user intends to do. Cached ranges are not pruned the same way, which creates disjoint cache ranges, which only use memory and won't help with fast seeking or playback. 3. mpv will try to aggressively read from both streams. This is done from different threads, with no regard which stream is more important. So it might happen that one stream starves the other one, especially if they have different bitrates. 4. Every stream will use a separate thread, which is an unnecessary waste of system resources. In theory, the following solutions are available (this commit works towards D): A. Centrally manage reading and caching of all streams. A single thread would do all I/O, and decide from which stream it should read next. As long as the total TCP/socket buffering is not too high, this should be effective to avoid starvation issues. This can also manage the cached ranges better. It would also get rid of the quite useless additional demuxer threads. This solution is conceptually simple, but requires refactoring the entire demuxer middle layer. B. Attempt to coordinate the demuxer threads. This would maintain a shared cache and readahead state to solve the mentioned problems explicitly. While this sounds simple and like an incremental change, it's probably hard to implement, creates more messy special cases, solution A. seems just a better and simpler variant of this. (On the other hand, A. requires refactoring more code.) C. Render an intersection of the seek ranges across all streams. This fixes only problem 1. D. Merge all streams in a dedicated wrapper demuxer. The general demuxer layer remains unchanged, and reading from separate streams is handled as special case. This effectively achieves the same as A. In particular, caching is simply handled by the usual demuxer cache layer, which sees the wrapper demuxer as a single stream of interleaved packets. One implementation variant of this is to reuse the EDL infrastructure, which this commit does. All in all, solution A would be preferable, because it's cleaner and works for all external streams in general. Some previous commit tried to prepare for implementing solution A. This could still happen. But it could take years until this is finally seriously started and finished. In any case, this commit doesn't block or complicate such attempts, which is also why it's the way to go. It's worth mentioning that original mplayer handles external files by creating a wrapper demuxer. This is like a less ideal mixture of A. and D. (The similarity with A. is that extending the mplayer approach to be fully dynamic and without certain disadvantages caused by the wrapper would end up with A. anyway. The similarity with D. is that due to the wrapper, no higher level code needs to be changed.)
2019-01-04 12:09:02 +00:00
tl->track_layout = open_source(tl, part->filename);
if (!tl->track_layout)
goto error;
}
} else {
MP_VERBOSE(tl, "Opening segment %d...\n", n);
source = open_source(tl, part->filename);
if (!source)
goto error;
resolve_timestamps(part, source);
double end_time = source->duration;
if (end_time >= 0)
end_time += source->start_time;
// Unknown length => use rest of the file. If duration is unknown, make
// something up.
if (part->length < 0) {
if (end_time < 0) {
MP_WARN(tl, "EDL: source file '%s' has unknown duration.\n",
part->filename);
end_time = 1;
}
part->length = end_time - part->offset;
} else if (end_time >= 0) {
double end_part = part->offset + part->length;
if (end_part > end_time) {
MP_WARN(tl, "EDL: entry %d uses %f "
"seconds, but file has only %f seconds.\n",
n, end_part, end_time);
}
}
if (!parts->disable_chapters) {
// Add a chapter between each file.
struct demux_chapter ch = {
.pts = starttime,
.metadata = talloc_zero(tl, struct mp_tags),
};
mp_tags_set_str(ch.metadata, "title",
part->title ? part->title : part->filename);
MP_TARRAY_APPEND(tl, tl->chapters, tl->num_chapters, ch);
// Also copy the source file's chapters for the relevant parts
copy_chapters(&tl->chapters, &tl->num_chapters, source,
part->offset, part->length, starttime);
}
}
tl->parts[n] = (struct timeline_part) {
.start = starttime,
.source_start = part->offset,
.source = source,
.url = talloc_strdup(tl, part->filename),
};
starttime += part->length;
demux, demux_edl: add extension for tracks sourced from separate streams This commit adds an extension to mpv EDL, which basically allows you to do the same as --audio-file, --external-file, etc. in a single EDL file. This is a relatively quick & dirty implementation. The dirty part lies in the fact that several shortcuts are taken. For example, struct timeline now forms a singly linked list, which is really weird, but also means the other timeline using demuxers (cue, mkv) don't need to be touched. Also, memory management becomes even worse (weird object ownership rules that are just fragile WTFs). There are some other dubious small changes, mostly related to the weird representation of separate streams. demux_timeline.c contains the actual implementation of the separate stream handling. For the most part, most things that used to be on the top level are now in struct virtual_source, of which one for each separate stream exists. This is basically like running multiple demux_edl.c in parallel. Some changes could strictly speaking be split into a separate commit, such as the stream_map type change. Mostly untested. Seems to work for the intended purpose. Potential for regressions for other timeline uses (like ordered chapters) is probably low. One thing which could definitely break and which I didn't test is the pseudo-DASH fragmented EDL code, of which ytdl can trigger various forms in obscure situations. (Uh why don't we have a test suite.) Background: The intention is to use this for the ytdl wrapper. A certain streaming site from a particularly brain damaged and plain evil Silicon Valley company usually provides streams as separate audio and video streams. The ytdl wrapper simply does use audio-add (i.e. adding it as external track, like with --audio-file), which works mostly fine. Unfortunately, mpv manages caching completely separately for external files. This has the following potential problems: 1. Seek ranges are rendered incorrectly. They always use the "main" stream, in this case the video stream. E.g. clicking into a cached range on the OSC could trigger a low level seek if the audio stream is actually not cached at the target position. 2. The stream cache bloats unnecessarily. Each stream may allocate the full configured maximum cache size, which is not what the user intends to do. Cached ranges are not pruned the same way, which creates disjoint cache ranges, which only use memory and won't help with fast seeking or playback. 3. mpv will try to aggressively read from both streams. This is done from different threads, with no regard which stream is more important. So it might happen that one stream starves the other one, especially if they have different bitrates. 4. Every stream will use a separate thread, which is an unnecessary waste of system resources. In theory, the following solutions are available (this commit works towards D): A. Centrally manage reading and caching of all streams. A single thread would do all I/O, and decide from which stream it should read next. As long as the total TCP/socket buffering is not too high, this should be effective to avoid starvation issues. This can also manage the cached ranges better. It would also get rid of the quite useless additional demuxer threads. This solution is conceptually simple, but requires refactoring the entire demuxer middle layer. B. Attempt to coordinate the demuxer threads. This would maintain a shared cache and readahead state to solve the mentioned problems explicitly. While this sounds simple and like an incremental change, it's probably hard to implement, creates more messy special cases, solution A. seems just a better and simpler variant of this. (On the other hand, A. requires refactoring more code.) C. Render an intersection of the seek ranges across all streams. This fixes only problem 1. D. Merge all streams in a dedicated wrapper demuxer. The general demuxer layer remains unchanged, and reading from separate streams is handled as special case. This effectively achieves the same as A. In particular, caching is simply handled by the usual demuxer cache layer, which sees the wrapper demuxer as a single stream of interleaved packets. One implementation variant of this is to reuse the EDL infrastructure, which this commit does. All in all, solution A would be preferable, because it's cleaner and works for all external streams in general. Some previous commit tried to prepare for implementing solution A. This could still happen. But it could take years until this is finally seriously started and finished. In any case, this commit doesn't block or complicate such attempts, which is also why it's the way to go. It's worth mentioning that original mplayer handles external files by creating a wrapper demuxer. This is like a less ideal mixture of A. and D. (The similarity with A. is that extending the mplayer approach to be fully dynamic and without certain disadvantages caused by the wrapper would end up with A. anyway. The similarity with D. is that due to the wrapper, no higher level code needs to be changed.)
2019-01-04 12:09:02 +00:00
if (source && !tl->track_layout)
tl->track_layout = source;
}
tl->parts[parts->num_parts] = (struct timeline_part) {.start = starttime};
tl->num_parts = parts->num_parts;
return;
error:
tl->num_parts = 0;
tl->num_chapters = 0;
}
// For security, don't allow relative or absolute paths, only plain filenames.
// Also, make these filenames relative to the edl source file.
static void fix_filenames(struct tl_parts *parts, char *source_path)
{
struct bstr dirname = mp_dirname(source_path);
for (int n = 0; n < parts->num_parts; n++) {
struct tl_part *part = &parts->parts[n];
char *filename = mp_basename(part->filename); // plain filename only
part->filename = mp_path_join_bstr(parts, dirname, bstr0(filename));
}
}
static void build_mpv_edl_timeline(struct timeline *tl)
{
struct priv *p = tl->demuxer->priv;
demux, demux_edl: add extension for tracks sourced from separate streams This commit adds an extension to mpv EDL, which basically allows you to do the same as --audio-file, --external-file, etc. in a single EDL file. This is a relatively quick & dirty implementation. The dirty part lies in the fact that several shortcuts are taken. For example, struct timeline now forms a singly linked list, which is really weird, but also means the other timeline using demuxers (cue, mkv) don't need to be touched. Also, memory management becomes even worse (weird object ownership rules that are just fragile WTFs). There are some other dubious small changes, mostly related to the weird representation of separate streams. demux_timeline.c contains the actual implementation of the separate stream handling. For the most part, most things that used to be on the top level are now in struct virtual_source, of which one for each separate stream exists. This is basically like running multiple demux_edl.c in parallel. Some changes could strictly speaking be split into a separate commit, such as the stream_map type change. Mostly untested. Seems to work for the intended purpose. Potential for regressions for other timeline uses (like ordered chapters) is probably low. One thing which could definitely break and which I didn't test is the pseudo-DASH fragmented EDL code, of which ytdl can trigger various forms in obscure situations. (Uh why don't we have a test suite.) Background: The intention is to use this for the ytdl wrapper. A certain streaming site from a particularly brain damaged and plain evil Silicon Valley company usually provides streams as separate audio and video streams. The ytdl wrapper simply does use audio-add (i.e. adding it as external track, like with --audio-file), which works mostly fine. Unfortunately, mpv manages caching completely separately for external files. This has the following potential problems: 1. Seek ranges are rendered incorrectly. They always use the "main" stream, in this case the video stream. E.g. clicking into a cached range on the OSC could trigger a low level seek if the audio stream is actually not cached at the target position. 2. The stream cache bloats unnecessarily. Each stream may allocate the full configured maximum cache size, which is not what the user intends to do. Cached ranges are not pruned the same way, which creates disjoint cache ranges, which only use memory and won't help with fast seeking or playback. 3. mpv will try to aggressively read from both streams. This is done from different threads, with no regard which stream is more important. So it might happen that one stream starves the other one, especially if they have different bitrates. 4. Every stream will use a separate thread, which is an unnecessary waste of system resources. In theory, the following solutions are available (this commit works towards D): A. Centrally manage reading and caching of all streams. A single thread would do all I/O, and decide from which stream it should read next. As long as the total TCP/socket buffering is not too high, this should be effective to avoid starvation issues. This can also manage the cached ranges better. It would also get rid of the quite useless additional demuxer threads. This solution is conceptually simple, but requires refactoring the entire demuxer middle layer. B. Attempt to coordinate the demuxer threads. This would maintain a shared cache and readahead state to solve the mentioned problems explicitly. While this sounds simple and like an incremental change, it's probably hard to implement, creates more messy special cases, solution A. seems just a better and simpler variant of this. (On the other hand, A. requires refactoring more code.) C. Render an intersection of the seek ranges across all streams. This fixes only problem 1. D. Merge all streams in a dedicated wrapper demuxer. The general demuxer layer remains unchanged, and reading from separate streams is handled as special case. This effectively achieves the same as A. In particular, caching is simply handled by the usual demuxer cache layer, which sees the wrapper demuxer as a single stream of interleaved packets. One implementation variant of this is to reuse the EDL infrastructure, which this commit does. All in all, solution A would be preferable, because it's cleaner and works for all external streams in general. Some previous commit tried to prepare for implementing solution A. This could still happen. But it could take years until this is finally seriously started and finished. In any case, this commit doesn't block or complicate such attempts, which is also why it's the way to go. It's worth mentioning that original mplayer handles external files by creating a wrapper demuxer. This is like a less ideal mixture of A. and D. (The similarity with A. is that extending the mplayer approach to be fully dynamic and without certain disadvantages caused by the wrapper would end up with A. anyway. The similarity with D. is that due to the wrapper, no higher level code needs to be changed.)
2019-01-04 12:09:02 +00:00
struct timeline *root_tl = tl;
struct tl_parts *root = parse_edl(p->data);
if (!root) {
MP_ERR(tl, "Error in EDL.\n");
return;
}
demux, demux_edl: add extension for tracks sourced from separate streams This commit adds an extension to mpv EDL, which basically allows you to do the same as --audio-file, --external-file, etc. in a single EDL file. This is a relatively quick & dirty implementation. The dirty part lies in the fact that several shortcuts are taken. For example, struct timeline now forms a singly linked list, which is really weird, but also means the other timeline using demuxers (cue, mkv) don't need to be touched. Also, memory management becomes even worse (weird object ownership rules that are just fragile WTFs). There are some other dubious small changes, mostly related to the weird representation of separate streams. demux_timeline.c contains the actual implementation of the separate stream handling. For the most part, most things that used to be on the top level are now in struct virtual_source, of which one for each separate stream exists. This is basically like running multiple demux_edl.c in parallel. Some changes could strictly speaking be split into a separate commit, such as the stream_map type change. Mostly untested. Seems to work for the intended purpose. Potential for regressions for other timeline uses (like ordered chapters) is probably low. One thing which could definitely break and which I didn't test is the pseudo-DASH fragmented EDL code, of which ytdl can trigger various forms in obscure situations. (Uh why don't we have a test suite.) Background: The intention is to use this for the ytdl wrapper. A certain streaming site from a particularly brain damaged and plain evil Silicon Valley company usually provides streams as separate audio and video streams. The ytdl wrapper simply does use audio-add (i.e. adding it as external track, like with --audio-file), which works mostly fine. Unfortunately, mpv manages caching completely separately for external files. This has the following potential problems: 1. Seek ranges are rendered incorrectly. They always use the "main" stream, in this case the video stream. E.g. clicking into a cached range on the OSC could trigger a low level seek if the audio stream is actually not cached at the target position. 2. The stream cache bloats unnecessarily. Each stream may allocate the full configured maximum cache size, which is not what the user intends to do. Cached ranges are not pruned the same way, which creates disjoint cache ranges, which only use memory and won't help with fast seeking or playback. 3. mpv will try to aggressively read from both streams. This is done from different threads, with no regard which stream is more important. So it might happen that one stream starves the other one, especially if they have different bitrates. 4. Every stream will use a separate thread, which is an unnecessary waste of system resources. In theory, the following solutions are available (this commit works towards D): A. Centrally manage reading and caching of all streams. A single thread would do all I/O, and decide from which stream it should read next. As long as the total TCP/socket buffering is not too high, this should be effective to avoid starvation issues. This can also manage the cached ranges better. It would also get rid of the quite useless additional demuxer threads. This solution is conceptually simple, but requires refactoring the entire demuxer middle layer. B. Attempt to coordinate the demuxer threads. This would maintain a shared cache and readahead state to solve the mentioned problems explicitly. While this sounds simple and like an incremental change, it's probably hard to implement, creates more messy special cases, solution A. seems just a better and simpler variant of this. (On the other hand, A. requires refactoring more code.) C. Render an intersection of the seek ranges across all streams. This fixes only problem 1. D. Merge all streams in a dedicated wrapper demuxer. The general demuxer layer remains unchanged, and reading from separate streams is handled as special case. This effectively achieves the same as A. In particular, caching is simply handled by the usual demuxer cache layer, which sees the wrapper demuxer as a single stream of interleaved packets. One implementation variant of this is to reuse the EDL infrastructure, which this commit does. All in all, solution A would be preferable, because it's cleaner and works for all external streams in general. Some previous commit tried to prepare for implementing solution A. This could still happen. But it could take years until this is finally seriously started and finished. In any case, this commit doesn't block or complicate such attempts, which is also why it's the way to go. It's worth mentioning that original mplayer handles external files by creating a wrapper demuxer. This is like a less ideal mixture of A. and D. (The similarity with A. is that extending the mplayer approach to be fully dynamic and without certain disadvantages caused by the wrapper would end up with A. anyway. The similarity with D. is that due to the wrapper, no higher level code needs to be changed.)
2019-01-04 12:09:02 +00:00
for (struct tl_parts *parts = root; parts; parts = parts->next) {
if (tl->demuxer)
MP_TARRAY_APPEND(tl, tl->sources, tl->num_sources, tl->demuxer);
if (!p->allow_any)
fix_filenames(parts, root_tl->demuxer->filename);
build_timeline(tl, parts);
if (parts->next) {
struct timeline *ntl = talloc_zero(tl, struct timeline);
*ntl = (struct timeline) {
.global = tl->global,
.log = tl->log,
.cancel = tl->cancel,
};
tl->next = ntl;
tl = ntl;
}
}
talloc_free(root);
}
static int try_open_file(struct demuxer *demuxer, enum demux_check check)
EDL: add support for new EDL file format The timeline code previously added to support Matroska ordered chapters allows constructing a playback timeline from segments picked from multiple source files. Add support for a new EDL format to make this machinery available for use with file formats other than Matroska and in a manner easier to use than creating files with ordered chapters. Unlike the old -edl option which specifies an additional file with edits to apply to the video file given as the main argument, the new EDL format is used by giving only the EDL file as the file to play; that file then contains the filename(s) to use as source files where actual video segments come from. Filename paths in the EDL file are ignored. Currently the source files are only searched for in the directory of the EDL file; support for a search path option will likely be added in the future. Format of the EDL files The first line in the file must be "mplayer EDL file, version 2". The rest of the lines belong to one of these classes: 1) lines specifying source files 2) empty lines 3) lines specifying timeline segments. Lines beginning with '<' specify source files. These lines first contain an identifier used to refer to the source file later, then the filename separated by whitespace. The identifier must start with a letter. Filenames that start or end with whitespace or contain newlines are not supported. On other lines '#' characters delimit comments. Lines that contain only whitespace after comments have been removed are ignored. Timeline segments must appear in the file in chronological order. Each segment has the following information associated with it: - duration - output start time - output end time (= output start time + duration) - source id (specifies the file the content of the segment comes from) - source start time (timestamp in the source file) - source end time (= source start time + duration) The output timestamps must form a continuous timeline from 0 to the end of the last segment, such that each new segment starts from the time the previous one ends at. Source files and times may change arbitrarily between segments. The general format for lines specifying timeline segments is [output time info] source_id [source time info] source_id must be an identifier defined on a '<' line. Both the time info parts consists of zero or more of the following elements: 1) timestamp 2) -timestamp 3) +duration 4) * 5) -* , where "timestamp" and "duration" are decimal numbers (computations are done with nanosecond precision). Whitespace around "+" and "-" is optional. 1) and 2) specify start and end time of the segment on output or source side. 3) specifies duration; the semantics are the same whether this appears on output or source side. 4) and 5) are ignored on the output side (they're always implicitly assumed). On the source side 4) specifies that the segment starts where the previous segment _using this source_ ended; if there was no previous segment time 0 is used. 5) specifies that the segment ends where the next segment using this source starts. Redundant information may be omitted. It will be filled in using the following rules: - output start for first segment is 0 - two of [output start, output end, duration] imply third - two of [source start, source end, duration] imply third - output start = output end of previous segment - output end = output start of next segment - if "*", source start = source end of earlier segment - if "-*", source end = source start of a later segment As a special rule, a last zero-duration segment without a source specification may appear. This will produce no corresponding segment in the resulting timeline, but can be used as syntax to specify the end time of the timeline (with effect equal to adding -time on the previous line). Examples: ----- begin ----- mplayer EDL file, version 2 < id1 filename 0 id1 123 100 id1 456 200 id1 789 300 ----- end ----- All segments come from the source file "filename". First segment (output time 0-100) comes from time 123-223, second 456-556, third 789-889. ----- begin ----- mplayer EDL file, version 2 < f filename f 60-120 f 600-660 f 30- 90 ----- end ----- Play first seconds 60-120 from the file, then 600-660, then 30-90. ----- begin ----- mplayer EDL file, version 2 < id1 filename1 < id2 filename2 +10 id1 * +10 id2 * +10 id1 * +10 id2 * +10 id1 * +10 id2 * ----- end ----- This plays time 0-10 from filename1, then 0-10 from filename1, then 10-20 from filename1, then 10-20 from filename2, then 20-30 from filename1, then 20-30 from filename2. ----- begin ----- mplayer EDL file, version 2 < t1 filename1 < t2 filename2 t1 * +2 # segment 1 +2 t2 100 # segment 2 t1 * # segment 3 t2 *-* # segment 4 t1 3 -* # segment 5 +0.111111 t2 102.5 # segment 6 7.37 t1 5 +1 # segment 7 ----- end ----- This rather pathological example illustrates the rules for filling in implied data. All the values can be determined by recursively applying the rules given above, and the full end result is this: +2 0-2 t1 0-2 # segment 1 +2 2-4 t2 100-102 # segment 2 +0.758889 4-4.758889 t1 2-2.758889 # segment 3 +0.5 4.4758889-5.258889 t2 102-102.5 # segment 4 +2 5.258889-7.258889 t1 3-5 # segment 5 +0.111111 7.258889-7.37 t2 102.5-102.611111 # segment 6 +1 7.37-8.37 t1 5-6 # segment 7
2011-02-14 11:05:35 +00:00
{
if (!demuxer->access_references)
return -1;
struct priv *p = talloc_zero(demuxer, struct priv);
demuxer->priv = p;
demuxer->fully_read = true;
EDL: add support for new EDL file format The timeline code previously added to support Matroska ordered chapters allows constructing a playback timeline from segments picked from multiple source files. Add support for a new EDL format to make this machinery available for use with file formats other than Matroska and in a manner easier to use than creating files with ordered chapters. Unlike the old -edl option which specifies an additional file with edits to apply to the video file given as the main argument, the new EDL format is used by giving only the EDL file as the file to play; that file then contains the filename(s) to use as source files where actual video segments come from. Filename paths in the EDL file are ignored. Currently the source files are only searched for in the directory of the EDL file; support for a search path option will likely be added in the future. Format of the EDL files The first line in the file must be "mplayer EDL file, version 2". The rest of the lines belong to one of these classes: 1) lines specifying source files 2) empty lines 3) lines specifying timeline segments. Lines beginning with '<' specify source files. These lines first contain an identifier used to refer to the source file later, then the filename separated by whitespace. The identifier must start with a letter. Filenames that start or end with whitespace or contain newlines are not supported. On other lines '#' characters delimit comments. Lines that contain only whitespace after comments have been removed are ignored. Timeline segments must appear in the file in chronological order. Each segment has the following information associated with it: - duration - output start time - output end time (= output start time + duration) - source id (specifies the file the content of the segment comes from) - source start time (timestamp in the source file) - source end time (= source start time + duration) The output timestamps must form a continuous timeline from 0 to the end of the last segment, such that each new segment starts from the time the previous one ends at. Source files and times may change arbitrarily between segments. The general format for lines specifying timeline segments is [output time info] source_id [source time info] source_id must be an identifier defined on a '<' line. Both the time info parts consists of zero or more of the following elements: 1) timestamp 2) -timestamp 3) +duration 4) * 5) -* , where "timestamp" and "duration" are decimal numbers (computations are done with nanosecond precision). Whitespace around "+" and "-" is optional. 1) and 2) specify start and end time of the segment on output or source side. 3) specifies duration; the semantics are the same whether this appears on output or source side. 4) and 5) are ignored on the output side (they're always implicitly assumed). On the source side 4) specifies that the segment starts where the previous segment _using this source_ ended; if there was no previous segment time 0 is used. 5) specifies that the segment ends where the next segment using this source starts. Redundant information may be omitted. It will be filled in using the following rules: - output start for first segment is 0 - two of [output start, output end, duration] imply third - two of [source start, source end, duration] imply third - output start = output end of previous segment - output end = output start of next segment - if "*", source start = source end of earlier segment - if "-*", source end = source start of a later segment As a special rule, a last zero-duration segment without a source specification may appear. This will produce no corresponding segment in the resulting timeline, but can be used as syntax to specify the end time of the timeline (with effect equal to adding -time on the previous line). Examples: ----- begin ----- mplayer EDL file, version 2 < id1 filename 0 id1 123 100 id1 456 200 id1 789 300 ----- end ----- All segments come from the source file "filename". First segment (output time 0-100) comes from time 123-223, second 456-556, third 789-889. ----- begin ----- mplayer EDL file, version 2 < f filename f 60-120 f 600-660 f 30- 90 ----- end ----- Play first seconds 60-120 from the file, then 600-660, then 30-90. ----- begin ----- mplayer EDL file, version 2 < id1 filename1 < id2 filename2 +10 id1 * +10 id2 * +10 id1 * +10 id2 * +10 id1 * +10 id2 * ----- end ----- This plays time 0-10 from filename1, then 0-10 from filename1, then 10-20 from filename1, then 10-20 from filename2, then 20-30 from filename1, then 20-30 from filename2. ----- begin ----- mplayer EDL file, version 2 < t1 filename1 < t2 filename2 t1 * +2 # segment 1 +2 t2 100 # segment 2 t1 * # segment 3 t2 *-* # segment 4 t1 3 -* # segment 5 +0.111111 t2 102.5 # segment 6 7.37 t1 5 +1 # segment 7 ----- end ----- This rather pathological example illustrates the rules for filling in implied data. All the values can be determined by recursively applying the rules given above, and the full end result is this: +2 0-2 t1 0-2 # segment 1 +2 2-4 t2 100-102 # segment 2 +0.758889 4-4.758889 t1 2-2.758889 # segment 3 +0.5 4.4758889-5.258889 t2 102-102.5 # segment 4 +2 5.258889-7.258889 t1 3-5 # segment 5 +0.111111 7.258889-7.37 t2 102.5-102.611111 # segment 6 +1 7.37-8.37 t1 5-6 # segment 7
2011-02-14 11:05:35 +00:00
struct stream *s = demuxer->stream;
if (s->info && strcmp(s->info->name, "edl") == 0) {
p->data = bstr0(s->path);
// Source is edl:// and not .edl => allow arbitrary paths
p->allow_any = true;
return 0;
}
if (check >= DEMUX_CHECK_UNSAFE) {
if (!bstr_equals0(stream_peek(s, strlen(HEADER)), HEADER))
return -1;
}
p->data = stream_read_complete(s, demuxer, 1000000);
if (p->data.start == NULL)
return -1;
bstr_eatstart0(&p->data, HEADER);
demux_close_stream(demuxer);
return 0;
EDL: add support for new EDL file format The timeline code previously added to support Matroska ordered chapters allows constructing a playback timeline from segments picked from multiple source files. Add support for a new EDL format to make this machinery available for use with file formats other than Matroska and in a manner easier to use than creating files with ordered chapters. Unlike the old -edl option which specifies an additional file with edits to apply to the video file given as the main argument, the new EDL format is used by giving only the EDL file as the file to play; that file then contains the filename(s) to use as source files where actual video segments come from. Filename paths in the EDL file are ignored. Currently the source files are only searched for in the directory of the EDL file; support for a search path option will likely be added in the future. Format of the EDL files The first line in the file must be "mplayer EDL file, version 2". The rest of the lines belong to one of these classes: 1) lines specifying source files 2) empty lines 3) lines specifying timeline segments. Lines beginning with '<' specify source files. These lines first contain an identifier used to refer to the source file later, then the filename separated by whitespace. The identifier must start with a letter. Filenames that start or end with whitespace or contain newlines are not supported. On other lines '#' characters delimit comments. Lines that contain only whitespace after comments have been removed are ignored. Timeline segments must appear in the file in chronological order. Each segment has the following information associated with it: - duration - output start time - output end time (= output start time + duration) - source id (specifies the file the content of the segment comes from) - source start time (timestamp in the source file) - source end time (= source start time + duration) The output timestamps must form a continuous timeline from 0 to the end of the last segment, such that each new segment starts from the time the previous one ends at. Source files and times may change arbitrarily between segments. The general format for lines specifying timeline segments is [output time info] source_id [source time info] source_id must be an identifier defined on a '<' line. Both the time info parts consists of zero or more of the following elements: 1) timestamp 2) -timestamp 3) +duration 4) * 5) -* , where "timestamp" and "duration" are decimal numbers (computations are done with nanosecond precision). Whitespace around "+" and "-" is optional. 1) and 2) specify start and end time of the segment on output or source side. 3) specifies duration; the semantics are the same whether this appears on output or source side. 4) and 5) are ignored on the output side (they're always implicitly assumed). On the source side 4) specifies that the segment starts where the previous segment _using this source_ ended; if there was no previous segment time 0 is used. 5) specifies that the segment ends where the next segment using this source starts. Redundant information may be omitted. It will be filled in using the following rules: - output start for first segment is 0 - two of [output start, output end, duration] imply third - two of [source start, source end, duration] imply third - output start = output end of previous segment - output end = output start of next segment - if "*", source start = source end of earlier segment - if "-*", source end = source start of a later segment As a special rule, a last zero-duration segment without a source specification may appear. This will produce no corresponding segment in the resulting timeline, but can be used as syntax to specify the end time of the timeline (with effect equal to adding -time on the previous line). Examples: ----- begin ----- mplayer EDL file, version 2 < id1 filename 0 id1 123 100 id1 456 200 id1 789 300 ----- end ----- All segments come from the source file "filename". First segment (output time 0-100) comes from time 123-223, second 456-556, third 789-889. ----- begin ----- mplayer EDL file, version 2 < f filename f 60-120 f 600-660 f 30- 90 ----- end ----- Play first seconds 60-120 from the file, then 600-660, then 30-90. ----- begin ----- mplayer EDL file, version 2 < id1 filename1 < id2 filename2 +10 id1 * +10 id2 * +10 id1 * +10 id2 * +10 id1 * +10 id2 * ----- end ----- This plays time 0-10 from filename1, then 0-10 from filename1, then 10-20 from filename1, then 10-20 from filename2, then 20-30 from filename1, then 20-30 from filename2. ----- begin ----- mplayer EDL file, version 2 < t1 filename1 < t2 filename2 t1 * +2 # segment 1 +2 t2 100 # segment 2 t1 * # segment 3 t2 *-* # segment 4 t1 3 -* # segment 5 +0.111111 t2 102.5 # segment 6 7.37 t1 5 +1 # segment 7 ----- end ----- This rather pathological example illustrates the rules for filling in implied data. All the values can be determined by recursively applying the rules given above, and the full end result is this: +2 0-2 t1 0-2 # segment 1 +2 2-4 t2 100-102 # segment 2 +0.758889 4-4.758889 t1 2-2.758889 # segment 3 +0.5 4.4758889-5.258889 t2 102-102.5 # segment 4 +2 5.258889-7.258889 t1 3-5 # segment 5 +0.111111 7.258889-7.37 t2 102.5-102.611111 # segment 6 +1 7.37-8.37 t1 5-6 # segment 7
2011-02-14 11:05:35 +00:00
}
const struct demuxer_desc demuxer_desc_edl = {
.name = "edl",
.desc = "Edit decision list",
.open = try_open_file,
.load_timeline = build_mpv_edl_timeline,
EDL: add support for new EDL file format The timeline code previously added to support Matroska ordered chapters allows constructing a playback timeline from segments picked from multiple source files. Add support for a new EDL format to make this machinery available for use with file formats other than Matroska and in a manner easier to use than creating files with ordered chapters. Unlike the old -edl option which specifies an additional file with edits to apply to the video file given as the main argument, the new EDL format is used by giving only the EDL file as the file to play; that file then contains the filename(s) to use as source files where actual video segments come from. Filename paths in the EDL file are ignored. Currently the source files are only searched for in the directory of the EDL file; support for a search path option will likely be added in the future. Format of the EDL files The first line in the file must be "mplayer EDL file, version 2". The rest of the lines belong to one of these classes: 1) lines specifying source files 2) empty lines 3) lines specifying timeline segments. Lines beginning with '<' specify source files. These lines first contain an identifier used to refer to the source file later, then the filename separated by whitespace. The identifier must start with a letter. Filenames that start or end with whitespace or contain newlines are not supported. On other lines '#' characters delimit comments. Lines that contain only whitespace after comments have been removed are ignored. Timeline segments must appear in the file in chronological order. Each segment has the following information associated with it: - duration - output start time - output end time (= output start time + duration) - source id (specifies the file the content of the segment comes from) - source start time (timestamp in the source file) - source end time (= source start time + duration) The output timestamps must form a continuous timeline from 0 to the end of the last segment, such that each new segment starts from the time the previous one ends at. Source files and times may change arbitrarily between segments. The general format for lines specifying timeline segments is [output time info] source_id [source time info] source_id must be an identifier defined on a '<' line. Both the time info parts consists of zero or more of the following elements: 1) timestamp 2) -timestamp 3) +duration 4) * 5) -* , where "timestamp" and "duration" are decimal numbers (computations are done with nanosecond precision). Whitespace around "+" and "-" is optional. 1) and 2) specify start and end time of the segment on output or source side. 3) specifies duration; the semantics are the same whether this appears on output or source side. 4) and 5) are ignored on the output side (they're always implicitly assumed). On the source side 4) specifies that the segment starts where the previous segment _using this source_ ended; if there was no previous segment time 0 is used. 5) specifies that the segment ends where the next segment using this source starts. Redundant information may be omitted. It will be filled in using the following rules: - output start for first segment is 0 - two of [output start, output end, duration] imply third - two of [source start, source end, duration] imply third - output start = output end of previous segment - output end = output start of next segment - if "*", source start = source end of earlier segment - if "-*", source end = source start of a later segment As a special rule, a last zero-duration segment without a source specification may appear. This will produce no corresponding segment in the resulting timeline, but can be used as syntax to specify the end time of the timeline (with effect equal to adding -time on the previous line). Examples: ----- begin ----- mplayer EDL file, version 2 < id1 filename 0 id1 123 100 id1 456 200 id1 789 300 ----- end ----- All segments come from the source file "filename". First segment (output time 0-100) comes from time 123-223, second 456-556, third 789-889. ----- begin ----- mplayer EDL file, version 2 < f filename f 60-120 f 600-660 f 30- 90 ----- end ----- Play first seconds 60-120 from the file, then 600-660, then 30-90. ----- begin ----- mplayer EDL file, version 2 < id1 filename1 < id2 filename2 +10 id1 * +10 id2 * +10 id1 * +10 id2 * +10 id1 * +10 id2 * ----- end ----- This plays time 0-10 from filename1, then 0-10 from filename1, then 10-20 from filename1, then 10-20 from filename2, then 20-30 from filename1, then 20-30 from filename2. ----- begin ----- mplayer EDL file, version 2 < t1 filename1 < t2 filename2 t1 * +2 # segment 1 +2 t2 100 # segment 2 t1 * # segment 3 t2 *-* # segment 4 t1 3 -* # segment 5 +0.111111 t2 102.5 # segment 6 7.37 t1 5 +1 # segment 7 ----- end ----- This rather pathological example illustrates the rules for filling in implied data. All the values can be determined by recursively applying the rules given above, and the full end result is this: +2 0-2 t1 0-2 # segment 1 +2 2-4 t2 100-102 # segment 2 +0.758889 4-4.758889 t1 2-2.758889 # segment 3 +0.5 4.4758889-5.258889 t2 102-102.5 # segment 4 +2 5.258889-7.258889 t1 3-5 # segment 5 +0.111111 7.258889-7.37 t2 102.5-102.611111 # segment 6 +1 7.37-8.37 t1 5-6 # segment 7
2011-02-14 11:05:35 +00:00
};